Used Ciclomatic Ciclomatic Cg 230 for sale (5,386)

Condition: reconditioned (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) mm 0,4 / 1 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 / 1300 Numerical Control / Software ICOS open (windows XP) Adjustable feeding speed (m/min ) 10 - 50 Without Transmission bar (Master & Slave system) SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Hogging Units (2 x Kw 8) EDGE-BANDING PART (for each side): Glueing Unit (EVA-Hot Melt + Quick Melt Unit) 04.1570 + 283.205 Edge coils supporting unit (No. 6 reels) Dsdsyypi Ujpfx Aixsck SERVO-DRIVE guillotine shear (cutting the edge/band) Pressure zone (N.C. adjustment) Fine Trimming unit 08.055 (Kw 1 x 2) 0°-30° Profile Scraping unit 08.519 Glue scraping unit 08.50 Buffing unit 08.617-2 (2 x Kw 0,18) Spraying Unit (for polishing liquid) Milling grooving unit 08.190 (1 x Kw 4,5) 0°-90° / 180°-270°

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Total press force: 16,000 kN Force application point before the PMI: 18 mm Number of strokes adjustable continuously in automatic mode: 10 - 22 1/min Slide stroke: 605 mm Slide adjustment: 400 mm Mold height (stroke downwards, adjustment upwards): 1300 mm Table dimensions: 4500 × 2300 mm Slide dimensions: 4500 × 2300 mm Table height from the ground: 600 mm Table stroke: T-Track Transfer stroke: 0 - 1200 mm Internal clearance of the guide shoulder for the clamping pins (min.): 800 mm Dcedpfx Aiozldwujxsk Internal clearance of the guide shoulder for the clamping pins (max.): 2400 mm Lifting stroke: 0 - 280 mm Cushions in the base (hydraulic): 2 pcs. Positioning of both cushions: Motorized and adjustable Cushion force: 300 - 2000 kN Cushion stroke: 0 - 250 mm Cushion surface area: 1600 × 950 mm Pneumatic cushion in the slide: 2 pcs. Cushion force in the slide: 55 - 550 kN Maximum cushion stroke in the slide: 150 mm Left slide cushion surface area: 1450 × 1600 mm Right slide cushion surface area: 1300 × 1600 mm Maximum weight of the upper part of the mold: 36,000 kg Maximum total weight of the mold: 40,000 kg Technical data for the CISAM line: • Strip width: 300 - 1600 mm • Strip thickness: 0.5 - 3.0 mm • Tensile strength: 600 MPa • Yield strength: 400 MPa • Feed rate: 200 - 1300 mm • Feed accuracy: ±0.1 mm • Maximum feed cross-section: 4,000 mm² • Strip entry height above the table: 500 - 800 mm • Maximum coil weight: 25,000 kg • Coil outer diameter: 900 - 1,855 mm • Mandrel expansion range: 500 - 610 mm • Nominal coil inner diameter: 610 mm • Straightening rollers: 9 pcs. • Straightening unit with cassette construction

Condition: used, mileage: 10,000 km, power: 169 kW (229.78 HP), first registration: 01/2026, fuel type: diesel, overall weight: 12,000 kg, color: white, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: ABS, air conditioning, cruise control, differential lock, parking heater, trailer coupling, Permissible total weight: 12,000 kg, fabric seats, interior color anthracite, leaf-air suspension, 1 x airbag, tachograph, electronic braking system (EBS), air-suspended driver's seat, seat heating, radio, audio interface, reversing camera, leather steering wheel, power steering, sunroof, roof spoiler, electric exterior mirrors, wide-angle mirror, immobilizer, central locking, sun visor, lighting package, daytime running lights, cup holder, light sensor, body dimensions: Junge box: dry freight body. 7.2 tail-lift. Body dimensions and weights 12t / 16t / 18t Body length internal: 7,280 mm Body width internal: 2,475 mm Body height internal: 2,400 mm for 12 / 16t, 2,600 mm for 18t Portal width internal: 2,450 mm Portal height internal: 2,360 mm for 12 / 16t, 2,560 mm for 18t Dry freight box body with rear portal open and standard equipment 1,480 kg for 12 / 16t, 2,040 kg for 18t Number of pallet spaces: 18 for 12t Distribution Ext. Day Cab, top air intake, extended day cab, mechanically reinforced cab suspension, exterior sun visor 'green transparent', halogen headlights, fog lamps and corner/fog light, reversing camera with 5m cable, adjustable high roof spoiler (set), 1 long side fender (set), headlamp trims & bumper: cab color, cab steps and wheel arches in cab color, roof spoiler color: Crystal White, side fender color: Crystal White, steering wheel: black leather, pneumatic steering column lock, driver's seat: air-suspended luxury driver's seat, driver's seat armrest, co-driver's seat: air-suspended, co-driver's seat armrest, auxiliary heating Air Top 2000, manual sunroof operation, ECAS remote control, speed limiter setting 90 km/h, airbag (driver) and 2 seatbelt tensioners, reverse warning with self-adjusting volume, manual main switch, rear: 8.50 t, air suspension, SR8.14 steel disc wheels, black, black wheel trim rings, engine PX-7, 167 kW / 227 hp, cab emblem: 230, 8-speed PowerLine 8AP1000 overdrive gearbox, 4.89-0.64 final drive ratio 3.73, mechanical differential. Djdpjymg H Nofx Aixeck

Condition: used, machine/vehicle number: 008394, Max. panel width: 3800 mm Max. panel length: 3800 mm Main saw blade projection: 55 mm No of Grippers: 4 Dcedjygtbtopfx Aixjk

Condition: used, Year of construction: 1989, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 380 V, input current: 50 A, input frequency: 50 Hz, cutting height (max.): 130 mm, cutting width (max.): 230 mm, saw blade diameter: 380 mm, height adjustment type: electric, saw blade bore: 80 mm, actuation type: electric, rotational speed (max.): 4,500 rpm, rotational speed (min.): 3,200 rpm, total length: 5,200 mm, total width: 2,500 mm, total height: 1,800 mm, overall weight: 4,300 kg, table height: 850 mm, Equipment: documentation/manual, rotational speed infinitely variable, saw blade guard, We are offering this used WEINIG KR 230 E high-performance parallel trimming saw with automatic return, manufactured in 1989. Djdszkhbbopfx Aixeck Additional equipment: - Electronic 1-axis adjustment with digital target/actual value display including subtraction electronics - Attachment sleeve for multi-blade cutting - Feed chain with screwed-on spikes - 2 lasers for indicating the saw blade position including adjustment spindle - Automatic cross and return conveyor - Central lubrication system Type: KR 230 E Year of manufacture: 1989 Machine No.: 24484 Serial No.: 91300 Order No.: 91307 Operating voltage: 380 V Frequency: 50 Hz Rated current: 50 A Wiring diagram No.: 862218 Weight: approx. 4,300 kg If you have any questions or require further information, please do not hesitate to send us a message or call us.

Year of construction: 1992, condition: ready for operation (used), A chain-feed multi-rip saw is offered. Cutting width: 230mm, max. passage width: 650mm, max. cutting height: 130mm, saw arbor diameter: 65mm, min. workpiece length: 450mm, saw arbor speed: 3900rpm, working height: 850mm, max. feed speed: 48m/min. Dimensions: approx. 2700mm/1900mm/2000mm, weight: approx. 2500kg. Inspection by prior arrangement is possible. Dcsdpfozl U Idsx Aixok

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CDT50 in the trailer version covers a pressure range from 230 to 2000 bar with a flow rate of 11 to 80 l/min. The pump is driven by a water-cooled 4-cylinder Toyota diesel engine. To ensure durability and corrosion resistance, the frame inside the trailer is made of hot-dip galvanized steel. In addition, the frame is primed and then painted, which creates a very appealing appearance. The frame can be easily pulled out for maintenance. The CD50 in the trailer version can be configured with numerous options, such as a hot water boiler, an electrically powered hose reel, a remote control, etc. However, it is similar to but not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Flow rate CDT50-230 230 bar 80 Lpm CDT50-400 400 bar 40 Lpm CDT50-500 500 bar 33 Lpm CDT50-700 700 bar 25 Lpm CDT50-1000 1000 bar 20 Lpm CDT50-1250 1250 bar 15 Lpm CDT50-1380 1380 bar 13 Lpm CDT50-2000 2000 bar 11 Lpm General specifications: ----- Max. pump speed: 1160 rpm Drive engine: Toyota Diesel 4 Cyl. Water-cooled Drive engine power: 37.3 kW Drive engine speed: 1900 rpm Tank: 90 L Max. fuel consumption: 11.0 L/h Noise level (1m): 89 dBa Dimensions and weight: 3050mm x 1700mm x 1900 mm (2000 kg) Dcjdpfxjhgbkfj Aixok

Condition: used, turning diameter over bed 460 mm turning diameter over slide rest 260 mm turning length 1500 mm turning diameter in the gap 600 mm turning speeds 22 - 1500 U/min centre height 230 mm total power requirement 6,5 KW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,8 x 1,2 x 1,5 m Centre lathe Dcodpfx Aiszhn Uvoxjk - Forkardt F200 3-jaw chuck - Multifix quick-change tool post - Steady rest - Chip tray - Tailstock centre

Condition: ready for operation (used), Danaher Motion KT4030-10 high-frequency converter SN: K4030-24003-2 – IN 3 x 230-480V / 32 A / 50-60Hz, used, in good condition, 100% fully functional, delivery scope as shown in the photos. Dcsdpex Eq Ezsfx Aixok

Condition: ready for operation (used), Heidenhain UE 230 ID 329037-01. The costs only include the repair analysis of your component, which you can send to us. After we assess your component, you will receive a quotation with the actual repair costs. Once you approve the repair, the analysis costs will be waived. As part of the repair process, your component will be fully overhauled and comes with a 3-month warranty provided by us. Dcsdsy Nqzwjpfx Aixjk

Condition: ready for operation (used), Heidenhain UR 230 compact inverter Id.362 593-02 SN: 15161883, the item has been completely overhauled and comes with a 3-month warranty, used, in good condition, 100% functional, scope of delivery as per photos. Dsdpfx Ajx Eticeixock

Condition: ready for operation (used), Bosch TR15II-XA-230 / Transistor amplifier SN: 699293, used, good condition, 100% functional, delivery as shown in photos. Dedpjy Rckaofx Aixsck

Condition: ready for operation (used), Heidenhain UE 230 ID 329037-02. The costs cover only the repair analysis of your component, which you can send to us. After inspecting your component, you will receive a quotation with the actual repair costs. Once you approve the repair, the costs for the analysis will be waived. As part of the repair process, your component will be fully overhauled and will come with a 3-month warranty from us. Dodpfey Nqz Dox Aixsck

Condition: ready for operation (used), Metronic MI64210200-01 control panel - 230 V / 1.0 A / 50 Hz, used, minor signs of use, 100% functional, scope of delivery as per photos Dcedpfx Astxuhxoixjk

Condition: ready for operation (used), Georgii Kobold KSY 063.60 D-R4/230 servo motor SN:819952, used, good condition, 100% functional, scope of delivery as per photos Djdpfev E Ttiox Aixsck

Condition: new, GMN TSE 240 cg - 5000 / 37 grinding spindle SN:384125, unused in opened original packaging, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire separately for packing and shipping costs! Dcsdpfxex Dwqfe Aixjk

Condition: ready for operation (used), Siemens 6SL3210-1NE26-0UL0 SINAMICS Power Module 230 Version: B SN:T-F31912000116, used, normal signs of use, 100% functional, scope of delivery as per photos Dodpjxahbgofx Aixeck

Condition: ready for operation (used), Baldor 37F716Y224 Motor SN: F695 - 230 / 460V - 60Hz, used, normal signs of wear, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Dcjdpeur A Thsfx Aixek

Condition: ready for operation (used), Contraves CG 112M 12 BF1 motor, drive shaft diameter: 38mm, mounting hole spacing: 152x152mm, used, 100% functional. ATTENTION: Please request a separate quote for packaging and shipping costs! Dcodpfx Aoi D Hpgoixsk

Condition: ready for operation (used), Heidenhain UR 230 ID 362593-02. The costs listed cover only the repair analysis of your component, which you can send to us. Once we have inspected your component, you will receive a quotation with the actual repair costs. If you approve the repair, the analysis fee will be waived. As part of the repair process, your component will be completely overhauled and comes with a 3-month warranty from us. Dsdpfx Aioy Nrhxjxock

Condition: ready for operation (used), SEG PSY2-FU-230-CB, serial number as shown in the photo, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Dsdpfxji Ec Nve Aixjck

Condition: excellent (used), Catalogue number: 7889 TECHNICAL DATA track width: 230mm Dsdpfxezlp Rte Aixsck shaft width: 230mm max blade diameter: 350mm / 400mm blade bore diameter: 80mm max cutting height with 350 / 400 blade: 115mm / 150mm table width (with clearance): 1200mm table length: 1900mm – from above: lock/blockers drive shaft, toothed shaft with saw blades 2 sliding/pressure rollers – from below: guide lock/blockers track 2 sliding rollers in the table feed speed adjustable manually feed motor approx. 2.2kW main motor: 30kW extraction nozzle diameter: 200mm overall dimensions (L/W/H): 2700x1800x2000mm weight approx.: 3000kg ADVANTAGES – Czech production – used multisaw – DTR technical documentation – very good condition Net price: 22,900 PLN Net price: 5,450 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Cnc rotary table, Nikken 5AX-230 4 and 5 axis for Mazak etc. was mounted on a VTC 300, due to new machine 5 axis now for sale, Djdpfx Aep U Umksixeck

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, The CD50 series of our high-pressure machines covers a pressure range of 230 to 2000 bar and a flow rate of 7 to 74 l/min. The pump is driven by a water-cooled 4-cylinder Toyota diesel engine. The fully enclosing frame is made of hot-dip galvanized steel to ensure a long service life and corrosion resistance. The frame is primed and then painted. The machine requires only a footprint of 1550 x 920 mm. Four rubber feet are mounted under the frame. In addition, the machine has forklift pockets and lifting eyes attached to all four corners. A galvanized roof plate provides protection and storage for high-pressure hoses, for example. Similar to, but not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Flow Rate CD50-230 230 bar 74 Lpm CD50-400 400 bar 40 Lpm CD50-500 500 bar 33 Lpm CD50-700 700 bar 25 Lpm CD50-1000 1000 bar 20 Lpm Dedpfx Aiohgbf Eexjck CD50-1250 1250 bar 15 Lpm CD50-1380 1380 bar 13 Lpm CD50-2000 2000 bar 10 Lpm General specifications: ----- Max. pump speed: 1160 rpm Drive engine: Toyota Diesel 4 cyl., water-cooled Drive engine power: 37.3 kW Drive engine speed: 1800 rpm Tank: 90 L Max. fuel consumption: 10.0 L/h Noise level (7m): 80 dBa Dimensions and weight: 1550mm x 920mm x 1250 mm (725 kg) Includes standard accessories.

Condition: new, driver cabin: other, gearing type: other, Other: * Trade-in and purchase of vehicles and machines possible. * Sales price excluding transportation and transfer. * No liability for printing & typing errors. * Errors, changes and prior sale reserved. * Offer subject to change. * Photos may differ. Price applies to existing condition. * All information without guarantee. Dcsdpfozlgxzjx Aixok - .