Used Complete Grape Reception Line for sale (20,517)

Condition: used, Used bottling line Cortellazzi for CSD in PET bottles – 8000 bph General overview of the line The used Cortellazzi bottling line for carbonated soft drinks in PET bottles 8000 bph delivers an integrated solution for producing soft drinks and sparkling water in 0.50 L and 1.5 L containers. Specifically designed for industrial environments, the system provides a complete technical configuration. It maximizes production efficiency and ensures operational safety by including protection devices and quality control systems at every stage. Moreover, the layout supports continuous operation with minimal downtime. Filling unit and blow molders Nsdswukuzspfx Ahfolf The Cortellazzi Fintec VEGA 40.70.10 isobaric filling monoblock 1998 handles carbonated products while maintaining constant pressure during the filling process. As a result, the system preserves CO2 content and prevents product loss. Two separate blow molding machines feed the containers. A Sidel SBO8 from 1999 ensures continuous high efficiency production, while a Kosme KSB-4000 from 1998 serves as a backup or support unit. In addition, both machines allow quick format changes and stable operation under load. Carbonator and CO2 management The Cortellazzi Kristal Mix 1998 controls carbonation and saturates the product with CO2. Consequently, the unit ensures consistency and stability throughout the filling phase. Notably, it also supports fine tuning of pressure and temperature parameters. Labeling and customization Three labeling systems carry out specific functions. The Kosme Ekstrahotmelt 12TS1E1 1998 applies labels using hot melt glue. Meanwhile, the KHS Carmichael 1995 handles traditional label application. Furthermore, the Esleeve ESM 3200M 2004 applies shrink sleeves to PET containers in various formats. Together, these machines offer flexible labeling solutions for different product lines. Quality control and heat tunnel The Krones Miho module 2008 inspects containers and labels, detecting any defects or irregularities. If necessary, the system can reject non compliant items without interrupting the production flow. Then, the Krones Shrinkmatt 3000 tunnel 2008 uses steam to shrink the sleeves uniformly onto the containers. In particular, this tunnel guarantees even heat distribution, preventing sleeve distortion. Secondary packaging The Dimac Bluestar F30 2007 wraps products into shrink film with speed and precision. As such, this unit optimizes grouping and prepares the packs for palletizing. Additionally, it minimizes material waste and ensures a clean wrap. Handle and cap application The Twin Pack MGE 1997 applies handles to the grouped bottles. Simultaneously, the Bortolin Kemo 1997 feeds caps consistently and ensures uninterrupted sealing of containers. This way, the two systems maintain rhythm and alignment on the line. End of line and automation The Keber Meg Arm palletizer 1998 arranges the finished packs onto pallets.

Condition: new, Year of construction: 2025, SAPI Powder Coating The perfect layer for lasting protection. Powder coating is a highly effective and widely used method for applying a protective and decorative finish to various types of surfaces. It is a dry finishing process in which a fine powder composed of resin, pigments, and additives is applied to a substrate. The powder is electrostatically charged so that it adheres evenly to the surface, forming a uniform coating. To achieve optimal adhesion and durability, the substrate is first thoroughly cleaned and prepared. Oils, dirt, and other contaminants are removed to ensure a clean surface. This is crucial for the powder to bond effectively to the substrate and achieve a strong and long-lasting coating. A powder coating system typically consists of various components and equipment required for the application and curing of powder coatings. SAPI_Powder_spray_gun Spray Booth and Spray Area The booth provides a clean environment for the application process and ensures even powder distribution. Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. Powder Feed System The powder feed system consists of a hopper or container in which the powder coating material is stored. It typically includes equipment such as powder pumps, feed hoses, and powder screens to transport the powder from storage to the spray gun. Pretreatment Equipment Pretreatment equipment is used to prepare the substrate before the powder coating is applied. This may include processes such as cleaning, degreasing, rinsing, and surface treatment to ensure good adhesion and durability of the coating. Curing Oven A curing oven is an essential component of a powder coating system. It is used to heat the coated substrate to the correct temperature so that the powder coating can melt, flow, and cure into a durable finish. The oven typically consists of a conveyor system or racks to transport the coated parts through the oven chamber. Exhaust system Nedpfxswf Dpge Ahfolf An exhaust system will be installed in the facility to extract excess powder, fumes, or volatile compounds generated during the coating process. This system helps maintain a clean and safe working environment for personnel and prevents the accumulation of powder particles in the air.

Condition: used, Year of construction: 2000, machine/vehicle number: LC574, Technical Specifications & Performance Data This used bottling line is a complete isobaric PET solution engineered for high-volume beverage production of still water, sparkling water, and carbonated soft drinks. Built around robust Krones and Simonazzi process equipment with a Sidel SBO14 S2 blow molder, it offers dependable industrial packaging performance with consistent product quality. Line type: Used isobaric PET complete bottling line (second hand) Nominal speed: up to 18,000 bottles/hour (configured for 2.0 L PET; format-dependent) Bottle formats: 0.10 L and 2.0 L; additional formats possible with change parts Container type: PET (air-conveyed handling) Product range: Water (still and sparkling), CSD Core technology: Isobaric rinsing/filling/capping monoblock with downstream labeling and end-of-line packaging Line composition: Approx. 14 integrated machines including blow molder, air conveyors, rinser, isobaric filler, capper, labeler, packer/shrink wrapper, palletizer, stretch wrapper, inspection and coding modules Main manufacturers: Krones, Simonazzi; blow molder: Sidel SBO14 S2 Years: Main line 2000; blow molder 1999 Condition: Ready for operation; safety features included Advanced Automation & Control Systems Centralized PLC/HMI control coordinates blow molding, rinsing, isobaric filling, capping, labeling, and end-of-line functions. Recipe management supports format and product changeovers, with synchronized conveyors and VFD-driven motors to maintain constant flow at high speed. Line accumulation and defective-bottle rejection are integrated to minimize downtime and scrap. Automation level: Fully integrated, recipe-based operation Operator interface: Intuitive HMI with alarm diagnostics and production reporting Electrical: Industrial 3-phase supply (typical 400–460 V, 50/60 Hz; to be confirmed on inspection) Safety: Interlocked guards, emergency stop network, and category-rated safety circuits Nsdpfxew D E Ube Ahfjlf Production Line Integration Capabilities Designed for seamless integration across the packaging hall, the line interfaces upstream with preform handling and syrup room/premix systems and downstream with packers, palletizers, and warehouse logistics. Fast format change procedures and clearly defined change parts enable efficient switching between bottle sizes and product SKUs. Compatible with standard beverage production utilities (CIP, CO₂, chilled water) Interfaces available for inspection systems, laser/inkjet coding, and vision verification Modular conveyors allow adaptation to plant layouts and future upgrades Machine Condition & Maintenance History This second hand complete bottling line is in ready-for-operation condition with safety protections installed. The equipment has been maintained in a production environment and inspected for functional performance. Maintenance records, documentation, and layout drawings can be made available for review during a technical visit. Operational Performance & Versatil...

Condition: used, Year of construction: 1999, operating hours: 500 h, machine/vehicle number: LC392, Used Water Complete Bottling Line Flat Drinks 300 bph 18.9L CapSnap The CapSnap Adapta Series is a modular integrated bottle washing, filling, and capping system. It is the perfect solution for medium-sized HOD water bottling operations. Designed for adaptability – these machines can be configured to handle both 3-Gallon and 5-Gallon bottles. This complete system effectively handles 300 – 600 BPH. Manufacturer: CAP SNAP – Portola – USA Year of production: 1999 (completely refurbished in 2015 and since then it has worked only 500 hours) Capacity: 300 bph Required energy sources: air 6 bar, power 40 kW, cleaning water supply 2 bar and filling water supply Line composition: Semi-automatic cap removal device: This device is used to remove caps from bottles. Entrance conveyor: On this conveyor belt, the bottles are manually placed. Prewash with cold water through nozzles: This is the first stage of washing, using cold water. Wash with warm water and detergent through nozzles: This is the second stage of washing, which uses warm water at 50°C with detergent. Rinse with cold water and disinfectant through nozzles: This is the last washing stage, which uses cold water and disinfectant. Bottle filling outlet conveyor: The bottles are filled here, two at a time. UV Filter: The water is filled through a UV filter, which is built into the water inlet of the bottle. Transport of filled bottles to the capper: Here, the bottles are transported from the filler to the capper. Njdpfx Ahevgud Sefelf Dosage caps through disinfectant on the bottle: Here, the caps are disinfected and ready to be put on the bottles. Bottle cap cylinder: Here the bottle cap is applied. Output conveyor: From here, the bottles are manually loaded onto pallets. Each part of this system has a specific role in the process of bottle filling, and all together they form a functional production Used Water Complete Bottling Line.

Condition: used, Processing and Filling Line for Dairy Products up to 20,000 L/Day This processing line efficiently manages volumes between 15,000 and 20,000 liters of milk per day. Consequently, it ensures high efficiency and the highest quality of finished products. Its capacity thus enables a high daily production return, which is crucial for large-scale operations. Packaging Capabilities Moreover, the line’s specialized packaging system adeptly handles various types of dairy products. For example, workers pack milk in 1.0-liter PVC bags at a rate of 2,400 pieces per hour. Additionally, they package yogurt and kefir in 410-gram and 180-gram containers at a capacity of 3,000 pieces per hour, as well as in 0.5-liter and 1.0-liter PET bottles at a rate of 1,000 pieces per hour. Furthermore, workers package sour cream in both 1,000-gram containers and bowls, each at a capacity of 3,000 pieces per hour. Similarly, they pack cheese in 5.0 kg and 10.0 kg containers for fresh cheese, and in vacuum foil from 500 and 1,000 grams for sliced cheese. Equipment Specifications Manufacturers in Italy, Slovenia, and Serbia constructed the equipment between 1999 and 2016, showcasing the quality and durability of the machines. Specifically, the milk reception unit features digital counters and foam removal systems updated in 2014. It includes horizontal and vertical tanks with capacities up to 3,200 liters, ideal for storage and cooling. Fermentation Units and Filling Lines Insulated duplicators with double walls and planetary mixers support the line’s fermentation functionalities, which are essential for maintaining product uniformity during fermentation. Likewise, automated filling lines distribute sour cream, yogurt, and milk in various packaging formats efficiently, thereby maximizing productivity and reducing downtime. Nledpfx Ahevgvrwefof Equipment Complements and Maintenance Additionally, the line includes accessories such as a triblender for powdered milk, vacuum packaging machines for cheese, and cooling systems for warehouses. These components are crucial for extending preservation and ensuring food safety. The team has regularly serviced and maintained the equipment until production ceased in 2020, thereby demonstrating a consistent commitment to maintenance and operational efficiency. In conclusion, these details highlight the line’s capability to produce high volumes and its configuration to ensure versatility and reliability over time, which are key for those operating in the large-scale dairy sector. List of line components: Milk receiving unit Digital counter with foam remover (2014) Horizontal tank (lactofreeze) capacity 3.200 l cooling on freon – 3 pcs Vertical tank capacity 3.000 l – 2 pcs Unit for pasteurization Pasteurizer (flow) with retainers  capacity 2.000 l Separator (self-cleaning), capacity 2.000 l Homogenizer capacity 2.

Condition: refurbished (used), Meat processing line to produce a coarse sausage mix / burger mix / pet food line Taking a tempered frozen meat block into a Guillotine Giraffe feed up into a mincer, Mincer to coarse mince flaked meat Incline conveyor taking minced meat through a 10 mm to 16 mm hole plate Minced meat transferred by the conveyor into the Mixer Grinder Add seasoning / water etc to complete the recipe Nsdpfozl Tb Nox Ahfslf Mix in the mixer grinder for 3 to 5 minutes Mince out through a 5 mm to 8 mm hole plate into a tote bin. Ruhle Guillotine Scansteel Giraffe Feeder Laska WW 130 2 Cross feed Mincer Incline conveyor Thompson 4000 Mixer Grinder Product ready for the next stage vacuum filler / tray depositor / burger former etc

Condition: used, Used Wine Filling Line 2000 Complete line for still wine filling, consisting of the following machines: Used Depalletizer Automatic depalletizer branded Oma model Depalblock 2000 built in 2002. It reaches speeds of 6000 BPH for the 0.75 lt format. In addition to that it works formats such as bottles of 0.375 – 0.75 and 1.50. This used depalletizer is supplied with all its accident prevention protections and also the user manuals. The loading is carried out from above and there is neither an interlayer removal system nor a pallet magazine. Instead, there are spare parts available. Measurements: Length: 2950 mm Width: 2133 mm Height: 2530 mm Weight: 1550 kg. Volt consumption: 380 Kw: 2 Hz: 50 Used Filling Monoblock of this Used Wine Filling Line The manufacturer of this monoblock is Ave Impianti, and it is an Oceanic 16-16-4 model. It works with the same formats from 0.375 – 0.750 – 1.500 at a speed of 3800 BPH. The direction of rotation is clockwise, and the state is currently in production. This machine is currently used for filling still wine. This machine includes also a rinsing machine that has 16 forceps and does 2 treatments. Then follows the 16-valve filler with a fixed nozzle. Finally, there is the 4-head cork stopper that can process a diameter of up to 26 mm. There are several spare parts for this machine. Njdpevguttsfx Ahfolf Measurements: Length: 4600mm Width: 2300mm Height: 3400mm Consumption Volt: 380 Hz: 50 Used Capper The used Capper is Bertolaso branded and the model is Alfa 110 Inox from 1995 with 1 head. Clockwise rotation direction, is always complete with all available manual and accident prevention protections. The operational status is currently in production and the type of container handled is 0.75 liter Bordolese. The cap type is Stelvin and the size is 30×60, while the neck type is standard. Measurements: Length: 800mm Width: 900mm Height: 2600mm Volt consumption: 380 Used Capsuler This machine is branded Robino and Galandrino model Fenix 2 of the year 2000. It is a used capsuler with 2 heads and the speed reached is 6000 BPH with the following formats: 0.375 – 0.750 – 1.500. There are safety protections and manuals are also available with the necessary instructions. The state is currently in production. The specific product treated is still wine. The types of capsules used are the Enoterms in Polylaminate. Weight: approx. 1800 kg Consumption Volt: 380 Kw: 4.5 Hz: 50 Used Labeling Machine of this Used Wine Filling Line Branded Kosme Model Extra Fix 8T S3 E3 + S2 E2 Adhesives year 2005. Speed of 3000 BPH on the treated formats of 0.375 – 0.750 – 1.500 L. Machine currently in production in the line with its accident prevention protections and user manuals available.

Condition: used, 01. Product to be filled “CSD” 02. Type of Bottle RoundBottles 03. M.O.C. of the Bottle PET Bottles 04. Fill Volume / Bottle sizes 500ml 05. Type of Caps Screw Caps 06. Type of Labels BOPP 07. Output required 416 Bottles Per Minute on 500 ml     BLOWER SIPA 16 CAVITIES 2007 WITH MAINTENNACE OPERATION: Used blow molding machine for PET bottles with production capacity up to 25,000 bph with the 500ml format. Year of construction, 2007. Used blower complete with Octagon tipper, Air recovery system, preform hopper. This machine is immediately available for sale and in case of request we can carry out pre-production maintenance. Detached from production in fully functional status is excellent opportunity for used equipment. We will build new neck personalization for pco 1881 We will build two new set of blow mould as per your request. Air conveyor system NEW/used revised 2024   NEW RINSER /FILLER/SCREW CAPPER, SPORT CAPPER: Auto Rotary 70 Head Rinser Cum 70 Head Counter Pressure Filling Cum 15 Head Rotary Screw Cap Sealing Machine,AND 15 HEAD SPORT CUP system Model Uinibloc : 70x70x15x15, fitted with Disc cap feeder, chute&shoe, SS safety hood, PLC/HMI of Schneider make, Electronic BPM meter & Counter, sensor at in feed & out feed. Fitted with one set of change parts of 250ml PET bottle. All Product Contact Parts like Tank, Valves & all product contact parts will be SS316Grade. Output – 416BPM on 500 ml bottle. Fully Automatic Bulk Cap Elevator Additional Set of Change Parts If Required RINSING SECTION : TOP OF THE ROTARY RINSSER S. SLAT CHAIN CONVEYOR Body fabricated out of pre-polished S.S. Sheets, of 8’ length for carrying empty bottles to water rinsingnozzles and rinsed bottles to the Filling Machine. BOTTLE GRIPPING HEADS The gripping heads hold the bottles by neck. The bottle carrying grippers are supported by carousel thatby turning makes the grip lever arms slide on a fixed helical guide. In this way the bottles areturned upside down to have the openings atthe bottom to coincide with spray nozzle. AIR CLEANING PROCESS The bottles when rotated are brought into theline with the fixed nozzle in such a way thatits opening partially contains the nozzle. Airjet cleaning air sprayed inside the bottle forpresettime. VACUUM PROCESS The bottles when rotated are brought into the Nedpevgt Upofx Ahfjlf ine with the fixed nozzle in such a way that its openingpartially contains the nozzle.

Condition: used, operating hours: 54,000 h, machine/vehicle number: LC597, Used complete line for still wine - 8000 BPHTechnical Specifications & Performance DataThis used bottling line is engineered for reliable beverage production and downstream industrial packaging at up to 8,000 bph. The configuration integrates an MBF filling monoblock (2002) composed of a rinser, filler, and capper, specifically designed for straight cork (flush-to-mouth) application. The line further features a ROBINO & GALANDRINO POKER Z 6/8 (2002) capsuling and shrink-wrapping machine, followed by APE Impianti case handling and KOSME labeling technology. This setup offers robust performance for second-hand applications and flexible format management typical of glass and PET bottle operations.Production speed: 8,000 bottles per hourFilling Monoblock: MBF (Year 2002) – Rinser, Filler, CapperCapping System: Straight cork (flush-to-mouth / tappo raso)Capsuling/Shrinkage: ROBINO & GALANDRINO POKER Z 6/8 (Year 2002)Compatible formats: Typical case pack pattern includes 12 x 0.75L; additional formats manageable with change partsContainers: Designed for bottle handling; configuration suitable for Glass (cylindrical containers)Labeling modules: KOSME STAR 720 12T (cold glue) and KOSME EXTRA ADHESIVE 12T S3 E3 (self-adhesive)Labeling capabilities: Front, back, and neck label (collarino) applicationPackaging modules: APE FORMA 2000 (case erector), APE INCA 2010 (case packer), APE INSER 2001 (divider inserter)Electrical (MBF Monoblock): 380 V, 50 Hz; installed power 17 kWElectrical (Labelers): 400 V, 50 Hz; installed power 4 kW (STAR) and 8 kW (EXTRA ADHESIVE)Pneumatics (MBF): 0.6 MPa (6 bar); air consumption 200 Nl/1'Weights: 9,000 kg (MBF Monoblock), 2,650 kg (STAR 720 12T), 2,000 kg (EXTRA ADHESIVE 12T S3 E3)Compliance: CE-marked componentsAdvanced Automation & Control SystemsThe line leverages modular automation across filling, labeling, and case-handling stations for stable throughput. The MBF monoblock and Robino & Galandrino POKER Z work in synchronized sequence to ensure precise filling levels, hermetic straight cork sealing, and professional capsule finishing. The KOSME labeling units are configured for complex dress-out requirements, allowing for synchronized application of front, back, and neck labels. Operator-friendly controls on each module support quick setup and changeover. APE Impianti packaging modules provide synchronized motion and interlocked safety protections for downstream operations.Production Line Integration CapabilitiesThis production line is designed to operate inline with conveyors and accumulation to match the 8,000 bph target. The MBF filling core ensures hygienic processing, while the ROBINO & GALANDRINO POKER Z provides versatile capsule application immediately fol... Nlodpeyh E Huefx Ahfof

Condition: used, Year of construction: 2010, machine/vehicle number: LC601, Technical Specifications & Performance DataThis complete PET hot-fill bottling line is a high-efficiency used bottling line engineered for juice applications. Built primarily in 2010 with downstream equipment from 2011, it delivers consistent production at 24,000 bottles per hour (bph). The line integrates blowing, hot-fill filling, capping, labeling, secondary packaging, and palletizing, providing a cohesive solution for beverage production and industrial packaging needs.Production speed: 24,000 bphPrimary application: Hot-fill juiceContainer handling: PET bottlesValidated format example: 0.5L, 0.3L, 1.5LNeck mesurment: 28mmManufacturing years: 2010 (core equipment), 2011 (palletizer)Core components: Krones blow molder; CFT hot-fill filler-capper; DASE-SING labeling machine; DIMAC shrink wrapper; TCP bottle cooler and sterilizers (models T30R, TU170RD); TBC palletizer (model LT400)Line type: Blow, fill, cap, label, wrap, and palletizeConfiguration: Integrated continuous production with matched throughput across stationsAdvanced Automation & Control SystemsThe line is designed for synchronized operation from container production to end-of-line packaging. Coordinated controls help maintain stable performance at high speeds and reduce bottlenecks across blowing, filling, labeling, and packaging stations. Operator interfaces facilitate routine adjustments and monitoring, while safety interlocks and guarding support reliable operation in a production environment.Centralized line control with coordinated drives for consistent throughputOperator-friendly interfaces for speed matching and format adjustmentsSafety guarding and interlocked access doorsEmergency stop circuitry across critical stationsQuick-change features to support format and product adjustmentsProduction Line Integration CapabilitiesThis second hand bottling equipment set is engineered to function as a complete packaging line for PET juice, from bottle blowing through palletizing. It can integrate with upstream utilities and downstream warehouse systems. Format changes are supported to align with market requirements, with confirmed capability on 0.5L PET and suitability for similar cylindrical PET formats.Inline operation from blow molding to palletizingCompatible with PET cylindrical bottle formats; validated at 0.5L, 0.3L, 1.5L Hot-fill processing designed for juice productsEnd-of-line shrink wrapping and palletizing for stable distribution packsPotential to adapt speeds and formats within the design envelope of each componentMachine Condition & Maintenance HistoryThe line is currently in production, reflecting regular operational use suitable for immediate deployment after relocation. Component years indicate modern engineering with durable construction standards expected from the listed manufacturers. It is a used bottling line that has been maintained in an industrial beverage environment.Operational status: I... Nsdpezgtpvjfx Ahfolf

Condition: used, operating hours: 11,000 h, Used Bottling Line SIDEL for still water 14400 bph The Used Bottling Line SIDEL for still water 14400 bph delivers a complete solution for bottling still water in PET containers. The line handles 0.50-liter, 0.75-liter, and 1.5-liter bottles, offering flexibility for beverage producers. The Used Bottling Line SIDEL operates at a nominal capacity of 14,400 bottles per hour, making it ideal for medium to high-volume production environments. As a result, technical teams can integrate this system into existing plants or install it as a standalone unit to achieve consistent, high-throughput output. Core Unit of the Used Bottling Line SIDEL: COMBIBLOCK SIDEL 8-40-8 In this Used Bottling Line SIDEL we find the COMBIBLOCK SIDEL 8-40-8, manufactured in 2006, performs blow molding, filling, and capping in a single integrated unit. First, the SBO 8 blow molder forms PET bottles from preforms using 8 cavities, supporting all three bottle formats. Next, the COMBI UNIVERSAL EUROPA WM filler uses 40 volumetric filling valves to deliver precise product dosing and minimize waste during production. Because the system uses volumetric filling, it provides consistent accuracy, especially for low-viscosity products such as still water. Then, the capping unit applies caps using 8 heads on bottles with 25 to 30 mm neck diameters. In addition, operators can perform quick format changes and maintain compatibility with industry-standard closures. Secondary Packaging: CERMEX Tray Packer in the Used Bottling Line SIDEL Following the filling and capping process, the CERMEX tray packer, installed in 2007, arranges and packs bottles in pre-defined tray configurations. It forms the following bundles: 1.5-liter bottles in a 2×3 configuration Nledpfev U Ni Sjx Ahfsf 0.75-liter bottles in a 4×3 configuration 0.50-liter bottles in a 4×3 configuration Consequently, the unit ensures consistent secondary packaging and supports downstream palletizing operations. Moreover, the machine maintains uniformity across batches and eliminates manual packing variability. Therefore, it significantly increases line efficiency. Compressed Air Supply: High and Low-Pressure Compressors The line includes two compressors that support the blow molding and cooling systems. Specifically, the SIAD TEMPO 2 high-pressure compressor delivers 1,500 m³/h and supplies compressed air to the SBO 8 blow molder. In contrast, the BAC F-100 low-pressure compressor, manufactured by Baltimore Aircoil in 2006, supports the evaporative cooling process. Together, these compressors maintain optimal conditions for both product quality and mechanical performance. Bottle Conveying System: SIDEL Conveyors The SIDEL conveyors, installed in 2006, transfer bottles between stations smoothly and efficiently. As a result, the conveyors synchronize movements across modules and prevent accumulation or blockages.

Condition: used, machine/vehicle number: LC579, Used Isobaric Complete Bottling Line for Still and Sparkling Wine up to 4500 bph This complete bottling line has been designed and configured to provide a high-quality, consistent filling process for both still and sparkling wines. Built around an isobaric tribloc system, it integrates rinsing, filling, and capping functions in a continuous flow, ensuring excellent efficiency while maintaining product integrity. The line is currently set up for still wines at an output of 4,500 bottles per hour and for sparkling wines at 3,000 bottles per hour. It is already technically prepared for sparkling wine production and only requires the addition of a mushroom corker, a capsule applicator for spumante hoods, and a heating tunnel if needed. The system is equipped with dedicated conveyors, a centralized lubrication system, and separate control panels for conveyor management, enabling straightforward maintenance and integration into existing plant automation. The entire layout follows a linear configuration, optimised for space utilisation and ensuring smooth product transfer between each stage without unnecessary accumulation points. Bottling Process and Core Machinery At the start of the line, empty bottles are automatically fed into the system via a depalletizer. This equipment gently lifts and transfers the bottles onto the feeding table while maintaining their integrity. Bottles are then directed to the tribloc system, where three key operations are performed in sequence: rinsing, filling, and capping. Nedpfx Asw Imp Hjhfslf The isobaric filling technology ensures precise fill levels and consistent carbonation retention for sparkling wines, while also being perfectly suited for still wine bottling. The filling valves are designed to minimise oxygen pickup, which is crucial for preserving the wine’s sensory qualities and shelf life. The rinser operates with clean water or a sanitising solution, ensuring bottles are free from contaminants prior to filling. The capping turret, currently configured for still wine closures, applies either BVS screw caps or traditional corks, depending on the selected format. A dosing unit for gum arabic is integrated into the line. This system allows for precise addition of stabilising agents post-filling, which helps maintain wine clarity and prevent precipitation during storage. A dedicated steam generator (vapouriser) is included for both line sanitisation and, when required, pre-heating applications. Prior to filling, a microfiltration unit is positioned to ensure that the product entering the tribloc meets the desired microbiological standards. This step is essential for ensuring product stability and quality without the need for excessive chemical preservatives. Downstream, bottles are transferred to the labelling station. While the labelling unit is supplied by a third-party manufacturer, it is elect...

Condition: used, Used Bottling Line KRONES for still, sparkling water and CSD 12000 bph The Used Bottling Line KRONES for still, sparkling water and CSD 12000 bph ensures good-performance bottling for mineral water, sparkling water, and carbonated soft drinks (CSD). Specifically, it processes PET containers in 1.5 l format, using isobaric filling technology to preserve the quality of both carbonated and non-carbonated beverages. Moreover, the bottle neck standard is PCO 1810. In addition, this Used Bottling Line KRONES for still, sparkling water and CSD – 12000 bph integrates synchronized machines, thereby optimizing every production step, from preform feeding to final packaging and palletizing. Preform Feeding and Preparation in this Used Bottling Line KRONES The process begins with the preform feeder, which continuously supplies preforms to the preform inverter. As a result, the line maintains a smooth and consistent flow, with correct alignment of preforms before the blowing process. Blow Molding Machine Next, the blow molding machine—a Krones Contiform Compact 10, year 2001—uses a Siemens S5 control system to manage heating and blowing phases. Consequently, it transforms preforms into precisely shaped PET bottles ready for downstream processes. Air Conveyors of the Used Bottling Line KRONES for still and sparkling water Once the bottles are formed, they are transferred via Krones AirCo air conveyors, model AirCo, year 2011. These conveyors extend for approximately 110 meters. Furthermore, they are controlled by inverters and a Siemens S5 controller, ensuring the transport to the next station. Mixing and Carbonation Unit Before filling, the product passes through the mixing and carbonation unit, a Krones MS, year 1992. This system mixes water and syrup, and then carbonates the product with CO₂ for sparkling drinks, or injects nitrogen for still water. Notably, the unit ensures continuous operation and mixing, thus maintaining product consistency throughout production. Filling Monoblock Following the mixer, the filling monoblock—Krones VK PET 100 SV K, year 1993—comes into action. Controlled by a Schleicher system, it includes: Bottle rinsing unit Isobaric filling machine, suitable for both still and carbonated beverages Capping unit for PCO 1810 PET bottles CIP (Cleaning-In-Place) connections Capacity to handle 1.5 l format Nlsdpfxjwa Tqcs Ahfjf Importantly, this unit represents the heart of the line, performing several critical functions within a compact and coordinated block. Labeling Machine Immediately after filling, a Krones labeling machine, model Canmatic, year 1997, applies labels to PET bottles with precision. As such, it ensures accurate positioning and high throughput, contributing to a professional final presentation. Shrink Wrapper Subsequently, the shrink wrapper—Dimac Green Star Big, year 2011—forms multipacks using shrink film.

Condition: used, machine/vehicle number: LC600, Technical Specifications & Performance DataThis used bottling line is configured for high-efficiency beverage production in 0.5L PET bottles. Optimized for sparkling and still water, the line delivers reliable throughput with robust end-of-line packaging and palletizing. The configuration is non-combi, featuring a separate blow molding machine upstream of the filling monoblock section, ideal for flexible maintenance and line balancing.Production speed: 25,000 bphBottle formats: Compatible with 0.5L bottle formatContainers: Designed for PET bottle handlingConfiguration: Non-combi (separate blow molding and filling)Main components and years: Sidel Universal SBO 14 blow molder (2007), Sarcmi 70-10 ISO Filling Monoblock (1988 – Overhauled in 2025), Labeling machine Sarcmi (2011), Shrink wrapper Zambelli (2004), Handle applicator (2004), Palletizer ACMI double-head (1992).Advanced Automation & Control SystemsThe line benefits from a modernized conveyor and control system, with the conveyor management and electrical panels refurbished in 2010–2011. This upgrade improves synchronization between modules, enhances safety interlocks, and supports stable high-speed performance across forming, filling monoblock, labeling, and packaging stations.Refurbished conveyor control and electrical panels in 2010–2011Integrated interlocks for safe operation at high throughputNon-combi architecture simplifies maintenance and phased upgradesProduction Line Integration CapabilitiesEngineered as a complete production solution for water bottling, this second-hand bottling equipment integrates seamlessly from blow molding to end-of-line palletizing. The non-combi layout enables independent operation and optimization of the blow molder and filling monoblock, facilitating changeovers and maintenance without halting the entire line.Inline flow: Blow molding → Filling Monoblock → Labeling → Shrink wrapping → Handle application → PalletizingConveyor system reworked for reliable accumulation and transferSuitable for sparkling and still water applications in PETMachine Condition & Maintenance HistoryThis used bottling line has benefited from targeted upgrades to the conveyor management and electrical panels completed in 2010–2011. A key highlight of the line is the Sarcmi 70-10 ISO Filling Monoblock, which, despite its original 1988 manufacture, has been completely overhauled in 2025 to ensure peak operational reliability. The line is described in working configuration and is presented as a ready-to-run second-hand industrial packaging solution.Filling Monoblock Sarcmi 70-10 ISO: Overhauled in 2025Conveyors and electrical panel management refurbished: 2010–2011Well-known OEM components across the lineReady for operation with existing 0.5L PET water setupOperational Performance & VersatilityOptimized for beverage production with a focus on water, the line manages both still and carbonated profiles effectively. The Si... Nsdpfsyk E Srjx Ahfslf

Condition: used, operating hours: 1,800 h, Used Bottling Line for champagne, sparkling and still wine 4000 bph Product Compatibility and Filling Technology This bottling line processes still wine, sparkling wine, and champagne with high efficiency. Specifically, it handles only glass bottles and uses an isobaric filling system, which ensures precise control when filling pressurized liquids, such as sparkling products. As a result, wineries that produce multiple wine types with different physical and chemical properties can rely on this line for consistent, adaptable operation. In other words, the system addresses diverse product demands without compromising output quality. Performance Output by Bottle Format Depending on the bottle format, the line delivers different outputs. It processes both 0.20l and 0,375l bottles at 4,500 bottles per hour. Meanwhile, it handles 0,75l bottles at 4,000 bottles per hour and 1.5l bottles at 2,000 bottles per hour. Therefore, this production speed suits medium-scale wineries that require flexibility while maintaining industrial performance. Commissioning, Runtime, and Immediate Availability Technicians installed the line in 2022. Since that time, it has operated for 1,800 hours and produced approximately 2,400,000 bottles. The system continues to run in production, which means it remains in good operational condition. Furthermore, its immediate availability offers an advantage to wineries needing rapid deployment. Because of this, buyers can integrate the equipment without significant downtime. Primary Bottling Block: Depalletizing, Rinsing, Filling, and Capping The process starts with a Duetti Packaging depalletizer, model M, which automatically feeds empty bottles into the system. Subsequently, the GAI monoblock, model 4033RES-HP-A01, performs rinsing, filling, and capping in a single integrated unit. The dual-stage rinser (water + gas) uses 16 grippers to sanitize bottles. A high-pressure electropneumatic filler with 24 valves carries out isobaric filling. Notably, the 3-head rotary corker applies straight corks, champagne-style mushroom corks, plastic closures, and aluminum screw caps. Moreover, the monoblock includes multi-format screws, motorized guide adjustments, dummy bottles for internal rinser sterilization, and a solenoid valve kit to switch between gas and cleaning liquid inputs. Altogether, this configuration provides high precision, minimal changeover time, and excellent bottle handling. CIP and Quality Control: Cleaning and Inspection Systems To maintain hygiene, the WIN&TECH CIP unit, model Win&Guard C 23.05, manages automatic cleaning via a steam-water heat exchanger and a three-stage filtration system across two independent circuits. Additionally, this system allows operators to sanitize the internal components between production runs without disassembly. At the same time, the CMP inspection unit, model CV-MUF108, performs continuous quality control. Njdpfewgw Dgox Ahfelf

Condition: ready for operation (used), Year of construction: 2003, Complete Tetra Pak line TBA 21-1000 Slim, includes: 1. TBA/21 1000 Slim filler, V050, YOM 2003, 52.000 running hours 2. CAP30 cap applicator for Helicap23 Pro26 3. Easy Ride Terplus cartons accumulator 4. TCBP70 wrap around packer 5. Conveyor system 6. Conveyors system Nedpsycwvaofx Ahfolf The line is in very good condition, still in production till April. Can be sold without CAP30 applicator.

Condition: used, machine/vehicle number: LC596, Used complete line for still wine - 5000 BPHTechnical Specifications & Performance DataThis used bottling line is configured for glass bottle handling with a comprehensive sequence from filtration to case packing and palletizing. It is a second hand solution engineered for industrial packaging and beverage production, integrating well-known European manufacturers. The configuration covers rinsing, filling, capping (flush cork and aluminum), capsule application (heat-shrink and polylaminate), adhesive labeling, and end-of-line packaging.Container type: Glass bottlesCore monoblock: MBF Syncrofill 1200.25/1200.30LV/360.4SR/240.4AV/240 (rinsing–filling–capping)Filtering: Seitz Orion plate filtration groupBottle preparation: SICK Blancamat 8 bottle washer (pre-labeling)Capsule application: Nortan Prisma 40 (heat-shrink), Robino & Galandrino Astra 6 (polylaminate)Labeling: Cavagnino & Gatti CG E8-4-2NPS (3 stations: front/back/neck), Pago PAG.876 carton labelerConveying/accumulation: MBF accumulation table (conveyor)Case handling (option set 1): Bortolin & Kemo FOC 23 30 case erector, MA 88/1 divider inserter, IAM 2T AP case packer, MARA HM case sealer, PAC 2000 palletizerCase handling (option set 2): Mas Pack MAS 1200 case erector (400 Vac, 2 kW), Mas Pack Minipack 21/4 case packer (400 Vac, 6 kW), Mas Pack Seal 1200 case sealer, Mas Pack Exacta R Astride divider inserterAuxiliary equipment: PREO E0P051 4R2 hotmelt units, Ber PDC 30 carton scaleSelected component years: 2011 (Mas Pack MAS 1200, Seal 1200), 2015 (Mas Pack Minipack 21/4, Exacta R Astride), 2001 (Ber PDC 30)Certifications: CE markings on Mas Pack modulesAdvanced Automation & Control SystemsThe line combines automated capsule application, adhesive labeling with multi-station control, and end-of-line carton forming, gluing, and packing. Modules feature integrated safety circuits and CE-compliant controls. Hotmelt application is handled by PREO melters for reliable carton sealing. Quick adjustments across labeling stations and format handling enable efficient changeovers within glass bottle families.Adhesive labeling with 3-station control for front/back/neck labelsAutomated heat-shrink and polylaminate capsule applicationHotmelt application via PREO E0P051 4R2 unitsCE-compliant electrical panels on Mas Pack packaging modulesOperator-friendly HMI/controls at packaging stations (per module)Production Line Integration CapabilitiesDesigned for inline operation, the system integrates filtration, monoblock rinsing–filling–capping, labeling, and complete end-of-line packaging. The conveyorized accumulation table assists with buffer management for steady flow between wet and dry ends. The end-of-line can be configured with either Bortolin & Kemo or Mas Pack equipment to match site preferences and spare parts policy.Inline glass bottle processing from filtration to palletizingFo.. Nlodpfxeyhbhqe Ahfsf

Condition: used, Used Isobaric Complete PET Line for Soft Drinks 6000 bottles/h The line consists of: A Kosme KSB 4 L PET blow molding machine from 2004 with a speed of 6800 bottles/h for 0,5L, 6000 bottles/h for 2L, 5200 bottles/h for 2,5L Air conveyor from blowing machine to filler. MAS Mixer from 2004. Nljdpfovguyaex Ahfef MAS rinser, filler and capper from 2004, renovated in 2015, capacity 0,5l – 10.000 palack/h, 1,5l – 5000 units, rinser cranes – 32 units, filling valves – 32 units, cork heads – 8 units. BAT forum labeller type EBI 07 year 2006, capacity 1500-6500 units/hour, dimensions 2450x90x950-1300. BAR forum packer year 2005, capacity 12 packages/min. Conveyors, Cyklop International automatic stretch wrapper type GL215 year 2003, turntable 8 mm steel plate resting on 12 supporting rollers, feeder ramp 5 positions possible, power supply 230/440V, three-phase, 50Hz+Neutral; pallet load length/width max. diameter of 1675mm (*2000mm), pallet height – 2200mm (*2600mm), pallet weight max 1500kg (*2000 kg)

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Workpiece & Performance Panel Formats: • Length 1,200–1,400 mm • Width 195 mm • Thickness 5–12 mm Line Performance (excerpt): • Multi-blade saw feed: 2–48 m/min • Pack assembly: max. 100 pieces/min • Packaging: up to 12 packs/min • Palletizing: up to 12 cycles/min Feeding & Cutting 1. BARGSTEDT TBP16/DG/30/22/S Gantry Feeder Vacuum gantry for feeding raw panels (fixed edge on the right) • Workpiece weight up to 100 kg • Capacity up to 5 cycles/min • Pallet return and light barrier safety system 2. BARGSTEDT TPP20/28/21/S Pallet Magazine Provision of empty pallets for feeding • Capacity approx. 12 pallets • Max. stack height 1,800 mm 3. BARGSTEDT TAR40/28/22 Décor Alignment Station Aligns panels for décor-oriented further processing 4. Multi-blade Circular Saw K34/G/2200 Longitudinal splitting with edge trimming • Feed speed 2–48 m/min • Cutting height up to 58 mm • Main motor 22 kW • 9 saw blades + 2 chippers 5. Brushing Unit (after longitudinal cut) Horsehair brush, working width 2,200 mm, with extraction 6. BARGSTEDT Cross-Cut Saw Station HPp11 Cross-cutting in throughfeed mode with pressure beam • Cutting width 2,200 mm • Pneumatic overhead pressure rollers Singulation & Transfer 7. BARGSTEDT TFV40/ZR/RL/22/13/02 Singulation Station Turner with compartments (2×8 compartments) for distributing multi-panel assemblies • Conveyor speed 10–50 m/min 8. BARGSTEDT Right-Angle Transfer (TW) 90° transfer with belt conveyors, feed up to 130 m/min For transfer to the profiling line Profile Processing (soundproofed) 9. HOMAG FR 20/08/10/S Longitudinal Profiling Double-sided format processing • 6 units per side • 6.6 kW per unit • Tool diameter up to 200 mm • Joint color application + drying 10. HOMAG FL 20/08/15/S Cross Profiling Double-sided end profiling • 6 units per side • identical performance structure • integrated edge sealing 11. Sonolit Soundproof Cabin Housing for both HOMAG profiling machines • Approx. 12,000 × 7,000 × 3,000 mm Post-processing 12. BARGSTEDT TTK44/21/14/02 Dry Turner Workpiece turning in throughfeed • up to 100 cycles/min 13. BARGSTEDT B017/R/19/12/2/S Brushing Unit Double-sided fine cleaning with extraction Packing 14. BARGSTEDT TVP40/L/14/02 Pack Assembly Station Automatic pack forming with 1st/2nd choice sorting • Panels 1,200–1,400 × 195 × 5–12 mm • Pack height up to 80 mm • Capacity 100 pieces/min 15. BARGSTEDT TVK40/R/14/02 Carton Station Folding and providing cartons prior to packaging • Up to 12 packs/min 16. BARGSTEDT TVA40/07/02 Paper Feeder Automatic application of protective paper • up to 10 packs/min guaranteed 17. Labelling Station Automatic pack identification (format range according to packaging data) Nlsdpoywxrasfx Ahfsf Packaging 18. LP Maskin LPFK-2PFL-400 Shrinking Unit Fully automatic film packaging with shrink tunnel • Connection load 36–40 kW • Capacity up to 12 packs/min • Film width up to 800 mm 19. BARGSTEDT Belt Conveyor TFB20/017/04 with Air Shower Cooling section after the shrink tunnel Palletizing 20. BARGSTEDT TSH80/EO/14/08 Crosswise Package Stacking Automatic stacking of packages onto pallets • Packages up to 1,400 × 195 × 58 mm • Capacity max. 12 cycles/min 21. BARGSTEDT TBS0/D/30/08/S Swing Arm Stacker Layer-by-layer palletizing with vacuum suction cups • up to 6 cycles/min • Package weight up to 50 kg 22. BARGSTEDT PP20/12/08 Pallet Magazine Automatic provision of empty pallets for final palletizing

Condition: excellent (used), The line for gnocchi includes: - GLASS (Germany) cooking kettle, type PRO-3, tilting, 500 ltr. capacity , with mixing, vacuum and cooling - bin loader for 200 ltr. bins feeding the dough into the forming machine - SANDORE (Italy) forming machine , type NF 100 C, power 8.5 kW - segment feeder, type Z, feeding the product to the vibrating tunnel, width: 400 cm, height 200 cm, drying and cleaning the product (vibrating screens, blowing turbines) - SARP (Italy) vibrating tunnel, type STR 4107, power 4.7 kW - SARP (Italy) waste and water separator, model FILTRO, with vacuum extraction from a vibrating tunnel, power 2.2 kW - conveyor feeding to the weighing machine, type Z, height 500 cm - weigher platform with stairs, dimensions: 500 cm x 500 cm on posts 220 cm high - BVBA (Belgium) 10-head weigher, type 01AAH / WS Nlodpfx Ahsfwmt Ujfof - TIROMAT BL-150 (Italy) packing machine, type ETI 422N, linear packing machine for vacuum packing, 2 dimensions of forms - segment conveyor that discharges the finished product to the carton boxes packing warehouse, a spiral conveyor that outputs packages to a height of 260 cm + a straight section of 20 meters

Condition: used, Truck dimensions (pallets): From 1 to 4) 140x110 h.120 Kg. 600 5) 140x130 h.40 Kg. 100 6) 150x100 h.90 Kg. 300 7) 320x100 h.120 Kg. 800 8) 320x90 h.80 Kg. 300 Inventory of parts: No. 69 pieces of 3 meters (total 207 meters) No. 1 piece of 2.80 meters No. 13 pieces of 3 meters (total 39 meters) No. 6 pieces of 1.80 meters (total 16.8 meters) nr. 2 pieces of 2.40 meters (total 4.8 meters) No. 1 piece of 1.50 meters nr. 2 pieces of 0.70 meters (total 1.4 meters) Nlodpex Tuu Nsfx Ahfof nr. 2 pieces of 1 meter (total 2 meters) No. 1 piece of 1.50 meters No. 17 curves of 1.20 linear meters (total 20.4 linear meters) with a pitch (diameter) of 1.15 meters No. 6 curves of 0.3 meters (total 1.8 meters) No. 1 trailer with 1.50 meter track

Condition: good (used), Year of construction: 2019, REF: MM6469 Complete tube filling and sealing system, comprising of the following equipment: Nlodszp E Sbjpfx Ahfef 1 x Collette high-speed mixer with 2 x mixing bowls (for batches of 150kg mix), pump and piping to feed directly from the bowl to the tube filling/sealing machine. 1 x Axomatic rotary tube filler and sealer. Manufacturer - Axomatic Srl. Type - AXO 1000 MATIC. Date of manufacture – 2019. Speed - 60 to 90 tubes/minute. Fitted with loading hopper, tube selector, detector for missing tubes on the carousel, filler, seal with code in seal, crimper (at top for waste) and exit chute. Supplied with Eurocold glycol chiller, pump, pipework and 2 x pallets of tubes. This unit has had all air pipes replaced. Previously used and set up for icing frosting tubes but the weight and tube size is variable (10g to 120g). Electrical requirements - 3 phase. Maximum air pressure - 8 Bar. Dimensions of AXO 1000 MATIC tube filling system - 2300mm long x 1400mm wide x 2350mm high. Weight of of AXO 1000 MATIC tube filling system - 1100 kg.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Complete beer canning line for beer (standard 330 and 500 ml can): 10 000 cans per hour (500ml), fully optimized and calibrated. Only 4 machine operators/workers in filling process. The offer includes: Depalletization, rinser, filles, seamer, RTG level inspection, dryer, carton machine, palletization, CIP, flas pasteurization Padovan, HGB,chiller, compressor etc. Nledpsuq Sb Sjfx Ahfof

Condition: used, Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Cold Rolled and Hot Rolled Steel 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Thickness: .032″-.375” Complete Line with the Following Components: L-Type Entry Coil Car 40,000# Max Coil Weight Uncoiler: Nedpfxetiy Ntj Ahfjlf Coil ID: 23-30.50” Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll 5 Roll Coil Breaker Entry Adjustable Edge Guides Entry Crop Shear Slitting Head: 10” Arbors 40 HP Motor Drive 2 Scrap Winders Recoiler: Coil OD: 72” Max Coil ID: 24” 150HP DC Motor 3 Arm Exit Turnstile 40,000# per Arm Motorized Turn Complete Line with Knives, Rubbers, and Spacers Controls, Hydraulics, and Electrics

Year of construction: 2025, condition: used, functionality: unexamined, Complete Automatic Roll Forming Line (fully compatible with all Unistrut products) Year of manufacture: 2025 Model: CIRF-2019-2486 Unistrut 41 x 41 and 41 x 21 profile Approximately 15 meters per minute UK / Irish wiring standard (UK wiring schematics, safety pull cord system around main beds) Nlsdjzc Hkgjpfx Ahfsf with 2-ton de-coiler 3-stage, 3-ram punching unit (Hole Size: Approx 12mm × 25mm / Hole Spacing: Approx 50mm centers) Fully automatic upstroke shear Auto Hydraulic Logo printer/stamper Discharge table Overall Length: Approximately 30 meters