Used Straightening Press With Straightening Unit For Shafts for sale (48,796)

Condition: used, Machine not operational - control system not functioning Available at a special price Double-column hydraulic press ALPHA TEC -- ALPHATEC Type RPS 5000 Factory No. 300487, Year of Manufacture 2006 Pressing force: 500 tons Distance between columns (front and rear): 2520 mm Table area: 2500 x 2500 mm Ram area: 2500 x 2500 mm Ram stroke: 600 mm Maximum installation height: 600 mm Table height above floor: approx. 900 mm Tank capacity: approx. 1000 liters Ram retraction force: approx. 22 tons Adjustable forward speed: 100-800 mm/s Bedpfsdzqptox Ad Iswu Pressure build-up to 5000 kN: approx. 0.7 sec. Return stroke speed: approx. 300 mm/s Main motor power: 75 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - 8-fold flat guide for the ram - Hydraulic ram locking in the top dead center position - Adjacent control cabinet (200 x 50 cm) - Electrical control system SIEMENS PLC S7-314 - Operation via SIEMENS OP 170-B (5.7") - 2-hand control panel located beside the machine - Floor-level installation - Table top 2510 x 2530 x 135 mm (approx. 6700 kg) - Central lubrication system - Operating manual with circuit diagrams Space requirement (L x W x H): 372 x 260 x 460 cm Space requirement for horizontal transport (L x W x H): 460 x 372 x 260 cm Weight: approx. 50 tons The machine was used for straightening heated steel flanges. From insolvency – in good condition.

Condition: good (used), Year of construction: 1980, Straightening force: 100 t Thrust: 325 mm Table size: 490 x 3500 mm Max. stroke: 160 mm Pillar speed up: 206 mm/s Pillar speed down: 68 mm/s Hydraulic drive: 380 V, 15 kW Space required: 3500 x 1650 x 2760 mm Weight: 5500 kg Bodsvgcpcspfx Ad Iewu

Condition: new, For sale, a pipe straightener from the German manufacturer SMS MEER, the machine is brand new, it was dismantled from a plant that collapsed during the delivery and assembly of the machine. The machine has two Siemens 200 kW drive motors each. Straightening rollers have a length of 460mm, diameter on the sides 400mm, diameter in the middle 300mm. The weight of the machine itself is 44 tons, the total weight is 55 tons. I can send a lot of photos before dismentling. Bsdpfxem H Unhj Ad Iswu

Year of construction: 2018, condition: used, Compressor system Manufacturer: Atlas Copco Type: GA15VSD+FF Bwodpfozu Al Ajx Ad Iou Year of manufacture: 2018 Technical data Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: used, We have two compressor Jun-Air Model 6 mobile units available. Specs you can see on the pictures Bjdpfx Ajzwk S Ajd Ijwu

Condition: used, Year of construction: 1990, pressure 3 t throat 0 mm stroke 200 mm Bodpfst Hw Amjx Ad Iewu total power requirement 15 kW weight of the machine ca. 4 t dimensions of the machine ca. m Fully Automatically Straightening Press, 3 Stations,parts turning, (bolts)

Condition: good (used), TABLE PRESS WITH POWER UNIT Bwedpfx Adok Adfns Iou

Condition: used, Year of construction: 2006, Milling spindle unit SEMA SE 100, e.g. for the production of crankshafts Spindle mounting: flange Speed with this gearbox: 97 rpm Spindle designed for up to 3000 rpm Drive power, currently: 22 kW The milling spindle is designed for up to 25 kW Bearing diameter: 110 mm Disc cutter SANDVIK Ø 700 x 25 mm Plunge depth of the disc cutter: 235 mm Accessories / Special features: - Disc cutter SANDVIK Ø 700 x 25 mm - Lubricated-for-life spindle bearings - Robust construction with hardened and ground spindle - High precision - 2-fold bearing of the spindle with 5 spindle bearings - WZ clamping via flange Bwodpfjddzi Aox Ad Iju Original new price at the time: approx. €34,500.00 net Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: good (used), Bitzer compressor unit Bedpfsg Rcfvjx Ad Iowu Type: HSK 7471-90 (x3) Volume: 250 m3 / h (x3) Cooling capacity: 435 kW at -10 ° C / 40 ° C, 280 kW at -20 ° C / 40 ° C Refrigerant: R404A Dimensions: 3600 x 1350 x 2600 mm Pieces in stock: 1 Stock number: Z9 Condition: Used We have many other refrigeration devices. Chillers, compressors, coolers, condensers, chillers, cold rooms, refrigeration and gastronomic furniture as well as machines and devices for restaurants and meat processing. See our other auctions or call us, not everything is machineseeker.

Condition: new, AUTOMATIC DOUBLE SPEED MOTORIZED HYDRAULIC PRESS WITH RAPID POWER 20 TON Max capacity TON 20 Bodorvz A Sopfx Ad Iswu Approach speed (in rapid) mm/min 1700 Working speed (in slow) mm/min 440 Cylinder rod stroke mm 300 Cylinder rod diameter mm 45 Shank diameter mm M14 Tank capacity liters 30 Max pressure bar 350 Voltage V 400 Frequency Hz 50-60 Motor Power kW 1.5 Max absorbed current A 3.8 Weight Kg 200

Condition: new, Year of construction: 2024, 110-ton electro-hydraulic press Made in Italy The P110 MR is equipped with: Immersed motor power unit, 400 V, 50-60 Hz. Rapid approach and return pump, calibrated to 20 bar. Adjustable pressure pump with handwheel for achieving the required power. Maximum pressure valve with mechanical lock to prevent overpressure. Manometer (standard) that allows for extremely precise calibration of the delivered power. The P110 MR is the only hydraulic press composed of 2 columns in a monolithic structure made of FE 510 steel, laser-cut without welding in the areas of greatest stress. This feature gives it exceptional robustness. It is non-deformable and guarantees tight working tolerances. The P110 MR is equipped with a 30-liter tank and has a rapid descent speed of 1,400 mm/min. Weight: 1,100 kg Maximum pressure: 350 bar Maximum capacity: 110 tons Rapid flow rate: 34 l/min Bsdpfsfh R N Dex Ad Iowu Slow flow rate: 5 l/min Inner width between columns: 1004 mm Rapid stroke advance: 1,400 mm/min Slow stroke advance: 130 mm/min Voltage: 400 V Frequency: 50-60 Hz Power: 3 kW Maximum absorbed current: 7.3 A Cylinder stroke: 300 mm Cylinder diameter: 200 mm Rod diameter: 110 mm Piston descent speed: 23 mm/sec Tank capacity: 30 liters

Condition: used, Airless spraying unit WIWA, type WIWA 10.000 Paint spraying unit Year of manufacture approx. 1980 Flow rate approx. 10 L/min Operating pressure approx. 250 bar Air inlet approx. 6.5 bar - Paint spraying gun WIWA No. 2, type WIWA 500D - Approx. 14.5 m high-pressure hose with paint spraying gun - Compressed air unit with pressure regulator and oiler Bjdpfxjzinzls Ad Iewu - Mobile base frame, pump unit with foldable suction pipe Space requirement L x W x H 700 x 700 x 1000 mm Weight 45 kg Good condition

Condition: good (used), Year of construction: 2023, machine/vehicle number: 231293, Offer 25452 Technical data: Bedpfox I Izrjx Ad Ijwu - Operating hours: 754 h - Working pressure: up to 13 bar - Delivery rate: 860 l/min - Drive: 400 V / 7.5 kW - Galvanised air receiver: 500 l - Integrated dryer RENNER Type RKT + 0065 - Automatic condensate drain - Required space: approx. W 650 x H 1650 x D 1400 mm - Weight: approx. 350 kg

Year of construction: 2008, condition: excellent (used), Stationary high-pressure pump unit Hammelmann HDP 77 on a base frame. Similar to/not an Uraca, Woma, or Kamat. Pump type: HDP 77 Operating pressure: 490 bar Flow rate: 59 l/min Drive speed: 1800 RPM Drive power: 65 kW with AC 55 kW 3~ motor AH 250 M-4; 400V; 50 Hz with frequency inverter Bodpfx Adod Rmqps Iowu Dimensions L x W x H: approx. 1665 x 1212 x 1641 mm Weight: approx. 1050 kg Year of manufacture: 2008 Condition: in very good used condition. Includes complete documentation.

Condition: used, Year of construction: 1986, Technical details: weight: 7,5 kg number of strokes: 2000 Hub / Min Torque: 15 kp dimensions L x W x H: 170x160x130 mm air pressure clamping unit application area operation of vise clamping consists: air pressure motor, impuls mechanism and a control mechanism air pressure supply necessary averaged operation pressure 0,4- 0,6 MPa Bodsu Nkk Repfx Ad Iswu air pressure consumption 1,1m³/min with 0,5 MPa tightening force: 80kN accessories: copy of documentation available 13 pcs available i.D. *

Year of construction: 2019, condition: like new (used), Condition: As good as new Container has not been in use. Was ordered for a large project, but never put into operation. perm. operating pressure: 22 bar volume flow: 490 m³/h empty weight: 2100 kg refrigerant: R717 dimensions: 2.200 x 1.180 x 1.940 mm frequency converter: Danfoss VLT with 132 kW Accessories: 1 x blowdown tank Aprovis 18180678-MSK 3 x thrust drive ARI Premio Plus 2G 2.2 kN 5 x gate valve Ari 1.0619N 3 x gate valve Ari JL1040 2 x shut-off valve KSB nw-6150BQ0465 3 x diaphragm valve KSB SISTO-16 TWA 1 x turbine volume measuring part / heat meter MWN130-NC 3 x KSB amri ACS 02ACCNY005 shut-off valve Bodpek Sgwajfx Ad Iswu 3 x strainer ARI 6 x gate valve Ai Ziva-G 1.4581

Condition: good (used), Year of construction: 2011, pressure: 330 bar, operating pressure: 330 bar, Stationary high-pressure pump unit Hammelmann HDP 77 on base frame. Similar but not Kamat, Uraca, Woma. Pump type: HDP 77 Operating pressure: 330 bar Flow rate: 59 l/min. Drive speed: 1,500 rpm Drive power: 37 kW Equipped with Siemens 1LA6223-4AA60 electric motor, 45 kW With pressure regulating valve, with safety valve, with oil cooling system. Dimensions (LxWxH): approx. 1,450x750x1,150 mm Weight: approx. 600 kg Year of manufacture: 2011 Bodpfx Aswyn Suod Iewu Condition: In good used condition. New oil pump.

Condition: excellent (used), Year of construction: 2017, Working width: 3 meters Pressing force: 130 tons Bwjdpfx Aozq A Ipjd Ieu

Condition: good (used), Year of construction: 1995, operating hours: 1,174 h, functionality: fully functional, pressure: 1,070 bar, operating pressure: 1,070 bar, fuel: diesel, power: 117.68 kW (160.00 HP), water pressure: 1,070 bar, pump capacity: 51 l/min, Good working Kamat high pressure pump Bodpfsrpmiajx Ad Iewu

Year of construction: 1995, condition: good (used), Stationary high-pressure pump unit URACA RS716E/400 on a base frame for all cleaning and pressure testing applications. Similar to, but not a Hammelmann, Woma, or Kamat. Operating pressure: 400 bar Flow rate: 56 l/min Drive speed: 1,475 RPM Drive power: 44 kW with SIEMENS 45 kW 3-phase motor 1LA6 223-4AA60 225M IP 55 with URACA MSÜV 16/700 and PSV8/800 valves Dimensions L x W x H: approx. 1300x1100x1400 mm Weight: approx. 1,115 kg Year of manufacture: 1995 Condition: in good used condition. Bwjdpofl Dwmefx Ad Isu

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, BITZER 4M35.2 (F 400 H) | Compressor unit | Piston refrigeration compressor with a tank Manufacturer: BITZER Kühlmaschinenbau GmbH Compressor model/type: 4M35.2 Tank model/type: F 400 H, Capacity: 39 liters Unit serial number: 4810377 Bwedpfx Adjy Ufh Ao Iou Year of manufacture: 1995 Power supply: 400 V / 50 Hz / 3 phases Rated electrical power: 26 kW Refrigerant: R417A Allowable operating pressure: 28 bar Overall dimensions of the unit: 2800 x 1300 x 1900 mm Vertical buffer/accumulator tank Dimensions: Ø 1100 x 2600 mm Industrial circulation pump Grundfos Complete power and control switchboard Dimensions: 850 x 1300 x 350 mm Technical condition and completeness: This professional, industrial refrigeration compressor (compressor-condenser unit) is a high-performance device designed for commercial and industrial refrigeration systems. Units of this type are widely used in meat processing plants, butcher shops, slaughterhouses, cold storage warehouses, breweries, and the dairy industry to supply refrigeration and freezer rooms, quick-cooling tunnels, or technological lines for cooling liquids. The heart of the system is the legendary, 4-cylinder semi-hermetic Bitzer compressor, characterized by its exceptional performance, high energy efficiency (even under partial load), and unparalleled mechanical durability. The compressor is integrated with a horizontal Bitzer F 400 H liquid tank with a capacity of 39 liters (pressure resistance up to 28 bar), which acts as a buffer for the liquid refrigerant, stabilizing the operation of the entire system under varying ambient temperatures and evaporator thermal loads. The offered set also includes additional extensive supporting infrastructure: a vertical medium buffer tank (dimensions: Ø 1100 x 2600 mm), a high-performance Grundfos circulation pump, and a control switchboard with complete electrical equipment and protection devices (pressure switches, contactors). Thanks to this, the unit can be used directly as a complete, self-contained refrigeration machine room.

Year of construction: 2012, condition: excellent (used), Stationary high-pressure pump unit, Hammelmann HDP 47, mounted on a base frame. Similar to, but not a Kamat, Uraca, or Woma. Pump type: HDP 477 Operating pressure: 300 bar Flow rate: 24 l/min Drive speed: 1500 rpm Drive power: 14 kW with AC motors ACM 160L-4/HE 3~ IP55 15kW electric motor, with pressure regulating valve, with safety valve, with oil cooling system. Dimensions L x W x H: approx. 1,100 x 750 x 1,200 mm Weight: approx. 570 kg Year of manufacture: 2012 Condition: In very good used condition. Bedpfsh Uc Nkjx Ad Iewu

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, power: 18.5 kW (25.15 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 175 t, stroke length: 265 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, table width: 104 mm, table length: 4,050 mm, table height: 900 mm, throat depth: 410 mm, distance table to ram: 530 mm, clearance between the columns: 3,600 mm, oil tank capacity: 250 l, total length: 6,450 mm, total width: 2,650 mm, total height: 2,750 mm, overall weight: 12,500 kg, number of support arms: 2, number of axes: 6, Equipment: CE marking, safety light barrier, 2013 Durma AD-S 40175 CNC Press Brake – 6 Axis – Cybelec ModEva 10S Control Bwedpfxsz Imc No Ad Ieu Used 2013 Durma AD-S 40175 CNC hydraulic press brake for sale in Ireland. 6-axis CNC press brake with Cybelec ModEva 10S graphic control, Y1, Y2, X, R, Z1 and Z2 axes, CNC motorised crowning, laser guards, tooling and rear safety doors. Manufacturer: Durma Model: AD-S 40175 Axes: 6 Year: 2013 Capacity: 4000mm x 175T Control: Cybelec ModEva 10S Control Includes: Large Selection of Top & Bottom Tooling Description 2013 Durma AD-S 40175 CNC Press Brake, a high-quality 6-axis CNC hydraulic press brake with 4050 mm bending length and 175 tonne bending force. This machine is ideal for precision sheet metal bending, fabrication workshops, engineering companies, subcontract metalwork and production environments requiring a robust, accurate and well-specified press brake. This Durma AD-S 40175 is fitted with a Cybelec ModEva 10S Graphic CNC Control, offering 3D graphical programming and automatic bend sequences. The machine has 6 CNC controlled axes: Y1, Y2, X, R, Z1 and Z2, giving excellent flexibility for accurate bending and efficient backgauge positioning. The machine is in very good condition and comes complete with a large selection of Euro-style top and bottom press brake tools, laser guards, foot pedal, CNC controlled motorised crowning, quick-release top tool clamps and rear safety doors. Key Features Bending length: 4050 mm Bending force: 175 tonnes Axis configuration: 6 Axis CNC controlled axes: Y1, Y2, X, R, Z1 and Z2 Control: Cybelec ModEva 10S Graphic CNC Control Condition: Very good condition Crowning: CNC controlled motorised crowning Tooling: Complete with Euro-style top and bottom tools Safety: Laser guards and rear safety doors Clamping: Quick-release top tool clamps Includes: Foot pedal Suitable for: Sheet metal fabrication, precision bending, general engineering, subcontract fabrication and production bending Technical Specifications Model: AD-S 40175 Bending force: 175 tonnes Bending length: 4050 mm Distance between columns: 3600 mm Y-axis rapid speed: 120 mm/s Y-axis working speed: 10 mm/s Y-axis return speed: 100 mm/s Crowning: Motorised Daylight: 530 mm Table width: 104 mm Table height: 900 mm Stroke: 265 mm Throat depth: 410 mm Support arms: 2 Backgauge finger blocks: 2 X-axis travel speed: 500 mm/s X-axis travel: 650 mm R-axis travel speed: 350 mm/s R-axis travel: 250 mm Motor power: 18.5 kW Oil tank capacity: 250 litres Machine dimensions: 6450x2650x2750 mm Machine weight: 12,500 kg Cybelec ModEva 10S Graphic CNC Control The machine is fitted with a Cybelec ModEva 10S Graphic CNC Control, a user-friendly press brake control designed for graphical programming and efficient bending setup. Control features include: 3D graphical control interface 10.4” colour TFT screen 128 MB RAM 128 DM main memory Easy Cursor operation Automatic bend sequence calculation Single-page part programming capability CAD/CAM sequence viewing support Included Equipment This used Durma AD-S 40175 press brake is supplied with: 6 CNC controlled axes: Y1, Y2, X, R, Z1 and Z2 Cybelec ModEva 10S Graphic CNC Control Large Selection of Euro-style top & bottom tooling CNC controlled motorised crowning Laser safety guards Foot pedal Quick-release top tool clamps Rear safety doors Front support arms Backgauge finger blocks

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Linde / Bitzer | Triple-Compressor Industrial Chiller Technical specifications of the frame: Unit manufacturer: Linde Aktiengesellschaft Model / Type: VHM 316-4521 Serial number: 10309 Year of manufacture: 1993 Refrigerant: R22 Allowable working pressure: 25 / 13 bar Overall dimensions of the frame: 2930 × 830 × 1870 mm Specifications of the installed compressors (3x Bitzer Kühlmaschinenbau GmbH): Power supply: 380–420 V (50 Hz) / 440–480 V (60 Hz) – 3 phases Maximum operating current: 24 A (per compressor) Volumetric capacity per unit: 42.3 m³/h (for 50 Hz) / 51.0 m³/h (for 60 Hz) Total volumetric capacity of the unit: 126.9 m³/h (for 50 Hz) / 153.0 m³/h (for 60 Hz) Protection class: IP 54 List of compressors in the section: Compressor no. 1: Type S4G-12.2 Y Serial number: 15851279 Compressor no. 2: Type S4G-12.2-40P Serial number: 1676905728 Compressor no. 3: Type S4G-12.2-40P Serial number: 1678210359 Industrial central multi-compressor unit (so-called "compressor pack") built by the German Linde Group based on three two-stage, semi-hermetic Bitzer reciprocating compressors from the S4G series. This type of system is designed to power low-temperature installations – freezers, freezing tunnels, and advanced refrigeration systems in food processing plants (meat, fish, bakery). The design based on three identical units allows for very flexible, three-stage cooling capacity management (in steps of 33%). The system automatically activates the appropriate number of compressors depending on the actual thermal load, which optimizes energy consumption and extends the service life of the components. The entire unit is mounted on a compact support frame, which facilitates installation. Key features: - Reliable Bitzer two-stage compressors: The two-stage compressor series is specifically designed for deep freezing. It ensures stable operation at very low evaporation temperatures and is characterized by a high energy efficiency ratio. Bjdpey Ub A Nofx Ad Iowu - Safety and automation of the Linde frame: The industrial design of the frame integrates a common suction and discharge manifold, an advanced oil equalization and separation system, and the necessary control and measuring equipment (protective pressure switches), which effectively protects the system from failures. - Industrial protection class (IP 54): Hermetic electrical boxes and the compressor design protect the system from moisture and dust, allowing for safe operation in harsh machine room conditions. - Application versatility: The unit is factory-designed to operate with R22 refrigerant. Due to the presence of compressors with the "Y" designation (filled with ester oil), the system can be successfully adapted to work with modern, environmentally friendly alternatives from the HFC group (e.g., R448A / R449A / R404A / R507) after a standard verification of seals and automation settings.

Condition: used, Printing width: 600 mm Colors: 4 Chamber doctor blade units: 3 Condition: used Bwjdpfx Aexpirrod Iou Features: • Manufactured by Windmöller & Hölscher (W&H) • Designed for inline use with bag-making equipment • 3 chambers with doctor blades for precise ink transfer • Compact, robust construction for easy integration • Ideal for retrofitting or adding inline print capability