Used Svedala Screening Machine Svedala 12/20-3 for sale (113,245)

Condition: used, SincoTec Type: Exciting Mot Resonance test bench POWER SWINGLY 20 kN The POWER SWINGLY BigTable resonance test bench is designed as a dual-mass vibrator. It consists of a vibration head, which is excited via an asynchronous motor with frequency control and an eccentric motor. The vibration head is located in the upper part of the machine and generates the dynamic amplitude. The vibration head is supported on the upper traverse via pre-tensioned coil springs and is guided centrally. The center load drive is located in the lower part of the machine and applies the static preload with the aid of a geared motor via a spindle drive. The test chamber is located above the mounting table and is bounded upwards by the adjustable traverse. The control of the test bench is carried out by the EXCITING MOT control system. The complete control electronics for the control system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated steel sheet and meets protection class IP 50 according to EN 60529. Technical data: General data of the test bench: Overall height of the test bench 1840 to 2240 mm Height of the machine table 1030 mm Width of the test bench 800 mm Depth of the test bench 1500 mm Height of the test chamber max. 600 mm (without force sensor) Free column passage 550 mm Maximum force amplitude 10000 N Maximum total force ±20000 N Maximum stroke ±5 mm Test frequency 30 to 110 Hz Accuracy of the measuring sensors min. class 1 (according to DIN EN 10002-3) Weight of the test bench approx. 1880 kg Max. weight of the clamping device 150 kg General data of the control cabinet: Overall height of the control cabinet 1900 mm Height of the table top 1080 mm Width of the control cabinet 650 mm Depth of the control cabinet 700 mm Iodjzii Awspfx Afuoih Weight of the control cabinet 152 kg Color RAI 9006 (white aluminum), table top Midnight Conditions for the installation site: Space requirement 2.5 x 2.5 m Required ceiling height 2.8 m Floor load-bearing capacity 170 N/cm² Voltage supply 400 V / 50 Hz (right-rotating field) Connection plug CEE socket, 5-pole, 16 A Fuse 16 A Connection and environmental conditions Mains conditions: Voltage 400 V three-phase with PE conductor and protective earth, right-rotating field Voltage fluctuations < ± 10% Short-time voltage dips < 20 ms Limits for permanent interference Radio interference level A according to VDE0871 Frequency 50 Hz ± 1% Protective earth Ground resistance < 0.3 Ω Model: POWER SWINGLY MOT Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, laser type: fiber laser, pipe diameter (max.): 9,000 mm, input voltage: 380 V, input frequency: 50 Hz, type of cooling: water, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, model: GS-HG Iiodpswwqvwjfx Afuoh Maximum length of pipe:

Condition: used, first registration: 10/2004, color: other, Year of construction: 2004, Empty weight: 3.800 kg Axle 1: left 8 mm right 8 mm Axle 2: left 6 mm right 6 mm Axle 3: left 8 mm right 8 mm We have the possibility to stack trailers! Iiodsu Sq Injpfx Afueh

Condition: new, Year of construction: 2022, messurements (LxWxH): 3660 x 1340 x 2500number of axes: 3pressure: 120 Tonnenweight approx.: 7000 kgoil filling: 200 Litermotor power: 11 Press Brake Control Unit : Esa S 630 Cnc 10 2d Graphical Screen - Touchscreen Control Unit Panel : Swivel Pendant Arm Hydraulic Press Brake Valve Option : With Ce Safety Signals Press Brake Safety Plc : Mcs Plc Safety Plc Press Brake Laser Safety System : Dsp-Ap Safety Block Laser Manual Height Adjustment) Press Brake Back Gauge : X Axis, 500 Mm Range, Including 2 Fingers, Manually Adjustable In Height And In Lateralposition. Press Brake Finger For Back Gauge : Standard Xf Arka Ve Yan Muhafazalar : Var (Ce'Li Model) Press Brake Top Tool Clamping : Manual European Type L:150 Mm (Promecam) Press Brake Top Tool : Eurostamp 1260 / Standard (835 Mm And 805 Mm Sectioned To 595 Mm And 210 Mm ) Press Brake Bottom Die Holder : Mechanical European Type Standard Width (Promecam) Press Brake Crowning : Cnc Adjustable Motorized Crowning (V-Axis) Press Brake Bottom Die : Eurostamp 2067 / Standard (835 Mm And 805 Mm Sectioned To 100 Mm Lh, 395mm, 210 Mm And 100 Mm Rh) Isdpfx Ashut Aaefujih Press Brake Front Support : Xf Ön Destek Press Brake Front Support Number : 2 Pcs Support, Manually Adjustable In Height And Inlateralposition. Electrical System : 380 V-660 V, 50-60 Hz, 3 Ph ( I E 3 ) Electric Cabinet Cooling System : Air Ventilation With Fan Number Of Foot Pedal : One Label Group : Label Group English Packaging Method : Plastic Cover With Strech Flim Shipment Method : Standard

Condition: new, functionality: fully functional, Year of construction: 2026, BPM-120 CRACK SEALING MACHINE TICAB LLC (Trade Industrial Company AB) — a leading manufacturer of road maintenance equipment in Europe — offers you a cost-effective solution for efficient local repair of asphalt concrete surfaces: the BPM-120 crack and joint sealing machine. Main Application: The BPM-120 fills cracks and joints on asphalt roads, parking lots, sidewalks, airfields, and other road infrastructure facilities. Designed for small- and medium-scale projects! BPM-120 Technical Specifications: • Bitumen emulsion tank: 120 liters • Bitumen pump: capacity up to 10 l/min, working pressure up to 5 bar • Feed system: manual spray wand + 2 m hose (non-heated) • Mixing: manual • Bitumen heating system: diesel burner • Temperature control: automatic (maintains preset temperature) • Purge system: allows cleaning of hose and spray wand after work is completed Thoughtful design for your comfort and safety! Iisdovrialspfx Afueh Advantages of the BPM-120 model: • Compact size and mobility • Easy to maintain and operate • Direct heating with diesel fuel (no oil layer) • Energy-efficient fuel consumption • High-quality crack and joint sealing ensures pavement durability • Simple construction guarantees reliability in operation Price: • €13,000 without trailer • €15,200 with trailer Delivery Terms: • Production time: up to 20 business days after order confirmation • Warranty: 12 months • Delivery: from the manufacturer’s warehouse • Support: manual, technical assistance, video instructions Contact us today for a personalized consultation! Choose equipment that delivers results — send your inquiry now!

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, travel distance X-axis: 6,000 mm, workpiece weight (max.): 1,000 kg, laser power: 20,000 W, pipe diameter (max.): 6,000 mm, Equipment: cooling unit, safety light barrier, Max. Length of Tube: 6m Iodpfxsv D T H Ts Afusih Cutting Capacity of Round Tube: Φ360mm Cutting Capacity of Square Tube: Φ360mm Max. Load: 1000kg Zero Waste Cutting Full stroke movement, capable of cutting both ends of the pipe, improving material utilization Full Pipe Cutting available Standard auxiliary loading and unloading system loading, unloading, and cutting of 6m full pipes available Bevel Cutting Function available Bevel angle adjustable from 0-45° Capable of V, X, Y, K type bevel cutting Optional Automatic Loading and Unloading Saves labor costs, and increases production efficiency Intelligent production for high efficiency

Year of construction: 2016, condition: as good as new (ex-display), Axial fan condenser, air ccoler Manufacturer: Güntner Iedpfjnbff Aox Afujih Model: GCVC RD 035.1/12-42-0007305P Year of c.: 2016 2 fans Volume: 4,6 l Comressed air: 32,5 bar

Year of construction: 2026, condition: new, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO ME Series mobile sand screening plant is an ideal solutions for the classifying materials which was provided as pre-crushed. Most important advantage of plant is having all equipment on only a single chassis. Transportation can be done by only one truck. TECHNICAL SPECIFICATIONS: - Hopper: 9 m3 - Plant Dimensions: 14130x4600x4160 mm - Production Capacity: 200-300 Tons Per Hour - Vibrating Screen and Deck: 2000x5000 (4 decks) - Total Motor Power: 65 Kw - Generator (optional): 100 kvA Iijdpfsz S I N Hox Afujh ME-2050 IS A COMBINATION OF: • Bunker (Hopper) • High Stroke Vibrating Screen • Folding type feeding and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: good (used), Year of construction: 2023, Dual-fuel burner, Weishaupt / monarch, WM - GL.20/3-A – used: Price ex works: €8,950 (net) incl. loading Manufacturer: Weishaupt / monarch Burner type: WM - GL.20/3-A Design: ZM-R-3LN multiflam® Factory number: 40709908 Year of manufacture: 2023 Cat. 112R3R Iijdpoz Sd Efofx Afujh Gas family: 2E/LL Gas: min. 275kW, max. 2,000kW Connection pressure: min. 15, max. 500 mbar Heating oil: min. 275kW, max. 2,000kW Heating oil EL PS 30 bar NOx class: N3 / EL3 Control voltage: 230V Supply voltage: 400V Electrical power: 5.22 kW Condition: good Available: immediately Location: Bünde, North Rhine-Westphalia

Condition: repair required (used), Year of construction: 2001, CNC-controlled wood lathe – processes 3 parts simultaneously. No controller included. Control cabinet without a computer; the attractive price without control should be taken into consideration. Technical specifications: Maximum working length: 1200 mm Maximum square section: 100 x 100 mm 3 parts processed simultaneously Programmable template Fagor control Ijdpfx Aef Ezgqofujih Designed for high productivity.

Year of construction: 2026, condition: new, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO MEY Series mobile sand screening and washing plant is an ideal solutions for the classifying and washing of materials which was provided as pre-crushed. Most important advantage of plant is having all equipment on only a single chassis. Transportation can be done by only one truck. Iiedpfx Aey Twqmjfush TECHNICAL SPECIFICATIONS: - Hopper: 8 m3 - Plant Dimensions: 13500x4500x3600 mm - Production Capacity: 120-200 Tons Per Hour - Screw Washer Size: 600x6000 mm Double Helix - Vibrating Screen and Deck: 1600x4500 (4 decks) - Total Motor Power: 68 Kw - Generator (optional): 130 kvA MEY-1645 IS A COMBINATION OF: • Bunker(Hopper) • Vibrating Screen with Washing Nozzles • Double Helix Screw Washer • Folding type feeding and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Year of construction: 2003, condition: used, fuel type: electric, Control, control part, interface, driving control, driving current control Iiedpfx Afeiy R U Neush -Manufacturer: Jungheinrich, drive control from picking truck type: ECE 20 -Type: AS 2412/3 -Mat no.: 50314365 / 50463845 software version 1.11 -Voltage: 24 V -Number: 1x control unit available -Price per piece -Dimensions: 250/190/H120 mm -Weight: 4.2 kg/pc.

Condition: ready for operation (used), * Brand: Derrick Corporation * Type: F36-126D-3DD * Surface: 3200 x 800 mm - 2 Decks Iedpfsywmzcox Afuoih * Driving: 1 vibration motor * On stock: 2 pieces

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 100 mm weight 537 kg SIEGMUND authorized dealer - all items available! Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Distance between holes in side wall 25 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Special set - including tool set of 16 3 Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 16 hole pattern / dimensions 2400 x 1200 x 100 mm - Plasma nitrided version with scale - including 6x base equipment - incl. 16 tool set 3: + 8x 160610.N clamp + 4x 160630.N clamp + 4x 160645.1.N prism + 24x 160510 bolts Iodpfx Afsxaalksueih + 4x 160410.N stop + 8x 160420.N stop + 8x 160108.N angle + 8x 160110.N angle + 2x 160162.N angle + 1x 160134 + 36.N bracket + 1x 163999 accessory set

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Electric pump, steel side rails, rear doors Equipment: - Electric pump - Rear doors - Double hydraulic system Net price: €10,668.07 / Gross price: €12,695.00 Iisdpfx Asz Ri D Njfuoh Item number: TI2335362020.01 Technical data: • Brand: Brian James • Model: Tipper 526 • Vehicle type: Rear tipper • Vehicle condition: New • First registration: Not yet registered • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 360 x 200 x 30 cm • External dimensions (LxWxH): 490 x 211 x 102 cm • Loading height of the floor: 71 cm • Permissible total weight: 3,500 kg • Unladen weight: 1,172 kg • Payload: 2,328 kg • Chassis: High loader (wheels under the body) • Tires: 195/60R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Steel side rails • Click & Clamp: The new "Click & Clamp" system. For maximum strength and quick addition and removal of various optional side rails and accessories. • Automatically adjustable stakes and lockable side rails ensure a comfortable ride without unwanted rattling. • Side rails with robustly installed latches • All side rails can be folded down and removed • Steel corner posts removable • Insertion option at all 4 corners for tarpaulin frames, grid attachments, side rail extensions or front wall extensions • Welded mesh hook under the loading area • Robust, rattle-free tensioning latches on the side rails • Galvanized steel sheet on a multi-layer floor panel • Reinforced, securely screwed V-drawbar • Very stable steel frame welded • Frame completely hot-dip galvanized • Numerous cross members, resulting in high point load capacity • Additional longitudinal struts continuously welded in • 8 lashing points recessed inside the floor (1000 DaN/kg), TÜV certified! Closed from below with spring plates • Rear doors at the rear, can be opened sideways, with hinge • U-profile at the rear for easier attachment of the ramps • Integrated ramp recesses for easy retrofitting of loading ramps • Chassis color: black • Side panel color: black • Double, solid 4-stage XL hydraulic cylinders • Electric hydraulic pump with battery (12V/90AH) • Detachable remote control for electric hydraulics • External battery charging socket for optional 230V charger • Battery trickle charge: The battery is charged when the engine is running via the vehicle's ignition (depending on the towing vehicle) • Battery charge level indicator • Battery disconnect switch • Support strut under the loading area for maintenance work • Rubber spring axles from ALKO • Automatic reversing function • ALKO overrun device and parking brake • Steel cast coupling head with integrated high-security lock ALKO • Toolbox mounted on the drawbar • Spare wheel in the rear of the trailer • 13-pin connector • Reversing light • Large-sized LED safety lighting • Complete LED lighting: Extremely bright, long-lasting and reliable. • Dynamic LED turn signals are also highly visible in bad weather • Integrated rear fog light • Various marker lights front, side and rear • Lighting recessed in the rear frame • Heavy-duty support wheel • 5-year chassis warranty

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Electric pump, steel side boards, hinged tailgate Equipment: - Electric pump - Hinged tailgate - Double hydraulics Net price: €10,550.42 / Gross price: €12,555.00 Article number: TI2335362010.01 Technical data: • Brand: Brian James • Model: Tipper 526 • Vehicle type: Rear tipper • Vehicle condition: New • Initial registration: Without initial registration • TÜV/MOT: 2 years from initial registration • Internal dimensions (L x W x H): 360 x 200 x 30 cm • External dimensions (L x W x H): 490 x 211 x 102 cm • Loading height of the floor: 71 cm • Permissible total weight: 3,500 kg • Unladen weight: 1,172 kg • Payload: 2,328 kg • Chassis: Low-loader (wheels under the body) • Tires: 195/60R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Steel side boards • Click & Clamp: The new "Click & Clamp" system. For maximum strength and quick addition and removal of various optional side boards and accessories. • Automatically adjustable stakes and clampable side boards ensure a comfortable ride without unwanted rattling. • Side boards with robustly integrated fasteners • All side boards can be folded down and removed • Steel corner posts can be removed • Attachment option at all 4 corners for tarpaulin frames, lattice attachments, side board attachments or front panel extension • Welded mesh hook under the loading area • Robust, rattle-free tensioning fasteners on the side boards • Galvanized steel sheet on a multiplex base plate • Reinforced, sturdily screwed V-drawbar • Very stable steel frame welded • Frame completely hot-dip galvanized • Many cross members, resulting in high point load capacity • Additional longitudinal struts continuously welded • 8 lashing points recessed in the floor (1000 DaN/kg), TÜV certified! Closed with spring plates at the bottom • Hinged rear tailgate on galvanized steel • U-profile on the rear for easier placement of the ramps • Integrated ramp compartments for easy retrofitting of ramps • Chassis color: black • Side panel color: black • Double solid 4-stage XL hydraulic cylinders • Electric hydraulic pump with battery (12V/90AH) • Removable remote control for electric hydraulics • External battery charging socket for optional 230V charger • Battery trickle charging: The battery is charged via the vehicle's ignition when the engine is running (depending on the towing vehicle) • Battery level indicator • Battery disconnect switch • Support for maintenance work under the loading area • Rubber spring axles from ALKO • Reverse driving automatic • ALKO overrunning device and parking brake • Steel casting coupling head with integrated high-security lock ALKO • Dust box mounted on the drawbar • Spare wheel in the rear of the trailer • 13-pin plug • Reversing light • Large-sized LED safety lighting • Complete LED lighting: Extremely bright, long-lasting and reliable. • Dynamic LED turn signals are also clearly visible in bad weather • Integrated rear fog lamp • Various marker lights at the front, side and rear • Lighting recessed in the rear frame • Heavy-duty support wheel • 5-year chassis warranty Iedoz Ri Eyjpfx Afueih

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Electric pump, steel sideboards, drop-down tailgate Equipment: - Electric pump - Drop-down tailgate - Double hydraulic system Net price: €11,264.71 / Gross price: €13,405.00 Article number: TI2335402010.01 Technical data: • Brand: Brian James • Model: Tipper 526 • Vehicle type: Rear-tipping trailer • Vehicle condition: New vehicle • First registration: Not yet registered • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 400 x 200 x 30 cm Iodpez Ri Hkofx Afuoih • External dimensions (L x W x H): 530 x 211 x 102 cm • Loading height of the floor: 71 cm • Permissible total weight: 3,500 kg • Unladen weight: 1,200 kg • Payload: 2,300 kg • Chassis: Low loader (wheels under the body) • Tires: 195/60R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Steel sideboards • Click & Clamp: The new "Click & Clamp" system. For maximum strength and quick addition and removal of various optional sideboards and accessories. • Automatically adjustable supports and clampable sideboards ensure a comfortable ride without unwanted rattling. • Sideboards with robustly installed latches • All sideboards are foldable and removable • Steel corner posts are removable • Attachment option at all 4 corners for tarpaulin frames, grid attachments, sideboard extensions, or front panel extension • Welded net hook under the loading area • Robust, rattle-free tension latches on the sideboards • Galvanized steel sheet on a multiplex baseplate • Reinforced, securely screwed V-drawbar • Very stable steel frame welded • Frame completely hot-dip galvanized • Many cross members, resulting in high point load capacity • Additional longitudinal struts continuously welded • 8 recessed tie-down points inside the floor (1000 DaN/kg), TÜV certified! Closed downwards with spring plates • Pivoting rear sideboard on hot-dip galvanized steel • U-profile on the rear, for easier attachment of ramps • Integrated ramp housings for easy retrofitting of ramps • Chassis color: black • Side panel color: black • Double, solid, 4-stage XL hydraulic cylinders • Electric hydraulic pump with battery (12V/90AH) • Detachable remote control for the electric hydraulic system • External battery charging socket for optional 230V charger • Battery trickle charging: The battery is charged via the vehicle ignition when the engine is running (depending on the towing vehicle) • Battery charge level indicator • Battery disconnect switch • Support strut under the loading area for maintenance work • Rubber spring axles from ALKO • Automatic reversing function • ALKO overrun device and parking brake • Coupling head made of cast steel with integrated high-security lock ALKO • Toolbox mounted on the drawbar • Spare wheel in the rear of the trailer • 13-pin connector • Reversing light • Large-dimensioned LED safety lighting • Complete LED lighting: Extremely bright, long-lasting and reliable. • Dynamic LED turn signals are also clearly visible in bad weather • Integrated rear fog light • Various marker lights front, side and rear • Lighting recessed in the rear frame • Heavy-duty support wheel • 5-year chassis warranty

Condition: used, axle configuration: 2 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, first registration: 01/1991, loading space length: 13,470 mm, loading space width: 2,450 mm, loading space height: 2,670 mm, total width: 2,500 mm, suspension: air, tire size: 385/65, tire condition: 30 %, wheelbase: 9,110 mm, color: other, Year of construction: 1991, = Additional options and accessories = - Air Suspension - BPW Axles - Drum brakes = More information = Axle configuration Tyre size: 385/65 Make axles: BPW Tyre profile: 30% Brakes: drum brakes Iiedpfoz Rxa Hsx Afush Suspension: air suspension Rear axle 1: Max. axle load: 10000 kg Rear axle 2: Max. axle load: 10000 kg Weights Empty weight: 7.100 kg Carrying capacity: 24.900 kg GVW: 32.000 kg Identification Registration number: OB-25-PK

Condition: used, Panel turning device used for loading and unloading panels. Working dimensions: * Maximum panel width: 1300 mm. * Maximum panel length: 3200 mm. * Rotation system: double cone. * Direction of rotation: from transverse to longitudinal Isdpfx Asrzhfpofujih This device is commonly used in the wood and furniture industry to facilitate the movement of panels during processing. If you have any further questions or need further details, please don't hesitate to ask!

Condition: new, maximum load weight: 37,495 kg, overall weight: 41,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website. Excerpt from the equipment. Complete equipment available upon request. Chassis A 100.121 Double T-longitudinal members welded to cross members, front construction height: approx. 147 mm (incl. fifth wheel plate) A 100.260 Chassis version 'Compact rear' A 100.026 Interchangeable 2 kingpins, 1 position: front overhang: approx. 570 mm A 100.164 Fixed rear impact protection, externally, in steel design A 100.390 Container supports as rectangular tubes, approx. 200 x 120 x 8 mm thick, reinforcements on the approach angle A 100.004 Rear underrun protection device according to EC Directive A 100.072 Lateral protection device according to EC Directive A 100.378 Lateral protection device approx. 460 mm high A 420.001 Quick-Lock complete equipment - Locks at every possible position - Locks are theft-proof A 038.001 Container locks for accommodating the following containers: 1 x 20' container, flush with the rear A 046.000 Length from kingpin to rear edge of vehicle: approx. 6,620 mm Support device B 028.001 Two mechanical support winches, 2 x 12 t, semi-circular with base plate, manufacturer: Jost B 001.000 Operation of the support winches on one side, on the right side Axles/Aggregate C 000.004 3 axles, each with a load-carrying capacity of 9,000 kg C 100.020 Wheelbase: approx. 1,410 / 1,310 mm C 075.600 KRONE axles with air suspension and disc brake, ET 120 C 143.028 Aggregate distance = approx. 4,625 mm C 075.950 Brake disc with approx. 430 mm diameter C 142.010 Load-dependent, fully automatic, electronic lift axle control for the 1st axle C 148.010 Manual function on the control panel for forced lifting (= driving assistance acc. to Directive 97/27/EC) and forced lowering via a rotary button C 148.030 Preparation of the lift/trailing axle(s) for operation from the towing vehicle (without installation in the towing vehicle), according to the selected connector(s) for light, for control via: *Contact 6 of the 7-pole auxiliary connector - ISO 3731 and/or *Contact 12 of the 15-pole connector - ISO 12098 and/or *Contact 8 A of the VBG connector C 043.110 With lifting and lowering device, incl. automatic ride height adjustment Tires (rims) D 400.000 6-fold, 385/65 R 22.5 - manufacturer according to manufacturer's choice D 185.100 Without spare wheel D 130.076 Profile: M+S (Mud + Snow) D 500.130 KRONE Smart Tyre Monitoring acc. to ECE R141 Determination of tire pressure and temperature D 500.121 KRONE TPMS control unit D 500.128 Without connect function in the TPMS control unit Iisdpfx Aoz Sh Idsfuoh Mudguards F 002.010 Plastic wheel cover F 010.001 Splash guard according to EC Directive Brake G 000.103 Braking system according to ECE Regulation 13 (incl. vehicle stabilization function) G 082.000 Spring brake parking brake G 102.010 Diagnosis via ISO7638 connector (EBS supply cable) G 079.002 Brake line connections below the top edge of the beam G 066.101 prepared for KRONE Telematics Dry G 040.000 2 chocks with holder G 071.000 Standard air connections ISO 1728 (Palm) G 064.000 Aluminum air tank G 088.550 Braking system: Wabco Premium G 088.500 Caution: The trailer may only be towed by tractor units which ensure the effectiveness of the ABS! G 085.100 EBS system, 2S/2M, 2 sensors on one axle Light H 000.001 Lighting and light signaling device acc. to UN ECE Reg. No. 48 H 070.005 2 outline lights with rubber arm, LED version H 071.011 LED side marker

Condition: new, Year of construction: 2026, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 100 t, stroke length: 200 mm, operating speed: 140 mm/s, reverse speed: 130 mm/s, table width: 60 mm, table length: 3,200 mm, table height: 850 mm, throat depth: 500 mm, ram plate width: 50 mm, ram plate length: 3,200 mm, distance table to ram: 460 mm, clearance between the columns: 2,700 mm, retraction force: 10 t, oil tank capacity: 230 l, total length: 3,800 mm, total width: 1,800 mm, total height: 2,750 mm, overall weight: 7,300 kg, Equipment: CE marking, documentation/manual, safety light barrier, This machine tool is designed and manufactured with the latest technology, ensuring its strength, rigidity and safety performance. It adopts an integral high-quality steel plate welded structure with a heavy-duty and high-rigidity frame. The machine surface is coated with imported anti-rust primer and topcoat, keeping the equipment in good condition permanently. The machine tool is mainly composed of the frame, upper slide, backgauge system, slide block and synchronous control device, dies, hydraulic system, control system and other components. Product detail display Iedoy Uc Nkepfx Afujih Frame Section It adopts a frame-type structure, consisting of worktable vertical plates, left and right side plates, and connecting beams. It is integrally welded with steel plates, featuring high rigidity, high strength and excellent resistance to torsional deformation. Internal stress is eliminated through processes such as surface shot blasting, ensuring long-term stability of the overall machine precision. During bending, the deformation of the upper slide and worktable is minimal, which guarantees excellent straightness and angular consistency of workpieces. Die and Clamping Device It is composed of upper and lower dies, featuring high precision, premium quality and long service life. The upper die is mounted on the slide block, securely fixed by a precision quick-release clamping device. The lower die adopts a dual-V concentric design, allowing for fast and convenient die changeover, effectively reducing operator labor intensity, and significantly improving overall production efficiency.device. The lower die adopts dual V concentric design, enabling fast and convenient die change, reducing intensity and improving efficiency. Throat Opening Deflection Compensation Device A linear encoder is installed on each side of the machine to measure and feed back the precise distance between the slide block and the lower worktable. The encoders are connected to the worktable via C-frames, effectively eliminating the influence of frame throat deformation on the slide block position. Position data is fed back to the CNC system, which outputs signals to control the hydraulic proportional servo valves, ensuring accurate synchronization of the two cylinders. Backgauge System Adopts the latest Belgian-designed backgauge for exceptional precision and stability. Driven by servo motors and ball screws, it delivers high speed and outstanding positioning accuracy. The unique dual linear guide rail structure ensures excellent long-term repeatability. Multi-stage positioning expands the working range, offering superior value for investment. Modular design allows axis configuration from single-axis X to multi-axis options. Mechanical Compensation Device Adopts an integrated mechanical compensation wedge block, motor-driven for precise adjustment. It automatically fine-tunes the worktable alignment, offsetting deflection caused by bending forces. The system ensures consistent precision along the entire length of the workpiece. It provides reliable, repeatable adjustment, eliminating the need for manual correction, and significantly improving bending accuracy.

Condition: ready for operation (used), functionality: fully functional, Sandiacre TG320-L Packaging Machine. Perfectly working, ready to use. Iodpfx Afoygqymeuoih

Condition: new, Type SX1325A-12 Useful working area axis X-Y-Z 2850-2100-150 mm Shaft, air cooled, 9.0kw 24000 rpm. Servo motor Control system LNC Drive gear High precision automatic positioning cylinder Work table vacuum plate Vacuum pump 7.5 kw Maximum speed 60 m/min Maximum working speed 15-20m/min Flexible towing cable (with screen) Air components BLCH Voltage 380V/50HZ Transport dimensions 3200x2100x1800mm Iiodpfsrxtvkjx Afush Weight 3100 kg The price is 24500 Eur

Condition: used, HUBER Water-cooled recirculating chiller Huber Unichiller 060Tw High-performance process chiller with Pilot ONE touchscreen control For sale is a used water-cooled recirculating chiller from Peter Huber Kältemaschinenbau. The unit is suitable for the precise temperature control and cooling of machines, technical equipment, laboratory applications, chemical processes, and industrial process circuits. Technical data: Manufacturer: Peter Huber Kältemaschinenbau GmbH Model: Unichiller 060Tw Type of unit: Water-cooled recirculating chiller Temperature range: -20 to +40 °C Cooling capacity: at +15 °C: 6.0 kW at 0 °C: 5.0 kW at -10 °C: 3.1 kW at -20 °C: 1.7 kW Temperature stability at -10 °C: 0.5 K Internal temperature sensor: Pt100 Connection for external sensor: Pt100 Safety class: I / NFL Protection class: IP20 Dimensions: approx. 600 × 600 × 1450 mm (W × D × H) Weight: approx. 213 kg net Mains connection: 460 V / 3 Ph / 60 Hz Max. power consumption: 10 A Fuse rating: 3 × 16 A Refrigerant: R507 Refrigerant quantity: 1.2 kg Max. pressure: 25 bar CFC and HCFC-free Circulation pump: Pump type: C3 Max. flow rate: 122 l/min Max. pump pressure: 5.6 bar Pump connection: G1 1/4 AG Cooling water: Cooling water connection: G1/2 AG Min. cooling water differential pressure: 1 bar Max. cooling water pressure: 6 bar Cooling water consumption at 15 °C cooling water: Supply +15 °C: approx. 330 l/h Supply 0 °C: approx. 230 l/h Supply -10 °C: approx. 152 l/h Supply -20 °C: approx. 70 l/h Min. filling volume: 5.9 l Expansion volume: 7.5 l Permissible ambient temperature: +5 to +40 °C Pilot ONE control: 5.7" color touchscreen Graphical temperature display Program generator / ramp functions Digital level indicator Multilingual menu navigation Interfaces: Ethernet USB Host / Device RS232 / Serial Pt100 connection for external temperature sensor Equipment: Water-cooled chiller C3 circulation pump Pilot ONE touchscreen controller 5.7" color display Digital level indicator Atmospheric open expansion tank Stainless steel housing Stainless steel circulation pump Copper-brazed evaporator Main switch RS232 interface USB interfaces Ethernet interface Pt100 connection Cooling water connections Process connections Castors Connection hoses as shown in the pictures Applications: Process cooling Machine cooling Iijdszui Uqjpfx Afuoh Laboratory applications Chemical processes Technical equipment Production equipment Cooling water supply Research and development Scope of supply: 1 × Huber Unichiller 060Tw recirculating chiller Connection hoses and accessories as shown in the pictures Condition: Used Unit can be switched on Pilot ONE touchscreen is functional and displays the operating menu Optical condition as shown in the pictures The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping by freight forwarder is possible. Subject to changes, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 12,000 W, sheet thickness steel (max.): 80 mm, sheet thickness brass (max.): 80 mm, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 1,550 mm, travel distance Y-axis: 3,050 mm, travel distance Z-axis: 290 mm, workpiece weight (max.): 1,400 kg, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, total length: 9,100 mm, total width: 3,120 mm, total height: 2,200 mm, warranty duration: 24 months, working range: 3,015 mm, Equipment: centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, All New Full Cover Fiber Laser Cutting Machine | GS-CE/ GS-CE PRO Series | 3000-60000W MACHINE AVAILABLE ON HAND The machine can be loaded into a container. This GS-CE series FULL COVER FIBER LASER CUTTING MACHINE offers maximum safety for metals cutting. Thanks to its full cover structure and protective glass observation window, you can observe the operation and avoid hazards such as laser radiation, sparks, etc. It also has a fast exchange table, and the exchange is within 10s. It will be your ideal solution for safe and efficient metal cutting! Working platform size: 3000mm*1500mm, 4000mm*1500mm, 6000mm*1500mm, 6000mm*2500mm; Ijdpfxjub Nwdj Afuoih Laser power 6KW-80KW CNC system: FSCUT Max. Acceleration：2.8G BOCI cutting head Intelligent anti-collision function Automatic lubrication Schneider relay Laser fault alarm Cooling fault alarm Laser protection glass Water cooler TÜV CE certificate Optional function: automatic loading and unloading system Control unit supports graphic formats: AI, BMP, Dst, Dwg, DXF, DXP External programming System complete incl. cooler, extraction system and safety light barriers Demonstration machine as good as new