Used Gea Courtoy R090 for sale (2,119)

Year of construction: 1971, condition: used, Technical details: max. wheel diameter: 300 mm max. module: 5 Hedpfx Adevc Apbjweu module min. : 0,5 max. workpiece weight: 60 kg weight of the machine ca.: 4,0 t dimensions of machine: 1800x1850x2500 mm dimensions electric cabinet: Nr. 1: 1930x400x1920 mm dimensions electric cabinet: Nr. 2: 800x230x1950 mm dimensions:: Abluftanlage: 1400x700x560 mm dimension cooling device LxWxH: 1,2 x 1,0 x 0,45 m Electronically controlled tooth flank grinding machine up to module 5 and a Ø of 240 - 300 mm feed speed per workpiece revolution infinitely variable 0.4 - 3.2 mm max./min. Number of teeth: 130 / 12 max./min. Pressure angle: 30° / 14°30` max./min. Spiral pitch with 24 teeth: 6000 / 200 mm max. tooth helix angle, both sides: 45° Speed of the grinding worm: 1900 rpm without dressing device Equipment: approx. 77x change transmission wheels, pipe extensions and various tools Two of these machines are for sale. Both machines are supplied via two common control cabinets and an exhaust air system. *

Condition: used, bore capacity in steel (diameter) . mm Hjdpfx Adez E Svcewou throat 368 mm bore stroke . mm feed 0,1-6,18 m/min table surface area 560x470 mm Thread-cutting device The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, CNC Spiral Bevel Gear Cutting Machine Hsdpfxew Tfb Se Adwsu Gleason No 631 Year of manufacture: 2011 Control: SIEMENS 840d Retrofitted in 2011/2012 with new control, drives, etc. The machine was fully overhauled in 2011. A new control system and drives were installed.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 27878-01, type of input current: three-phase, input voltage: 11,000 V, input frequency: 50 Hz, input current: 2,900 A, ABB Limited low-voltage main switchgear / main distribution switchboard. Serial number: 27878-01 Year of manufacture: 2004 (nameplate: 27878-01/2004) Type: Low-Voltage Main Switchgear / Main Distribution Switchboard Nameplate data: Supply: 415 V AC, 3-phase, 4-wire, 50 Hz Auxiliary circuit voltage: 240 V AC Main busbar rating: 2900 A Main busbar fault level: 50 kA for 1 second (nameplate). The site equipment card also states 55 kA for 1 second. Degree of protection: IP31 Conformity: BS EN 60439-1, BS EN 60947-1, 73/23/EEC, CE Main breakers: ABB SACE E2 air circuit breakers (ACB) Interconnection ACB to Section C busbars Withdrawable PDU outgoing modules Metering / instrumentation cubicles with digital meters Associated with Transformer 1C / PDU distribution. Some compartments are marked Danger 11 000 V (HV / transformer cable side). Manufacturer: ABB Limited, Hanover Place, Sunderland, England, SR4 6BY. Hsdpfx Aozz I T Ejdweu Condition: used, installed in a plant room. Price on request. Nameplate and cubicle photos available.

Condition: refurbished (used), Year of construction: 2027, functionality: fully functional, gear diameter: 250 mm, spindle speed (max.): 71 rpm, spindle speed (min.): 35 rpm, total height: 1,800 mm, total length: 2,200 mm, total width: 1,800 mm, controller manufacturer: Siemens Sinumerik ONE, drive type: Sinamics S120, control type: CNC control, Equipment: rotational speed infinitely variable, Economical production of straight-toothed bevel gears – both in single units and in series: The SW KF 250 is based on the proven cast iron bed of the Chemnitzer Modul ZFTK 250 and is completely rebuilt by Serwema Retrofit Solutions, with Siemens Sinumerik ONE, digital Sinamics S120 drives, and an electronic worm gear between the workpiece and weighing drive. The machine mills using the convoid process, a universal and highly economical process for straight-toothed bevel gears, as well as producing herringbone gears and spur couplings. Application areas: agricultural machinery, gearbox construction, drive technology, railways and mining – anywhere where straight-toothed bevel gears up to 250 mm are required and new machines are hardly offered. Delivery time is five to six months from order, with acceptance testing in Chemnitz together with you. The SerWeMa gear cutting software guides the operator through workpiece and tool data using masks, without the need for programming. Integrated technology cycles: plunging, rolling, plunging and rolling, and plunging with double rollers. Engagement angles from 14 to 28° can be freely selected, and the number of teeth can range from 6 to 100. The stiff, ribbed cast iron bed provides the static and dynamic rigidity for bevel gears up to module 7 with a tooth width of 40 mm; the hydraulic and coolant unit is integrated into the bed, with components from Rexroth, Parker and Hydac, and pulse lubrication from Bielomatik. All worm gears are newly manufactured in bronze. Hsdpfx Adjz E H Dbjwju Technical data: max. bevel gear diameter 250 mm, max. module 7, number of teeth 6–100, max. tooth width 40 mm, engagement angle 14–28°, distance between workpiece spindle and bevel tip 40–280 mm, workpiece spindle mount 80 mm metric, cutter head diameter 355 mm with 22 cutters per side, cutter head speed 35–71 rpm, connection value 30 kVA. Installation dimensions approx. 2.5 × 2.1 × 1.9 m, weight approx. 6 t. Scope of supply: complete electrical equipment with Siemens Sinumerik ONE and Sinamics S120, climate-controlled control cabinet manufactured in-house, dialog software, all worm gears in bronze, magnetic chip conveyor, circulation and pulse lubrication, hydraulic unit, coolant system, new paint RAL 5015/7035, geometric acceptance test according to SerWeMa protocol based on DIN standards, documentation (operating manual, electrical diagrams with parts lists, hydraulic and lubrication diagram), CE marking. Optional: installation, commissioning and operator training at your site.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, rotary table diameter: 450 mm, position of the milling head: Schwenkbar (45°), table diameter: 450 mm, total length: 5,600 mm, gear diameter: 500 mm, total height: 3,100 mm, total width: 3,600 mm, input frequency: 50 Hz, type of input current: three-phase, spindle speed (max.): 340 rpm, table bore: 125 mm, spindle speed (min.): 80 rpm, travel distance X-axis: 325 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, overall weight: 14,800 kg, distance table to spindle center: 350 mm, tool diameter: 200 mm, controller manufacturer: Siemens Sinumerik 840D sl, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, A Pfauter PE 500 for the economical production of straight and helical spur gears up to module 12 and 500 mm in diameter – completely overhauled by SerWeMa with Siemens Sinumerik 840D sl, equipped with a gripper unit and a 32-position workpiece storage for unmanned operation. The machine is ready for operation in our hall in Chemnitz: you can inspect it under power, and if desired, we will mill your own sample part and you can take delivery of the machine here. No delivery time, no risk. Sold by Serwema Retrofit Solutions, the company that carried out the overhaul and knows the machine inside out. Hsdpsz Et E Esfx Adwju The general overhaul included complete geometric overhaul by grinding and scraping, new roller bearings in the main drive and in the milling head, measuring and reconditioning the worm gear, overhauled or new ball screw drives, overhaul of hydraulics, lubrication and coolant system, and new electrical equipment with Sinumerik 840D sl, Sinamics S120 and new axis motors. An electronic generating gear controls all generating and single-part machining processes, and an NC-controlled crash recovery protects the tool and workpiece in the event of a power or phase failure. New paint in RAL 7035/5015 with oil and coolant resistant two-component paint, acceptance of geometry according to SerWeMa protocol based on DIN ISO 6545. The machine controls six CNC axes: X radial, Y tangential, Z axial, A milling head swivel, B milling cutter drive and C table drive. The SerWeMa gear cutting software guides you through workpiece and tool data via masks, without the need for programming: up to three position-oriented gearings per workpiece, each with its own tool, up to three cuts per gearing with simultaneous or counter-rotating movement, form corrections for convex, conical and convex-conical profiles, lead-in and lead-out phase correction, chamfer milling, dimension correction via tooth width, two-roll or two-ball gauge, measuring stop, shift strategy with defect management per generating cutter and cutting force monitoring with automatic retraction. Technologies: generating milling, single-part milling and worm gear milling both radially and tangentially. A hand-held device with a handwheel allows setup directly in the working area. Technical data: max. workpiece Ø 500 mm, max. module 12, max. milling cutter Ø 200 mm, max. milling cutter length 240 mm, shift travel 200 mm, milling cutter speed 100–450 rpm, swivel angle +25°/−45°, travel radial 325 mm (axis distance 25–350 mm), travel axial 400 mm (310–710 mm), table diameter 450 mm, table bore 125 mm, connection power approx. 60 kVA. Installation dimensions incl. automation approx. 7.2 × 4.5 × 3.3 m, weight approx. 16.8 t. Equipment: machine enclosure, chip conveyor, gripper unit with two grippers, workpiece storage with 32 positions, preparation for emission extraction (150 mm nozzle, Harting connector on the machine roof). Documentation complete in German: operating manual, electrical diagrams with parts lists, hydraulic and lubrication diagrams. Serwema optionally offers: trial part milling in our factory, additional milling arbors, assembly and commissioning at your location, operator training and a control system upgrade to Sinumerik ONE. Spare parts and service come from a single source, worldwide, even after the purchase.

Condition: used, offer consists of: Hodpfx Aou Sr A Tsdweu SPF-20 - gear / equipment for smaller sizes used We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: good (used), Counting scale, scale, digital scale, market scale, shop scale, price calculating scale -Manufacturer: EXA, Market scale, Retail scale -Type: E 10 -Weighing range: max. 10 kg -Display: Price / kg / Tare, double-sided display -Dimensions: 320/310/H120 mm -Weight: 3 kg Hodpew S T D Eofx Adweu

Condition: good (used), Year of construction: 1972, max. wheel diameter 80 mm gear width 60 mm max. module 3 min. module 0,1 total power requirement 0,4 kW Hedpjw N S D Ssfx Adwsu weight of the machine ca. 120 kg dimensions of the machine ca. 0,6x0,6x0,75 m

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Detailed description For sale: complete aisle Automated Storage and Retrieval System (AS/RS) (Knapp) Ideal lot for integrators and logistics companies wishing to enhance their automated storage capacity. Sold as is, complete lot ready for installation. Less than 100 hours of service! Lot contents: • 10 OSR units (Knapp shuttles) – shuttles for automatic storage and handling • 2 lifts (for connecting levels) • Infeed and outfeed conveyors included (for easy integration into the existing flow) • 2,200 SILVERLINE plastic containers, European standard (or equivalent) + dividers included • Ladders, rails, and crossbars for racking (structural elements for storage) • Protective mesh (production) • No picking stations included Condition: equipment very little used. Inspected and functional. Sold as is. Numerous spare parts available! Delivery and installation possible, please contact us! Hjdextfa Hepfx Adwju No control system service or installation (software) provided. Advantages: • High automated storage capacity (2,200 containers) • Modular Knapp OSR solution, compatible with modern automated environments • Conveyors included to facilitate flow integration Price: €340,000.00 excluding VAT (complete lot). ⚠️ Important: ISC Recycle only handles the sale of the equipment. Integration available upon request.

Condition: new, power: 294 kW (399.73 HP), axle configuration: 4x2, color: white, driver cabin: day cab, gearing type: automatic, loading space length: 73,000 mm, Equipment: ABS, air conditioning, For vehicle inquiries, please contact Mr. Seidel (Tel. No. ...). S-Way AD190S40/P 4x2 box body with tail lift. EURO VI E emission standard, speed limiter set to 90 km/h, cab rear wall without window, plastic bumper, cab fittings in black, AD MY LOW ROOF CAB, standard cab roof insulation, flat white roof, electronic immobilizer and second vehicle key, rear wall storage compartment with two sections, dashboard design: plastic with black inlays, 10-inch instrument cluster, digital tachograph 4.1, air suspension on rear axle, generator 2160W (24V x 90A), recommended for tail lift operation, rear shock absorbers, vertical dry air filter, moderate climate execution, standard specification, air compressor 1-cylinder 352cc, chassis frame in grey, standard complete tractor-trailer brake, steel air tanks (number depends on suspension and trailer version), front axle stabilizer, exhaust pipe to the left, batteries 180 Ah (Heavy) / 170 Ah (Eurocargo, recommended for tail lift and/or PTO use), standard chassis component positioning, standard ride height, rear frame overhang: 2208mm, fuel tank 290L aluminum, AdBlue tank 50L, ECO NORMAL MODE, standard gearbox mode, 4G Connectivity Box incl. TCO service contract, RADIO with Bluetooth, DAB+, 7-inch display, tire pressure monitoring system (TPMS) with internal sensors, 4 DIN slots storage above, gearbox software ECO-Roll (coasting function), standard engine configuration Cursor 9, adaptive cruise control (ACC), lane departure warning system (LDWS), driver drowsiness attention warning, hill start assist (Hill Holder) for improved start-up on inclines, electronic stability program (ESP), reverse monitoring system with camera, blind spot monitoring system (BSIS) on the right, intelligent speed assistant (ISA), NO HIGH WAY ASSIST, moving off information system (MOIS), advanced emergency braking system (AEBS), pneumatic parking brake, wiring for breathalyzer immobilizer (ALC), CAMBIO 12TX 1850 TD, tires: 315/70R22.5, mechanical roof hatch, first aid kit, fog lights with cornering/turning function, air suspension for driver cab, exterior mirrors electrically adjustable and heated, LED headlights at the front, black decorative foil on doors, transparent sun visor mounted externally above cab, leather steering wheel, sun blind for driver's side window, pneumatic horn behind bumper, fully automatic air conditioning, HI-Comfort driver's seat: multi-adjustable, air-suspended, integrated headrest and height-adjustable seatbelt, lumbar support, 3-step heating/cooling, luxury co-driver seat: 4-way adjustable, air-suspended, integrated headrest and seatbelt, heated, lumbar support, reinforced parabolic spring on front axle, electrical pre-installation for tail lift according to VEHH standard, front axle weight variant: 8,000 kg / rear axle: 11,500 kg (technically possible: 13,000 kg), heavy-duty anti-roll bar rear axle D 60mm, two wheel chocks, cab-mounted battery master switch, battery charging socket, terminal clamps, rear axle ratio: i = 3.08, 24V trailer socket, 15-pin, ... Hedpfxeyfvyis Adwju

Condition: ready for operation (used), Year of construction: 1959, functionality: fully functional, machine/vehicle number: 80, total height: 1,900 mm, overall weight: 2,500 kg, total width: 2,200 mm, total length: 1,500 mm, power: 5 kW (6.80 HP), TECHNICAL DETAILS Power: 5 kW MACHINE DETAILS Hedpfx Aszrmvtjdwsu Drive system: Conventional Dimensions & Weight Dimensions (L x W x H): 1,500 x 2,200 x 1,900 mm Unladen weight: 2,500 kg Number of transport packages: 3 EQUIPMENT Documentation New Dathan knife sets Tools Measuring accessories

Condition: ready for operation (used), Year of construction: 2005, laser power: 2,500 W, travel distance X-axis: 8,750 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 375 mm, number of axes: 7, This 7-axis Mazak 3D Fabri Gear 150 was manufactured in 2005. It features an impressive X-axis travel of 8750 mm, Y-axis travel of 1270 mm, and Z-axis travel of 375 mm. The machine is equipped with a powerful 2.5 kW resonator, providing efficient cutting capabilities. If you are looking to get high-quality tube cutting capabilities, consider the Mazak 3D Fabri Gear 150 machine we have for sale. Contact us for further details. Hjdpfx Adozhvn Dowou • Axis travels: • X: 8750 mm • U: 9100 mm • V: 2315 mm • Y: 1270 mm • Z: 375 mm • Rotary axes: • A: ±345° • B: ±135°

Year of construction: 2021, condition: good (used), functionality: fully functional, machine/vehicle number: C28046-0000, Sheet Metal Tab Placement and Bonding Machine In the sheet metal tab placement machine, metal tabs are automatically positioned onto the XPS/EPS core (sandwich panels) based on a laying pattern. The metal tabs are fixed in place using adhesive dots and flush-mounted. For functional details, see the product video. Hedpsyw Ht Eofx Adwsu Current XPS/EPS panel sizes suitable for metal tab placement: min. 1,500 x 1,500 mm max. 8,000 x 2,500 mm

Condition: good (used), Geared motor, electric motor, electric geared motor, spur geared motor Hjdoy Tka Ispfx Adwju Manufacturer: Nord, geared motor -Gearbox: Type SK12-71 L/4 i= 31.19 -Speed: 45 rpm -Engine: Nord type SK 71 L/4 -Power: 0.37 kW -Protection class: IP54 -Shaft: Ø 25 x 50 mm -Dimensions: 455/190/H170 mm -Weight: 16.4 kg

Condition: used, mileage: 306,694 km, power: 357 kW (485.38 HP), first registration: 03/2023, fuel type: diesel, overall weight: 18,000 kg, tire size: 315/70 R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, color: white, driver cabin: other, gearing type: automatic, suspension: steel-air, number of seats: 2, Equipment: air conditioning, cruise control, navigation system, parking heater, CERTIFIED PRE-OWNED Standard, color: White IC 194, permissible gross weight: 18,000 kg, 1st axle: 315/70 R22.5, fabric seats, leaf/air suspension, retarder, fifth wheel coupling: H 190 mm, electronic stability program (ESP), automatic climate control, parking air conditioning, radio navigation system, adaptive cruise control, air-suspended driver and passenger seat, armrests for driver and passenger, heated driver's seat, LED headlights, cornering lights, digital radio (DAB), USB port, Bluetooth hands-free kit, lane departure warning system, multifunction leather steering wheel, electric windows, electric glass roof, roof spoiler, electrically adjustable and heated exterior mirrors, tire pressure monitoring, immobilizer, central locking with remote control, sun visor, cool box and refrigerator, hill start assist, 1x 15-pin connector, sailing mode: Eco-Roll, cornering light, speed limiter: 90 km/h, ventilated driver's seat, emergency brake assist, upper and lower bed, suspended cab, ECOSWITCH, Eco Smart Generator, OBU preparation, Driving Style Evaluation, signal horn behind bumper (compressed air), sun roller blind for side window. Last maintenance was on 25.03.2026 at 306,496 km. Roadworthiness and emissions test (HU/AU) will be renewed before delivery, including tachograph inspection and OBU installation. Optional at extra cost: 1 year used vehicle warranty from mobile with deductible. For questions, Jan Furtak is at your disposal. Tel. ., subject to errors and changes. Sale only to commercial customers. Hsdpfx Ajy Iht Ijdwou

Condition: used, Year of construction: 2008, control Siemens 840D Hobbing Machines for Large Gears Flexible and Versatile Gear Hobbing Gleason’s large hobbing machines offer maximum productivity for roughing and finishing operations on cylindrical gears for many industries: wind turbines, industrial gearboxes, mining, and shipbuilding, gear machining, and many more. The guideways are wide and feature hydraulically preloaded guides, which are used in combination with a separate linear guide and backlash- free rollers. This ensures precise slide movements with every feed. The design of the worktable ensures optimal conditions for absorbing and transferring cutting forces to the machine base. The use hydrostatic table bearings, combined with the proven backlash-free double-worm gear, guarantees precise table movements and the highest flatness and concentricity accuracies of the worktable. This holds true regardless of significant fluctuations in workpiece weight and/or high machining forces. The motorized gear hobbing heads for external and internal gear cutting are designed to meet the requirements of modern cutting tools. All machine sizes can be equipped with both external and internal gear hobbing heads. Hjdpewzypnsfx Adwsu The power range of the drive takes future tool developments into account. Naturally, the gear hobbing head drive is also backlash-free. These machines are particularly well-suited for use with state-of-the-art cutting materials. >> dry only, 1 chip conveyor, table diameter 1,870 mm

Condition: used, functionality: fully functional, machine/vehicle number: FN 51xxxx, Year of construction: 2016, operating hours: 3,776 h, load capacity: 1,500 kg, lifting height: 4,500 mm, free lift: 1,455 mm, fuel type: electric, mast type: triplex, construction height: 2,090 mm, fork length: 1,150 mm, empty load weight: 3,203 kg, total length: 1,785 mm, drive type: Elektro, construction width: 1,070 mm, Electric 3-wheel forklift Chassis number: FN 51xxxx Hedpfezxi Irex Adwsu Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: AC impulse Condition: Refurbished, without warranty Technical condition: very good Front tire type: Superelastic Front tire size: SE 18x7-8 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: SE 18x7-8 Rear tire condition: 80 - 100% Battery voltage: 24V Battery capacity: 1000Ah Battery manufacturer: IBV Battery type: PzS Battery year of manufacture: 2026 Description: professionally refurbished by the manufacturer, inspected and approved according to UVV regulations, a new battery will be ordered and installed before delivery, without any warranty/liability for defects Side shifter, attached with quick couplings 3rd valve, roof cover, impulse control, full free lift, flashing light, Solo-Pilot (single lever), interior mirror, battery (will be newly ordered and installed before delivery) with Aquamatik, external charger included

Condition: good (used), DC motor, servo motor, geared motor, electric motor, DC geared motor, DC shunt-wound geared motor -Manufacturer: Stöber, DC geared motor type C002NF-0047-PF112 -Speed: 0-641 rpm -Engine: Type PF112 -Voltage: 160 V Hedpfx Aozn Nmasdwju -Power: 0.6 kW -Shaft: Ø 20 x 40 mm -Dimensions: 395/160/H195 mm -Weight: 19.5 kg

Condition: used, manufacture LTi DRIVES Type BR-090.03.540-UR 750Vdc 3 Hedpfx Adezu A Svowju We offer: 80 braking resistors Manufacturer: LTi DRIVES Type: BR-090.03.540-UR 750Vdc 300W Condition: Good used condition. Fully functional prior to removal. Accessories, tools, and clamping devices shown in the images are included in the scope of delivery only if specified in the additional information. Subject to change and errors in technical data and specifications; subject to prior sale.

Condition: used, Year of construction: 1979, max. wheel diameter 420 mm gear width 120 mm max. module 7 mm min. module 0,5 gear hobbing diameter - external 420 mm gear hobbing diameter - internal 370 mm table diameter 400 mm boring diameter 125 mm spindle stroke 120 mm stroke position adjustment 230 mm strokes - infinitely variable 30 / 800 Hub/min depth feed stepless 0,016 - 0,063 mm/Hub total power requirement 35 kW weight of the machine ca. 7,5 t Hsdpfxezv Ulqj Adweu dimensions of the machine ca. 2,46 x 3,48 x 2,66 m Accessories: - Various replacement wheels and blade holders - Documentation

Condition: good (used), functionality: fully functional, Tos OFP-32, Serial No. 0427441 Condition: 8/10 Max. module: 7 / 9 Max. diameter: 320 mm Hodpfozxqdzjx Adwsu Max. length: 200 mm Vertical gear hobbing machine

Condition: excellent (used), functionality: fully functional, Machine no. MP 253/18 in good condition, can be inspected while running Max. Gear Diameter: 267 mm (11 inches) Max. Stroke / Face Width: 100 mm (4 inches) Max. Internal Pitch Circle Diameter (PCD): 152 mm Max. Module Capacity: Module 6 Table Diameter: 254 mm (10 inches) Table Bore: 76 mm (3 inches) Hsdpfxjzxxnhe Adweu

Condition: used, Year of construction: 2008, Maximum workpiece outer diameter 3420 mm workpiece diameter nominal 2400 mm max. module 30 mm control Siemens Sinumerik 840 D Minimal workpiece - internal diameter 630 mm Maximum workpiece outer diameter 3420 mm Maximum workpiece tooth width 600 mm max. rim strength 500 mm Maximum permissible head circle diameter 440 mm Hob/disc cutters – Maximum length 90 mm Milling arbour diameter 80 mm milling head -swivable +15/-15 Grad workpiece table outer diameter 1870 mm Workpiece table bore 600 mm Workpiece table – Maximum permissible load 300 kN rapid traverse X-axis 3000 mm/min rapid travel z-axis 4000 mm/min Workpiece table speed 0-6 U/min Tools speed 18-180 U/min weight of the machine ca. 38 t dimensions of the machine ca. 8,41 x 9,05 x 5,19 m total connected load 100 kVA Equipment/accessories: - IFK2 internal milling head - Milling arbor with spacer discs - Chip conveyor - Oil mist extraction Hodpfx Aeztz Ruedweu - Dry machining only - Technical documentation

Condition: good (used), Year of construction: 1980, functionality: fully functional, Gear-driven drill press, no belt changes required Very quiet and smooth operation Hjdpszuxxfefx Adweu - Drilling capacity in steel ST 60: 30 mm - Drill spindle mount: MK 3 - Drill spindle stroke: 160 mm - 9 drill spindle speeds: 90 - 1450 rpm - Overhang: 300 mm - Table with 2 T-slots - Table dimensions, swiveling: 500 x 450 mm - Table dimensions, base plate: 350 x 400 mm - Distance from base plate to spindle nose: 1100 mm - Max. distance table - drill spindle: 660 mm - Height adjustable via rack and pinion with hand crank - Column diameter: 120 mm - Drive: 380 V / 1.2 kW - Space requirement: approx. W 600 x H 2100 x D 670 mm - Weight: approx. 350 kg - Includes drill chuck