Used Forestry Mower for sale (287)

Condition: new, axle configuration: 2 axles, suspension: air, tire size: 245/70-17,5, Equipment: ABS, - EBS (Electronic Braking System) - LED lighting - Alloy wheels - Air suspension - Spare wheel - Toolbox - Central lubrication - Additional steering axle PAVIC 2-axle forestry machine low loader, type: STLT2Z for harvester transport ---- Upcoming! Color freely selectable!!!! Fifth wheel load: 18,000 kg Axle load: 24,000 kg (technical) Gross weight: 42,000 kg (technical) Unladen weight: 9,300 kg Made in Germany!!!! Chassis made of welded steel construction using high-grade fine-grain steels Lashing eyes: 130 kN per side, 5 units each Additional lashing eyes: 3 pairs on the raised bed Insertable stake pocket system made of galvanized steel with aluminum sideboards (silver anodized) Steel front wall approx. 400 mm high Foldable aluminum loading ramps with mechanical safety lock SKF central lubrication system with reservoir (controlled by brake light), approx. 20 lubrication points Dimensions: Total length: 16,000 mm Bed length including rear section: 11,364 mm Saddle height: 1,330 mm Ground clearance at driving level: 184 mm Kingpin projection: 600 mm R1 dimension (kingpin to front): 410 mm (swing radius) R2 dimension (kingpin to frame): 2,150 mm (swing radius) Further dimensions available on request (technical drawings) Axles: 2 x 12,000 kg (technical), Gigant with drum brake, in combination with 8 pcs. 245/70 R17.5 premium tires on Alcoa Dura Bright rims Suspension: Bljdpeyr Izxofx Aqtei Pneumatic with lifting and lowering function Second ride height + approx. 50 mm can be activated from the driver’s cab. When speed exceeds 20 km/h, the trailer lowers automatically. Including axle load gauge Coupling device: 2'' kingpin (interchangeable, single position) WITHOUT landing gear! -> Customers typically use a wide wooden beam under the front frame. Brake system: Wabco EBS with axle load measuring system (Smartboard) incl. odometer Parking brake: spring-actuated Lighting system: 2 pairs of tail lights (3-chamber lights) Side marker lights LED Outline marker lights LED Front and rear position lights LED Reversing and auxiliary lights, each in a round design License plate light LED 1 round beacon, plug-in and cab-operated via separate switch 4 x LED work lights 4 x oversize markers, double-secured (wing screw and pin) with LED lighting red/white Steering: Tridec HF-E (hydraulic forced steering on both axles) including automatic centering and straight-ahead function. Remote control Tridec (wireless remote), also operable by cable Paintwork: Entire steel structure shot-blasted after welding and primed with special adhesion primer. Subsequent 2-component paint finish in RAL color of choice. Axles and wheel hubs painted black or, for an extra charge, finished in RAL color Other mounted parts are galvanized and/or painted/powder-coated or made of aluminum (with or without anodization) Approval: Including §13 report Including §70 report (customer must provide a suitable and approved 3-axle tractor unit); includes, among other things, turning circle test at TÜV Nord in Meppen. This is a non-binding offer. Subject to prior sale, errors, and changes. Axle configuration Tire size: 245/70-17.5...

Condition: new, Equipment: crane, Immediately Available Stock Cranes!!! TajfunLIV – Official General Importer for Germany and your trusted partner for timber transport: PAVIC The TajfunLIV 155ZK represents the new generation of timber loading cranes, now capable of handling significantly higher loads thanks to a linkage system on the jib arm. The crane also boasts exceptionally fast working speeds, ensuring that skilled operators get exactly what they demand: PERFORMANCE including DYNAMICS. Available as platform seat / high seat crane or optionally as a cabin crane. Various configuration and equipment options are available, depending on the crane type and variant: - Hydraulically adjustable cabin with electric air conditioning, diesel auxiliary heater, and radio - Proportional control valves - Folding protective roof - Heated seat - Radio remote control - Long timber support - Grapple holder on the jib arm - Swing-out stabilizers - etc. Tajfun Liv is a European company based in our neighboring country, Slovenia, specializing in the manufacture of timber loading and recycling cranes. The product range includes cranes for offroad, onroad, recycling, forestry winches, bulk and timber grapples. Four decades of experience guarantee reliable and high-quality products. Only components from renowned European suppliers are used. PAVIC is the general importer for Germany, ensuring you benefit from maximum flexibility and optimal pricing. Naturally, we can also provide a matching short timber body or install the crane onto your supplied truck chassis and equip it with your new TajfunLIV loading crane. Of course, we also offer professional installation and commissioning of a TajfunLIV crane on your existing vehicle at a fair price. Blodeylulwopfx Aqtoi Feel free to contact us for your personalized quote. For any further questions, our sales team will be happy to assist you. = More information = Crane: TajfunLIV Damage: None Price: On request

Condition: new, functionality: fully functional, Year of construction: 2025, SCHORR RR200THX – Professional Wood Chipper for Branches up to 200 mm ✅ New & In Stock ✅ Shipping Available ✅ Self-Feeding The SCHORR RR200THX is a powerful drum wood chipper designed for professional use. It easily processes branches and trunk sections up to 200 mm in diameter and impresses with its robust construction, high throughput, and user-friendly operation. Equipped with a 25 HP petrol engine, this chipper delivers ample power for daily tasks in gardening, landscaping, and forestry. The electric start (e-starter) ensures comfortable and reliable startup—even in cold temperatures. The self-feeding cutting system, featuring 2 blades and 1 counter-blade made of hardened steel, guarantees a clean chipping result and consistent material flow. The large feed opening allows for quick and safe material input, even with heavily branched wood. The discharge chute is rotatable 360°, allowing you to direct the wood chips precisely—into piles, trailers, or big bags. Advantages - Self-feeding: No manual pushing required - E-starter: Convenient push-button starting - Robust cutting system: Hardened steel blades for long service life - Heavy-duty steel frame: Stable, torsion-resistant, and durable - 360° discharge chute: Flexible direction of chip output - Easy maintenance: Simple access to blades, filters, and oil - Mobile: Drawbar with parking brake for secure stationary placement and transport Technical Data Manufacturer: SCHORR Model: RR200THX Drive type: V-belt Max. branch thickness: 200 mm Chipping type: Drum, self-feeding Number of blades: 2 + 1 counter-blade Weight: 255 kg Overall length: 2819 mm Overall width: 1217 mm Overall height: 1550 mm Discharge chute angle: 360° Engine power: 19 kW / 25 HP Displacement: 764 cc Starting system: E-starter The RR200THX is built for long-term use. All components are easily accessible, allowing maintenance to be carried out quickly. Spare parts are available from stock at any time. Upon request, we offer technical service and repairs in our own workshop or directly at your site. Bodpfxjxu I T Eo Aqtoli Financing Leasing or installment payment available—please contact us for details.

Condition: used, Year of construction: 2013, _____hydraulic boom-type slope mower, reach of approximately 6.00 meters, rear-mounted with 3-point linkage, new Y-shaped blades on the mulching head, location: null Bodpfx Aqozgzrrotoli

Condition: used, Year of construction: 2026, operating hours: 380 h, TECHNICAL SPECIFICATIONS KÄSSBOHRER POWERBULLY 18T WITH PALFINGER PK 23002 SH E POWER LINK PLUS Note: The vehicle is from the 2019/2020 production run. Acceptance/initial registration is from 2026. GENERAL DESIGN ? High-performance tracked vehicle for professional use in challenging terrain ? Vehicle built on a Kässbohrer PowerBully 18T chassis ? Equipped with a hydraulic PALFINGER PK 23002 SH E Power Link Plus loading crane ? Suitable for assembly, lifting, and transport work in difficult terrain ? Can be used on peatlands, forest paths, routes, mountainous regions, and nature reserves CHASSIS ? Manufacturer: Kässbohrer ? Type: PowerBully 18T ? Tracked vehicle with hydrostatic drive ? Cummins B6.7 turbocharged diesel engine ? Engine power: 231 kW (310 hp) ? Emission standard: EU Stage V ? Maximum speed: approx. 13 km/h ? Permissible total weight: 30,000 kg ? Low ground pressure due to wide rubber tracks ? Can turn on the spot OFF-ROAD CAPABILITIES ? Climbing ability up to 60% ? Side slope up to 40% ? Wading depth up to 1,400 mm ? High traction on soft and uneven surfaces ? Environmentally friendly operation on sensitive surfaces ? Ideal for work off paved roads CAB ? Safety cab with ROPS/FOPS design ? Air conditioning ? Air-suspended comfort seat ? Electronic vehicle control ? Touchscreen control panel ? Rear view camera ? LED work lights ? GPS telemetry and fleet management system CRANE Manufacturer / Type ? PALFINGER PK 23002 SH E Power Link Plus ? Hydraulic articulated boom loading crane ? Endless slewing ring ? Hydraulic six-stage extension boom Performance data ? Lifting moment: 21.5 mt (215 kNm) ? Maximum lifting capacity: approx. 6,200 kg ? Maximum hydraulic reach: approx. 17.10 m ? Lifting capacity at maximum outreach: approx. 890 kg ? Precise load positioning thanks to sensitive hydraulic control Crane equipment ? PALCOM radio remote control ? PALTRONIC overload protection system ? HPSC stability monitoring system ? Active vibration damping ? Hydraulic winch ? Four-point outriggers ? Additional hydraulic connections for attachments ? LED work lights on the crane AREAS OF APPLICATION ? Overhead power line and electricity pole construction ? Wind turbine service ? Pipeline and pipeline construction ? Telecommunications and radio mast construction ? Specialized forestry work ? Work in peatlands and nature reserves ? Disaster control and rescue operations ? Assembly and lifting work in difficult-to-reach terrain PARTICULAR ADVANTAGES ? Combination of a transport vehicle and a powerful loading crane ? Extremely low ground pressure for sensitive surfaces Bledpfxszhhmfe Aqtei ? High payload with excellent off-road performance ? Safe working even under the most challenging conditions ? Economical alternative to mobile cranes in difficult terrain ? High flexibility for energy suppliers, network operators, and specialized civil engineering companies SUMMARY The Kässbohrer PowerBully 18T with the mounted PALFINGER PK 23002 SH E Power Link Plus combines maximum off-road capability with powerful crane technology. Due to its extremely low ground pressure, high payload, and a reach of over 17 meters, the machine is particularly suitable for lifting, assembly, and transport tasks in areas that cannot be reached with conventional truck cranes or construction machines.

Condition: used, mileage: 194,905 km, power: 210 kW (285.52 HP), first registration: 05/2007, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 2 axles, color: orange, Year of construction: 2007, Equipment list: * Vario Pilot * Front mounting plate size 3 * Main battery switch * 12V trailer socket * Large Ringfeder trailer coupling * Hydrostatic drive * Automatic shift * Hydraulic system circuit 2 * Front quick couplers 8+separate return * Rear quick couplers 4+separate return * High-performance hydraulics circuit 3+4 * Front PTO * Additional headlamps * Rear work lights * 2 beacon lights * 2 flashing beacons * Mower door (window defective) Other information: * Trade-in and purchase of vehicles and machinery possible. * Sale price exclusive of transport * No liability for printing and typographical errors. * Subject to error, change and prior sale. * Offer non-binding. * Photos may differ. Price applies to current condition. Blodex R Uwxspfx Aqtoi * All information without guarantee. Further information Operating hours: 12,592 General condition: good Serial number: WDB4052011V213048

Condition: used, Year of construction: 2023, operating hours: 1 h, MULAG Combination Mowing Device MKF 600 for Mounting on Unimog Mowing combination MKF600 consisting of: - Front boom mower MFK 500 - Verge mower MRF Base unit for single or dual-operator use, designed for front mounting plate size 5 with the following specification: Equipment Front Boom Mower MFK 500 * Designed for right-hand operation * Boom swivel range: 190 degrees * Hydraulically actuated collision protection with damping of the boom system via hydraulic accumulators * Hydraulic lateral shift of the boom by 1300 mm (in combination operation) / 1800 mm (in solo operation) * Float position of mowing units can be switched on/off * Quick-change device for mowing units * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve * Operating hours counter * Proportional mlcontrol permanent hydraulics included * (CAN bus technology) for the boom, including dual-cylinder actuation (multiple functions may be performed simultaneously) * Boom relief regulation type AER with stepless ground pressure adjustment via potentiometer, can be switched on/off * Operator information system with TFT color display, including system monitoring and diagnostic support * Multifunction lever mlbasic single-handed control unit with multifunction lever (ergonomically designed for right hand use, 4 functions on one plane. All functions are proportionally controllable) * Combination control panel * Control of both units via multifunction control lever * Oil cooling system with electric temperature monitoring included * Tool drive via front PTO * Hydraulic pump for 1st implement drive 62l / 340 bar * Hydraulic pump for 2nd implement drive 50l / 280 bar * Filled with Panolin HLP Synth, fully synthetic, rapidly biodegradable hydraulic oil * Telescopic boom system hydraulic adjustment for extending reach by 1,000 mm * Reach 6.50 m from vehicle center in combination operation * Reach 7.00 m from vehicle center in solo operation * 2-way electro-hydraulic switching valve controlled from operator panel (additional hydraulic dual functions) * Hydraulic rotation device for mowing implements, swivel range of 230°, operable from control panel. Boom side integrated, including quick-change plate * Hydraulic couplings: Quick coupling kit for flat-sealing quick couplers on mower * Cable set ES6 Front Unimog Connection of operator panel via universal electrical interface ES6 of Unimog * Hydraulic stabilizer legs included, 2 pieces, height adjustable * LED work lights, 2 pieces, mounted on boom * High-pressure water hose routing on boom Verge Mower MRF 350 consisting of the following configuration: Verge Mower MRF 350 * For right-hand operation * Reach 3.50 m from vehicle center * Hydraulic lateral adjustment of verge mower by 1000 mm (in combination operation) * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve (knife shaft overrun limited to approx. 4 seconds) * Operating hours counter * Sensing automatic: control of the mowing head around obstacles. Mowing speed adjustment for evasive movement is steplessly adjustable by the operator at the control panel. Bjdpfx Aqox R Uw Setsli * Single-hand operation unit with holder in Unimog Verge Mowing Head RMK 1200 * Working width: 1200 mm, Cutting thickness: max. 10 mm * MS-R blade * Knife shaft speed: approx. 3000 rpm * Standard sensing arm Mowing Head MK 1200 plus * Working width: 1200 mm, Cutting thickness:

Condition: used, functionality: unexamined, Year of construction: 2014, Komatsu 941.1 forestry harvester Manufacture year: 2013 / Model year: 2014 with harvesting head (believed to be model S132) Bjdpsy N R Tgefx Aqtoli Usage - TBC

Condition: used, Year of construction: 2024, operating hours: 206 h, JCB 270T S5 Compact Track Loader Forestry cab armour (ideal for mulching operations!) Blsdpfx Ajyfrgfjqtoi Only 206 operating hours! Year of manufacture: 2024 Rubber tracks 450 mm (86 mm pitch x 56 links) 74 hp / 55 kW JCB turbo engine 2 speed ranges LED headlights front and rear Cab door opens rearward sideways for easier entry and exit Cab with heating and air conditioning Reversing alarm Radio and speakers Landscaping bucket 2,134 mm wide (0.64 m³) Industrial pallet fork carrier Smooth Ride System Hydraulic quick coupler Immediately ready for use; a wide range of additional attachments in stock. Viewings by appointment are expressly requested. We are happy to provide you with a leasing or financing offer on request. Mr. Mihm (phone) will be happy to assist you. Further information is available on our website. Errors and prior sale excepted! Quick Coupler System = Further Information = Drive: Track Please contact Tobias Ebert for more information.

Condition: used, Year of construction: 2024, _____Technical data: Working width: 3.51 metersCutter bar: OPTIDISC ELITENumber of mower discs with tempered steel disc protection skids: 8Cutter blade attachment with FAST-FITE knife quick-release fastenerAdjustable cutting height with the standard 35-65 mm skidsDisc shaft overload protection: PROTECTADRIVEarth adjustment: center suspension of the mower unitAdjustment of relief: hydropneumatic relief LIFT-CONTROL collision protection: NONSTOP collision protectionLift for swath crossing: Via the integrated implement lifting cylinderAverage swath width: 2.80 metersSwathing disc: ExternalAttachment: Three-point linkage Cat. 2Adjustable attachment, adjustable: 2 positions - offset by 190 mmConversion to transport position: Hydraulic 90° swivel to the rear (horizontal) with automatic lockingPTO shaft speed: 1.000PTO shaft with overload protection: Slipping clutch on the intermediate PTO shaftFreewheel: Standard, integrated in the side gearboxPTO power requirement: 36 kw / 49 hpRequired hydraulic connections on the tractor: 1 EW*+ 1 DW control unit (*only for setting the ground contact pressure)Lighting system with warning signs- at the rear of the machineWeight: 950 kg,Storage location:null Bljdpfx Aeth Ny Nsqtji

Condition: used, Year of construction: 2026, operating hours: 380 h, TECHNICAL SPECIFICATIONS KÄSSBOHRER POWERBULLY 18T WITH PALFINGER PK 23002 SH E POWER LINK PLUS Note: The vehicle is from the 2019/2020 production year. Acceptance/initial registration is from 2026. GENERAL DESIGN ? High-performance tracked vehicle for professional use in challenging terrain ? Vehicle built on a Kässbohrer PowerBully 18T chassis ? Equipped with a hydraulic PALFINGER loading crane, PK 23002 SH E Power Link Plus ? Suitable for assembly, lifting and transport work in difficult terrain ? Can be used on peatlands, forest paths, tracks, mountainous regions and nature reserves CHASSIS ? Manufacturer: Kässbohrer ? Type: PowerBully 18T ? Tracked vehicle with hydrostatic drive ? Cummins B6.7 turbocharged diesel engine ? Engine power: 231 kW (310 hp) ? Emission standard: EU Stage V ? Maximum speed: approx. 13 km/h ? Permissible total weight: 30,000 kg ? Low ground pressure due to wide rubber tracks ? Ability to turn on the spot OFF-ROAD CAPABILITIES ? Gradient capability up to 60% ? Lateral inclination up to 40% ? Wade depth up to 1,400 mm ? High traction on soft and uneven surfaces ? Environmentally friendly operation on sensitive surfaces ? Optimal for work away from paved roads CAB ? Safety cab in ROPS/FOPS design ? Air conditioning ? Air-suspended comfort seat ? Electronic vehicle control ? Touchscreen operating terminal ? Rear view camera ? LED work lights ? GPS telemetry and fleet management system CRANE SYSTEM Manufacturer / Type ? PALFINGER PK 23002 SH E Power Link Plus ? Hydraulic knuckle boom loading crane ? Continuous slewing system ? Hydraulic six-stage boom extension Performance data ? Lifting moment 21.5 mt (215 kNm) ? Maximum lifting capacity approx. 6,200 kg ? Maximum hydraulic reach approx. 17.10 m ? Lifting capacity at maximum outreach approx. 890 kg ? Precise load positioning through sensitive hydraulic control Crane equipment ? PALCOM radio remote control ? PALTRONIC overload protection ? HPSC stability monitoring ? Active vibration damping ? Hydraulic winch ? Four-point outriggers ? Additional hydraulic connections for attachments ? LED work lights on the crane AREAS OF APPLICATION ? Overhead power line and electricity pylon construction ? Wind turbine service ? Pipeline and pipeline construction Bledpfozdl R Tox Aqtsi ? Telecommunications and radio mast construction ? Forestry special work ? Work in moorlands and nature reserves ? Disaster control and rescue operations ? Assembly and lifting work in difficult-to-access terrain PARTICULAR ADVANTAGES ? Combination of a transport vehicle and a powerful loading crane ? Extremely low ground pressure for sensitive surfaces ? High payload with excellent off-road capability ? Safe operation even under the most difficult conditions ? Economical alternative to mobile cranes in difficult terrain ? High flexibility for energy suppliers, network operators and specialist civil engineering companies SUMMARY The Kässbohrer PowerBully 18T with a PALFINGER PK 23002 SH E Power Link Plus offers maximum off-road capability combined with powerful crane technology. Thanks to the extremely low ground pressure, high payload and a reach of over 17 meters, the machine is particularly suitable for lifting, assembly and transport tasks in areas that cannot be reached with conventional truck cranes or construction machinery.

Condition: used, Used truck tarpaulins already disassembled for pickup various sizes available in multiple quantities ##### PLEASE CALL - NO EMAILS! ##### PICKUP ONLY, BY APPOINTMENT! Bsdozidqvjpfx Aqtjli #####

Condition: excellent (used), power: 78 kW (106.05 HP), fuel type: diesel, fuel tank capacity: 120 l, color: other, lifting height: 3,350 mm, Year of construction: 2023, operating hours: 1,168 h, Equipment: air conditioning, Number of cylinders: 4 GVW: 5.643 kg Dimensions (LxBxH): 390 x 203 x 211 cm Engine type: Bobcat DM03VA Working width: 203 cm Quick coupler system: Yes CE mark: yes Technical condition: very good Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit - 4th Hydr. circuit - FOPS cabin protection - Forestry protection kit - High Flow - Hydraulic quick coupler - Radio Bluetooth - Rubber tracks - Two Speed - Work lamp(s) Bedpfxjzbi Sqo Aqtsli = Remarks = Drivetrain Stage / Tier: Stage V / Tier IV final General Country of production: USA Superflow, Hydraulic quick coupler, 2 speed, Large display, Air conditioning, Forestry protection kit (*Without protectional cab door)

Condition: used, mileage: 153,000 km, power: 70 kW (95.17 HP), first registration: 12/1992, overall weight: 3,200 kg, fuel type: diesel, color: red, next inspection (TÜV): 12/2025, gearing type: mechanical, Year of construction: 1992, total length: 5,345 mm, total width: 1,975 mm, total height: 2,680 mm, number of seats: 9, Equipment: had accident, parking heater, Original German vehicle. In service with a small municipality until 2026, initially used by the fire brigade and then by the municipal works department. This vehicle has civilian truck registration as a "box body truck" and is officially rated for 9 seats in the registration papers. The vehicle was originally operated as a multi-purpose vehicle (MZF), and afterwards was used to transport the municipality’s lawn mower. Only 1 bench seat is permanently mounted. 2 of the 3 bench seats were not used in recent years and are included loose. The original seat belts and mounting bolts are also supplied. A fold-out table with a radio handset is still installed on the left side, and a genuine large fire brigade first aid kit is integrated into the fit-out. OM 602 engine, 5-cylinder naturally aspirated diesel with 2874 cc. The engine always starts perfectly and runs cleanly at first, but after about 20 seconds at idle the running characteristics at idle worsen significantly and smoke develops. Once warmed up, the smoke subsides and the engine runs cleanly again, almost normally. The engine is either heavily worn or there is engine damage. No precise diagnosis so far. The vehicle drives immediately and functions well; typical engine power was fully and consistently available during a brief test drive, but we do not guarantee roadworthiness. A repair is certainly necessary in the near term! For driving short distances or boarding a RORO ship at port under its own power towards Africa, this 310 D appears completely unproblematic. 5-speed manual transmission. 127 km/h top speed. Tow hitch (ball head) with a braked trailer load of 2,000 kg or 750 kg unbraked. Power steering. Bledjyx N Hqopfx Aqtji Factory-installed auxiliary heater Mercedes/Eberspächer (working). Bodywork has isolated rust spots; overall, due to years of storage indoors, the vehicle is still in comparatively good condition. The passenger door window is broken and covered with a film. The paint below has previously been touched up in black. The vehicle clearly received very good maintenance while with the fire brigade—unfortunately, this was not maintained afterwards. Opening the sliding door mechanically deploys a large step. Unladen weight: 2,370 kg. Gross vehicle weight rating: 3,200 kg. External overall vehicle dimensions: Length 5,345 mm / Width 1,975 mm / Height 2,680 mm. The tires (205R14C) are from 2013 and not cracked, tread depth approx. 50-60%. The vehicle is primarily intended for export or for genuine fans of the Bremen transporter who are looking for a completely unvarnished basis for restoration. MOT expired 12/2025, will not be renewed. We do not have our own workshop. We have deliberately priced the vehicle attractively, as genuinely good comparable vehicles are now usually being traded for double or even higher prices. A personal inspection is highly recommended due to the defects and can be arranged by appointment. This offer is only valid for businesses, freelancers, and public authorities of any kind. Sale to private end users is strictly excluded. Subject to prior sale and errors. The purchase price is gross = net, with no VAT incurred (according to §25a of the German VAT Act / margin scheme).

Condition: used, Year of construction: 2019, operating hours: 8,889 h, Equipment: all wheel drive, Tigercat LH822D, a modern tracked harvester (forestry machine). This machine is used in forestry operations to simultaneously fell, delimb, and crosscut trees—a so-called cut-to-length system. Tracked harvester manufacturer: Tigercat Industries Functions: Timber harvesting, delimbing, crosscutting (cut-to-length) Application areas: Forestry, including selective logging and salvage operations Dimensions & Weight * Length (without boom): approx. 5,180 mm * Width: 3,430 mm Bedoyawv Ijpfx Aqtsli * Height: approx. 3,710 mm * Ground clearance: around 685–710 mm * Weight (without attachment): approx. 33,800 kg (ca. 74.6 t) * Tail swing radius: approx. 2,095 mm Drive & Performance * Engine: Tigercat FPT N67 (Stage V, Tier 4f, or non-certified) * Power: approx. 212 kW (284 hp) up to 217 kW (291 hp) at 2,200 rpm Drivetrain / Speed * Maximum speed (low range): approx. 1.6 km/h * Maximum speed (high range): approx. 3.4 km/h Hydraulics & Controls * Main, harvester head, and cooling pumps: piston pumps; additionally, a transmission oil pump * Hydraulic oil reservoir: approx. 204 L Very good condition

Condition: used, maximum load weight: 8,750 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 06/2024, total width: 2,550 mm, Year of construction: 2023, Müller Mitteltal KA-TA-R 11.9 tandem 3-way tipper with lots of extras. Total weight: 11,900kg Standard payload approx.: 8,750kg Clear dimensions: 5,000x2,420x500mm Tires: 385/55R19.5 4-layer paintwork, single color Wheels: silver Chassis/underbody protection: hot-dip galvanized Platform with bulkhead: hot-dip galvanized Axles/springs/fuel tank etc.: black Side and rear wall: RAL 2011 deep orange Reinforced and certified structure in accordance with EN 12642 XL including load securing certificate. (Only in conjunction with 500mm high steel side walls). Rear stanchions screwed, hot-dip galvanized, without top coat. Lashing points LC 5,000 daN recessed at the front. Net hooks integrated at the side and rear in the bearings of the central locking system to the base side wall and 2 additional pieces on the front wall. BPW axles instead of GIANT tipping platform with permanently attached front wall in hot-dip galvanized design, with screwed, galvanized rear stanchions, without additional coating (not with HARDOX floor). Due to the system, the formation of waves during hot-dip galvanization, especially with the large floor panel, cannot be ruled out; complaints in this regard are excluded from the warranty. Tires 385/55R19.5 instead of 235/75R17.5 (floor and coupling height + approx. 110 mm, Code 08.940 ramp length 3,570 mm required). 1 plastic tool box, black, lockable, W=750xH=350xD=300mm (45kg payload with even load), arrangement: on the chassis frame on the right in the direction of travel. 1 pair of aluminum docking ramps without fairway (8 t/pair), 3,570x400x105mm, suitable for rubber-tired and tracked vehicles, 55 kg/each. Two-step access in front of the front wall, on the left in the direction of travel (hot-dip galvanized). Extended connecting lines for agricultural and forestry tractors. Further information New: No Bjdpfx Asvy Tvtjqtsli

Year of construction: 2025, condition: used, For inquiries regarding the attachment, please contact Mr. Herden (tel. ). Westtech Woodgripper WG1600 7-finger grapple / incl. saw unit / incl. infinitely rotatable tilt rotator / incl. OQ70/55 adapter plate / incl. V90 connector / year of manufacture: 2025 / DEMO unit / in stock & immediately available Price: €40,290.00 net / €47,945.10 gross - Grapple opening (mm): 1,800 - Self-weight (base – full equipment) (kg): 530 – 1,375 - Recommended flow rate (l/min.): 60 – 190 - Recommended operating pressure (bar): 100 – 300 - Service weight of rigid carrier vehicle (t): 12 – 22 - Service weight of articulated carrier vehicle (t): 12 – 22 Equipment: - incl. infinitely rotatable tilt rotator incl. 30° mounting bracket - incl. saw unit .404 - version with grease lubrication - Electro-hydraulic switching between grapple and saw unit - incl. OQ70/55 adapter plate - incl. V90 electrical connector We have many adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. In our warehouse, we have a very large selection of various Westtech products that are immediately available! Mr. Herden (tel. ) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Westtech sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are an official Magni telehandler sales and service partner. Bodjzd Nm Sopfx Aqtoli We are an official DMS sales and service partner. We are an official Gierking GMT sales and service partner. We are an official Weber MT sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker range for you! Errors and prior sales excepted! Internal No.: 326033 = Further information = New: No Part suitable for: Application forestry Please contact Marius Herden for further information.

Condition: excellent (used), Year of construction: 2022, operating hours: 2,000 h, functionality: fully functional, XYLOG 800 – The professional log sawing and splitting machine for industrial firewood production The Rabaud XYLOG 800 is the powerful solution for anyone who wants to efficiently and economically produce large quantities of high-quality firewood. As a stationary sawing and splitting machine, it processes logs up to 800 mm in diameter with impressive speed and precision – ideal for forestry operations, timber traders, and commercial firewood producers. Your advantages at a glance: • Highest capacity: Up to 800 mm log diameter – perfect for thick hardwoods such as oak, beech, or ash. • Flexible cutting system: Optional with SUPERCUT chainsaw bar (113 cm, automatic tensioning & lubrication). • Adjustable log length: From 25 to 50 cm – hydraulically adjustable with automatic retraction for maximum efficiency. • Powerful splitter: 16 tons of splitting force with ISO POWER (automatic, continuously variable speed control) and two independent splitting knives. • Safe and precise feeding: 3 independent log clamps, chain feed table (up to 8 m usable length), and V-shaped conveyor belts for safe transport even with crooked or short logs. • High productivity: Saws from bottom to top – saves time with smaller diameters and minimizes waste wood. The XYLOG 800 combines sawing and splitting in a robust, low-maintenance system. It is specifically designed for continuous industrial use and impresses with its durability, low operating costs, and excellent log quality. Perfect for: • Professional firewood production • Forestry companies with high throughput • Wood processors who value uniform, sales-ready logs Significantly increase your productivity – with the Rabaud XYLOG 800, you produce more firewood in less time, with less effort, and higher quality. Request a non-binding offer or a demonstration now! Bljdpfx Ajzgwfhjqtsi The XYLOG 800 – Powerful performance for strong wood.

Condition: used, Used Vehicle * Vehicle No.: - * Mulag Boom Mower MHU 800 Year 2000 * Equipped with mulching head * Driven by hydraulic system * Operated via 2 joystick consoles * Includes 4 support stands * Sale is on behalf of the customer ---- -> Please note that viewing is only possible by prior appointment. Thank you for your understanding. -> Sale is only to businesses or export. The above data, photos, and equipment list serve solely for the general identification of the vehicle and do not constitute a guaranteed specification in the legal sense of a purchase. All information/specifications are provided WITHOUT WARRANTY. Subject to change, prior sale and errors excepted! Bjdpjup Nw Isfx Aqteli The equipment list does not form part of the contract and must be checked in detail on site at the vehicle by each prospective buyer before purchase. Subsequent claims will not be accepted.

Condition: used, power: 16 kW (21.75 HP), first registration: 07/2002, fuel type: diesel, overall weight: 1,500 kg, color: white, gearing type: mechanical, suspension: other, , diesel engine, year of manufacture 2002, 15.5 kW, 500 cm³, 2,300 operating hours, high-dumping capability, center-mounted mower deck, hydrostatic transmission, permissible total weight 1,500 kg. FOR US, THE CONDITION AND OVERALL IMPRESSION ARE DECISIVE; THE PRICE IS SECONDARY. If you have any further questions, Mr. Faller is available to assist you at the following number. //*TRADE-IN, PARTIAL PAYMENT, OR LOAN AGAINST YOUR VEHICLE, AS WELL AS FINANCING, ARE POSSIBLE! All information is without guarantee.* You can find more offers on our website: Bodpfx Aezd Ed Hsqtsli

Condition: used, Year of construction: 2007, power: 1 kW (1.36 HP), gearing type: other, first registration: 09/2007, overall weight: 550 kg, mileage: 1 km, empty load weight: 500 kg, maximum load weight: 50 kg, axle configuration: 4x4, number of seats: 1, driver cabin: other, brakes: other, emission class: none, Equipment: all wheel drive, * Dücker verge mower RSM13/2 * Mowing width 1.30 meters * Mowing head inclination from center position 30° * Cutting system: Flail shaft * Transport width: 2.40 meters * Working speed up to 8 km/h * Max. forward delivery: 3.20 meters * Max. outreach from the center of the vehicle 3.60 meters * Year of construction: 2007 If new TÜV approval is required, we will be happy to provide you with a quote from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. Bledpfexawy Eox Aqtsi All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, mileage: 1 km, power: 100 kW (135.96 HP), first registration: 08/2013, empty load weight: 6,000 kg, maximum load weight: 5,000 kg, overall weight: 2,300 kg, axle configuration: 4x4, brakes: other, color: red, driver cabin: other, gearing type: other, emission class: none, number of seats: 2, Year of construction: 2013, Equipment: all wheel drive, * German equipment * Condition, see photos * Only 6,426 operating hours * Link to video: ?v=q3Q39J2ZX20 * Here is a video * Mower combination Dücker MK25 consisting of base unit, RSM mower & DUA800 boom * We will be happy to send you a video of the MK25 mower combination * Complete documentation * Mower combination Dücker MK25, year of manufacture 2013 * Mower combination with embankment mower and verge mower mounted on booms. Suitable for municipal carrier vehicles and tractors with municipal plate sizes 3 and 5. Operated via CAN-BUS system using two joysticks, a multicontroller, and a touchscreen display. Usable on both left and right sides. Driven by PTO shaft or vehicle hydraulics. Foldable for transport – transport width 2.50 m. Blodpfsw U Afkex Aqtei * DUA 800 boom with 3-part arm and telescopic extension. Reach from vehicle center up to 7.80 m. Hydraulic side shift by 1.60 m. Changeover from right- to left-hand operation possible. Swivel angle 270°. Standard boom relief and floating position. Flail mower head VMS 1200 with working width 1.20 m. * RSM boom with computer-assisted controls operated via control panel with automated buttons. Ideal for mowing around guide posts, signs, and trees. Reach from vehicle center up to 3.60 m to the side and 3.20 m to the front. Can be switched from right- to left-hand operation. Flail mower head TMK 1300 with working width 1.30 m. Automatic tilt adjustment. * Working width: 1.2 m | 1.3 m. Weight: 2,300 kg. Drive: PTO shaft/vehicle hydraulics. Mounting: Municipal plate size 3 | Municipal plate size 5. Reach: 7.80 m | 3.60 m. Boom swivel angle: 270°. Hydraulic side shift: 1.6 m. PTO shaft speed max. 710 rpm. Vehicle hydraulic requirement: min. 68 l/min at 340 bar. Transport width: 2.5 m. If a new TÜV inspection is required, we will be happy to provide a quote from one of our partner workshops. Our offering is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, without new UVV. You can find more trucks on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the goods to avoid any misconceptions about the condition and suitability. Viewing and inspection are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. We assume no liability for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to prior sale and errors.

Condition: used, mileage: 29,002 km, power: 74 kW (100.61 HP), first registration: 03/2015, fuel type: diesel, empty load weight: 2 kg, maximum load weight: 2,400 kg, overall weight: 5,000 kg, axle configuration: 4x4, wheelbase: 2,500 mm, brakes: other, color: green, driver cabin: other, gearing type: automatic, emission class: euro5, number of seats: 2, loading space length: 2,100 mm, loading space width: 1,400 mm, loading space height: 300 mm, operating hours: 5,802 h, Equipment: additional headlights, all wheel drive, crane, differential lock, onboard computer, power assisted steering, soot filter, trailer coupling, * German vehicle * 1st hand * Condition see photos * Original only 29.002 Km * Only 5,802 operating hours * Three-way tipper with Fassi crane behind the cab * Fassi crane F30CY023 * Lifts to 1.85m = 995 Kg - 3.00m = 810 Kg - 4.10m = 580 Kg - 5.20m = 440 Kg - 6.30m = 335 Kg * Hook height 9 m * 5 + 6 control circuit * 2 hydraulic outriggers * 2 trailer couplings * Trailer load 3500 KG * Tipper dimensions length = 2,100mm - width = 1,400mm - height = 300mm * Dücker UNA 200 flail mower available at extra cost * High front wall * Aluminum loading flaps * Height-adjustable municipal worktop with hydraulic connections * Four-wheel steering * EasyDrive (hydrostatic drive) * Rotary servo * 2 comfort seats * Rear wall window * Sliding window * Roof hatch * Differential lock * Municipal lighting and headlights * Rotating beacons * Wheelbase: 2,500 mm * GVW: 5,000 kg * Unladen weight: 2,600 kg * Payload: 2,400 kg If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at Bledjvhqu Aopfx Aqtei We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and testing of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, mileage: 29,002 km, power: 74 kW (100.61 HP), first registration: 03/2015, fuel type: diesel, empty load weight: 2,600 kg, maximum load weight: 2,400 kg, overall weight: 5,000 kg, axle configuration: 4x4, wheelbase: 2,500 mm, brakes: other, color: green, driver cabin: other, gearing type: automatic, emission class: euro5, number of seats: 2, loading space length: 2,100 mm, loading space width: 1,400 mm, loading space height: 300 mm, operating hours: 5,802 h, Equipment: additional headlights, all wheel drive, crane, differential lock, onboard computer, power assisted steering, soot filter, trailer coupling, * German vehicle * 1st hand * Condition see photos * Original only 29.002 Km * Only 5,802 operating hours * Three-way tipper with Fassi crane behind the cab * Fassi crane F30CY023 * Lifts to 1.85m = 995 Kg - 3.00m = 810 Kg - 4.10m = 580 Kg - 5.20m = 440 Kg - 6.30m = 335 Kg * Hook height 9 m Bjdevhqu Nopfx Aqtoli * 5 + 6 control circuit * 2 hydraulic outriggers * 2 trailer couplings * Trailer load 3500 KG * Tipper dimensions length = 2,100mm - width = 1,400mm - height = 300mm * Dücker UNA 200 flail mower available at extra cost * High front wall * Aluminum loading flaps * Height-adjustable municipal worktop with hydraulic connections * Four-wheel steering * EasyDrive (hydrostatic drive) * Rotary servo * 2 comfort seats * Rear wall window * Sliding window * Roof hatch * Differential lock * Municipal lighting and headlights * Rotating beacons * Wheelbase: 2,500 mm * GVW: 5,000 kg * Unladen weight: 2,600 kg * Payload: 2,400 kg If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, power: 10 kW (13.60 HP), first registration: 09/2013, overall weight: 2,300 kg, color: red, maximum load weight: 5,000 kg, driver cabin: other, gearing type: other, emission class: none, Year of construction: 2013, * German equipment * Condition as shown in the photos * Only 6,426 operating hours * Link to video: ?v=q3Q39J2ZX20 * Dücker MK25 mower combination consists of base unit, RSM mower & DUA800 arm * We will gladly send you a video of the MK25 mower combination * Complete documentation * Dücker MK25 mower combination, year of manufacture 2013 * Mower combination consisting of embankment mower and verge mower on arms. For municipal carrier vehicles and tractors with municipal plate sizes Gr. 3 and 5. Operated via CAN-BUS system using two joysticks, a multicontroller, and a touch display. Usable on both left and right side. Driven by PTO shaft or vehicle hydraulics. Foldable for transport – transport width 2.50 m. * DUA 800 arm with 3-part boom and telescopic section. Reach from vehicle center up to 7.80 m. Hydraulic lateral shift up to 1.60 m. Suitable for right and left operation. Swivel angle 270°. Standard arm relief. Float position. VMS 1200 flail mower head, working width 1.20 m. * RSM arm: Computer-assisted control with automated buttons via control panel. Optimal for mowing around guide posts, signs, and trees. Reach from vehicle center up to 3.60 m sideways and 3.20 m forwards. Conversion between right and left operation possible. TMK 1300 flail mower head, working width 1.30 m. Automatic tilt adjustment. * Working width: 1.2 m | 1.3 m. Weight: 2,300 kg. Drive: PTO shaft/vehicle hydraulics. Attachment: municipal plate size 3 | municipal plate size 5. Reach: 7.80 m | 3.60 m. Arm swivel angle: 270°. Hydraulic lateral shift: 1.6 m. Maximum PTO speed: 710 rpm. Required vehicle hydraulic capacity: minimum 68 l/min at 340 bar. Transport width: 2.5 m. If a new TÜV inspection is required, we will be happy to provide a quote from our partner workshops. Our offer generally DOES NOT include new TÜV inspection, new DGUV, new SP, or new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: Blsdpfx Aoxl Snusqtoi We offer and strongly recommend an inspection and test of the item to avoid any misconceptions about the condition and suitability for the buyer. Viewing and testing are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. No liability is accepted for errors or incorrect information in this offer. The buyer is obliged to independently confirm the condition and features of the equipment/vehicles. Subject to prior sale, changes, and errors.