Used Wld-Tec Gas Burner for sale (8,540)

Condition: used, This listing is for ATI Porta Sens 11 Gas leak detector The unit is in full working condition and ready for immediate use. Reliable handheld gas monitor designed for efficient leak checks across laboratory facilities. Transparency Report and Technical Audit: Cgsdpfxjxv Dh Is Akwjw • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, Internal combustion forklift, gas-powered forklift STILL model RX 70-16T Serial No. 517314G00021, Year of manufacture 2016 Rated load capacity 1600 kg Lifting height 4920 mm Fork length 1000 mm Csdpfx Asinldwokwjgw Fork carriage width 980 mm Overall height 2160 mm Overall width 1100 mm Overall length without forks 2200 mm Self-weight 3040 kg - Triplex mast with full free lift 1550 mm - Hydraulic side shifter - Internal combustion electric drive - 4-cylinder Volkswagen internal combustion engine with 30 kW - Hydraulic power steering - Work light at the front - Rear warning light (blue) - Warning flashing light at the rear (yellow) - 4-wheel superelastic, solid rubber tires, front 18X7-8 SE / rear 18X7-8 SE - Battery charger for starter battery, maintenance charger VICTRON - New TÜV inspection and UVV certification (surcharge 150 EUR net) in good condition

Condition: used, This listing is for the ATi Portsens111 Gas Leak Detector The unit is in full working condition and is ready for immediate use Cgsdpfx Aexhfqbjkwjw The ATI PortaSens III is a portable, handheld gas leak detector designed for locating and measuring gas leaks across a wide range of environments—from chemical plants to pharmaceutical labs, food processing facilities, and confined spaces Key Features & Capabilities Interchangeable Smart Sensors Attaches a variety of pre‑calibrated smart sensor modules, each combining sensor, amplifier, and memory into one. These allow detection of 30 to over 60 different gases, depending on configuration Swapping sensors takes under a minute and requires no user calibration Built-in Sampling Pump & Flexible Wand Enables pinpoint detection of leak sources via one‑hand operation Color Touch-Screen Display Features a backlit, graphic or touch-enabled LCD for easy reading in all lighting conditions Data Logging & Connectivity Includes a 4 GB internal data-logger, capturing millions of data points. Log intervals are programmable from 1 to 60 minutes, with USB connectivity for data transfer Power Options Runs on either rechargeable NiMH “D” cell battery or traditional alkaline D-cell batteries Alarms & Alerts Offers both visual and audible alarms—including low flow and low battery warnings—plus multiple gas concentration thresholds Supported Gases The D16 PortaSens III can detect a broad spectrum of gases, including but not limited to: Toxic gases: Hydrogen sulfide (H₂S), hydrogen peroxide (H₂O₂), formaldehyde, chlorine, sulfur dioxide, ammonia, and others Common industrial gases: Oxygen (O₂), ozone (O₃), carbon monoxide, carbon dioxide Specialty/exotic gases: Arsine (AsH₃), diborane, ethylene oxide, phosphine, silane, bromine, iodine, and more

Condition: used, This listing is for a Drager Accuro Gas Detector Pump. The unit is in full working condition and is ready for immediate release. Cgjdpfx Aexxy Txekwsw The Drager Accuro Gas Detector Pump is a robust and versatile manually operated bellows pump, tailored for effective gas detection in challenging environments. Key Features: Manual Operation: Designed for manual use, this pump requires no external power supply, making it ideal for potentially explosive atmospheres where electrical equipment may pose a risk. One-Handed Operation: Its ergonomic design allows users to operate the pump with one hand, facilitating gas detection in confined or hard-to-reach spaces, such as narrow pipelines or cramped industrial areas. Calibrated 100 mL Sample: The pump accurately draws a 100 mL sample through the gas detection tube, ensuring precise measurements for a wide range of gases. Pressure-Controlled End of Stroke Indication: This feature provides a clear signal when the sample has been drawn, enhancing user confidence that the measurement is complete and accurate. Compatibility: The pump is compatible with over 500 different short-term gas detection tubes, offering extensive versatility across various applications. Benefits: Fast Measurement: Users can perform gas measurements quickly, which is critical in time-sensitive situations such as emergency response or environmental monitoring. Reliable Measurements: The design ensures dependable operation, even in difficult-to-access locations, making it suitable for a range of industries, including manufacturing, construction, and environmental science. Cost-Effective: The manual operation and compatibility with numerous gas detection tubes provide a budget-friendly solution for regular gas monitoring without needing elaborate electronic equipment. Easy to Use: Minimal training is required to operate the pump, making it accessible to a broader range of users and reducing downtime. Applications: Industrial Safety: Ideal for monitoring gas levels in manufacturing plants, warehouses, and construction sites. Environmental Monitoring: Useful for assessing air quality in potentially hazardous or remote locations. Emergency Response: Essential for first responders evaluating hazardous gas situations in emergencies.

Condition: used, This listing is for the Hitech Instruments GIR250 Gas Analyser The unit is in full working condition and is ready for immediate use The GIR250 is a bench‑top / transportable analyser designed to measure oxygen (O₂) and carbon dioxide (CO₂) simultaneously in gas samples. It is made by Hitech Instruments (now part of the MTL / Eaton group). Its design emphasizes ease of use, reliability, and low maintenance cost. Cgodpfx Aexhdqtekwjw Other supporting features: The instrument can be programmed with pass/fail criteria for each gas (alarms). It provides analog outputs, typically 4–20 mA, for external logging or control systems. Calibration is designed to be simple (via the front panel keypad) to reduce training burden. The O₂ galvanic cell is user-replaceable (i.e. maintenance can be performed in the field). Mechanical, Electrical & Operational Details The GIR250 is housed in a rugged, transportable case (lab-style) so it can be used as a benchtop or mobile analyser. Sample inlet and outlet connections use 0.25″ (~6 mm) tubing. The sample system should avoid condensation and contaminants; non‑condensing sample environment is required. Operating ambient temperature: –5 to +40 °C (for non‑condensing conditions) Power / interface: standard for bench‑top analysers (the catalogue doesn’t always detail it, but likely mains or DC supply, suitable for lab use) Typical Applications & Suitability Because it can measure both O₂ and CO₂ in a single unit, the GIR250 is used in applications such as: Respiration / breathing gas analysis / Douglas bag analysis (i.e. in physiological or experimental gas mixture measurement) Fermentation / bioprocess monitoring (where O₂ and CO₂ both matter) Gas mixture / inertisation / process gas quality (checking gas purity, calibrating mixtures) It is not primarily intended for measuring very low trace levels (ppm-level) of O₂ or CO₂ unless its ranges are suitably adapted or specified. The design is more for percent-range analysis

Condition: used, Year of construction: 2000, current intensivity bis 300 A Cedjyacp Hopfx Akwegw burner heads . dimensions of the machine ca. . m

Condition: used, Year of construction: 2000, current intensivity bis 350 A burner heads . dimensions of the machine ca. . m Cgjdpfx Ajyacpyskwjw

Condition: used, Year of construction: 2009, 2009 current intensivity 300 A wire dia. 1 mm sofort einsatzbereit 239836 +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++ Csdpfx Ajx U A Ruskwegw

Condition: used, functionality: unexamined, machine/vehicle number: System 16, Used MDA Scientific System 16 Toxic Gas Monitor Manufacturer: MDA Scientific Inc. Model: System 16 Cgjdpfxjw H Nuds Akwjw Chemcassette Detection System / Toxic Gas Monitor

Condition: used, heating: electrical useable space: ø400 x 400 mm temperature: max. 1.300°C Cgodpfx Asv Sbc Eokwew ventilation: exhaust fan during the cooling phase and activated cooling fan ultimate vacuum: 10 mbar exhaustion time: ca. 5 min nitrogen: inlet pressure min. 3 bar oxygen: inlet pressure min. 3 bar

Condition: new, welding current max. 200 A open-circuit voltage 14 - 24 V connected load frequency 230 V weight 25 kg Dimensions (LxWxH) 500 x 200 x 300 mm Equipment: Hose package Ground cable Welding nozzles Cgodpfog U Tccox Akwow

Condition: used, SLA5800 Biotech - MFC - Digitally controlled mass flow controller for gas, Mass Flow Controller Cgjdpfouqgbyex Akwow elastomer-sealed mass flow controller, flow control, flow meter, flow controller, thermal mass flow BROOKS INSTRUMENT Type SLA585081BAB1A2S1 Ser. No. 01C00500222 Year of manufacture 2020 (new / unused in original packaging) SLA5800 Biotech series Option package Biotech Premium Packet Code T Mains connection 13.5 - 27 VDC (plug M8, 5 pin, male) Power consumption max. 10 watts PROFINET interface (2x RJ-45) Visual display 2 LEDs (NET / MOD) Gas connection 6 mm Swagelok Valve design Normally closed User gas O2 (oxygen) Active - Multiple / O2 (oxygen), N2 (nitrogen), CO2 (carbon dioxide), AIR (air) Calibration gas N2 (nitrogen) Flow control ranges (full scale) 20000 sccm (20 liters / minute) Maximum inlet pressure 4500 psi (300 bar) Normal operation Pressure differential 60 psig (4 bar) Control range 2% to 100% of full scale (range of mechanism) Typical accuracy from 20 to 100 % ± 0.9 % of set point for 20 to 100 % of full scale Typical accuracy from 2 to 20 % ± 0.18 % of full scale for 2 to 20 % of full scale Repeatability ± 0.2 % of the measured value Resolution 0.1 % of full scale Typical response time of the controller

Condition: ready for operation (used), Max. Working temperature: 1120°, heated length: 1000mm, cooling length: 1850mm, channel height: 40mm, conveyor belt width: 110mm, throughput speed: 100-1000mm/min, splitting gas consumption: 1.5-2.5Nm³/h, touch panel: Siemens SIMATIC HMI, length: 5000mm, width: 650mm, height: 1350mm, with integrated ammonia splitter GSP 25 FA, integrated gassing panel, protective gas from ammonia splitter (on-site ammonia supply) + N2 purge gas as required, MSR system with Siemens PLC and touch HMI, atmosphere monitoring, process documentation, on-site inspection is possible. Cgodoq Ttz Eopfx Akwew

Condition: ready for operation (used), GASTEC Detector Tubes indicate concentrations directly by way of a calibrated scale printed on the tubes. At GASTEC, we endeavour to achieve highest quality detector tubes for analysing airborne gases/vapours, as well as pollutants in soil and water through our advanced state-of-the-art research and development. Through our efforts we have acquired a solid reputation among our customers in virtually all sectors of industry, commerce and society. Tubes are now available for more than 500 different applications. Cjdpfx Ajy D D Tcokwegw

Year of construction: 2004, condition: used, functionality: unexamined, Professional, mobile dispensing unit from the hospitality sector. Compact system with integrated cooling and sink – ideal for events, breweries, tastings, or temporary bars. Out of service for an extended period, requires inspection and overhaul. Manufacturer: HAGOLA Gastronomie-Technik Model: hkt16 Year of manufacture: 02/2004 Connection: 230 V / 50 Hz Refrigerant: R134a Compressor power: 460 W (down to approx. –10 °C) Equipment • 3 taps on stainless steel column • Integrated beer cooler (flow-through chiller) • Sink with tap fitting • Stainless steel drip tray / drip area • Undercounter unit with technical compartment and castors • Lines and parts as shown in photos Condition Unit was operational up to removal. Stored since. Used condition with normal signs of wear. Functional testing is recommended prior to recommissioning. Application Cgodpfx Akoy Srkfjwow Serving at events, brewery festivals, outdoor bars, catering.

Condition: used, Flanged ball valve Cgsdpfod D Iq Esx Akwew -Full passage with: mounting flange suitable for direct mounting -Flange: DN65 -Number: 1x available -Price: per piece -Dimensions: 170/185/H198 mm -Weight: 11.2 kg

Condition: new, Year of construction: 2017, Gas flame treatment system Arcotec FTS 4005 DR som, manufactured in week 42 of 2017. The machine is new and unused and has CE certification. Operating voltage: 400V, power: 7kW. The gas type is preset to propane, but natural gas can also be used. Burners: 4x MB3-500S/2E. The materials that can be treated are metal sheets. The gas flame treatment system is intended exclusively for the thermal pre-treatment of metal sheet surfaces in order to improve the adhesion of printing inks, lacquers, adhesives, foam, etc. The machine cost over €200,000! Cgsdped Rik Ajfx Akwow

Condition: ready for operation (used), Year of construction: 2007, operating hours: 20,700 h, pressing force: 337 t, overall weight: 24,000 kg, travel distance X-axis: 800 mm, controller manufacturer: DELEM, controller model: DA-66W, number of axes: 6, This 6-axis GASPARINI PSG 330/4000 Variante C was manufactured in 2007. It features a bending force of 330 tons and a useful bending length of 4100 mm. The machine includes a stroke of 400 mm and an X-axis travel of 800 mm. If you are looking to get high-quality bending capabilities, consider the GASPARINI PSG 330/4000 Variante C press brake we have for sale. Contact us for further details. Cgodpoy U Hwrofx Akwow - Distance Between Uprights: 3600 mm- Stroke: 400 mm- Installation Height: 600 mm- Throat: 500 mm- Approach Speed: 0 - 200 mm/sek- Return Speed: 0 - 125 mm/sek- Working Speed: 0 - 8.5 mm/sek- X-Axis Speed: 300 mm/s- X-Axis Accuracy: ±0.05 mm- R-Axis Stroke: 250 mm- R-Axis Speed: 160 mm/s- R-Axis Accuracy: ±0.1 mm- Z-Axis Speed (Option): 1000 mm/s- Z-Axis Accuracy (Option): ±0.25 mm- Z-Axis Repeatability (Option): ±0.15 mm- Motor Power: 30 kW- Oil Tank Capacity: 420 L- Recommended Hydraulic Oil: Shell Tellus Oil TX 46- Machine Weight: ca. 24 Ton- Table Width: 90 mm- Working Height: 965 mm- Hydraulic Components: Rexroth- Electrical Components: Telemecanique- Pneumatic Components: SMC- Control Unit CNC: Delem DA-66W- Safety System: Nuova Elettronica DFS Laser Beam - RX (Type 4 Safety Device)- Power Supply: 400V / 50Hz- Machine hours: 20,700 / 2,000,000 strokes- CNC controlled Z1-Z2-Z5 with 6-axis control DA - 66 W- Tool holder with upper and lower jaw clamping system Technical Specification Bending Length 4100 mm

Condition: good (used), TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: Gas-cooled -Length: 7.7 m -Connector: 4-pin -Transport dimensions: 400/400/H100 mm Cgjdpfx Akoylk Hwowow -Weight: 4.7 kg

Condition: good (used), TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: Gas-cooled Cgodpoylk Egjfx Akwjw -Length: 8.3 m -Connector: 4-pin -Transport dimensions: 340/340/H120 mm -Weight: 3.6 kg

Condition: good (used), TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: Gas-cooled -Length: 4 m -Connector: 4-pin Cjdpfx Akoykz D Rswjgw -Transport dimensions: 320/320/H80 mm -Weight: 2.3 kg

Condition: good (used), TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: Gas-cooled -Length: 8.2 m Codeyg Humspfx Akwjgw -Connector: 2-pin -Transport dimensions: 380/380/H90 mm -Weight: 3.6 kg

Condition: used, Year of construction: 2022, Overview  This carbonating unit was manufactured in 2022 by German company KH TEC. The machine is designed for beer carbonation. The unit is stopped, still in production condition, and equipped with HMI and automated operation. It is available immediately and can be visited on request. The machine is being sold as it will be replaced by a new system. Technical data Cgedpfxjyk Ab Ds Akwow - Capacity: 20 HL/hour - Application: Beer - Configuration: Automated, HMI-controlled  

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 09/2014, total width: 2,470 mm, suspension: air, tire size: 385/55-R22.5, color: black, Year of construction: 2014, Equipment: ABS, = Additional Options and Accessories = - BPW axles - EBS - Lift axle - Air suspension - Drum brakes = Notes = Nice 2014 D-TEC FLEXITRAILER 45FT HC chassis, BPW axles with drum brakes, ABS/EBS, 1st axle = lift axle, 3x extendable (front, middle and rear), 1x20FT, 2x20FT, 1x20FT middle, 1x30FT, 1x40FT, 1x40FT HC, 1x45FT HC, unladen weight: 4,962 kg, permissible total weight: 43,000 kg, 385/55-R22.5 tires (R: 6/6/5mm; L: 5/6/5mm)), Dutch registration with valid technical inspection until 25-09-2026 = Further Information = Axle configuration Tire size: 385/55-R22.5 Axle brand: BPW Eco-Plus Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tire tread left: 40%; Tire tread right: 35% Rear axle 2: Max. axle load: 9000 kg; Tire tread left: 40%; Tire tread right: 40% Rear axle 3: Max. axle load: 9000 kg; Tire tread left: 35%; Tire tread right: 35% Weights Unladen weight: 4,962 kg Cgsdpfszinmzjx Akwsw Payload: 38,038 kg GVW: 43,000 kg Functional Body brand: D-TEC FLEXITRAILER Extendable body: Yes Maintenance, History and Condition APK (Technical Inspection): valid until 09.2026 Technical condition: very good Optical condition: very good Identification License plate: ON-18-JZ Further Information Please contact Arne Honingh for further information.

Condition: used, axle configuration: 3 axles, first registration: 08/2015, color: other, Year of construction: 2015, Empty weight: 3.800 kg Axle 1: left 12 mm right 12mm Cjdpfozhv D Ssx Akwjgw Axle 2: left 12 mm right 12 mm Axle 3: left 12 mm right 8 mm We have the possibility to stack trailers!