Used Hitachi Seiki Ht 20 for sale (30,257)

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33802035389, empty load weight: 3,160 kg, maximum load weight: 34,840 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 03/2024, next inspection (TÜV): 03/2027, total length: 7,690 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 90 %, color: grey, The images are archive images! The vehicle may still be in use! Fine-grained steel welded construction, fifth wheel coupling with interchangeable 2" kingpin (Chassis prepared for subsequent retrofitting, drip tray, 4 x hose holders, footboards, Fliegl standard) Container fittings: 1 x 20 ft in the center (or swap body container 7.15 / 7.45 / 7.82), not retractable at the front, the pivot pins of the container locking mechanism in the longer version. 24 tons, 2-speed landing gear, single-sided operation, with semi-circular lower part and straight connection plate, with stroke compensation Chocks with holder Side underrun protection Rear underrun protection with deep step for easier access + footboard inside Semi-elliptical fenders with anti-spray flaps according to EC Axles + Suspension BPW or SAF disc brake axles at the manufacturer's choice, with 430 mm disc diameter, "Axle/chassis laser-aligned" to reduce tire wear and fuel consumption Axle spacing offset 1410/1310 mm (combined transport) up to 44 tons gross vehicle weight Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuated by "3x braking" (starting aid is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Braking system 2-line compressed air braking system Color-coded line routing for easy servicing. Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connection line 24 Volt EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be pulled by towing vehicles which ensure the effectiveness of the ABS! with lifting and lowering valve + auto-reset function Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal, for display on the dashboard in the driver's cab, the truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and tires 385/65 R22.5" manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights in LED, yellow LED lighting on the side, license plate lighting in LED, (Note! with certain towing vehicles, false diagnoses may occur, although the function is given) 2 white position lights at the front in LED 2 white/red side marker lights at the rear in LED 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connection cable additional LED work lights at the rear, switched via reversing light Operating instructions This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas"! Country of registration/Signage Germany with Dekra inspection and certificate (according to §13 EG - FGV) Pjdpfx Adsy Tvuwezora 24/7 service hotline prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the side, yellow at the rear The images are archive images! The vehicle may still be in use!

Condition: used, machine/vehicle number: 2502, DESCRIPTION Parting head, manufacturer Walter Type HT 200 U Center height 200 mm Mounting taper SK 50 Spindle diameter 130 mm Weight 260 kg Prsdpfx Ajc Tuyrsdzsa Space requirement: W 500 x D 650 x H 450 mm DMT0Z2OCZN9

Condition: used, -Used -Wind and waterproof -available immediately -The price is ex-depot Duisburg (also available in other regions on request) -We are happy to take care of delivery and crane unloading (costs on request) Our 20-foot storage container is the perfect solution for your storage needs. It offers you a safe, flexible and cost-effective way to store your goods and materials. Whether for use on construction sites, in industry or for private purposes - this container meets the highest standards of quality and functionality. Product features: - Dimensions: 20 feet (6.06 m) long, 2.44 m wide and 2.59 m high Pjdpfx Asvyabvsdzora - Volume: Approx. 33 m³, ideal for storing large quantities of goods - Material: Robust steel construction that guarantees durability and resistance - Security: Equipped with a reliable locking system and reinforced doors to optimally protect your stored goods - Weatherproof: Weatherproof and corrosion-resistant coating that protects your goods from rain, sun and other environmental influences - Ventilation: Strategically placed ventilation openings prevent the accumulation of moisture and ensure an optimal storage climate Applications: The 20 foot storage container is ideal for storing tools, machines, materials, furniture and much more. It can be used both temporarily and permanently and is ideal for construction sites, warehouses, events or as additional storage space for your company. Additional benefits: - Easy handling: Thanks to the standardized dimensions, the container is easy to transport and place. - Flexibility: The container can be used in different locations and is mobile, so you can move it if necessary. Customization: On request, we offer individual modifications to meet specific requirements, such as shelving systems or additional ventilation. Rely on our new 20-foot storage container for safe and efficient storage of your goods!

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,100 kg, maximum load weight: 34,900 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 7,690 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, Container Fine-grained steel welded construction, saddle plate with 2 replaceable kingpins Container receptacles: 1 x 20 ft in the center (or swap body container 7.15 / 7.45), not retractable at the front, the pivot pins of the container locking mechanism in the longer version 24 tons, two-stage support jacks, single-sided operation With anti-splash flaps according to EC standards Front axle drip tray with 1 1/4 inch drain pipe + 1 1/4 inch shut-off valve, including drip pan, with perforated tread plates, approx. 400 mm wide, left + right between the drip tray and the longitudinal beam 4 hose racks, approx. 4500 mm long (hose box) for hose pipes, 2 x DN 200 on the outside + 2 x DN 160 arranged in the center, at the rear hose box (stainless steel) 300 mm deep, splash-proof, lid (stainless steel) all around with rubber seal, with drain hole at the lowest point, then without lid on the hose pipes 1 stainless steel grounding lug at the rear on the right side of the frame, with international grounding sticker on the frame Climbing steps at the rear right on the underrun protection, at the rear right on the outside of the main beam, tread plate approx. 260 mm long and 300 mm wide Axles + Suspension SAF disc brake axles Axle/suspension laser-measured for reduced tire wear and fuel consumption Offset axle spacing (combined transport) up to 44 tons total train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assistance, activation 3x brake Braking system 2-line compressed air braking system Color-coded line routing for easy maintenance Spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With raising and lowering valve Vehicle - Driving stability system Axle load detection via EBS-CAN bus signal, for display via the display in the driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and tires 385/65 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 1 x 15-pole socket at the front, without connecting cable Operating instructions The specified total weight is technically possible, but depending on the load, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and handling behavior may occur due to incorrect load distribution) This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas"! Country of registration / signs Germany Type approval according to EC 2007/46 24/7 service hotline Prodpfji Rixkox Adzea Prepared for single-row license plate holder Warning sign according to ECE - 70 Acceptance according to ADR, according to 9.1.1.2 of the ADR, EX/II, EX/III / Vehicle registration certificate for the transport of certain dangerous goods (ex.B3) with warning sign on the rear, not valid for substances according to UN 0

Condition: used, Hydraulic plate shear STEINER, Type HTS 30/20 R Machine No. 315 Year of manufacture 1982 Cutting length 3050 mm Cutting thickness 20 mm Back gauge 800 mm, controlled Motor power approx. 30 kW Power connection 400 volts, 50 Hz - Back gauge with positioning control ELGO - Back gauge adjustment via ball screws - Safety light curtain SICK at the front as a guard - 3 units of material support arms with ball rollers - Electric foot switch - Spare blades - Oil cooler with air heat exchanger - Very robust machine with a very stable design Space requirement of the base machine L x W x H 4650 x 2610 x 3200 mm Weight of the base machine 27000 kg Space requirement for transport (base machine) L x W x H 4650 x 2610 x 3200 mm Space requirement for transport (additional) L x W x H 3500 x 2450 x 1400 mm Total weight 27000 kg Good condition Machine can be inspected in warehouse 37235 Hessisch Lichtenau, test cuts possible. The lower clamps are currently being re-sealed, and the corresponding price adjustment will be made in the next few days. Podpfxod Hxx Ao Adzjra

Condition: used, Year of construction: 1992, HTI thermal oil heating system in a 20" container - 1,600 liter capacity - 320 kW - Flow temperature 300 °C Prjdowlim Djpfx Adzsa AB 1000 high-temperature boiler - 1,000 liter capacity - Year of manufacture 1978 Weishaupt burner - Type WL40Z-A The system is operational and in good, used condition. Subject to prior sale and errors. System location: Germany - 02943 Boxberg, OT Nochten, Upper Lusatia

Condition: ready for operation (used), functionality: fully functional, turning length: 230 mm, turning diameter: 190 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 125 mm, travel distance Z-axis: 195 mm, controller model: Fanuc Series O-T, The machine was manufactured in the 1990s. TECHNICAL DETAILS Turning diameter: 190 mm Turning length: 210–230 mm Diameter over bed: 190–200 mm Podpfozul Uyex Adzjra Travel in X-axis: 125 mm Travel in Z-axis: 195 mm Spindle speed range: 6,000 rpm Spindle bore: 43 mm MACHINE DETAILS Control system: Fanuc Series O-T Machine weight: approx. 2,500 kg EQUIPMENT Chip conveyor

Condition: repair required (used), Year of construction: 1998, functionality: limited functionality, turning length: 330 mm, turning diameter: 248 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 190 mm, travel distance Z-axis: 370 mm, The machine’s control system is defective. TECHNICAL DETAILS Turning diameter: 248 mm Turning length: 330 mm Travel distance X-axis: 370 mm Travel distance Z-axis: 190 mm Spindle bore: 45 mm Spindle speed: 6,000 rpm Tailstock quill travel: 120 mm MACHINE DETAILS Transformer: 400 V / 200 V EQUIPMENT Integrated CNC control Machine and control as a closed transport unit Linear guides in the X and Z axes Pedpfxszul Utj Adzera Continuously variable AC main spindle drive Programming for constant cutting speed Integrated cold light Power meter for the main spindle drive Controls for automatic, manual operation and CNC programming Central control panel on the right side of the machine High-dynamic three-phase servo motors for the X and Z axes Backlash-free, pre-tensioned precision lead screws for the X and Z axes Automatic central lubrication with electrical monitoring for bed, cross slide and ball screw drives Coolant system with tank, pump, lines and nozzle Electric 12-station turret system MORI SEIKI with automatic direction logic Direct coolant supply through the turret Fixed hydraulic unit for the power chuck Full enclosure of the working area Front sliding door with large viewing window Electrical connection for chip conveyor prepared Data interface V.24 / RS-232-C Control cabinet Freestanding transformer 400 V / 200 V

Condition: used, Year of construction: 1996, functionality: limited functionality, turning length: 330 mm, turning diameter: 248 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 370 mm, travel distance Z-axis: 190 mm, TECHNICAL DETAILS Turning diameter: 248 mm Turning length: 330 mm Travel range, X-axis: 370 mm Travel range, Z-axis: 190 mm Prodpfx Ajzul Umedzea Spindle bore: 45 mm Spindle speed: 6,000 rpm Tailstock quill travel: 120 mm Note: A switch on the X-axis needs to be reset.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 27,267 h, functionality: fully functional, turning length: 180 mm, turning diameter: 100 mm, spindle bore: 43 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 125 mm, travel distance Z-axis: 195 mm, TECHNICAL DETAILS Turning diameter: 190 mm Turning length: 180 mm Max. turning diameter: 100 mm Travel X-axis: 125 mm Travel Z-axis: 195 mm Rapid traverse X-axis: 15 m/min Rapid traverse Z-axis: 20 m/min Spindle bore: 43 mm Spindle bearing diameter: 80 mm Spindle speed range: 60–6,000 rpm Tailstock diameter: 40 mm Tailstock taper: MK 3 Tailstock travel: 45 mm Number of tool positions: 10 MACHINE DETAILS Transformer: 400 V / 200 V Pedpfxezul T No Adzsra Data interface: V.24 / RS-232-C Operating hours: 27,267 h EQUIPMENT Bar feeder Integrated CNC control Space-saving, compact design Inductively hardened flat guideways for bed and carriage Continuously variable AC main spindle drive Constant cutting speed programming Integrated cold light Ammeter for main spindle drive Swiveling central control panel Controls for automatic, manual, and CNC programming modes Three-phase servo motors for X and Z axes Backlash-free, pre-tensioned precision ball screws for X and Z axes Automatic central lubrication with electrical monitoring Coolant system with tank, pump, lines, and spray nozzle Electric 10-position turret system, MORI SEIKI Automatic turret indexing logic Direct coolant supply through the turret disk Fixed hydraulic unit for power chuck Front sliding door with large viewing window Electrical connection for chip conveyor, prepared Electrical equipment according to VDE 0113 Attached control cabinet Freestanding transformer

Condition: ready for operation (used), Year of construction: 2003, operating hours: 4,256 h, functionality: fully functional, turning length: 570 mm, turning diameter: 176 mm, travel distance X-axis: 245 mm, travel distance Z-axis: 570 mm, controller model: MSG-805 V, TECHNICAL DETAILS Turning diameter: 176 mm Turning length: 570 mm Swinging diameter: 510 mm Machining diameter: 420 mm Travel X-axis: 245 mm Travel Z-axis: 570 mm Rapid traverse X/Z-axis: 24 m/min Spindle bore: 43 mm Spindle speed: 60–6,000 rpm Tailstock diameter: 85 mm Tailstock travel: 120 mm MACHINE DETAILS Control system: MSG-805 V Total power requirement: 5.5 kW Psdpfx Adjzul Tvozera Dimensions & Weight Footprint: approx. 2,000 × 1,700 × 1,800 mm Machine weight: approx. 3,400 kg Operating hours: 4,256 h EQUIPMENT Integrated CNC control system Inductively hardened flat guides for bed and cross slide Continuously variable AC main spindle drive Programming of constant cutting speed Integrated cold light Power meter for main spindle drive Operator controls for automatic and manual operation CNC programming and control panel Tailstock with hydraulically actuated quill, MK 4 Continuously variable quill pressure Programmable actuation of the tailstock quill via toggle switch and M function High-dynamic three-phase servomotors for X and Z axes Backlash-free, pre-tensioned precision ball screws for X and Z axes Automatic central lubrication with electrical monitoring Coolant system with tank, pump, lines, and nozzle Electric 12-station turret system MORI SEIKI Automatic direction logic on the turret Direct coolant supply through the turret disk Fixed hydraulic unit for power chuck Full enclosure of the work area Front sliding door with large viewing window Electrical preparation for chip conveyor Electrical equipment according to VDE 0113 Data interface V.24 / RS-232-C Mounted control cabinet Freestanding transformer: 400 V / 200 V

Condition: excellent (used), Year of construction: 1998, Mori Seiki SH630 Horizontal Machining Centre Year 1998 Spindle speed - 10,000rpm CNC Control - Fanuc drives / Mori Seiki MSC control 4 Axis Table Length 630mm Table Load 1000kg Table Width 630mm Y axis travel - 760mm Z axis travel - 840mm X axis travel - 840mm Tool magazine with capacity for 60 tools 2 Tombstones Pedpfx Ajzp Rftodzjra Comes with Metal standing frame

Condition: used, Year of construction: 2008, turning diameter: 275 mm, spindle bore: 80 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,345 mm, total height: 2,232 mm, total length: 4,339 mm, total width: 2,232 mm, overall weight: 7,600 kg, Equipment: documentation/manual, CNC Lathe with Y-axis, driven tools an 2nd spindle CNC Control MSX-850-lll (mitsubishi 720 BM) Turning diameter 275 / 366 mm Spindle bore diameter 80 mm Spindle speed 4000 R/min Spindle motor 18.5/15 Kw Movement X-axis 260 mm Movement Y-axis +50 / -50 mm Movement Z-axis 1345 mm Movement W-axis (subspindle to mainspindle) 1275 mm Min indexing C-axis main spindle 0,001 ° Number of tools on turret 12x Number of driven tools 12 x Tool Taper BMT Bar feeder LNS Quick Load Servo lll Spindle motor driven tools 6000 R/min Pedjzv Sf Uepfx Adzora If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), power: 10 kW (13.60 HP), fuel type: diesel, color: orange, Year of construction: 2019, operating hours: 1,465 h, Technical information Track width: 18 cm Drive: Track Make of engine: Yanmar Empty weight: 1.110 kg Pjdpfx Aszwlzxsdzsra Functional Dimensions of cargo space: 302 x 78 x 215 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Production country: JP Additional information Please contact Vink Machinery for more information Hitachi Zaxis 10 U-6 * 2019 * 1,465 operating hours * Diesel drive * Clearance width of 78 cm * Manual quick coupler * Additional function on the mast * Hydraulically adjustable undercarriage * Own weight 1,110 kg * 3 digging buckets: 80, 40, and 22 cm

Condition: ready for operation (used), Gero F 100-200/12SO high-temperature furnace, 201101895 - operating range: 30 - 1200°C / cable length (green): 3.9m, connection cable: 3.00m, used, in good condition, 100% functional, scope of delivery as shown in the photos. Psdpfx Ajx Erpnjdzora

Condition: used, Year of construction: 2022, Year of manufacture: 2022 Manufacturer: knikmops BE Podpfx Aezlrgdjdzsra

Condition: used, Year of construction: 1991, turning length: 530 mm, turning diameter: 340 mm, spindle bore: 78 mm, spindle speed (max.): 3,500 rpm, rotational speed (max.): 3,500 rpm, overall weight: 6,000 kg, CNC MF T4, 3-axis machine with C-axis Prjdeznvizopfx Adzoa 12-position motorized tool turret 250mm chuck 78mm spindle bore Maximum spindle speed: 3500 rpm, power: 15 kW Distance between centers: 625mm Maximum turning diameter: 625mm Chip conveyor Weight: 6000 kg

Condition: used, Year of construction: 2003, Manufactured: July 2003 (Factory ID #2) Swing over bed: approx. 680 mm (interference with front cover: approx. 454 mm) Swing over cross slide: approx. 510 mm Distance between centers: approx. 575 mm Max. turning diameter: approx. 390 mm Standard turning diameter: approx. 250 mm Max. turning length: approx. 485 mm Bar capacity: approx. 73 mm Z-axis travel: approx. 520 mm Spindle speed range: 35-3,500 rpm Spindle nose type: JIS A2-8 Through-spindle hole diameter: approx. 86 mm Spindle bearing inner diameter: approx. 130 mm Turret: 10 tool stations (12 optional), shank height for square tools approx. 25 mm, max. boring bar shank diameter approx. 50 mm, indexing time 0.2 sec Hydraulic power chuck: Kitagawa, cylinder type B-210, S/N 1875 Tailstock travel: approx. 515 mm Tailstock spindle diameter: approx. 85 mm, taper MT5 (live center) Tailstock spindle travel: approx. 120 mm Rapid traverse rate: X 18,000 mm/min, Z 24,000 mm/min Jog feedrate: X/Z 0-1,260 mm/min Spindle drive motor (30 min rating): 15/11 kW, high-output option 18.5/15 kW (as fitted per nameplate) Feed motors: X 1.0 kW, Z 3.0 kW Electrical power supply: 34 kVA (high-output specification, per nameplate; standard rating 27.4 kVA) Coolant tank capacity: approx. 205 l (front-removal option: approx. 160 l) Machine height: approx. 1,890 mm Floor space: approx. 2,380 x 1,835 mm Machine weight: approx. 4,500 kg Psdpfx Adezwf Daozsra Electrical rating (per nameplate): 3-phase, 50 Hz, 200V AC, full load current 99A, spindle motor current rating 114A, interrupting capacity 5 kA Data Accessory Tool Cabinet (Hahn & Kolb) Multi-drawer mobile tool cabinet with turning tool holders, inserts, clamping/chuck jaws and measuring instruments.

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 3,000 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 820 mm, overall weight: 6,000 kg, number of slots in tool magazine: 12, number of axes: 3, Horizontal turning machine manufactured in 2008. This MORI SEIKI NL 3000 MC/700 features a maximum turning diameter of 430 mm and a turning length of 713 mm. It includes a 12-station turret for efficient tool changes and operates at a spindle speed of 3000 rpm. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI NL 3000 MC/700 machine we have for sale. Contact us for further details. - Chuck: 12" (3-jaw chuck)- Max Turning Diameter: 430 mm- Swing Over Bed: 978 mm- Turning Length: 713 mm- Phase: 3 Phase- Frequency: 50 Hz- Voltage: AC 200 V- Full Load Current: 133 A- Current Rating of Spindle Motor: 300 A- Short Circuit Current: 1 kA (220 V Maximum)- Rated Power: 46 kVA- Machine Dimensions: 3,400 mm x 2,089 mm x 2,270 mm- Optional Accessories/Equipment: Tooling, chip conveyor, accessories/manuals available Podpfszwxzxjx Adzora Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 600 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, table width: 600 mm, table length: 900 mm, table load: 500 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis MORI SEIKI DURA VERTICAL 5060 was manufactured in 2007. It features a travel distance of 600 mm in the X-axis, 530 mm in the Y-axis, and 510 mm in the Z-axis. The machine includes a table size of 900 x 600 mm and a maximum table load of 500 kg. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI DURA VERTICAL 5060 vertical machining centre we have for sale. Contact us for further details. • Travel X: 600 mm Predpfszwvkkox Adzsa • Travel Y: 530 mm • Travel Z: 510 mm • Table Length: 900 mm • Table Width: 600 mm • Table Load: 500 kg • Spindle Speed: 10,000 rpm • Spindle Taper Options: SK40 / BT40 • Tool Positions: 30 Technical Specification Taper Size SK 40

Condition: good (used), Technical data for the pallet racking upright: Racking system: META (Thyssen) Type: Multipal S Included in the scope of delivery: 01x Pallet racking upright, used Material color: Sendzimir galvanized Upright type: SR 85|20 Profile dimensions: 85 x 75 x 2.0 mm Includes cross and diagonal braces and base plates The uprights are pre-assembled (bolted framework) Height: 2,000 mm Depth: 1,100 mm Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Predpozva Dfsfx Adzoa Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any further desired transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: excellent (used), power: 133 kW (180.83 HP), fuel type: diesel, color: other, number of seats: 1, first registration: 08/2016, Year of construction: 2016, operating hours: 6,868 h, Equipment: air conditioning, = Additional options and accessories = - PTO = Remarks = Condition CE type: CE = More information = General information Cab: day Predpfxjzwnnhs Adzja Technical information Number of cylinders: 4 Engine capacity: 5.193 cc Track width: 259 cm Empty weight: 26.400 kg Dimensions (LxBxH): 1036 x 319 x 307 cm Functional Maximum reach: 1.001 cm Quick coupler system: Yes CE mark: yes Condition Technical condition: very good Visual appearance: very good

Condition: new, Tyrolit REI 103467 TN 34200609 dressing roller for Schaudt Mikrosa, unused in opened original packaging, 100% functional, scope of delivery as per photos Pjdpfezu Hnujx Adzsra

Condition: excellent (used), Year of construction: 2010, FANUC MSX-711 Mapps 4 control with B + C axis Working travels 500 x 350 x 510 mm Table swivelling -180°/+160° Table rotating 360° Spindle taper HSK63 Spindle speeds -20'000 rpm tool changer 61 pos. Coolant through spindle 3D tracer M&H Tool lenght measuring device Tool breakage control device Prodpfx Adozwt N Dszoa MARCELS MASCHINEN CH

Condition: used, Year of construction: 2005, turning length: 705 mm, turning diameter: 356 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 795 mm, controller model: MORI SEIKI MSX-850, TECHNICAL DETAILS Turning diameter: max. 356 mm Standard turning diameter: 275 mm Turning length: max. 705 mm Prsdszwgwzjpfx Adzea Travel in X-axis: 260 mm Travel in Y-axis: ±50 mm Total travel in Y-axis: approx. 100 mm Travel in Z-axis: approx. 795 mm Rapid traverse rate X/Y/Z: 30 m/min Tool stations: 12 MACHINE DETAILS Design: SY with Y-axis Control system: MORI SEIKI MSX-850 Bar feed magazine: LNS Quick Load Servo 2 Bar length: max. approx. 1,500–1,600 mm / 63″ EQUIPMENT Tailstock Driven tools Y-axis LNS Quick Load Servo 2 bar feed magazine