Used Chainstitch-Multi-Needle Quilter Mammut for sale (5,794)

Year of construction: 2017, condition: ready for operation (used), Max. load: 50kg, min. pick up height: 700mm, max. dropping height: 1800mm, stroke: 1100mm, the machine was hardly used, with bottom plate and documentation, without spare parts. Fpodel I Ewfopfx Aivjn

Year of construction: 2000, condition: ready for operation (used), 3 Dilo needle looms are offered. 1) Pre-needling and finish-needling machine Dilo, DILOOM OD-II HVL 55, year of manufacture: 2000, number of needle boards: 2, working width: 5500mm, max. stroke frequency: 1000strokes/min, needle beam stroke: 60mm, needle board width: 200mm each, needle distribution range: approx. 3000-5000needles/m. 2) Double needle loom Dilo, DI-LOOM OUG-II S50, year of manufacture: 2000, working width: 5000mm, number of needle boards: 4, needle beam stroke: 60mm, max. stroke frequency: 1200strokes/min, needle density: approx. 18000needles/linear m. 3) Pre-needling and finish-needling machine Dilo, DI-LOOM OD II 55, year of manufacture: 1998, working width: 5500mm, needling system: Downstroke, number of needle boards: 2, needle beam stroke: 60mm, max. stroke frequency: 1200strokes/min, needle board width: 200mm each. Inspection possible by appointment. Fjdpszhntrofx Aivjpn

Year of construction: 1977, condition: ready for operation (used), Dimensional range: M6-M14, length range: 110mm, number of strokes min./max.: 110strokes/125strokes/min, max. wire diameter: 15mm, slide stroke: 160mm, pressing force: 100t, oil capacity: 70l, oil type: CLP 68, clutch manufacturer: Ortlinghs, air consumption at 30 operations/min: 800l/min, weight: approx. 23000kg. Fpjdpfjt Nhmhsx Aiven

Condition: ready for operation (used), Year of construction: 1997, A Mori-Say 6/32M multi-spindle curve lathe is available. Number of spindles: 6, max. spindle speed: 3750 rpm, max. bar diameter: 40mm. Dimensions X/Y/Z: approx. 6200mm/1600mm/2050mm, weight: approx. 9500kg. Fodpfx Aietqfq Rsvspn

Condition: good (used), Cutter knife, dicer, multi-purpose cutter, slicer and portion cutter, cutter knife, cutter knife, dicer -Manufacturer: Holac, knife holder for meat cutter multi-purpose cutter dicer -Type: Mounting Ø 43 x 100 mm -Design/Dimensions: see photos -Dimensions: 420/436/H100 mm Fpsdpfx Aijwy Ugleven -Weight: 20.9 kg

Condition: good (used), Cutter knife, dicer, multi-purpose cutter, slicer and portion cutter, cutter knife, cutter knife, dicer, bacon cutter, gate, cutting gate -Manufacturer: Holac, cutting blade for meat cutter multi-purpose cutter dicer -Type: Mounting Ø 50 mm see photos Fpjdpfx Aowy Uigoivon -Bolt circle: Ø 75 x 6 mm -Price/Delivery: complete -Dimensions: 328/190/H8 mm -Weight: 1.2 kg

Condition: good (used), Touch screen, control panel, display, operator panel, PLC, Simatic Panel PC, touch screen, touch panel, Simatic Multi Panel, Touch Multi Panel -Manufacturer: Siemens, Simatic Multi Panel with control lamp and brackets -Type: 6AV6 643-0DD01-1AX1 Fpodpetpyq Refx Aivjn -Dimensions total: 700/1450/H275 mm -Weight: 44 kg

Condition: used, functionality: fully functional, total length: 2,750 mm, total width: 1,650 mm, total height: 2,630 mm, overall weight: 1,800 kg, The GEA Multi Former MLF 400 is a state-of-the-art machine designed to shape a wide range of food products with precision and efficiency. Thanks to its advanced technology, it guarantees fast, uniform production, ensuring high output while maintaining consistent product quality. In fact, this former is ideal for products such as dumplings, hamburgers and patties, with a flexibility that easily adapts to different types of raw materials. What's more, the GEA Multi Former MLF 400 is designed to maximize production efficiency, while minimizing material waste. Moreover, its intuitive, ergonomic operation makes it easy to get to grips with, reducing downtime. What's more, this machine is built to meet strict hygiene and safety standards, making it easy to maintain and guaranteeing clean, continuous production. Fpedpfx Aisu E Rgksven In short, the GEA Multi Former MLF 400 is a reliable, high-performance solution for food companies seeking to optimize their manufacturing processes while ensuring consistent, high-quality results. Technical specifications: Type: 400 MLF Hopper capacity: 320 L Maximum forming weight: 1.1 Kg. Maximum output: 65 cp/min. Belt speed from 1.5 to 15 m/min. Output height from 1015 to 1143 mm. Machine weight: 1800 Kg. Power: 23 kW. Air supply 6 bar, 300 L/min. Water supply: 4 bars. Noise level 84.5 db. Dimensions (L x W x H) : 2752 x 1652 x 2636 mm PLC programming.

Condition: used, WD Edger: - Motor power 55 kW - Two movable sleeves - Sleeve length 60 mm - Max saw blade diameter 400 mm - Hydraulic saw blade spacing - Four lower feed rollers - Two upper feed rollers Fpedpfx Aijxuipbsvon Centering roller table: - Total length 7000 mm - Total width 160 mm - Five lower feed rollers - Roller diameter 160 mm - Length 1000 mm - Four upper hydraulic hold-downs - Six centering material clamps - Hydraulic feed

Condition: used, functionality: fully functional, machine/vehicle number: C-E9C45191, Simatic Multi Panel 377 12" Touch by Siemens E-Version: 13 Input voltage: DC 24V / max. 1.8A Display size: 12-inch touch screen Operating temperature: 0°C to +50°C Mounting: Vertical Weight: 3.5 kg The Simatic Multi Panel 377 12" Touch by Siemens is a user-friendly and versatile operator panel that enables intuitive control and monitoring of industrial plants. Fodpjw Dfr Tsfx Aivjpn Its clear touch display provides a concise overview of key information, making interaction with complex control systems straightforward. This panel is engineered to operate reliably in demanding industrial environments and ensures efficient operation.

Condition: good (used), Multi-purpose winch, cable winch, lifting winch, assembly winch, rope winch, universal rope winch -Manufacturer: Tirfor winch, multi-purpose winch type TU 32 with steel cable -Load capacity: 3200 kg -Steel cable: Ø 16.3 mm / Length 30 m -Number: 2x cable pull available -Price: per piece -Dimensions: 680/170/H340 mm -Total weight: 65 kg/set Fpodpfx Asw D Ai Asivsn

Condition: used, mileage: 18,500 km, power: 315 kW (428.28 HP), first registration: 04/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, total width: 2,550 mm, total height: 3,650 mm, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal number: #423 Mercedes-Benz Actros 2543 L 6x2 / FFG Elephant Multi 11.003 MSR Water Recovery Vehicle Body by FFG Umwelttechnik, Flensburg * Tank material S355J2+N * Combined high-pressure jetting and vacuum suction vehicle with water recovery * Permissible working overpressure -1 / 0.5 bar * Approx. 11,000 liter tank capacity (air volume) * Approx. 8,200 liter max. sludge volume * Approx. 6,600 liter max. water volume * Discharge with telescopic piston and three piston positions * Automated piston system with closed lid * Automatic water recovery Fpsdpfx Aowv Dgyoiven * FFG elephant comfort pro (CAN-Bus) control system * FFG elephant connect * Automatic water recovery Chassis: Mercedes-Benz Actros 2543 L 6x2 * TipMatic * 455 HP/335 kW * EURO 6 * Fuel capacity approx. 290 l * Chassis color: Novagrau * Cab color: MB 9147 Arctic White * Air conditioning * Navigation * Refrigerator * Multimedia cockpit Vacuum system Samson TruckMaster 2500 with approx. 2,200 m³/h * Water ring pump * Low-maintenance belt drive High-pressure system URACA P3-45 G60 * approx. 340 l/min. at 205 bar * Low-maintenance belt drive Hose reel system FFG Multifunctional Boom XL * Max. reach approx. 6,200 mm (telescopic) * Hydraulically swivels approx. 200° * Parallel guidance for high-pressure and suction hoses * High-pressure hose reel on tank top for 200 m DN 25 * Hose length measuring device DN 25 * Second high-pressure hose reel on the boom for 80 m DN 13 (hydraulic) * Suction hose reel for approx. 20 m DN 125 on tank top Special features for winter operation: HD system operable up to -10°C with heating * Hydraulic cable winch on boom * Tipable scrap bin * Vise * Brackets * Hand washing unit, heated * 7 work lights * 4 rotating beacons and LED flashers front and rear * Rear-view camera * Hose tray and enclosed equipment compartment * Heated wardrobe * Pressurized air connection for air filling * Various holders for tools and equipment Technical data GVW 26,000 kg * Unladen weight 18,700 kg * Length 8,670 mm * Height 3,650 mm * Width 2,550 mm For further detailed information and/or images, please contact us directly. You can find a large selection of more vehicles for SALE or RENT at: Changes, interim sale, and errors excepted. The buyer is obligated to independently verify the condition and equipment of the goods. Sale is exclusively subject to our Terms and Conditions and with exclusion of any guarantee or warranty.

Condition: used, mileage: 19,535 km, power: 335 kW (455.47 HP), first registration: 05/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, total width: 2,550 mm, total height: 3,650 mm, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ BUY ++ BUY ++ BUY ++ BUY ++ BUY ++ Internal Number: #374 Mercedes-Benz Actros 2546 L 6x2 / FFG elephant multi 11.003 MSR Water Recycling Unit FFG Umwelttechnik, Flensburg * Tank material S355J2+N * Combined high-pressure flushing and sludge suction vehicle with water recycling * Permissible operating overpressure -1 / 0.5 bar * Approx. 11,000 liters tank volume (air volume) * Approx. 8,200 liters sludge volume max. * Approx. 6,600 liters water volume max. * Emptying with telescopic piston and three piston positions * Automated piston process with closed lid * Control system FFG elephant comfort pro (CAN bus) * FFG elephant connect * Automatic water recycling Fjdpfxewv Dg He Aivepn Chassis Mercedes-Benz Actros 2546 L 6x2 * TipMatic * 455 hp / 335 kW * EURO 6 * Fuel volume approx. 290 l * Chassis color Novagrau * Cab color MB 9147 Arctic white * Air conditioning * Navigation * Refrigerator * Multimedia cockpit Vacuum system Samson TruckMaster 2500 with approx. 2,200 m3/h * Water ring pump * Low-maintenance belt drive High-pressure system URACA P3-45 G60 * Approx. 340 l/min at 205 bar * Low-maintenance belt drive Boom system FFG Multifunction boom XL * Max. outreach approx. 6,200 mm (telescopic) * Approx. 200° hydraulically swiveling * Parallel guidance of high-pressure and suction hose * High-pressure hose reel on the tank dome for 200 m DN 25 * Hose length measuring device DN 25 * 2nd high-pressure hose reel on the boom for 80 m DN 13 (hydraulic) * Suction hose reel for approx. 20 m DN 125 on the tank dome Special features hydraulic winch on the boom * Tilting scrap box * Vise * Brackets * Hand washing facilities, hot water * 7 work spotlights * 4 rotating beacons and LED flashing lights front and rear * Reversing camera * Hose storage and closed equipment box * Wardrobe, heated * Compressed air connection for foam filling * Various brackets for tools and equipment Technical data GGW 26,000 KG * Unladen weight 18,975 KG * Length 8,990 mm * Height 3,650 mm * Width 2,550 mm Chassis - Special equipment: Axle load - measuring device, axle load front axle 9.0 t, audio system: digital radio DAB / DAB+, right exterior mirror with maneuvering position, battery 220 Ah, cockpit multimedia interactive, driver assistance system: high beam assistant and cornering light, suspension: front springs 9.0 t, 3 leaves, fire extinguisher, windshield tinted with band filter, vehicle without trailer brake, vehicle without trailer coupling, generator 150 A, transmission 12-speed - type: G 330-12, transmission lock independent of the transmission, rear axle bevel gear 300, fender 3-part, fender 3-part with splash guard, cool box / refrigerator, air compressor 2-cylinder, engine brake reinforced, trailing axle 9 t steered, unladen, auxiliary drive independent of the transmission and dependent on the clutch MB 1.2, auxiliary drive MB 131-2c, parameterizable special module, frame overhang 1650 mm, rain sensor, reversing warning acoustic and warning flashing light (warning signal outside), key with remote control additionally (2), fuse box, seat cover / upholstery: passenger seat velour, seat cover / upholstery: driver's seat velour, seats in the cab: armrests on both sides passenger seat, seats in the cab: passenger seat comfort suspension seat, seats in the cab: driver's seat comfort suspension seat, sun visor outside, steel rims 11.75x22.5 (on front axle), socket 24V / 25 A in the passenger footwell, socket 24V in the passenger footwell additionally, steep shoulder rims 11.

Condition: used, Year of construction: 2015, Technical details: number of spindles: 6 spindle passage: 22 mm ?Bar feeder complete is 4.70 meters - for 3 meters of material ?The machine is still on ?Materail to be processed on the machine: Steel ?Production with OIL Machine has only Single-NCU without PCU. The complete energy supply of all 6 main spindles was replaced in April 25. No socket for powered tools! Fsdpfx Ajxc Idmjivopn *

Condition: good (used), Year of construction: 1995, Multi-blade saw in very good condition. Chain width: 350 mm, with spikes. Maximum cutting height: 120 mm. Motor power: 22 kW. Fpjdpfezlk Umsx Aivon

Condition: used, mileage: 637,000 km, power: 375 kW (509.86 HP), first registration: 08/2021, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 08/2026, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * Volvo FH500 6x2 BDF Multi interchangeable frame * Euro 6d * I-Shift transmission * Retarder * ACC (Adaptive Cruise Control) * Lane keeping assist * Collision warning system * Globetrotter cab * Air suspension * Steering axle * 2x trailer coupling * Automatic climate control * Auxiliary air conditioning * Auxiliary heater * Refrigerator compartment * Heated seats Fjdpfxozqxtze Aivjpn * EFH (Extended Fifth Wheel Height)

Condition: used, Year of construction: 2025, functionality: fully functional, Equipment: CE marking, Holz-Her Edgebanding Machine SPRINT 1329 Multi with motorized pressure beam PUR & EVA adhesive (up to 60mm) with the NEW GLU JET GJ725 PUR PRO including vacuum pump motorized infeed guide rail guide for narrow parts edge trimming IntelliSet - tool correction fa.s.t. - setup in the gap + remaining length display of the edge band roll iTronic - pressure & adhesive quantity control automatic chain lubrication second workpiece discharge + air cushion table in the infeed area fully motorized equipment for all units multifunction milling - radius 1.3mm (2x) & 2mm (2x) + nesting package, vertical, bottom spraying devices + padding unit with texture finish for normal applications and structured surfaces and more The machine is currently being refurbished at the factory in Voitsberg / Austria. Completion: approximately October / November 2026 Delivery, installation and training for the machine can be arranged directly through us for an additional fee. Fsdpfx Aiszx Ennevopn The machine is currently located in our delivery warehouse in Gratwein / Austria. In the event of discrepancies between the German version and a foreign language version, only the German version shall be binding. Our terms and conditions can be found on our website at holzher.de/de/agb.

Condition: used, functionality: fully functional, Raimann KR 450 multi-blade saw Track width: 470 mm Cutting width: 450 mm Cutting height: 110 mm Spindle diameter: 65 mm Bushing diameter: 80 mm Blade size: 250-300 mm Feed rate: 4-48 m/min Fpodpfozt Iavex Aivon Main motor power: 45 kW Material receiver with side discharge Material return to the operator

Condition: excellent (used), Track width: 300 mm Minimum length of workpiece: 390 mm Minimum width of workpiece: 12 mm Minimum height of workpiece: 8 mm Maximum width of workpiece: 950 mm Saw blade diameter: 350 mm Blade bore diameter: 70 mm Spindle speed: 4200 RPM Fodpozxxuzsfx Aivspn Main motor power: 35 HP (approx. 25.7 kW) Variable feed speed: 6–48 m/min Table dimensions: 1530 × 1100 mm Machine weight: 1800 kg Year of manufacture: 2008 Certification: CE

Condition: used, We offer for sale a reliable multi-blade single-shaft rip saw TOS Svitavy PWR 421, designed for efficient longitudinal cutting of wooden boards, slats, and timber elements. The machine is suitable for both softwood and hardwood processing and enables high productivity through the use of multiple saw blades. Key Features & Benefits Heavy-duty multi-blade rip saw Suitable for mass production cutting Processes both softwood and hardwood High accuracy and stable cutting performance Adjustable feed speed Designed for continuous industrial operation Technical Specifications Cutting System Fpsdpfx Ajzgtldjivjn Saw blade diameter: 250 – 450 mm Max. blade diameter: 450 mm Multiple blade configuration possible Material Capacity Min. material thickness: approx. 12 mm (14 mm depending on setup) Passage height depending on blade diameter: Ø450 mm: approx. 150–160 mm Ø400 mm: approx. 125–135 mm Ø350 mm: approx. 100–110 mm Ø300 mm: approx. 70–80 mm Ø250 mm: approx. 50–60 mm Minimum workpiece length: approx. 750 mm With additional roller (for lower cutting heights): min. approx. 500 mm Working Range Max. right-side cutting width: approx. 405 mm Left-side range: approx. 465 mm Total working width: approx. 870 mm Speed & Performance Spindle speed depending on blade diameter: Ø450 mm: approx. 3,300 rpm Ø400 / 350 mm: approx. 3,800 rpm Ø300 mm: approx. 4,450 rpm Ø250 mm: approx. 5,500 rpm Feed speed: approx. 4 – 40 m/min (adjustable) Drive & Power Main motor power: approx. 45 – 55 kW Feed conveyor motor: approx. 3.5 kW Additional motors: Pressure beam lifting: 0.55 kW Saw spindle lifting: 0.55 kW Blade adjustment: 0.18 kW Machine Construction Feed conveyor width: approx. 450 mm Working height: approx. 850 mm Solid industrial frame for vibration-free operation Operating Conditions Operating temperature: +5 °C to +40 °C Suitable for workshop environment Condition & Sale Terms Condition: Good working condition Reliable and proven industrial machine Dismantling and transport to be arranged by the buyer Advantages High productivity in longitudinal cutting Flexible configuration with multiple blades Suitable for a wide range of materials Durable and robust TOS Svitavy construction

Condition: used, Rolling bearings, ball bearings, SKF bearings, SKF, self-aligning bearings, roller bearings, needle bearings -Needle bearing: roller bearing -Inside: Ø 500 mm -Outer: Ø 549 mm -Width: 175 mm -Weight: 29 kg Fodpfx Aogaby Djivjpn

Condition: ready for operation (used), functionality: fully functional, power: 0.004 kW (0.01 HP), cutting height (max.): 250 mm, cutting width (max.): 450 mm, saw blade diameter: 400 mm, overall weight: 7,500 kg, Two-shaft multi-saw 2x110 kW TOS SVITAVY PWR 422 - Czech production - twin-shaft - DTR documentation TECHNICAL DATA: - max cutting height: 250mm - track width: 450mm - shaft width: 450mm - disc bore diameter: 80mm - shaft diameter: 60mm - min disc diameter: 300mm - max disc diameter: 400mm - max width of input material: 860mm - min length of processed material: 1500mm * From above: - Rejectors: + - Drawing shaft, metal pneumatically pressed: + - rejects: + - drawing shaft, metal, pneumatically pressed: + - pressure: + - saw shaft: + - pressure: + - 2 pulling shafts, metal pneumatically pressed: + Fpedpfori Nvvex Aivon * Bottom: - metal roller, sliding: + - guide: + - rejects: + - track: + - saw shaft: + - track: + - infinitely adjustable feed speed on inverter: 4-40m/min - main motors: 2x110kW - feed motor: about 3kW - electric lifting of the body up/down: 0,55kW - electric adjustment of saw shafts: 2×0.18kW - central lubrication - diameter of the extraction stub: 2x300mm - dimensions L/W/H: 3400x2650x2200mm - weight approx: 7500kg

Year of construction: 2008, condition: good (used), machine/vehicle number: 431808, Lg.No. 18177 Hydr .flat profile and bar shear with notching device and hole punching machine Technical data: - Flat steel shear cuts up to 375 x 10 mm - 220 x 20 mm - section steel shears - cuts L-steel at 90° up to 130 x 13 mm Fpjdpfxjmidyis Aivon - steel bar shears - cuts round steel up to 45 mm - square steel up to 45 mm - notching device - with square notcher 100 x 42 x 10 mm - punching machine - punching force 600 KN - with stop table - throat 300 mm - punching in steel up to 28 mm Ø in 15 mm - or 34 mm Ø in 12 mm - manual length stop - drive 400 V / 4 kW - space requirement approx. W 600 x H 1550 x D 1500 mm - weight approx. 1300 kg

Condition: good (used), Year of construction: 1984, Multi-spindle head, multi-spindle drill head, drilling gear Fpsdpfx Asdym D Tsivsn -Joint multi-spindle head -Max. x drill -7x drill built-in collet: mm -min. Distance drill: mm -Weight: 11.3 kg Articulated multi-spindle heads are: variable tools for various machining operations such as drilling, thread cutting, countersinking, reaming, milling, turning, with which several holes can be machined at once.

Condition: good (used), Residual current circuit breaker (RCCB), motor protection switch, reversing switch Fsdpjb A R Hbjfx Aivepn -Type: multi-STOTZ F272/6 Price: per piece Quantity: 25 available -Weight: 0.5 kg