Used Rounding Machine Tool for sale (66,935)

Condition: repair required (used), functionality: limited functionality, Offered for sale is a Maho 700 milling machine. Visually and technically in good condition. Includes digital readouts for the X, Y, and Z axes. Comes with a machine vise (as shown in the photos). It was used by us for apprentice training. The machine is being sold as in need of repair. Feed in the X and Y axes functions perfectly. The feed in the Z-minus direction also works. Only in Z-plus (raising) does it stick a little. However, this should be fixable with maintenance. The machine can be inspected under power in 45659 Recklinghausen. Kedpfxjy Rxvle An Usdl

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Kdsdjmck Ryjpfx An Ujl Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: used, GÜHRING Drill Bit Grinding Machine Type SS 15 Spiral Drill Bit Grinding Machine Serial No. 909 Year of manufacture: approx. 1977 Kdsdsdzp Tbspfx An Ujl Maximum drill diameter: 40 mm Grinding wheel diameter right: 300 mm Grinding wheel diameter left: 250 mm Grinding wheel width: 40 mm Grinding spindle speed: approx. 2800 rpm Motor power: approx. 2.2 kW Electrical connection: 380 Volt, 50 Hz - Point angle steplessly adjustable - Point thinning device - Gear motor for vertical oscillation in front of cup wheel - Diamond dresser holder - Various drill holders - Coolant system Required space (L x W x H): 1200 x 950 x 1550 mm Weight: approx. 1150 kg

Condition: excellent (used), Year of construction: 1992, 1 used, very well-maintained universal tool milling machine with 3-axis digital readout by HEIDENHAIN and infinitely variable speed adjustment Manufacturer: MAHO, Origin Germany Model: MH 1000 Year of manufacture: 1967 / geometrically overhauled in 1992 / 2006 retrofitted with inverter Working area Table size: 1250 x 740 mm Travel range X-axis: 1000 mm Y-axis (vertical): 600 mm Z-axis (cross): 750 mm Kodpfx Anoygctre Ujdl Manual cross travel of table: 275 mm Working spindle Tool holder, DIN 2079: ISO 40 Quill stroke of vertical spindle: 125 mm Speeds and feeds Speed range: 32 – 1600 rpm, infinitely variable! Feed range X + Z-axis: 10 – 500 mm/min Rapid traverse X + Z-axis: 1.4 m/min Feed range Y-axis: 5 – 250 mm/min Rapid traverse Y-axis: 0.7 m/min Motor power: 5.5 kW Linear measuring system resolution: 0.01 mm Dimensions and weight Dimensions (L x W x H): approx. 2400 x 2400 x 1800 mm Weight: 5500 kg Accessories / Special features: • 3-axis digital readout, HEIDENHAIN VRZ 760 B • Tool holder ISO 40, DIN 2079 • Universal clamping table (can be rotated, tilted, and swiveled) • Infinitely variable speed adjustment with MITSUBISHI A 700 inverter (retrofitted in 2006 with new control cabinet) • Circulating lubrication with oil cooler for the speed gearbox • Headstock with horizontal working spindle ISO 40 • Manual tool clamping with internal thread M16 • Headstock with horizontal working spindle • Central lubrication • Coolant pump Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 1994, x-travel 850 mm Kdjdpfxoy Nnxae An Ujl y-travel 630 mm z-travel 550 mm table surface area 1200 x 550 mm spindle taper SK 40 spindle turning speed range 20 - 4200 U/min spindle drive 11,5 kW quill stroke 95 mm feeds longditudinal/cross/vertical 1 - 10.000 mm/min rapid traverse longitudinal and cross 10 m/min rapid traverse vertical 10 m/min control HEIDENHAIN, TNC 426 total power requirement 21 kW weight of the machine ca. 6 t Accessories: NC-dividing unit (= 4th axis) with tailstock, make HOFMANN, model RWNC-160; vertical head with hydr. tool clamping and quill retraction, solid table, electron. handwheel, coolant

Condition: used, Year of construction: 1989, x-travel 600 mm y-travel 450 mm z-travel 400 mm table-size 850 x 440 mm spindle taper SK 40 control HEIDENHAIN TNC 355 ATC 32 Pos spindle turning speed range 20 - 4000 U/min spindle drive 5,9 kW quill stroke 80 mm feeds longditudinal/cross/vertical 1 - 2000 mm/min Kedpjy Nnw Njfx An Uodl power feed x/y/z 7200 N rapid traverse longitudinal and cross 10 m/min rapid traverse vertical 10 m/min total power requirement 12 kW weight of the machine ca. 3 t Acc.: NC-dividing unit (=4th axis) make WALTER with 3-jaw chuck 160 mmø, vertical head with hydr. tool clamping and quill retraction, solid table, various tool fixtures, electron. hand wheel, coolant

Condition: like new (used), Year of construction: 2021, operating hours: 5,999 h, functionality: fully functional, feed length X-axis: 2,000 mm, feed length Y-axis: 20,000 mm, feed length Z-axis: 2,000 mm, travel distance X-axis: 620 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, quill travel distance: 80 mm, spindle speed (max.): 4,500 rpm, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 5 m/min, table length: 820 mm, table width: 420 mm, rotational speed (max.): 4,500 rpm, rotational speed (min.): 1 rpm, overall weight: 1,970 kg, space requirement width: 2,435 mm, space requirement length: 1,875 mm, space requirement height: 1,800 mm, workpiece weight (max.): 350 kg, Equipment: rotational speed infinitely variable, Universal Milling and Drilling Machine High-quality, robust machine offering high precision, long service life, and maximum operating comfort. Multiple ribbed cast construction ensures full performance across the entire working area. Control System SIEMENS 840D SL path control Working Range X / Y / Z: 620 / 350 / 400 mm Drive System 2-stage main gearbox with high torque and automatic gear shifting Drive power 100% / 25% DC: 5.5 / 7.0 kW Kjdjy R Ebzspfx An Ujdl Torque 100% / 25% DC: 210 / 340 Nm Speed range: 0 - 4500 rpm, infinitely variable gearbox Digital Feed Infinitely variable feed rate on all axes Feed range: 0 - 2000 mm/min, infinitely adjustable Rapid traverse: 5 m/min Handwheel rotation: 2.5 mm per X / Y / Z axis Milling Head - Vertical Vertical milling head swivels +/- 90° (180°) Extendable vertical quill with manual clamping, stroke 80 mm Tool holder: SK 40 DIN 69872 Hydromechanical clamping system DIN 69872 – standard Additionally, the milling head can be shifted 150 mm on the Y-axis. For horizontal machining, the milling head does NOT need to be removed—simply slide it back into the rear rest position. Rigid Angle Table Clamping surface: 820 x 420 mm T-slots: 1 piece/14 H7 alignment slot, 5 pieces/14 H12, spacing 63 mm Table load: 350 kg Standard Equipment Direct linear measuring systems on all axes Wear-free digital drive, infinitely variable, for all axes Main spindle motor with spindle speed braking function Oriented spindle stop, vertical & horizontal, with threading cycle without compensation chuck Swiveling milling head with extendable quill Automatic axis feed in X, Y, Z with rapid traverse Mechanical safety handwheels with graduated ring on all axes Ball screws on all axes Electronic overload protection on all axes 2-channel emergency stop system Compact electrical cabinet integrated with machine Splash guard enclosure with optimal operator access Toughened glass window on rear of enclosure Top open, front and right door plus sliding door on front, secured with interlock switch Locked when unpowered; additional maintenance opening on left side—bolted, removable Freestanding mobile coolant tank, 80 liters (dimensions: 1250x460x200 mm) Automatic central lubrication Steel telescopic cover to protect Z-axis guideways Halogen machine lamp V24 Easy-to-use milling guard with plexiglass pane Operator manual, spare parts plan, and electrical diagram in paper form Set of machine feet Transport rod and stop rings for 2-strand lifting gear Color: Light grey RAL 7035 and tele grey RAL 7045 fine texture Footprint – Electrical Specifications Machine weight approx. 1970 kg Space requirement (W x D): 2435 x 1875 mm Power supply: 3x400 V AC 50Hz Power consumption: 17 kVA Max. pre-fuse: 35 A NH Network type: TN-S Connection type: fixed connection For further information, please refer to the PDF attachment. The machine is supplied without tools or accessories.

Condition: used, Year of construction: 2002, x-travel 600 mm y-travel 400 mm Kjdpfxoy N D Ide An Uedl z-travel 400 mm table-size 800 x 400 mm spindle taper ISO Sk 40 spindle turning speed range 10 - 3150 U/min total power requirement 12,0 kVA weight of the machine ca. 2,2 t dimensions 2,0 x 1,85 x 1,95 m CNC Universal Milling Machine - Heidenhain TNC 310 with handwheel - Hydraulic tool clamp - Central lubrication - Coolant system - Machine light - Machine feet - Enclosure

Condition: good (used), Year of construction: 1997, x-travel 600 mm y-travel 450 mm z-travel 400 mm Control Heidenhain 430 ITNC tool taper SK 40 voltage 400 V control voltage 24 V weight of the machine ca. 6 t - Operating hours: 48,690 Kdodpfxowbi A Do An Uol - Spindle hours: 13,465 - Max. table load: 1,000 kg - Machine weight: 6,000 kg - Includes tool holders – SK40 - Includes all descriptions - Includes programming manual – Heidenhain - Includes 1 machine vice - Includes clamping claws

Condition: excellent (used), Year of construction: 1979, functionality: fully functional, Universal Milling Machine Deckel FP2 with 3-Axis Active – TNC 111 Digital Readout by Heidenhain, incl. Accessories, Excellent Condition Technical Data: >> Year of manufacture: 1979, Machine No. 2202-10512 >> Fixed angle table Kjdpfxsy H Ibcs An Usdl >> Spindle speeds: 25 – 2500 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 2.2 kW >> Spindle brake >> Travel X/Y/Z: 400/220/400 mm >> Vertical milling head adjustable 150 mm on spindle carrier >> Vertical and horizontal quill – SK40 extendable >> Drawbar system M16 >> Weight approx. 1400 kg Equipment and Accessories: >> 3-axis TNC 111 Active digital readout by Heidenhain >> Coolant system >> Central lubrication >> 1 accessory cabinet containing: Collets, tool holders, clamping tools, tailstock, Dividing head with 3-jaw chuck, vise, tailstock, indexing plates, and much more About the Machine: For sale is a Deckel FP2 universal milling machine in excellent condition. The FP2 comes from a state-operated laboratory where it saw only minimal use. It includes an accessory cabinet with a wide range of tools. The machine has very little backlash, and all spindles move smoothly. The geometry is outstanding. Even at maximum spindle speeds, the milling machine runs quietly. On this newer FP2 model, the feed on all three axes is continuously adjustable and each axis has rapid traverse. A major advantage is the active 3-axis digital readout. With the Heidenhain digital control, set dimensions can be entered and the machine will automatically travel to these positions. An oil change has been carried out. The machine has been mechanically and electrically checked. The Heidenhain digital display makes operation easier and even more precise. Take advantage of the opportunity to view and test the machine under power on site.

Condition: used, Electric drive Cycle initiation via foot switch Kdjdpfx Aeythzujn Uol Various tools included in the scope of delivery: 1 x upper/lower blade with 4 mm radius 1 x upper/lower blade with 6 mm radius 1 x upper/lower blade with 7 mm radius 1 x upper/lower blade with 8 mm radius 1 x upper/lower blade with 9 mm radius 1 x upper/lower blade with 15 mm radius (currently installed)

Year of construction: 2003, condition: excellent (used), Schneeberger DMR Gemini CNC tool grinding machine TECHNICAL DATA Control: GE Fanuc 160, 5 axes simultaneous Software: Schneeberger Quinto Measuring system X,Y and Z axis: 0.1 μm A-axis: 0.0001° C axis: 0.0001° Grinding head Power: 15 kW speed: 50 - 10`000 rpm spindle nose: HSK 50 Max. wheel diameter: 250 mm Max. Number of grinding wheels: 6 Linear axes X-axis, travel: 380 mm feed speed: 20`000 mm/min resolution: 0,0001 mm gear ratio: 1 : 1 Power: 1,0 kW / 3 Nm Y-axis, travel: 300 mm feed speed: 5`000 mm/min resolution: 0,0001 mm Gear ratio: 24 :4 Power: 1,6 kW / 8 Nm Z-axis, travel: 280 mm feed speed: 20`000 mm/min resolution: 0,0001 mm gear ratio: 1 : 1 Power: 1,0 kW / 3 Nm Rotary axes C-axis: 210 ° Speed: 72 ° / s Resolution: 0,0001 ° Power: 1.6 kW / 8 Nm C` axis: +- 180 ° Speed: 90 ° / s Kdjdpfx Ansmqni As Ujl Resolution: 0,0001 ° Infeed: Hydraulic A axis: +- 360 ° Speed: 225 ° / s resolution: 0,0001° Power: 1,0 kW Nose: ISO 50 Center height: 210 mm Dimensions and weight Length: 1700 mm Depth: 2270 mm Height: 2260 mm Weight: 8`000 kg We do not guarantee the accuracy, completeness and timeliness of the information.

Condition: not inspected (used), Year of construction: 1986, feed length X-axis: 580 mm, feed length Y-axis: 400 mm, feed length Z-axis: 450 mm, spindle speed (max.): 2,500 rpm, Grunding Contour 2 table 800x460 mm Kdedpey E N Dvjfx An Uel travel 580x400x450 mm max spindle speed 2500 rpm spindle taper 40

Condition: excellent (used), Table 1,200 x 450mm, X 560 Y 510 Z 450. ISO 40 4,000Rpm, Heidenhain TNC 410 Ksdoy S T Tnjpfx An Usdl

Condition: good (used), Hydraulic Kdedpfx Anoy H Dr Do Uel Center height 130 mm Distance between centers 400 mm Tablesize 900 x 200 mm Grinding head turnable 360° Grinding spindle speeds 2'200 - 6'400 rpm Misc. accessories MARCELS MASCHINEN AG

Condition: good (used), Internal Item No.: 26045 Kjdpfx Aney Ibfqj Ujdl Universal Tool Grinding Machine Deckel S11 + Comprehensive accessory package + Optics with digital display + Extraction unit + Machine lamp Center height, universal dividing head: 170mm Center height, tailstock: 120mm Maximum workpiece diameter between centers: 338mm Maximum workpiece diameter for cantilever mounting: 600mm Maximum length between centers: 950mm Grinding stroke: 190mm Cross adjustment of tool carrier: 100mm Height adjustment of grinding head: 325mm Maximum grinding wheel diameter: 125mm The machine is fully functional and, by arrangement, can be inspected under power on over 500m² of heated warehouse space.

Condition: used, Year of construction: 1999, x-travel 620 mm y-travel 420 mm z-travel 400 mm Control Heidenhain TNC 124 swivellable manuell +/-45 ° max. tool diameter 125 mm max. tool weight 6 kg Kdsdpfx Anjy Ay Nqe Usl table surface area 400 x 800 mm T-slots 5x14x80 max. table load 400 kg feed speeds X/Y: 0 - 6.000 mm/min feed speeds Z: 0 - 4.000 mm/min rapid traverse X/Y: 6 m/min rapid traverse Z: 4 m/min total power requirement 11 kW weight of the machine ca. 2 t dimensions of the machine ca. 2,9 x 3,5 x 2,0 m

Condition: new, functionality: fully functional, Warehouse clearance of industrial accessories Specialized in spare parts for machine tools, CNC machining centers Siemens 8m, 850, 840C, 840D, Siemens NC motors Rexroth hydraulics and linear motion technology Festo pneumatics, Herion pneumatics Parker hydraulics Brinkmann pumps, pumps from various manufacturers Heidenhain measurement systems, ROD and linear measurement systems Coax coolant valves and sensors Balluff switches and sensors Phoenix Contact Römheld clamping devices Gerwah couplings HSK100, HSK63 tool holders Renishaw Kdedsy Ibgzjpfx An Ujl ABB Round sealing rings, Turcon Glyde seals Wickmann + Siemens fuses Euchner switches, Honeywell limit switches And much more... (not everything is shown in the pictures) Workbenches, drawer cabinets, heavy-duty shelving Final sale price with moderate asking: €950,000 Collection only

Condition: good (used), Year of construction: 2008, functionality: fully functional, Milling machine Macmon M 434 NC Manufacturer: Macmon Type: 434 NC Control: Heidenhain TNC 128 Year of manufacture: 2008 Condition: used X-axis: 400 mm Y-axis: 250 mm Z-axis: 400 mm Clamping surface 600 x 320 mm Main drive: AC motor kW 3 Speed range: Vertical infinitely variable 30 - 6300 Horizontal stepless 0 - 4200 - Feed rate 0 - 10 m/min Tool holder ISO 40 Operating voltage 400 / 50 Volt / Hz Control voltage 24V Weight 1200 kg Scope of delivery - Documentation - Machine feet - Coolant system - Spindle guard - Machine light - HR410 Handwheel - Horizontal spindle Counterholder Kdjdpfx Anjy Egccj Ujl

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, Universal Milling Machine Deckel FP3 with 3-Axis Active Digital Readout TNC 113 by Heidenhain and Infinitely Variable Feed—Excellent Condition Kdedpfoy D Tl Iox An Ujl Technical Data: >> Year of manufacture: 1983 Machine no. 2201-5919 >> Fixed angle table (reconditioned) >> Speed range: 25 – 2500 rpm >> Infinitely variable feed on all 3 axes >> Rapid traverse on all 3 axes >> Drive power: 2.0 / 4.0 kW >> Spindle brake >> Travel (X/Y/Z): 500 / 300 / 400 mm >> Vertical milling head movable on spindle head by 200mm >> Vertical and horizontal quill—SK40 extensible >> Pull-in system S20 x 2 >> Weight approx. 1500 kg Equipment and Accessories: >> 3-axis active digital readout Heidenhain TNC113 >> Coolant system >> Central electric lubrication About the machine: Offered here is a Universal Milling Machine Deckel FP3 in very good condition. The machine has very little backlash and all spindles move smoothly. On this newer FP3 model, the feed is infinitely adjustable in all three axes, and the machine also features rapid traverse for each axis. A major advantage is the active 3-axis digital readout. With the Heidenhain control, you can input dimensions that the machine will automatically position to. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain DRO makes operation both easier and even more precise. Take advantage of the opportunity to inspect and test the machine under power on site. The machine is available immediately.

Condition: good (used), Year of construction: 2004, Ref. -No.: 10629 Manufacturer: MICHAEL DECKEL Type: S20 Turbo Year of construction: 2004 Type of control: CNC Storage location: Halberstadt Country of origin: Germany Workpiece Diameter: 250 mm Max. Grinding length: 340 mm Max. Workpiece Weight: 50 kg Grinding wheel diameter (max.): 150 mm Turning Speeds: 8000 RPM Workpiece holder: SK 50 Further information: Kjdpey Ed Sbjfx An Uodl The machine can be viewed while powered up.

Condition: used, Deckel milling machine FP1 with 3-axis digital readout, 380V, 120–1900 rpm. Travel distance X-axis: 300 mm, Y-axis: 150 mm, Z-axis: 340 mm. Tool holder: MK 4 with draw thread S 20 x 2. Milling head type: Vertical milling head. Table type: Fixed table. Table clamping area: 600 x 210 mm. T-slot size: 12 mm. Feed X-axis: 290 mm, Y-axis: 150 mm, Z-axis: 330 mm. Weight: 700 kg. Deckel FP1 milling machine. Ksdpjy Ddd Ujfx An Uedl

Condition: used, Guideway and surface grinding machine WMW FRITZ HECKERT Aschersleben type SZ 1000 x 1250 x 3000 / 344 Kdedpfx Ajhv A A Den Usl make no. 13.2236.2 year of construction 1989 nominal grinding area 3000 x 1250 mm table clamping area 3240 x 1000 mm grinding length max. 3300 mm Machining width 1250 mm Machining height 1250 mm grinding wheel diameter (surface grinding support) max. 600 mm grinding wheel width (flat grinding support) max. 100 mm grinding wheel diameter (swivel support) max. 450 mm Mains connection 400 Volt, 50 Hz - grinding support swiveling, drive power 16,5 kW, infinitely variable speed - grinding support for surface grinding, drive power 15 kW, infinitely variable speed - new electrical control, based on SIEMENS S7 from year 2001 - new electric control cabinet beside, year of construction 2001 - infinitely variable grinding wheel speed at both grinding supports - swiveling wheelhead for guideway and profile grinding - swivel-mounted and height-adjustable control panel - coolant system adjacent - Hydraulic system adjacent - oil circulation lubrication adjacent - Various grinding wheels and holders space requirement complete L x W x H 11900 x 7700 x 4600 mm weight 45 ton. very good condition

Condition: ready for operation (used), DECKEL FP 2 Tool Milling Machine from Educational Facility - Well-maintained original condition - Travel paths X/Y/Z 400x200x400mm - 3-axis digital readout "NEW" - Swivel table – clamping surface 700x350mm - Speed range: 40 - 2000 rpm - Automatic feeds/rapid traverse on all three axes - Tool holder ISO 40 - Vertical/horizontal milling attachment - Vertical head swivels and features a quill for drilling - Coolant system - X-AXIS leadscrew nut "NEW" - Machine feet - Various tool holders - Chip guard - Machine base - Documentation Kodjx Hyuhjpfx An Ujdl Dimensions: LxWxH 1.5x1.7x1.8 meters / Weight: 1500kg Errors and omissions excepted.

Condition: used, functionality: fully functional, Milling machine Deckel FP 4 M 3-axis digital readout Heidenhain Ksdpfoy Awz Rsx An Usdl Work area: 500 x 400 x 400 mm Drive power: 4 kW Fixed table 800 x 460 mm Chip tray Spindle taper SK 40 Speed range n 50-2500 rpm Feed rates 8-630 mm/min Rapid traverse 1.3 m/min Space requirement approx. 2 x 2 x 2 m Weight approx. 1650 kg