Used Strand-Pelletizer for sale (418)

Condition: new, Year of construction: 2020, Transport dimensions (L x W x H): 0 x 0 x 0 ---- Basic version (2-4 strand operation) Bjdpfxszkzxgo Aa Ieln Hoisting unit with frequency inverter Radio remote control Complete support system for stationary operation Boom 40m Turntable extension Lighting transformer 4.7 kVA Slewing and trolley travel limit DKR 2.5m (=14 x ballast a? 2000 kg)

Condition: used, Electric chain hoist, electric lifting device, crane DEMAG type DKUN 1-100 K V1 F4 Serial no.: 61801900 Year of manufacture: 1997 Load capacity: 100 kg Hook travel: 3 meters Main lifting speed: 8 m/min Fine lifting speed: 2 m/min Chain size: 3.6 x 10.6 mm Pendant control cable length: approx. 1.8 meters Power supply: 400 volts, 50 Hz 1 load strand = 100 kg Net weight: 16.5 kg Bodpfx Aju Swb Uea Ijln Good condition

Condition: excellent (used), Year of construction: 2008, A KWB Powerfire TDS 150 is a premium Austrian, robust industrial biomass boiler designed for economical and reliable heating of larger buildings and facilities with continuous heat demand. Bedjzqnp Sjpfx Aa Ieln The boiler's output can be adjusted between 45 and 150 kW to match the current heat demand, allowing it to operate efficiently even at partial can be used with both wood chips and pellets, providing a high degree of flexibility in fuel selection. Fully automatic operation The high degree of automation of the KWB Powerfire significantly reduces the need for continuous handling. The moving grate burner system, the lambda probe combustion control, and the cyclone combustion chamber ensure efficient, uniform combustion even when using fuels of varying quality. Main advantages of the system: Automatic output control Lambda probe combustion control Automatic ignition Moving grate, self-cleaning burner system Automatic heat exchanger cleaning Automatic ash removal KWB Comfort control Robust, industrial design Low operation and maintenance requirement Can be operated with both wood chips and pellets Ideal application areas: Industrial and production halls Agricultural sites Horticultures and greenhouses Hotels and guesthouses Condominiums and larger residential buildings Schools, sports facilities, and public institutions Workshops and warehouses Smaller local district heating systems

Condition: new, Year of construction: 2024, functionality: fully functional, Wood thermal modification kiln fully equipped for thermo wood production, included: 15 m high AISI 316L isolated double wall chimney, inlet/outlet piping, pressure valves, gages, air compressor, full wood pellet heating unit, Siemens control panel, timber loading/unloading platform, 2 sets of timber spacers. Timber volume 7...8 m3, depends on bord dimensions and length; Inner chamber for timber length up to 7,5 m, total kiln length 10 m; Blsdovzub Hepfx Aa Ien Full thermal modification cycle time ~24 h from heating up to cooling down; Temperature can be set up to 230°C or more if needed; Required nominal grid power 25 A, can be used without grid with power generator; To produce 1 m3 thermally modified timber: 9...10 kWh + 55...60 kg wood pellets = 16...20 EUR without labor costs; Our wood thermo modification kilns can be made according to customers needed length from 3,6 to 9 m (from 3 to 9 m3 timber volume);

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, cutting width (max.): 450 mm, working length: 16,000 mm, working width: 450 mm, Equipment: safety light barrier, A well-maintained Hundegger K2 cutting machine with a planer is offered for sale. The machine is fully functional and has been serviced several times a year by Hundegger. The machine is still in operation until the beginning of November and can then be dismantled by the buyer. =Equipment: = Machine type K2-5-450 - Wood length, feed and discharge max. 16m - Color RAL 5012 blue - Feed cross conveyor, 6 strands, horizontal, 2.2 m with flat belt chains Bledpfx Aezb I Iwea Ijn - Extendable wood discharge - Undercarriage swivel miter saw - Universal milling cutter, 5-axis UFS (roller cutter, finger cutter, dovetail cutter) - Combination support for vertically operating tools (finger cutter, drilling unit 2.2kW) - Combination support for horizontally operating tools (drilling unit 2.2kW, drilling unit 2.2kW) - Marking device at the front - Discharge table, 6-arm - Beam turning station, hydraulic - Enhanced wood support surfaces (the vulnerable plastic coating has been replaced with maintenance-free stainless steel, chrome-plated tables, stainless steel rollers) - Extension roller conveyor, 10m with feed roller - Transfer cross conveyor, 7 strands, 3.5m with flat belt chain - Connection to planer HMD = Planer HMD - Fully automatic 4-sided planing and chamfering - Planer motors 7kW - Automatic thickness planer adjustment - Direct planer control - Planer machine directly integrated after the cutting machine = Other - Inspection possible by appointment. - If the machine is being dismantled, it can of course also be inspected in the operating environment. - A new K2 with a planer and comparable equipment costs approximately 800,000 euros. - New spare parts in stock can be included at a favorable price. - The machine runs perfectly, however, no guarantee or liability is assumed for future damages. - Ideal machine for medium to large carpentry or sawmill operations. = Contact - Friedrich Hirsch GmbH - Schwaig 2, 3351 Weistrach, Lower Austria - Managing Director and Owner: Friedrich Hirsch - If you have any questions, please call us from Monday to Friday from 7:00 a.m. to 12:00 p.m. and from 1:00 p.m. to 5:00 p.m. or send an email at any time. - Unfortunately, I cannot provide a mobile phone number, as the advertisement would otherwise be blocked.

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: AN-No.: 88.04.017 D, 8 very clean (reworked) Jakob Müller Frick AG looms NF42 from 1988, 1989 and 1990 from my stock. Machines run perfectly, 100% functional (refurbished) 12 shafts, without creel, with Mütrans, partly Müdata 1 piece NF 2/84mm from 1989 for 6.900€ AN-No.: 88.04.017 D with Müdata and Mütrans, 16 stocks 3 pieces NF 2/84mm overhauled from 1990 for 6.500€ each AN-No.: 90.01.704 B AN-No.: 90.01.755 A AN-No.: 90.01.229 A Bjdpfx Aaer Ix Igs Ieln 1 piece NF 2/84mm overhauled from 1989 for 6.500€ AN-No.: 89.00.118 D 3 pieces NF 2/84mm refurbished from 1988 for 6.500€ each AN-No.: 88.04.244 A AN-No.: 88.02.758 A AN-No.: 88.02.758 B The machines come from a curtain band production and were originally equipped with a Z compartment. They were converted to standard compartments as part of the general overhaul. Dogonl All tension trees and press rollers have been newly vulcanized by Westland. The card rollers in the chain case are also new or newly vulcanized. The central lubrication in the chain case has been optimized by us. All machines have the first shaft free (for heavier reeds) and have 12 shafts installed. All machines are equipped with Mütrans II. Individual machines with double belt take-off (heavy fabrics) can optionally be supplied. I think possible for 4-5 machines. It is also possible to equip it with finely knurled tension trees. I think it is also possible for 4-5 machines. All needle holders are suitable for double needles. For this purpose, two additional Mütrans II can be installed upon request. The machines have been rebuilt from scratch. All bearings, shafts and bushings have been checked and replaced if necessary. All swing arms have been checked and replaced if necessary. Installed are: 1st shaft free (spacer block installed) 2nd and 3rd shaft swingarm 201 4th - 6th shaft swing arm 202 7th - 9th shaft swing arm 203 10th - 12th shaft swing arm 204 13th shaft swing arm 205 All shaft springs have been checked and replaced if necessary. Nothing is porous, cracked or defective. The electrical installation has been checked, the circuit board for the thread monitoring has been checked and, if necessary, repaired or replaced. The machines are painted in RAL 6021 Müller pale green. All panels are clean and free of damage. The machines come without Müdata. 4 machines are also equipped with a crawler gear. The machines have been set up and tested. The machines come without oil, strands, slats, reeds, needles and chain links. Delivery on a Euro pallet, FOB Wuppertal

Condition: new, Year of construction: 2026, Automatical capsule filling machines SPT-Series (S. Korea) are design for fully automatic filling of hard gelantine capsules size #00 - #4, (optional # 000, 5) with powder, granulate or pellets for pharmaceutical and food supplements production. The equipment is distinguished by its high quality, simple operation. The disc method of filling provides high dosing accuracy. The machines are equiped with sets of tools for 1 capsule size from #00 to #000,5. The machines are conform to GMP standards and CE certificat; SPT-Series guarantee the highest quality of production! The capsule filling machine SPT-FS 50 for general scale production; According to GMP regulations; HMI system; Touch screen, PLC control system; 2 years warranty; Installation and service from Germany Bljdpfjf Hp U Ujx Aa Isn Number of capsule holder per segment - 6; Max.production quantityof capsules - 50000 psc/h; Capsule size #00,1,2,3,4 (optional #000,5) Weight of machine - 1470 kg; Space consumption - 1.200 x 1.470 x 1.850 mm

Condition: new, PROTON P-V LINE  PROTON equipment offers the right solution to recovering and conveying of blast medias, powders, plastic pellets, grains, sands, aggregates and other bulk metarials in both cleanup and material transfer functions. The main type of industry using our equipments are blast cleaning companies, shipyards, tank cleaning companies, metallurgical plants and steel mills, foundries, power plants, cement industries, chemical industries etc..   The dust in the air is collected by a Vacuum Cleaner and the grit in the Stock Silo by its separator. Especially in inaccessable or enclosed areas such as storage tanks, box girder constructions, tank internals at shipyards etc., the equipment offers great savings in time and manpower.  A PROTON Vacuum system cuts costs by reducing cleanup time and reclaiming valuable materials.  This versatile vacuum system can be used to pick up any material that will flow through a hose.  With its long reach and powerful suction, PROTON cleans out tanks, pipes. There are 2 types of stock silos, Cylindrical and Square, having 2 floors. Technical Specifications for standard machines: Bodjghbkyopfx Aa Ieln VC Unit’s cost-cutting power has been proven hundreds of times. In fact, most VC units pay for themselves in less than 3 months through reduced labour costs and reclaimed materials. Units are available with capacities up to twelve tons per hour, conveying distances up to 330’’(100m),and motors with 7,5 kW-90 kW (3,98m³/min-72m³/min). Performance data for air (p₁=1,0 bar, t₁=20 °C, ρ=1,2 kg/m³) The heart of the PROTON VC is a very robust AERZEN blower made in GERMANY. All sets include the following equipment: - Suction Hose (rubber-wired) - Suction Hose for connection between Vacuum Unit and Hopper - Suction Nozzle - Cam-lock and clamp Connections - Cartridge Filter (spare) - Oil for Blower (spare) - Manometer (spare) - Phase Protection Relay - all necessary fasteners

Condition: new, Year of construction: 2024, operating hours: 10 h, functionality: fully functional, machine/vehicle number: WFB2500x2400, conveyor belt length: 4,900 mm, conveyor belt width: 290 mm, conveyor belt speed: 400 mm/s, total length: 4,200 mm, total width: 540 mm, total height: 2,000 mm, overall weight: 250 kg, discharge height: 2,000 mm, power: 0.55 kW (0.75 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, motor manufacturer: GEMOTEG, Equipment: type plate available, Complete solution for conveying bulk material such as wood chips, wood pellets, shredded material, granulate, etc. Aluminum angled conveyor belt incl. substructure Horizontal area 2,500mm Rising area 2,400mm Angle in bend 45° Feed height: 300mm Discharge height 2,000mm Total conveyor belt length measured on the floor: 4,200mm Bledpfxerwi D Es Aa Ien Conveyor belt width 500mm PVC conveyor belt incl. cleats and corrugated edge Drive: Motor 0.55KW Speed approx. 0.3-0.5m/sec Connection 400/240V, 50Hz Protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Shaft edge: 50x35mm 25 pcs. T-40 cleats - 396mm pitch 2-ply especially transversely stable Useful width: 290mm, results as follows: Queranordnung 70+35+290+35+70mm ONLY WHILE STOCKS LAST!!! All our prices are net prices plus VAT. - can also be viewed under power after consultation!

Year of construction: 2022, condition: new, Complete solution for transporting bulk goods such as wood chips, wood pellets, shredded goods, granulate, etc. Aluminum angled conveyor incl. substructure horizontal range 2,500mm (adjustable) Rising range 4,000mm (customizable) Angle in the bend freely adjustable Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable ( to move) Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, ​​felt or rubber. PU conveyor belt including cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Wavy edge: 50x30mm T-40 lugs - 300mm pitch 2-layer particularly laterally stable We always have various systems of this type in stock. The delivery time for an individual system is currently around 2-3 weeks, depending on the manufacturing effort. Blodpfxoilg U Ej Aa Ion Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator

Condition: as good as new (ex-display), Year of construction: 2025, Complete solution for transporting bulk goods such as shredded goods, wood chips, wood pellets, granulate, etc. Aluminum angled conveyor incl. substructure horizontal range 2,500mm (adjustable) Rising range 5,000mm (customizable) Angle in the bend 35,40 or 45° Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable ( to move) Conveyor belt width 500mm (customizable) Bledpfei Igdfex Aa Ien We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt including cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Wavy edge: 50x25mm T-50 lugs - 400mm pitch 2-layer particularly laterally stable Fixed overbelt magnetic separator: Permanent overbelt magnetic separator TYPE PM1200 Manufacturer: magnetprofis GmbH & Co. KG L x W x H: 1200 x 550 x 200mm Magnetic L: 700mm W: 250mm Gear motor: 0.37KW We always have various systems of this type in stock. The delivery time for an individual system is currently around 2-3 weeks, depending on the manufacturing effort. Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator

Condition: new, Year of construction: 2026, Availability upon request. Very robust machine with high pressing force. - Also suitable for producing marketable briquette quality, depending on the material. The large-sized press cylinder and the 70 mm briquette size make this possible. Our best-selling briquetting press series: + Proven, simple technology for extremely low failure rates. + 25 years of experience, continuous development, and know-how. + Several thousand machines in operation with satisfied customers. + Excellent price-performance ratio. Additional cost for demonstration cooling unit: €4,980 net. (can also be retrofitted later) * cools the press tongs (important after 4 hours) and the hydraulic oil. * Cooling unit recommended for regular operation of more than 4 hours at a time. Commodity code: 84793010, Briquette diameter: 70 mm, Front bushing: 125 mm, Briquette stroke max.: 100 mm, Briquette stroke opt.: 80 mm, Capacity (material-dependent): up to 150 kg/h* * depending on the bulk density, * based on a bulk density of 200 kg per cubic meter. Motor power: 9.2 kW, 400 Volts / 50 Hz / 3-phase, Length: 2095 mm, Width: 1300 mm, * with large chamber 1600 mm Height: 1700 mm, Blsdpsd Nm Sisfx Aa Ion Weight: 1250 kg, Oil volume: 220 liters, Silo diameter: 1200 mm Silo capacity: approx. 1 cubic meter Pump: 75 liters Hydraulic pre-compressor Optional cooling for press tongs: yes, with special accessory - coolable press tongs Optional cooling for hydraulic oil: yes Cooling of the press tongs and hydraulic oil with a cooling unit (special accessory) Optional level monitoring: yes Optional strand briquette: yes (material-dependent) Optional enlarged feed slide: yes, with special accessory - enlarged feed slide CE compliant Requirements for the raw material: - The moisture content (oven-dry basis) must be between a minimum of 6% and a maximum of 18%. - Chip length max. 20 mm - Installation temperature: temperature-controlled room with a minimum of +5°C - The feed material must be free of metals and mineral contaminants such as sand, stones, etc. Damage to the press tools and/or increased wear may result.

Condition: new, Year of construction: 2026, Automatical capsule filling machines SPT-FL25 Series (S. Korea) are design for fully automatic filling of hard gelantine capsules size #00 - #4, (optional # 000, 5) with powder, granulate or pellets for pharmaceutical and food supplements production. The equipment is distinguished by its high quality, simple operation. The disc method of filling provides high dosing accuracy. The machines are equiped with sets of tools for 1 capsule size from #00 to 5 (optional #000,5). The machines are conform to GMP standards and CE certificat; SPT-Series guarantee the highest quality of production! The small capsule filling machine SPT-FL25 for R&D and small general scale production; According to GMP regulations; HMI system; Bsdpsdy Dyfofx Aa Ijln Touch screen, PLC control system; 2 years warranty; Installation and service from Germany Number of capsule holder per segment - 3 psc/h; Max.production quantity of capsules - 25 000 psc/h (by 1 segment hole); 17 000 psc/h (by 2 segments hole), 8 500 psc/h (by 1 segment hole). Weight of machine -700 kg; Space consumption - 900 x 1100 x 1700 mm

Year of construction: 1999, operating hours: 47,973 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 20472666, Complete compounding and granulation system based on a co-rotating twin-screw extruder, Krupp Werner & Pfleiderer ZSK 50, manufactured in 1999. The system is suitable for compounding, processing, and regranulating thermoplastic materials. Previous process: ABS recycling The system consists of: Twin-screw extruder ZSK 50 Mc 900 with a process length of 36 L/D Drive power: 181 kW Screw speed: up to 1200 rpm including water ring vacuum pump and water cooling including Autotherm temperature control unit including strand die head Multi-component dosing and material feeding system from Colortronic - Graviblend (manufactured in 1999), gravimetric, with 5 gravimetric feeders, including vacuum material conveying with Busch vacuum pump, type RC 0160, suction via suction lances Downstream: Ettlinger melt filter, type ERF 200 with 1250 cm² filter area for up to 900 kg/h Water bath, 4.0 m, including heat exchanger Granulate air blower Scheer strand granulator SGS 200-E5, manufactured in 2011 Classification vibration screen Cooling screw conveyor Control cabinets included. The system is currently still assembled and can be inspected under power until the end of September. Bsdpfx Aaszn Um Eo Ijln

Condition: used, Year of construction: 1958, For sale: an industrial filling and dispensing machine from Gebrüder Höller Maschinenfabrik, Type MB, designed for dispensing and packaging granular and pelletized products. Key information: Manufacturer: Gebrüder Höller Maschinenfabrik Model/Type: MB Application: granular/pelletized products The machine features a robust, mechanical industrial design and is equipped with a large hopper with a mixing system, as well as an extensive dispensing and packaging mechanism. Blodpjzumk Aefx Aa Isn Equipment visible on the machine: large hopper/feed bin, mixer in the hopper, mechanical dispensing system, product feeding system, mechanical packaging system, electric main drive, gears and mechanical drive transmission system, control panel, adjustable working elements, heavy-duty, stable industrial construction. After appropriate adjustment and adaptation to the specific product and packaging type, the machine can be used to package various types of bulk, granular, and pelletized products. Condition: Used machine, in the condition shown in the current photos. Visible signs of use, scratches on the paint coating, and localized corrosion marks typical of long-term operation of an industrial machine. The machine is complete as shown in the photographs. It is currently placed on a pallet and prepared for transport. Options: personal inspection of the machine, obtaining additional information, arranging loading and collection terms. Sales conditions: Selling price: 15,000 EUR Machine available immediately. We invite companies interested in purchasing an industrial filling and dispensing machine to contact us.

Year of construction: 2020, condition: excellent (used), functionality: fully functional, Graco Tank-Free Hotmelt Delivery System Invisipac HM 25 Year 2020 For delivering and dispensing hot melt adhesive pellets. For professional use only. 1200 psi (8.3 MPa, 83 bar) Maximum Working Pressure 400°F (204°C) Maximum Fluid Operating Temperature 100 psi (0.7 MPa, 7 bar) Maximum Air Inlet Pressure Bljdpewigbmofx Aa Isn Proven adhesive savings, unsurpassed reliability. Unlike conventional tanks and many "tankless" systems, the InvisiPac system's patented Melt-on-Demand technology ensures a constant flow of adhesive that melts quickly and is dispensed instantly. You save adhesive and costs due to unplanned downtime for maintenance. With the InvisiPac system's robust reporting capabilities, you have the data you need to make smart decisions for your line that can increase efficiency, reduce costs, minimize downtime, and improve productivity. Better performance: No clogged nozzles; No carbon-filled containers; Fast startup in as little as 10 minutes; Improved operator safety; High performance with a sustainable component; Greater cost savings; Consistent adhesive viscosity; No material damage; Little to no waste; Better dispensing control; Use the adhesive of your choice

Condition: refurbished (used), functionality: fully functional, year of last overhaul: 2025, 1) Log Yard with 10 Boxes (Drop Boxes) – New and Used Log Feed and Sorting Line New Feed rate 50 m/min. as well as the following used components: Comprising: New cross feed conveyor, step feeder Used log transfer carriage, Used log transfer carriage with ejector, Used Cambio 50 debarker, Used split detection unit with belt, Measuring section, sorting log carriage. Including debarking; Inspection and Painting; including log infeed. Without boxes, sheet metal cladding, measuring system, discharge control, or control cabinet. Root reduction. 2) Log Infeed for Canter Line Heavy-duty cross log conveyor NEW Cross log conveyor in 4-strand execution Axle spacing: 7.5 m Total length: 8.0 m Drive shaft: 100 mm diameter Chain: Bush conveyor chain, pitch 100 mm – heaviest version Fixed rear stops, without sheet metal cladding Steel substructure: HEB 200 Construction height: 1000 mm Drive: geared motor 7.5 kW 3) Equalizer NEW Number of chains: 4 Axle spacing [mm]: 3500 Blsdpoykr Aqofx Aa Ien Overall width [mm]: 5730 Paddle spacing [mm]: 1000 Drive shaft diameter [mm]: 100 Drive SEW [kW]: 7.5 Speed [m/min]: 10 Design: completely sheet metal covered between chain runs 4) Step Feeder NEW Feed steps: 4 Overall width [mm]: 4200 Plate thicknesses [mm]: moving steps 12 mm, fixed steps 20 mm Drive SEW [kW]: 18.5 Drive via crank mechanism and geared motor 5) Canter Line (WD brand) Log transfer carriage before RB 2 infeed Length extension to 18.5 m – drive and deflection RB 2 infeed with powered steel chain bed, designed for lateral log infeed. Conveyor chain with carrier dogs, frame in welded construction. Intake and centering unit ZE with log rotation unit TDV and centering device. Feeding unit ZE Log length: 2.5 – 5 m Clear width: min. 80 mm Clear width max.: 780 mm Construction height: 1000 mm Weight: 5400 kg Profile canter FZ 3 Machine frame with base frame 2 knife head housings with main shaft bearing, 2 knife heads with finishing segments, Drive power 90 kW Log diameter: min. 100 mm, max. 400 mm Chipping height above the chain max. 515 mm Distance between disks max. 570 mm Distance between disks min. 60 mm Disk diameter: 1260 mm Positioning via electric motors 2 hydraulic units 35 kW hydraulic pre- and post-cut Pre-cut square timber turning device Electrically powered roller conveyor TR 800 Centering and feeding unit ZE with FZ 3 canter

Condition: like new (used), Year of construction: 2017, S&F Oscillating Screen | Screening Machine Type ASM-200 used (inspected) with inspected bearings (flange bearings) and inspected universal joints Manufacturer: S&F GmbH Type: ASM-200 Year of manufacture: 2017 Screening capacity: approx. 20 t/h (for wood pellets, depending on material) Fractions: 2 Screening area: 2.0 m² per screen mesh size Screening decks: 1 piece Mesh size of the screen: - 1. screening deck: punched perforated plate screen, D = 5 mm Drive power: 2.2 kW, 3 x 400 V, 50 Hz L x W x H: 3,200 x 1,800 x 1,450 mm Model: ECO Line Machine weight: approx. 1,300 kg Machine colour: RAL 3000 Flame Red Bedsy Aa Ugspfx Aa Isln incl. 1 piece Modular silo type M-300 / 45°, used L x W = 3,000 x 3,000 mm Total height: approx. 4,400 mm Outlet height: approx. 1,750 mm Volume: approx. 4.06 or 9.35 m³ Max. bulk density: approx. 900 kg/m³ Item no.: 406.4345 Incl. extension feet L = 1,100 mm Incl. hopper attachment and slide gate Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - Wood pellets - charcoal - Waste wood - Bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Screening machine for wood chips

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, power: 750 kW (1,019.72 HP), Drying Technology Title: Multi-material Dryer + Boiler Condition: Used – Very good condition Description: For sale: multi-material dryer Brand: Gerdes System with perforated moving floor Moving floor driven by electro-hydraulic power unit 3 levels 2 fans per level (6 fans in total) Control cabinet with high-performance PLC Temperature sensors for each level Blockage detector Bsdpfsyyddgex Aa Isln LASCO wood chip boiler 750 kW Fully automatic Remote monitoring Ash screw conveyor and automatic ash removal Fire protection flap Complete package sold with various accessories (screws, conveyors, etc.) - Hydraulic power unit - Material receiving bin - Belt conveyor - Rotary screen - Auger elevator for feeding the dryer - Reclaim auger under the dryer - Trough screw conveyor - Filling chamber and wood chip storage tank for the boiler - Chip receiving bin and screw conveyor - 2 control cabinets - Various spare parts (pipes, clamps, electric motors, filters, cyclone, etc.) To be seen on site. Excellent working condition. Also for sale: KAHL pellet press, complete installation with bagging system. More information on request.

Condition: new, Year of construction: 2026, CORMAK DI325 – Compact Dry Ice Cleaning Machine The CORMAK DI325 is a compact and modern dry ice cleaning machine designed for effective removal of dirt from machinery, molds, tools, production components, and technical surfaces. It is an ideal solution for companies looking for an efficient, clean, and safe cleaning method without the use of chemicals, water, or abrasive materials. The main advantage of the DI325 is its compact design and high mobility, which clearly distinguish it from many larger and less convenient machines available on the market. This makes the machine suitable not only for production facilities, but also for servicing, maintenance, field work, and any application where convenient transportation and quick setup are important. The machine uses dry ice pellets with a diameter of 3.0–8.0 mm and allows precise adjustment of operating parameters to suit the type of surface being cleaned and the level of contamination. Adjustable operating pressure and dry ice feed rate enable effective cleaning of both delicate components and more demanding industrial surfaces. Key Advantages Compact design for easy transportation and use in different locations, high mobility and convenient operation, effective cleaning without chemicals or water, non-abrasive cleaning that does not damage the treated surface, Bledpfszwfuljx Aa Ion adjustable operating pressure, adjustable dry ice feed rate, quick setup and preparation for operation, ideal for industrial, service, and technical applications. Applications The CORMAK DI325 is suitable for applications including: cleaning machinery and production equipment, removing dirt from molds, tools, and components, cleaning metal and technical components, service and maintenance work, cleaning surfaces without the need to dismantle multiple components, removing deposits, grease, process contamination, and production residues. Included Equipment You receive a brand-new CORMAK DI325 dry ice cleaning machine, ready for operation with dry ice pellets, equipped with: CORMAK DI325 machine, a set of nozzles in various shapes and sizes, accessories required for operation according to the selected configuration. Different nozzle shapes and sizes allow the working stream to be adapted to the type of component being cleaned and the specific working environment, increasing the machine's versatility in everyday use. Technical Specifications Technical specification Value Power < 550 W Power supply 230 V AC, 50 Hz Air consumption 0.8–3.0 m³/min Pneumatic supply pressure 0.4–1.0 MPa (4–10 bar, adjustable) Dry ice feed rate 0–0.75 kg/min (adjustable) Dry ice hopper capacity 5 kg Weight 55 kg Dry ice pellet size 3.0–8.0 mm Drive system Direct drive Machine dimensions (L × W × H) 580 × 420 × 650 mm

Condition: used, Electric chain hoist, electric lifting unit, DEMAG crane, type DKES 2-200 K V2 DI with Dematik BUS control via crane control system Factory No. 61456646, Year of manufacture 2003 Load capacity: 200 kg Hook travel: 4.0 meters Main lifting speed: 14.0 / 19.2 m/min Fine lifting speed: 0.20 m/min Chain size: 4.2 x 12.2 mm 1 load strand = 200 kg - with DKES2/5 500V control logic - without crane operating control Bsdpegd Ipnjfx Aa Ieln - Dematik BUS control via crane control system - without trolley Mains connection: 400 volts, 50 Hz Rated power: 750 W Rated current: 2.4 A in good condition

Condition: used, Electric chain hoist, electric lifting mechanism, GIS crane type 150 / F Manufacturer's serial number: 1502802 Year of manufacture: 1981 Load capacity: 1500 kg Hook travel: 4 meters Main lifting speed: 4 m/min Fine lifting speed: 1 m/min - Electric trolley with a speed suitable for double T-beams - 2 load strands Good condition. Bodpjgi E Evjfx Aa Ioln

Condition: used, Electric chain hoist, electric lifting unit, crane STAHL type T510-8 / 2.0 2/1 Manufacturer's serial number: 1524132, year of manufacture: 1997 Lifting capacity: 2000 kg Hook travel: 4 meters Main lifting speed: 4 m/min Fine lifting speed: 1 m/min Load strands: 2 Control pendant cable length: approx. 0.9 meters Rated power: 1.6 kW / 0.36 kW Rated current: 4.3 A / 2.5 A Mains connection: 400 volts, 50 Hz - Suspension eyelet on the top of the crane - Emergency stop Blsdpokwh H Asfx Aa Ion Weight: 75 kg Good condition

Condition: used, E-chain hoist, electric hoist, crane DEMAG type DK5-500-K-V1F4 Factory no.: 63207040 Year of manufacture: 1993 Load capacity 1000 kg Hook path 2.6 meters Distance from suspension to load hook 450 mm Main lifting speed 4 m/min. Fine lifting speed 1 m/min. Cable length of control box approx. 1.7 meters Mains connection 400 volts, 50 Hz. 2 load strands = 1000 kg - Emergency stop Weight 46 kg Blsdjv Daqrjpfx Aa Isn good condition

Condition: used, Electric chain hoist, electric lifting unit, crane DEMAG Type PKVUN1 V1 Serial No. 63409464 Year of manufacture: 1993 Rated load: 250 kg Bljdpeyv H Efefx Aa Ion Hook travel: 5 meters Distance from suspension to load hook: 400 mm Main lifting speed: 4 m/min Precision lifting speed: 1 m/min Pendant control cable length: approx. 1.7 meters 2 load strands = 250 kg - Emergency stop Power supply: 380 Volt, 50 Hz Weight: 20 kg Good condition