Used Rbz Hot Stamping Machine for sale (67,395)

Condition: used, sheet width 750 mm plate length 1250 mm plate thickness 4 mm table surface area 1600 x 1050 mm no. of strokes 180 Hub/min max. punching diameter 105 mm punching pressure 25 t total power requirement 4,0 kW Lodpfxjxfb Hme Afkjhk weight of the machine ca. 1,8 t dimensions 1,9 x 1,9 x 1,7 m Punching and nibbling machine - Digital readout for X and Y axis - Tool cabinet with tools

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, equipped with: 1 slide feeding system right hand side 1 eccentricpress 250 kN 4 standard slide units 1 narrow slide units 1 cam shaft working range: wire diameter range: 0,5 - 5,0 mm Lhjdpfjtzlzajx Afkok stripmetal width: max. 40 mm feeding length: up to 320 mm outout: up to 135/min

Condition: excellent (used), Year of construction: 1974, functionality: fully functional, equipped with: 1 pce. gripper feeder system right hand side 1 pce. Eccentricpress 70 kN 4 pcs. Standard slide units 1 pcs. Narrow slide unit 1 pce. Camshaft working range: Ledpfx Afeyn Rg Aokjhk wire diameter range: 0,5 - 3,5 mm strip metal width: up to 32 mm feeding length: up to 170 mm output: up to 250/min.

Condition: used, Single-column – Eccentric press EBU, Type 75 SKU Machine No. P 4598462, Year of manufacture 1962 Pressing force 75 tons Reach 300 mm Table area 800 x 620 mm Die opening 325 x 225 mm Slide area 470 x 180 mm Tool holder bore Ø 40 mm Table height above floor 845 mm Stroke adjustment 16 - 140 mm Slide adjustment 80 mm Maximum installation height approx. 420 mm Stroke rate 60 + 105 strokes/min Motor power 4 kW Power supply 380 Volts, 50 Hz - Pneumatic clutch-brake combination EBU - Overload protection with shear plate in the slide - Tool monitoring system UNIDOR, Type APS MINI - Mechanically driven strip feed with strip straightener OSTERKAMP, Type ZPN 200/350 - Strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds through 2 V-belt stages on the gear pre-stage - Two-hand operation - Simple work area guard that can be swung open - Table height adjustment in the lowest position = threaded spindles for adjustment 50 mm below floor level - Control cabinet and operator panel for tool monitoring located beside the machine - Automatic central lubrication - 4 machine feet Space requirement L x W x H 2600 x 2300 x 2450 mm Weight approx. 5.5 tons Ledpfsdzqltjx Afkjhk Good condition

Condition: excellent (used), Year of construction: 1967, Equippment: 1 Gripper feeding system right hand side 1 Eccentricpress 90 kN 2 Narrow-slide-units Ljdpfxepq H Upo Afkjhk 3 Standard-slide-units Working range: Wire diameter range: 0,5 - 3,5 mm Stripmetal width: max. 32 mm Feeding length: max. 170 mm Output: max. 250/min.

Condition: excellent (used), Year of construction: 1977, functionality: fully functional, equipped with: 1 pce. gripper feeder system right hand side 1 pce. gripper feeder system left hand side 1 pce. Eccentricpress 70 kN 1 pce. Campress Lhedpfxsrpk Axj Afksk 3 pcs. Standard slide units 2 pcs. Narrow slide unit 1 pce. Camshaft working range: wire diameter range: 0,5 - 3,5 mm strip metal width: up to 32 mm feeding length: up to 170 mm output: up to 250/min.

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Equippment: 1 Grip feeder system right hand side Lhsdpetmty Njfx Afkok 1 Eccentricpress 70 kN 3 Narrow slide units 1 Control shaft Working range: wire diameter range: 0,5 - 3,0 mm strip metal width: max. 40 mm feeding length: max. 240 mm output: max 400/min

Condition: used, Year of construction: 2001, gebraucht 2001 9647 prompt, Zwischenverkauf v Italien 24400 € 1 30 to 1250+N x 1000 mm 1250 mm 1000 mm 40 m/Min 30 m/Min 50 m/Min 30 mm 730 1/Min 300 1/Min 980 mm 4 kW 115 l 4000 mm 2780 mm 1900 mm 4000 x 2300 x 1900 mm + Z mm 4800 kg With 6-way multitool holder MTE6 (max. Dm. 24 mm) 2 Clamping claws Table with Brushes, table dimension 1970 x 2260 mm Foot pedal 2 pcs. additional single matrix holders PC with Euromac Software Eurowin 8.36 Max. Punching force 300 kN Automatic repositioning up to 10.000 mm Max. Punching diameter for single tool 88,9 mm, Ljdewirkgspfx Afkjhk Max. Punching diameter Multitool Holder MTE6 Dm. 24 mm Max. Opening the clamping claws 7 mm Transport width: 2350 mm User Manual in english and italian CE declaration available WITH LARGE TOOL PACKAGE several pieces of each of the following dimensions: Round: Dm. 2,5/2,8/3/3,12/3,2/3,5/3,9/4,1/4/4,5/5/5,2/5,5/6/7/7,5/8/8,5/9/9 ,5/10/10,5/11/11,5/12/12,5/13/13,5/14/15/16/18/19/20/21/23 Square: 10/12/13/15 mm Rectangle: 5x2/20x2/22x4 mm Oblong hole: 10x6,5/12x8,5/12,2x10,7/18x5 mm BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: ready for operation (used), Year of construction: 1963, functionality: fully functional, Hot Foil Stamping Platen / Heidelberg GTP Hot Foil Stamping Platen, Year 1963 - Serial No. GTP 61634 Min. format: 85 x 102 mm Max. format: 340 x 460 mm Lhjdpfjyk Siqsx Afkjk Speed: min. 1,500 sph – max. 4,000 sph Punching pressure: 60T Weight approx. 2,250 kg Complete with tools and accessories, including chase/frame Price on request Available immediately

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: M50E/9044, Offer Number: M50E/9044 Machinetype: hot rolling machine Make: SKF Type: EMB 200A Lhjdpjw E N Saefx Afkjk Constr. year: 1980/2021 diameter range: 200 mm max. outside dia. of round pieces: 200 mm kind of heating: 200 KVA Location: Europe

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: M50E/9046, Offer Number: M50E/9046 Machinetype: hot rolling machine Make: SKF Type: EMB 110 Lhedpfx Afsw Nxiujkok Constr. year: 2001/2021 diameter range: 110 mm max. outside dia. of round pieces: 110 mm kind of heating: 335 KW Location: Europe

Year of construction: 2025, condition: new, Dimensions (L/W/H) 0x0x0 mm Weight 35 kg Total power requirement 0 kw Lhodsvz Hvcjpfx Afksk

Year of construction: 2025, condition: new, Dimensions (L/W/H) 0x0x0 mm Weight 90 kg Total power requirement 0 kw Lhedpfxevz Hvvs Afkok

Year of construction: 2025, condition: new, Dimensions (L/W/H) 0x0x0 mm Weight 90 kg Lhjdpfx Afsvz Hvijkjk Total power requirement 0 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 0x0x0 mm Weight 90 kg Total power requirement 0 kw Ljdpevz Hvpjfx Afkshk

Year of construction: 2025, condition: new, Dimensions (L/W/H) 0x0x0 mm Lsdpfxsvz Hu Ss Afkjhk Weight 35 kg Total power requirement 0 kw

Year of construction: 1984, condition: good (used), Bihler RM 40 (1984) - Multislide punching stamping bending former Lhodpfsh T Ulyex Afkek Machine is shown with 5 slides, however, a 6th one is available. Several pay-offs for strip or for wire are available. Machine with 8-tons press and 5 or 6 slides - hydraulic clamping for wire or strip. One machine if fitted with a additionnal feeding system from the back of the machine, thru the center hole

Condition: excellent (used), Offer consisting of: PZ-82 (57x82 cm), hot foil stamping cylinder in exceptional condition, immediately available, test possible. Ledpfx Aeynuudofkehk

Condition: used, Year of construction: 1992, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm weight of the machine ca. 4,5 t lock stroke 230 mm capacity of ejector 40 kN ejector stroke 70 mm height of form 120-350 mm column diameter 56 mm casting capacity 55 kN casting plunger stroke 130 m/m injection plunger diameter 45,50,55 mm casting volume (DIN 24480) 76,121,165 cm 2 volume cast pressure 345,280,231 kp/cm² casting area 174,214,260 cm 2 Traverse Stroke 150 m/m Used Die Casting machine DAW 50 with SBC 2 control for the use of zinc alloys. Available from used machine stock. The machine is equipped with an electric furnace from Rauch Typ MO50E and used pneumatic sprayer 401. Lhsdpfx Asfrvzvsfkjk Recommendation from the manufacturer is some repair in the overhaul plant. It can be carried out in the scope of agreement.

Condition: used, Year of construction: 2000, closing pressure 900 kN clamping plate 540x540 mm distance between columns 350x350 mm weight of the machine ca. 5,5 t lock stroke 280 mm capacity of ejector 60 kN ejector stroke 70 mm height of form 160-400 mm column diameter 65 mm casting capacity 75 kN casting plunger stroke 130 m/m injection plunger diameter 50,55,60 mm casting volume (DIN 24480) 119, 163, 214 cm 2 volume cast pressure 380, 315, 265 kp/cm² casting area 236, 285, 340 cm 2 Traverse Stroke 150 m/m General overhauled Die Casting machine DAW 80 GO with DataLogic control for the use of zinc alloys. Ledpfx Afjyzt D Eekehk Excerpt from the overhaul: · Upgrade of the machine with new control cabinet and operator panel including new electric machine installation · Renewal of the hydraulic system (blocks and valves) · locking unit overhaul Details available upon request The machine is equipped with the following options: Front door motorized, rear door manual handling Cover for drop through area at the subframe Hanging operating desk with monitor 1.0.2 Cover for drop through area at the subframe with scale / chute 3.2.4 Multi-chamber furnace with pump TOC 3.2.1 furnace control cabinet 4.0.1 Hydraulic system for water glycol 6.1.3.1 Wired signal interface for extraction device (DISPO 010) 6.5.2 Equipment package, Remote Service Dialog (RSD) with switch 7.2.2.2 Spraymotion 611 E with servo drive 7.3.1 Lubricant container TD 20 7.4.0.3 Spray rail CR 275 Other options can be offered upon request

Condition: new, Year of construction: 2025, closing pressure 240 kN clamping plate 380x380 mm distance between columns 250x250 mm weight of the machine ca. 3,0 t lock stroke 180 mm capacity of ejector 28 kN ejector stroke 50 mm height of form 120-300 mm column diameter 45 mm casting capacity 43 kN casting plunger stroke 85 m/m injection plunger diameter 36,40,45 mm casting volume (DIN 24480) 47,63,87 cm ³ volume cast pressure 420,340,270 da/cm² casting area 56,70,88 cm 2 Traverse Stroke 150 m/m Equipment of the machine 1.0.2 Cover for drop through area at the subframe with scale/chute 1.0.3 Cover for small parts in the subframe 1.1.0 Motorized guard in casting direction left 1.4.0 Machine positioning mounting pads 1.5.4 Machine interior illumination 1.11.0 Convenience package energy efficiency 2.0.1.2 Ejector function package "Technology" including SensiEject 2.6.4 Machine assistance system SensiLock Lhsdpfxex Hp E Ae Afkjk 2.8.0 Hydraulic adjustment of locking unit for shot positioning 3.0.1.2 Casting assistance package Technology including SensiInject 3.2.9 EcoMelTec multi-chamber furnace with pump (surcharge) 3.4.4 Prefilling process 3.4.5 Simplified piston removal 3.4.6 Piston stop during return stroke 3.5.2 Electric nozzle and gooseneck heating (extended version) 3.5.3 Plug-in connections for electric nozzle and gooseneck heating 4.5.0 Shut-off facility for hydraulic locking and injection unit 4.6.1.2 Integrated water circuit 2+4 circuits 5.1.0 Machine control DATADIALOG - Realtime Control (RC) 5.1.5 Maintenance plus package 5.6.0 Special cable lengths 6.1.3.1 Wired signal interface for extraction device (DISPO 010) 6.1.4 Serial interface for 4 heating-cooling circuits ROBAMAT 3.1 6.1.5 Interface for Vacuum unit 6.3.1.1 Hanging operating desk with monitor 6.5.2 Service Package RSD with Switch for each additional machine 7.2.1.2 Spraymotion 411 E with servo drive 7.2.10 Extended spraying program for spraymotion 7.3.1 Lubricant container TD 20 7.4.0.1 Spray rail CR 155

Condition: new, Year of construction: 2020, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm lock stroke 230 mm ejector stroke 70 mm capacity of ejector 40 kN height of form 120-350 mm Column diameter 56 mm casting capacity 54 kN Injection stroke 130 mm injection piston diameter 45, 50, 55 mm Lhedpfx Afjiu Smbokek Casting volum 109. 150, 194 cm³ volume cast pressure 339. 274, 226 daN/cm² Casting area 176, 218, 264 cm² weight of the machine ca. 3,5 t Equipment of the machine 1.0.1 Cover for drop through area at the subframe 1.0.2 Cover for drop through area at the subframe with scale/chute 1.1.0 Motorized guard in casting direction left 1.4.0 Machine positioning mounting pads 1.5.4 Machine interior illumination 1.11.0 Convenience package energy efficiency 2.0.1 Ejector assistance packages 2.4.2 Securing of ejector platen 2.6.4 Machine assistance system SensiLock 2.8.0 Hydraulic adjustment of locking unit for shot positioning 3.1.1 Nitrogen pressure control for piston accumulator 3.2.4 Multi-Chamber furnace with pump 3.2.5 Isolated Cover for Crucible Multi-chamber-furnace 3.4.4 Prefilling process 3.4.5 Simplified piston removal 3.4.6 Piston stop during return stroke 3.5.2 Electric nozzle and gooseneck heating (extended version) 4.5.0 Shut-off facility for hydraulic locking and injection unit 4.6.1.2 Integrated water circuit 2+4 circuits 5.1.0 Machine control DATADIALOG - Realtime Control (RC) 5.1.2 Convenience Package – Casting – 5.2.1 Ejector Pressure graphics in DATADIALOG control 5.4.1 Data logging Scope 5.4.2 Configurable In- and Outputs 5.6.0 Special cable lengths 6.1.3.1 Digital interface for Non-FRECH extractor (Dispo 10) 6.1.4 Serial interface for 4 heating-cooling circuits ROBAMAT 3.1 6.3.1.1 Hanging operating desk with monitor 6.5.2 Service Package RSD with Switch for each additional machine 7.2.2.2 Spraymotion 611 E with servo drive, 1-circuit 7.2.10 Extended spraying program for spraymotion 7.3.1 Lubricant container TD 20 7.4.0.2 Spray rail CR 245 7.12.3 Low noise chute

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 292500 € 30 to 3000x1500 mm 3000 mm 1500 mm 70 m/Min 60 m/Min 120 m/Min 40 mm 1200 1/Min 325 1/Min 2800 1/Min 6 mm 3 mm 3 mm 1.5 mm 28 0,1 mm 0,05 mm 22 U/Min 150 U/Min 200 kg 940 mm 6 bar 88.9 mm Lhjdpfx Afjynna Hjkek 15 kW 180 l 6650 mm 7650 mm 6300 mm 8300 mm 2310 mm 18250 kg Control unit, Siemens Sinumerik 840 D SL CAD-CAM software Programming on the control panel Remote diagnostic function Automatic clamp positioning Network Ethernet communication Automatic tool lubrication UPS for control panel Movable scrap box Brush table Oil Cooler USB Driver Command pedal Web cam for service Reposition on X axis Alignment Tools for Index Station D Manual nesting turret (27 stations without tool and holder): 11 x A-Station fix: 0,8-12,7 mm 11 x B-Station fix: 12,8 - 31,7 mm 2 x C-Station fix: 31,8 - 50,8 mm 1 x D-Station fix: 50,9 - 88,9 mm 3 x D-Station Index: 50,9 - 88,9 mm Infra-red light barriers according to CE rules PRICE FCA TÜRKIYE

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 249800 € 30 to 2500x1250 mm 2500 mm 1250 mm 116 m/Min 80 m/Min 140 m/Min 40 mm 1200 1/Min 425 1/Min 3200 1/Min 6 mm 3 mm 3 mm 1.5 mm 27 0,1 mm 0,05 mm 22 U/Min 150 U/Min 120 kg 940 mm 6 bar 88.9 mm 15 kW 5750 mm 6800 mm 5360 mm 7360 mm 2310 mm 12960 kg Control unit, Siemens Sinumerik 840 D SL CAD-CAM software Programming on the control panel Remote diagnostic function Automatic clamp positioning Network Ethernet communication Automatic tool lubrication UPS for control panel Movable scrap box Brush table Oil Cooler USB Driver Command pedal Web cam for service Reposition on X axis Alignment Tools for Index Station D Manual nesting turret (27 stations without tool and holder): 11 x A-Station fix: 0,8-12,7 mm Lhedpfx Afjynnayjkek 11 x B-Station fix: 12,8 - 31,7 mm 2 x C-Station fix: 31,8 - 50,8 mm 1 x D-Station fix: 50,9 - 88,9 mm 3 x D-Station index: 50,9 - 88,9 mm Infra-red light barriers according to CE rules Price FCA Türkiye

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 209800 € 3371.76 € 20 to 2000x1250 mm 2000 mm 1250 mm 90 m/Min 70 m/Min 114 m/Min 1100 1/Min 375 1/Min 1200 1/Min 6 mm 3 mm 3 mm 1.5 mm 27 0,1 mm 0,05 mm 30 U/Min 150 U/Min 100 kg 940 mm 6 bar 88.9 mm 7.5 kW 5600 mm 6600 mm 4200 mm 6200 mm Lhodpfx Afsynnatekek 2310 mm 11000 kg Control unit, Siemens Sinumerik 840 D SL CAD-CAM software Programming on the control panel Remote diagnostic function Automatic clamp positioning Network Ethernet communication Automatic tool lubrication UPS for control panel Movable scrap box Brush table Oil Cooler USB Driver Command pedal Web cam for service Reposition on X axis Alignment Tools for Index Stations C+B Station Manual nesting turret (27 stations without tool and holder): 11 x A-Station fix: 0,8-12,7 mm 10 x B-Station fix: 12,8 - 31,7 mm 2 x B-Station Index: 12,8 - 31,7 mm 1 x C-Station fix: 31,8 - 50,8 mm 1 x C-Station Index: 31,8 - 50,8 mm 2 x D-Station fix: 50,9 - 88,9 mm Infra-red light barriers according to CE rules