Used Systronic Sys 153/2 for sale (78,995)

Condition: ready for operation (used), Indramat TDM 2.1-15-300-W0 AC servo controller, serial number as shown in the photo, used, professionally and completely refurbished and tested, with a 12-month warranty, 100% functional, scope of delivery as shown in the photos. Fpedpfx Aiji Ebryjven

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity: 9,000 kg, total length: 17,000 mm, load per truss pair (max.): 3,000 kg, number of shelf rows: 2, frame height: 3,500 mm, frame width: 1,100 mm, shelf height: 3,500 mm, shelf length: 8,500 mm, support length: 2,700 mm, 2 rows of pallet racks (4 x M35112711-3) each 8.5 m long, 3.5 m high, 1.1 m deep, each with 3 bays, 2.7 m wide, each with 3 beam levels, shelf load 3000 kg. - 8 frames (RM3511 - RAL5019) - 16 base plates, shims, and screws - 32 ground anchors (ZZBA1210) - 36 individual crossbeams (T27114 - RAL2008) - 4 collision protection / impact protection (ZRS40901) - 2 load plates (BSMcP) Frames bolted, not pre-assembled Fodpfx Asv Ungceivepn Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: good (used), Polar Mohr RA-2 Jogger with roller and scale The machine is in perfect condition, ready to work. Technical data: Max format: B2+ Stack height: 150mm Weight: 450kg (jogger) + 150kg (weighing device) Power supply: 400V Air squeezing roller Air table Possibility of shaking to the right/left Adjustable angle of inclination Adjustable shaking frequency (on the inverter) Adjustable force and speed of the air squeezing roller. Chrome table surface The machine is additionally equipped with a Bizerba sheet weighing system that allows for counting sheets on the machine, taring, packaging, etc. Fsdpfx Aisz N R U Hsvopn

Condition: good (used), Polar Mohr R-2 Paper Jogger Machine in very good condition, lightly used. Technical specifications: Maximum format: 820x720mm Stack height: 150mm Weight: 450kg Fedpfx Aioz Rk H Sjvepn Power supply: 400V Air table Right/left shaking option Tilt angle adjustment Jogging frequency adjustment (inverter) Chrome table surface Pneumatically controlled flaps

Condition: new, Condition: New Fedoy S Du Aepfx Aivjpn PSEN protective door system sg2c-3LPE + PSEN sg2 actuator

Condition: used, functionality: fully functional, In this offer you buy a used trimmer "Canon 2-Knife Trimmer A1" Object of sale: 1 x Canon 2-knife trimmer A1 suitable for various Canon models. Condition: This offer is for a used device, which may show signs of use (minor scratches or yellowing). The device has been tested for function Fpsdpfxewpd Tyj Aivsn Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, controller manufacturer: Siemens, laser power: 20,000 W, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, High-spec YAWEI HLF1530 fiber laser machine (20kW). Available for immediate delivery. Specifications: Power: 20kW Sheet size: 3000 x 1500mm Automatic shuttle table with light barriers Precitec Auto Focus Procutter 2.0 cutting head with sheet measurement and nozzle cleaning Automatic nozzle changer Automatic nozzle centering Max Photonics 20kW resonator Siemens ONE control system with LAN/USB Siemens drives THK guideways Small parts conveyor belt Ball-transfer table for easy, scratch-free sheet handling 24-month warranty CAD/CAM software Commissioning Delivery (within Germany) Training CE certification Optional loading and unloading system available. This is a new machine currently in stock. An identical model is available for live testing at our facility at any time. We have been distributing YAWEI machines for over 20 years. We handle everything in-house, from transport and training to maintenance and warranty services. Give us a call! Fpjdpfszx Uw Eox Aivjn

Condition: excellent (used), axle configuration: 2 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, first registration: 06/2010, loading space length: 7,700 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, total width: 2,600 mm, color: other, Year of construction: 2010, Equipment: ABS, = Additional options and accessories = - Air Suspension - Drum brakes Fpedozzb Suspfx Aivsn - SAF Assen = More information = Rear axle 1: Max. axle load: 10000 kg Rear axle 2: Max. axle load: 10000 kg Empty weight: 6.140 kg Carrying capacity: 13.860 kg GVW: 20.000 kg Technical condition: very good Visual appearance: very good Registration number: 41-WG-FL

Year of construction: 2017, condition: ready for operation (used), 2 units Thermo Scientific Heracell 150i CO2 incubators, No. 439 + 440 Internal dimensions: 450mm x 450mm x 600mm (W x D x H) External dimensions (per unit): 640mm x 820mm x 870mm (W x D x H) Year of manufacture: 2017 Temperature range: 3°C - 55°C Decontamination routine at 90°C. You are welcome to arrange an inspection appointment. We can organise affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided you have a valid VAT ID. Subject to prior sale. Visit our shop to view more of our listings. All company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Fpjdjywxqvspfx Aivon Technical data may vary and errors in the description of the item may occur; such errors and deviations are reserved.

Condition: used, mileage: 780,761 km, power: 246 kW (334.47 HP), first registration: 05/2011, fuel type: diesel, axle configuration: 6x2, wheelbase: 5,500 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro5, number of seats: 2, total length: 8,150 mm, total width: 2,550 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2011, Equipment: crane, General information Cab: single Registration number: 98-BTH-1 Technical information Number of cylinders: 6 Engine capacity: 7.146 cc Axle configuration Max. front axle load: 8000 kg Rear axle 1: Max. axle load: 11500 kg Rear axle 2: Lift axle; Max. axle load: 7500 kg Weights Fpjdpfx Aijy Nz Dpjvsn Empty weight: 13.650 kg Carrying capacity: 12.450 kg GVW: 26.000 kg Functional Crane: HMF 1680, behind the cab = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, mileage: 570,000 km, power: 300 kW (407.89 HP), first registration: 03/2010, fuel type: diesel, empty load weight: 16,500 kg, maximum load weight: 15,500 kg, overall weight: 32,000 kg, tire size: 315/80R22.5, axle configuration: 8x4, wheelbase: 4,200 mm, brakes: engine braking, color: red, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel, number of seats: 2, loading space length: 5,400 mm, loading space width: 2,420 mm, loading space height: 1,100 mm, Equipment: ABS, air conditioning, cabin, cruise control, differential lock, fog lights, low noise, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: Croatia, steel body, short cab, 1 comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, 16-speed gearbox, ABS (anti-lock braking system), traction control (ASR), constant throttle, auxiliary drive, differential lock, fog lights, leaf spring suspension, aluminum tank, low-noise G1, U-protection, tipper body, swing doors, sunroof, green environmental badge. Wheelbase: 4200 mm, body: interchangeable system consisting of a 3-sided tipper body and a Stetter concrete mixer body, approx. 9 m³, additional cost 8,000, 7.5t front axle, H7 13t rear axle, bevel gear 233, ABS switchable, Telligent braking system with ABS and ASR, disc brake on front and rear axles, rear axle stabilizer, steel bumper, PSM, pre-installation for toll collection, distributor cockpit, Telligent shifting II, construction site filter, on-board diagnostics 1.0, transmission oil cooler, double PTO MB 124-11B/1C flange + MPA M-speed, engine output rear 600Nm. VIN: WDB9333041L296831! Location: Fpedjzi Tuqspfx Aivjn Trgo-Auto d.o.o. Matoseva 86 0 Solin Hrvatska / Croatia All information is without guarantee as the vehicle is in transit! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: excellent (used), mileage: 280,400 km, power: 338 kW (459.55 HP), first registration: 06/2020, fuel type: diesel, axle configuration: 8x4, wheelbase: 4,200 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, Year of construction: 2020, Equipment: ABS, AdBlue, air conditioning, crane, cruise control, parking air conditioner, power assisted steering, power mirror, trailer coupling, = Additional Options and Accessories = - 2-pedal control - Adaptive cruise control - Air suspension - Air-suspended seats - PTO (Power Take-Off) - Radio/CD player - Rotating beacon - Sun visor - Toolbox - Xenon headlights - Central lubrication system - Tow hitch = Notes = 8x4 tridem Euro 6 D Lift/steer axle rear Hiab 18-ton roll-off tipper system Container locking mechanism Hiab X-HiDuo 228 E-3 crane 3 hydraulic extensions Remote control 5th and 6th control circuits with rotator 280,000 km Belgian registration In good condition! = Further Information = Axle configuration Front axle 1: Steered; Suspension: Leaf spring suspension Front axle 2: Suspension: Air suspension Fjdpfjzvhrwex Aivspn Rear axle 1: Suspension: Air suspension Rear axle 2: Lift axle; Steered; Suspension: Air suspension Weights Unladen weight: 16,904 kg Payload: 15,096 kg GVW (Gross Vehicle Weight): 32,000 kg Functional Crane: Hiab X-HiDuo 228 E-3, year of manufacture 2020, behind the cab Body manufacturer: Hiab UL718S56 Condition Technical condition: very good Optical condition: very good

Condition: used, mileage: 468,000 km, power: 315 kW (428.28 HP), first registration: 10/2015, fuel type: diesel, overall weight: 25,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,600 mm, loading space width: 2,500 mm, loading space height: 1,000 mm, Year of construction: 2015, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, Well-maintained construction crane truck MB 2543 with Palfinger loading crane PK 34002 Special equipment: Fpsdpfx Aez Dzvioivon Loading crane Palfinger PK 34002 with 6 telescopic booms and 2nd knuckle system PJ060 with 3 hydraulic telescopic booms as well as hydraulics for attachments such as a stone clamp or fork Rear axle with forced articulation Axle load front axle 8.0 t, audio system: CD radio (Bluetooth), exhaust pipe pointing downwards to the right, battery 220 Ah, batteries arranged one above the other, brake connection standard and DuoMatic, compressed air connection in the cab, compressed air horns (2) on the cab roof, electrical pre-wiring in the cab 24V / 100 A, cab floor with engine tunnel 170 mm, cab: cab height 600 mm, suspension: front springs 8.0 t, 3 leaves, fuel tank: 390 liters aluminum, reinforced engine brake, trailing axle steered, auxiliary drive MB 123-10c, parameterizable special module, frame lowering without air spring residual pressure control, retarder, seats in the cab: driver's seat, sprung comfort seat, sun visor outside, sunblind for side window, driver's door, 12V socket in the co-driver's footwell, additional 24V socket in the co-driver's footwell, auxiliary heater (water), oil cooler for transmission Additional equipment: Emission standard EURO 6, axle configuration: 6x2, trailer brake 2-line, connections on the left, trailer socket 24V / 15-pin, Antos, exterior mirrors electrically adjustable and heated, differential lock rear axle, compressed air tank steel, compressed air unit medium, cab: width 2.30 m, cab: tilting mechanism hydraulic, cab: M ClassicSpace, cab variant: ClassicSpace, storage compartment outside left, cab: steel-sprung, standard, suspension: leaf / air, window lifters electric, windshield tinted, generator 100 A, transmission 12-speed - type: G 211-12, urea tank (AdBlue): 60 liters, lifting roof manually (steel), rear axle bevel gear 440, info display 10.4 cm, body / structure: chassis, comfort locking system, steering assistance pump unregulated, air intake from the front, air compressor 2-stage, engine 10.7 liters - 315 kW R6 diesel (OM 470), engine compartment encapsulation, trailing axle single-tired, ramp mirrors, spare wheel, waste heat recovery, disc brakes front and rear axle, seat cover / upholstery: fabric, seats in the cab: co-driver's functional seat, splash guard front, stabilizer front axle, additional stabilizer, rear axle / trailing axle, socket cab 24V, tachograph / EU control unit, underbody cladding aerodynamically shaped, underrun protection front, preparation for toll collection, front axle cranked, water pump regulated, permissible gross weight 25.00 t Tire condition: front axle approx.: 80% middle axle: approx.: 70% rear axle (steered axle) approx.: 70% OBU preparation All 200mm lashing points installed in the vehicle floor! New vehicle floor made of 27mm seawater-resistant glued plywood

Condition: used, Year of construction: 2003, CLAMPING UNIT Clamping force: 500 kN Fpedpsz D U Ixofx Aivjn Locking force: 500 kN Distance between tie bars: 370 x 370 mm Max. opening stroke: 400 mm Min. mould height: 210 mm (160 / 135 mm with ZE 214) Max. distance between platens: 610 mm (660 / 710 mm with WA 211) Platen size (H x V): 540 x 530 mm Max. mould weight: 580 kg Max. mould weight on moving platen: 380 kg HYDRAULIC EJECTOR Ejector stroke: 125 mm Ejector force: 41.2 kN Ejector retraction force: 14.8 kN INJECTION UNIT (200) Screw diameter: 30 mm L/D ratio: 20 Injection pressure: 1900 bar Stroke volume: 106.0 cm³ Shot weight (PS): 94 g Max. dosing stroke: 150 mm Barrel heating power: 8.3 kW Hopper capacity: 20 l INJECTION UNIT – HORIZONTAL Max. nozzle stroke: 361 mm Nozzle penetration depth: 40 mm Nozzle contact force: 60 kN INJECTION UNIT – VERTICAL (parting line injection) A min / A max: 100 / 300 mm B min / B max: 100 / 468.5 mm Max. nozzle stroke: 368.5 mm Nozzle contact force: 15 kN GENERAL Oil tank capacity: 180 l Pump motor: 18.5 kW Total installed power: 26.8 kW Dry cycle time (EUROMAP 6a): 1.80 s – 224 mm / 1.80 s – 259 mm Net weight (without oil): 3400 kg Dimensions horizontal (L x W x H): 3.9 x 1.2 x 2.0 m Dimensions vertical (L x W x H): 3.9 x 1.2 x 3.4 m Noise level (idle / full load): 56 / 71 dB(A)

Condition: used, Year of construction: 2006, Demag Modular 250/560-1450 Euromap size: 2500-1450 CLAMPING UNIT Clamping force: 2500 kN Fpjdsz D Tnqepfx Aiven Locking force: 2750 kN Max. opening stroke: 575 mm Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg HYDRAULIC EJECTOR Ejector stroke: 180 mm Ejector force: 69 kN Ejector retraction force: 31 kN INJECTION UNIT (1450) Screw diameter: 70 mm L/D ratio: 20 Injection pressure: 1400 bar Stroke volume: 1039 cm³ Shot weight (PS): 940 g Max. dosing stroke: 270 mm Max. nozzle stroke: 400 mm Nozzle penetration depth: 20 mm Nozzle contact force: 110 kN Barrel heating power: 27.0 kW Electric screw drive (WA): 30 kW Hopper capacity: 110 l GENERAL Oil tank capacity: 500 l Pump motor: 30 / 37 kW Total installed power: 57 kW (64 kW with electric screw drive) Dry cycle time (EUROMAP 6): 2.35 s – 392 mm / 2.25 s – 392 mm Net weight (without oil): 11200 kg Dimensions (L x W x H): 5.7 x 1.7 x 2.2 m (length without injection unit overhang) Noise level: 74 dB(A)

Condition: refurbished (used), hydraulic feed drive unit, fully reconditioned, stepless variable; Fpodjirmulopfx Aivon 1 unit for KME 2 or BM - right execution - without additional pump - type 56-009

Condition: excellent (used), mileage: 611,000 km, power: 324 kW (440.52 HP), first registration: 01/2015, fuel type: diesel, axle configuration: 8x4, wheelbase: 5,300 mm, fuel: diesel, brakes: engine braking, color: grey, driver cabin: day cab, gearing type: mechanical, number of gears: 16, emission class: euro6, suspension: steel, total length: 9,720 mm, total width: 2,500 mm, total height: 3,850 mm, Year of construction: 2015, Equipment: ABS, Bluetooth, air conditioning, central locking, crane, electric window regulation, fog lights, power mirror, seat heater, trailer coupling, = Other Options and Accessories = - Aluminium fuel tank - Heated mirrors - Leaf suspension - Brake booster - High beam - Air conditioning - Refrigerator - Air-suspended seats - Air horn - Radio/CD player - Rotating beacon - Sliding sunroof - Seat heating - Sun visor - Toolbox - Xenon lighting - Towing hitch = Remarks = Vehicle with new engine, 0 km (invoice available) 8x4 Euro 6 Leaf suspension ZF 16-speed manual gearbox Palfinger T 20 roll-off tipper Palfinger crane PK 41002 EH E + Fly jib PJ 080 C 6x hydraulically extendable 4x hydraulically extendable Total working height: approx. 30 meters Hydraulic winch Radio remote control 4-point outrigger Fedpfx Aiezu Ryzjvepn 5th and 6th function Belgian registration In very good condition! Ready for immediate use. = Further Information = Transmission Transmission: ZF, 16 speeds, manual gearbox Axle configuration Suspension: leaf springs Front axle 1: steering Front axle 2: steering Weights Unladen weight: 21,106 kg Payload: 10,894 kg Gross vehicle weight: 32,000 kg Functional Crane: Palfinger PK 41002-EH E + Fly jib PJ 080C, mounted behind the cab Body manufacturer: Palfinger Hooksystem T20 Condition Technical condition: very good Visual condition: very good Additional information For more information, please contact G. Damen or W. Schischke.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Fpsdpfez Ebuzox Aiven Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, clamping force: 4,200 kN, screw diameter: 70 mm, clearance between the columns: 820 mm, displacement volume: 1,212 cm³, injection pressure: 1,877 bar, injection weight: 1,100 g, mold height (min.): 380 mm, ejector force: 96,000 N, ejector stroke: 230 mm, plate length: 1,200 mm, plate width: 1,200 mm, total length: 8,020 mm, total width: 2,210 mm, total height: 2,570 mm, overall weight: 21,000 kg, Closing force: 420 t Year of manufacture: 2015 Injection weight: 1,100 g Injection unit 2300 Screw diameter: 70 mm Screw L/D ratio: 20 Specific injection pressure: 1877 bar Injection volume: 1212 ccm Injection weight: 1,100 g Pump motor power: 51 kW Cylinder heater band power: 27 kW Closing unit Closing force: 420 t Tool plate dimensions: 1200 x 1200 mm Distance between tie bars: 820 x 820 mm Mold height: 380 - 825 mm Opening stroke: 770 mm Maximum mold distance: 1595 mm Fsdpfx Asz E Imweivjpn Ejector force: 96 kN Ejector stroke: 230 mm Weight: 21,000 kg Dimensions (m) L x W x H: 8.02 x 2.21 x 2.57 m Control: NC5 Equipment: - Hydraulic core pull: 4 (+ 2 additional connections on the stationary platen) - Hydraulic cascades: 4 - Hot runner adjustment points (zones): 40 - Servo-controlled activeDrive hydraulic pump (energy-efficient) - Adjustable p+v injection in a closed-loop system - Wear-resistant screw, bimetallic cylinder - Automatic mold height adjustment - Closing force adjustment - activeProtect mold protection - Switching to pressure-dependent clamping (WID) - PDE process data recording, 100% control - 8-circuit cooling water regulator - EUROMAP 67 interface - World Connect - remote service - DR 832 CNC robot and safety fence included

Condition: excellent (used), Catalog number 7757 TECHNICAL DATA Milling machine - spindle diameter 25mm - spindle height 120mm - interchangeable, tilting spindle (20 degrees) - spindle locking - adjustable up/down - original guide - table dimensions 1120x750mm - 4 speed settings - motor 3.8Kw Circular saw - max. blade diameter 350mm - spindle diameter 30mm - blade adjustable up/down and at an angle - spindle lock - cutting width with guide 540mm - cast iron table - dimensions (L/W/H) 1260x900x1000mm - weight 610kg Fpedpfezr I E Aex Aiven ADVANTAGES – Polish production – DTR documentation – used milling machine, very good condition Net price: 6900 PLN Net price: 1605 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), Precision CNC tool presetting and measuring device from renowned manufacturer KELCH – model Trabant 271-2/M. Equipped with a length and diameter measuring system featuring optics and a KELCH Pico LCD A23 monitor, as well as Heidenhain ND1202T Tool-Chek electronics. Very good condition, complete and fully operational unit. Technical specifications and features: • Manufacturer: KELCH GmbH + Co. Werkzeugmaschinenfabrik, Germany • Model: Trabant 271-2/M • Year of manufacture: 2000 • Measuring unit: KELCH Pico LCD (Version A23) • Display system: Heidenhain ND1202T Tool-Chek • Power supply: 230V / 50–60Hz / 1000 VA • Optical system with measuring camera and LCD screen • Rotary table with holders and two-axis adjustment system • X/Z axis measuring range: up to approx. 400 mm • Axis control from KELCH control panel (joystick + function keypad) • Digital readout, menu in German and English • Complete with original documentation and all connectors Condition: • Used, fully functional • Very clean example from a German toolmaking shop • All axes move smoothly, screen responds correctly • Ready for work Functional description: The KELCH Trabant 271-2/M is designed for fast and precise presetting of cutting tools prior to mounting in CNC machines. The optical system with Pico LCD display allows for measurement of tool length, diameter, and geometry in visual mode. Ideal for inspection and presetting of milling cutters, turning tools, drills, and special tools. Fjdexn Ax Ajpfx Aivepn

Condition: excellent (used), For sale: professional installation tool (SETTING TOOL) for KOENIG EXPANDER® components, manufactured by SFC KOENIG. Model: ExTool 040-2 Type: Setting Tool / Installation Tool Application: Installation and activation of KOENIG EXPANDER® components Manufactured in: Germany The device is designed for controlled setting (activation) of plugs, restrictors, and valves of KOENIG EXPANDER® into precision bores – without threading and without heat treatment. — Condition • Very good technical and visual condition • No cracks or damage • Working element is straight, clean, and unworn • Normal, minor signs of use • Complete set exactly as shown in the pictures — Fpedpsyc Ig Asfx Aiven Application • Installation of KOENIG EXPANDER® plugs • Automotive industry • Precision hydraulics • Hydraulic blocks, housings, machine components • Series production and maintenance — Set includes • KOENIG EXPANDER® ExTool 040-2 installation tool • Original carrying case • Working hose • Working container / reservoir • Manufacturer's manual • Accessories as shown in the photos

Condition: new, functionality: fully functional, empty load weight: 285 kg, maximum load weight: 1,215 kg, overall weight: 1,350 kg, axle configuration: 1 axle, loading space length: 2,550 mm, loading space width: 1,330 mm, loading space height: 430 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS MP 255 153 1500 1 + integrated aluminum loading ramps and folding front wall NEW VEHICLE Internal dimensions: 255cm x 153cm Side wall height incl. railing: 43cm Loading area height: 52cm Total weight: 1500Kg Payload: 1215Kg braked single-axle flatbed trailer overrun brake and handbrake from KNOTT 1500Kg axle with brake low chassis fully welded, hot-dip galvanized steel frame aluminum profile side walls Fpjdpfx Aez Hmdkoivsn pair of integrated aluminum loading ramps 1t/each steel railing front and rear side walls can be folded down and removed 15mm thick, non-slip, and robust screen-printed plywood floor bow jockey wheel 6 lashing points with 400Kg pulling force 14" reinforced C tires M+S tires net/rope hooks on the frame 13-pin connector marker lights at the front rear lights with reversing light and triangular reflectors OPTIONAL ACCESSORIES – PERMANENT PRICE REDUCTION STARTING FEBRUARY 2026 - Equipment for 100km/h (shock absorbers) - Spare wheel with holder - SARIS alloy wheels - Complete LED lighting - Anti-theft device - Fine or coarse mesh net - H-frame - Leaf guard at various heights, also closed - Flat cover with or without bow - High cover 150cm or 180cm - Rear supports further accessories on request! plus freight to Gera and vehicle registration document 150 € net Images are for illustrative purposes and may show optional accessories at an additional cost. Have you not yet found the right trailer? We have 50-100 vehicles permanently in stock and available for immediate pick-up. The workshop is open from 8:00 a.m. to 5:00 p.m. on weekdays for all types of repairs. Specialist in axle repair, also for caravans. Large selection of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website or come directly to us.

Condition: new, CATALOGUE NUMBER M0252 PRODUCT FEATURES Main machine features: - Single-head drilling machine for drilling in the range of 0 - 90° - Pneumatically adjustable head tilt angle - Side guides can be set with an accuracy of up to 0.1 mm - Securing clamps allow for quick panel positioning without adjustment - Spindles adapted for quick-release couplings - Patented pneumatic material clamping system - Work table made of MDF - Quick and precise adjustment - Precise drilling - Made in Italy Standard machine equipment: - 2 aluminum rulers with a length of 1.5 m (right and left) with four stops - 5 quick-release couplings - Wooden crate for protecting the machine during transport ADVANTAGES - Vertical/horizontal/angled drilling - Multi-spindle - New machine - CE certified - Robust - Professional TECHNICAL DATA - Number of spindles: 23 - Distance between the first and last drill: 704 mm - Distance between the centers of individual spindles: 32 mm - Maximum workpiece size: 950x3000 mm - Maximum workpiece thickness: 60 mm - Maximum drilling depth: 65 mm - Number of pneumatic clamps: 2 - Operating pressure: 6-7 bar - Air consumption: 10 l/cycle - Motor power: 1.5 kW - Noise level: 76.1 dB - Speed: 2800 rpm - Overall dimensions: 1235/950/1310 mm - Weight: 310 kg Net price: 19500 PLN Net price: 4640 EUR Fpodpozr I Hyofx Aivjn Net price calculated based on the exchange rate of 4.2 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: used, Year of construction: 2016, fuel type: electric, Lifting capacity: 272 kg Fpedpezqi Trofx Aivjn Please contact Gebrauchtgeräte Center for more information