Used Pm Pm100 for sale (1,652)

Year of construction: 2024, condition: used, cutting width 180 mm Nsdsvnwfuspfx Ac Aowl Cutting height Ø140 mm Motor output 2,2 kW Cutting height at 45° Ø120 mm Dimensions (L/W/H) 700x950x1750 mm machine weight ab. 180 kg

Condition: used, empty load weight: 7,070 kg, maximum load weight: 26,930 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 07/1996, loading space volume: 55 m³, suspension: air, tire size: 385/65R22.5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3-axles, BPW axles, air-suspended, lifting+lowering, ABS (anti-lock braking system), walkway, U-protection, lateral aluminum wheel guards, supports Body: Silo trailer with 4 compartments approx. 55m³ 3x 8t BPW axles! Hose holder on both sides! Good condition! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Nwodpfx Acjvhh Rno Ajl - .

Condition: used, functionality: fully functional, mileage: 30,389 km, power: 129 kW (175.39 HP), first registration: 12/1992, fuel type: diesel, empty load weight: 8,010 kg, overall weight: 12,500 kg, axle configuration: 4x4, fuel: diesel, color: red, driver cabin: day cab, gearing type: mechanical, suspension: steel, Year of construction: 1992, operating hours: 2,466 h, operation weight: 8,010 kg, Equipment: all wheel drive, crane, differential lock, trailer coupling, Fire engine: + Brimont + Model PM - ETR R42A9 + First registration: 08/12/1992 + 30,389 km; 2,466 operating hours + 175 HP diesel engine + 5-speed manual gearbox with reduction gear + Switchable all-wheel drive + Lockable differentials + Twisting (lockable) chassis frame + Selectable front-, rear-, and all-wheel steering, crab steering + Hydraulic winch 4,500 kg Nwsdpfxjwu Eh Ae Ac Asl + Tow hitch (3,500 kg) + Cabin protection grille + Mechanical rear crane + Spare wheel + Water tank 3,000 l + Portable fire pump (not tested) + Unladen weight: 8,010 kg; gross vehicle weight: 12,500 kg + Fire service vehicle from first owner Receive all newly listed vehicles via email – Subscribe to our NEWSLETTER! Subject to errors and misprints. Sale subject to prior sale!

Condition: good (used), functionality: fully functional, Year of construction: 1992, main lifting speed: 12,000 mm/min, fine lifting speed: 2,000 mm/s, -KOM 3160- Offered here is a Demag industrial lifting crane. This crane can lift loads up to 80 kg. In addition to the crane, you will receive the corresponding motor unit including the chain hoist, consisting of the chain and hook block. The dimensions can be found in the last image. The inspection logbook will be provided upon purchase. Type: PM V8 V1 F6 Year of manufacture: 1992 Number of load strands: 1 Main lifting speed (m/min): 12 Fine lifting speed (m/min): 2 Nwsdexcnmnspfx Ac Asl kW: 0.2 / 0.03 Protection class: IP 54

Condition: used, mileage: 494,000 km, power: 235 kW (319.51 HP), first registration: 08/2009, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: mechanical, loading space length: 6,600 mm, loading space width: 2,550 mm, Year of construction: 2009, Equipment: ABS, air conditioning, crane, Volvo FE 320 / 6x4 Platform 6,60 m + CRANE + REMOTE ONTROL Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2009 ? MILAGE: 494 000 km EQUIPMENT: ? ABS ? C. LOCKING ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? TACHOGRAPH ? AIRCONDITION PLATFORM: 660 x 255 cm (L x W) CAPACITY: 14 000 kg TOTAL WEIGHT: 26 000 kg WHEELBASE: 450/135 cm TIRE SIZE: 13R22,5 SUSPENSION: SPRING Nodjzt E Anjpfx Ac Aswl CRANE: PM 16 LG + REMOTE CONTROL poka? kontakty TEL: poka? kontakty KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO poka? kontakty SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? poka? kontakty LASZLO - MAGYAR poka? kontakty COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr)

Condition: like new (used), functionality: fully functional, power: 3 kW (4.08 HP), High-Gloss Polishing Machine / Polishing Stand Manufacturer: Bauerrichter Model: PM 88 This machine comes from a kitchen manufacturer and was used for, among other things, high-gloss fronts. The ultimate solution for stationary polishing! Motor approx. 3 kW, 230/400V Polishing shaft height / working height approx. 900 mm Nwedpfx Acjym Atre Ajl Polishing ring diameter max. 450 mm Usable polishing width 140 mm Storage table for e.g. polishing agents, tools... approx. 350 x 350 mm Execution - Stable, welded steel construction with mounting flange for floor fastening - One continuous polishing shaft, with polishing rings mounted on both right and left sides - Integrated storage table for polishing materials - Cover/protective hoods over the polishing rings Dimensions approx. 1600 x 1000 x 1200 mm (LxWxH) Weight approx. 400 kg Including brand-new pleated polishing mop set

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, AXA ELECTRO-HYDRAULIC PRESS WITH MOVING CYLINDER. Capacity: 150 tons. Dual automatic speed with rapid traverse. Special electrical panel with fast/slow switch for one-hand operation. Moving cylinder with 816 mm traverse stroke. Internal daylight from shoulder to shoulder: 1500 mm. Ram stroke: 300 mm. No. 01 AXA PM150/15 ELECTRO-HYDRAULIC PRESS WITH MOVING PISTON – NEW CONDITION “CE” MARKED. -DUAL AUTOMATIC SPEED WITH RAPID TRAVERSE. -COMPLETE WITH A SPECIAL ELECTRICAL PANEL FOR FAST/SLOW SWITCH FOR ONE-HAND OPERATION. -TECHNICAL DATA SHEET ATTACHED. -Applied force: 150 tons -Cylinder stroke: 300 mm -Internal daylight: 1504 mm Nwsdslruhdspfx Ac Asl -Approach speed (rapid traverse): 1450 mm/minute -Working speed (slow): 105 mm/minute -Cylinder ram stroke: 300 mm -Cylinder ram diameter: 110 mm -Stem diameter: M30 -Tank capacity: 50 liters -Max. pressure: 350 bar -Voltage: 400 V, Frequency: 50-60 Hz -Power: 3 kW motor -Max. current consumption: 7.3 A -Weight: 1500 kg GALTECH distributors. • 2MP block. • No. 2 VIVOIL external gear unidirectional pumps. One for rapid approach and return (calibrated at 20 bar), and one with adjustable pressure controlled by a handwheel to set the required power. • Maximum pressure valve with mechanical lock to prevent overpressure. • Standard pressure gauge to display the applied force. • INTECH electrical panel certified according to current regulations and with independent CE marking.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 15040169 + 0805014349, Pfeiffer Vacuum GmbH Turbomolecular pump with drive electronics, PM P03 020 GA, TPH 2101 P + PM C01 713, TC 750 Turbo pump model: PMP03020GA, TPH2101P Drive electronics model: PMC01713, TC750 Turbomolecular pump: Serial number: 15040169 Inlet connection nominal diameter: DN 250 ISO-K Outlet connection nominal diameter: DN 40 ISO-KF Flood connection: G1/8" Nominal speed: 31,500/min (525Hz) Suction speed N2: 1,900l/s Max. backing pressure N2: 1.5mbar Max. backing pressure He: 1.0mbar Max. backing pressure H2: 0.5mbar Oil: PM 016 144-T Nwedpovrzakofx Ac Aol Drive electronics: Serial number: 0805014349 Input: 24/48/72/140V DC +/-5%, 5.4A Output: 0-140V AC, 0-1600Hz, 6.5A Note on condition: 1. Statements on operating hours are approx. 13,000h with approx. 1,600 starts and stops. 2. Process gases: nitrogen and argon 3. Process dusts: chromium nitride and steel 100Cr6 4. The pump was stored in full working order in 2018 and cleaned externally.

Condition: used, Year of construction: 2013, x-travel 6000 mm y-travel 4750 mm z-travel 1500 mm control Siemens 840 D SL Table Verschiebetisch table load max. 20 t Tool changer 120 pos. tool taper SK 50 size of pallet 2200x1500 mm spindle power 46 kW Aggregate (pick-up max. 5 positions): Ortho head 1x1 degree Short vertical milling attachment Heavy angle head Long angle head The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More Nwedpsyr Aq Ujfx Ac Asl than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 2000, machine/vehicle number: 0-201-22-3325, functionality: fully functional, workpiece length (max.): 5,800 mm, workpiece width (max.): 1,200 mm, controller model: Homatic-CNC System PC83 mit Windows NT 4.0, feed rate X-axis: 80 m/min, spindle speed (max.): 18,000 rpm, No minimum price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the machine on 20/03/2026! 4-axis CNC machining center for drilling, milling, edge banding, and finishing: - Saw and crosscutting unit for tool changer - Drilling and milling unit (4 spindles) for tool changer - Combination flush-trimming and finishing unit for tool changer - Blow-off nozzle for workpiece edge, compatible with tool changer Attention: Except for the units listed above, no vacuum suction cups, tools, or tool holders (even if visible in images) are included in the scope of delivery! TECHNICAL DETAILS Console clamping table "K": 12 adjustable consoles for holding vacuum cups with longitudinal and lateral stops, 4-fold occupancy - Max. workpiece length (single occupancy): 5,800 mm - Max. workpiece length (pendulum mode): 2,200 mm - Max. workpiece width: 1,200 mm - Max. workpiece thickness (using standard 100mm-high cups) with edge: 60 mm (if extraction hood is in position 1) - Max. workpiece thickness (using standard 100mm-high cups) without edge: 60 mm - Max. workpiece thickness (using standard 100mm-high cups) without edge: 120 mm (if extraction hood is in position 2) Support equipment - Drilling head: 17 vertical spindles - 2x main spindle 12 kW, water-cooled, for HSK (speed 18,000 rpm with C-axis and 12-position carousel tool changer) - Separate Y-axis for second main spindle and interface for aggregates with integrated pneumatic and electrical connections - Electronic supply and swivel drive - C-axis: swivel range without limitation Edge banding unit, 360°, for insertion into right main spindle - Max. edge height: 65 mm - Pickup station right, for depositing edge banding modules - Pre-cutting station and 3-position roller magazine Adapter units - Combination flush-/radius trimming and finishing unit (profile scraper knife) - Saw and crosscutting unit - 4-spindle drilling/milling unit (crosshead) - Blow-off nozzle for workpiece edge Nwsdpfx Acjyic Tus Asl MACHINE DETAILS - Control: HOMATIC control PC 83 with Windows interface (NT 4.0) EQUIPMENT - WOODWOP programming system, version 5.0 - Network connection - Laser positioning aid - Chip conveyor - Safety: pressure-sensitive floor mats at front, side safety cage; rear: wall installation Note: A loading aid can be provided for a deposit of €5,000. Upon return, the deposit will be refunded minus 10%.

Condition: used, used, great condition, little usedMake HettichType Blue Max mini PMPneumatic drill feedStorage location 97447 Gerolzhofen, freely loaded, unpackedHandover in the current condition as seen,without guarantee and guarantee Nwodpfx Acjvwf Dqo Ajl

Condition: new, Year of construction: 2026, LUFT 700 VSD+PM COMPACT Screw Compressor with Refrigerated Air Dryer The LUFT 700 VSD+PM COMPACT screw compressor with an integrated refrigerated compressed air dryer combines state-of-the-art pneumatic technology with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. Are you looking for a professional solution for powering pneumatic tools in a workshop, paint shop or small production line? The CORMAK LUFT 700 VSD+PM COMPACT screw compressor with refrigerated air dryer is an excellent choice. With a 5.5 kW motor and an impressive actual output of up to 690 l/min, it provides a continuous supply of compressed air required for efficient operation of impact wrenches, blow guns and painting tools. It can also be used as a compressor for sandblasting applications. This model has been designed for continuous-duty operation, making it ideal for demanding applications such as tyre service centres, large automotive workshops and manufacturing facilities. Investing in a CORMAK screw compressor means a significant improvement in working comfort – say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The screw compressor is also equipped with an integrated refrigerated compressed air dryer, which provides dry and clean air while protecting the compressed air system against corrosion and damage. The LUFT 700 VSD+PM COMPACT oil-injected screw compressor with refrigerated air dryer features a traditional belt drive, resulting in easier maintenance and lower servicing costs. Belt replacement is simpler and less expensive than repairing a direct-drive system, and a worn belt can be easily replaced with a new one. Extended Component Service Life The belt drive also contributes to longer component life. The absence of a rigid connection between the motor and the compressor's working components reduces mechanical wear and stress, helping to extend the service life of the system. The maximum operating pressure generated by this screw compressor is 10 bar. Full control over the machine's operating parameters is provided by an intuitive MAM electronic control panel, giving the operator access to key machine information and greater flexibility and control over the production process. Key Parameters ✅ Pressure: up to 10 bar ✅ Air output: up to 690 l/min ✅ Motor power: 5.5 kW Technical Specifications Parameter Specification Motor power 5.5 kW / 7.5 HP Voltage 400 V / 50 Hz Output at 0–6 bar Average 690 l/min Nsdpfx Ajybvkajc Aowl Output at 6 bar 690 l/min Output at 8 bar 650 l/min Output at 10 bar 650 l/min Outlet connection diameter (G) 1/2" Dimensions 1350 × 600 × 850 mm Weight 200 kg

Condition: new, Year of construction: 2026, CORMAK LUFT 700 VSD+PM Screw Compressor – Compact Power for Your Business – ENERGY SAVER Are you looking for a professional solution to power pneumatic tools in a workshop, paint shop, or a small production line? The CORMAK LUFT 700 VSD+PM screw compressor is the perfect choice. With a power output of 5.5 kW and an impressive actual air delivery of up to 690 l/min, it ensures a constant supply of compressed air, essential for the efficient operation of impact wrenches, blow guns, and spray painting tools. This model, powered by 400V, is designed for continuous operation, making it ideal for demanding applications such as small workshops, tire service centers, and craft businesses. Investing in a CORMAK screw compressor is a step toward significantly improved working comfort—say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The LUFT 700 VSD+PM features a reliable and robust direct drive system that eliminates vibrations and the need for belt transmission adjustments. This proven solution guarantees stable performance and long service life by ensuring direct power transfer from the motor to the screw module. The maximum pressure generated by this screw compressor is 10 bar. Full control over the operating parameters is provided by an intuitive MAM-series electronic control panel, giving you access to key compressor information and increasing flexibility and control over your processes. Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 690 l/min Air delivery at 6 bar: 690 l/min Air delivery at 8 bar: 650 l/min Air delivery at 10 bar: 650 l/min Outlet connection (G): 1/2" Nwjdsycctqepfx Ac Ael Dimensions: 800 × 520 × 740 mm Weight: 100 kg

Condition: good (used), Year of construction: 2001, functionality: fully functional, Used machine MAKA PM 270 R 5-axis CNC machining center for machining wood, plastic and aluminum. Machine in mobile portal design, with rack and pinion drive. Year of manufacture: 2001 Technical data: CNC control BWO 900C, for 5-axis machining. Integrated PC with 1MB memory and 3.5" floppy disk drive. Mobile control panel stand. Working areas in 5-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,600 mm X-axis: 1,350 mm Z-axis: 420 mm / with 180 mm fixture height (vacuum suction cup) Working areas in 3-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 6,000 mm X-axis: 1,350 mm Z-axis: 420 mm / with 180 mm fixture height (vacuum suction cup) A-axis 540° (rotation axis) B-axis 200° (swivel axis +/- 100°) Nwjdsvmywqspfx Ac Ajl Rapid traverse speed X/Y axis 45 m/min. Z axis 24 m/min. A/B axis 10 m/min. Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, power max. 12.5 kW, speed continuously adjustable up to 17,000 rpm, milling spindle water-cooled. - 1 NC height-adjustable chip collection system with slat curtain. Tool magazine: - ISO 40 tool interface for automatic tool change system. - 1 chain tool magazine with 32 spaces for tools up to D = 90 mm, with sorted storage up to max. 160 mm. (Three spaces are required for this). Machine table: - 10 support tubes on linear guides with pneumatic release device for quick positioning. - 2 control circuits for "lifting/lowering" stops - 2 control circuits for "lifting/lowering" slide rail - 2 control circuits for "clamping/loosening" pneumatics - 2 vacuum control circuits with button for clamping and automatic reset through CNC programming. - 1 chip conveyor belt integrated in the base frame, for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Tools: Tools are not included in the scope of delivery! The system can be delivered including various tool holders upon request. We would be happy to make you a separate offer for this. Vacuum supply: - 1 vacuum pump, approx. 140 m³ suction power, including a tank with a capacity of 250 liters for quick vacuum build-up. - 10 vacuum supports with various suction plates. - Various clamping devices for posts and curved parts. - Raise/lower stops to position components. Other: - Automatic central lubrication. - Control cabinet with air conditioning unit. - Projection laser Work safety: - Mobile protective cabin with safety bumpers on the operator side.

Condition: new, Year of construction: 2026, CORMAK LUFT 700 VSD+PM Compact Screw Compressor with Dryer – Compact Package for Demanding Applications – ENERGY SAVER SET INCLUDES: LUFT 700 VSD+PM COMPACT screw compressor with dryer Horizontal compressed air tank – 500 L Key Features of the Energy Saver Series 1. Permanent Magnet (PM) Motor Technology Most compressors in the Energy Saver series use permanent magnet motors. Compared to standard induction motors, they: Achieve efficiency levels of IE4 or even IE5 Maintain high performance even at very low speeds (standard motors lose efficiency outside their nominal range) Are smaller, lighter, and generate less heat 2. Advanced VSD Inverter Control The heart of the Energy Saver line is the frequency inverter (VSD). Adaptation to demand: The compressor does not operate on an "all-or-nothing" principle (load/unload). If your system requires only 30% capacity, the compressor reduces speed, consuming proportionally less energy. Eliminates idle running: Traditional compressors often run for several minutes after the tank is full, consuming about 25–30% of nominal power without producing air. Energy Saver models nearly eliminate this wasteful process. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current surges during startup, which: Saves the electrical installation in the facility Allows frequent start/stop cycles without overheating the windings 4. Real Energy Savings In practice, the Energy Saver series can reduce electricity costs by 30% to 50% compared to traditional fixed-speed compressors. Nwjdpfeycg Ryjx Ac Ajl Additionally, the system maintains very stable pressure in the network (with accuracy up to 0.1 bar), which is crucial for precision devices such as laser cutters. Longer service life: No sudden pressure and temperature spikes prolong the screw stage life. Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection (G): 1/2" Dimensions: 1840 × 640 × 1470 mm Weight: 320 kg

Condition: new, Year of construction: 2026, CORMAK LUFT 1500 VSD+PM Compact screw compressor with dryer – compact set for demanding applications – ENERGY SAVER SET INCLUDES: LUFT 1500 VSD+PM COMPACT screw compressor with dryer. Horizontal compressed air receiver 500 L. Key features that distinguish these models: 1. Permanent Magnet (PM) Motor Technology Most Energy Saver compressors use Permanent Magnet motors. Unlike standard induction motors: They achieve efficiency levels compliant with IE4 or even IE5 standards. They maintain high efficiency even at very low speeds, where standard motors lose performance. They are smaller, lighter and generate less heat. 2. Advanced Inverter Control (VSD) The core of the Energy Saver line is a frequency converter (inverter). Demand matching: The compressor does not operate on an “all-or-nothing” basis. If your system requires only 30% capacity, it reduces speed accordingly, consuming proportionally less energy. Elimination of idle operation: Conventional compressors often run unloaded for several minutes after filling the tank, consuming around 25–30% of rated power without producing air. Energy Saver models virtually eliminate this loss. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz, eliminating current surges at start-up, which: Protects the plant’s electrical installation. Allows frequent start-stops without overheating the windings. 4. Real Savings In practice, Energy Saver technology reduces electricity bills by 30% to 50% compared with fixed-speed compressors. It also maintains very stable network pressure (within 0.1 bar), essential for precision equipment such as laser cutters. Extended service life: Smooth pressure and temperature changes prolong screw element life. Technical Parameters Motor power 11 kW / 15 HP Voltage 400V / 50Hz Output 0–6 bar 1620 L/min Output at 6 bar 1580 L/min Output at 8 bar 1350 L/min Output at 10 bar 1230 L/min Outlet connection (G) 1" Dimensions 1600 × 740 × 1750 mm Weight 500 kg Nedpoychbasfx Ac Ajwl

Condition: new, Year of construction: 2026, Set including the LUFT 700 VSD+PM screw compressor and a vertical 200-liter compressed air tank with fittings. The LUFT series screw compressor from the Polish brand CORMAK represents state-of-the-art pneumatic solutions combined with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and robust design, and high efficiency guarantee reliable and trouble-free operation. Compressor Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400 V / 50 Hz Air delivery at 0–6 bar: approx. 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection (G): 1/2" Dimensions: 800 × 520 × 740 mm Weight: 100 kg 200 L Pressure Tank – Technical Specifications Weight: 80 kg Number of connections: 6 Connection sizes: 1/2", 1", 2" Overall dimensions: 166.5 × 45 cm Tank capacity: 200 L Working pressure: 11 bar Wall thickness: 4 mm Diameter: Ø 450 mm Height: 1665 mm Important Notice! Njdpeyguirjfx Ac Aswl The accessory set does not include a safety valve. A suitable safety valve must be purchased and installed separately by the user.

Condition: excellent (used), Year of construction: 2008, HYPERTURN 665 MCplus - B-PowerMill Multi-Axis CNC Turning Center with automatic tool changer, Y-axis and B-axis, for complete machining of turned-milled parts. Integrated spindle motors (ISM) on main and sub-spindle with thermocompensation system (liquid cooled). Drive power: Main spindle - 29 kW Sub-spindle - 22 kW Speed range: Main spindle 0-5000 rpm Sub-spindle 0-7000 rpm Spindle interface (DIN 55026): Main spindle KK 6 (bore 65 mm) Sub-spindle KK 6 Y-axis: travel range +/- 50 mm The Y-axis is designed so that the resulting cutting forces are distributed over two axes, providing extremely high rigidity for all machining operations. Nedexz Ab Rspfx Ac Aswl B-PowerMill: For machining inclined surfaces and bores, a motor-driven milling spindle with a 24-position tool magazine is integrated into the upper slide system. The swivel range of 210° is infinitely adjustable and can be interpolated. Preloaded roller guides in all linear axes, digital drive system, integrated spindle encoder, state-of-the-art SINUMERIK 840D control technology, includes: * Hollow clamping cylinder incl. draw tube * Part ejector and coolant supply through the sub-spindle * 12-position VDI 30 radial tool turret with directional logic for up to 12 driven tool stations Swivel speed adjustable with feed switch. Performance data: Max. 6.7 kW at 2650 rpm Constant torque 25 Nm Speed range 0-5000 rpm - C-axis for main and sub-spindle - TRANSMIT software for easy C-axis programming * Parts catcher for finished parts * Sinumerik 840D * Chip conveyor with a programmable discharge height of 1200 mm (hinged belt type) * Coolant system integrated in the chip conveyor: 1 high-pressure pump with 14 bar 1 high-pressure pump with 14 bar incl. 20 µm fine filter 2 flushing pumps with 3.7 bar * Control cabinet air conditioning unit * Electrostatic oil mist separator * Hydraulic unit * Machine lamp * Interface for foot switch * Documentation Included: - Handwheel - PC keyboard - Network preparation - Tool monitoring - Swing-out window - Cleaning gun - Signal lamp Year of manufacture: 2008 Machine No.: R7AW0401

Condition: used, power: 78 kW (106.05 HP), first registration: 12/2025, fuel type: gasoline, axle configuration: 4x2, color: white, gearing type: mechanical, suspension: steel, Leaf spring suspension, UNIQUE UNIT - ZERO-MILE VEHICLE - REGISTERED 12/17/2025 - SHORT RANGE LPG (15L) - DUAL REAR WHEEL - WHEELBASE 3250mm - OPTIMIZED PAYLOAD 550 Kg - WHITE COLOR - REAR TIPPER BODY: 2300x1800mm - PM 2821 CRANE - TOP EQUIPMENT: DAB radio, Manual air conditioning, Electrically heated, folding, and adjustable exterior mirrors, Passenger airbag, Body-colored front bumper, Fog lights - VEHICLE AVAILABLE SUBJECT TO PRIOR SALE - TIPPER BODY FEATURES: - Chiarvesio-built rear tipper body, 2300x1800 mm (external dimensions) - L-shaped sideboards, 400 mm high, with 180-degree lateral opening, and rear opening from below/above - 30/10 sheet metal floor - 01 front pole holder - 01 galvanized 400mm tool box - Fenders - 1+1 winches - rear light grilles CRANE FEATURES: - model PM 2821 - 02 manually extendable stabilizers - 01 hydraulic extension - 02 additional actuators - bilateral 6-element controls - 01 swivel hook - 200 rotation buffers (the crane does not operate above the cab) Njdezf Sbuepfx Ac Aswl

Condition: used, mileage: 147,000 km, power: 66 kW (89.73 HP), first registration: 03/2006, fuel type: diesel, color: white, gearing type: mechanical, number of seats: 3, loading space length: 330 mm, Year of construction: 2006, Equipment: had accident, power assisted steering, The vehicle is in good condition but is not operational as the injection pump needs to be replaced. The vehicle is sold as seen, in its current state. Equipped with a rigid box body (removal van) and roof rack. VAT at 22% is excluded. Transfer of ownership costs excluded. Nsdpfey A T Rbex Ac Aswl Payload: 900 kg Body length: 3.3 m For information, contact via WhatsApp.

Condition: excellent (used), Year of construction: 2006, We sell the Mambranpress for kitchen doors, doors, or door frames, etc. Nwjdszmnyiopfx Ac Aol Producer ORMA Macchine, Model: PM Air System 25/14 Year 2006. Area 2500 x 1400mm. / 1 Table PIN system for edge binding. Possible to see at work. Documentation included

Condition: new, Year of construction: 2026, The CORMAK LUFT 2000 VSD+PM is an excellent choice for truck service workshops, tire service centers, and small manufacturing facilities. Despite its compact dimensions, it delivers an impressive 2,000 L/min actual air output, allowing multiple pneumatic tools to operate simultaneously. Its exceptionally low 74 dB noise level provides a much quieter and more comfortable working environment than conventional piston compressors. Built with premium-quality components, the compressor is designed for continuous-duty industrial operation. Compact Power for Your Business Powered by a 15 kW motor and delivering up to 2,000 L/min, the compressor provides a continuous supply of high-pressure compressed air required for: High-torque impact wrenches Heavy-duty pneumatic tools Truck tire inflation Industrial production equipment Continuous workshop operations Operating on a 400 V / 50 Hz power supply, the unit is engineered for continuous operation, making it ideal for workshops, tire service centers, manufacturing facilities, and various industrial applications. By replacing a conventional piston compressor with the LUFT 2000 VSD+PM, users benefit from significantly quieter operation, greater efficiency, and improved workplace comfort. Reliable Direct Drive System The LUFT 2000 VSD+PM features a proven direct-drive transmission system, eliminating vibration and removing the need for belt adjustment or replacement. Direct power transmission from the motor to the airend ensures: Maximum mechanical efficiency Reduced maintenance requirements Smooth and reliable operation Extended service life Maximum Working Pressure – 13 Bar The compressor delivers a maximum operating pressure of 13 bar, making it suitable for demanding industrial applications requiring higher air pressure. Operation is managed through the intuitive MAM electronic controller, providing real-time monitoring of key operating parameters, maintenance scheduling, diagnostics, and complete control over compressor performance. VSD Inverter Technology The integrated Variable Speed Drive (VSD) inverter continuously adjusts the compressor motor speed according to the actual compressed air demand. Compared with fixed-speed compressors, VSD technology offers: Significant energy savings Reduced electricity consumption Stable system pressure Lower mechanical wear Nodpfx Acezmgc As Aswl Longer compressor lifetime Lower operating costs Because electric power represents up to 80% of the total lifetime operating cost of a compressor, VSD technology delivers a rapid return on investment. Premium Screw Airend High-performance CORMAK compressors such as the LUFT 2000 VSD+PM are equipped with technologically advanced screw airends that provide outstanding efficiency and long-term reliability. Technical Specifications Parameter Value Motor Power 15 kW / 20 HP Power Supply 400 V / 50 Hz Air Delivery (0–6 bar) 2,100 L/min Air Delivery at 6 bar 2,000 L/min Air Delivery at 8 bar 1,700 L/min Air Delivery at 10 bar 1,600 L/min Air Outlet Connection G 3/4" Dimensions (L × W × H) 1,080 × 750 × 1,000 mm Weight 400 kg

Condition: new, Year of construction: 2026, The presented model is an excellent choice for small workshops and manufacturing companies. Thanks to its high air delivery of 950 L/min in relation to its compact dimensions, it can efficiently power several pneumatic tools simultaneously. Its exceptionally low noise level of 68 dB ensures a comfortable working environment, even when the compressor is installed in the same room as operators. Built with premium-quality components, this compressor is designed for continuous operation and is perfectly suited for industrial applications. Energy Saver Series The Energy Saver line is an advanced range of screw compressors engineered to significantly reduce operating costs. Since energy consumption accounts for nearly 80% of the total cost of a compressed air system, these compressors have become the preferred choice for modern industrial facilities. Innovative Design Our compressors combine advanced engineering with European manufacturing precision. Their robust construction and high-quality components ensure reliable, long-lasting performance in demanding working conditions. Maximum Energy Efficiency Thanks to VSD (Variable Speed Drive) inverter technology and intelligent control algorithms, the LUFT 1000 VSD+PM automatically adjusts motor speed and energy consumption to the current compressed air demand. This results in substantial energy savings while maintaining maximum efficiency. Nwjdpfx Acjzmf Aus Ajl Reliable Direct Drive System The LUFT 1000 VSD+PM is equipped with a proven direct drive transmission, minimizing mechanical losses and reducing stress on both the airend and motor. This ensures high efficiency, lower maintenance requirements, and extended service life. Quiet Operation Designed with operator comfort in mind, CORMAK compressors feature highly effective sound insulation and vibration reduction systems, resulting in exceptionally quiet operation and a more comfortable workplace. Intelligent Electronic Controller The advanced MAM electronic controller provides intuitive operation and complete control over compressor performance. It enables continuous monitoring of operating parameters, maintenance scheduling, fault diagnostics, and protection of critical components. Flexible Configuration Every compressed air system has unique requirements. CORMAK compressors can be equipped with additional air treatment systems, allowing the machine to be configured to meet the specific needs of various industries. Dynamic Pressure Control Automatic pressure regulation ensures the compressor supplies exactly the amount of compressed air required at any given moment, maximizing energy efficiency while minimizing unnecessary power consumption. Sustainable Technology Our energy-efficient solutions help reduce operating costs while minimizing environmental impact, making CORMAK compressors both economical and environmentally responsible. Technical Specifications Parameter Value Motor Power 7.5 kW / 11 HP Power Supply 400 V / 50 Hz Air Delivery (0–6 bar) Average 990 L/min Air Delivery at 6 bar 990 L/min Air Delivery at 8 bar 950 L/min Air Delivery at 10 bar 950 L/min Air Outlet Connection G 1/2" Dimensions 900 × 600 × 1840 mm Weight 268 kg

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen Nedpfx Acjyrhtne Aewl 2595 € 12 mm 19 mm Weldon 0.4 kW 361 mm 238 mm 352 mm 145 kg 12 mm 36 mm 50 mm 70 mm 260 U/min 6 mm This special design battery-operated drilling machine equipped with permanent magnetic base is dedicated to operate in remote areas, where no power supply is available. The base includes very strong neodymium magnets and does not require any electricity to operate. PRO-36 PM Battery is equipped with LED monitoring system that generates signals in green and red colors to indicate the current status of the drill and provide safety information. The drill can be used with convex (min diameter - 80 mm) and concave (min diameter 1000 mm) materials. Up to 47 holes fi 20 mm in 10 mm thick plate can be made when PRO-36 PM Battery is equipped with CAS LiHD 10.0 Ah battery pack. Features and benefits: • LED interface flashes green when inadequate adhesion is detected due to e.g. gap or thin work piece • dual bars guide system ensures extraordinary stiffness and adjustment free operation • overload protection • tilt sensor stops the motor if machine breaks away • control panel is equipped with so called „vandal resistant” illuminated start/stop motor buttons. Standard shipping set: • Cordless Drilling Machine with coolant container • Plastic Box • Battery 4.0 Ah • Handle (3 pcs) • Safety strap • Allen wrench hex s=4 with handle • Operator’s Manual OPTIONS (PRICES ON REQUEST): Battery charger Pressure cooling system Vacuumpad Vacuumpump Compressed air ejector

Condition: like new (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 0104, 2 pieces Like new. Nodpfszlladsx Ac Aewl