Used Vei Vei-Gb-Ko for sale (4,324)

Year of construction: 2015, condition: used, external dimensions: Dcsdpfjclupdsx Am Rjh lenght: 3900 mm width: 1320 mm height: 1090 mm (above base frame) muffle lenght: 3960 mm mesh belt: 480 mm width clear height 140 mm max. furnace area temperature: 750°C max. temperature inside the muffle: 700°C water cooled ventilators : 3 electrical connected loads: three-phase: 3 x 400 V, 50 Hz power consumption: 75 kVA heating power, 3 zones each: 24 kW = 72 kW PLC : Siemens S7

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,715 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Vehicle information ? Length: 13,860 mm ? Height: 4,000 mm ? ? width: 2,550 mm ? Load compartment length (inside): 13,620 mm ? Load compartment height (inside): 2,715 mm ? Load-through height in the rear portal: 2,630 mm ? Load compartment width (inside): 2,480 mm ? Semi-mounted height: 1,150 mm ? Permissible total weight: 36,000 kg ? Unladen weight: 7,200 kg Dcodpfjlxwr Iox Am Roh _____ Axles ? Krone axles with disc brakes ? Tire brand: No brand 385/65 R22.5 ? 1st axle Lift axle ? ABS ? ? Air suspension ? ? steel rims ? Mechanical supports ? Knorr brake position ? Wheel chocks _____ Body / add-on parts ? Side collision protection Open ? Tail lift, make: BÄR vertical, load capacity: 2000 KG ? Platform of the tail lift at full height ? with 2-fold roll-off protection ? Battery supply via SmartCharge (7-pin) ? 1 toolbox ? 2 row(s) of horizontally recessed slot-and-hole lashing rails ? Attachment: Height center 1st lashing row above floor 800 mm ? Attachment: Height center 2nd lashing row above floor 1600 mm _____ Floor ? 30 mm thick waterproof panel floor ? Floor loads of up to 7,000 kg forklift axle load ? Premium visual sealing ? 13 pairs of lashing rings embedded in the floor ? Forklift collision protection inside on front wall, approx. 250 mm high _____ Lighting / electrics ? Side marker lights (flashing function) ? 2 LED license plate lights ? 2 clearance lights with rubber arm, LED version ? Lighting carrier designed for tail lift operation ? 3-chamber tail lights ? 6 LED ceiling lights _____ Paintwork ? Chassis: RAL 9005 - deep black ? Body: RAL 9010 - pure white ? Axle hub: RAL 9005 - jet black ? Rims SILVERNATUR ? Load securing certificate in accordance with EN 12642 Code XL ? Certificate for load securing according to Daimler guideline 9.5 ? Certificate for load securing for beverage transportation (VDI 2700 Bl. 12) ? ADR approval certificate EX/II without FL, AT, MEMU

Condition: good (used), Sawdust extractor,dust extraction,self-cleaning filter,vacuum ALKO FU RG Filter cleaned pneumatically with compressed air pulses during operation, thus high efficiency of the device. 5,5 Kw fan Dcsdpsip Nqkofx Am Rjh Capacity 5940 m3/h Filtration area 30m2 Vacuum 3000 Pa Air return with ventilation ducts and summer/winter flap Noise attenuator Manifold with pneumatic gates for connection with machines Control cabinet with technical documentation. Customs sluice Additional 3 kw transport fan for transporting sawdust from the customs sluice Inlet 4 x 250 mm Dimensions: height - 4.35m Width - 1.45m x 1.45m

Condition: new, power: 152 kW (206.66 HP), fuel type: diesel, overall weight: 7,200 kg, color: white, gearing type: automatic, number of seats: 3, loading space length: 6,050 mm, loading space width: 2,440 mm, loading space height: 2,400 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, tail-lift, IVECO Daily 70C21HA8/P with box body and tail lift, new vehicle: * With day registration * German documents * EURO VI E * 8-speed automatic transmission * Comfort driver’s seat with suspension * Radio with Bluetooth (hands-free system), navigation system * LED headlights/daytime running lights * Fog lights * Factory-installed air suspension on rear axle * Multifunction steering wheel * Roof spoiler and side skirts * Reversing camera with 7" monitor * 90 l fuel tank * White box body * L x W x H = 605 x 244 x 240 cm (internal dimensions) * Side walls and roof made of 24 mm sandwich panels * Payload approx. 3,400 kg * Right rear side door, can be locked in open position * 2x combination lashing rails per side * Base scuff rail, 150 mm high * Interior lighting * 15 mm multiplex floor panel * Dhollandia tail lift 180 x 252 cm * Lifting capacity 1,000 kg at 60 cm load distance Load securing equipment also available from us: * Tension and lashing straps * Load bars * Warning vests * Transport boxes * Edge protectors * Dunnage bags * Wheel chocks * etc. Dedpfjvv Dfkex Am Rech Financing and leasing available We manufacture bodies of any size and type for any chassis. Tarpaulin, GRP sandwich, aluminium. Visit us at: Bodies – Complete vehicles – Trailers – Consultation – Financing Subject to prior sale and errors. No liability for printing or typing errors.

Condition: new, power: 121 kW (164.51 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, loading space length: 4,300 mm, loading space width: 2,230 mm, loading space height: 2,280 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), New vehicle: German documents * With daily registration * Euro 6e * 6-speed transmission * 2 seats * GVW 3,500 kg Dcedpfx Amerwdtco Reh * Driver's airbag * Central locking with remote control * Electric windows Body: * Internal dimensions (L x W x H): 430 x 223 x 228 cm * Drive-over rear tailgate * Loading height: 67 cm * Walls: 30 mm sandwich panels * Front wall: Aluminium * Floor: 18 mm multiplex board * Interior LED lighting Load securing equipment also available from us: * Lashing and tension straps * Shoring beams * Safety vests * Transport boxes * Edge protectors * Dunnage bags * Wheel chocks * Etc. Financing and leasing options available We manufacture bodies of any size for any chassis. Tarp, GRP sandwich, aluminium. Visit us at: Bodies - Complete vehicles - Trailers - Consulting - Financing Errors and prior sale reserved, no liability for printing or typographical errors.

Condition: new, mileage: 10 km, power: 132 kW (179.47 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, loading space length: 4,100 mm, loading space width: 2,100 mm, loading space height: 2,300 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, tail-lift, New vehicle without registration: * German documents * Driver’s air-suspension seat * All-weather tires * Reversing camera * 10-inch navigation system with DAB, Bluetooth, and multifunction steering wheel * Electric windows * Electric, heated exterior mirrors * Roof spoiler Dcedpow Nuy Nsfx Am Rjh Body: * Internal dimensions approx. L x W x H = 410 x 210 x 230 cm * Walls 24 mm, sandwich panel construction * Roof 24 mm, sandwich panel construction * Floor 16 mm multiplex board * Tail lift D-Hollandia, 750 kg load capacity Optional: * Side door * Tow bar with wiring kit Load securing equipment also available from us: * Tension and lashing straps * Load bars * Safety vests * Transport boxes * Edge protection * Dunnage bags * Wheel chocks * etc. Financing and leasing available We manufacture bodies of any size on any chassis. Curtainsider, GRP sandwich, aluminium. Visit us at: Bodies - Complete vehicles - Trailers - Consultation - Financing Subject to errors and prior sale, no liability for printing or typographical mistakes.

Condition: new, Efficient extraction of cooling and lubricating fluids directly at the machining center The two standard units, AL-KO OIL JET 600 and OIL JET 1200, are the ideal solution for direct extraction of oil and emulsion mist from all common turning, grinding, and milling machines. Application areas: AL-KO OIL JET units are used wherever oil and emulsion mist generated during the machining process needs to be directly extracted from the workspace of modern metal-cutting machines. Depending on workspace size, operating time, and the type of coolant used, either the OIL JET 600 or the more powerful OIL JET 1200 is selected. AL-KO OIL JET units are compatible with all standard coolants and lubricants and are installed directly onto the machine tool or positioned alongside on an optional mounting column. Functionality: The highly efficient filter system of AL-KO OIL JET units features, as standard, a three-stage filtration process that removes emulsion content and material particles from the extracted air. 1st stage: Washable metal mesh filter 2nd stage: Filter mat (LoTex®) with frame 3rd stage: Main filter cassette (ePM1 80%) The first stage separates coarse particles. The second stage, made from a nanocoated, drained mat, separates and channels away emulsion content. The third stage filters out the finest residual particles. Emulsion collected mainly in the second filter stage is gathered in the lower part of the unit and can be drained off. Applications: - Lathes - Machine tools - Metal-cutting machines Advantages: - Compact design - High separation efficiency thanks to three-stage filtration Dcjdpfx Amowwt Tlo Rsh - Energy-efficient EC motors - Simple, tool-free filter replacement - Numerous options

Condition: new, Year of construction: 2025, Extraction nozzle 355 mm Nominal motor rating 15.0 kW / 3 Ph Voltage 400 V / 50 Hz Djdefzbqyjpfx Am Rech Max. flow rate ca. 10,000 m3/h Nominal flow rate* 7,127 m3/h Vacuum at nominal flow rate 3,000 Pa Filter area 73 m2 Pre-separator Integrated Extinguishing device Integrated Swarf collection capacity (net / gross) 3 x 165 L / 3 x 250 L Sound pressure level 73 dB(A) Dimensions (L / W / H) in mm 3,130 x 1,058 x 2,351 Weight net 1,040 kg

Condition: new, Equipment: dust extraction, For all industrial processes where dust and coarse particles are generated, the clean air dust extractors of the AL-KO CLEAN UNIT D series are the right choice. Thanks to their powerful fans and highly effective filter cartridges, these mobile extraction units ensure clean air in metalworking as well as in the plastics, food, and chemical industries. Functionality: Dedswwkrfspfx Am Rsch Dust and coarse particles are extracted directly at the machine or via capture hoods and conveyed through a suction line to the inlet of the AL-KO CLEAN UNIT D. In a generously dimensioned pre-separation chamber, coarse particles are separated. The downstream filter cartridges of dust class 'M' filter out the remaining fine dust particles. The differential pressure-controlled filter cleaning system removes adhering particles from the filter cartridges even during continuous operation. Venturi nozzles on the filter cartridges enhance the cleaning effect, ensuring consistent suction power and a long filter service life. The collected dust is gathered in an easily maneuverable container with an integrated collection bag, enabling low-dust disposal. The purified air is returned to the workspace via the top of the unit. Applications: - Direct extraction of dust and chips - Suitable for single or multiple workstations - For connection to machines, extraction tables, booths, and ducting - For metal and plastics processing and many other industries - For grinding, polishing, filling processes, and more Advantages: - High suction performance due to an efficient fan and cleanable filters with a long service life - Suitable for a wide range of applications - Extremely quiet thanks to highly effective sound insulation - IE3 motors for high energy efficiency - Plug-and-play

Condition: new, With air flow rates of up to 22,000 m³/h, the stationary compact filter systems of the ECO JET series offer a wide range of applications. They are the ideal extraction solution for machines in various manufacturing sectors and industries, including larger processing machines. Eligible for BAFA funding according to Module 4. ECO JET series systems are equipped with fans arranged on the clean air side, which draw the dust- and chip-laden air towards the filter unit. In the most powerful DUO models, two fans are connected in parallel. A flange at the filter unit inlet enables the connection of custom duct diameters. The aerodynamically optimized airflow in the separation chamber allows coarse particles to be separated directly, without reaching the filter bags. Residual dust collected by the filters is automatically cleaned by the AL-KO OPTI JET® filter cleaning system, with the separated material discharged into mobile collection containers located beneath the filter. Applications: - Extraction from production machines, machining centers, and ductwork systems with multiple suction points - Direct extraction for continuous operation Dsdpswwtuijfx Am Rsch - In sectors such as wood processing, joineries, carpentry workshops, furniture manufacturing, plastics manufacturing and processing, paper production, orthopedic industry, and many more Advantages: - Wide selection of standard extraction systems with numerous customer-specific customization and options - Consistently high suction performance thanks to integrated pre-separator and AL-KO OPTI JET filter cleaning system - Heating cost savings, as 100% recirculation operation is possible in many cases - Small footprint due to compact design - Suitable for indoor and outdoor installation - Available in ATEX-compliant versions - Extensive range of accessories and numerous options for individual device configuration - Eligible for BAFA funding according to Module 4

Condition: new, In addition to pigments and additives, wet paints also contain other harmful substances that must be extracted without fail. AL‑KO COLOUR JET extraction units are the ideal solution here, offering four performance levels to ensure sufficient capacity at all times. Dedpfx Amswv T R Us Rech The devices in the COLOUR JET series are optimally designed for the extraction of paint mist and solvents at wet painting workstations. The front guide plate ensures collection of emissions from below and at the side inlets, as solvents from paints settle and accumulate near the floor. At the same time, the guide plate ensures uniform air distribution across the filter and protects the filter medium from direct impact. Paint pigments are separated out via the large-area exchangeable filter, and the cleaned exhaust air is then routed outdoors via a pipe or hose. Applications: - Wet painting workstations in trade, industry, and workshops - Painting stations with ATEX Zone 2 Advantages: - Clean and safe painting workstations thanks to high extraction performance and an effective filtration system - Flexible use due to mobile design - Cost-effective and powerful, in many cases a substitute for a closed spray booth - Safety via certification for use in potentially explosive atmospheres (ATEX Zone 2) - Individually adaptable with a wide range of accessories

Condition: new, The powerful, mobile welding fume extractors AL-KO CLEAN UNIT F are the ideal solution for extracting welding fumes during manual welding, at automated welding stations, or with welding robots. Function: The welding fumes generated at the welding site are captured via extraction arms and hoods, among other means, and conveyed through a duct to the inlet of the AL-KO CLEAN UNIT F. In a large pre-separation chamber, coarse particles are first separated out. The subsequently arranged filter cartridges of dust class “M” filter out the remaining fine dust particles. During extraction operation, the differential pressure-controlled filter cleaning system removes adhering particles from the filter cartridges. Venturi nozzles on the filter cartridges maximize the cleaning efficiency, ensuring consistently high suction power and a long filter service life. A volumetric flow monitor continuously controls the required suction capacity and issues a warning if the nominal value is undercut. The collected dust is gathered in an easily mobile container. The cleaned air is recirculated into the room via the top of the unit. Dcjdpfx Aewwkvqom Rsh Applications: - For all welding applications with unalloyed or low-alloyed steel - Usable as extraction at individual welding stations and at duct systems with several extraction points - Extraction at fixed-position hoods and welding tables Advantages: - Consistently high suction power thanks to an efficient fan and long-life cleanable filters - Extremely quiet due to high-performance sound insulation - Suitable for individual welding stations and for connection to duct systems - IE3 motors for high energy efficiency - Wide performance range - Optional accessories for various welding applications

Condition: new, Thanks to their modular design, the PROFI JET® series system filter units enable the bespoke planning and construction of extraction solutions for virtually any required air volume and practically every conceivable application. The proven system also impresses with outstanding noise protection due to its insulated wall panels and, when installed outdoors, minimizes heat loss. Eligible for BAFA funding under Module 4. Operation: The custom-designed extraction systems of the PROFI JET series are built on a robust steel frame. The frame is fully clad with insulated, double-walled, powder-coated steel sheet panels to ensure that all components—including fan, filter cleaning, and discharge elements—are protected from dirt and weather within the closed system enclosure. The clean-air side fans are installed at the top of the unit and draw in dust- and chip-laden air into the filter section. A generously proportioned pre-separation chamber ensures effective separation of coarse particles and chips. The subsequent filter bags or cartridges remove any remaining fine dust. The cleaned exhaust air is routed through a sound-insulated return air chamber either back into the building or discharged outside. Applications: - Extraction at multiple processing machines, workstations, or entire production areas - Spatial ventilation and extraction for enclosures and work cabins - Suitable for virtually all types of dust and chips - Also for dusts and applications with ATEX classification - Extraction especially in the wood, plastics, metal, welding, cutting, and recycling industries—as well as many others Advantages: - Custom, precise planning and implementation of your extraction system - Cost-effective and quick delivery due to modular design with standard components - Quiet and energy-saving operation thanks to insulated panels Dcodpfx Amewwryqe Roh - Consistently high extraction performance due to integrated pre-separation chamber and AL-KO OPTI JET® filter cleaning system - Heating cost savings, as 100% recirculated air operation is possible in many cases - Minimal space requirements due to compact construction - Suitable for indoor and outdoor installation - Professional appearance thanks to powder-coated panels - Available in ATEX-compliant versions - Comprehensive accessories and numerous options for individualized system configuration - Eligible for BAFA funding under Module 4

Condition: new, The AL-KO CLEAN VAC central vacuum units are the ideal solution for direct extraction from handheld processing machines and as central vacuums for cleaning entire workshop or production areas. Wherever high suction power is required or long piping runs need to be bridged, AL-KO CLEAN VAC units are the perfect solution. Applications: - Extraction for handheld processing machines, e.g. in joineries, grinding shops, training workshops Dsdpfswwt Aasx Am Rsch - Cleaning vacuuming of floors and machines in workshops, production areas or warehouses - Direct extraction at small diameters such as filling stations, dosing systems, etc. Advantages: - High suction power up to 25,000 Pa negative pressure - Perfect plug & play: fully pre-assembled at the factory. Fully operational after connecting power and compressed air - 100% air recirculation via M-class dust filters (residual dust < 0.1 mg/m3) with optional H13/H14 post-filter stage - Attractive appearance and additionally weatherproof - Low-noise operation thanks to sound-insulated and powder-coated housing - Easy handling: set up, connect, immediately ready for operation at the customer’s site

Condition: new, The devices from the AL-KO POWER VAC series are used wherever high suction power and a large air volume flow are required. Typical applications include chip extraction from saws in window manufacturing or direct extraction of milling chips on multi-head welding machines. Functionality: A negative pressure of up to 10,000 Pa enables quick and safe extraction of chips and dust directly at the source. This ensures smooth production processes and consistently high product quality. The looped filters provide a high separation efficiency for both coarse particles and fine dust. It is also possible to connect a ductwork system to link multiple processing machines to the extraction unit. AL-KO POWER VAC devices are equipped with the proven AL-KO OPTI JET filter cleaning system and come standard with a control system featuring an integrated frequency inverter. This allows extraction performance to be adjusted at any time to meet operational requirements. Applications: - Cleaning suction of floors, machinery, and workstations in industrial and craft settings - Extraction from hand-held processing machines during grinding, milling, sawing, and deburring - Collecting dry dust up to dust class ST1, direct extraction from small processing and work machines Advantages: - High suction performance up to 10,000 Pa negative pressure - Optimal filter cleaning with jet pulse cleaning (AL-KO OPTI-JET®) - CLEAN dust barrier for improved cleanliness and health protection - Compact, modular design for minimal space requirements - Energy savings with standard frequency inverter for precise adjustment of extraction performance Dcsdpfewwt E Uox Am Reh - Low operating noise – integrated silencer and sound-absorbing elements enable installation directly in the work area

Condition: new, Year of construction: 2025, The POWER UNIT 160 P is an approved clean-air dust extractor in a self-supporting sheet metal construction made from coloured powdered sheet steel. The device conforms to the most recent regulations, is certified with the BG–GS test seal, in accordance with GS-HO-07 (with endorsement for residual dust concentration test seal H3) and, thus, it can be directly installed in the workroom without additional fire or explosion protection measures. Therefore, it provides an ideal production condition with healthy air at the workplace. It is also suitable for use in workshops with a utilization factor of 2-4 machines (dependent on the required volume-flow), as well as to supplement a stationary plant as local extraction for universal application with different materials. The small external dimensions also allow the dust extractor to be installed in confined workshops. Technical data POWER UNIT 160 P : • Intake connection 160 mm • Motor rating 2.2 kW; 3 Ph; 400 V/ 50 Hz • Max. volume-flow 2,000 m³/h • Volume-flow at the connection at 20/ 22 m/s 1,448/ 1,592 m³/h Dcodpfx Amefydzbo Roh • Vacuum at the connection at 20/ 22 m/s 2,503/ 2,399 Pa • Filter area 9.1 m² (23 x Ø 125 mm, 1000 mm long) • Filter cleaning Compressed air cleaning • Filter material Cat. M, el, white washable • Impact on filter 160 m³/m²/h • Max. noise level 71 dB(A) • Residual dust content H3 / (ᐸ0,1 mg/m³) • Swarf collection volume ca. 165 (241) liter • Basic controls Micro SPS-Logo Siemens without display • Electrical connections 5 m connection cable with CEE plug 5 poles, 16 A, with phase inverter • Compressed air supply ½” standard plug compressed air consumption 108 Std.l/ 6 bear • Volume flow monitoring differential pressure cell with warning lamp on control box • Dimensions (L x W x H) 1,688 x 830 x 2,050 mm • Undercarriage 4 plastic castors 125 mm, two of them steerable, one with locking • Weight 340 kg • Design / Control side choice right / left • Finishing RAL 7001 (silver grey) and RAL 7035 (light grey)

Condition: new, - NEW -- Compact design, space-saving- Powerful, high suction power, low operating costs- Easy to maintain, long filter service life- Universally applicable, variable accessories- High flexibility- Mobile design- Extraction technology with front panel system- mobileTechnical specifications:- Intake manifold 1000x1000 mm- Motor rating 1.5 kW, 3.4 A, 3 Ph, 400V/50 Hz/1410 rpm- Flow rate 4600 m³/h- Usable negative pressure 500 Pa- Filter surface 1.0 m²- Filter cleaning none- Filter material green (1 piece)- Filter load 4600 m³/m²/h- Residual dust content Max. degree of separation approx. 97%- Automatic control none- Electrical connections 1-stage switch, +5 m connection cable with power plug, 1-pole, 10A fuse on site,- Compressed air supply None- Max. sound pressure level 72 dB(A)+measurement uncertainty 4 dBDIN EN ISO 11201 free field measurement- Running gear 4 castors with thermal coating, D=75 mm- Dimensions (W/H/D) mm 1012x1405x915 (1887x1405x1144)- Weight device approx. 175 kgItem No. 195 627 01 Dedpov Svcyjfx Am Rjch

Condition: new, Technical data:Max. Flow rate in m3/h: 6.800Max. Negative pressure in Pa: 500Rated motor power: 0.75/ 2.1 kW ex (suitable for installation in zone 2 according to ATEX)Filter area in m2: 2Dimensions ( W x D x H) in mm: 2,971 x 1,405 x 1,131Connection diameter: 300 mmSwitch: 2-stage5 m cable with plug and throttle valve Dcsdpfx Asvwfm Sjm Rsh

Condition: used, filterintermediate filter/sparging filtervacuum unitsuitable for container feedingused, good condition,manufactured by  ALKOlength 1400 mmwidth 1400 mmheight 3000 mmsuction- /blow in connecting piece D 2 x 250 mmcoveringwith discharge / fan ca. 2,0 KW D 160 mmair recirculation possiblewith fans 2 piece2 x 2,0 kWdiameter D 250 mmlocated in  97447 Gerolzhofensale in current condition as seen- free on truck - Dodevxa N Depfx Am Rsch

Condition: new, - NEW -- Compact design, space-saving- Powerful, high suction power, low operating costs- Easy to maintain, long filter service life- Universally applicable, variable accessories- High flexibility- Mobile design- Extraction technology with front panel system- mobileTechnical specifications:- Intake manifold 2000x1000 mm- Motor rating 2.2 kW, 4.6 A, 3 Ph, 400V/50 Hz, 1430 rpm- Flow rate 6800 m³/h- Usable negative pressure 500 Pa- Filter surface 2.0 m²- Filter cleaning none- Filter material green (1 piece)- Filter load 3400 m³/m²/h- Residual dust content Max. degree of separation approx. 97%- Automatic control none- Electrical connections 2-stage switch, +5 m connection cable with power safety plug, 1-pole, 10A fuse on site,- Compressed air supply None- Max. sound pressure level 72 dB(A)+measurement uncertainty 4 dBDIN EN ISO 11201 free field measurement- Running gear 4 castors with thermal coating, D=75 mm- Dimensions (W/H/D) mm 1912x1405x946 (2969x1405x1218)- Weight device approx. 248 kgItem No. 195 752 01 Dcjdov Svc Hepfx Am Reh

Condition: used, Year of construction: 2001, from government authority used, top condition, low hours Manufacturer: AL-KO Model: Mobil Jet 100 Year of manufacture: 2001 Machine no.: 2433306444 Clean air unit / negative pressure GS dust-tested CE type-tested Motor: 1.5 kW Connection diameter: 100 mm Pressure: 1572 Pa Air output: 770 m³/h 1 collection drum 50 cm Dedpfx Amoyclxve Rech Manual filter cleaning Filter pressure monitor New price approx. 3,600.00 EUR Space required approx. 1200 x 1700 x 2000 mm Weight approx. 120 kg Location: 97447 Gerolzhofen, loaded free, unpacked Delivery in current as-inspected condition, without guarantee or warranty

Condition: new, functionality: fully functional, Year of construction: 2025, load capacity: 5,000 kg, fork thickness: 80 mm, fork width: 180 mm, Telescopic crane 5000 kg with a load center of 600 mm Dedpfx Ameiuh I As Rech Telescopic length on the hook: 3600 mm with a payload of 950 kg See load diagram for load center capacity One swivel hook with a payload of 5000 kg with a shackle One swivel hook with a payload of 3000 kg with a shackle Height adjustable via grid Galvanized bolts secured with a rope Fork pockets for forks up to 180 x 80 mm Safety chain to prevent the crane from slipping

Year of construction: 1998, condition: good (used), Sawdust extractor,dust extractor,self-cleaning filter,vacuum ALKO ECO JET Filter cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device. Ideally suited for all kinds of dry dust in various technological processes. It is possible to replace the filter bags according to the requirements and purpose. Year of manufacture 1998 Dcsdpfxoiu Hq De Am Rsh 5.5 Kw fan located on the clean side which reduces the risk of explosion initiation to a minimum Inlet diameter 250 mm Capacity 4320 m3/h Filtration area 29 m2 Vacuum 3700 Pa Extinguishing system "fireman" Air return ATEX flap flap noise damper Extinguishing system *firefighter*. Control cabinet with automation to run 8 machines Technical documentation Dimensions of Extraction: Height - 3.05 m Base width - 2.75 m x 1.00 m

Condition: used, Alko sawdust extraction unit, 11 kW motor, Dcodpjyly Ikefx Am Rsh Capacity 8,700 m3, 4 sawdust containers, Suitable for indoor or outdoor use, Warm air recirculation, Weight 1,290 kg.

Condition: new, empty load weight: 7,250 kg, maximum load weight: 28,750 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, total length: 2,550 mm, total height: 138,600 mm, suspension: air, construction height: 4,000 mm, Equipment: ABS, | Krone Dry Liner box trailer | Spare wheel holder | Krone axles with disc brakes | Anchor rails for load securing | 13 pairs of lashing rings recessed into the floor | Interior height 2715mm | Loading height 2650mm | Tires 385/65R22.5 | Daily registration 6.2024 | Rental possible. Errors, input and advance sales excepted. Dcsdpfxsl Sn Dfe Am Reh