Used Bema Bale Press for sale (12,581)

Condition: ready for operation (used), Year of construction: 2009, operating hours: 8,500 h, functionality: fully functional, fuel: diesel, IDROMEC 650 diesel engine plus generator, ready to use Hnedpjyg Hcdefx Aagol

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,400 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 75 kW (101.97 HP), year of last overhaul: 2025, volume flow: 300 m³/h, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport dimensions 8500 x 2450 x 2950 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Hnjdpfey R Nnfox Aagel Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see the video for the machine function test. Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available.

Condition: used, High-performance baler MACFAB - BEMA type 650A Hydraulic press for packaging waste, recyclable renewable raw materials, secondary raw materials Manufacturer no. MF J0162 Year of manufacture 2021 Pressing force 50 tons. Press plate stroke approx. 1000 mm Cycle time per stroke approx. 40 sec. Pressing chamber floor area 1500 x 1100 mm Pressing chamber height 1650 mm Filling opening 1500 x 870 mm Filling height approx. 1250 mm Bale format 1500 x 1100 mm Bale height max. 1100 mm Hydraulic operating pressure 200 bar Motor power 5.5 kW Mains connection 400 volts, 50 Hz, 12 amps. - with two hydraulic cylinders - Door locking via threaded spindle with handwheel - Pressing operation only with the pressing chamber door closed - 2-hand operation for hydraulic tipping of the finished pressed bale - Free space for manual strapping - Standard industrial bales of 1500 x 1100 x 1100 mm are produced - the highly compressed bale is automatically tipped onto a pallet - only 62 operating hours Space requirement L x W x H 2120 x 1350 x 3220 mm Height for transport with lowered hydraulic cylinders approx. 260 cm Weight 1.8 ton. The machine is in very good condition, as good as new. Hnedpsvq Rtkjfx Aagsl The press has a new price of EUR 22,200 net at BEMA The BEMA company also buys the packaging waste that you press into bales with this press.

Condition: ready for operation (used), Year of construction: 2015, bale weight: 480 kg, Brand: HSM Model: V-press 860 plus Year of manufacture: 2015 Pressing force: 418 kN Voltage: 400 V Max. bale weight: 480 kg (depending on material) Bale dimensions: 120 x 120 x 78 cm Machine weight: 2083 kg Hodpfxoy Nizce Aagjnl Machine dimensions: 180 x 125 x 298.5 cm Feed opening dimensions: 120 x 65 cm Condition: Very good! Function tested. Video of the machine in operation available upon request. FLITS Rental & Sales service: With every machine, we provide a bundle of tying wire (120 wires). Need more bundles? Request a quotation without obligation.

Condition: ready for operation (used), Year of construction: 2012, pressing force: 40 t, Manufacturer: HSM Model: HL 4010 Year of manufacture: 2012 Hedox D U N Sepfx Aagjnl

Condition: used, Year of construction: 1988, operating hours: 1 h, machine/vehicle number: V 516, total width: 2,000 mm, total length: 7,000 mm, total height: 1,800 mm, operating pressure: 300 bar, pressing force: 90 t, sheet thickness aluminum (max.): 5 mm, power: 11 kW (14.96 HP), empty load weight: 16,000 kg, cutting force: 90 t, year of last overhaul: 2025, Bale size 400x400 mm Force 1 Step 900 KN Force 2 Step 900 KN Steel max. 2500-3500 Kg/Std. Aluminium max. 2000 - 3000 Kg/Std. Driving Power 11 KW Arrangement Surface 7x2x2,5 m x m Machine weight 16 to Hnsdpfx Aaolhqd Rsgel Place: Austria Aviable: 30.01.2025

Condition: good (used), Manufacturer: Comp Tip: SB5 Engine: 2,2 KW Cylinder stroke length: 500 mm Hnjdeh Eic Aepfx Aagel Chamber size: 500 x 350 x 400 mm

Condition: used, Year of construction: 2012, pressing force: 4 t, HSM V-Press 504 waste paper baler - used The HSM V-Press 504 vertical baler is a compact yet extremely efficient device designed for pressing cardboard and plastic waste. Thanks to its robust construction, simple operation, and modern control system, this model is the ideal solution for manufacturing companies, warehouses, stores, and logistics centers where significant amounts of packaging waste are generated every day. The baler, manufactured by the German brand HSM, ensures reliable operation and a long service life. Hnedpjyim Ayefx Aagol Key advantages of the waste paper baler: 40 kN crushing force – effective waste compression, reducing volume by up to 95%. Efficiency and ergonomics – the crushing process starts automatically when the door is closed, and the piston returns to its starting position automatically. Modern control system – a microprocessor with a membrane keyboard and graphic text display ensures easy monitoring of the work process. Double door with lever – safe and convenient operation even with intensive use. Compact bales up to 60 kg – facilitate transport and storage of processed waste. Integrated bale ejector – increases operator safety and comfort. Energy-efficient operation – 1.1 kW motor allows for full functionality with low energy consumption. Stable, durable construction – guarantees reliability over a long service life. The offer applies to the HSM V-Press 504 waste paper baler: • Product code: MTP006524 • Product condition: used • Year of manufacture: 2012 • Model: V-Press 504 • Width: 102 cm • Depth: 81.5 cm • Height: 193 cm • Weight: 290 kg • Power: 1100 W • Voltage: 230 V Net price: €2,859.00 per unit * I have large quantities available, with the possibility of negotiating the price for larger orders. * Transport possible throughout Europe. * The above offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1100 x 965 mm capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm column travel -side 800 mm ram adjustment 20 mm power capacity 80,0 + 5,5 kW weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Hsdpevuuknofx Aagsnl Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, stroke length: 200 mm, operating speed: 50 mm/s, reverse speed: 180 mm/s, table length: 3,200 mm, total length: 3,915 mm, total width: 1,605 mm, total height: 2,655 mm, overall weight: 8,000 kg, bending force (max.): 1,000 t, bending angle (max.): 90 °, warranty duration: 24 months, working height: 450 mm, All-Electric Servo Bending Machine Nominal force(KN): 1000 Slider stroke(mm): 200 Throat depth (mm): 360 X-axistravel(mm): 600 R-axistravel(mm): 200 Z-axistravel(mm): 2500 🔹 Smart CNC System – SL100-P with high-end algorithms and 12-inch touchscreen for intuitive operation. 🔹 High-Precision Structure – Finite element analysis (FEA), annealed, and one-time machining for long-term stability and accuracy. 🔹 4-Axis Intelligent Backgauge – AC servo-driven, high-speed positioning with automatic collision avoidance. 🔹 Precision Compensation System – Adjustable convex strips & fine-tuning mechanism for optimal bending accuracy. 🔹 Powerful & Durable Drive – High-torque servo motor, heavy-duty ball screws & sealed protection for longevity. 🔹 Fully Closed-Loop Control – Y1/Y2 magnetic scale feedback, positioning accuracy ±5μm. 🔹 Optimized Electrical System – Closed electrical box, heat dissipation, & neat wiring for reliability and easy maintenance. 🔹 Imported Precision Components – Ball screws & linear guides ensure accuracy without stroke compensation. Hedpfx Aev Hchloagsnl 🔹 High precision, stability, and smart automation – designed for professional sheet metal bending!

Condition: ready for operation (used), functionality: fully functional, In this offer you purchase a used colour production system ‘Xerox Versant 180 Press’ Object of sale: 1 x Xerox Versant 180 with the following equipment: incl. Fiery Server EX180 incl. Paperdeck A-CF03 incl. Booklet Finisher A-FN13 Hnsdpfsu Ra Smex Aagsl Not the right equipment? It is no problem to configure the machine according to your wishes. Please feel free to contact us! Counter readings: Total: Approx. 4,419,328 pages Colour: Approx. 3,524,210 pages Black: Approx. 895,118 pages Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test printout can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: new, Year of construction: 2023, For enquiries regarding the attachment, Mr. Herden will be happy to assist you (by telephone). Bema 20 BK Sweeping Machine / from Kramer 5040 / Year of manufacture: 2023 / New unit / in stock & immediately available Price: €5,990.00 net / €7,128.10 gross - Working width: 1,250 mm - Own weight: 348 kg - Max. flow rate (l/min): 80 - Max. operating pressure (bar): 180 - Carrier vehicle hydraulic minimum output: 20 l/min - Debris container capacity / weight: 135 l / 60 kg Equipment: - Water spray system (main rotary brush, side brush) - Side brush - Hydraulic debris container We have a very large selection of various attachments in stock, available for immediate delivery! Mr. Herden will be happy to assist you (Tel.). Upon request, we are happy to provide you with a financing offer. We are official sales and service partners for DMS. We are official sales and service partners for Gierking GMT. We are official sales and service partners for Holp. We are official sales and service partners for OilQuick. We are official sales and service partners for Westtech. We are official sales and service partners for Weber MT. We are official sales and service partners for Magni telescopic handlers. We are official sales and service partners for Seppi M. We are official sales and service partners for JCB construction machinery. We are official sales and service partners for Mercedes-Benz. We are official sales and service partners for Iveco. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. !!Errors and prior sale excepted!! Internal ID: 110181 = More information = Hnsdpoyii Ursfx Aagol Application: Grounds maintenance Unladen weight: 348 kg Working width: 125 cm Please contact Marius Herden for further information.

Condition: new, Year of construction: 2023, For enquiries regarding this attachment, please contact Mr. Herden (by phone). Bema 20 BK Sweeping Machine / Year of Manufacture: 2023 / NEW unit / in stock & immediately available Price: €5,990.00 net / €7,128.10 gross - Working width: 1,250 mm - Own weight: 348 kg - Max. flow rate (l/min): 80 - Max. operating pressure (bar): 180 - Carrier vehicle hydraulic minimum requirement: 20 l/min - Sweeping container volume / weight: 135 l / 60 kg Equipment: - Water spray system (main brush roller, side brush) - Side brush - Hydraulic dirt collection container We have a large selection of different attachments in stock and ready for immediate delivery! Mr. Herden (phone) will be happy to assist you. Upon request, we are also happy to provide a financing offer. We are an official sales and service partner for DMS. We are an official sales and service partner for Gierking GMT. We are an official sales and service partner for Holp. We are an official sales and service partner for OilQuick. Hjdpfxsy Nv Eus Aagsnl We are an official sales and service partner for Westtech. We are an official sales and service partner for Weber MT. We are an official sales and service partner for Magni telehandlers. We are an official sales and service partner for Seppi M. We are an official sales and service partner for JCB construction machinery. We are an official sales and service partner for Mercedes-Benz. We are an official sales and service partner for Iveco. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. !!Errors and prior sale excepted!! Internal ID: 108944 = Additional information = Intended use: Site management Working width: 125 cm For further information, please contact Marius Herden.

Condition: used, Year of construction: 2025, total length: 1,450 mm, total width: 800 mm, total height: 2,200 mm, Empty weight: 970 kg Price: On request Hjdpfx Aaew N Su Dogsnl Movable Press-Cylinder - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Operating hours: 0 - Drive system: Conventional - Press model: C-Frame press - Press force [ton]: 100 - Max. stroke [mm]: 380 - Table length [mm]: 1500 - Table width [mm]: 300 - Ram length [mm]: 100 - Throat depth [mm]: 1100 - Height adjustment [mm]: 750 - Motor power: 3.0kW - Transport dimensions: 1450mm x 800mm x 2200mm (l x w x h) - Transport weight [kg]: 970kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2025, total length: 1,100 mm, total width: 800 mm, total height: 2,200 mm, Empty weight: 540 kg Price: On request Movable pressing-cylinder - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes Hnodpfxsw N St Ho Aagol - Operating hours: 0 - Drive system: Conventional - Press model: C-Frame press - Press force [ton]: 60 - Max. stroke [mm]: 380 - Table length [mm]: 1000 - Table width [mm]: 260 - Ram length [mm]: 100 - Throat depth [mm]: 750 - Height adjustment [mm]: 750 - Motor power: 2.2kW - Transport dimensions: 1100mm x 800mm x 2200mm (l x w x h) - Transport weight [kg]: 540kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2025, total length: 1,300 mm, total height: 1,400 mm, total width: 800 mm, Empty weight: 800 kg Price: On request - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: HB10011N2025006 - Operating hours: 0 - Control: Teach-in - Motor power: 4.0kW - Transport dimensions: 1300mm x 800mm x 1400mm (l x w x h) - Transport weight [kg]: 800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Hnedpfx Aaexixruogel VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2025, total length: 1,200 mm, total width: 800 mm, total height: 1,800 mm, Empty weight: 450 kg Price: On request - Year: 2025 - Documentation available: Yes Hodpfx Aasxixrhsgenl - CE marking present: Yes - CE certificate present: Yes - Serial number: PB12093N2025005 - Operating hours: 0 - Drive system: Conventional - Number of rolls [pcs.]: 3 - Power [kW]: 1.5 - Shaft diameter [mm]: 155 - Capacity diameter round [mm]: 50 - Transport dimensions: 1200mm x 800mm x 1800mm (l x w x h) - Transport weight [kg]: 450kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2017, Overview  This robot palletizer system was manufactured in 2017 by Italy BEMA. The system is designed for palletizing Bag-in-Box products (5L and 19L) for water and syrup applications. It consists of a robot palletizing system with Fanuc control, pallet magazine and stretch wrapper. The machine was in service until September 2025 and is currently stopped, still installed, with energy disconnected. The system is fully operational, is available immediately, and can be visited on request. Maintenance was carried out twice per year. Technical data  Capacity: 5L BIB: 650 BIB/h – 7 pallets/hour 19L BIB: 420 BIB/h – 13 pallets/hour Formats: 5L / 19L Bag-in-Box Application: Palletizing of water and syrup products Configuration: Robot palletizer with Fanuc R-30iB system, pallet magazine, stretch wrapper Scope of Delivery  Robot palletizer | BEMA | FANUC R-30iB | 2017 | Palletizing robot system Stretch wrapper | BEMA | SILKWORM LS | 2017 | Pallet stretch wrapping unit Pallet magazine | 2017 | Pallet handling system Tooling set | 2017 | 2 tools for 5L and 19L BIB Hodpeyyl S Esfx Aagenl

Condition: used, functionality: fully functional, With this offer, you are purchasing a used ‘Xerox Versant 180 Press’ colour production system. Item for sale: 1 x Xerox Versant 180 Press with the following equipment: Includes FreeFlow Server or Fiery Server Includes Paperdeck A-CF03 Includes Booklet Finisher A-FN13 Includes SquareFold Unit SQF-104 Not the right equipment? It is no problem to configure the machine according to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 267,310 pages Colour: Approx. 253,808 pages Black: Approx. 13,502 pages Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test print can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Hjdpfoxnlbmsx Aagonl Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: good (used), Year of construction: 2002, received a new control unit in 2019 for €14,000 Hnjdpfeykl Rzjx Aagel max. bending diameter: 63.5 mm smallest bending radius: 32 mm motor: 30 kW

Condition: ready for operation (used), Year of construction: 2002, Extruders and oil screw presses for soybean processing, obtaining oil and soybean cake. Hnsdpfotxinajx Aagol There are two extruders and two presses. One extruder and one press work in tandem and form a pressing line. The motor power of the press is 22 kW and the power of the extruder is 55 kW. the capacity of one line is 500-800kg/h The price refers to one line (exstruder+press)

Condition: used, functionality: fully functional, With this offer, you are purchasing a used ‘Xerox Versant 280 Press’ colour production system. Item for sale: Hnedsyludmspfx Aagjl 1 x Xerox Versant 280 Press with the following equipment: Includes E300 controller Includes A-CF03 paper deck Includes A-FN13 booklet finisher Not the right equipment? It is no problem to configure the machine according to your requirements. Please feel free to contact us! Meter readings: Total: approx. 557,431 pages Colour: approx. 430,279 pages Black: approx. 127,152 pages Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality A test printout can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: used, Year of construction: 1995, tube diameter 45 mm Hjdjyutr Uepfx Aagsnl wall strength 2 mm bending radius min. . mm weight of the machine ca. 1,7 t dimensions of the machine ca. 5x0,85x1,5 m sn 1765 Pipe length up to 4100 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, Year of construction: 2026, functionality: fully functional, The BTS-MF40 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 40 kg. The baling press impresses with its ease of use, safe operation, it is ideal for small material volume and producing compact and easy-to-handle bales. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 2 Ton Bale weight: up to 40 kg (material depending) Bale size: 600 H (var.) x 535 W x 460 D mm Machine size: 1756 H x 718 W x 644 D mm Machine weight: 187 kg Transport height: 1756 mm Loading aperture: 522 W x 490 H mm Cycle times: 20 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB Hnedpfsvahudox Aagjl User-friendly lever control Bale trolley for easy bale removal Retainers to prevent material spring back Reel holder for strapping rolls A quality product „Made in Europe“ Suitable for compacting Cardboard Plastic film and foils Cans and light sheet metal containers Canisters and light plastic containers Clothes Light valuable materials Optional Extras Machine colour RAL Can crusher insert AUTO compaction cycles Strapping rolls Power supply 380 - 400 V (3 phase) Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: new, Year of construction: 2026, functionality: fully functional, The BTS-MF40 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 40 kg. The baling press impresses with its ease of use, safe operation, it is ideal for small material volume and producing compact and easy-to-handle bales. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 2 Ton Bale weight: up to 40 kg (material depending) Bale size: 600 H (var.) x 535 W x 460 D mm Machine size: 1756 H x 718 W x 644 D mm Machine weight: 187 kg Transport height: 1756 mm Loading aperture: 522 W x 490 H mm Cycle times: 20 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Hnsdpfxju Iwgvs Aagel Noise level: 68 dB User-friendly lever control Bale trolley for easy bale removal Retainers to prevent material spring back Reel holder for 2 rolls of strapping A quality product „Made in Europe“ Suitable for compacting Cardboard Plastic film and foils Cans and light sheet metal containers Canisters and light plastic containers Clothes Light valuable materials Optional Extras Machine colour RAL Can crusher insert AUTO compaction cycles Strapping rolls Power supply 380 - 400 V (3 phase) Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor