Used Bad Salzungen Mr 250/4 for sale (65,022)

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 2,477 h, load capacity: 2,500 kg, fuel type: electric, fork length: 2,350 mm, drive type: Elektro, Low level order picker Load centre: 600 Condition: Ready for use and fully functional Technical condition: very good Front tyre type: Polyurethane Bdsdpfx Asyyrvwekaeb Rear tyre type: Polyurethane Battery voltage: 24V Battery year of manufacture: 2023 Description: Scale Initial lift,

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system Control system upgrade available 2 identical machines available External dimensions: Height 4730 mm Width 3270 mm Depth 1680 mm 29 supports, each with a payload of 250 kg In the clear usable dimensions: Bdedpfednhz Uox Akasb H = 215 mm W = 2730 mm D = 620 mm Chain pitch 254 mm Intermediate shelves are available for 0 support sets, allowing a payload of 160 kg per usable level. Intermediate shelves can be manufactured upon request. Storage table at a height of 900 mm above the top of the machine - V2A steel worktop cover Color: Gray / Gray Surface cleaned, signs of wear may occur Drive motor power: 2 x 1.5 kW / 400 Volt Subject to errors and technical changes or deviations in details in the photos. Delivery & installation currently mainly in Germany, Austria, and other neighboring countries.

Condition: new, Ostas 4-Roller Plate Rolling Machine 4R OHS 2570 x 250 Hydraulic Side Roll Adjustment 3 Digital Readouts Hydraulic Drop-End Hardened Rolls Bdodpfx Aksxrdcdoajb Conical Bending Device Separate Control Panel Roll Length: 2570 mm Top Roll Diameter: 250 mm Side Roll Diameter: 200 mm Total Motor Power: 7.5+1.5 kW Weight: 6300 kg Dimensions (mm): 4550 x 1550 x 1470 (L x W x H) Bending Performance Data 10 mm at minimum inner diameter (5 x top roll) 8 mm at minimum inner diameter (1.5 x top roll) Pre-bending Performance Data 8 mm at minimum inner diameter (5 x top roll) 6 mm at minimum inner diameter (1.5 x top roll) All bending capacities are calculated based on 250 N/mm² yield strength Material: ST 37 – ST 42 structural steel The images shown are for illustration purposes only.

Condition: new, Ostas 4-Roller Plate Bending Machine 4R OHS 3070 x 250 Hydraulic side roll adjustment 3 digital displays Hydraulic drop-end bearing Hardened rolls Cone bending device Separate control panel Roll length: 3070 mm Top roll diameter: 250 mm Side roll diameter: 200 mm Total motor power: 7.5 + 1.5 kW Weight: 9800 kg Dimensions (mm): 5050 x 1550 x 1470 (L x W x H) Bending performance data 9 mm at minimum inner diameter (5 x top roll) 7 mm at minimum inner diameter (1.5 x top roll) Pre-bending performance data 7 mm at minimum inner diameter (5 x top roll) 5 mm at minimum inner diameter (1.5 x top roll) All bending capacities are based on a yield strength of 250 N/mm2 Material: (ST 37 – ST 42 structural steel) Bjdpfx Akoyaqmajajdb

Condition: used, Vibratory bowl feeder / Sorting unit / Bowl feeder / Vibratory feeder RNA Vibrating bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Feeding system, feeder unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial no.: Year of manufacture: approx. 2000 Bowl diameter bottom: 300 mm Bowl diameter top: 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - The feeder was used for supplying automotive blade fuses Space requirements: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear feeder / Vibratory feeder / Sorting unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Serial no. 00835 Year of manufacture: approx. 2000 Maximum rail length: 700 mm Useful load: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Overall height with oscillating plate 145 mm Space requirements: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibration drives, control device, regulator, controller for vibratory feeders / sorting unit / bowl feeder / vibrating bowl / vibratory conveyor Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 V eff (230VAC motor operation) at 230V mains 0 ... 98 V eff (115VAC motor operation) at 115V mains Output voltage: 0...208 V (eff.) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Bowl feeder, linear feeder max. 10A adjustable Output 2: Bowl feeder, linear feeder max. 6A adjustable Total load current: 16 A eff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max. 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay OFF: 0 ... 8 sec. Power output connection: Hirschmann 7-pin - Two power outputs Bsdpfx Akouzn Nnsaodb - Sensor amplifier with independently adjustable time stages (on/off) - Soft start (internally adjustable) - External enable input 24VDC Space requirements: L x W x H: 260 x 190 x 140 mm Weight of controller: 3.6 kg All units tested and in good condition.

Condition: used, mileage: 377,000 km, power: 235 kW (319.51 HP), first registration: 02/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 9,500 mm, loading space width: 2,490 mm, loading space height: 2,350 mm, Equipment: ABS, air conditioning, Manufacturer Scania Model P320 6x2?4 Carrier Supra 1250 Mt 9.50 m. box Year 2016 Condition Good Serial Number YS2P6X20005442786 Bjdpfx Akjynq Dzoajdb Ref. nr. 1218078 Reg. date: Hk: 320 Km: 377000 Gearbox: Opticruise GR875 Eurotype: 6 Diesel tank: 1 Tank liter: 400 Air conditioning: ? Cabin type: CP16 Navigation: ? Radio: ? Disc brake: ? ABS: ? Engine brake: ? Tire Size: 315/70R22,5 Front suspension: Air Suspension rear: Air Wheelbase: 5700 mm. Total weight: 26000 kg. Net weight: 13300 kg. Load capacity 12700 kg. Inside length: 9500 mm. Internal width: 2490 mm. Interior height: 2350 mm. Lift Brand: Palfinger Lift capacity: 2500 kg. Remote control: ? Refrigerator brand: Carrier Supra 1250 mt. Refrigerator year: 2016 Double compartment: ?

Condition: new, x-travel: 4000y-travel: 2000z-travel: 250performance of pump (flushing): 37 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! benefits No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum steel Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤   1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! Bdjdpfx Ajd Ab Uuekajb So you can work longer than 1 hour.

Condition: good (used), functionality: fully functional, Year of construction: 1975, sheet thickness (max.): 4 mm, power: 22.06 kW (29.99 HP), cutting length (max.): 2,500 mm, Old but well-maintained machine Bedpfx Aer Nvf Uekajdb

Condition: used, machine/vehicle number: 008131, Max. panel width: 4400 mm Bdjdpfx Aew Idh Hjkaeb Max. panel length: 4400 mm Main saw blade projection: 75 mm No of Grippers: 7

Condition: used, machine/vehicle number: 007538, Max. panel width: 4300 mm Bsdpfx Aksuwzupjasdb Max. panel length: 4300 mm Main saw blade projection: 80 mm No of Grippers: 8

Condition: new, wheel diameter 250 mm grinding wheel size 250 x 25 x 20 mm turning speeds 2850 U/min voltage 400 V Bdedsxak H Sspfx Akajb total power requirement 2.0 kW weight of the machine ca. 23.0 kg. dimensions of the machine ca. 600 x 290 x 300 mm Furnishing: - Heavy design and high quality equipment - ideal for professional use - Ideal for matting, polishing - up to mirror-smooth surfaces of various materials - with the help of optionally available polishing discs and polishing pastes - Lockable ON-OFF switch according to IP54 with undervoltage release - Including motor with copper winding for a long service life - Standard with rubber feet for vibration-free work - Very smooth running thanks to balanced rotor with quality ball bearings - Elegant machine body made from high quality die-cast - Suitable for polishing metal, plastic and non-ferrous materials Scope of delivery: - Soft polishing pad - Hard polishing pad - Operating instructions in German

Condition: new, grinding width 32.0 mm Bsdpexaa Aiefx Akasdb max. dia. of grinding wheel 250 mm grinding wheel size 250 x 32 x 32 mm turning speeds 2850 U/min Grain size K 36 / K 80 engine output 1.5 kW voltage 400 V weight 30.0 kg range L-W-H 510 x 320 x 360 mm scope of delivery : - Grinding disc K 36 - Finishing wheel K 80 - Spark protection on both sides - workpiece support

Condition: new, weight max. in kg 250 kg arm length 4000 mm height 3425 Unterkante Ausleger total column height 4.025 mm swivelling range 270 Grad Total weight, approx. 375 kg Description: - Load capacity 250 kg - projection 4000 mm - Construction height 4025 mm - Crane lacquer in color RAL 1007 daffodil yellow - Calculation basis DIN 15018 - Crane classification H2 / B2 - Operating location hall operation - Size / bracket profile LS36 / FormC 110x90 - Height of the lower edge of the boom 3425 mm - Operating voltage 3 / PE ~ 50 Hz 400 V - Direct control type of control - Degree of protection IP55 - Swivel range, nominally 270 ° - Panning by hand including: - Anchor rods size LS 36 - Consists of 8 pieces M24 mm x 800 mm, with 1 steel template (420/8) for - Fastening to the foundation, including accessories Electric chain hoist: - Chain hoist type GM 2 250.6-1, 1-leg - painted in color RAL 5017 - traffic blue - Load capacity 250 kg - hook path 4000 mm - highest hook position 3034 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.5 / 6 m / min Bsdpfexak D Rex Akaedb - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED Fig. Shows a similar crane system

Condition: good (used), Year of construction: 2009, functionality: fully functional, number of straightening rollers: 7, coil weight: 4,000 kg, coil outer diameter: 1,500 mm, number of feed rollers: 2, straightening roller diameter: 80 mm, coil width: 600 mm, 1. Decoiler Type: MS 4000 Coil weight: max. 4.000 kg Strip width: max. 600 mm Outer diameter: max. 1.500 mm Inner diameter: 475 – 535 mm Execution: • Hydraulic expansion • Hydraulic pressure arm from top with hydraulic driven roll Rolle • Lateral swivel in roll on front side, disc at back side and additional 3 pc. single arms for coil keeping • Mandrel driven by electric motor, control by light sensor • Decoiler moveable for loading by hydraulic • Coil loading table Bdedpfx Aoq A Tw Rokaob 2. Straightening maschine Type: MR 58 Strip width: max. 600mm Stock thickness: 0,8 – 3,6 mm at rigidity 400 N/mm2 Straightening rolls: 7 pc., supported Pulling rolls: 2 pc. Diameter of rolls: 80 mm Speed: 5 – 30 m/min Execution: • Hardened and ground rollers • Pneumatically lifted feed roller • Straightening rollers adjustable as a block • Lateral strip guiding at infeed, manually adjustable via hand crank • Hydraulic strip insertion aid (support table, extendable tongue and pressure roller from above) • Straightening head can be opened (alligator mouth) • Ultrasonic sensor for loop control • Swivel control panel • Siemens S7-200 control system

Condition: used, mileage: 147,258 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: automatic, first registration: 05/2017, emission class: euro6, color: blue, number of seats: 6, total length: 5,140 mm, total width: 1,928 mm, total height: 1,880 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, * 360° camera * 3-seat comfort bench, 1st row, outer seat foldable * 3-seat comfort bench, 2nd row, outer seat foldable * 7G-TRONIC PLUS * AGILITY CONTROL suspension * AMG rear spoiler lip on tailgate * AMG alloy wheels 8J x 19, diamond turned * AMG Line * AMG trim elements * ATTENTION ASSIST * AVANTGARDE * Adaptive brake light * Passenger airbag * Active door retainer sliding door * Active parking assist * Permanent all-wheel drive * Ambient lighting * Removable trailer tow hitch with ball head * Armrests for rear passenger seats * Assistance package * Exit lights * Exterior and interior mirrors auto-dimming * Heated exterior mirrors, power folding * Reading spot in rear grab handle * Illuminated vanity mirrors * Front footwell lighting * Hill start assist * BlueEFFICIENCY package * Burmester surround sound system * COC papers * COLLISION PREVENTION ASSIST * COMAND Online * Tinted privacy glass rear, black glass * Eloxated roof rails * EASY-PACK tailgate * ECO start/stop function * ECO display * Electric operation for left and right sliding doors * Emissions standard Euro 6b M/N1 GR. II * Headlight assistant * 3,200 kg gross weight variant Bdodjyqhbpopfx Akaeb * 70-litre main tank * Black roof liner * Child locks for rear passenger doors * THERMOTRONIC automatic climate control * Instrument cluster with color display * Comfort passenger seat * Comfort roof console * Comfort driver seat * Comfort opening and closing with IR remote * Communications module Mercedes me connect services * PAINT: CAVANSITE BLUE METALLIC MB 5890 * LED Intelligent Light System * LUXURY ESTATE * Black Lugano leather * Leather steering wheel * Luxury estate * Mercedes-Benz Mobilo with DSB and GgD * Mercedes-Benz emergency call system * Centre console with roller blind * Engine OM 651 DE 22 LA 140 kW (190 hp) 3800 rpm * Multifunction steering wheel with trip computer * Parking package with 360° camera * Wheelbase 3200 mm, long overhang * Rain sensor * Wireless tire pressure monitoring, front and rear axles * LED tail, brake and indicator lights * Side skirts exterior * Separately opening rear window * Driver and passenger seat heating * Seat rail system with quick-release locking * Mirror package * Sports pedals * Lane keeping assist * Storage net passenger seat backrest * Storage net driver seat backrest * 12V sockets for right and left rear seat rows * CRUISE CONTROL * Thorax-pelvis sidebag, passenger * Thorax-pelvis sidebag, driver * Blind spot assist * Rear tailgate area lighting * Surround lighting in exterior mirrors * V-Class AVANTGARDE EDITION * Traffic sign assist * Warm air duct to passenger compartment * Auxiliary hot water heater * All-round heat-insulating glass * Electric auxiliary heater * Registered as passenger car * Lockable glove compartment Conversion service for panel vans and commercial vehicles available: For example: Retrofit tow bar €990.00 Increased towing capacity €714.00 Front bar €790.00 Cargo area lining from €1,390.00 Mixto conversion €6,990.00 Bench seating system with individual seats €7,900.00 Further prices on request. Vehicle is first-hand, with service booklet, one previous owner. We are happy to take your used vehicle in part-exchange, special financing from 4.99% possible. Delivery for an extra charge available!!! The information provided online is non-binding and for descriptive purposes only. They do not represent guaranteed characteristics. The seller accepts no liability for errors, input mistakes or data transmission errors / subject to c

Condition: good (used), Hydraulic container, hydraulic tank, aluminum container for hydraulic pump, hydraulic unit -Hydraulic tank: tank capacity approx. 40 liters -Filter: RT-Filter RMS-80 -Filter capacity: 80 l/min -Level indicator: Bsdpfx Akskahk Dsajdb -Dimensions total: 490/250/H565 mm -Weight: 23 kg

Condition: good (used), electric motor, three-phase motor -Power: 1.1 kW Bdsdpsdzyl Hofx Akaob -Speed: 1415 rpm -Shaft: Ø 22 x 50 mm -Design: B3 -Protection class: IP 44 -Dimensions: 300/157/H200 mm -Weight: 17 kg

Condition: used, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan Bedpfx Akot Rbhzsaedb -Dust extraction fan: Radial fan type DG 63 b -Motor: Dietz 0.125 kW 2845 rpm -Volume flow: 6 m³/min / 360 m³/h -Connection: inlet Ø 58 mm -Connection: output Ø 75 mm -Dimensions: 380/250/H360 mm -Weight: 9.2 kg

Condition: good (used), Hydraulic control block for hydraulic pump, hydraulic unit, control block, hydraulic control block, control unit, control valve, servo valve -Manufacturer: Promecam, hydraulic control block from press brake Promecam STPC 250 40 121 Bodpfx Akshqifyeaedb -Control valve: Abex Denison S16-92489 / S16-39303 / S26.20456 2-way cartridge valves: Bosch Individual components: type / number see photos -Dimensions: 875/560/H400 mm -Total weight: 204 kg

Condition: used, marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Marking prism: Prism block for marking plate, clamping plate, straightening bench ... 6 pieces -Prism width: 100 mm -Dimensions: 6x 250/140/H63 mm -Dimensions: see photo technical drawing -Delivery/Price: complete -Transport dimensions: 250/280/H190 mm Bdodpfx Aksu T Tp Ueajb -Total weight: 75.1 kg

Condition: good (used), Control unit, control valve, hydraulic pressure regulator, pressure switch, PressureController -Manufacturer: Parker i, Hydraulic Pressure Controller Type SCPSD-250-14-152 -Pressure range: 250 bar -Accessories: including attachments, see photos -Total dimensions: 210/90/H50 mm -Weight: 0.7 kg Bdsdpek Aubijfx Akaeb

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 535x250 mm, height 400 mm -Wall thickness: 43 mm -T slots: slot width 18 mm -Dimensions: see photos / technical drawing -Dimensions: 535/250/H400 mm -Weight: 106 kg Bdodpfsxuntxsx Akaob

Condition: used, Three-phase motor with 2 speeds, electric motor -Power: 1.7/6.4 kW -Speed: 720/1460 rpm -Shaft: Ø 38 mm -Construction: B3 -pole changing -Protection class: IP 44 -Dimensions: 490/315/H260 mm -Weight: 58 kg Bdsdpfjctyqcsx Akaeb

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 535x250 mm, height 410 mm Bedpfxsxugyke Akasdb -Wall thickness: 39 mm -T slots: slot width 18 mm -Dimensions: see photos / technical drawing -Dimensions: 535/250/H410 mm -Weight: 106 kg

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders Bedpfx Akov Szwvsajdb -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 250 mm -Type: S1-40/25x250 /OW TGL 10906 -Piston rod: Ø 25 mm / M16 -Hole diameter: 100 x 11 mm -Number: 5x cylinders available -Price: per piece -Dimensions: 400/95/H95 mm / 400/95/H110 mm -Weight: 5.3 kg/piece