Used Keppler Hdc 3000, 5-Achsig for sale (61,453)

Condition: used, Braking resistor, charging resistor, damping resistor, filter resistor -Manufacturer: REO -Type: REOHM BW 155/3000/60 -Resistance values: 0.8-600 ohms -Continuous output: 30,000 p -Number: 1x resistors available Hnsdpfsghnb Tsx Aagsl -Price: per piece -Weight: 10 kg/piece

Condition: good (used), Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, tie rod cylinder -Manufacturer: FMA Pokorny, hydraulic cylinder tie rod cylinder stroke 50 mm -Type: 50030-00-5 -Piston rod: Ø 16 mm Hnedpov N D H Uofx Aagsl -Dimensions: Ø 65 x 340 mm -Weight: 5.6 kg

Condition: good (used), Mounting plate, scribing/marking plate, measuring plate, measuring table, welding table, welding table, straightening plate -Plate: has a prism and scribing lines -1x Front side: with T-slot -Width: 1495 mm -Length: 3000 mm -Height: 302 mm -Sheet thickness: 80 mm -Plate: is equipped with supporting ribs -Number: 2x plates available -Price: per piece -Transport dimensions: 3170/1580/H302 mm Hodpfec T Sc Esx Aagonl -Weight: 2100 kg

Condition: good (used), Year of construction: 2013, Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: MTF, belt conveyor on solid base frame, height adjustable -Type: GL-HM 140 -Speed: 9 m/min Hsdpfotp Rfpsx Aagjnl -Belt width: 275 mm -Conveyor length: 3000 mm -Drive: ATB 0.18 kW, see photo type plate -Transport dimensions: 3060/500/H930 mm -Weight: 89 kg

Condition: good (used), Fork carrier, forklift blade, pallet fork, forklift fork, for wheel loader, forklift, telehandler, forklift -Fork carriage: with forks -Load capacity: 12,000 kg Hnedpfxeu Inqfj Aagol -Make: Still -Forks: length 1600 mm / 200 x 100 mm -Installation dimensions: see photos -Dimensions total: 3000/2100/H1530 mm -Weight: 2480 kg

Condition: used, Alignment ruler, alignment rail, steel ruler -Angle: 90° Hodpfx Aajfiqrqegsnl -Dimensions: 3000/100/H15 mm -Weight: 28 kg

Condition: new, x-travel: 3000y-travel: 2000z-travel: 250performance of pump (flushing): 37 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! advantages No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum stole Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics Hsdpohqnl Tefx Aagenl plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤ 1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour.

Condition: ready for operation (used), Fanuc A06B-0758-B3000 #3000 AC Spindle Motor SN: C98300018, used, good condition, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Hnodpfxjur Dape Aagel

Condition: ready for operation (used), Fanuc A06B-0751-B190#3000 AC Spindle Motor, hole spacing of the mounting holes: 102 x 102 mm, Ø drive shaft: 28 mm, used, good condition, 100% functional Hnedpfx Asi D H I Uoagsl

Condition: ready for operation (used), Fanuc A06B-0032-B575 B2/3000 AC servo motor, serial no. according to photo, used, good condition, 100% functional, scope of supply according to photos Hjdpfei D Hvxox Aagonl

Condition: ready for operation (used), HR-Heligaron T image intensifier CXI-3000 Series & CXI-5600.532-1.024 FOV + CV-M4+CL camera, used, minor signs of use, 100% functional, scope of delivery as per photos Hodpfxjl Ecimj Aagenl

Condition: excellent (used), Year of construction: 2011, operating hours: 38,000 h, clamping force: 850 kN, screw diameter: 80 mm, clearance between the columns: 1,140 mm, mold height (min.): 500 mm, pressure: 2,400 bar, power: 6.6 kW (8.97 HP), Year: 2011 Control type: MC5 Operating hours: 38,000 h Storage location: MECA PLASTIC Availability: IMMEDIATE Clamping force: 850 T Opening stroke: 1600 mm Distance between tie bars: 1140 mm x 1140 mm Platen dimensions: 1600 mm x 1600 mm Min./max. mould height: 500/1100 mm Max. distance between platens: 2700 mm Screw diameter: 80 mm Hnjdpewvp E Iofx Aagsl Screw length: 20D Capacity (cm³): 1810 Pressure (bars): 2328 Motor power: 90 kW Heating power: 36 kW Closing unit weight: 32 t Injection weight: 10 t Machine length: 2.30 m Machine width: 2.92 m Machine height: 2.51 m Cores: 6 HYDRAULIC CORES Robot interface: YES Bimetallic: YES Others: 12 sequential controls 1 robot KM LRX350

Condition: ready for operation (used), Phoenix Contact VL PPC 3000 industrial panel PC 2400184 SN:L100015397, used, normal signs of wear, 100% fully functional, scope of delivery as per photos. Hnsdpfx Aaox Et Tzegol

Condition: ready for operation (used), Phoenix Contact VL PPC 3000 industrial panel PC 2400184 SN:L100015408, used, normal signs of wear, 100% fully functional, scope of delivery as per photos. Hedpfxex Et T Is Aagsnl

Condition: ready for operation (used), Gero F 100-200/12SO high temperature furnace 201101895 - 30 - 3000°C / Cable length green: 3.9 m, connection cable: 3.00 m, used, good condition, 100% functional, scope of delivery as per photos Hnodpfx Aaex Erpnogel

Condition: ready for operation (used), Phoenix Contact VL PPC 3000 industrial panel PC 2400184 SN:1709B00358, operating system starts only in safe mode, used, normal signs of use, 100% functional, scope of delivery as shown in photos. Hnjdpox Et Tuefx Aagjl

Condition: ready for operation (used), Trumpf Laser TruMark 3000 marking laser controller, SN: L0131E1357, with 6m power cable and 2 keys, used, in good condition, 100% operational, scope of delivery as shown in the photos. ATTENTION: Please enquire separately for packing and shipping costs! Hnedpex Evakofx Aagsl

Condition: used, functionality: fully functional, machine/vehicle number: 2076, mileage: 924,000 km, power: 340 kW (462.27 HP), first registration: 02/2013, fuel type: diesel, empty load weight: 13,378 kg, overall weight: 26,000 kg, tire size: 315/80/22.5, axle configuration: 6x2, fuel: diesel, brakes: retarder, color: yellow, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: steel-air, loading space length: 8,150 mm, loading space width: 2,480 mm, Year of construction: 2013, Equipment: ABS, AdBlue, EBS, additional headlights, air conditioning, car registration, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), lane keeping assist, low noise, onboard computer, parking air conditioner, parking heater, power assisted steering, power mirror, retarder, seat heater, soot filter, tachograph, tail-lift, traction control, trailer coupling, truck registration, DAF 105.460, Space Cab with 2 beds, 6x2, last axle liftable, 50 mm low-mounted trailer coupling and 40 mm standard, continuous braking system, Dautel 2 t tail lift, Keppler swing-wall body with 8.16 m loading length, pallet truck box, storage box, stationary air conditioning, front axle leaf-sprung, rear axles air-sprung. Hnsdpfx Aouaxq Dsagel !!!! Clutch and gear selector are new!!!! German vehicle from 1st owner. Sale only to commercial customers and without any warranty. We deliver to any German seaport. Delivery possible for €2.50/km.

Condition: good (used), Bending tool, die, upper blade, upper tool, straightening tool Hedpeb A Rqgjfx Aagonl -Tool: for press brake -Tool radius: 10 mm -Dimensions: 45 x 190 mm -Length: 3000 mm -Weight: 240 kg

Condition: new, Fanuc A06B-0845-B200 #3000 AC spindle motor SN: C994J1130, unused, 100% functional, delivery as per photos. ATTENTION: Please enquire separately for packaging and shipping costs! Hjdpfxox Dt N Ro Aagsnl

Condition: ready for operation (used), Phoenix Contact VL PPC 3000 industrial panel PC 2400184 SN:1709B00355, used, normal signs of wear, 100% fully functional, delivery contents as shown in photos. Hnodsx Dw R Sjpfx Aagjl

Condition: new, Year of construction: 2025, New assembly table with adjustable support bars COMALL JOB 15/3000 Technical specifications: - Contact surfaces in semi-rigid gray PVC - Loading: 180 Kg - Four length wise sliding supporting bars, clamping system through handle - Pneumatic system with two pneumatic connections - Hardware boxes, 6 pcs. - Extensible support, equipped with two longitudinal sliding bars Hnsdpfegiud Rjx Aagel

Condition: used, Year of construction: 1990, table length 3000 mm table width 2500 mm table height 300 mm Hnodoftfcwepfx Aagsl total power requirement 0 kW weight of the machine ca. 5,2 t dimensions of the machine ca. 3 x 2,5 x 0,3 m

Condition: excellent (used), Year of construction: 2007, Manufacturer: GEMINIS Model: GHT5 G2 1000 x 3000 Cnc : SIEMENS 810 D Year : 2007 Distance between points : 3000 mm Max. Swing over bed : 1000 mm Max. Swing over saddle : 680 mm Main shaft hole diameter : 104 mm Hnedpfx Aaowgmz Usgjl Turning speed : 1400 rpm Main motor : 37,5 kw Cross slide travel : 8m/min Tailstock quill diameter : 140 mm Quill traverse : 300 mm Bed width : 550 mm

Condition: used, Dematic conveyor system Roller conveyors 3000/2500/2000/1500/1000-400-440 RA1947 Gravity conveyors - roller conveyors without drive Nominal/outer width (NB): 500 mm Available conveyor lengths (FL): 3000 mm, 2500 mm, 2000 mm, 1500 mm, 1000 mm Further information Manufacturer: Dematic Type: Roller conveyor Year of manufacture: unknown Hsdpfevm Ez Usx Aagjnl Condition: good (used) Roller width (RB): 440 mm Roller pitch: 62,5-125 mm variable Drive types: none or head and center drive Weight of conveyed goods: up to 30 kg Optionally available e.g: Motors with and without frequency inverter from SEW Eurodrive / Movimot Supports Side guides Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics