Used Bear Spr4000 for sale (2,962)

Condition: used, Year of construction: 2011, A machining center from Schwäbische Werkzeugmaschinen in need of repair is offered. Travels X/Y/Z1/Z2: 400mm/500mm/425mm/425mm, Y tool-change position: 775mm, swivel axis Q: 180°, rotary axes: A + U, number of spindles: 2, spindle distance: 400mm, max. spindle speed: 17500rpm, spindle bearing diameter: 80mm, rapid traverse: 100m/min, max. tool positions: 232, tool interface: HSK-A63, max. tool diameter: 80mm, max. tool length: 300mm, max. tool weight: 10kg, Control: Siemens 840D. Motor of the C1 axis defective, W axis is defective. Replacement required. Machine dimensions X/Y/Z: 4350mm/7000mm/4000mm, weight: 14.5t. Documentation available. Inspection possible by arrangement. Bwjdpfx Adoz Irmto Ieu

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Lybra02, LYBRA EASY / 3 programs TECHNICAL DETAILS Diameter Ø 1,700 mm Height 2200mm Max. pallet dimensions: 1,200 x 1,200 mm Rotation arm using high resistance ball bearings Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations A positioning aid for correctly placing the pallet is included in the scope of delivery Safety bumper for collision protection Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 3 storable wrapping programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application Soft start cycle to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Bsdpsz Iprtsfx Ad Iswu Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Optionally available: FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE via electromagnetically braked roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2 kW / 6A - 1.75 kW / 8.5 A (with PRS / PS) Optionally available with a manual line formation. Other systems available immediately from the Ludwigsburg warehouse.

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Bedpfjvvkipjx Ad Iewu

Condition: new, SNFA E265 7CE1 DDL precision angular contact ball bearing (1 pair) ,unused in opened original packaging, 100% functional, scope of delivery as per photos Bwedpfx Asz Ac A Red Ieu

Condition: new, SNFA SEB110 7/9CE1 DUL precision ball bearing, unused in original packaging, 100% functional, scope of delivery as per photos Bwsdpez Ac Dnjfx Ad Iou

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 250 mm capacity 90 degrees: square 250 x 250 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 260 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm band speed 15 - 100 m/min dimensions of saw-band 3650 x 27 x 0.9 mm Control MEP CNC total power requirement 2.2 kW weight 1190 kg Fully automatic electro-hydraulic band saw, featuring additional operating modes: * semi-automatic * semi-automatic dynamic * manual Description: - Robust, fully automatic electro-hydraulic band saw (INDUSTRIAL grade) * MEP Direct control technology * User interface with intuitive 10" touchscreen display * Mechanical buttons for saw operating functions * Guarantees reliable, simple, and intuitive operation * Real-time monitoring of all cutting parameters Bwjdjz Albiepfx Ad Iou * Pivoting arm allows for convenient and safe operation * Display and logging of alarm and error messages * Massive data storage: up to 100,000 programs and 9,999 cutting sequences - Miter cuts in automatic cycle from 0° to 60° left - Semi-automatic, semi-automatic dynamic, and manual cycles * Miter cuts from 45° right to 60° left - Selectable manual or semi-automatic dynamic cycle * For performing cuts without programming - Protective enclosure for operator safety - Infinitely variable cutting speed regulation from 15 to 100 m/min * Via frequency inverter - Latest-generation hydraulic power unit * High performance with low energy consumption - Material feed via stepper motor and recirculating ball screw * Mounted on opposed ball bearings * Repeatable 600 mm single stroke for cutting any length - Saw head positioning and feeder movement via joystick - Automatic detection of the initial cut position - Manual band tension monitoring with display readout * Via electronic transducer - Automatic cutting load monitoring * Via a servo valve mounted directly on the cylinder - Coolant tank integrated into the machine base - Chip-clearing brush - Bi-metal saw blade for solid and profile material - Tools and operating instructions with spare parts list * Angularity = 2/12 degrees * Length accuracy = +/- 0.1 mm per feed stroke Manufacturer information – please note: If this saw is installed on a mains circuit equipped with a residual current device (RCD), the RCD must be universal-current sensitive (Type B) and rated at no less than 300 mA.

Condition: used, power capacity / kW volt / V ampere / A total power requirement / kW weight of the machine ca. / t required space / m Siemens 1FK6060-6AF71-1AH0 brushless servo motor, 3000 rpm, 6 Nm, with brake – in working order A second-hand, fully functional Siemens brushless servo motor from the 1FK6 series is for sale. Bwodpfjz Aldwex Ad Iju Manufacturer: Siemens Type: 1FK6060-6AF71-1AH0 Design: 3-phase brushless servo motor / synchronous servo motor Technical specifications: 6-pole servo motor Stall torque: 6.0 Nm (100 K) Rated speed: 3,000 rpm Form factor: IM B5 Protection class: IP64 Self-cooled Incremental encoder SIN/COS 1 Vss, 2,048 S/R Smooth shaft, tolerance N With holding brake Power and signal connection These specifications correspond to the Siemens data for the exact order number 1FK6060-6AF71-1AH0. The motor is in a used condition, consistent with its age, showing visible signs of wear, dirt and traces of oxidation/bearing wear on the housing. Please refer to the original photographs. The servo motor is in working order

Condition: excellent (used), ALP Personnel Lift Here we offer you an ALP personnel lift. ALP Personnel Lift PHCI 800 EU 1 Working height max. 8m, payload 140kg, for indoor and outdoor use. The ALP lift, model PHC800, is a particularly compact personnel lift that impresses with its extremely small footprint and lightweight construction. The transport dimensions are also compact, with a height of 1.98m and a width of only 0.77m, allowing the model to easily pass through a standard door. Despite this space-saving design, the PHC 800 offers high performance. The working height of the ALP lift PHC800 is 8m with a maximum payload of 140kg. The robust aluminum construction and the hot-dip galvanized chassis ensure enormous stability and maximum durability. Bwsdpfx Adozh U Rko Iou The PHC series, like all ALP personnel lifts, is available with either hand or foot control and can be used flexibly both indoors and outdoors. Developed and manufactured in accordance with applicable safety regulations, all PHC lifts also bear the CE mark. Areas of application: The ALP personnel lift PHC 800 can be supplied with various accessories and is therefore specifically suitable for different areas of application. Working height: 8.00 m Platform height: 6.00 m Payload: max. 140 kg Height: 1.98 m Footprint (indoor use): approx. 1.41 m x 1.39 m Footprint (outdoor use): approx. 2.43 m x 2.28 m Weight: approx. 280 kg Maintenance platform for 1 person: ALP PHCI 800 Approved for indoor and outdoor use Version EU1 Drive / Motor: Single-phase AC electric motor 230V/50Hz 1.5KW Control: 12V/13V DC Power cable: 3x1.5 Protection class: IP 55 Type: PHCI 800 EU 1 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: new, Year of construction: 2026, sheet width 3100 mm plate thickness 9 mm pre-bending 6 mm diameter of upper rolls 220 mm diameter of lower rolls 200 mm side roll diameter 170 mm min. dia. 250 mm roll speed 6 m/min total power requirement 10,3 kW weight of the machine ca. 4651 kg dimensions of the machine ca. 4915 x 1120 x 1235 mm Features - Machines include the following DAVI standard specification: The components of the machine structure (machine stand, frame and swivel bearings, etc.) have been calculated and designed to withstand the loads required for the applications and performance levels. The robust and heavy-duty machine construction absorbs the loads generated during the bending process without transferring them to the foundation. - High-quality surface finish: For forming delicate surfaces and/or soft materials without leaving marks Hydraulic-mechanical parallelism system, supported by electronics for fine-tuning. There are two INDEPENDENT & SYMMETRICAL hydraulic circuits for the left and right cylinders of each roller. The oil flow is regulated by two DOUBLE PUMPS, which are mounted on the same motor shaft and are fully synchronised. The two symmetrical hydraulic circuits move the cylinders and supply the rollers with the SAME amount of oil in a fully synchronised manner. Electronic control is activated only for extremely precise fine-tuning. - Smooth transmission of the drive Both the hydraulic motors and the gearboxes (top and bottom) can follow the deflection of the roll without load when bending narrow sheets. This ensures perfectly symmetrical deflection of the rolls under load. This system also allows the rollers to deflect freely, without the risk of breakage under excessive load. - ‘Roll-by-Wire’© digital technology Since 2004, DAVI has revolutionised the way sheet metal rollers are wired (similar to ‘fly-by-wire’ technology in the aerospace, FMS and automotive industries) and introduced ‘Roll-by-Wire’ technology. This allows the entire control system of the roller to be controlled via digital signals rather than, as was previously the case, via numerous relays and contacts. Digital technology is much faster and more reliable. Action Benefit Reduction in the number -> Reduction in potential of components component failures Very compact design -> Improved accessibility for maintenance work Improved accessibility for -> Damaged parts can be identified maintenance work more easily More reliable -> Greater accuracy thanks to the use of ‘digital signals’ Permanent lubrication technology Bsdpfxez Dxpmo Ad Iswu The lever-arm feed system eliminates all linear friction during the movement of the side rollers, as the roller support arms, which house the bushings, rotate simply and smoothly around two large, strong pivot points made of alloy steel, ensuring precise and friction-free rotation. This guarantees reduced wear and safety during unlimited use. Further advantages of the lubrication-free lever-arm feed mechanism are: •NO daily maintenance required (lower operating costs). •More production time available. •The bearings are sealed to protect against scale, dust and rust - Hardened rollers •Excellent heat tre...

Condition: ready for operation (used), Year of construction: 2023, overall weight: 11,070 kg, total width: 3,850 mm, total height: 2,230 mm, cutting length (max.): 4,100 mm, product length (max.): 4,890 mm, table width: 494 mm, CNC shearing machine manufactured in 2023. This Durma VS 4006 features a cutting length capacity of 4100 mm and can handle a maximum sheet thickness of 6 mm for structural steel. It includes a powerful 11 kW motor and a rear stop/back gauge range of 1000 mm. If you are looking to get high-quality shearing capabilities, consider the Durma VS 4006 machine we have for sale. Contact us for further details. Bjdpfjz Dwqisx Ad Iswu - Cutting Length / Capacity: 4100 x 6 mm- Max. Sheet Thickness (Structural Steel): 6 mm- Max. Sheet Thickness (Stainless Steel): 4 mm- Work Area X / Cutting Length: 4080 mm / 4100 mm- Stroke: 165 mm- Stroke Rate: 10 - 20 per minute- Cutting Angle: 0.5 - 2°- Hold-down Force: 20 metric tons- Rear Stop / Back Gauge Range: 1000 mm- Rear Stop Speed: 200 mm/s- Motor Power: 11 kW- Voltage: 400 V- Frequency: 50 Hz- Current: 22 A- Intermittent Current: 32 A- Short Circuit Breaking Capacity: 10 kA- Lubricant / Oil Tank Capacity: 180 liters- Projection in Side Column / Throat Depth: 350 mm- Number of Support Arms: 3 pcs- Table Height: 820 mm- Control Unit: D-touch 7 CNC touchscreen control for rip fence, cutting angle, kerf, cutting length, and piece count- Additional Features: USB port, cutting line illumination, fold-up ball screw for rip fence, ball bearings in table, 1,000 mm fold-up finger guard, side stop with T-slots, tilting stop, scale, oil filling, rear light barriers

Condition: used, Year of construction: 2004, Continuous drying machine Manufacturer: Cefla Type: VN 2000/3/7500/300-24 Year of manufacture: 2004 Technical specifications - Total connected power: 23 kW - Usable width of the pallets: 1300 mm Bwsdoz A S Imjpfx Ad Iju - Usable length of the pallets: 7100 mm - Total number of pallets: 24 - Infeed/outfeed speed of the workpieces (adjustable via inverter): 2-20 m/min - Max. workpiece thickness: 200 mm - Max. load-bearing capacity per pallet: 150 kg Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: new, Year of construction: 2026, Machine with special rotor Advantages: + special rotor with reduced knife protrusion + Motor 22 kW + effective square knife * for pallets: up to 10 pallets per hour * depending on the sieve and material. With smaller residual wood, significantly more. Engine: 22 kW; 400 V - 50 Hz - 3 ph, Sieve: 15/20 mm hydraulically operated slide Current screen perforation (15/20 mm) * can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: The color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star / delta start - fast hydraulics - automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput Bwedpfxedv Eu Ho Ad Isu - cycle control to avoid idle times, - performance-increasing step control of the hydraulic slide, - Pertinax guides for hydraulic slides, - vibration-damping machine feet, - CE conform. The following options are available at an additional cost: - Additional row of knives + € 2,790 - segment bottom + € 6,890 (recommended for materials with a wall thickness thinner than 3 mm) - Special K-rotor storage + € 3,480 If necessary, consider shredding plastic with sieves smaller than 15 mm or with a lot of fines. If the bearings are lubricated with grease every approx. 4 weeks in operation, this is not necessary) - Raise the shredder by 30 cm (preparation for conveyor belt) + € 2.480 net - Angled conveyor belt (discharge height approx. 220 cm) + € 12.980 net - Overbelt magnet + € 5.980 net - Control conveyor belt and overbelt magnet + € 2.750 net (Start and stop synchronized with the hacker) - Exhibition hopper 1500x1500 mm + € 3.480 net Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, CNC Machining Centre – Horizontal | Brand: HÜLLER HILLE | Type: NBH 95 Year of manufacture: 2001 The machine can be inspected under power by prior appointment. Condition: In working order / ready for operation. TECHNICAL SPECIFICATIONS: Working area - X/Y/Z axes: 630/630/630 mm - Workpiece swivel range within the working area: Ø 750 mm - Spindle clearance above top edge of pallet: min./max. 150/780 mm Pallet - Pallet clamping area: 400 x 500 mm - Transport load per pallet: approx. 0,6 tons - Fixture height: 880 mm - Pallet changeover time: approx. 7 sec. NC rotary table (B-axis) - Smallest incremental step: 0,001 degrees - Positioning uncertainty A according to ISO 230-2: 0,003 degrees - Permissible torques on the clamped table: * Tangential torque: max. 3.200 Nm * Tilting torque: max. 4.500 Nm Working spindle / Gearbox headstock - Tool holder: HSK-A 63 - Diameter at front bearing: 80 mm - Drive power 100% duty cycle/40% duty cycle: 21/30 kW - Speed range: max. 16.000 rpm - Torque at 100% duty cycle / 40% duty cycle: max. 100/143 Nm Feed / Feed force / Rapid traverse - Feed range, X, Y and Z axes: 1 – 50,000 mm/min - Feed force, X, Y and Z axes, 40% duty cycle: approx. 10.000 N - Rapid traverse speed, X, Y and Z axes: 50 m/min - Rapid traverse of rotary table: 40 rpm Bedpfxoz Emp Ro Ad Ijwu - Acceleration: approx. 7 m/s² - Ball screw (pitch): Ø 40 (20) mm Tool magazine: - Tool positions: 144 - 2 additional tool cassettes, each with 47 positions - Number of tool loading and unloading stations: 1 - Tool diameter / max. tool diameter: 75 / 175 (200) mm - Tool length: max. 400 (450) mm - Tool weight: max. 12 kg - Magazine cassette load capacity (including cassette): max. 600 kg Electrical system - Total power requirement: 80 kW Machine installation - Space requirements, area: approx. 16,75 m², height: 3,2 m - Ready-to-use machine weight: approx. 13,5 tons ACCESSORIES / EQUIPMENT: - Control: Siemens SINUMERIK 840D - Chip conveyor - Additional equipment for automated production: MPS pallet storage system - Documentation - CE marking - ... Technical data sheet with full details, including information on the further features, available on request. No guarantee is given as to the completeness or accuracy of the technical specifications and specifications. – Subject to prior sale –

Condition: ready for operation (used), Year of construction: 2010, operating hours: 30,343 h, travel distance X-axis: 600 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis CHIRON Mill 2000 was manufactured in 2010. It features a Siemens 840D NC control and a robust main spindle motor by Siemens. The machine has a total of 3,129,425 tool changes, showcasing its efficiency in production. If you are looking to get high-quality machining capabilities, consider the CHIRON Mill 2000 vertical machining centre we have for sale. Contact us for further details. - Operating Hours (Main Switch On): 67,030 h 12 min- Operating Hours (Machine Fully Switched On): 45,945 h 26 min- Operating Hours (Automatic Production Mode): 30,343 h 56 min- Main Spindle Running Hours: 18,096 h 58 min- Total Tool Changes: 3,129,425- NC Control Manufacturer: Siemens- NC Control Type: 840D- Main Spindle Manufacturer: Fa. Chiron- Main Spindle Motor Manufacturer: Siemens- Main Spindle Motor Type: 1 PM 6105-2 LZ 84-9 EM 1-Z- 4th Axis Manufacturer: Fa. Peiseler- 4th Axis Type: ZAS160- 4th Axis Counter Bearing: Peiseler GP MK3- 5th Axis Manufacturer: Fa. Peiseler- 5th Axis Type: ZAS160- 5th Axis Counter Bearing: Peiseler GP MK3 - Substructure (Base Frame) Manufacturer: Hamül- Substructure (Base Frame) Type: L- Machine Structure Manufacturer: Chiron- Hydraulics Manufacturer: FMB- Hydraulics Type: 3116265- Cooling Unit (Chiller) Manufacturer: Hyfra- Cooling Unit (Chiller) Type: VWK90-D0- Central Lubrication Manufacturer: SKF- Central Lubrication Type: KAF1-M-W-S3+924- Control Cabinet Cooler Manufacturer: Rittal- Control Cabinet Cooler Type: SK3304142- Extraction System Manufacturer: Umwelttechnik 99- Extraction System Type: LCF-3000- Fire Extinguishing System Manufacturer: Total Walther- Fire Extinguishing System Type: (UE-03)K8- Coolant System 2 Manufacturer: Bürener Maschinenfabrik- Coolant System 2 Type: 001300000170- Chip Conveyor Manufacturer: Knoll- Chip Conveyor Type: 750K-1150/- X-Axis Motor Manufacturer: Siemens- Tool Magazine Chain Motor Manufacturer: Siemens- Tool Magazine Chain Motor Type: 1 FT 6034-4 AK 71-3 EA 1- Tool Magazine Linear Motor Manufacturer: Siemens- Tool Magazine Linear Motor Type: 1 FK 7063-5 AF 71-1 EH 2- Chip Conveyor Screw Motor Manufacturer: Bauer- Chip Conveyor Screw Motor Type: BS04-71V/D06LA4 Bwodpfx Aoz Eai Rod Isu

Condition: new, Year of construction: 2023, functionality: fully functional, measuring range X-axis: 600 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 300 kg, path measurement accuracy: 2 mm, overall weight: 435 kg, travel speed (max.): 30,000 mm/min, compressed air connection: 5 bar, Equipment: documentation/manual, type plate available, The COORD3 Benchmark 06.05.05 is a high-quality, CNC-controlled portal measuring machine (half-gantry type) designed for accurate 3D product inspection. The machine combines a stable mechanical structure with high measuring speeds, making it suitable for use in both temperature-controlled measuring rooms and controlled production environments. 𝗘𝘅𝗰𝗲𝗹𝗹𝗲𝗻𝘁 𝗰𝗼𝗻𝗱𝗶𝘁𝗶𝗼𝗻 (𝗗𝗲𝗺𝗼𝗻𝘀𝘁𝗿𝗮𝘁𝗶𝗼𝗻 𝗺𝗼𝗱𝗲𝗹): This CMM is in near-new condition. The machine has only been used as a demonstration model and therefore has seen very little use. There is no production wear, meaning the system is in absolute top condition, both mechanically and electronically. 𝗛𝗶𝗴𝗵 𝗽𝗿𝗼𝗱𝘂𝗰𝘁𝗶𝘃𝗶𝘁𝘆 𝘁𝗵𝗿𝗼𝘂𝗴𝗵 𝘁𝗵𝗲 𝗣𝗛𝟮𝟬 𝗺𝗲𝗮𝘀𝘂𝗿𝗶𝗻𝗴 𝗵𝗲𝗮𝗱: The machine uses the advanced Renishaw PH20 probe head. This head uses ‘head touches’ (fast pivoting movements of the head itself) instead of moving the entire machine axes. This results in a measuring cycle that is up to three times shorter compared to traditional systems. 𝗛𝗶𝗴𝗵 𝘁𝗵𝗲𝗿𝗺𝗮𝗹 𝘀𝘁𝗮𝗯𝗶𝗹𝗶𝘁𝘆 (𝟭𝟲 - 𝟮𝟲 °𝗖): Thanks to the optional multi-sensor temperature compensation system, the machine maintains its accuracy over a wide temperature range. This makes the CMM suitable for use near the production line without requiring a strictly temperature-controlled environment. 𝗗𝘂𝗿𝗮𝗯𝗹𝗲 𝗮𝗻𝗱 𝘀𝘁𝗮𝗯𝗹𝗲 𝗳𝗼𝘂𝗻𝗱𝗮𝘁𝗶𝗼𝗻: The machine bed consists of a solid granite table with integrated guides (flatness according to DIN876/III). Because all axes are equipped with air bearings, there is no mechanical friction or wear, which guarantees long-term repeatability. 𝗖𝗼𝗺𝗽𝗮𝗰𝘁 𝗮𝗻𝗱 𝗲𝗿𝗴𝗼𝗻𝗼𝗺𝗶𝗰 𝗱𝗲𝘀𝗶𝗴𝗻: The CNC controller and the PC are integrated into the machine's base. This saves valuable floor space in your workshop or measuring room. The monitor and keyboard are mounted on a flexible, pivoting operator arm. 𝗠𝗲𝗮𝘀𝘂𝗿𝗶𝗻𝗴 𝗿𝗮𝗻𝗴𝗲 𝗮𝗻𝗱 𝗰𝗮𝗽𝗮𝗰𝗶𝘁𝘆: The effective measuring volume is 600 mm on the X-axis, 500 mm on the Y-axis, and 470 mm on the Z-axis (reduced from 500 to 470 mm due to the physical design of the PH20 head). The robust granite table is designed to support heavy workpieces with a maximum product weight of up to 300 kg. 𝗛𝗶𝗴𝗵 𝘁𝗿𝗮𝘃𝗲𝗿𝘀𝗲 𝘀𝗽𝗲𝗲𝗱 𝗮𝗻𝗱 𝗱𝘆𝗻𝗮𝗺𝗶𝗰𝘀: The machine is equipped with a powerful NC drive via DC motors with backlash-free friction drive on steel guides for all axes. This results in an impressive maximum positioning speed of 30,000 mm/min (500 mm/s) and a maximum acceleration of 1500 mm/s², allowing measuring programs to be executed with minimal pauses. 𝗖𝗲𝗿𝘁𝗶𝗳𝗶𝗲𝗱 𝗺𝗲𝗮𝘀𝘂𝗿𝗶𝗻𝗴 𝗮𝗰𝗰𝘂𝗿𝗮𝗰𝘆: The machine's performance has been fully verified according to the strict international UNI EN ISO 10360-2 standard. With the PH20 measuring head, the system guarantees a path measuring accuracy (MPE) of 2.7 + 3.0L/1000 µm under optimal conditions (18-22 °C), and a maximum repeatability accuracy (MPL) of 2.5 µm. The maximum form measuring error of the probe (MPE PFTU) is 2.7 µm. Bwedpfx Adez Eh T Rj Iou 𝗜𝗻𝘀𝘁𝗮𝗹𝗹𝗮𝘁𝗶𝗼𝗻 𝗮𝗻𝗱 𝗰𝗼𝗻𝗻𝗲𝗰𝘁𝗶𝗼𝗻 𝗿𝗲𝗾𝘂𝗶𝗿𝗲𝗺𝗲𝗻𝘁𝘀: For the commissioning of this CMM, a stable compressed air supply is required with a minimum pressure of 5 Bar (71 PSI) and a constant air consumption of 90 Nl/min. The electrical installation is very simple and requires a standard single-phase power supply of 230 V (±10%) at 50 Hz. The total machine weight, including the base, is 435 kg (excluding PC peripherals).

Condition: ready for operation (used), Year of construction: 2012, spindle speed (max.): 3,000 rpm, travel distance X-axis: 630 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,585 mm, spindle motor power: 30,000 W, overall weight: 15,200 kg, controller manufacturer: FANUC, number of slots in tool magazine: 40, number of axes: 7, This 7-axis DOOSAN PUMA MX3100S was manufactured in 2012. It features an impressive maximum turning diameter of 760 mm and a turning length of 1,500 mm. The machine is equipped with a 40-tool Capto C6 automatic tool changer and offers high spindle speeds of up to 12,000 rpm. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA MX3100S horizontal turning machine we have for sale. Contact us for further details. • Bed: Cast iron with linear roller guides on all axesLeft spindle (main) • Spindle nose: ASA A2-11 • Chuck: Hydraulic 3-jaw, Ø315 mm • Max available power from: 238 rpm • Max torque: 1,003 / 1,203 Nm • Built-in spindle motor; front bearing Ø160 mm • Spindle bore: 115 mm; draw tube ID: 103 mm • C1 positioning: continuous/interpolated, 0.001° resolution, hydraulic spindle lockingRight spindle (sub) • Spindle nose: ASA A2-8 • Chuck: Hydraulic 3-jaw, Ø254 mm • Speed: 40–4,000 rpm • Motor power (low/high electronic range): 15/22 kW | 22/26 kW • Max available power from: 450 rpm • Max torque: 398 / 539 / 700 Nm • Built-in spindle motor; front bearing Ø130 mm • Spindle bore: 86 mm; draw tube ID: 77 mm • C2 positioning: continuous/interpolated, 0.001° resolution, hydraulic spindle lockingAxis travels • B (upper turret rotation): 240° (±120°) • A (right spindle translation): 1,550 mm • C1/C2 (spindle rotation): ±360°Rapid traverse / feeds • X1 / Z1 / Y: 36 / 36 / 26 m/min • A axis: 30 m/min • B-axis rotation: 42 rpm • C1 / C2 axes: 400 rpm • X1/Z1 interpolation feed: up to 500 mm/revOrientable upper turret / milling spindle • B-axis driven orientable head with Roller Gear Cam (RGC) • Machining on either left or right spindle • B-axis resolution: 0.001°; up to 4-axis simultaneous with FANUC 31i-A • Hirth mechanical locking: head orientation 5°; spindle orientation for multi-edge tools 30° • Spindle interface: Capto C6 (double-contact) • Speed: 60–12,000 rpm • Motor power (low/high electronic range): 10/15/18.5 kW | 15/18.5/22 kW • Max available power from: 1,500 rpm; max torque: 64 / 96 / 118 Nm • Built-in motor; air sensor for tool clamping confirmation • Centralized cooling system; rigid tappingAutomatic tool changer • Type: Floor-mounted, double-arm; long-Z movable magazine • Drives: Servo-driven tool-change arm and tool-chain rotation • Taper: Capto C6 • Tool change time: tool-to-tool 1.8 s; chip-to-chip 10 s • Max tool diameter: 130 mm (adjacent empty) / 90 mm (adjacent occupied) • Max tool length: 400 mmMachining capacity • Max swing over bed: 1,000 mm • Max swing over carriage: 700 mm • Max turning diameter from chuck: 670 mm (upper head at 0°) / 760 mm (upper head inclined) • Max turning length between centres: 1,500 mm • Max distance between spindle noses: 1,540 mm • Y-axis through-hole capacity: Ø230 mm (±115 mm) Bodpfxsz Eaz To Ad Iowu • Max bar capacity: left Ø102 mm; right Ø76 mm • Max unsupported workpiece weight: left 400 kg; right 220 kgCoolant and standard equipment • High-pressure coolant through upper spindle: 12 bar • External coolant to upper spindle: 8 bar • Coolant tank capacity: 580 litres • Automatic lubrication system • Centralized hydraulic system with high-efficiency cooler • Electrical cabinet with heat exchanger • Work area lighting; 3-colour alarm/status lamp • Installation equipment; CE conformity declarationFANUC 31i-A CNC features • 10.4" colour LCD; extended keyboard • Manual Guide-i conversational programming • Minimum programmable increment: linear 0.001 mm; rotary 0.001°

Condition: good (used), Year of construction: 2006, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment Bsdpfxjz Er T Uj Ad Iewu SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600

Condition: used, Year of construction: 1992, Technical details: sheet width: 4050 mm plate thickness: 16 mm distance between columns: 4900 mm control for program: Robosoft SC5 Controller back gauge: 1000 motorisch cutting angle: 0,5° - 3° ° cutting gap adjustment: ja / jes mm down holder: 23 Stück height over floor: 1030 mm Table dimensions: L x B 4000 x 520 mm weight of the machine ca.: 19,2 t dimensions of machine: 5,2 x 2,2 x 2,78 m characteristics: - knife length 4100mm, 4 turns possible - Number of strokes: 5 - 11 strokes/min. Bsdpeu Icpcefx Ad Iowu - Table: side stop with linear scale, with stop bar 1000mm removable, feed aid via / with ball bearings - front support: LxWxH: 1600 x 1100 x 1000 mm; movable over roller rail, easy handling - backgauge adjustable, motor driven and foldable Operation via control panel with jib lenmgth arm and foot control Equipment: - light grid at backgauge - cut line ilumination Accessories: - 1 set (2 pieces) shearing blades *

Condition: used, Year of construction: 1978, Technical details: table surface area: 1970 x 400 mm distance between table/spindle: min./max. 150 / 250 mm rapid traverse: 1 / 2 m/min revolution per minute: Frässpindel: 112 ... 1400 / 12 step U/min milling spindle taper: DIN 2019 = Nr. 40 (SK40) axial adjustment: manuell = 150 mm Bwodou Ndhiopfx Ad Ieu quill feed: 0,012 / 0,025 / 0,05 mm/U feed range - horizontal: Frässchlitten: 8...100 / 12 step mm/min total power requirement: ca. 8,4 (10,5 kVA) kW machine weight approx.: 3000 kg dimension machine xH: 3,05 x 2,7 x 2,0 m wedge-groove milling machine Application: Milling of straight and helical grooves. Multiple groove milling with automatic program sequence. Further features: - distance spindle axis / lower edge counterholder: 55 mm - axial movement of the counter bearing sleeve 50 mm - milling carriage movement horizontal 1000 mm (automatic + manual by hand) and vertical 100 mm by hand + max. 5mm automatic/hydraulic Equipment: - chip container 470x300x300mm - 2x oil collecting basins (3200x1500x70 and 3200x800x60mm) - some accessories/tools *

Condition: excellent (used), Year of construction: 2020, operating hours: 4,000 h, functionality: fully functional, CNC turning center Doosan Puma 700 XLY II Turning length: 5,050 mm Turning diameter: 700 mm with driven tools and Y-axis Basic equipment: - CNC control Fanuc 0i with Manual Guide i - 45" inclined bed in tubular construction - Main spindle with 4 bearings. Spindle bearing accuracy class P 4 - Lifetime lubrication - Internal clamping device hydraulically actuated with internal clamping cylinder complete with safety device, coolant collection tray, stroke control and draw rod - Automatic central lubrication - Tailstock programmable - Flat bed guides hardened and counter surface coated with Rulon 142 - Coolant system with 7 bar delivery pressure - Guide rail cover Z-axis - Full enclosure - Watertight work area lighting - Integrated alignment screws and mounting plates Including Doosan options: - Tailstock programmable (towed by the turret) - Oil skimmer - Coolant system with 14 bar delivery pressure - Electronic tool breakage monitoring - Automatic tool measuring arm - 3-color warning light - Clamping force monitoring - Additional handwheel - NC option Arbitrary Speed Threading - 2x Drilling & Milling head BMT 85 CC PRECI-FLEX; straight ER50 - 2x Drilling & Milling head BMT 85 CC PRECI-FLEX; angled ER50 - Preparation for programmable hydraulic steady rest (includes complete basic body, connected to open/close the steady rest via M-function and the basic body can be automatically positioned in the Z-direction, towed by the cross slide without the steady rest) Schunk ROTA NC 630-180 2520-Sv90" Chuck diameter 630 mm Manufacturer Schunk with involute gearing 90" incl. flange and draw rod adapter Steady rest RX6-ZSW-100520 50-SCUW-95 self-centering, hydraulic steady rest, sealed housing (proofline), measuring system for clamping range monitoring (SCU-V), integrated flushing channels / chip protection, flushing nozzles, extra compact design, integrated cylinder with pressure converter. Clamping range from 100mm to 520mm Brinkmann pressure boosting pump 30 bar incl. 50p Mahle filter approx. 30 bar, can be switched on via M-function incl. cartridge filter Coolant gun with its own pump Coolant gun for cleaning the work area when the door is open In automatic operation without function Hinged belt chip conveyor, discharge on the right, inclination angle 50 degrees, discharge height 1150 mm Bodpfx Aezlcyusd Iewu Chip cart Type SKM750; 0.75m3 volume; 1000kg load capacity; with rollers and forklift pockets

Condition: used, Year of construction: 2002, turning diameter 390 mm turning length 507 mm control MSG 805 MAPPS max. turning diameter 390 mm greates pass round over bed 680 mm Swing dia. over traverse guideway 510 mm centre distance 618 mm turning speed range - main spindle 45 - 4.500 min/-1 power capacity - main spindel 11 / 7,5 kW spindle bearing diameter 110 mm spindle bore 73 mm max. bar capacity 51 mm spindle nose JIS A2-6 chucking diameter 210 mm C-Axis 0,001 ° x-axis 235 (195+40) mm Bjdovzhiqepfx Ad Iswu z-axis 520 mm number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Spindle speed - driven tool stations max. 3.000 min -1 power capacity driven tool-stations 5,9 / 4,5 kW Shank height for square tool 25 mm Drill shank diameter max. 50 mm turret change time 0,2 sec. tailstock adjustment 490 mm dia. of quill 85 mm taper of center MT 4 quill stroke 120 mm rapid traverse X: 18 / Z: 24 m/min Tipp feed 0 - 1.260 mm/min total power requirement 30,1 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 5,0 x 2,5 x 2,5 m CNC - Turning- and Millingcenter MORI SEIKI - SL 204 MC

Condition: used, Tenoning spindle 1 St. Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig PC-Nexus Weinig Unicontrol 11 Window System with Extensive Tooling ----- Optionally available (at additional cost): - Weinig Univar 6 Rebating Machine (Price upon request!) - Götzinger PowerDrill Drilling and Milling Center for Windows and Doors (Price upon request) Manufacturer's Technical Description: ----- Item 1: Weinig Unicontrol 11 Window System ----- Includes existing tooling sets: - IV 67 (Wood and Wood-Aluminum) - IV 77 (Wood and Wood-Aluminum) - IV 90 (Wood) Cross-cut Saw ----- With laser alignment light; motor power: 3 kW; spindle diameter: 40 mm; electronically variable spindle speed with brake: 3,000–6,000 rpm. Max. tool cutting circle: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment: pneumatic, to 8 positions for top edge rounding Horizontal Bottom Rounding Unit ----- Motor with brake: 1.5 kW; Spindle diameter: 20 mm; Clamping length: 25 mm Spindle speed: 9,000 rpm Max. tool cutting circle: 130 mm Axial adjustment travel: mechanically coupled with cut-off saw Radial adjustment travel: pneumatically controlled Tenoning and Slotting Spindle ----- With hydraulically clamped outboard bearing Motor power with brake: 15 kW Spindle diameter: 50 mm Spindle speed: 2,800 rpm Max. tool cutting circle: 400 mm Tool clamping length: 640 mm Axial adjustment travel: NC axis Home position below table: 5–10 mm Radial adjustment travel: fixed 1st Profiling Spindle (Climb and Conventional Milling) ----- Motor power with brake: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Min. tool cutting circle: 140 mm; Max. tool cutting circle: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position below table: 5–10 mm 2 feed rollers opposite the spindle; axial adjustment pneumatically controlled (8 positions) Horizontal Top Profiling Unit ----- Bedpfx Aey T R Tujd Iowu Motor power with brake: 3.7 kW Spindle diameter: 40 mm Clamping length: 40 mm Spindle speed: 9,000 rpm Max. tool cutting circle: 130 mm Adjustment: pneumatic, to 8 positions (axial and...) radial 2. Profile Spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: min. 140 mm, max. 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm Indexed guide fence with muntin support strip 2 feed rollers (opposite the spindle); axially pneumatically controlled (8 positions) Vertical Profile Milling Unit (Right-hand side, at machine end) ----- Motor power (with brake): 3.7 kW Spindle diameter: 40 mm Clamping length: 160 mm Spindle speed: 5,850 rpm Tool cutting circle: min. 112 mm, max. 210 mm Adjustment: Pneumatic (8 positions—axial a...

Condition: reconditioned (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-30 m/min. control Powercom Bwedpfezp Rxyex Ad Isu Weinig Powermat 500 (Window Version for window producers) ----- The machine will be a partial renovated at our warehouse prior to delivery. The interior view photos of a similar machine from our archive serve to illustrate how the machine will be renovated. Technical Summary: ----- - 6 spindles, 5 of which are PowerLock - 8,000 rpm - Large PowerCom control system - Spindles 2, 3, and 4: CNC-controlled axial adjustment - Spindles 2, 3, 4, and 5: CNC-controlled radial adjustment - Window package for glazing bead separation: pneumatic cycling for right and top spindles for bead separation Detailed Description: ----- Tool arrangement no. 018 for window production Technical Data: ----- Working width: 20 – 230 mm (with tool cutting circle 93 – 125 mm) Working height: 8 – 120 mm (with tool cutting circle 93 – 125 mm) 1. Tool Spindle ----- First bottom spindle Diameter: 40 mm Motor with brake: 7.5 kW Speed: 8,000 rpm Tool cutting circle: 125 – 180 mm Tool cutting circle (rebate cutter): 130 – 160 mm Axial adjustment range: 17 mm Rebating device MarathonCoating for table insert before 1st bottom spindle 2. Tool Spindle POWERLOCK/HSK ----- First right spindle Motor with brake: 7.5 kW Speed: 8,000 rpm Includes high-performance ball bearings Tool cutting circle: 93 – 200 mm Maximum profiling depth: 35 mm Axial adjustment range (PowerLock): 55 mm Radial adjustment range: Min. tool diameter at fence level: 93 mm Max. tool cutting circle behind fence line 200 mm Right tool spindle: axial positioning (55 mm) pneumatically controlled via selector switch, max. saw blade diameter 180 mm CNC-controlled axial adjustment CNC-controlled radial adjustment 3rd tool spindle POWERLOCK/HSK ----- First left tool spindle Motor with brake 7.5 kW Speed ??8,000 rpm Includes high-performance ball bearings Tool cutting circle 93 – 200 mm Maximum profiling depth 35 mm Axial adjustment range for PowerLock 55 mm CNC-controlled axial adjustment CNC-controlled radial adjustment Pressure shoe in front of left tool spindle, incl. 2 spring-loaded lateral pressure rollers 4th tool spindle POWERLOCK/HSK ----- First top tool spindle Motor with brake 7.5 kW Speed ??8,000 rpm Includes high-performance ball bearings Tool cutting circle 93 – 200 mm Tool cutting circle for straight-knife cutterheads max. 163 mm Maximum profiling depth 35 mm Axial adjustment range 40 mm CNC-controlled axial adjustment CNC-controlled radial adjustment Top tool spindle: axial positioning (40 mm) pneumatically controlled via selector switch, max. saw blade diameter 180 mm 5th tool spindle POWERLOCK/HSK ----- Second top tool spindle Motor with brake 7.5 kW Speed ??8,000 rpm Includes high-performance ball bearings Tool cutting circle 93 – 200 mm Tool cut...

Condition: reconditioned (used), Working width 3500 mm Working height 2550 mm Number of cylinders 6 St. loading dimensions L x W x H 4500x950x2900 mm Hess Speedy frame press ----- will be checked Insertion dimension / pressing length max. 3,500 mm Insertion dimension / pressing height max. 2,550 mm Sliding carriage for width adjustment locking in 50 mm Double hole grid system Electric height adjustment of the long-stroke cylinders (hydraulic) Insertion height of the abutment plates can be preselected in 4 positions 3 vertical printing cylinders stroke 1000 mm Pressure force per cylinder 2000 kN / 20000 N 3 horizontal printing cylinders stroke 80 mm Pressure force per cylinder 1250 kN / 12500 N Printing plate depth 100 mm width 140 mm Grid for cylinder fixation/rear bearing 50 mm Medium pressure beam with shut-off valve Final pressure switch-off and pressure control Control and pressing process in touch button operation Adjustable pressing pressure min. 25 – max. 160 bar Electrical connection 2.2 kW / 400V 3 pendulum pressure plates for studio windows 1 pendulum pressure plate for pointed windows 1 extension for pendulum pressure plate 1 small parts allowance Image and video not original, show identical model ----- Price of the above mentioned machine, upon request! Bwodsxnqw Tepfx Ad Iju ----- For your information: One image shows homemade counterprofiles. This image is for illustrative purposes only. The counterprofiles are not included with this frame press. ----- (technical data according to the manufacturer - no guarantee!)

Condition: new, Ruchsr Assembly line consisting of: Item 1.0 / RU-CBM 4000 work table with running rail extended by 500mm for additional assembly an aluminum holder screwing machine for RU-CSA-SMB or RU-CSA-SMZD with RU-SH special screwdriver, support table Length 4000 mm, width 1400 mm, inclination of the working platform manually adjustable. Holder for fitting scissors or fitting punch. 16 pieces of swiveling counter-holders for hanging the wings, completely pneumatic Foldable for unhindered movement of the wings on the table surface. Device for scanning the sash fitting length for constant and variable/central gear seat for already drilled wings, colored Dimension recognition of the fittings. RU-SH, special screwdriver with pneumatic depth switch on carriage mounted, safety control, pneumatic height adjustment, Screw feeder with automatic shutdown of the filling container (Manual insertion for a second screw length on the special screwdriver upon request). RA-8, turret stop for 8 screw levels mounted on the carriage. RA-4, turret stop for 4 different wing widths Swivel table mounted. Pneumatic wing measurement sensing. operated, scanning range up to 2500mm simultaneous clamping of the scanning. PSF - Pneumatic tensioning device for sashes. Working height adjustable from 900 - 1000 mm. Support table covered with felt. Running rail extended to the left by 800 mm. Item 1.1 / 5035-1 Pneumatic swivel device of the work surface with foot valve Item 1.2 / 0500000 Holder matched to customer punch/scissors. For mounting a hardware punch provided by the customer or Fitting shears (third-party manufacturer) on the sash assembly table. Please specify make when ordering!!! Item 1.3 / 5597-7 Driving device for RU-CBM on semicircular rails. The castors are on the left and right of the base frame of the table mounted. Item 1.4 / 6354-6 3 double meters of semicircular rails 30 x 10 mm. Item 1.5 / 0730000 Bwjdped Ih Huefx Ad Iju RU-SBL3000/40 free-standing fitting bearing, Length 3100 mm, depth 1250 mm, height 2200 mm, Stand frame on the front without supports, 40 compartments, divided into 10 compartments in a row by dividers and a continuous shelf at the top, Compartment size: width 280 mm, height 150 mm. Item 2 RU-CSA-SMB aluminum holder screwing machine with automatic Screw feeding and manual feeding of the aluminum holders from one traveling box with pneumatic positioning device, Screwdriver with depth cut-off with 4-fold turret stop. Pneumatic adjustment device in the y direction against 2 pieces 6-fold Revolver attacks. Feed container for manual feeding of rotary holders or clip holder in square shape 18.5 x 18.5. The holder is manually pushed into a channel in the box and with positioned in front of the screwdriver mouthpiece using a pneumatically operated slide. Profile depth max. 150 mm, screw spacing in the y direction max. 120 mm. Item 3 RU-S48-A6-350 column slewing crane for chain hoist, with 6 m aluminum boom Version with column, smooth-running boom and sliding chassis for swivel and trolley travel manually by pulling and pushing the load. Projection 6 m Construction height 4,461 m Lower edge of boom 3.722 m (top edge of boom 3.9 m) Swivel range max. 270° Painting of the steel construction in RAL 7035 The base plate is attached to the on-site hall floor At least 250 mm thick. Designed, of course, according to the valid STANDARD EN 13155...