Used Dry Runner for sale (2,786)

Condition: used, Trolley 12 levels - year of construction unknown - min. part length 320 mm - max. part height approx. 90 mm - number of levels 12 pcs. - distance between levels 100 mm - insertion depth of levels 650 mm - Upright stands 300-450-450-300mm, 5 pcs. - Total height 1.740 mm Lasdpewbtvuofx Afkef - Total width 1.540 mm

Condition: used, - Manufacturer: Venjakob Lasdpfx Aoy Ragfjfksf - Model: VEN DRY DTK 040 - Used machine - Working width: 1,300 mm - Working height: 880 ± 20 mm - Max. part height ~ 80 mm (more available as an option) - Length of nozzle drying channel 6,000 mm - Air velocity 25 m/s - Max. recirculating air flow rate 7,400 m³/h - Min. supply air 900 m³/h - Min. exhaust air flow rate 900 m³/h - Max. drying temperature ~ 50 degrees - Heating capacity 57.2 kW - Air velocity max. 23 m/s - With heat exchanger, heating water PWW 90/70°C - Belt conveyor 6,500 mm - Feed speed continuously adjustable approx. 3.0 - 7.0 m/min - Location: Blomberg warehouse - Voltage, Hz: 400 / 50 - Electrical connection: 10 kW (4.6 + 1.5 kW) - Voltage fluctuations: max. +/- 5% - Without control valves and water pumps

Condition: used, Year of construction: 2013, machine/vehicle number: A1312006-0030, - Manufacturer Venjakob - Type VEN DRY OIR 38/40 - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm - Length of exhaust duct 3,800 mm - Supply air capacity 100 m³/h - Exhaust air capacity ~ 500- 1000 m³/h - Recirculated air capacity ~ 3,000 m³/h - Max. Drying temperature ~ 30 degrees - Air velocity 0.5 - 2 m/s - IR emitters 12 pcs. - IR heater output 12 x 1.5 kW - Belt conveyor, length 4.000 mm - Location, at the warehouse - El. Power 20KW / 63A - Volt, Hz 400/50 - Voltage fluctuations max. +/- 5 % - Control cabinet with touch screen display Lodpfxoxfkbae Afkjaf

Condition: used, Year of construction: 2007, with light barriers in the inlet area, the dryer only switches Lajdpfxsu S N R Ee Afkef on when parts are detected by the light barrier, otherwise the dryer is in energy-savingstandby mode with almost closed mirror halves. Operation via a Siemens panel. - Manufacturer: Venjakob - Type: VEN DRY UV 3D - Year of manufacture: 2007 - Operating side: right - Working width: 1.300mm - Max. Part height: approx. 100mm - Number of tubes: 2 pieces - Suitable for mercury and gallium tubes - 3D for edge drying - Tube power max. 120W/cm - Tube power infinitely adjustable 50-120Watt/cm - With standby mode- With belt conveyor - Feed rate: ~ 2.5 - 7.5m/min. - Length: 3,000mm - Bretie: 2.750mm - Total connection ~45KW - Location: in stock - Volt/HZ: 400/50

Condition: new, Year of construction: 2018, functionality: fully functional, working width: 1,000 mm, area performance: 3,600 m²/h, overall weight: 584 kg, tank capacity: 160 l, total height: 1,380 mm, total width: 1,100 mm, total length: 1,850 mm, water tank capacity: 150 l, operating speed: 6 mm/s, battery voltage: 36 V, gradeability: 16 %, noise level: 59 dB, empty load weight: 296 kg, TECHNICAL SPECIFICATIONS FEATURES Working width (cleaning) mm 1000 Working width (vacuuming) mm 1300 Laodszpyi Iepfx Afkof Area performance/hour (theoretical - practical) m²/h 6,000 - 3,600 Power supply Battery 36V Power consumption W 2650 Drive Front and rear wheel drive IP rating IPX3 BATTERIES Type Gel battery pack (6 units) 6 V 240 Ah () Battery life h - min 5 h Battery compartment dimensions x quantity mm x no. 540x295x380 x2 BRUSHES Diameter - Pad x quantity mm - inch x no. 508 - 20” x 2 Motor power x quantity W x no. 500 x 2 Motor speed rpm 170/140 Weight (head) - specific pressure Kg - g /cm² 65;79;101 / 24;29:37 TRACTION DRIVE Motor power W 600 Maximum travel speed Km/h 6 Climbing ability at full load % 16 VACUUMING Motor power W 600 Vacuum (water column) mbar/mmH2O 165 / 1,700 Air flow rate l/s 32 Noise level dB(A) 67/59* TANK Type Double tank Capacity (cleaning solution) l 150 Capacity (dirty water tank) l 160 Weight (without/with batteries) Kg 296/584 Dimensions (L x W x H) mm 1850x1100x1380

Condition: excellent (used), Here we offer a Busch dry scroll vacuum pump. Ledezgbvdepfx Afkjaf Busch dry scroll vacuum pump Type: FO 0030 B 0110..ZZ Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Heraeus Type: VT 6025 Heraeus Vacutherm vacuum drying oven Specification: Heating jacket VT 6025 Temperature (metric): 200 °C Internal dimensions (W x D x H): 300 x 307 x 275 mm External dimensions (W x D x H): 480 x 450 x 600 mm Electrical requirements: 230 V, 50/60 Hz Frequency: 50/60 Hz Capacity (metric): 25 l Heating jacket type: without inert gas connection Voltage: 230 V, 1.3 kW, 5.9 A Weight: 58 kg Condition: used Scope of delivery: (See image) Lasdpszgbq Isfx Afkjf (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Heraeus Type: VT 6025 Heraeus Vacutherm vacuum drying oven Specification: Heating jacket VT 6025 Temperature (metric): 200 °C Internal dimensions (W x D x H): 300 x 307 x 275 mm External dimensions (W x D x H): 480 x 450 x 600 mm Electrical requirements: 230 V, 50/60 Hz Frequency: 50/60 Hz Capacity (metric): 25 l Heating jacket type: without inert gas connection Voltage: 230 V, 1.3 kW, 5.9 A Weight: 58 kg Condition: used Scope of delivery: (See image) Ljdpszgbqzefx Afkoaf (Subject to changes and errors in the technical data and specifications!) We would be happy to answer any further questions you may have by telephone.

Condition: ready for operation (used), Koller Roller Mill,Roller mill, Roller Pan mill, Pan mill,Pan mixer, Used Machinery Ledpsuh Rkxefx Afkoaf Model: Gebrüder Netzsch 205 ST; 251283 Dimensions: 1400 x 1300 mm Weight: 735 kg Year: 1965 Electrical Data: 400 V; 50 Hz; 4/2.9 A Stone Size: 500 x 150 mm Koller mills are designed to ensure excellent grinding quality for all industrial applications. Whether it’s for minerals, cereals, or food products, Koller mills provide reliability and durability. Choose Koller mills to experience outstanding performance and long-lasting reliability!

Condition: excellent (used), Thermo Scientific Heratherm OMH180 Convection Drying Oven Manufacturer: Thermo Scientific Type: Heratherm OMH180 Machine Type: Convection Drying Oven / Laboratory Oven Internal Volume: approx. 180 liters Max. Temperature: 330 °C For sale is a used convection drying oven from the manufacturer Thermo Scientific. The device is suitable for laboratory applications, research, quality assurance, as well as material and sample drying. Technical Data Max. Temperature: 330 °C Laodpfezfzcbox Afkof Internal Volume: approx. 180 liters Convection Operation: Yes Interior: Stainless steel Digital Temperature Control Power Connection: 230 V Frequency: 50 / 60 Hz Rated Current: 13.3 A Power Consumption: 3.06 kW Protection Class: IP20 Dimensions approx.: 620 x 630 x 800 mm (W x D x H) Weight approx.: 75 kg Equipment Digital Control Convection System Stainless Steel Interior 2 Insertion Grids Exhaust Connection Documentation available Work performed Scope of Supply Thermo Scientific Heratherm OMH180 2 Insertion Grids Documentation as shown in the pictures Condition Used Functional Optical condition as shown in the pictures Inspection possible by appointment Availability: by arrangement. Scope of supply as shown in the pictures. Subject to changes and errors in the technical data, as well as prior sale.

Condition: excellent (used), Edwards Dry Pump We are offering an Edwards dry pump for sale. Boost speed m³/h – 1800 Lasdpfxozfy N Ho Afkjf Forepump speed m³/h – 400 with intercooler Connection: 380-460V 3-phase 50/60 Hz Weight kg: 750 Type: iF30k NRC322000R Condition: used (Subject to changes and errors in the technical data and specifications!) We would be happy to answer any further questions you may have by phone.

Condition: excellent (used), functionality: fully functional, Feller hot runner controller, 70-channel. Prepared for expansion to 80 channels! In excellent condition, sourced from a cleanroom injection molding facility in the medical technology sector. Laedpszdu Hqsfx Afkef The original new price was over €20,000.

Condition: used, Year of construction: 2007, Professional combined painting and drying system with partition wall from Sehon, featuring a large cabin capacity and PLC control. Manufacturer: Sehon Innovative Painting Systems and Technology Model: SE-Professional Futura Year of manufacture: 2007 System type: Combined painting and drying system Cabin internal dimensions: 14,000 x 5,000 x 4,400 mm Cabin external height: approx. 4,900 mm Inlet/outlet gates: 2 units, front and rear Gate opening: 4,000 mm high x 4,500 mm wide Gate construction: insulated steel sandwich panel Gate panel thickness: 54 mm Housing: mineral wool-insulated steel cassettes Cassette thickness: 50 mm Housing color: RAL 9010 Pure White Material: chromated steel sheet Control: Siemens C7 PLC control Laodpsy Tiaasfx Afkjf Operation: Soft-touch panel with touch display Operating modes: Painting, drying, manual operation, timer operation Temperature control: stepless, microprocessor-controlled Filter monitoring: ceiling filter, pre-filter, paint separation mat Operating hour counter: integrated Alarm messages: visual and audible Pressure control: semi-automatic Supply air motor power: 7.5 kW Exhaust air motor power: 7.5 kW Motor power supply: 4 x 400 Volt Total connected load: approx. 37 kW Supply air unit: high-pressure radial fan Exhaust air unit: high-pressure radial fan Airflow rate control: adjustable motor slide Filter system: pocket filters on sliding rails Pre-filter efficiency class: EU3 Fresh air duct: galvanized steel sheet Exhaust air duct: galvanized steel sheet Fresh air duct height: approx. 6 m above floor level Exhaust air duct height: approx. 10 m above floor level Solvent pipe: available Hot air generator: indirect oil or gas firing Combustion chamber material: chromium steel V4A Combustion chamber material numbers: 1.4828 / 1.4541 Burner system: 4-pass system Oil burner: Elco-Klöckner Vectron L04.480 Duo Oil burner power range: 110 - 350 kW Gas burner: Elco-Klöckner EK04.34 G-ZVT1+QS Gas burner power range: 90 - 330 kW Gas burner design: Low-NOx with Quick-Start Type QS93 Solenoid valve: 1/2 inch Safety functions: safety and after-run thermostat Cabin construction: heat and sound insulated Condition: used Further painting equipment available upon request. System currently still in operation, available from June 2026.

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 4,229 h, load capacity: 2,500 kg, lifting height: 5,000 mm, free lift: 1,700 mm, fuel type: electric, mast type: triplex, construction height: 2,395 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 Mast type: Triplex Condition: Not operational Technical condition: normal Front tire type: Superelastic Lsdozt T A Nspfx Afkoaf Rear tire type: Superelastic Battery voltage: 80V Battery capacity: 620Ah Battery year of manufacture: 2022 Description: NOT ROADWORTHY!!! NEEDS REPAIR!!! 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, full free lift.

Condition: excellent (used), Storage location number: Manufacturer: KOCH Year of manufacture: 2014 Type: CKT 300 Equipment number: 4634 Temperature range: up to 150°C Pressure: bar Granulate container: 1 x 60 liters, 1 x 100 liters, 2 x 150 liters, Distribution station Control system for drying Control system for distribution Lasdjzqy Exjpfx Afkef Equipment: stationary Note: like new condition Connection: 30 kW

Condition: used, New spare parts for DEMAG DKUN5 - DKUN 5 (KMK71) Spare parts for the repair of a DEMAG crane, chain hoist Suitable for DEMAG chain hoist DKUN5 Scope of delivery: 1x Shaft-coupling-KMK set 1x Stand set KMK / P = 12600633 1x Runner set KM71 B2 = 12845833 1x Fan set KM71 = 12882233 1x Driving dog KM71 = 12876033 1x Thrust ring set KM71 = 12885233 1x Bearing shield set KMP 71 BS = 12861433 1x Chain guide set LDKUN D5 = 83628033 1x Small parts set KMK 71 B2 = 12878533 Weight 11.5 kg Laedpfxszinw Tj Afksf G

Year of construction: 2022, operating hours: 2,000 h, condition: like new (used), functionality: fully functional, We offer this like-new Ulmatec filter unit, model FES 20-35-4, for dry dust extraction of aluminum/plastic, manufactured in 2022. Manufacturer: Ulmatec Model: Filter unit FES 20-35-4 Lasdjzlr Dcjpfx Afkjf Year of manufacture: 2022 Condition: like new Type: Dry dust extraction for aluminum/plastic Category No.: 376 If you have any questions or require further information, please send us a message or call us.

Condition: used, machine/vehicle number: 008430, Position 1: Panel Feeding and Loading MAHROS + STEFANI-RUNNER + EVOLUTION Position 2: Double Sided Squaring/Edgebanding Machines MAHROS + STEFANI-RUNNER + EVOLUTION Position 3: Panel Stacking and Offloading MAHROS + STEFANI-RUNNER + EVOLUTION Laedpfx Afoyqxx Sjksf

Condition: good (used), functionality: fully functional, The hot runner system DPK 15 from Günther is for sale. The system has been checked for functionality by the manufacturer. The following inspections were carried out: Visual inspection, inside and outside Lasdpfxozl R R Ue Afkef Update from V1.56 to V1.6.7 Temperature calibration Testing according to DIN VDE 0701 Both cables, STL/0/15 and TVK/3/15, are in good technical condition and correctly wired.

Condition: excellent (used), Heraeus Heating and Drying Cabinet We offer a Heraeus heating and drying cabinet here. Heraeus Heating and Drying Cabinet Up to 250°C Manufacturer / Type: Heraeus UT 6060 Features: Laedpszd Uydefx Afkjf Temperature range: 250°C Net volume: 52 liters Weight (empty): 53 kg Internal dimensions: Depth 403 mm, Width 340 mm, Height 380 mm External dimensions: Depth 744 mm, Width 535 mm, Height 552 mm Rated voltage: 230V, 50/60Hz Rated current: 6.8 A, Rated power: 1.50 kW Type: UT 66060 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Die Schmedt PRÄDRY ist ein verlängerbarer Trockner für klebegebundene Buchblocks.  The Schmedt PRÄDRY is an extendable dryer for perfect-bound book blocks. Ledpfx Asxp H S Aofksaf Infrarot-Trockengerät / Infrared drying device Schmedt PräDry HHS 12 Die PRÄDRY ist ein verlängerbarer Trockner für klebegebundene Buchblocks.  Ein dreistufiger Infrarotstrahler (650, 850 und 1.500 Watt) sorgt für eine  schonende und schnelle Trocknung.  Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Here, we offer a Mytron drying cabinet. The WT 850 drying cabinet is used for the simultaneous drying of multiple products or auxiliary devices in the semiconductor industry. Due to its robust design (box-profile frame construction) and the use of stainless steel for the heating chamber, the WT 850 drying cabinet can be used in a variety of applications. The rolling trolley allows for easy loading and unloading of the WT 850 drying cabinet. An exhaust nozzle with an adjustable damper allows the cabinet to be connected to a central extraction system. Technical data: External dimensions: Width 1145 mm x Height 1880 mm x Depth 1810 mm Dimensions of the heating chamber: Width 850 mm x Height 690 mm x Depth 1410 mm Laodozd R Tmjpfx Afkjf Volume of the heating chamber: approx. 830 liters Weight: approx. 230 kg, trolley 50 kg Temperature range: 10°C above ambient temperature to +120°C Spatial temperature consistency: ± 1°C Temporal temperature consistency: ± 1°C Mains connection: 3NPE AC 50 Hz 400 V, 16 A CEE plug Power consumption: 4.5 kVA Fuse rating: 3 x 16 A, 1 x 6 A Control: Digital controller Safety device: adjustable over-temperature protection Pass-through opening: Exhaust nozzle 100 mm with adjustable damper at the top Intake nozzle 100 mm with adjustable damper at the top Type: WT 850 Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Heraeus Heated and Forced-Air Drying Cabinet Here we offer a Heraeus heated and forced-air drying cabinet. Heraeus heated and forced-air drying cabinet, up to 300°C Manufacturer / Type: Heraeus UT 6060 Features: Temperature range: 300°C Net volume: 52 liters Weight (empty): 53 kg Internal dimensions: Depth 403 mm, Width 340 mm, Height 380 mm External dimensions: Depth 744 mm, Width 535 mm, Height 552 mm Rated voltage 230V, rated frequency 50/60Hz, rated current 6.8A, rated power 1.50kW Includes 2 inserts Type: UT 66060 Condition: used Laodpfx Afozd Rwrsksf Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We would be happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 2012, - Manufacturer Venjakob - Year of construction 2012 - Working width 1.300mm - Type. Flash off dryer, VEN DRY Flash Off Lodjzf N Ilepfx Afkeaf - Part height max. approx. 120mm - Zone1, paint calming zone with cover hood without air 3,000+300mm - Zone2, flash off zone 10,000mm - Laminar flow dryer in the opposite direction to the parts - Supply air 4,000m³/h - Exhaust air 4.000m³/h - Air volumes adjustable via flaps - Heat output approx. 65 kW - Air speed 2-5m/s - Max. Drying temperature 30°C - Heat exchanger, heating water PWW max. 90/70 degrees - Belt conveyor, length 13,800 mm - Feed speed approx. 2-10m/min, Frequency converter required on site. - Volt, Hz 400 / 50 - Motor power 2.5+1.5+0.75KW - Without switch cabinet - Location, at the Blomberg warehouse

Condition: like new (used), Year of construction: 2026, operating hours: 5 h, functionality: fully functional, pressure: 12 bar, operating pressure: 12 bar, We offer this new Cryonomic Cob 71r cryogenic cleaning unit + abrasive set, manufactured in 2026. For sale: CRYONOMIC COB71R cryogenic cleaning machine, equipped with an abrasive module, in near-new condition. The machine has only been used for 5 hours and is still in excellent cosmetic and working condition. The COB71R is a high-performance, professional cryogenic cleaning machine, equipped with a remote control integrated into the gun, allowing direct adjustment of the dry ice flow rate, air pressure, and lighting. Thanks to its 30 kg hopper and a working pressure of up to 12 bar, it is perfectly suited for industrial cleaning, maintenance, restoration, stripping, and surface preparation. The abrasive module also allows for more demanding stripping operations (rust, paint, graffiti, etc.). Included equipment: Laodpfx Aeziiy Asfkef CRYONOMIC COB71R machine Original abrasive module Gun with remote control Original hose and accessory set Documentation and invoice (if available) Condition: Only 5 hours of use Impeccable operation Machine ready for work Reason for sale: This machine was purchased to develop a new business activity, but it ultimately does not align with my field of activity. This is the sole reason for the sale. Additional photos can be provided upon request. Price: to be determined / negotiable. Purchase price: €35,828.1 (including VAT).