Used Fully Overhauled Hot Radial Forging for sale (18,504)

Condition: used, Universal Tool Milling Machine MAHO Type MH 800 P with digital readout and HEIDENHAIN TNC 121 contouring control . 80983 Year of manufacture: 1982 Machine overhauled by MMD in 2008, subsequently used only occasionally in the workshop of an electronics company. Travel X: 700 mm, Y: 450 mm, Z: 500 mm Table size: 1050 x 627 mm Spindle taper: ISO 40 Spindle speed: 40–2000 rpm, 18 steps Feed X, Z-axis: 10–500 mm/min, stepless Feed Y-axis: 5–250 mm/min, stepless Rapid traverse X, Z-axis: 1.4 m/min Rapid traverse Y-axis: 0.7 m/min Quill vertical travel: 100 mm Quill feed, vertical: 0.02 / 0.03 / 0.05 / 0.08 / 0.12 / 0.2 mm/rev Quill horizontal travel: 100 mm Spindle drive: 5.5 kW Power supply: 380 Volt, 50 Hz, 10 kW - NC contouring control HEIDENHAIN TNC 121 - Vertical milling head with automatic quill feed 0.02–0.2 mm/rev (6 steps) - Hydro-mechanical tool clamping - Coolant system integrated in the machine base - Universal rotary table, 360° rotatable, tilts and swivels 30°, 225 mm cross adjustment - Rotary table with direct indexing 72 x 5° and indirect indexing via index plate 1:120 = 1 rev = 3° Dsdev Amryepfx Afkouu - Swiveling control panel - Central lubrication - Operating manual - Machine mounted on steel plate L x W x H 1400 x 1000 x 50 mm = 550 kg Space requirements L x W x H 2650 x 2000 x 2450 mm Weight: 3700 kg + 550 kg steel plate Total weight: 4250 kg (actual) Very good condition

Condition: good (used), Year: 2005 Equipment: Max. size 320 x 420 mm Min. size 75 x 150 mm Speed: Max. 10,800 cycles/hour Number of stitches: Standard 11 Power requirements: 6 kW (220/380V, 50Hz) Air requirement (6 bar): 200 m³/h Width: 2730 mm Depth: 1800 mm Weight: 3000 kg (approx.) Equipment: Fully automatic book sewing machine • Automatic feeder • 4 upper and 4 lower signature openers • Computer program • Thread cutting device Djdpovp Rw Tsfx Afksuu Condition: Very clean, in excellent working condition. Machine was refurbished in 2024.

Condition: used, Year of construction: 2007, bore capacity in steel (diameter) 40 mm arm length 1050 mm turning speeds 15 - 2800 U/min feed range 0,075 - 0,45 mm/min dimensions 2450 x 1300 x 2300 mm Weight 1500 kg Equipment: Machine in top condition 2026 serviced and repaired by the factory customer service Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60 ? 40 GG 22 ? 50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % ED. Djdsy Nd T Hspfx Afkouu Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7,5 / 7,5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 3 (X, Y, Z, ) Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides readable from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X,Y,Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphic Graphic display of drilling patterns

Condition: good (used), Year of construction: 1998, functionality: fully functional, DONAU DANUMERIC 440, year of manufacture 1998 Technical specifications: - Table 1800 x 600 mm, 4 T-slots - Drilling radius 540 – 1590 mm - Spindle taper SK40 Dedpjy Txlrjfx Afkouu - Speed range 15 – 2800 rpm - Motor power 5.5 kW - Weight approx. 2,800 kg

Condition: new, Main Motor Power: 5.5 KW, 380 V Operating Type: Hydraulic Operating Type: Geared Coolant Pump Power: 90 W Duedpfx Ajy T H S Hjfkeu Drilling Capacity: 63 mm Spindle Taper: MK5 Spindle Stroke (Spindle Travel): 400 mm Spindle-Column Distance: 450-2050 mm Spindle-Table Distance: 400-1600 mm Column Diameter: 450 mm Speed: 20-1600 rpm Number of Steps: 16 Table Size: 950x630x500 mm Spindle Feed: 0.04-3.2 mm/rev (16 steps) Machine Size: 2900x1250x2500 mm Dimensions (L x W x H): 3110x1250x3150 mm Net Weight: 6800 kg Gross Weight: 7150 kg

Condition: new, Year of construction: 2026, machine/vehicle number: 2026, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, total length: 860 mm, total width: 800 mm, total height: 500 mm, Equipment: CE marking, documentation/manual, NEW +++ NEW Ladenbackofen Unox Bakerlux 4 NEW +++ NEW Convection oven for 4 trays, 600 x 400 mm Stainless steel construction with front glass door Manual door flap, programmable control Temperature adjustable from 50 - 260°C Connection: 400V, 16A CEE plug Dimensions: 800 x 811/860 x 500 mm (W x D x H) Oven NEW with warranty & spare parts service Quality from a specialist dealer! Benefit from over 35 years of experience! Options: Baking trays 600 x 400 mm Perforated aluminum trays 600 x 400 mm Water filter Maintenance contract Delivery service Spare parts box Duodpfx Aoxci U Tjfkou Service package Instruction & commissioning Visit our large oven showroom!

Condition: good (used), Code: 0279 Brand: ALBERTI V. Model: PCC 33/18 Continuous cycle hot press for veneering, furniture, doors, panels, composite materials and various Max working length 3300 mm Max working width 1800 mm Opening 200 mm Dodex I Nz Hjpfx Afkeuu N° 6 pistons diameter 100 mm Solid platens Diathermic oil heating Loading conveyor

Condition: excellent (used), Year of construction: 2009, operating hours: 3,350 h, functionality: fully functional, total length: 21,000 mm, total width: 1,200 mm, total height: 3,250 mm, type of input current: three-phase, input voltage: 380 V, feed rate X-axis: 12 m/min, working width: 270 mm, We are selling our fully automated packaging line by CSP Engineering due to production expansion and renewal of our machinery park. The packaging line is engineered for maximum output, precision and reliability in industrial production environments. The line is currently functional in production. Main features - Automatic counting system - Automatic label application with package quantity indication - Integrated folder insert system inside each package - Automatic wrapping and strapping system - Integrated measuring system - High production efficiency: up to 150 m2 per hour - Suitable for long profiles Technical specifications - Maximum plank length: 3100mm - Maximum plank width: 270mm - Widest point of the complete line: 3100mm Machine configuration and power requirements 1. Strapex system - 5.6 AMP 2. Parscan System - 10 AMP 3. Packaging Machine - 6 AMP 4. Oven - 40 AMP 5. Destacker - 25 AMP Dsdpfxjy Rffte Afkeuu The line can be inspected in operation and is immediately available upon agreement. Keywords: Labeling, Destacking, Stacking, Strapping, Packaging, Packing, Parquet, Wood, Wrapping, Folder, Shrinking, Shrinkoven

Year of construction: 2018, condition: good (used), Fully automatic angle welding machine / Fully automatic side welding machine Manufacturer: Diez Type: AWS-C 9070 CS Year of manufacture: 2018 Shrink tunnel Manufacturer: Diez Type: HTC 122-40D Year of manufacture: 2018 Dsdpfx Afstzcd Sekeuu Control side: Left, in the direction of travel Passage width: approx. 600 mm Passage height: approx. 190 mm Welding length: approx. 900 mm Working height / belt height infeed/outfeed: approx. 860 mm + 100 Performance: Up to 30 cycles/min (depending on package size and feed speed) Connection voltage: 230V AC, 50Hz, 1 phase + N + PE Power consumption: 3.5 KW Rated current: 10 A With cable and 16A Schuko plug Compressed air connection: 6 bar External dimensions: Length: 2600 mm Width: 2000 mm Height: 1500 mm 3626

Condition: refurbished (used), Year of construction: 1996, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Dimensions and travel paths Tool holder SK 40 Table dimensions mm 4000 x 800 Number of T-slots 6 Distance between T-slots mm 140 Distance between spindle bottom edge min. mm 140 Table top edge max. mm 740 Drilling radius min mm 540 max. mm 1590 U-axis travel path mm 2600 Y-axis travel path mm 1050 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 400 Cutting values Drilling capacity into solid material St 60 mm 40 GG 22 mm 50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 200 Feed drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 U-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (U/W): m/min. 7.5 / 3 Feed rates infinitely variable mm/min. 5 - 2000 Feed force N 12000 Accuracy Positioning accuracy X, Y axis up to 1200 mm mm ± 0.075 Repeatability X, Y axis mm ± 0.03 Dusdov If T Topfx Afkou Positioning accuracy Z axis mm ± 0.05 Repeatability Z axis mm ± 0.03 Positioning accuracy W axis mm ± 0.05 Repeatability W axis mm ± 0.03 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 13.0 CNC control Axes: 5 (X, Y, Z, W, U), expandable Screen: TFT flat screen backlit, easy to read from all sides Position information: Cartesian or polar, dimensions absolute or incremental, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, cutting data suggestions depending on material Tool management: max. 500 tools Sub-program technology: yes Machining cycles: cycles for centering, drilling, thread cutting, reaming, countersinking and boring, freely programmable cycle for special tools, dwell time possible for each cycle Chip breaking / chip removal: possible for drilling cycle Drilling patterns: row of holes, circle of holes, matrix Basic software: programming in dialog, 38 zero point shifts, turning and mirroring, teach-in for X, Y, Z, restart in the program with optional functions for targeted entry Zero point determination: cycles for determining zero points by manually touching the workpiece for: - any clamped right-angled parts - any clamped round parts - mediation of cast and burnt parts - Angular position detection for round parts by touching - reference edges or surfaces Data interfaces USB interface Painting (new painting) Standard painting, two-component textured paint Machine upper part light gray RAL 7035 Machine lower part signal blue RAL 5005 Documentation Operating and programming instructions Electronics circuit diagram Spare parts drawings Test report for mechanics, electrics and safety equipment

Condition: used, Year of construction: 2000, functionality: fully functional, feed length X-axis: 4,000 mm, feed length Y-axis: 1,050 mm, feed length Z-axis: 200 mm, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Dimensions and Travel Ranges Tool holder: SK 40 Table dimensions: mm 4000 x 800 Number of T-slots: 6 T-slot spacing: mm 140 Distance: - Spindle bottom edge: min. mm 140 - Table top edge: max. mm 740 Boring radius: - min. mm 540 - max. mm 1590 Travel range U-axis: mm 2600 Travel range Y-axis: mm 1050 Quill stroke (Z-axis): mm 200 Column stroke (W-axis): mm 400 Machining Data Drilling performance in solid material: - St 60: mm 40 - GG 22: mm 50 Thread cutting: - St 60: M 36 - GG 22: M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min-1 15 - 2800 Torque: Nm max. 250 Constant from: min-1 15 - 200 Feed drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 U-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (U/W): m/min 7.5 / 3 Feed rates, infinitely variable: mm/min 5 - 2000 Feed force: N 12000 Accuracy Positional accuracy X, Y axis at 1200 mm: mm ± 0.075 Repeatability X, Y axis: mm ± 0.03 Positional accuracy Z axis: mm ± 0.05 Repeatability Z axis: mm ± 0.03 Positional accuracy W axis: mm ± 0.05 Repeatability W axis: mm ± 0.03 Electrical data Operating voltage / frequency: V / Hz 400 / 50 Control voltage: V 24 Total connected load: kVA 13.0 CNC control Axes: 5 (X, Y, Z, W, U), expandable Screen: TFT flat screen, backlit, easily readable from all sides Position data: Cartesian or polar, dimensions absolute or incremental, Unit of measurement: mm or inch, or in degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions according to machining process, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram technology: yes Djdoy Ttrtopfx Afkouu Machining cycles: Cycles for centering, drilling, threading, reaming, countersinking and boring, freely programmable cycle for special tools, dwell time possible in each cycle Chip breaking / chip removal: possible in drilling cycle Drilling patterns: Hole pattern, hole circle, matrix Basic software: Programming in dialog mode, 38 zero-point offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - aligning cast and sintered parts - Angle detection for round parts by probing the reference edges or surfaces Data interfaces Paint finish with signs of use Standard paint finish, two-component textured paint Machine upper part: light grey RAL 7035 Machine lower part: light blue RAL 5012 Documentation Operating and programming manual Electrical wiring diagram Spare parts drawings Test report for mechanics, electrical system and safety devices

Condition: used, Year of construction: 1994, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm weight of the machine ca. 4,5 t lock stroke 230 mm capacity of ejector 40 kN ejector stroke 70 mm height of form 120-350 mm column diameter 56 mm casting capacity 55 kN casting plunger stroke 130 m/m injection plunger diameter 45,50,55 mm casting volume (DIN 24480) 76,121,165 cm 2 volume cast pressure 345,280,231 kp/cm² casting area 174,214,260 cm 2 Traverse Stroke 150 m/m Used Die Casting machine DAW 50 without control and equipment. Dodpfx Afstuxmyskeuu As a basic machine for general overhaul in the overhaul plant. It can be carried out in the scope of agreement.

Condition: used, Year of construction: 1995, closing pressure 2200 kN clamping plate 755x755 mm distance between columns 500x500 mm weight of the machine ca. 8 t lock stroke 430 mm capacity of ejector 110 kN ejector stroke 100 mm height of form 250-600 mm column diameter 85 mm casting capacity 130 kN casting plunger stroke 175 mm injection plunger diameter 70,80,90 mm casting volume (DIN 24480) 450,636,856 cm ³ volume cast pressure 335,260,203 kp/cm² casting area 656,846,1078 cm 2 Traverse Stroke 230 mm Used Die Casting machine DAW 200 S with Datavario control for the use of zinc alloys. Available in accordance Dsdpfx Aevxlufofksuu Recommendation from the manufacturer is general overhaul in the overhaul plant. It can be carried out in the scope of agreement.

Condition: used, Year of construction: 1999, closing pressure 3150 kN clamping plate 900x900 mm distance between columns 550x550 mm weight of the machine ca. 15,5 t lock stroke 500 mm capacity of ejector 159 kN ejector stroke 120 mm height of form 300-700 mm Duodpfovfhrtsx Afksu column diameter 110 mm casting capacity 158 kN casting plunger stroke 250 mm injection plunger diameter 70,80,90,100 mm casting volume (DIN 24480) 514,791,1105,1455 cm 2 volume cast pressure 410,316,249,201 kp/cm² casting area 768,996,1265,1597 cm 2 Traverse Stroke 300 mm Used Die Casting machine DAM 315 S with Datacontrol for the use of magnesium alloys. Available from used machine stock. The machine is equipped with an electric furnace from Rauch Typ MMO 315E. Without sprayer. Recommendation from the manufacturer is some repair / general overhaul in the overhaul plant. It can be carried out in the scope of agreement.

Condition: new, Year of construction: 2024, closing pressure 2200 kN clamping plate 755x755 mm distance between columns 500x500 mm weight of the machine ca. 8 t lock stroke 430 mm capacity of ejector 110 kN ejector stroke 100 mm height of form 250-600 mm column diameter 85 mm casting capacity 130 kN casting plunger stroke 175 m/m injection plunger diameter 70,80,90 mm casting volume (DIN 24480) 450,636,856 cm ³ volume cast pressure 335,260,203 kp/cm² casting area 656,846,1078 cm 2 Traverse Stroke 230 m/m Used Die Casting machine DAW XX with XX control and real-time injection for the use of zinc alloys. Available from used machine stock. The machine is equipped with an electric furnace from Rauch Typ XX and used pneumatic sprayer XX. Without sprayer. Recommendation from the manufacturer is some repair / general overhaul in the overhaul plant. It can be carried out in the scope of agreement. ----- Used Die Casting machine DAW XX with XX control for the use of zinc alloys. Available from used machine stock. On the machine some repairs were carried out by us as manufacturer. Amongst other things, the closing unit was overhauled, all cylinders new sealed and recognizable defective parts replaced. The machine is equipped with an electric furnace from Rauch Typ XX and used pneumatic sprayer XX. Without sprayer. ----- Used Die Casting machine DAW XX without control and equipment. As a basic machine for general overhaul in the overhaul plant. It can be carried out in the scope of agreement. Djdpfx Aevvx Hcjfkjuu

Year of construction: 2006, condition: excellent (used), Dispensing hot food products is normally associated with a number of health and safety risks. These risks are minimized with a fully automated dispensing system. The controls make sure that the operator avoids any direct contact with the 90°C hot product. The automatic bag-packing unit seals the bags once they are filled. Furthermore the need for lifting products over long distances is reduced since the ready packaged dishes are transported from the filling station to the operator via a small conveyer belt. This prevents inappropriate working positions. HOT-FILL DOS 3 ensures uniform portions. The quantity is controlled via the touch- screen display. The display also controls how quickly the product is to be dispensed allowing for flexibility in the workflow. Dodpfxoh A Hbxo Afkjuu The fully automated HOT-FILL DOS 3 sucks the product directly from the kettle and is fitted with a temperature alarm consistently ensuring the correct temperature of the product.

Condition: good (used), Year of construction: 1978, machine/vehicle number: 973, Offer 26099 Technical data: - Drilling capacity in steel ST 60: 32 mm - Drilling capacity for step drilling: 40 mm - Thread cutting device - Drill spindle mount: MK 3 - Drill spindle stroke: 200 mm - Outreach min / max: 250 / 1000 mm - Stroke of the arm: 600 mm - Min. / max. distance: - Spindle - base plate approx.: 650 - 1250 mm - Processed base plate clamping surface: B 1150 - 700 mm - 12 spindle speeds: 56 - 1220 rpm - 4 feed rates: 0.15 - 0.30 mm/rev - Drill spindle drive: 400 V / 3.5 kW - Square table Duedpfx Afsy U Htaskju - Space requirement approx.: W 1700 x H 1960 + 500 x D 700 mm - Weight approx.: 1200 kg

Condition: new, Year of construction: 2026, machine/vehicle number: 2026, functionality: fully functional, NEW ++ NEW Unox Speed Compact Hot Air Oven NEW ++ NEW Unox Speed oven for baking, cooking & steaming Touch control/operation with ADAPTIVE Cooking & SPEED Plus 384 cooking programmes & 10 favourite programmes can be stored Tray size 300 x 300 mm Temperature range from +30°C to 280°C Oven-Microwave-Hot Air Flows Dimensions: 424 x 669 x 616 mm (W x D x H) Connection 220-240V, Schuko plug Dedpfxexckaks Afkjuu New unit with warranty & spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Options: Special trays Spees.Bake tray Quick.Rinse hand shower Speed Marks Ethernet connection DDC.App Spray & Rinse cleaner Maintenance contract Delivery service Commissioning & instruction Visit our large oven showroom!

Condition: used, Year of construction: 1983, nominal force 2500 t stroke 600 mm Dsdpfx Asyx Inaefkjuu cycle time 13 - 18 s distance between columns 1720 mm Distance table/ram, max. stroke up, adjustment up 2600 mm table surface area 1720 x 1800 mm allowed max. force 4000 t blow die to die 5000 t ram surface 2100 x 1320 mm capacity of ejector in table 40 t ejector stroke in table 250 mm ejector surface area in table 900 x 820 mm capacity of ejector in ram 6 t ejector stroke in ram 40 mm spindle diameter 425 mm power requirement 900,0 kW weight 335,0 t Dimensions (WxDxH) 3,4 x 4,6 x 9,7 m height over floor 8,3 m fully automated forging line / spindle press with automation for the production of flanged shafts for hot forming only with reversible AC motor, pneumatic brake, plate ejector in table (40 t / 250 mm), ejector in ram (6 t / 40 mm), lifting device for repositioning, marking, tool change, insertion device, tilting device, loading and unloading arm, rotary table, circular oil lubrication, centralised grease lubrication cycle time approx. 13 - 18 s as is where is, WITHOUT putting into operation

Year of construction: 2018, condition: used, 1 unit, WMF 035500 fully automatic espresso machine with portafilter Dusdpfxey Tk I Ej Afkju Two integrated grinders, automatic tamping, air-cooled bean hoppers, 380-415 volts, 6.0 - 7.0 kW, 50/60 Hz, fixed water connection, the machine was last serviced on 02/26. Color: as shown in the images Year of manufacture: 2018 Machine number: 08616 Condition: used

Condition: used, Year of construction: 1965, bore capacity in steel (diameter) 45 mm arm length 325 / 1000 mm workpiece height max. ca. 1000 mm Duedpfsvh Nb Isx Afksu spindle taper MT 4 spindle turning speed range 40 - 1700 U/min feeds 0,125 - 1,25 mm/U distance spindle/base plate 385 / 1400 mm quill stroke 325 mm crossrail adjustment vertical 700 mm 360 ° boring head horiz. adjustable 675 mm base plate surface area 1300 x 800 mm total power requirement 6,2 kW weight of the machine ca. 3,8 t dimensions of machine L x W x H 2,30 x 0,98 x 2,82 m - autom. feed - right-/left spindle run Accessories: box table 1000 x 750 x 500 mm, hydr. vice, width of jaws 200 mm, coolant

Condition: used, Year of construction: 1980, bore capacity in steel (diameter) 50 mm arm length 1250 mm distance spindle/base plate 1350 mm bore capacity in cast iron 60 mm spindle taper MK 5 spindle turning speed range 12,5 - 1000 U/min feeds 0,06 - 0,5 mm/U crossrail adjustment vertical 620 mm column diameter 350 mm total power requirement 7,7 kW weight of the machine ca. 4,6 t dimensions of machine L x W x H 2,53 x 1,15 x 2,82 m Accessories: swivelling box table, coolant Dsdpfxjvh Nbzj Afkouu - additional column guide at the end of arm -

Condition: used, Year of construction: 1991, bore capacity in steel (diameter) 50 mm arm length 1100 mm workpiece height max. ca. 1000 mm bore capacity in cast iron 60 mm spindle taper MK 5 spindle turning speed range 28 - 2500 U/min Dedju Sblwspfx Afkjuu feeds 0,05 - 2 mm/U quill stroke 300 mm distance basic plate - spindle nose 630 - 1380 mm crossrail adjustment vertical 750 mm total power requirement 6 kW weight of the machine ca. 4 t dimensions of machine L x W x H 2,74 x 1,14 x 2,59 mm - with thread cutting attachment - Accessories: box table 550 x 550 x 550 mm, vice, coolant

Condition: used, Year of construction: 1970, bore capacity in steel (diameter) 50 mm arm length 1250 mm workpiece height max. ca. 1150 mm bore capacity in cast iron 60 mm spindle taper MK 5 spindle turning speed range 25 - 2000 U/min Duedjvh Nbhopfx Afkju feeds 0,06 - 0,5 mm/U crossrail adjustment vertical 620 mm column diameter 350 mm total power requirement 7,5 kW weight of the machine ca. 4,6 t dimensions of machine L x W x H 2,50 x 1,08 x 2,50 m Accessories: box table 1100 x 700 x 550 mm, coolant pump

Condition: used, bore capacity in steel (diameter) 120 mm arm length 2500 mm workpiece height max. ca. 1800 mm bore capacity in cast iron 160 mm drilling radial min./max. 880 / 2825 mm throat min. 555 mm column diameter 650 mm bore spindle diameter /taper 90 / MK 6 mm Dedpfovh Ncxsx Afkjuu diameter of quill 160 mm bore spindle turning speed range 10 - 660 U/min bore depth 650 mm feeds 0,07 - 3,0 mm/U distance spindle/base plate min. 300 / max. 2100 mm vertical adjustment of the arm 1150 mm base plate surface area 3000 x 1550 mm total height of machine 4500 mm total power requirement 15 kW weight of the machine ca. 16 t - right-/left spindle run - thread cutting device Accessories: DRO HEIDENHAIN on X-and Z-axis (arm and boring depth)