Used Atr Wm275S for sale (407)

Year of construction: 1997, condition: ready for operation (used), Wire diameter (single wire): 6mm-14mm, wire diameter (double wire): 6mm-10mm, maximum bending angle: 180°, motor power: 22kW, feed rate: 1.5m/s, bending speed: 1000°/s, cutting time: 0.4s, hydraulic tank volume: 300l. Machine dimensions X/Y/Z: approx. 4900mm/1640mm/2200mm, weight: approx. 3300kg. Control system defective. Documentation available. On-site inspection is possible. Hjdpeuwrv Djfx Aqter

Year of construction: 2022, condition: ready for operation (used), A Mechatronika pick-and-place machine is available. Placement capacity: 1500/h, max. PCB dimensions X/Y: 300mm/400mm, component range: 0402 to 30mm/30mm, min. connection pitch: 0.5mm. Tape feeders: 8mm/12mm/16mm/24mm/32mm/44mm, max. number of 8mm tape feeders: 32, bar feeders: SO4 to PLCC84, component centering: optical (vision). Tool changer: 8, resolution X/Y: 5µm, angle resolution: 0.045°/step. Machine dimensions X/Y/Z without feeder: approx. 750mm/830mm/550mm, machine dimensions X/Y/Z with all attachments: 1700mm/1000mm/550mm, weight without feeder: approx. 70kg, operating hours: approx. 300h. Including base frame, computer unit, monitor, accessories and VS dosing unit for the fully automatic, program-controlled application of solder paste or adhesive from cartridges (5cm³/10cm³). Documentation available. On-site inspection is possible. Hjdpfeu Af Abox Aqtor

Condition: like new (used), Year of construction: 2017, operating hours: 108 h, functionality: fully functional, working width: 1,650 mm, power: 370 kW (503.06 HP), type of input current: three-phase, workpiece height (max.): 160 mm, input frequency: 50 Hz, input voltage: 400 V, workpiece width (max.): 1,650 mm, space requirement length: 7,660 mm, COSTA LEVIGATRICI 1650 CALIBRATOR/SANDING MACHINE This machine is in really new condition with only approximately 100 hours of operation. It is fully functional and operates without any issues. Technical Specifications * Machine Type: Automatic sanding / calibration line * Working Width: 1650 mm * Feed System: Motorized conveyor belt with variable speed control * Working thickness: 3 to 160 mm Hedpfxsyt H Dne Aqtsr Lower Section: * 3 sanding steel roller units * 1 finishing pad unit * Cleaning system with blowers and brushes Upper Section: * 3 sanding steel roller units * 1 finishing pad unit * Cleaning system with blowers and brushes Unit Power: * From 18.75 kW up to 75 kW (depending on the unit) Control System: * PLC control with touchscreen interface Safety: * Safety sensors * Emergency stop system

Condition: excellent (used), functionality: fully functional, mileage: 80,400 km, fuel type: diesel, empty load weight: 22,430 kg, overall weight: 22,590 kg, axle configuration: 6x6, wheelbase: 3,700 mm, axle spacing: 1,320 mm, fuel: diesel, color: yellow, driver cabin: day cab, gearing type: mechanical, suspension: steel, number of seats: 2, total length: 10,850 mm, total width: 2,500 mm, total height: 3,760 mm, Year of construction: 1990, Equipment: hill-start assist, tachograph, An authorized SUBARU dealer in Łaziska Górne offers for sale: TATRA T815 6X6 / 20 TON CRANE – a unique 1990 heavy-duty truck equipped with a professional BUMAR crane body. The vehicle is in good technical condition and has had only one owner. It is ideal for heavy construction and transport work. Thanks to its 6x6 drive, it is perfectly suited for operation in difficult conditions. We offer the option of installing a lattice boom (extension) that will increase the reach from 21m to up to 30 meters. The Tatra has two engines – one for the truck, in excellent condition, running smoothly and reliably. The second engine is a ZETOR, mounted on the crane. The price includes a complete set of documents for registration. If a UDT inspection is required, we can also perform it quickly and for a fee. We offer every form of payment: Leasing, credit, cash, and bank transfer. With cash or bank transfer payment, you can drive the vehicle away from the showroom immediately. Additionally, we handle insurance – we will calculate the cheapest premium for any vehicle – CHECK US OUT! We also deliver paid-for cars and trucks to the specified address throughout Europe. For more information about our services, please contact our sales representatives. Weights and dimensions: GVWR: 22590kg Unladen weight: 22430kg Crane lifting capacity up to 20 tons – depends on the installed pulley and the number of ropes. External dimensions: Length: 10850mm Width: 2500mm Height: 3760mm Wheelbase: 3700mm + 1320mm Engine type: T3-929.34 Capacity: 15825cm3 Power: 208kW Drive: 6x6 Equipment: Differential locks Fog lights Cabin heating Wipers Additional orange lighting 12V socket Tachograph with paper chart – a nice feature ☺️ Sunroof Spare wheel Turn signals Additional lighting for the crane body Inspection report: The truck arrived from Slovakia under its own power without any problems. The crane was tested and is functioning correctly. The Tatra switches between drive modes, the engine runs smoothly, and the gearbox operates correctly. No significant signs of corrosion. Hodey S R H Ejpfx Aqtor The chassis is professionally preserved. The stated price is the net price of PLN 79,900 and applies to export and for businesses. A discount is possible for individual customers. We invite you to contact us directly by phone to get your best price :)

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: A20611RM1, working width: 1,150 mm, feed rate X-axis: 3 m/min, type of input current: three-phase, sheet thickness (max.): 150 mm, overall weight: 3,900 kg, input voltage: 400 V, nominal power (apparent): 86 kVA, compressed air connection: 6 bar, input frequency: 50 Hz, workpiece width (max.): 1,150 mm, grinding width: 1,150 mm, height adjustment type: pneumatic, input current: 400 A, The COSTA MSA 2 CCCS 1150 is an industrial wide belt sander with three working units, designed for professional deburring, calibration, and superfine finishing of metal parts. It is intended for high productivity and excellent surface quality when processing steel, stainless steel, and aluminum. The machine offers adjustable speed, robust industrial design, central extraction, and the option for fine-tuning the working process to meet the needs of any metalworking company. Hedpfx Aoxugxaoqtsr

Year of construction: 1998, condition: reconditioned (used), coffin saw with drill Eugen Mayer lignum Eugen Mayer 715 column drills used 1998 Mark: eugen Model: Mayer 715 Description: Hjdokmgpvspfx Aqtsr beveller saw with drilling for Eugen Mayer coffins Year: 1998

Year of construction: 2012, condition: used, machine/vehicle number: AT92, Used Bottle Dryer Matrix year 2012 12000 bph The Used Bottle Dryer Matrix year 2012 12000 bph provides a linear drying solution for bottles in high-speed bottling lines. The Italian manufacturer Matrix built this model in 2012 and named it Dryer 1 neck. The system, therefore, uses targeted airflow to dry the neck area of each bottle efficiently. It processes up to 12,000 bottles per hour, which enables seamless integration into automated bottling systems. Mechanical Configuration and Operating Features This linear system guides bottles through a single-entry point, which ensures precise flow control and consistent alignment during drying. The Used Bottle Dryer Matrix year 2012 12000 bph includes six drying heads that direct airflow specifically to the neck. As a result, the unit delivers highly effective drying before labeling or secondary packaging. In addition, the machine handles all bottle formats without requiring mechanical changeovers. Consequently, operators can switch between formats quickly, maintaining flexibility across different production needs. Moreover, the uniform layout of the drying heads guarantees consistent results regardless of bottle size or shape. Because of its modular construction, technicians can perform cleaning and inspection operations with minimal downtime. Similarly, maintenance staff can access internal components without dismantling adjacent units. Dimensions, Electrical Supply, and Energy Use The machine measures 1000 mm in length, 1000 mm in depth, and 2000 mm in height. These compact dimensions allow technicians to install the dryer easily within standard bottling environments. Furthermore, its footprint prevents interference with upstream and downstream machinery. The Used Bottle Dryer Matrix year 2012 12000 bph operates on 400 Volts, at 50 Hz, and consumes 5.5 kW. These values match typical European industrial standards. Therefore, engineers can connect the unit without additional power conversion or infrastructure changes. In terms of energy efficiency, the machine balances high output with relatively low consumption. Hodpfx Aqjyhbwlstsr Additionally, the robust frame ensures mechanical stability during continuous use. As such, it supports uninterrupted production in demanding environments. Safety Systems, Integration, and Operational Status Matrix equipped the unit with comprehensive safety systems, which comply with regulations in force at the time of manufacture. These include emergency stop buttons and protective panels, both of which ensure operator safety during regular operation and maintenance. Moreover, these safeguards reduce the risk of accidents and equipment damage. The machine currently remains in ready-for-operation condition. For this reason, technical teams can deploy it without preliminary servicing or calibration. Moreover, its single-bottle entry system facilitates easy alignment with conveyors...

Condition: excellent (used), functionality: fully functional, 400 Amp power source, 2,500mm, Hedpfjwtp Svjx Aqter

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Category type: Sander - Polisher Hjdowrm Sdepfx Aqtsr Volume: 1 - 1 Convert Sells to: Worldwide I sell the widebelt sanding machine COSTA S CCTT 1350 Configuration 1pc. hard rubber cylinder 1pc. soft rubber cylinder 1pc electronic segmented pad 1pc electronic segmented pad Cleaning unit combined brush + air blow in the outfeed Pressure shoes for short elements Air-blow on all units Vacuum underpressure table with integrated ventilator Designed for the line with fixed working height and moving aggregates 4 motors total power 96kW Condition very good ! Available immediately

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 118394, type of input current: AC, overall weight: 2,540 kg, input voltage: 21,500 V, input frequency: 50 Hz, nominal power (apparent): 800 kVA, secondary voltage: 420 V, protection type (IP code): IP00, temperature: 100 °C, type of output current: AC, output voltage: 420 V, Equipment: type plate available, Transformer that has been used on short occasions for backup operation, especially the last two years, is in a heated container. Can be sold with or without container, can also be rented for short periods, We have our own crane truck if express delivery is needed. The container can also be supplemented with low-voltage switchgear made by ABB Kabeldon attached to the outside of the container. Hjdpsx Run Dofx Aqtjr

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 022607, Pipe washer La Chatre mod. 50 Year 2002 Hjdpfx Aqexmgy Iotsr In working condition CE marking

Condition: used, Used Fitzpatrick Chilsonator stainless steel system with Fitzpatrick model M5A comminutor. - Manufacturer: Fitzpatrick - Model: L89 - Material: Product contact parts stainless steel AISI 316 - Feed system: Horizontal and vertical screw. - Roll diameter: 8" - Roll width: 2" - Roll pressure: Air hydraulic booster system (ENERPACK BOOSTER) Fitzpatrick Fitzmill - Model: M5A Hsdsxd Alnepfx Aqtsr - Material: Product contact parts stainless stell AISI 316 - Rotor speed: 1000 - 3000 rpm - Drive: 3 HP Includes: control panel.

Condition: good (used), sander consisting of: first group - electronic cross belt second group - electronic pad belt third group - electronic pad belt superfinisher Hodpfx Aqot N Tfcetor machine with inverter on belt and vacuum for small parts line machine

Condition: excellent (used), COSTA LEVIGATORS Series S model SN 5-groups first group electronic sectioned transverse belt second group 1 roller third group 1 roller fourth group electronic sectioned pad super finisher fifth group electronic sectioned transverse belt machine width 1350 Hsdpfx Aqer Iyvmjter vacuum inverter on all belt groups inverter on belt outfeed brush group blower group on outlet

Condition: like new (used), Year of construction: 2018, Costa sanding machine suitable for sanding veneer, 650 mm working width, with 5 rollers Hjdpjxbh Agofx Aqter

Condition: excellent (used), Year of construction: 1997, I sell the widebelt sanding machine COSTA 71 CTT 1350, year 1997. Configuration: 1pc. hard rubber cylinder 1pc electronic segmented pad 1pc electronic segmented pad Cleaning unit combined brush + air blow in the outfeed. Working width 1350mm Pressure shoes for short elements. Air-blow on all units. Vacuum underpressure table with integrated ventilator. Hodpfx Aqexlk Rbeter Designed for the line, with fixed working height and moving aggregates. 3 motors total power 55kW Condition very good ! Available immediately.

Condition: excellent (used), Year of construction: 2011, I sell the widebelt sanding machine COSTA B FFFF 1350, year 2011. Configuration: 4 pcs. brushing aggregate with tool included Cleaning unit combined brush and air blow in the outfeed. Working width 1350mm Vacuum underpressure table with integrated ventilator. Hjdpevxfahsfx Aqter Designed for the line, with fixed working height and moving aggregates. 4 motors total power 32kW Condition very good ! Available immediately.

Condition: like new (used), Year of construction: 2020, operating hours: 28 h, functionality: fully functional, total width: 1,970 mm, total height: 2,410 mm, total length: 2,035 mm, working width: 1,350 mm, grinding width: 1,350 mm, overall weight: 3,600 kg, grinding height: 160 mm, grinding belt speed: 18,000 mm/s, type of input current: three-phase, conveyor belt speed: 333 mm/s, grinding belt length: 2,620 mm, workpiece height (max.): 160 mm, compressed air connection: 6 bar, grinding belt width: 1,380 mm, input frequency: 50 Hz, input voltage: 400 V, pressure: 6 bar, workpiece width (max.): 1,300 mm, Equipment: type plate available, Metgrid sp. z o.o. is selling an almost unused wide belt sander from the renowned manufacturer Costa. Machine specifications: - Costa MD6 CC 1350 wide belt sander - Maximum sanding width: approx. 1300 mm - Working thickness range: 0.8–160 mm – suitable for sanding sheets and profiles - Equipped with two sanding belts and a scotch brite brush - Comes with a full set of additional equipment: > Dust extraction system > Conveyor roller tables (custom designed and built) > Foil applicator for sheets (custom designed and built) The machine is like new, which is confirmed by a recent service report: "Technician’s service notes: Machine inspection. Operating hours: 28. Overall condition of the machine is very good, cylinders and drive belt in perfect condition. Test sanding on a stainless steel sheet – no remarks. Hsdpfxjyl Svte Aqter Filter: 26 hours. Operational, with some external signs of corrosion." More photos can be provided upon request for interested parties. The sander can be viewed in Zgierz, near Łódź. For any questions, please contact by message or phone.

Condition: excellent (used), Year of construction: 2004, I sell the widebelt sanding machine COSTA S CCTT 1350, year 2004. Configuration: 1pc. steel cylinder 1pc. hard rubber cylinder 1pc electronic segmented pad 1pc electronic segmented pad Cleaning unit combined brush + air blow in the outfeed. Working width 1350mm Pressure shoes for short elements. Air-blow on all units. Hjdpfx Aevxd Tteqtsr Vacuum underpressure table with integrated ventilator. Designed for the line, with fixed working height and moving aggregates. 4 motors total power 96kW Condition very good ! Available immediately.

Year of construction: 2019, condition: used, We offer this used Megatrex ATREX CD1000 G600 continuous grinding, mixing and dispersing unit (high-shear rotor system). Manufacturer: Megatrex Oy Model: ATREX CD1000 G600 Serial number: 4255 Year of manufacture: 2019 Condition: used Hjdpfx Aoy Eyv Ajqtsr Category ID: 507 Machine type: Continuous industrial mixer / disperser The machine is currently equipped with a 355kW motor and a compatible variable frequency drive. If the buyer plans to install a larger motor, we can also sell the machine without the motor and vfd. The equipment is located in Lohja, Finland, and is currently not connected to utilities, i.e., is ready for transport. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2004, I sell the widebelt sanding machine COSTA K CCC 1350, year 2004. Configuration: 55 KW steel calibration cylinder 45 KW hard rubber cylinder 37 KW soft rubber cylinder. Cleaning unit combined brush + air blow in the outfeed. Working width 1350mm Pressure shoes for short elements. Air-blow on all units. 3 motors 55 + 45 + 37kW Hodpfx Ajt Rn E Toqtsr Including full documentation. Condition very good ! Available immediately.

Condition: ready for operation (used), Max. swing over bed: 528 mm Max. swing over cross slide: 370 mm Max. turning length: 785 mm Spindle bore: 77 mm Main spindle speed range: 20 - 3,500 rpm Tool turret: 12 positions Hjdpfxox Hx A Do Aqtsr Control: FANUC O-T Year of manufacture: 2000 Machine weight approx.: 6,200 kg

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: A11108GM1, Costa K6 CCC 1350 Wide Belt Sander Year of production: 2001 Technical condition: very good after major renovation at COSTA in 2023 Costa K3 CCC 1350 Wide Belt Sander sander from 2001 is a solid industrial machine designed for sanding and calibrating wooden surfaces. The machine has a fixed table and a movable working part with rollers Fixed working height of 890 mm can be installed in a line Hodpfxjwczkij Aqtor The additional machine has a vacuum table powered by its own fan Here are the key technical data of this machine: - Sanding width: 1350 mm - Number of sanding units: 3 (steel calibration shaft, 2x rubber shaft - Cleaning or sanding brush Length of the sanding belt 3250mm

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Machining system M8 cube B Traverse path: 1.020 mm x 830 mm (x, y), with tool changer 720 mm in Y • Feed: up to 22 m/min. • New Chip disposal concept; integrated central chip trolley • Complete cabin Coordinate table: Solid concrete polymer table with a steel frame, portal design with doubles -sided Y drive. Hedpfx Aqszlbx Njtsr • Z-stroke: 245 mm • Portal passage: 200 mm • Installation dimensions (without Terminal): 1.760 mm x 1.740 mm x 1.950 mm (Machine) • Drive system: digital servo drive; ball screw for every axis • Weight: approx. 1.300 kg Control DATRON next+ DATRON next - Option package: HF spindle, 3kWR0, HSK-E 25 R GMN HC80cg-40000, thread reducing clamp CNC Hand-held control unit B10-2 DATRON next Camera-Feature Tool magazine 12-fold (HSK-E 25) DATRON Tool length probe incl. blow-off station, M8Cube 12-fold TC High-precision probe Z TP-R Vacuum distributor 2-fold Pro Vacuum pump, 250 cbm/h 3x400V, 32A, Vacuum plate with meander-formed slots 1000x700x30 mm (M8/ML/MXCube, M10 Pro)

Condition: new, Stromab Matrix F Automatic Fully Programmable Cross Cutting & Notching Machine A heavy duty optimising upstroke crosscut and notching machine, designed for programmable and repetitive cutting and notching from standard and / or random lengths of timber. The saw unit has a pneumatic upstroke action with variable speed control, The notching unit is independent of the saw and therefore allows for programming of the saw or notching either as separate program's or as one single job. The pusher / feed is fitted with a heavy duty rack and pinion drive feeding system for fast positioning giving a high level of repeat cutting accuracy. The saw unit and clamping area is totally enclosed by a clear hinged electrically interlocked hood that while giving the operator a clear view of the cutting area still gives complete protection. The infeed and outfeed tables are of all steel construction meaning even heavy sections or packs of timber can be processed. For additional operator safety the rear of the pusher system is guarded, while there is a full length safety pull cord on the front infeed table. Programming and entering of cutting lists is very simple through a colour touch screen controller with graphic representation of the cut pieces. The machine offers full optimisation and also has the added optional facilities of defect cutting and remote programming from PC or laptop with transfer vis USB key or network. Additional options also include - extended outfeed table and label printing. To date we have supplied over 250 Matrix saws in to the UK, with a number of customers installing several machines. Saw unit Self braking saw motor 10hp Saw blade diameter 500mm Max cutting width 360mm ( refer to chart ) Max cutting height 135mm ( refer to chart ) Dust extraction 4 x 100mm diameter Milling Unit Self braking milling motor 5.5hp Pneumatic milling stroke with adjustable speed Max milling stroke 400mm Max milling width 100mm Max milling depth 60mm Dust extraction 2 x 125mm and 2 x 100mm Push feed system 3000 to 13000mm Precision rack and pinion drive to pusher with magnetic reading tape giving a high level of repeat cutting accuracy. Pneumatic rising of the pusher at the end of cutting cycle Piece length reading photocell Positioning speed 100m/min Positioning accuracy + /- 0.4mm Touch screen control unit Remote programming of cutting list via colour graphic touch screen controller - connection via USB key. - 6 optimising criteria - longest size, minimum waste, sequence, priority size, by volume or by value. - 1000 cutting lists - 10,000 lines per list. - Cutting list entered via controller key pad or via remote PC using PC or cable Hsdpfx Aody Hrdjqtor - Graphic description of the workpiece.