Used Ta Instruments Thermomechanical Analyzer for sale (11,905)

Condition: used, empty load weight: 2,320 kg, maximum load weight: 12,080 kg, overall weight: 14,400 kg, axle configuration: 2 axles, first registration: 01/2020, next inspection (TÜV): 12/2026, loading space length: 4,000 mm, loading space width: 1,920 mm, loading space height: 380 mm, suspension: steel, tire size: 285/70R19.5, color: black, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2 axles, tandem axle, leaf spring suspension, ABS (anti-lock braking system), front supports, rear supports, side aluminum fender, adjustable drawbar. Itsdpfx Aoy Uzfksa Ish Superstructure: Tandem trailer for the transport of roll-off containers, Gigant axles, drum brakes! Loading height approx. 780mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, empty load weight: 2,980 kg, maximum load weight: 8,920 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 01/2016, loading space length: 7,000 mm, loading space width: 2,450 mm, loading space height: 930 mm, suspension: steel, tire size: 235/75R17.5, wheelbase: 990 mm, color: silver, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2 axles, BPW axles, tandem, air suspension, ABS (anti-lock braking system), lashing points, loading ramps can be attached, front support, rear support, side aluminum fender, storage box, drawbar adjustable in height. Wheelbase: 990 mm, Body: tandem flatbed with loading ramps, 2x BPW axle, drum brakes, galvanized frame, loading ramps available for an additional charge of EUR 1,000.00, currently 10.9 tons. Iedpfoy Tpw Ejx Aa Isth Loading height approx. 930 mm. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, empty load weight: 3,650 kg, maximum load weight: 10,750 kg, overall weight: 14,400 kg, axle configuration: 2 axles, first registration: 07/2011, loading space length: 5,000 mm, loading space width: 2,430 mm, loading space height: 900 mm, suspension: air, tire size: 285/70R19.5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2-axle, tandem, air-suspended, ABS (anti-lock braking system), flap, lashing eyes, U-protection, front support, rear support, pendulum flaps, height-adjustable drawbar Body: Tandem 3-sided tipper trailer with aluminum drop sides 2x Gigant axles, drum brakes! Drive-on ramps available for an extra charge of 990.00€ net! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Iedpfx Aaeth Uave Ieth - .

Condition: used, empty load weight: 2,910 kg, maximum load weight: 7,590 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 09/2009, next inspection (TÜV): 04/2025, loading space length: 4,500 mm, loading space width: 2,200 mm, loading space height: 450 mm, suspension: steel, tire size: 235/75R17.5, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, steel body, 2 axles, BPW axles, tandem, leaf spring suspension, ABS (anti-lock braking system), lashing eyes, underbody protection, front support, rear support, swing flaps. Iodpfx Aaov S H Sfo Ioth Construction: Tandem 3-way tipping trailer with ramp shaft. Loading ramps available for an additional charge of €900.00 net! ACCESSORIES INFORMATION IS PROVIDED WITHOUT GUARANTEE. Subject to changes, prior sale, and errors! - .

Condition: used, maximum load weight: 5,900 kg, overall weight: 9,000 kg, axle configuration: 2 axles, first registration: 05/2020, loading space length: 5,370 mm, loading space width: 2,470 mm, loading space height: 400 mm, loading space volume: 5 m³, Equipment: ABS, * ABS * 5-chamber rear lights * Height-adjustable towing device * Gigant axles * Front landing gear ----Superstructure: Low-loader trailer, loading height approx. 870mm, rear sloped, access height approx. 780mm, spring-assisted steel side walls left and right, wooden floor, lashing eyes and lashing rings. Spring-assisted and laterally adjustable loading ramps with hot-dip galvanized grating, slip-resistant design (length approx. 2,600mm), automatic rear support coupled with ramp operation, plastic toolbox in front of the bulkhead. Chassis, front wall, drawbar, rear wall, ramps and stakes hot-dip galvanized. Itjdpfx Aasyncyhs Ioh Sale to commercial customers only. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!! ALL INFORMATION PROVIDED WITHOUT GUARANTEE, INCLUDING EQUIPMENT AND ACCESSORIES. The basis for all purchase contracts, invoices, proforma invoices, orders, and sales discussions are our General Terms and Conditions (see legal notice).

Condition: used, Year of construction: 1999, Volumetric flow rate ISO 7183 A1: 0.6 m³/minPressure dew point: 3°CPressure loss: 0.07 barPower consumption at 100% flow: 0.29 kWPower consumption at 50% flow: 0.17 kWOverpressure: 3 to 16 barAmbient temperature: +3 to +43°CMax. inlet temperature (compressed air): 55°CDimensions (W x D x H): 630 x 484 x 779 mmWeight: 70 kgCompressed air connection: G 3/4Condensate drain connection: G 1/4Electrical supply: 230 V / 1 / 50 HzStorage location: Itedpfx Aaoy Ernwe Ioh

Condition: used, maximum load weight: 19,510 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 11/2007, next inspection (TÜV): 07/2026, Equipment: ABS, * ABS * Lift axle * BPW ECO-Plus axles * Disc brakes * 5-chamber tail lights * Duomatik air connection ----Body: Esterer tank body (year of construction 2007), GGVS/ADR class 3 for diesel + heating oil, capacity: 24,170 liters, 3 compartments (7,980/5,770/10,420), next tank inspection (L) 07.2028, next tank inspection (P) 07.2031, top and bottom filling. Tank material AA5186H111 Elongal. ADR approval valid until 07.2026 Sale only to commercial businesses. IN CASE OF EXPORT, ONLY THE NET PRICE IS TO BE PAID!!!!! ALL INFORMATION WITHOUT GUARANTEE, INCLUDING EQUIPMENT AND ACCESSORIES. Our general terms and conditions (see imprint) form the basis of all purchase agreements, invoices, proforma invoices, orders, and sales discussions. Itjdjzb Sdvjpfx Aa Ijh

Condition: like new (used), functionality: fully functional, AUTOMATIC CUTTING SAW machine for solid wood model OMEC TA 185 second hand machine working condition : excellent Itodpfxozfggfs Aa Ijh CE mark: YES instruction booklet: YES cutting diagram . see attachment with rollers tracks ( as in photo ) n.01 stop with blade diam.mm.550 motor power Hp 10 volt. 380/50

Condition: good (used), Year of construction: 1994, functionality: fully functional, cam-controlled automatic lathe including bar loader magazine - max. bar diameter 25 mm - tailstock - 2 vertical tool holders - 2 horizontal tool holders - weight approx. 650 kg Itodey R Tfbepfx Aa Ieh - dimensions (LxWxH) approx. 1000 x 600 x 1500 mm - bar feeder IEMCA AS 325/62 (max. bar length 6,200 mm)

Condition: used, axle configuration: 3 axles, first registration: 02/2022, Equipment: ABS, Kässbohrer slurry tanker * First registered: 01.02.2022 * Slurry tank semi-trailer * Disc brakes * 30 cubic meters * Damaged, as can be seen in the photos Ijdoza Nucspfx Aa Ieth * All information provided without guarantee

Condition: used, mileage: 319,000 km, power: 188 kW (255.61 HP), first registration: 01/2019, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,500 mm, fuel: diesel, brakes: engine braking, color: white, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 9,600 mm, total width: 2,550 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, loading space length: 7,500 mm, loading space width: 2,500 mm, loading space height: 2,450 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, spoiler, tail-lift, Front axle: Max. axle load: 8000 kg; Tyre profile left: 50%; Tyre profile right: 50%; Suspension: leaf suspension Rear axle: Double wheels; Max. axle load: 11500 kg; Tyre profile left inner: 50%; Tyre profile left outer: 50%; Tyre profile right outer: 50%; Tyre profile right outer: 50%; Suspension: air suspension Number of cylinders: 6 Itedpfjy S Uv Rjx Aa Ijh Engine capacity: 7.698 cc Empty weight: 8.860 kg Carrying capacity: 11.640 kg GVW: 20.500 kg Tail lift: Dhollandia, 2500 kg Registration number: 33-BLT-9 = Additional options and accessories = - Aluminium fuel tank - Camera system - Heavy duty engine brake - Lock diff - Outside temperature display - Radio - Reversing camera - Roof spoiler - Side door - Visor = Remarks = Dutch Truck

Condition: used, first registration: 01/2023, driver cabin: other, gearing type: other, Year of construction: 2023, Other: * Trade-in and purchase of vehicles and machines possible. * Sales price excluding transportation and transfer. * No liability for printing & typing errors. * Errors, changes and prior sale reserved. Ijdpfx Aezcfz Dsa Isth * Offer subject to change. * Photos may differ. Price applies to existing condition. * All information without guarantee. - .

Condition: good (used), Code: 0253 Brand: LARI E LARI - ITALY Model: FR 20 - TA - CE Standard Working center for milling and boring on wood or plastic and composite materials, wooden doors, window frames - CE Standard Technical data: X-axis working stroke 3250 mm Y-axis working stroke with 90° cutter 130 mm Z-axis working stroke with 0° cutter 290 mm Z-axis working stroke with 90° cutter 175 mm X-axis working speed mt/min 40 Y-axis working speed mt/min 30 Z-axis working speed mt/min 30 Hinge boring inserting unit: Male/Female Speed control inverter Probe Tool holder collet ER 25 Power of anuba head drilling electric spindle 2,2 Kw Anuba head inclination -10 +90° Electric spindle for milling: 2,7 Hp at 18,000 rpm Collet chuck ER 32 Variable speed via inverter Iodpfx Aasx A Hdxj Ioth Inclination from 0 to 90° for both vertical and horizontal machining Machine computer: numerical control - Windows XP operating system - color video - alphanumeric keyboard - USB port - interpolation Work table with 3 sliding clamps for locking workpieces Installed power 12 Kw Suction mouth diameter 120 mm Compressed air 7-8 bar Overall dimensions for transport mm 4100 x 1500 x 2100 h Machine weight 1400 kg Electrical panel 250 kg

Condition: good (used), Code: 0395 Brand: JOWAY - TAIWAN Model: P - 3200 TA - CE Standard Panel saw with tilting blade and scoring unit for precise cutting of panels, furniture, doors, window and door frames, kitchens, plastics, composite materials and various – CE Standard Technical data: Anodised aluminium caqrriage length 3200 mm Dimensions of ground steel table mm 620 x 1000 Blade diameter 350 mm Hole 30 Max cutting height at 90° mm 100 Max cutting height at 45° mm 70 Motor power 7,5 Hp Speed rpm 3000/4000/5000/6000 Scoring unit blade diameter 120 mm Hole 22 - Motor power 1 Hp Itedpfxezaawns Aa Ijh Dual control panel for machine start-up Electric blade lifting Programmed blade tilt Electrically adjustable scoring unit Parallelogram blade guard Overall dimensions of assembled machine mm 3200 x 3400 x 1400 h Overall dimensions for transport mm 3200 x 2100 x 1400 h Weight kg 1300

Condition: used, Three-phase power meter: current, voltage, and power measurement; long-term monitoring; energy measurement 3-phase power measurement device, ammeter, voltmeter, digital measuring instrument, active power, apparent power, reactive power BEHA Type UNITEST Power Analyzer 93555 For measuring voltage, current, active power, apparent power, reactive power, power factor, phase angle, frequency measurement, phase sequence detection, energy measurement, and harmonics measurement. Display: LC multifunction display with backlight Refresh rate: approx. 2 sec. Data logger: 512 KB non-volatile memory (max. 21,000 readings, max. 10 data sets) Sampling rate: 5 s, 30 s, 1 min, 2 min. (adjustable) Data transmission: via optically isolated RS232 interface Manual memory: max. 99 measurements Overvoltage category: CAT III 600 V Power supply: 8 x 1.5V AA batteries or mains adapter 230VAC / 12VDC (batteries not included) Voltage measurement: 3 input channels with common reference point "N" Measuring range: 0 - 600 V RMS Display range: 0 - 999.9 V RMS Resolution: 0.1 V Mains frequency: 50 Hz Current measurement: Measuring range Input I1, I2, I3: 3 - 999.9 A Input I4: 3 - 250 A Display range: 0 - 999.9 A Resolution: 0.1 A Clamp opening: 40 mm Iedpfox A Imzex Aa Ieth Active power: Selectable display of the active power of an individual input or the total value Display range: 0 - 999.9 kW Resolution: 0.1 kW Apparent power: Calculated from the RMS values of voltage and current Display range: 0 - 999.9 kVA Resolution: 0.1 kVA Frequency measurement: Range: 45...80 Hz Resolution: 0.1 Hz Accessories: - Carrying case - Operating manual - 4 measuring clamps - 4 test leads with crocodile clips - RS232 adapter cable - Mains adapter 230VAC / 12VDC Overall dimensions (W x H x D): 370 x 270 x 170 mm Total weight: 3 kg Device tested, fully functional. Note: The housing of 2 measuring clamps is damaged and the battery compartment shows some oxidation (see photos).

Condition: used, Year of construction: 2014, operating hours: 33,100 h, machine/vehicle number: 2941, Control system: HEIDENHAIN TNC530, travel range X/Y/Z: 3,500 x 1,200 x 1,250 mm, swivel head: 2.5°, tool holder: SK50, 60 tool positions, chip conveyor: URRETXU 11-20132, serial number: 4855492004U5E2, filter system: JUMA+GAIN, serial number: 7136, capacity: 60 l/min, year of manufacture: 2013. Ijdpfx Ajy T Nx Nsa Ieth

Condition: excellent (used), functionality: fully functional, Rohde & Schwarz UPV Audio Analyzer with the following options: UPV-K1 UPV-K4 UPV-U2 UPV-B2 Ijdpjx H Ucaofx Aa Ioth UPV-B3 UPV-B42 UPV-B48 Operating System: Windows XP #8410

Year of construction: 2023, condition: good (used), functionality: unexamined, machine/vehicle number: SRV54341, Ladies and Gentlemen, We are selling the Hitachi FT230 XRF analyzer described and photographed here. Excerpt from the manufacturer: Each individual element of the FT200 series has been developed to drastically reduce the analysis time. Automated focusing reduces sample loading time Intelligent recognition with the Find My Part™ function automatically sets up the complete measurement routine Sample view is displayed over a large part of the screen for excellent visibility Self-diagnostics confirm the condition and stability of the device Seamless integration with other software and easy data export Intuitive and easy to use thanks to a new user interface Powerful: simultaneous measurement of up to four layers and substrates Designed for demanding production or laboratory environments Complies with ASTM B568 and DIN ISO 3497 standards Supports you in meeting the specifications for ENIG (IPC-4552B), ENEPIG (IPC-4556), Immersion Sn (IPC-4554) and Immersion Ag (IPC-4553A) Further information: Detector: Silicon Drift Detector (SDD) Element range: Al (13) - U (92) Stage travel: 250 x 200 mm Motorized Z-axis movement: 205 mm Maximum sample size: 500 x 400 x 150 mm Laser focus: Standard Coating thickness analysis: possible RoHS screening: possible Further information and images of the machine are available on request. Disclaimer Itodpfxsuwkr Ds Aa Ioh The machines offered are sold "as is" and "without warranty". Any express or implied warranties, including, but not limited to, warranties of merchantability or fitness for a particular purpose, are hereby expressly disclaimed. Seller assumes no responsibility for the operability, reliability or accuracy of the machine. It is the buyer's responsibility to thoroughly inspect the machine prior to purchase and ensure that it meets his requirements. Any descriptions or specifications of the machine are for information purposes only and may contain inaccuracies or errors. The seller shall not be liable for any such inaccuracies or errors and assumes no obligation to update or correct such information. Buyer agrees that Seller shall not be liable for any damages or losses arising directly or indirectly from the purchase, use or inability to use the machine, including, but not limited to, lost profits, business interruption or consequential damages. Any repairs or modifications to the machine after purchase are the sole responsibility of the buyer. Seller shall not be liable for damages caused by improper repairs or modifications. By purchasing the machine, the buyer expressly agrees to the terms of this disclaimer and waives any claims against the seller in connection with the purchase or use of the machine.

Year of construction: 1996, condition: used, functionality: fully functional, machine/vehicle number: NF-1706/2896, A Novotecnic candle filter system utilizing the precoating principle is available for the treatment and purification of grinding oil. Operating fluid: grinding oil, flow rate: 50 l/min, tank capacity: approx. 800 l, control: Siemens PLC. Documentation available. On-site inspection possible. The filter system was used in our facility to filter carbide from the coolant oil during tool grinding. Since the system is equipped with a drying unit, the carbide powder could be marketed effectively. Itsdpfx Asy Sw Rqsa Ioh

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning diameter: 460 mm, spindle speed (max.): 3,500 rpm, controller model: Fanuc 32iTB iHMI, counter spindle speed (max.): 4,500 rpm, CMZ turning and milling center including GL20II gantry loader! TECHNICAL DETAILS Turning diameter over bed: 760 mm Turning diameter over cross slide: 600 mm Maximum turning diameter: 460 mm Iodpfxey Hk Nie Aa Ieth Distance between centers: 689 mm Distance between chucks: 625 mm Travel in X-axis: 310 mm Travel in Z-axis: 640 mm Travel in Y-axis: +70/-50 mm Travel in B-axis: 640 mm Rapid traverse rates: 30/30/15/30 m/min Maximum spindle speed: 3,500 rpm ASA 8" A2 Maximum counter-spindle speed: 4,500 rpm ASA 6" A2 Spindle bearing outer: 200 mm Spindle bearing inner: 130 mm Spindle bore: 86 mm Bar passage: 78 mm Number of tool positions: 12, all driven, 12,000 rpm Tool holder: 25x25 (50) MACHINE DETAILS Operating hours: 42,654 h Total running hours: approx. 35,000 h Control system: Fanuc 32iTB iHMI Dimensions & Weight Machine weight: 6,500 kg Machine dimensions (L x W x H): 2,542 x 1,760 x 1,880 mm EQUIPMENT Gantry loader

Condition: used, Year of construction: 2023, turning diameter 120 mm Ijdoy Nfdmspfx Aa Isth turning length 640 mm control Fanuc 32iT total power requirement 45 kW weight of the machine ca. 8,5 t

Condition: used, Year of construction: 2009, travel -x axis 2.500 mm travel -y axis 1.000 mm travel -z axis 1.250 mm control HEIDENHAIN - iTNC 530 turning speed range 20 - 4.000 U/min with NC rotary table 1.000 x 1.000 table surface area 2.700 x 850 mm numbers of positions in the tool changer 40 tool taper SK50 CNC Bed Type Milling Machine | SORALUCE - TA-25-A equipped with NC-rotary table, radio measuring probe and 40-way tool changer. Ijdpfxey E Txwe Aa Ieth The machine is in good condition and can be inspected under power. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. The machine videos from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: A25A | TA-25 A | TA 25 A

Condition: ready for operation (used), Year of construction: 2000, Continuously adjustable dosing volume: 60-1050ml, length: 1750mm, width: 650mm, height: 1700mm. Equipment: mounted on a stainless steel frame, mobile with four swivel castors, manual feeding and removal of bottles, self-priming, with a dipping device for the filling tube, automatic circulation cleaning, homogenizing and refining of curd possible, usable products: liquid, pasty, cold and hot milk, yogurt, curd, cream cheese, fondue, honey, salad dressings, mayonnaise, jam, cake batter etc. An on-site inspection is possible, not under power. Iodpfey Uyd Eex Aa Isth

Condition: excellent (used), Year of construction: 2014, operating hours: 4,688 h, functionality: fully functional, turning length: 600 mm, turning diameter: 460 mm, spindle motor power: 22 W, spindle speed (min.): 4,000 rpm, spindle bore: 66 mm, travel distance Y-axis: 140 mm, 12-position turret Iodpfxey T H I Us Aa Ioth Motorized tool speeds: 12,000 rpm Chip conveyor Tool measuring arm Parts collector Automatic tailstock

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, spindle speed (max.): 4,000 rpm, spindle speed (min.): 20 rpm, table width: 850 mm, table load: 5,000 kg, table length: 2,700 mm, overall weight: 15,500 kg, year of last overhaul: 2024, RefurbishmentPLUS by Dornhöfer The difference. Including installation and commissioning! MAIN TECHNICAL DATA Year of manufacture: 2007 Capacities / Travel: Longitudinal (X): 2,500 mm Vertical (Y): 1,250 mm Cross (Z): 1,200 mm Table size: Length: 2,700 mm Itsdpfxeun Nnqj Aa Ijh Width: 850 mm Number of T-slots on the table surface: 6 T-slot width: 22H12 mm Reference slot: 22H8 mm Distance between slots: 140 mm Max. table load: 5 t/m² Paint finish: RAL 5011 (steel blue) and RAL 7035 (light gray) Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 form A Main drive: Drive power: 100% duty cycle KW24 Spindle speed range: Spindle speed: 20-4,000 rpm Torque: 479 Nm Feed rates: X, Y, and Z axes mm/min 10-10,000 Max. rapid traverse speed: X, Y, and Z axes mm/min 25,000 Weight: approx. 15,500 kg BASIC MACHINE EQUIPMENT: Heidenhain iTNC 530 HSCI Automatic milling head, diagonal H200 Chip conveyor Coolant system STANDARD EQUIPMENT: - Portable electronic handwheel HR 510 with 3m spiral cable - Hydraulic counterbalance acting directly on the vertical slide - 3D thermal expansion compensation for Heidenhain CNC contouring controls - Complete splash guard enclosure consisting of two front doors and one rear door for operating the machine from the front and rear. All doors are equipped with viewing windows. - Heidenhain AC drive motors in all axes with diagonal drive technology - INA RUE 45 linear guideway system in all axes with central lubrication - Ball screws (IT5) in all axes - Heidenhain direct linear measuring system in all axes - Telescopic covers for the X-axis guideways - Automatic cyclic lubrication for all axes and motion components - Work area lighting Refurbishment+ – what does that mean? The RefurbishmentPLUS line offers you a machine that has been uncompromisingly restored to its original technical and visual condition. All assemblies have been completely disassembled, repainted, and rebuilt with new, original spare parts. Cables, hydraulics, guides, spindles, rolling bearings – everything new!