Used Famup Mmv1600/65 for sale (6,964)

Condition: ready for operation (used), * Brand: Främbs & Freudenberg * Type: Euroclass * Surface: 6500 x 2400 mm – 1 decks * Driving: 18,5 kW E-motor Rcjdpfxoywmn No Almob * incl.: springs

Condition: used, mileage: 634,200 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: automatic, first registration: 10/2013, emission class: euro5, brakes: retarder, number of seats: 11, Equipment: ABS, air conditioning, parking heater, * Our internal number: 1042 * Sprinter 516 * Original EVOBUS City 65 Rcsdpfx Aletqk Hfemob * Automatic transmission * Large passenger compartment - air conditioning * Driver's seat - air conditioning * Auxiliary heater / parking heater * Technical repair history includes: * Torque converter €1,114.78 * Reversing gear €3,900 * Automatic transmission €4,796.33 * Door drive with motor €2,025 * New rear axle air bellows 11/2022 * Headlights * TELMA €5,933.40 * Differential 1,159.52 * DIESEL ENGINE - Exchange €9,114.33 / February 10, 2022 * New front brakes 03/2023 * New front brake discs 05/2022 * New starter 02/2022 * Diesel particulate filter exhaust system 02/2022 * New front and rear engine mounts 02/2022 * New intercooler 02/2022 * New viscous fan 02/2022 * New air conditioning compressor 06/2022 * Intercooler / charge air hose / 10/2022 * etc., ... List of €41,355.17 is available! - * Matrix * Cruise control * Convector heater * Mechanical folding ramp * Driver's compartment protective screen * etc. * All information without guarantee * We reserve the right to sell prior to sale * Please refer to our terms and conditions

Condition: used, mileage: 323,500 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: automatic, first registration: 01/2014, emission class: euro5, color: red, brakes: retarder, number of seats: 15, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * Our internal no.: 1106 * MB 516 Sprinter * VDL body * Mid-City * Lettering - V I N Y L - the vehicle is fully wrapped * Class M3 * Water pump and V-belt / idler pulley replaced new in 02/2024 * Automatic transmission * TELMA RETARDER * Driver's air conditioning * Passenger compartment – A/C * Auxiliary heater / stationary heating Rcedpfxjnp Dhue Almob * Convector heating * Seats: 15 * Standing places: 12 * Vehicle speed approx. 99 km/h * Standing places * Manual folding ramp * Inspection book available * Length: 7.361 m * The vehicle has minor body damages – see pictures * More photos available on request * Front axle tires in good condition. * etc. * All information without guarantee * Subject to prior sale * Please refer to our general terms and conditions

Condition: new, 6.5 mm multi-axis springs and wire forms generator, featuring up to 16 axis, including wire rotation, one motor per slide, OD control and other nice features. The machine is widely used for agriculture double torsion springs, but not only : it can produce an extensive range of torsion, double-torsion, extension springs, as well as wire and strip forms Rcedpfx Alsi Ik Aysmob

Condition: excellent (used), functionality: fully functional, Starlinger Extruder - Screw diameter: 65 mm - Refurbished - Degassing zones - Filter / screen changer Rsdpfx Aehgq Aholmscb - Strand die Data sheet, see photos. Optionally with water bath & strand pelletizer, etc. We are available for any further questions. Commissioning and testing available upon request. In stock

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Kilia 65 l | Meat/Bowl Cutter Manufacturer: KILIA Fleischereimaschinenfabrik Fritz Reimers GmbH u. Co. KG Type: 65 Machine Number: 89413239 Year of Manufacture: 1994 Bowl Capacity: 65 liters Rated Power: 22 kW Rated Current: 51 A Supply Voltage: 400 V Frequency: 50 Hz Current Protection: 63 Amp. slow-blow The Kilia 65 is a professional, compact bowl cutter of German manufacture, designed for use in meat processing plants, artisan butcheries, and industrial kitchens. The device is used for chopping, mixing, and emulsifying meat and vegetable ingredients, making it a key component in the production of fillings for sausages, pâtés, finely ground processed meats, and all types of culinary preparations. Thanks to its powerful 22 kW motor, the cutter easily handles the intensive chopping of even well-chilled or sinewy raw materials. - Advanced bowl drive: The device is equipped with two bowl speed settings and a function to change the direction of rotation (forward and reverse operation), allowing for optimal adjustment of process parameters to the type and structure of the filling being prepared. - Robust construction: The housing and body are made of high-quality materials that are resistant to corrosion and meet the strict sanitary and hygienic standards of the food industry. Rjdpfxjy Tza Ee Almjcb - High efficiency: The optimal ratio of bowl capacity (65 liters) to engine power (22 kW) ensures rapid and precise cutting without overheating the filling. - Durability: Kilia machines from the 1990s are known for their extremely durable mechanics and simple, reliable electrical systems, which facilitate day-to-day operation and maintenance.

Condition: used, Year of construction: 2018, x-travel 620 mm y-travel 520 mm z-travel 460 mm c-axis 360 ° b-axis -50 / +110 ° distance spindle nose and table 170 - 630 mm CNC-control iTNC 640 HEIDENHAIN Table dimensions Ø 650 mm max. table load 500 kg spindle turning speed range 12.000 U/min drive capacity - spindle motor 15,5 / 33,0 kW rapid traverse 48 m/min tool change unit 48 Pos. SK 40 coolant IKZ 30 bar voltage 400 V total power requirement 35 kW weight of the machine ca. 10,0 t dimensions of the machine ca. 4,00 x 2,46 x 2,85 m chip conveyor 2,90 x 0,50 x 1,30 m coolant tank 2,30 x 1,70 x 0,45 m coolant pump 0,60 x 0,50 x 0,90 m Oil cooler 0,55 x 0,60 x 1,10 m Redexap Easpfx Almecb 5-axis simultaneous machining center - Serial-No.: 9496-117 - Control ON: 10,137 h - Spindle ON: 3,380 h - Control: HEIDENHAIN iTNC 640 - electr. handwheel - IKZ 30 bar - chip conveyor

Condition: good (used), face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: WMW ABW, face driver -Type: MS5 Rcjdpfxjrv Avns Almeb -Front dimension: Ø 65 mm -Number: 7x centering tips available -Price: per piece -Recording: see photos -Total dimensions: Ø 74 x 220 mm -Weight: 2.9 kg/piece

Condition: excellent (used), Year of construction: 2015, CNC Lathe Brand: Spinner Model: TC 600-65-SMCY Year of manufacture: 2015 Machine number: AT0805 Operating hours: Distance between centers: 650 mm Center height: 300 mm Swing diameter over bed: 600 mm Swing diameter over cross slide: 400 mm Bar capacity: 65 mm Chuck bore: 66 mm Control: Siemens 840D SolutionLine Speed range: up to 6,000 rpm Rodey Iywxspfx Almecb Equipment: Star turret 16 driven tools C-axis for both spindles Y-axis +50 / -40 mm Extraction unit Connection: approx. 50 kW Dimensions: mm Weight: 5.7 t Condition: very good

Condition: excellent (used), Year of construction: 1999, cutting length 3.200 mm cutting width 3.200 mm cutting hight 65 mm saw blade DM max. 300 mm saw blade motor: 5,5 kW scoring unit DM max. 160 mm motor scoring unit 1,5 kW Rodpfjhvan Iex Almscb front support tables 3 Stk. 1 x 2500 x 500 & 2 x 1500 x 500 mm cutting optimisation program no. of grippers 8 pcs saw blade hight adjustment on THK guides pressure beam with openings side pusher (alignment) saw blade quick change system suction DM1 x 120 & 1 x 150 mm space requirement L x B 5700 x 6000 mm weight approx. 2500 kg INVERTER NEW Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: good (used), Technical condition: good Rjdpfx Asyzh Tnslmecb Visual appearance: good Liebherr GM65 Grab 5 tine new pins new teeth hydraulic tested including rotation motor multiple units available

Condition: good (used), Year of construction: 1984, Eccentric press, single-column press, stamping press, single-column eccentric press, eccentric press, single-column press -Manufacturer: HELMERDING hiw, Single-column eccentric press type ERVL65B -Pressure capacity: 65 tons -Coupling: pneumatic -Drive: 5.0/6.0 kW 1440/2890 rpm -Stroke: adjustable 14 - 90 mm -Table size: 590 x 740 mm -Table cutout: 140 x 240 mm -Protrusion: 310 mm -Punch holder: Ø 40 mm -Insertion height 340 mm -Dimensions: 2070/1050/H2140 mm -Weight: 4430 kg Rsdpsywzh Rsfx Almjcb

Condition: defective spare-parts repository (used), Year of construction: 2005, functionality: not functional, turning length: 600 mm, turning diameter: 140 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 110 mm, travel distance Z-axis: 360 mm, controller model: Siemens 840 D PowerLine, Hydraulic unit, main and counter spindles defective TECHNICAL DETAILS Turning diameter: 140 mm Turning length: 600 mm Distance between spindles: 615 mm Travel X-axis: 110 mm Travel Z-axis: 360 mm Travel Y-axis: 70 mm B-axis: 2x +/-1° Rapid traverse (X / Y / Z-axis): 25 / 12 / 50 m/min Main spindle Max. speed: 5,000 rpm Drive power: 20 / 27 kW Max. torque: 105 / 145 Nm C-axis positioning: 0.001° Chuck diameter: 140 - 160 mm Spindle nose: ISO 702/1 A5 Max. bar diameter: 65 mm Spindle bearing diameter: 110 mm Counter spindle Max. speed: 5,000 rpm Drive power: 20 / 27 kW Max. torque: 105 / 145 Nm C-axis positioning: 0.001° Chuck diameter: 140 - 160 mm Spindle nose: ISO 702/1 A5 Max. bar diameter: 65 mm Travel X-axis: 150 mm Travel Y-axis: 600 mm Spindle bearing diameter: 110 mm Turrets Number: 3 Tool holder: VDI 25 x 48 DIN 69880 Number of tool stations: 3 x 12 Number of live tool stations: 3 x 12 Rcsdeyxgc Nepfx Almsb Max. speed of live tools: 6,000 rpm Drive power for live tools: 8 kW Max. torque: 16 Nm MACHINE DETAILS Total power requirement: 53 kVA Dimensions & Weight Space requirement: 8.0 x 3.5 x 2.5 m Machine weight: 6.5 t EQUIPMENT 2(3) Y-axes +/-35 mm 2 B-correction axes (+/-1°) Chip conveyor Parts catcher Tool breakage monitoring Bar feeder: IRCO Profimat 65.6

Condition: new, neu ca. 12 Wochen ab Auftrags Italien 57900 € 1094.31 € 1 650 mm 0,5 - 170 mm 670 x 2200 mm 4000 m³/h 120 mm 6 bar 78 (+/-2) dB 22 kW 2600 mm 1350 mm 2100 mm 1125 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure. Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Hoods for extraction inside the machine, one per station. Touch screen for -Automatic star-delta connection of the main motors - Analogue ammeter for each group - Digital display for sheet thickness with decimal point tolerance - Material thickness adjustment (+/- 0.1 mm) - Machine condition monitoring with alarm messages FEEDING SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt on request Variable feed speed via frequency converter 0.6 to 6.5 m/min. Rubber conveyor belt, oil and temperature resistant Automatic conveyor belt centring Lateral guides to prevent the belt from lifting off. Rubber pressure rollers in front and behind each station, oil and temperature resistant Idle rollers at the front and rear table INCL. OPTIONALTAMPICO BRUSH SYSTEM FOR CONVEYOR BELT CLEANING Ø 150 MM 1 . WORKING GROUP - R Balanced contact roller Anti-oil and anti-heat Nitrile rubber coating Adjustable via eccentric shaft for working position and compensation of abrasive belt wear Pneumatic cylinder for automatic feed to working position and for lifting in case of emergency stop. Abrasive belts and/or Scotch Brite can be used. Motorised adjustment and electronic control of contact roll height. Variable speed motor with automatic brake in case of emergency. Pneumatic tensioning system for the abrasive belt. Sanding belt centring system, with electronic photocell. Oscillation adjustment in width and time. Diameter of contact roller mm 125 Positioning accuracy of the contact roller adjustment mm +/- 0,02 Grinding belt speed m/sek 3-18 Rcedpfx Ajwiqukelmjb Motor power kW 7,5 2. WORKING GROUP - X 2 rows of vertical brushes, 4 rotating clockwise and 4 counterclockwise. Transverse movement of the entire group (oscillating) Quick change holder for brushes Brush diameter mm 115 Number of brushes No 8 Oscillation stroke mm 15 Rotation motor power kW 2,2 Revs 1/min 1000 Oscillation motor power kW 0,4 Grinding brush speed m/sec 10,0 Optional accessories: B Group - External barrel brush Ø 150 mm with Scotch Brite Brush € 5150,00 with Wire Brush 0,3 mm € 6060,00 R GROUP - GRINDING BELT Motor 11 kW € 740,00 X GROUP - CUP BRUSHES Motor with variable speed 5,5 kW 350/1100 incl.

Condition: good (used), Year of construction: 2013, overall weight: 560 kg, Pump technical data: • Manufacturer: KSB • Type: ETIC D 65 / 45-1 • Capacity: Q = 45 m³/h • Head: H = 182.19 m • Year of manufacture: 2013 • Flange connections (visually DN150 – as shown in photos) • Solid, industrial construction • Pump dismantled from an industrial installation Electric motor: • Manufacturer: Siemens • Power: 37 kW • Supply: 3-phase • Speed: approx. 2950 rpm (50 Hz) • Industrial design, IC411 cooling • Mounting: IM B3 • Motor mounted on frame together with pump Condition: • Technical condition: used • Visually normal signs of use, no cracks or damage to the housing • Shafts and flanges complete (visible in the photos) Rjdpfoydv I Djx Almocb • Sold as a set: pump + motor + frame Additional information: • Ideal for industrial applications: process installations, energy, chemical, process water • Price quoted per unit.

Condition: new, Year of construction: 2026, number of rollers: 3, shaft diameter: 60 mm, overall weight: 1,080 kg, Equipment: documentation/manual, emergency stop, hardened rollers, - Ring bending machine Rodpfx Alegg N Amjmecb - Shaft diameter 60 mm - The two lower rollers are hydraulically driven - Three rollers are driven - 2 digital displays - Brake motor - Can be used horizontally/vertically - Mobile control panel - Emergency stop - Documentation - 400 V

Condition: good (used), Year of construction: 1969, For sale is a veneer press from Ott. The machine is in perfect working condition and can be inspected on site. Sale is on behalf of a customer. Machine location: Friedeburg area. Rcjdpsymmgijfx Almjb Machine details: Pressing area: 225 cm x 120 cm Year of manufacture: 1969 Motor power: 12 kW Includes heating Emergency stop cable The machine has been repainted at some point

Condition: like new (used), Year of construction: 2020, operating hours: 500 h, functionality: fully functional, Bar feeder FMB turbo 5-65 / 3200 "B" Comes from a Mazak Quick Turn 200 MSY Hardly used / Like new / Available immediately List price 2020: 28,000 EUR Rjdpfx Aloyzp Adsmecb

Condition: excellent (used), Year of construction: 2018, operating hours: 16,500 h, functionality: fully functional, machine/vehicle number: 18-4 1023/R1581559, control type: PLC-controlled, bar diameter (min.): 5 mm, bar diameter (max.): 65 mm, type of input current: three-phase, We are selling an FMB TURBO 5-65/3200 "A" type rod feeder. The following sizes of complete nozzle sets are included with the feeder: Rodpfxoy Udd No Almecb D65; D50; D42; D25; D15; The machine can be inspected while in operation until July 25, 2026.

Condition: used, mileage: 260,356 km, power: 368 kW (500.34 HP), first registration: 04/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: blue, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,900 mm, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN TGA 28.500 6x2BL Gergen Roll-off Tipper VIN: M812898 Max. container length: 6.50m Chassis / Attachments: * Leaf/air suspension * 3rd axle lift axle, twin tyres (10t) * Wheelbase: 1-2 = 4,500 mm / 2-3 = 1,350 mm * Tyres: 385/65 R22.5 * Tyre tread depth remaining: axle 1: 70% / axle 2: 10/20% / axle 3: 20% * 1 x diesel tank * 1 x hydraulic tank * 1 x AdBlue tank * Alcoa aluminium rims Body: * Gergen hooklift GRK 21/65 Ion * Roll-off tipper prepped for retractable crane * 2-way hydraulics with quick-release coupling at rear, incl. side oil cooler * 4 mechanical container locks Cab / Driver’s compartment * Flat, long cabin * Roof hatch * Refrigerator * Climate control system * Stationary air conditioning * Auxiliary heater * Hands-free kit * BT, AUX, USB * Distance control * Lane assist * Cruise control * Partial leather seats * Lightfix lamp bar with 4 spotlights * 2 x air horns Engine / Transmission * 368 kW // 12,419 cm³ // Euro 6c Redpfxswnk Dvo Almocb * ZF-AS Tronic / automatic * Engine brake * Differential lock Weights * Gross weight: 26,000 kg * Payload: 13,990 kg * Unladen weight: 12,010 kg Other * German vehicle * 1 previous owner * New roadworthiness certificate (TÜV) available upon request New main inspections / safety inspections or changes to gross vehicle weight (downgrade/upgrade) are available on request. We are pleased to assist you with export/transfer number plates, and vehicle delivery within Germany is also possible. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for printing or typographical errors. Subject to change, prior sale, and errors! ---- Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. With many years of experience in the reconditioning and sales of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge is the sale of new and used commercial vehicles. On our 11,000 m² premises, you’ll find a large selection of vehicles. Our company philosophy is characterised by fairness and integrity. Since customer satisfaction is very important to us, we provide our customers with an excellent all-round service package and assign a competent contact person to guide them through the purchase or sale process. See for yourself! Our services for you: Vehicle loading We are happy to assist you with loading your purchased vehicles. Organising special transports We are happy to assist you with the organisation of special transports. Temporary / Export number plates We are happy to assist you with obtaining export or temporary number plates. Customs clearance We are happy to assist you with customs formalities.

Condition: used, Year of construction: 2017, controller manufacturer: Siemens, controller model: 840Dsl, _____ Description: Year of manuf. : 2017 Control : Siemens 840Dsl Turning diam. : 500 mm Turning length : 800 mm Mainspindle: Technology:Motorspindle Speed:4.000 rpm Power (max.):29 kW Torque (max.):250 Nm Barcapacity:76 mm Subspindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):29 kW Torque (max.):250 Nm Ejector:Pneumatic Movement in Z:800 mm Toolcarrier I (X/Y/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:5.000 rpm, 6,7 kW, 25 Nm Movement in X/Y/Z:260/100/800 mm Eilgang in X/Y/Z:30/12/30 m/min Toolcarrier II (X/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:5.000 rpm, 6,7 kW, 25 Nm Movement in X/Z:210/800 mm Eilgang in X/Z:30 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with paperbeltfilter and High-pressure, 40 bar Rawmaterialfeed I:Robotinterface prepared Rawmaterialfeed II:Barloaderinterface prepared Finishedpartremoval:Workpiece unloading device with conveyor belt Rjdjy A U Izspfx Almocb Oilmistseparation:Interface prepared Toolholder:Misc. static and driven toolholder Further Accessory:Automatic Door, Rinsing pistol

Year of construction: 1998, operating hours: 1,339 h, condition: ready for operation (used), Control Unit Brand FANUC Model Series 18i-T Main Drive Number of axis 4 Spindle Speed 4000 RPM Rcsdpfsx D Itwsx Almjb Tool taper VDI 30 This 4-axis SCHAUBLIN 65 TM-3 was manufactured in 1998. A robust horizontal turning machine, it features a maximum turning diameter of 380mm and a length of 534mm. With a spindle speed and rotating tool speed both up to 4,000 RPM, and a 12-piece turret with driven tools, consider the opportunity to buy this SCHAUBLIN 65 TM-3 horizontal turning machine. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2021, operating hours: 5,400 h, Equipment: all wheel drive, Komatsu D65EX-18E0 (2021) * Engine power: 164 kW * Operating weight: 20,190 kg * Drive: Hydrodynamic (torque converter) * Undercarriage: EX version * with ripper The machine has only 5,400 operating hours and is in like-new condition. Rcedpeytadhefx Almsb

Condition: good (used), Code: 0355 Brand: AVOLA - GERMANY Model: GAMA 65 K - CE Standard Cutting centre for timber joinery, beams, timber roofs, sawmills, balconies, garden furniture and various – CE Standard Technical data: Lower cross-cut saw with rotating table and tilting blade Vidia blade diameter mm 650 Hole 30 Pneumatically operated safety cover Motor 10 Kw Motor speed 3000 rpm Pneumatic clamping cylinders Pneumatic cross-cut device with two-hand control Redpfoy A S Dtex Almjcb Electric blade tilt adjustment 90–30° with flat digital display 5–175° Cutting height at 90° 245 mm Cutting height at 45° 164 mm Cutting height at 30° 113 mm Laser cutting guide Table dimensions mm 1500 x 1500 Work table height mm 1000 Handling brackets for forklift truck Right Roller conveyor mm 3000 x 600 - Support guide 5000 mm Left Roller conveyor mm 3000 x 600 - Support guide 5000 mm Overall dimensions of assembled machine mm 10850 x 2000 x 1700 h Overall dimensions for transport mm 2600 x 2000 x 1700 h + Stacked roller conveyors mm 5000 x 1000 x 2000 h

Condition: excellent (used), REF: MM5767 1 x Adpak Machinery Systems Ltd stainless steel flow wrapper fitted with an ICE Zodiac Hawk thermal transfer printer and a fixed folding box. Model - GSP 65. Rsdpfxsulc Sqe Almjcb Date of manufacture - 2009 approx, refurbished by Midas Motion in 2020. Sealing jaws - 300mm long. Fixed folding box - 40mm wide. Came out of production in 2023, this unit was previously used to individually wrap ice lollies.