Used Ermak Punching Machine for sale (64,692)

Condition: used, Year of construction: 2004, sheet width 1000 mm plate length 2000 mm plate thickness 6 mm Punching capacity 280 kN Control Boschert connected load 18 kVA fuse 3 x 20 A total power requirement 15 kW weight of the machine ca. 11 t dimensions of the machine ca. 4,5 x 2,8 x 2,0 m Multi-tool various stamps / dies Software / Dongle Metalix cncKad V10 Kodpfx Aeyi Hpceqgedl

Condition: used, Single-Column Eccentric Press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture: 1962 Pressing force: 63 tons Throat depth: 260 mm Table size: 630 x 530 mm Table opening: Ø 210 mm Ram area: 315 x 260 mm Adjustable ram stroke: 8–100 mm Ram adjustment: 63 mm Ram shank bore: Ø 40 mm, with clamping piece Installation height: max. 450 mm Strokes per minute: 115 spm Air requirement: min. 4.5 bar Motor power: 4 kW Electrical connection: 380 Volt, 50 Hz Table height above floor: approx. 750 to 900 mm - Electric stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination via WEINGARTEN friction-threaded clutch with TDC safety Kdodpsk S Htxjfx Aqgol - Front crankshaft support bearing - Press table height adjustable via 2 threaded spindles - Manual central lubrication system - Free-standing electrical cabinet - UVV (accident prevention regulations) for manual loading operations Space requirements (L x W x H): 1750 x 1600 x 2430 mm Weight: 4.5 tons In good condition

Condition: refurbished (used), Year of construction: 1985, functionality: fully functional, Completely overhauled BRUDERER high-speed stamping press BSTA125 incl. new press control system Technical data: Tonnage: 1250 kN Kjdpfx Aoy D H H Eeqgodl Tooling opening: 1170 mm Strokes per minute: 100–850 SPM (depending on selected stroke) Adjustable stroke: 16, 19, 26, 35, 43, 51, 58, 64, 70, 75 mm Ram adjustment range: 89 mm Tool installation height: 268–386.5 mm (depending on selected stroke) Bolster plate: 1150 x 1070 mm Ram area: 1040 x 600 mm Strip pass width: 440 mm Base plate opening: 1120 x 350 mm Strip entry height: 80–180 mm Strip feed direction: left to right Feeder: servo feed

Condition: good (used), functionality: fully functional, Year of construction: 2012, For sale: Kdsdpfxjuihvzs Aqgol 1 piece used hole punch Manufacturer: Geka type: Puma 110 2HI Punching force: 110t incl. documentation Dimensions see type plate Machine can be inspected in our warehouse in 09599 Freiberg.

Condition: used, Year of construction: 2005, Finn-Power C5-25 - Sheet Metal Processing Center / Nibbler - Siemens Sinumerik 840 D CNC control - Comprehensive accessory package with approx. 400 tools - Various spare parts included in the scope of delivery - Including machine enclosure - Machine is still operational - Approx. 12,000 operating hours - Year of construction: 2005 Technical Data Capacity: - Max. sheet size (X x Y): 2530 x 1270 mm - Min. sheet size (X x Y): 300 x 100 mm - Max. sheet thickness: 8 mm - Max. sheet weight: 200 kg - X-axis length: 2584 mm (X-42...X2542) - Max. X-axis traversing speed: 90 m/min - Y-axis length: 1317 mm (Y-25...Y1292) - Max. Y-axis traversing speed: 60 m/min Stroke Speeds: - Marking: 3000 strokes/min - Max. number of strokes (1 mm increment): 1100 strokes/min - Hole-to-hole (25 mm increment): 420 strokes/min - Pitch (250 mm increment): 150 strokes/min Punching: - Punching force: 300 kN - Punching stroke: Servo-hydraulic - Stroke depth: Numerically adjustable - Stroke length: Programmable - Stroke speed: Programmable Tools: - Tool stations: 20 Kedpfx Aqjyx Ib Hsgjdl - Max. punch diameter: 89 mm - Tool turret rotation: 23.8 rpm - Tool change time: 1 - 3 s CNC Index Tools: - Number of rotating stations: Standard 2 / max. 10 pcs - Max. punch diameter: 89 mm - Max. tool rotation speed: 166 rpm - Clamps: 2 pneumatic units - NC program memory: 1500 kB Punching accuracy according to LKP Test 7100: - Max. approach accuracy (X/Y-axis): 0.1 mm - Max. hole-to-hole distance deviation (X/Y-axis): ± 0.05 mm - Angle deviation: ± 0.1° Positioning accuracy according to VDI/DGQ 3441: - Positioning deviation Pa (X/Y-axis): ± 0.04 mm - Positioning deviation Ps (X/Y-axis): ± 0.02 mm Installation: - Electrical connection: 80 KVA - Average power consumption: 30 kW - Average compressed air consumption: 2.5 Nl/s - Max. compressed air consumption: 5 Nl/s - Min. compressed air supply: 6 bar - Oil tank capacity: 400 l - Machine weight: 12,000 kg

Condition: ready for operation (used), optionally in combination with an oval riveting machine of the same brand/age; see our other advertisement Kdjdpfx Aqjx Nfhlsgol

Condition: ready for operation (used), In use from 1991 until it was last used and has been little prone to problems despite being a 1990s Chinese punching and riveting machine for oval eyelets. Kdodpox Nd U Dsfx Aqgjl

Year of construction: 1963, condition: used, functionality: limited functionality, machine/vehicle number: 512804, 1963 Bobst SP900E with double action stripper in reasonable/good condition. Kdedpfx Aqstyqizegsl Well-maintained.. in recent years for example sprocket wheels, main gripper chains, counterplate under cuttingplate, cardan joints to the feeding head, have been renewed (original Bobst parts) Gripperbars have not been renewed recently, they are still in quite a good condition. The knee joints have almost no signs of wear. they were probably at some point and the machine has not been used much since then. There is hardly any screech on them. Machine is dismantled in our storage in the South of The Netherlands, dismantled and not under power. For seriously interested potential buyers we will further upgrade the machine and assemble it and give the possibility to test it inevery way they want. In that case price will be 22,000 euros, loaded on to your transport, EX SITE

Condition: good (used), Year of construction: 2009, operating hours: 899 h, machine/vehicle number: SN20090545, punching force: 30 t, sheet thickness (max.): 6 mm, table length: 2,000 mm, table width: 1,270 mm, overall weight: 11,000 kg, working range: 40 mm, ERMAK RPP 1270x30 Ton Punching Machine, Year 2009 Brand: Ermak Model: RPP 1270x30 Serial Number: SN20090545 Year: 2009 Main Features: Operating Hours: - POWER ON Hours: 899 hours - Punching Hours: 1 hour 6 minutes Kodjv S Ufyopfx Aqgodl - Punching Force: 30 tons - Maximum Capacity: - Sheet Thickness: 6 mm - Sheet Dimensions: 1270 mm (width) x 2000 mm (length) - Travel: 40 mm - Axis Travels: - X-axis: 2000 mm - Y-axis: 1270 mm - Travel speed: - X-axis: 70 m/min. - Y-axis: 70 m/min. - C-axis speed: 100 rpm. - Strokes per minute: Up to 700. - Accuracy: - Positioning: ±0.03 mm - Position tolerance: ±0.1 mm - Numerical control (CNC): GE Fanuc 18i-PB - Oil capacity: 300 liters. - Power: 15 kW - Machine dimensions: - Length: 4250 mm. - Width: 4000 mm. - Height: 2330 mm. - Weight: 11,000 kg.

Condition: used, total height: 5,100 mm, total width: 2,600 mm, pressing force: 65 t, For sale: Schuler toggle drawing press Kedpfowab T Eox Aqgsdl PK No. 630

Year of construction: 1992, condition: ready for operation (used), functionality: fully functional, overall weight: 7,000 kg, punching force: 20 t, table length: 2,450 mm, table width: 1,200 mm, machine/vehicle number: 24550616, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates timely collection, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Punching force: 200 kN Table dimensions: 2,450 x 1,200 mm MACHINE DETAILS Connected load: 11 kVA Dimensions & Weight Dimensions (L x W x H): 3,000 x 3,000 x 1,900 mm Kjdpsym Nlzefx Aqgedl Weight: 7,000 kg EQUIPMENT Various punches Punching tool External reference: CES - Lot 107

Condition: used, Year of construction: 2015, Working hours machine: 31888 (17.01.2024) h Working hours laser on: 19090 (17.01.2024) h Working hours beam on: 6475 (17.01.2024) h Laser power: 4000 Watt Max. punching force: 300 kN Control: AMNC 3i Working range laser: 2500 x 1170 mm Working range punching: 3050 x 1525 mm Length: 7870 mm Width: 5880 mm Height: 2666 mm Electrical connected load: 85 kVA x-axis: 100 m / min y-axis: 80 m / min Weight of machine approx.: 30000 kg Standard configuration - Patented servo-electric double drive- Punching force 300 kN- 32 tool stations (4 rotatable stations)- max stroke rate: 400- max material thickness 6mm- Automatic focus adjustment- Automatic gas pressure control- HS sensor cutting head- Nozzle cleaning- Splash guard- Good parts flap Ksdpfx Aqsypt R Hegsdl Extended machine accessories - TSU tool changer 300 Automation

Condition: used, 5-fold combined profile steel shears PEDDINGHAUS type 210 AD/13 Machine. No. 529A059 Year of manufacture approx. 1970 Punching machine: Kdedpfji Duh Ijx Aqgsl Punching force 60 ton. Punch stroke 25.5 mm Punching capacity Ø 25 mm in 16 mm sheet metal Ø 20 mm in 19 mm sheet metal throat depth 365 mm Bar steel shears: Cutting capacity Round 42 mm Square 38 x 38 mm Flat steel shears: Cutting capacity with shearing angle 5° 150 x 13 mm or 200 x 10 mm Blade length 245 mm Profile steel shears: Shearing capacity angle steel at 90° 110 x 10 mm Shearing capacity angle steel at 45° 90 x 9 mm T-steel 110 x 10 mm Notching device: Rectangular notcher up to 12 mm sheet metal Punch dimensions 85 x 50 mm Motor power 3 kW Mains connection 380 Volt, 50 Hz. - Center punch detection device via hand lever and centering device - Mechanical stroke release via hand lever - Flat steel shears equipped with 2° blade - Mechanical hold-down device on the profile steel shears, bar steel shears and flat steel shears Space requirement L x W x H 1500 x 800 x 1900 mm Weight 2000 kg good condition

Condition: used, Pneumatic press, compressed air press BOSCH type Manufacturer no.: Year of manufacture: 1980 Pressing force: 18 kN = 1.8 t at 5 bar 15 kN = 1.5 t at 4 bar 12 kN = 1.2 t at 3 bar 8 kN = 0.8 t at 2 bar 6 kN = 0.6 t at 1.8 bar Throat depth: 100 mm Ram stroke: 70 mm Kdedsh U Dtuspfx Aqgol Table size: 245 x 200 mm Ram face: Ø 45 mm Max. installation height: 235 mm Clamping pin bore: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force infinitely adjustable via pressure regulator - Pneumatic cylinder with ram adjustable in height by 90 mm - Pneumatic dual-hand control - Mounted on a metal frame with wooden boards Required floor space (L x W x H): 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight including table frame: 140 kg In very good condition

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 66,465 h, machine/vehicle number: P5.04.01.41, Rated voltage: 3PH x 400V 1PH x 230V Rated current: 3PH x 45A 1PH x 6A Frequency: 50Hz Kedpoykr Rnefx Aqgsdl Switching capacity: 40kA Cutting gases: Nitrogen & Oxygen Machine dimensions: 3250 x 5000mm Table dimensions: 1610 x 3000mm External additional components: Ytterbium Laser System -> YLS-4000-Cut Cosmotec cooling unit Exhaust system Descaling unit Available spare parts: Various filters & nozzles

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, operating hours: 55,582 h, machine/vehicle number: A0110A0058, controller model: BOSCH PNC-P, laser power: 2,000 W, number of slots in tool magazine: 21, TECHNICAL DETAILS Working area: 2500 x 1250 mm Max. sheet thickness: 4.0 mm Max. punching force: 165 kN Max. active stripper force: 9 kN Max. workpiece weight: 120 kg Max. part chute size: 300 x 500 mm Speeds X-axis: 90 m/min Y-axis: 60 m/min Simultaneous (X and Y): 108 m/min C-axis punching: 60 rpm C-axis thread forming: 180 rpm Max. punching strokes (F=1 mm): 600 strokes/min Max. marking strokes: 1300 strokes/min Tools Number of tool and clamp stations: 21 Tool change time Single tool: 4.4 s Multitool: 2.2 s Laser Data Guaranteed maximum output: 2000 W Laser model: TCF1 Power distribution: TEM∞ Beam quality² K (M²): 0.9 (1.1) Laser gas (CO₂, N₂, He, Xe, CO) consumption for cutting gas⁴: max. 1 cylinder premix gas p.a. Laser cutting head lens size: 5" MACHINE DETAILS Control model: BOSCH PNC-P Laser system switch-on hours: 25,582 h Electrical consumption (laser unit): 65 kVA EQUIPMENT Sturdy C-frame Coordinate guidance with integrated linear scale 2 workpiece clamps Maintenance-free three-phase servomotors Brush tables HI-LAS high-pressure cutting High-speed processing with SprintLas Programmable scan feed Quick-change cutting head system APC capacitive height control Lens monitoring sensors Laser logbook function Kdsdpfxeyv Ddrj Aqgel Compact nesting table Rotating tool holder Automatic repositioning with stripper Automatic part chute Sliding part container Spray lubrication for punch 2 lubricant containers Slug extraction Chip bin Hydraulic quick shut-off External control panel 15" TFT touchscreen color display USB stick interface 3.5" floppy disk drive Safety devices RJ45 network connection Network integration Comprehensive operating manual Remote diagnostics facility SPECIAL EQUIPMENT Thread forming function Softpunch function Vertically adjustable clamp Repositioning cylinder Vibration-damped installation Sensor for part chute Spray lubrication for die Brush-type loading/unloading assistance Note: The machine has already been dismantled (by a certified TRUMPF used machinery partner) and is ready for shipment.

Condition: excellent (used), Year of construction: 1968, functionality: fully functional, machine/vehicle number: 32250, Size 64 x 90 cm, for diecutting only, excellent condition Machine no.: SBDS32250 Kedpew Inz Dsfx Aqgjdl

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, actuation type: hydraulic, punching force: 80 t, punching diameter: 32 mm, sheet thickness (max.): 20 mm, oil tank capacity: 70 l, overall weight: 2,600 kg, type of input current: three-phase, Equipment: foot remote control, Combined Punching and Shearing Machine Tagliaferri FICEP MOD. 805N. Hydraulic. Twin-cylinder. Used, CE certified. Year of manufacture: 2000. In perfect working condition. Punching force: 800 kN. Punch stroke length: 0 to 40 mm. Maximum punch diameter: 32 mm. Maximum thickness: 20 mm. Round bar cutting: diameter 45 mm. Square bar cutting: 45 mm. Angle bar cutting at 90°: 130x130x14 mm. Angle bar cutting at 45°: 80x80x8 mm. SHEAR FOR FLATS: Blade length: 460 mm. Flat 450x15 mm. Flat 350x18 mm. Flat 200x21 mm. Flat 100x25 mm. At 45°: 100x100x16 mm. RECTANGULAR NOTCHER: Flats: 13 mm. Notcher width: 50 mm. Notching depth: 100 mm. Flats: 10 mm. Notcher width: 127 mm. Notching depth: 63.5 mm. Working height: 955 mm. Kjdpfxoywtx Io Aqgjdl Approximate weight: 2,500 kg. Motor power: 7.5 kW. The machine is supplied with various punches.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, Serial number: 134361 Year of manufacture: 2012 Kdodpfx Aoyyk Uroqgjl Control: Fanuc series 160 I PB Max. sheet size: 3000 x 1500 mm Machine weight: 15,100 kg

Condition: good (used), Year of construction: 1992, Hydr.hole punching machine make häwa year 1992 working pressure.400bar with electric height adjustable supporting table Kdjdegbk R Uepfx Aqgsl Machine ready for use .

Condition: excellent (used), Year of construction: 1976, Iberica LM55 Kdsdpsyzgr Njfx Aqgsl year 1976 format 100×70 B1

Condition: used, Year of construction: 1990, serial number 28043 weight 3 t Kedpfxspxri Hj Aqgedl pressure 30 t volt 380 V frequency 50 Hz

Condition: ready for operation (used), Year of construction: 2000, operating hours: 34,744 h, functionality: fully functional, machine/vehicle number: 258 032, overall weight: 11,500 kg, punching force: 20 t, positioning accuracy: 0.07 mm, tool diameter: 89 mm, TECHNICAL DETAILS Machine capacity: 196 kN (20 t) Air pressure: 5 bar Air consumption: 250 Nl/min Oil capacity: 160 l Turret speed: 25 rpm Travel Ranges Machine travel range without repositioning: 1,250 mm x 2,000 mm Machine travel range with 1 repositioning: 1,250 mm x 4,000 mm Machine travel range with 1 repositioning and 1 turning: Turning not possible Processing Max. sheet thickness with ball table: 6 mm Max. sheet thickness with brush table: 3 mm Max. table load: 100 kg Precision Punching accuracy (in standard mode): ±0.1 mm Positioning accuracy (repeatability): ±0.07 mm Control and Axes Pneumatic clamping devices: 2 Number of simultaneously controlled axes: 3 (X, Y, C) Performance Strokes per minute, feed 25.4 mm: X320 / Y250 Nibbling work cycle, feed 1 mm: X920 / Y920 Tooling Minimum programmable increment: 0.01 mm Number of tools: 31 Max. tool diameter: 88.9 mm Amadex stations: 2 x 11 1/4" + 1 x 2" MACHINE DETAILS Connected load: 30 kVA Operating hours: 53,497 h Cutting hours: 37,808 h Dimensions & Weight Kjdeyn Nybepfx Aqgjdl Dimensions (L x W x H): 4,890 x 4,370 x 2,137 mm Machine weight: 11,500 kg Note: No tools included, special transport required.

Condition: refurbished (used), Year of construction: 2004, operating hours: 5,000 h, functionality: fully functional, total height: 4,300 mm, ram adjustment: 100 mm, installation height: 500 mm, table height: 1,000 mm, total width: 2,200 mm, table length: 1,400 mm, pressing force: 200 t, control cabinet width: 2,000 mm, stroke length: 160 mm, clearance between the columns: 1,450 mm, working width: 1,100 mm, distance between side stands: 400 mm, overall weight: 27,000 kg, height adjustment type: electric, space requirement height: 4,500 mm, space requirement length: 2,200 mm, space requirement width: 1,800 mm, High-precision cutting and embossing press, U.T accuracy +/- 0.01, ideal for the production of fuel cell stacks or hydrogen electrolyzers. Kdedpfet Nf Agjx Aqgsl hydrogen electrolyzers. The press is also suitable for (smooth) fineblanking, stroke rate 1 - 70 /min. Eccentric loads are also possible without any problems thanks to 4 connecting rod rams. It is also not possible for the press to jam. The press is completely overhauled and supplied with a new Siemens S7 control system.

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 1210496, type of input current: three-phase, total height: 1,260 mm, total width: 441 mm, total length: 852 mm, input voltage: 400 V, type of cooling: water, welding power (max.): 35 kVA, Equipment: documentation/manual, We offer this used medium-duty PEI POINT BSP 136 INVERTER rocker arm spot welder FR, year of manufacture 2012. Kodpfx Aoy Eyipsqgsdl Manufacturer: PEI POINT Model: BSP 136 INVERTER Year of manufacture: 2012 Condition: used Category Id: 905 Type Id: 1918 Type: MEDIUM-DUTY ROCKER ARM SPOT WELDER FR If you have any questions or require further information, please do not hesitate to send us a message or call us.