Used Wp Kemper Manual Rolling Machine for sale (74,362)

Condition: ready for operation (used), functionality: fully functional, control type: PLC-controlled, 3-roll bending machine Manufacturer: FERRO S.R.L. Model: CIT - 1 Nsdpfsyw S E Hex Amnslb Working area: 2000 x 6 mm Hydraulic tilting support for workpiece changes Control panel Emergency stop via cable pull Condition: good / immediately ready for use

Condition: used, Year of construction: 2009, CNC-controlled round bending machine Schröder-Fasti Type 114 Year of manufacture: 2009 Condition: Used, like new Exhibition machine Operating hours: < 50 hours Technical data 10/1.0 10/1.5 Useful length (mm) 1080 1080 Sheet thickness (400 N/mm²) 1.0 1.5 Roller diameter (mm) 68 80 Motor power (kW) 8.2 8.2 Weight (kg) 1780 Standard equipment: - CR80 control system on a rotatable panel, frequency-controlled rear roller positioning - Rollers, approx. 700 N/mm² tensile strength - Three-roller drive - Hydraulic adjustment of the bending rollers - Hydraulic adjustment of the lower rollers - Automatic opening of the upper roller bearing - Foot switch - Electrical safety control Nsdpfx Asy Twfqomnjlb Optional equipment: - Rollers hardened and ground, roller diameter 68/80 mm - Tube ejector - Hydraulic tube support for large tubes

Condition: used, functionality: fully functional, Equipment: centralized greasing system, cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, DAVI Croqueuse Plate Rolling Machine Roll diameter: 180 mm Rolling length up to 3 m Njdpjy Emtnsfx Amnslb Thickness up to 15 mm

Condition: used, Year of construction: 1971, machine/vehicle number: 15162, Roller diameter 150 mm, coolant device and machine lamp Nljdpfjy Sqigex Amneb

Condition: used, Year of construction: 1954, machine/vehicle number: 6315, Roll diameter 200 mm, coolant device and machine lamp Nledpfx Amey Sqi Tjneb

Condition: used, Technical data paper roll cutting machine. This machine can only be used for small residual rolls up to a maximum diameter of 400 mm in order to automatically unwind these residual rolls and cut the paper into strips so that it can be better pressed into bales. Manufacturer unknown Type unknown Year of manufacture unknown Dimensions feed table for rolls: Nljdpfx Amou Tg Spenob Width inside of rolls 2.195 mm Height inside of castors 465 mm Transport dimensions Feed table over all: 2,650 x 1,300 x 2,150 mm (W x H x D) Dimensions roller cutter: Width cutting shaft inside 2.250 mm Transport dimensions of the roll slitter over all: 3,050 x 1,550 x 550 mm (W x H x D) Remarks: There are no further data or documents available. A viewing is possible by appointment. We assume no liability for the technical data and possible errors.

Condition: ready for operation (used), 1 x Davi round bending machine / plate rolling machine / four-roll bending machine (Davi 4 roller bending machine). . Video available via WhatsApp/Messenger/Viber . Inspection welcome near D-24983 Handewitt Njdpfxjymnzbo Amnolb . Further information upon serious interest

Condition: new, Year of construction: 2026, functionality: fully functional, conveyor belt width: 350 mm, warranty duration: 24 months, total width: 1,310 mm, total length: 630 mm, total height: 500 mm, input voltage: 230 V, table length: 600 mm, empty load weight: 79 kg, opening width: 25 mm, working width: 350 mm, space requirement height: 580 mm, space requirement length: 630 mm, space requirement width: 590 mm, power: 0.37 kW (0.50 HP), SINMAG Rollo Mini tabletop sheeter, even for the smallest bakery Advantages: + Excellent price-performance ratio with a 2-year warranty + Ultra-compact tabletop sheeter with motorized belt drive + Extremely easy to operate with a joystick for adjusting the sheeting direction + Suitable for all types of dough for sheeting and layering + PVC conveyor belts, easy and quick to clean + Therefore also suitable for marzipan and rolled fondant + Tables can be folded up on the left and right + No high-voltage power required + Integrated motor and flour container + Scrapers can be easily removed without tools + Standard equipment includes 1 hand crank and 2 dough collection trays + Can be placed on almost any table (requires a depth of only 50 cm) + Fast supply of spare parts within 1-2 working days SPECIAL accessories, available at an extra charge: --- Stainless steel frame for Sinmag Rollo (extra charge: €1,590.00 net) + The perfect, space-saving tabletop solution for the Rollo + Table can be folded up with just a few steps + Frame with a sturdy stainless steel frame, on 4 swivel castors Technical data: - Belt width: 350 mm - Table length: 600 mm each = 1200 mm - Roller adjustment: from 1 mm to 25 mm (depending on the product) - Suitable for a maximum of 1.8 kg of dough - Motor power: 0.37 kW - Connection values: 230V - 1Ph - 50Hz - Dimensions: --- Working position: 1310 x 630 x 500 mm (W x D x H) --- Rest position: 590 x 630 x 580 mm (W x D x H) Nedpow T Rp Uofx Amnjlb - Net weight: 79 kg

Condition: used, Year of construction: 1993, plate thickness max. 3 mm distance betw. rolls 125 mm throat max. 500 mm weight ca. 500 kg Material thickness at 40 kg/mm² tensile strength: max. 3 mm Working width: 500 mm Working depth: 450 mm Manual adjustment of the upper roller Roller center distance: 125 mm Continuously variable working speed: 3–15 m/min Nljdpfsy Iha Ujx Amnob Stop skirt incl. 1 pair of rolls Forward/reverse operation via foot switch

Condition: new, Year of construction: 2026, number of rollers: 3, roller (bottom) diameter: 190 mm, roller (top) diameter: 190 mm, side roll diameter: 190 mm, working width: 1,550 mm, sheet thickness steel (max.): 9 mm, number of digital displays: 2, Equipment: cone bending device, emergency stop, hardened rollers, swiveling upper roller, – Capacity 1550 x 9 mm – Electrically adjustable rear roller Nlodpfxjy Rh H Te Amnsb – Electrically adjustable lower roller (material clamping) – Digital display for rear roller movement – Digital display for lower roller movement (material clamping) – Hardened rollers – Conical rolling – Swing-out upper roller – Braking motor – Emergency stop – Documentation – 400V

Condition: good (used), 3-Roll Plate Rolling Machine Nodpjy Rx Dcefx Amnslb Type R55 Working length 1020 mm Maximum sheet thickness 1.25 mm Good, fully functional condition.

Condition: ready for operation (used), Year of construction: 1994, sheet width 2550 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 205 mm Nedpey Ez A Rjfx Amnjlb side roll diameter ~ 195 mm Control konv. oil volume 80.0 Liter voltage 380 V total power requirement 7.5 kW weight 4500 kg range L-W-H 5000 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

Condition: new, Year of construction: 2026, Ring Rolling Machine MB 50 - with standard roller set - footpedal - two drivn rollers - horizontal and vertical use - bending capacity round tube up to 60 x3,6 mm - angle iron 50x50x6 mm - solid steel 35 mm - main motor 1,5 kw - shaft diameter 50 mm Njdpfx Ajdkxlksmnelb - weight 325 kg - 400 volt 3 phase

Condition: good (used), Technical specifications: Working width: 4050 mm Max. bending capacity: 6.0 mm Max. pre-bending: 4.0 mm Top roller diameter: 210 mm Njdpfxewkaalo Amnslb Side lower roller diameter: 210 mm Middle lower roller diameter: 210 mm Conical bending device by tilting the two side rollers Hydraulic folding bearings Pivoting control panel with digital display Dimensions (length x width x height): approx. 6900 x 2300 x 1800 mm Weight: approx. 14 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1997, functionality: unexamined, total height: 2,500 mm, total length: 33,223 mm, total width: 2,000 mm, table width: 700 mm, input frequency: 60 Hz, input voltage: 460 V, table length: 5,000 mm, table height: 1,200 mm, control cabinet width: 600 mm, control cabinet length: 1,500 mm, control cabinet height: 2,500 mm, compressed air connection: 5.5 bar, Stud & Track Rollforming Machine With 4.5 Tonnes Decoiler & Crane 5 Tonnes Capacity - Fully Dismantled - Ready to be transported MACHINE MANUFACTURER: BRADBURY UK GENERAL SPECIFICATIONS STUD LINE MATERIAL : GALVANIZED COLD ROLLED STEEL MATERIAL STRENGTH : 85.000 PSI MAX YIELD STRENGTH 55.000 PSI MIN· YIELD STRENGTH THICKNESS: 20 GA. TO 16 GA.-"HEAVY GAUGE" 22 GA. TO 25 GA.-"LIGHT GAUGE" ENTRY COIL WEIGHT: 10.000 LB MAX ENTRY STRIP WIDTH: 12" MAX C APPROX. 5" MIN C APPROX. ENTRY COIL I .D: 20" MAX ENTRY COIL O.D: 72" MAX EFF. LINE SPEED : l20-150 FPM-"HEAVY GAUGE" 175-250 FPM-"LIGHT GAUGE" ROLLFORMER SPEED: 120-250 FPM PASS LINE HEIGHT: 51" LINE DIRECTION : RIGHT TO LEFT MODE OF OPERATION : PREPUNCH/POSTCUT CUT LENGTH : 20' MAX. 5· MIN GAUGE" : 90 % C APPROX. ) OF PRODUCT iON < i 6' LENGTH TOLERANCE : •/- 1/16" AT 250 FPM MAIN POWER : ELEC : 460 VOLTS 60 HERTZ 3 PHASE 192.2 FLA : AIR : 80 PSI MIN. CLEAN 6 DRY : HYO : 1500 PSI WORKING PRESSURE Nodpfexya Hzjx Amnslb CONTROL : 115 VOLT AC AIR CONSUMPTION: 2 CFM MAX. AT 80 PSI

Condition: good (used), - Type: AKLE-L 700 - Year of manufacture: 2011 - Serial number: 0127930010 - 2 x available both are new unused Nedpfx Asru Dd Romnjlb

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, working width: 300 mm, total width: 2,300 mm, total length: 750 mm, total height: 1,370 mm, DGUV certified until: 05/2027, type of input current: three-phase, conveyor belt width: 300 mm, year of last overhaul: 2024, Lippelt Mini Rustica Roll Line For all types of specialty rolls Stainless steel construction Simple and efficient production of square dough pieces Robust engineering Connection: 400V, 16A-CEE plug Dimensions approx.: L 2300 x W 750 x H 1370 mm Used machine Nlsdpjy H Utljfx Amnjb We have more bakery machines in stock for you!

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1028, Thread Rolling Machine LEISTRITZ RT 400-CCA Year of manufacture: 2004 / Control system retrofit in 2019 Connection voltage: 3x400 V Frequency: 50 Hz Rated power: 65 kW Nljdpfx Aexytmhomnsb Main fuse: 125 A Operating pressure: Air: 6 bar, Oil: 270 bar Control voltage: 24 VDC Maximum shaft length: 275 mm Minimum shaft length: 125 mm Maximum roll set diameter: Tool Ø69.85: 215 mm, Tool Ø80: 210 mm Minimum roll set diameter: Tool Ø69.85: 176-178 mm, Tool Ø80: 176 mm Maximum rolling force: 40 t Space requirement: 3.4 m x 2.9 m x 2.2 m Weight: 4900 kg Accessories: - Coolant filtration system - Second spindle pair (1x for tools Ø69.85 mm, 1x for tools Ø80 mm)

Condition: new, sheet width 1550 mm plate thickness 4,5 mm pre-bending 4,0 mm roll length 1550 mm min. dia. 190 mm roll diam. toproll 130 mm weight 1265 kg dimensions 2670x1110x1050 mm Domestic equipments: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Nljdpfx Amoyvvrhenjb Additional equipment: - induction hardened rolls - motorized rear roller adjustment - Digital display for back roller

Condition: new, sheet width 2050 mm plate thickness 4,5 mm pre-bending 4,0 mm min. dia. 210 mm roll diameter 140 mm weight of the machine ca. 1530 kg dimensions of the machine ca. 3220x1200x900 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Nsdpfxoyvvrbs Amnjlb Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls

Condition: new, sheet width 1250 mm plate thickness 5,5 mm pre-bending 5,0 mm roll length 1280 mm min. dia. 210 mm roll diam. toproll 140 mm weight 1365 kg Nlodpfjyvvpyex Amnsb range L-W-H 2.020 x 900 x 1.200 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls

Year of construction: 1990, condition: used, functionality: fully functional, For sale is a robust and fully operational roll forming machine for the production of corrugated and tile-profile sheets made of aluminum. The system is suitable for the continuous production of various profile geometries. The machine was commissioned in October 1990 at Leichtmetallwerk Nachterstedt GmbH and impresses with its solid industrial design. Thanks to the integrated profiling line, the cutting and embossing tool, and the automatic stacking device, an efficient production process is possible, from the coil to the finished profile. The system is particularly designed for the production of roofing profiles, tile profiles, and aluminum corrugated profiles, thus offering a versatile range of applications in the field of sheet metal processing and profile manufacturing. System components: - Coil - Profiling line - Cutting and embossing tool - Automatic stacking device Currently produced profiles: - Tile profile 33/175; material thickness: 0.6 mm - Asymmetrical corrugated profile 33/175; material thicknesses: 0.6 mm and 0.7 mm - Aluminum corrugated profile 28/125; material thicknesses: 0.7 mm, 0.8 mm and 1.0 mm Nodpfx Amoy Sxhwonslb Condition & Inspection: The system is ready for production, is in fully operational condition, and is currently still used for production. This allows the functionality to be verified on-site if desired. The roll forming machine can be inspected at any time by arrangement at our location in Krostitz, Hilchenbacher Straße 2A. The system is immediately available and ready for sale. We will gladly provide further technical information, images or details upon serious interest.

Condition: as good as new (ex-display), Year of construction: 2026, sheet width 2050 mm plate thickness 4.5 mm 4.0 mm roll length 2050 mm min. dia. 210 mm roll diam. toproll 140 mm weight 1530 kg range L-W-H 3220 x 1200 x 900 mm Exhibition machine from 2026 With only approx. 2 operating hours Condition like new Njdpfxexaawge Amnolb Special price on request Features: - Robust electromechanical bending machine - 2 central rollers driven by electric motors (top & bottom rollers) - Top roller manually swivels out, with hinged bearing - Includes tapered bending attachment - Freely movable control panel - Bottom roller manually adjustable via handwheel - Asymmetrical roller arrangement - Self-braking main motor - Safety device (safety tether with switch unit) - CE marking/Declaration of Conformity Optional equipment included in the price: - Hardened rollers - Motorized side roller adjustment - Digital position display for motorized adjustable side roller

Condition: used, sheet width 3355 mm plate thickness 63,5 mm Njdpfeyuql Ssx Amnolb roll diameter 686 mm voltage 400 V total power requirement 150 HP weight of the machine ca. 95 t dimensions of the machine ca. 62 m

Condition: used, Year of construction: 1992, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 205 mm side roll diameter ~ 195 mm Control konv. oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 3200 kg range L-W-H 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC Nodjxacdvopfx Amnolb - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)