Used Orma Npc-4-70 for sale (66,035)

Condition: excellent (used), Vötsch Model: VCS³ 7034-5 Vötsch Climate Test Chamber, Water-Cooled With temperature change rate of 5 K/min Dwedpfx Aajziyx No Hsb Specifications for temperature testing: Temperature range: -70°C to +180°C Temporal temperature deviation in the center of the usable space: ±0.1 K to ±0.5 K Spatial temperature deviation: ±0.5 K to ±2.0 K Temperature change rate: Heating: 6.8 K/min Cooling: 6.7 K/min Specifications for climate testing: Temperature range: +10°C to +95°C Temporal temperature deviation in the center of the usable space: ±0.1 K to ±0.3 K Spatial temperature deviation: ±0.5 K to ±1.0 K Temporal humidity deviation in the center of the usable space: ±1% to ±3% RH Humidity range: 10% to 98% RH (Extended climate range: 2°C/95% RH regulated for a maximum of 2 hours) Exterior dimensions (W x D x H): 870 x 1700 x 1775 mm Test chamber dimensions (W x D x H): 580 x 765 x 750 mm Test chamber volume: approx. 335 liters Side ports: 50 mm and 125 mm Operating data: LED strip 24 V, 6.8 W / 2 x halogen bulbs 24 V, 50 W Rated voltage: 3/N/PE AC 400 V ±10%, 50 Hz Rated power: 9 kW Rated current: 20 A Customer-side fuse: 63 A slow-blow Refrigerant: R404A / R-23 Weight approx. 570 kg For your security as a buyer, please note the following: The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant, if needed 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see image) (Technical data and information subject to change and errors!) Further questions can be answered by phone.

Condition: excellent (used), Type: VCS 7034-5 Climate Test Chamber Water-Cooled Test chamber volume: 335 liters Performance for temperature tests: Temperature range: -70 to +180°C Temperature deviation over time: ±0.1 to ±0.5 K Temperature deviation spatially: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 K Change rate: Cooling: 3.5 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3,000 W / at -20°C: 3,000 W Temperature calibration points: +23°C and +80°C Performance for climate tests: Temperature range: +10 to +95°C Temperature deviation over time: ±0.1 to ±0.3 K Temperature deviation spatially: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Humidity deviation over time: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climatic calibration points: +23°C / 50% RH and +95°C / 50% RH Test chamber dimensions: Width: 580 mm, Depth: 765 mm, Height: 750 mm External dimensions: Width: 870 mm, Depth: 1595 mm, Height: 1775 mm Feedthroughs: 1 x approx. 50 mm Ø, left side 2 x approx. 125 mm Ø, left side 1 x approx. 125 mm Ø, right side Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10 kW Dwodpfxozizl Dj Aa Heb Rated current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerant: R404A / R-23 For your security as a buyer, please note the following information: The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and errors!) If you have further questions, we are happy to answer them by phone.

Condition: used, Manufacturer : SPX APV Model: Rannie – R275 Q-70 5140 X Djdpex R A E Rsfx Aa Hswb Type : Piston homogenizer Pwer : 250 KW Max pressure : 300 Bars Max. capacity: 27,000 L/H Stainless steel casing with pre-insonization. Number of pistons: 5 Homogenizing stage / effect: 2 Floor support available, not visible on photos. Second identical unit available: Reference osertech # 12048

Condition: used, Small Drilling/Milling Machine ISERT ELECTRONIC Travel X: 350 mm Travel Y: 300 mm Travel Z: 70 mm Rotation: 8000 / 9500 / 13500 / 20500 / 24000 RPM The machine could be used for drilling printed circuit boards or other use. The machine was controlled through a PC that is no longer present. Possibility to use it in manual Equipped with: 1 Milling Machine KRESS Voltage: 220 V mono Dimensions (L x W x H): 950 x 700 x 700 mm Dsdpjzw Azcefx Aa Hjwb Weight: approx 60 KG

Condition: used, mileage: 472,000 km, power: 265 kW (360.30 HP), first registration: 02/1992, fuel type: diesel, overall weight: 32,000 kg, brakes: retarder, gearing type: mechanical, - Retarder - Manual transmission - Well-maintained - Cormach 87000 with 42-meter reach Suspension: Leaf suspension Djdpfxsyklrfe Aa Howb

Condition: used, Manufacturer : SPX APV Model: Rannie – R275 Q-70 5140 X Type : Piston homogenizer Pwer : 250 KW Max pressure : 300 Bars Max. capacity: 27,000 L/H Stainless steel casing with pre-insonization. Number of pistons: 5 Homogenizing stage / effect: 2 Floor support available, not visible on photos. Second identical unit available: Reference osertech # 12049   Dsdpsx R A E Dsfx Aa Hjwb

Condition: excellent (used), power: 265 kW (360.30 HP), first registration: 02/2019, fuel type: diesel, axle configuration: 6x4, wheelbase: 5,250 mm, fuel: diesel, fuel tank capacity: 500 l, brakes: engine braking, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 8,370 mm, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2019, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, power assisted steering, power mirror, trailer coupling, - Brake booster - Differential lock - High beam headlights - Low noise - Speed limiter Dwedpfszzn Hfjx Aa Hsb - Cab - Air suspension - Air-suspended seats - Air horn - Rotating beacon - Rear view camera - Sun visor - Power take-off (PTO) Technical information Number of cylinders: 6 Engine displacement: 10,518 cc Axle configuration Maximum front axle load: 9000 kg Rear axle 1: Max. axle load: 11,500 kg Rear axle 2: Lift axle; Max. axle load: 7,500 kg; Steerable Weights Unladen weight: 15,975 kg Payload: 12,025 kg GVW: 28,000 kg Functional Crane: PALFINGER-EPSILON Q 170 EASYFOLD, behind the cab Body manufacturer: KIPPER with flaps and rear doors Maintenance, history and condition APK (technical inspection): valid until 02/2027 Technical condition: very good Optical condition: very good Identification License plate: 25-BLZ-3 MAN TGS 26.360 6x4H-4 BL TIPPER + PALFINGER EPSILON Q170 EASYFOLD + BAKKER GRAB Very nice and fully equipped MAN TGS 26.360 6x4H-4 BL with tipper body and Palfinger Epsilon Q170 EasyFold loading crane mounted behind the cab, including Bakker grab. An extremely versatile and robust combination, ideally suited for earthmoving, road construction, recycling, gardening and landscaping, municipal work, as well as the transport and handling of various materials. The vehicle comes from a single owner, is in very good condition and has only 190,068 km on the odometer. VEHICLE DATA * Manufacturer: MAN * Type: TGS 26.360 6x4H-4 BL * Axle configuration: 6x4H-4 * License plate: 25-BLZ-3 * First registration: 20.02.2019 * Mileage: 190,068 km * Engine power: 265 kW / 361 hp * Displacement: 10,518 cm³ * Fuel: Diesel * Emission standard: Euro 6 * Weight variant: 28,000 kg * Automatic transmission * Day cab * Air conditioning * Multimedia/audio system * DIN mounting plate on the front of the vehicle * Rotating beacons on the cab * Stainless steel toolboxes * From a single owner * Dutch vehicle * Valid technical inspection / APK until 02/2027 TIPPER BODY The vehicle is equipped with a robust tipper body for professional and intensive use. Equipment includes: * Hydraulic tipping function * Aluminum cover flaps * Rear doors * Hydraulically operated side panel * Robust and professional construction * Ideal for bulk goods, sand, earth, gravel, construction debris, green waste and other materials The hydraulic side panel enables quick and efficient loading and unloading, making this combination particularly versatile. PALFINGER EPSILON LOADING CRANE Located directly behind the cab is a: PALFINGER EPSILON Q170 EASYFOLD The Epsilon Q170 is a robust and powerful loading crane, designed for intensive professional loading and handling operations. The crane is equipped with: * Palfinger Epsilon Q170 * EasyFold system * Mounting directly behind the cab * Professional hydraulic system...

Condition: used, Bitzer compressor rack chiller Dwodpfoy Sk Ntsx Aa Hsb -Type: 2 x HSK 6461-60, 2 x HSK 7451-70 -Volume: 2 x 165 m³/h, 2 x 192 m³/h -Cooling capacity: 620 kW at 0°C/40°C, 520 kW at -5°C/40°C, 420 kW at -10°C/40°C -Dimensions: 4300 x 1200 x 1500 mm -Stock quantity: 1

Condition: good (used), functionality: fully functional, Year of construction: 1995, load capacity: 70,000 kg, machine/vehicle number: 65068, Equipment: cabin, crane, low noise, Product Description Used truck mounted Terrian crane Manufactured by Tadano faun Model ATF70-4 Crane has a maximum Loading capacity of 70 ton Machine sold as its condition Dedpfxsul Uvus Aa Hswb Operates on Diesel Engine More information Please contact VIJAY JPN Industrial Trading Pte Ltd 13A pandan crescent, Singapore 128478

Condition: good (used), MIG/MAG hose package extension, intermediate hose package -Welding cable: extension / connection cable water-cooled -Length: 4.35 m Dwodpfx Asucmncja Hjb -Version: Dinse plug, gas hose, control cable -Connector: 4-pin -Transport dimensions: 470/460/H100 mm -Weight: 6.0 kg

Condition: new, Year of construction: 2026, The RD700 VARIO is built on a solid column structure that ensures stability and vibration resistance. The radial arm enables precise head positioning from 300 to 700 mm relative to the column, while a quill stroke of 130 mm allows comfortable drilling in one setup. Key Components Spindle: Morse taper MT3 with drawbar, stepless speed control, maximum drilling capacity 32 mm. Feed system: Automatic spindle feed with three ranges, integrated with tapping mode. Main motor: 1.5 kW, 400 V, designed for continuous operation. Dwedpfx Aeyccn Uea Heb Table and base plate: 250×250×250 mm cube table and 900×620 mm work plate with T-slots. Precision and Performance With stepless speed regulation and digital indicators, the RD700 VARIO guarantees high machining accuracy and repeatability. The automatic feed and tapping mode reduce cycle times, while the rigid construction minimises vibrations and extends tool life. Applications The CORMAK RD700 VARIO radial drilling machine is ideal for mechanical workshops, toolrooms, production plants, and maintenance departments. It is perfect for machining steel elements, welded structures, machine parts, and industrial components. Standard Equipment Cube table Base Drill chuck 3–16 mm / B18 Mandrel MT3 / B18 Reducing sleeve MK3 / MK2 Cooling system Tapping mode Digital spindle speed indicator Digital drilling depth indicator Adjustable height guard Basic tool set Safety guards User manual CE certification Technical Data *The price quoted is for the machine itself, excluding optional/additional equipment, installation, transport and training— please contact our consultant for more details. Parameter Value Maximum drilling capacity 32 mm Maximum tapping capacity M22 Spindle taper MK3 Minimum spindle speed 75 rpm Maximum spindle speed 2,500 rpm Speed change Stepless (75–438 / 438–2,500) Automatic feed range (3) 0.08 / 0.14 / 0.22 mm/rev Spindle–column distance 300–700 mm Spindle–table distance 0–430 mm Spindle–base plate distance 175–680 mm Vertical arm travel 505 mm Horizontal head travel 400 mm Quill stroke 130 mm Column diameter 150 mm Cube table size 250 × 250 × 250 mm Base plate work area 900 × 620 mm Motor power 1.5 kW Power supply 400 V Width 1,220 mm Depth 640 mm Height 1,750 mm Weight approx. 722 kg

Condition: new, Year of construction: 2026, CORMAK LUFT 700 VSD+PM Screw Compressor – Compact Power for Your Business – ENERGY SAVER Are you looking for a professional solution to power pneumatic tools in a workshop, paint shop, or a small production line? The CORMAK LUFT 700 VSD+PM screw compressor is the perfect choice. With a power output of 5.5 kW and an impressive actual air delivery of up to 690 l/min, it ensures a constant supply of compressed air, essential for the efficient operation of impact wrenches, blow guns, and spray painting tools. This model, powered by 400V, is designed for continuous operation, making it ideal for demanding applications such as small workshops, tire service centers, and craft businesses. Investing in a CORMAK screw compressor is a step toward significantly improved working comfort—say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The LUFT 700 VSD+PM features a reliable and robust direct drive system that eliminates vibrations and the need for belt transmission adjustments. This proven solution guarantees stable performance and long service life by ensuring direct power transfer from the motor to the screw module. The maximum pressure generated by this screw compressor is 10 bar. Full control over the operating parameters is provided by an intuitive MAM-series electronic control panel, giving you access to key compressor information and increasing flexibility and control over your processes. Technical Specifications Dwedpfx Aeycctqea Hob Motor power: 5.5 kW / 7.5 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 690 l/min Air delivery at 6 bar: 690 l/min Air delivery at 8 bar: 650 l/min Air delivery at 10 bar: 650 l/min Outlet connection (G): 1/2" Dimensions: 800 × 520 × 740 mm Weight: 100 kg

Condition: new, Year of construction: 2026, CORMAK PT260 400V Planer Thicknesser – Compact Professional Woodworking Machine The CORMAK PT260 400V planer thicknesser is a modern, compact workshop-class machine designed for precise processing of sawn timber. This functional combination of a surface planer and thickness planer offers high efficiency, solid construction, and versatility when working with wood materials. Thanks to its robust design, ergonomic operation, and reliable performance, this woodworking machine is an excellent solution for carpentry workshops, technical laboratories, and professional home workshops. Main advantages of the machine S6: 2.6 kW motor – high torque reserve enables efficient machining of hardwood and long-term operation without overloads. Stable 170 kg construction – cast iron precision-ground tables and rubber vibration-damping feet ensure safe operation, reduced vibration, and high-quality cutting results. Quick mode change system – simple switching between surface planer and thickness planer functions improves efficiency during varied woodworking tasks. Three-knife cutter block – Ø75 mm shaft rotating at 4000 rpm provides a smooth surface finish and minimizes the need for additional sanding after planing. Wide adjustment range – smooth adjustment of the table and fence allows precise adaptation to different types and sizes of material. Construction and technology The CORMAK PT260 400V planer thicknesser is manufactured using high-quality steel and cast iron components. The working tables (1100 × 250 mm and 600 × 248 mm) are milled and ground, ensuring a perfectly flat surface for accurate material guidance. The aluminium fence measuring 700 × 150 mm with adjustable angle from 90° to 45° allows easy machining of bevelled edges and angled surfaces. The thicknessing table is centrally guided on a rigid column, and height adjustment is carried out using a precise handwheel with a graduated scale, ensuring accurate and repeatable settings. Precision and working efficiency The CORMAK PT260 400V provides a maximum cutting depth of up to 3 mm, allowing effective removal of excess material while maintaining precise dimensional control. The 6 m/min feed speed ensures efficient operation while maintaining excellent surface quality. The Ø100 mm dust extraction outlet enables effective connection to a chip extraction system, improving operator comfort and extending the service life of cutting tools. Standard equipment Ø75 mm cutter shaft with 3 knives 250 × 30 × 3 mm Surface planer table: 1100 × 250 mm Thicknessing table: 600 × 248 mm Dwjdpowt Axpjfx Aa Heb Adjustable aluminium fence 700 × 150 mm (90°–45°) Rubber vibration-damping feet Ø100 mm dust extraction outlet Operating manual (DTR) CE Declaration of Conformity Technical specifications Parameter Specification Cutter block diameter 75 mm Cutter block speed 4000 rpm Dust extraction outlet diameter 100 mm Fence tilt angle 90°–45° Number of knives 3 Knife dimensions 250 × 30 × 3 mm Surface planer table dimensions 1100 × 250 mm Thicknessing table dimensions 600 × 248 mm Maximum planing width 250 mm Maximum planing depth 5 mm Maximum thicknessing cutting depth 3 mm Maximum thicknessing height 180 mm Thicknessing feed speed 6 m/min Fence dimensions 700 × 150 mm Machine dimensions (L × W) 1100 × 250 mm Weight 170 kg Motor power S1/S6 S1: 2.0 kW / S6: 2.6 kW Power supply 400 V Operating manual (DTR) Yes CE Declaration Yes

Condition: new, Year of construction: 2026, CORMAK TORNADO 460x2000 is a robust and highly accurate universal lathe designed for professional metalworking in industrial environments. With a 2,000 mm distance between centers and an 82 mm spindle bore, it is an ideal solution for machining long shafts, sleeves, pipes, and other large workpieces. The machine combines precision guideways, a rigid cast iron construction, and comprehensive standard equipment to deliver outstanding performance across a wide range of machining operations. Key Features Versatile machining capabilities – external turning, internal turning, taper turning, metric, imperial, module and DP threading, drilling, boring, and polishing. 2,000 mm distance between centers – ideal for machining long shafts, tubes, and cylindrical components. 300 mm wide cast iron bed – hardened and precision-ground for excellent rigidity, vibration damping, and long service life. 2-axis Digital Readout (DRO) – equipped with optical scales for accurate positioning and improved machining precision. 82 mm spindle bore – accommodates large-diameter and long workpieces. Rapid traverse joystick – significantly reduces carriage travel time and improves productivity. Direct thread selection – thread parameters can be changed without replacing change gears. Thread chasing dial – enables accurate and repeatable thread cutting. Removable gap bed – allows machining of workpieces up to 690 mm in diameter. Construction and Technology The CORMAK TORNADO 460x2000 is designed for precision and durability under demanding production conditions. The ergonomic control panel and precision spindle assembly provide smooth operation across a 25–2000 RPM speed range. The headstock transmission features hardened and precision-ground gears, ensuring quiet operation, long service life, and reliable power transmission. The heavy-duty cast iron bed offers exceptional rigidity and resistance to deformation, maintaining machining accuracy over years of industrial use. An integrated coolant system and LED work light enhance operator comfort and improve visibility during machining. Standard Equipment 250 mm 3-jaw chuck with internal and external jaws 320 mm 4-jaw chuck with internal and external jaws 2-axis Digital Readout (DRO) with optical scales Fixed steady rest Follow rest MT4 dead center MT7/MT4 spindle reduction sleeve Change gears Coolant system Work light Oil can Chuck key and tool post wrench Complete service tool kit CE-compliant safety guards User manual CE Declaration of Conformity Technical Specifications Specification Value Swing over bed Ø460 mm Swing over cross slide Ø274 mm Swing over gap Ø690 mm × 240 mm Center height 230 mm Distance between centers 2000 mm Bed width 300 mm Maximum tool size 25 × 25 mm Cross slide travel 290 mm Top slide travel 120 mm Spindle bore Ø82 mm Spindle nose D1-8 Spindle taper Ø90 (1:20) Number of spindle speeds 12 Spindle speed range 25–2000 RPM Lead screw Ø35 mm × 6 mm Imperial thread range 2–112 TPI (60 pitches) Metric thread range 0.1–14 mm (41 pitches) Diametral pitch threads 4–112 DP (50 pitches) Module thread range 0.1–7 MP (34 pitches) Longitudinal feed rates 0.054–3.04 mm/rev (42 feeds) Cross feed rates 0.014–0.784 mm/rev (42 feeds) Dwsdpsv E Eiiofx Aa Hob Tailstock quill travel 120 mm Tailstock quill diameter Ø60 mm Tailstock taper MT4 Main motor 5.5 kW Coolant pump motor 0.09 kW Machine dimensions (L × W × H) 3220 × 1040 × 1340 mm Weight 2785 kg

Condition: used, Year of construction: 2006, Girsac net packing machine. Packing weight from 0.5 to 4 kg Djdpfx Aasx Evu Us Hswb

Condition: new, Year of construction: 2026, CORMAK MM2315Q 400V Wood Edge Sander The CORMAK MM2315Q 400V is a compact yet highly versatile edge sander designed for intensive, multi-purpose use in woodworking shops and manufacturing facilities. Featuring a robust construction, the ability to sand both straight and curved workpieces, and operation in both vertical and horizontal positions, the MM2315Q is a reliable solution for professional wood processing applications. Key Features Versatile operation – suitable for sanding both straight edges and curved workpieces thanks to the additional auxiliary table. Quick belt replacement – the lever-operated system allows fast, tool-free sanding belt changes, significantly reducing machine downtime. Flexible applications – the adjustable sanding unit can be positioned for both horizontal and vertical operation, expanding the range of machining possibilities. Precision and control – both the main worktable and the auxiliary contour sanding table feature height adjustment, allowing precise setup according to the workpiece dimensions. Stable and durable construction – the rigid steel frame minimizes vibration, ensuring consistent sanding pressure and repeatable results. Compact footprint – despite its wide range of capabilities, the machine occupies minimal floor space, making it ideal for workshops with limited working areas. Construction and Technology The CORMAK MM2315Q edge sander is built on a heavy-duty steel frame, providing exceptional rigidity and resistance to deformation under load. The 1.1 kW three-phase 400 V motor delivers stable belt speed of 840 m/min, ensuring efficient and consistent material removal. The sanding unit features an adjustable sanding angle from 0° to 45°, enabling precise edge and end-grain sanding at various angles, making it ideal for finishing operations and machining irregularly shaped components. The precision belt tensioning system maintains optimal belt tension, extending abrasive belt life while ensuring smooth and stable operation. Precision and Performance The large 790 × 221 mm worktable and a maximum sanding length of 790 mm allow accurate machining of large workpieces. The height-adjustable worktable and the additional 514 × 221 mm auxiliary contour sanding table provide excellent support and precise guidance, even when working with complex shapes. Dwsdpevuggzefx Aa Hjb Standard Equipment Auxiliary table for sanding curved workpieces Quick sanding belt replacement mechanism Precision belt tensioning system Adjustable sanding unit for horizontal and vertical operation Integrated Ø100 mm dust extraction port for connection to a dust collection system Operating manual (Polish) CE Declaration of Conformity Technical Specifications Specification Value Sanding belt size 2010 × 152 mm Worktable size 790 × 221 mm Table height 810 mm Stand height 600 mm Auxiliary contour sanding table size 514 × 221 mm Maximum sanding length 790 mm Dust extraction port diameter 100 mm Edge and end-grain sanding angle 0–45° Belt speed 840 m/min Motor power S1: 1.1 kW / S6: 1.5 kW Power supply 400 V Weight 90 kg Warranty 12 months Operating manual Yes CE Declaration Yes

Condition: new, Year of construction: 2026, CORMAK RGE36PWx1700 Electric Tapping Machine The CORMAK RGE36PWx1700 electric tapping machine is an advanced thread-cutting device designed for both large production facilities and smaller workshops. This tapping machine significantly reduces thread machining time, increasing work efficiency and improving the precision of manufactured threads. It has been developed to provide high reliability, ease of operation, and versatility across a wide range of industrial applications. Main advantages of the CORMAK RGE36PWx1700 Electric Tapping Machine High precision and fast tapping: Thanks to the powerful servo drive and tapping arm, the machine ensures accurate thread cutting in a short time, which is essential for serial production. Easy operation: The machine is equipped with a touchscreen control panel available in Polish and English, allowing simple adjustment of tapping parameters such as spindle speed, tapping direction, and thread depth. High flexibility: The tapping arm enables thread cutting at various angles, while the rotating motor assembly allows precise positioning of the machine for different applications. Efficient cooling system: The micro-spray lubrication system cools the tools with minimal lubricant consumption, extending tool life and reducing material waste. Comprehensive equipment: The tapping machine includes a chip blow-off system, improving visibility of the workpiece and increasing overall work efficiency. Design and Technology of the CORMAK RGE36PWx1700 Tapping Machine The CORMAK RGE36PWx1700 features a robust construction designed for efficient and precise tapping in various industrial environments. The machine is powered by a servo drive, ensuring reliable operation and accurate control of tapping parameters. Thanks to the tapping arm and rotating motor assembly, the machine can perform threading in a wide range of materials, including steel, stainless steel, aluminium, and non-ferrous metals. Dwsdpfx Aasvugrqo Hjb The tapping arm is equipped with a quick-change tool holder, allowing fast and convenient installation of taps. Adjustable overload clutches integrated into the tap holders provide additional tool protection during operation. This system also allows precise adjustment of torque settings, ensuring accurate and repeatable tapping results. Standard Equipment of the CORMAK RGE36PWx1700 Tapping Machine Touchscreen control panel: Enables easy programming of tapping parameters such as spindle speed, tapping direction, and thread depth. Rotating tapping arm: Allows thread cutting at any required angle. Tap holders with overload clutches: Protect the machine against excessive loads and ensure long-term durability. Micro-spray lubrication system: Provides continuous tool cooling with minimal coolant consumption. Chip blow-off system: Removes chips and improves visibility during tapping operations. Technical Specifications of the CORMAK RGE36PWx1700 Tapping Machine Parameter Value Power 2 kW Power supply 230 V Weight 56 kg Maximum arm reach 1700 mm Maximum spindle speed 125 rpm

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK FM300 Dust Collector – High-Performance Extraction System for Professional Woodworking The CORMAK FM300 is a high-performance dust collector designed for intensive use in woodworking shops, furniture manufacturing facilities, and industrial production environments. Equipped with a 1.5 kW three-phase motor, a dynamically balanced steel impeller, and a robust steel frame, the unit delivers reliable extraction of sawdust, wood chips, and fine dust with an impressive airflow capacity of 2,530 m³/h. It is an ideal solution for professionals seeking durability, efficiency, and dependable performance. Key advantages High extraction capacity of 2,530 m³/h – suitable for operating multiple woodworking machines simultaneously. 1.5 kW three-phase motor (400 V) – delivers consistent power and reliable continuous-duty performance. Dynamically balanced steel impeller – ensures smooth, quiet operation with minimal vibration and extended service life. Large 150 L collection bags – reduce downtime by requiring less frequent emptying. Y-shaped inlet – configurable as 2 × Ø100 mm or 1 × Ø130 mm for flexible machine connections. Mobile steel base with four caster wheels – allows easy movement between workstations. Quick-release fabric collection bags – simplify maintenance and improve operator convenience. Construction and technology The CORMAK FM300 features a heavy-duty welded steel frame mounted on swivel casters, providing both stability and mobility. At the heart of the system is a high-efficiency centrifugal fan equipped with a dynamically balanced steel impeller, delivering powerful suction with low noise and vibration levels. The versatile Y-shaped inlet allows fast switching between single- and dual-hose configurations, making the unit adaptable to a wide variety of workshop layouts. Precision and performance Operating at 2,850 rpm, the FM300 generates strong airflow capable of efficiently extracting both fine dust and heavier wood chips produced by sawing, planing, routing, and sanding operations. The generous bag capacity minimizes interruptions, while the optimized fan design helps prevent clogging and ensures uninterrupted operation even under demanding production conditions. Dsdpevu Atwofx Aa Hewb Applications The CORMAK FM300 is ideal for: professional woodworking and furniture workshops extraction from table saws, thickness planers, jointers, spindle moulders, and routers industrial production facilities requiring central dust extraction technical schools and vocational training workshops carpentry businesses and custom woodworking shops Standard equipment Y-shaped steel inlet (2 × Ø100 mm or 1 × Ø130 mm) Mobile steel base with four caster wheels Two fabric bags (filter bag and collection bag) Optional equipment Flexible Ø100 mm suction hose (custom lengths available) Galvanized hose clamps Disposable plastic collection bags for quick replacement Technical specifications Parameter Value Airflow capacity 2,530 m³/h Maximum vacuum 1,800 Pa Noise level 70 dB Motor speed 2,850 rpm Motor power 1.5 kW Power supply 400 V / 3-phase Collection bag capacity 150 L Number of bags 2 (filter bag + collection bag) Suction inlet 1 × Ø130 mm or 2 × Ø100 mm Dimensions (L × W × H) 940 × 510 × 1960 mm Weight 56 kg User manual Included CE Declaration of Conformity Included

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM340 230V Dust Collector is a modern dust extraction system designed for efficient and quiet dust removal from woodworking machinery in workshop and light industrial environments. Equipped with a 1.5 kW single-phase motor and a large dynamically balanced metal impeller, it delivers an impressive 3,200 m³/h airflow capacity while operating from a standard 230 V power supply. It is an ideal solution for users looking for a compact, mobile, and reliable dust collector for sawdust, wood chips, and fine dust. Key Features Powerful 1.5 kW / 230 V motor – provides stable, high-performance operation without requiring a three-phase power supply. Airflow capacity up to 3,200 m³/h – efficiently extracts sawdust and dust from multiple woodworking machines simultaneously. 300 mm dynamically balanced impeller – ensures smooth, quiet, and vibration-free operation. Heavy-duty steel housing and metal impeller – designed for durability, rigidity, and long service life. 180° rotating inlet head – allows flexible positioning of extraction hoses to suit various workshop layouts. Mobile wheeled base – makes it easy to move the unit between workstations. Quick-release bag mounting system – enables fast, tool-free replacement of collection bags. Construction and Technology The CORMAK FM340 230V woodworking dust collector features a large metal extraction fan housed in a robust steel casing that provides excellent structural rigidity and durability for intensive daily use. Its 180° rotating inlet head allows the air intake to be positioned for convenient hose routing in different workshop configurations. The unit is supplied with a fabric filter bag and a 190 L plastic collection bag, allowing long operating periods before emptying is required. Performance and Efficiency With a motor speed of 2,850 rpm and a 300 mm impeller, the FM340 delivers powerful, consistent airflow and highly effective separation of sawdust and dust particles. The dust collector easily handles machines that generate large volumes of waste, including: Sliding table saws Thickness planers Spindle moulders The versatile extraction system offers either: One Ø150 mm extraction inlet, or Three Ø100 mm extraction ports providing maximum flexibility when configuring workshop extraction systems. Applications The FM340 230V is ideal for: Woodworking workshops Furniture manufacturing facilities Educational woodworking laboratories Professional and hobby workshops requiring powerful dust extraction from a standard 230 V power supply Standard Equipment One fabric filter bag One plastic collection bag Transport wheels Extraction inlet configuration: Ø150 mm or 3 × Ø100 mm Optional Equipment Ø100 mm flexible extraction hoses (various lengths) Dwodpfovu Ayksx Aa Hjb Galvanized hose clamps Additional plastic or fabric collection bags Technical Specifications Specification Value Motor power 1.5 kW / 230 V Motor speed 2,850 rpm Maximum airflow capacity 3,200 m³/h Maximum vacuum pressure 1,900 Pa Noise level 70 dB Impeller diameter 300 mm Extraction inlet Ø150 mm or 3 × Ø100 mm Collection bag capacity 190 L (500 × 1,100 mm) Overall dimensions (L × W × H) 985 × 560 × 2,210 mm Weight 45 kg

Condition: new, Year of construction: 2026, CORMAK TS255 Table Saw The CORMAK TS255 is a robust and precise table saw designed for professional woodworking shops and production workshops. Thanks to its advanced construction, large working area, and efficient three-phase motor, the machine ensures reliable performance during intensive use. It is a versatile tool dedicated to precise cutting of solid wood, panels, and wood-based materials. Main advantages of the machine Maximum saw blade diameter of 254 mm – enables cutting elements up to 80 mm thick at a 90° angle. Precise height and cutting angle adjustment – an ergonomic adjustment wheel allows smooth and accurate setting of cutting parameters according to the material being processed. Powerful 2.2 kW (S1, 400V) motor – provides constant power even when cutting hard wood species. Cast iron working table – resistant to deformation, ensuring stability and precise material guidance. Large sliding table and side extension table – increase machining capabilities when working with large elements. Stable steel construction – minimizes vibrations and improves safety and cutting quality. Construction and technology The TS255 table saw has been designed for long-term, trouble-free operation in industrial environments. The cast iron working table is precisely ground, ensuring smooth and accurate movement of the workpiece. The large sliding table (240 × 1320 mm) combined with the main table extension allows efficient processing of elements up to 1300 mm in length and 1250 mm in width. The integrated side table makes handling larger panels easier and more comfortable. The blade height and angle adjustment system is operated using an ergonomic handwheel, allowing quick and precise setting of cutting parameters. With a blade tilt range from 90° to 45°, the machine enables bevel and angled cuts without repositioning the workpiece. Precision and work efficiency Thanks to its solid construction and stable guidance system, the TS255 table saw provides excellent cutting repeatability. The blade speed of 4000 rpm, combined with optimized blade geometry, ensures clean and accurate cuts without tearing or burning of the material. The machine’s high efficiency allows fast and effective processing of large quantities of material, resulting in time savings and increased production performance. Applications The CORMAK TS255 table saw is a versatile solution for: Woodworking and furniture manufacturing companies – for precise cutting of large-format panels and wooden components. Production workshops – where reliability and high machine performance are required. Professional craftsmen – looking for a stable and accurate tool for everyday woodworking tasks. Technical education facilities – as a safe and effective machine for teaching woodworking operations. Standard equipment Carbide-tipped saw blade 254 mm Parallel fence Mitre fence Table extension Sliding table Technical specifications Parameter Specification Maximum saw blade diameter 254 mm Saw blade bore diameter 30 mm Blade speed 4000 rpm Blade tilt range 90°–45° Maximum cutting depth at 45° 50 mm Maximum cutting depth at 90° 80 mm Working table dimensions 350 × 800 mm Sliding table dimensions 240 × 1320 mm Maximum cutting width 1250 mm Djdpfx Ajvxhlgoa Hjwb Maximum cutting length 1300 mm Continuous motor power (S1) 2.2 kW Power supply 400 V Weight 180 kg Machine dimensions 1550 × 1900 × 820 mm

Condition: new, Year of construction: 2026, CORMAK PT410 Planer Thicknesser – Professional Woodworking Machine The CORMAK PT410 planer thicknesser is a high-performance woodworking machine designed for professional applications in carpentry workshops, furniture factories, and industrial production facilities. The applied technical solutions ensure exceptional precision, stability, and operator comfort during both surface planing and thicknessing operations. The PT410 model offers an impressive 410 mm working width and a powerful 5.2 kW (S6) motor, meeting the requirements of the most demanding users. Main advantages of the machine Heavy-duty, robust construction – a 330 kg machine weight and cast iron working tables eliminate vibrations, ensuring stable operation even when processing large wooden elements. S6: 5.2 kW motor (S1: 4.0 kW) – high motor power enables smooth machining of hard wood species and intensive operation without the risk of overload. Working width up to 410 mm – ideal for processing wide panels, beams, countertops, and furniture boards. Quick change between operating modes – eccentric locking mechanisms allow switching from planer mode to thicknesser mode within seconds. Aluminium fence with angle scale – precise adjustment from 90° to 45° enables machining of angled and bevelled elements. Central thicknessing table lifting system – ensures uniform material guidance without tilting or uneven thickness. Construction and technology The CORMAK PT410 planer thicknesser is built on a heavy welded frame with precision-ground cast iron tables. The 1660 mm long planer tables provide excellent material support and accurate feeding. The cutter block rotates at 5500 rpm and is equipped with three precisely adjusted HSS knives measuring 410 × 25 × 3 mm, allowing smooth and high-quality surfaces after a single pass. The 120 mm dust extraction outlet ensures efficient chip removal, which is essential during continuous operation. Precision and working efficiency The PT410 allows machining materials with a height range of 5–225 mm and provides a maximum cutting depth of 3.5 mm in thicknessing mode. The 7 m/min feed speed enables fast and efficient processing of large quantities of wood. Thanks to the accurate height scale and ergonomically positioned adjustment wheel on the right side of the machine, the operator has full control over machining parameters. Standard equipment Three HSS knives, dimensions: 410 × 25 × 3 mm Cast iron planer tables (1660 × 410 mm) Cutter head guard Feed stop switch and emergency STOP switch Ø120 mm dust extraction outlet Polish-language operating manual (DTR) CE Declaration of Conformity Technical specifications Parameter Specification Cutter block diameter 75 mm Cutter block speed 5500 rpm Dust extraction outlet diameter 120 mm Tilting angle of fence 90°–45° Number of knives / dimensions 3 / 410 × 25 × 3 mm Maximum planing width 410 mm Maximum thicknessing width 408 mm Dsdpfovxh T Dex Aa Howb Maximum thicknessing height 5–225 mm Maximum thicknessing cutting depth 3.5 mm Maximum planing cutting depth 4 mm Thicknessing feed speed 7 m/min Planer table dimensions 1660 × 410 mm Thicknessing table dimensions 600 × 408 mm Gross weight 330 kg Machine dimensions (L/W/H) 1640 / 920 / 1000 mm Motor speed 2800 rpm Motor power S1/S6 S1: 4.0 kW / S6: 5.2 kW Power supply 3-phase, 400 V Operating manual (DTR) Yes CE Declaration Yes

Condition: new, Year of construction: 2026, functionality: fully functional, LUFT 700 COMPACT Screw Compressor with Refrigerated Air Dryer and 500 L Compressed Air Tank The LUFT 700 COMPACT screw compressor with an integrated refrigerated air dryer and a 500 L compressed air tank is a modern solution designed for reliable and efficient compressed air supply. The CORMAK LUFT series screw compressors combine state-of-the-art pneumatic technology with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. THE SET INCLUDES: LUFT 700 COMPACT screw compressor with refrigerated air dryer 500 L horizontal compressed air receiver Are you looking for a professional solution for powering pneumatic tools in a workshop, paint shop or small production line? The CORMAK LUFT 700 COMPACT screw compressor with refrigerated air dryer is an excellent choice. With a 5.5 kW motor and an impressive actual output of up to 690 l/min, it provides a continuous supply of compressed air required for efficient operation of impact wrenches, blow guns and painting tools. It can also be used as a compressor for small sandblasting machines. This model has been designed for continuous-duty operation, making it ideal for demanding applications such as tyre service centres, automotive workshops and small manufacturing facilities. Investing in a CORMAK screw compressor means a significant improvement in working comfort – say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The screw compressor is also equipped with an integrated refrigerated compressed air dryer, which provides dry and clean air while protecting the compressed air system against corrosion and damage. The LUFT 700 COMPACT oil-injected screw compressor with dryer features a traditional belt drive, resulting in easier maintenance and lower servicing costs. Belt replacement is simpler and less expensive than repairing a direct-drive system, and a worn belt can be easily replaced with a new one. Dwedpjrh E Erofx Aa Hob Extended Component Service Life The belt drive also contributes to longer component life. The absence of a rigid connection between the motor and the compressor's working components reduces mechanical wear and stress, helping to extend the service life of the system. The maximum operating pressure generated by this screw compressor is 10 bar. Full control over the machine's operating parameters is provided by an intuitive MAM electronic control panel, giving the operator access to key machine information and greater flexibility and control over the production process. Key Parameters ✅ Pressure: up to 10 bar ✅ Air output: up to 690 l/min ✅ Motor power: 5.5 kW Technical Specifications Parameter Specification Motor power 5.5 kW Voltage 400 V / 50 Hz Output at 0–6 bar 690 l/min Output at 6 bar 650 l/min Output at 8 bar 650 l/min Output at 10 bar 630 l/min Outlet connection diameter (G) 3/4" Dimensions 1840 × 650 × 1675 mm Weight 370 kg

Condition: new, Year of construction: 2026, CORMAK Z5020 Vario / 400V Floor Drill Press – High-Performance Metal Drilling Machine The CORMAK Z5020 Vario / 400V floor drill press is a high-quality metal column drilling machine designed for demanding industrial users. Combining a robust construction, stepless spindle speed control, and large spindle travel, the machine is perfectly suited for precision machining of steel, cast iron, aluminium, and other structural materials. Main Advantages of the Machine Stepless spindle speed adjustment from 180–2000 rpm – allows precise parameter selection according to the material type and tool diameter. Large spindle travel of 150 mm – enables deep hole drilling without repositioning the workpiece. Tilting worktable ±45° – allows angled drilling operations and increases application flexibility. Solid 80 mm diameter column – ensures high structural rigidity and effective vibration damping during intensive operation. Precision drilling depth stop with scale – provides repeatability and full control in serial production processes. Integrated LED work light – improves visibility of the machining area in all working conditions. T-slotted table and base – simplify mounting of vices and technological accessories. Design and Technology – A Reliable Construction for Durability and Functionality The CORMAK Z5020 Vario column drill press has been designed with maximum stability and operator comfort in mind. The machine body is made of high-quality cast iron components, providing excellent vibration damping and resistance to deformation. The drive system uses a durable belt transmission, ensuring quiet and trouble-free operation. The 356 × 356 mm worktable provides a large machining surface for various workpiece sizes, while its vertical adjustment range of 600 mm allows processing of taller components. Precision and Working Efficiency – Designed for Demanding Machining Processes The CORMAK Z5020 Vario metal drilling machine is equipped with a powerful 1.5 kW, 400 V three-phase motor. This drive system provides stable torque, enabling efficient operation even when drilling larger diameters. The stepless spindle speed adjustment allows quick adaptation to different materials, while the rigid construction minimizes vibrations. This directly improves hole quality, reduces tool wear, and increases overall production efficiency. Standard Equipment Tilting worktable with T-slots Base with mounting slots LED work light Graduated drilling depth stop Stepless spindle speed adjustment Technical Specifications Parameter Value Maximum drilling diameter 25 mm Maximum chuck capacity 16 mm Spindle-to-column distance 215 mm Spindle taper MK3 Spindle travel 150 mm Column diameter 80 mm Motor 400 V / 50 Hz / 1500 W Gear transmission Yes Base dimensions 580 × 415 mm Worktable dimensions 356 × 356 mm Overall height 1710 mm Dwsdoridnvepfx Aa Hob Spindle speed range 180–2000 rpm Table vertical adjustment range 600 mm Packed dimensions 1510 × 690 × 256 mm Weight 95 kg

Condition: new, Year of construction: 2026, NEW ON THE POLISH MARKET 230 V screw compressor Screw compressors from the Polish brand CORMAK are a guarantee of quality and reliability. Our several years of experience in selling compressors has allowed us to create models with an excellent price-quality ratio. The presented model is perfect for small workshops or small manufacturing companies. It is characterized by high efficiency (380 l / min) in relation to its dimensions, which allows you to operate several devices at the same time. Very low noise level (60 dB) makes staying in the same room not inconvenient. Thanks to the high-quality components used, the compressor is designed for continuous operation and can be used in industry. Dsdpfxetz S H Nj Aa Hewb CORMAK screw compressors: When you expect the highest quality and efficiency! Are you looking for solutions that exceed market standards? CORMAK screw compressors are synonymous with innovation and reliability, created with the most demanding applications in mind. Innovative design: Our compressors are based on advanced engineering and European precision workmanship. The solid design, enriched with modern components, guarantees long-term and trouble-free operation in all conditions. Efficiency optimization: Thanks to inverter technology and intelligent algorithms, the LUFT 400 dynamically adjusts energy consumption to the current demand for compressed air. This means a significant reduction in operating costs while maintaining maximum efficiency. Proven drive system: The LUFT 400 compressor uses a reliable direct drive that minimizes loads on the screw block and engine, ensuring efficient operation and long service life. Quiet operation and comfort: Designed with attention to detail, our compressors are characterized by an exceptionally low noise level. Effective sound and vibration reduction systems provide a comfortable working environment, which translates into better concentration and well-being of operators. Intelligent control: The intuitive electronic control panel from the MAM series is the command center of your compressor. It allows precise monitoring of parameters, maintenance planning and quick diagnostics, ensuring stability and protection of key components. Adaptation to needs: We understand that each application is unique. CORMAK compressors can be configured with additional air treatment systems, allowing for a perfect fit to the specific requirements of your industry. Dynamic working pressure: Automatic pressure regulation ensures that the compressor delivers exactly the amount of compressed air needed at a given time, maximizing energy efficiency and minimizing losses. Sustainability: We focus on environmentally friendly solutions. Energy-saving technologies used in our compressors not only reduce your bills, but also reduce the impact on the environment, and the heat recovery option allows for maximum energy use. Technical parameters Engine power 3.0 kW / 4 HP Voltage 230V/50Hz Efficiency 0-6 bar average 400 L/min Efficiency at 6 bar 390 L/min Capacity at 8 bar 380 L/min Capacity at 10 bar 380 L/min Outlet port diameter (G) 1/2" Dimensions 800 x 520 x 740 mm Weight 95 kg Manufacturer: Cormak

Condition: new, Year of construction: 2026, Invest in modernity and versatility with the ZX 7055 DRO milling and drilling machine, ideal for small to medium-sized repair and production departments. This medium-sized machine not only offers an auto-feed with vertical head, but also threading functions and digital readout as standard. Product characteristics standard readout. Discover its reliable features that make the ZX 7055 DRO an excellent choice for your workshop: Heavy Stable Cast Iron: The solid construction in heavy cast iron is the foundation for durability and precision. The ZX 7055 DRO milling/drilling machine maintains stability even during the most demanding tasks. Automatic feed: Save time and increase productivity with the automatic feed. The motorised vertical head allows efficient machining of materials without the need for constant supervision. Solid Cross Table with Precision Ground Surface: Attention to detail is a key element of the design. The solid cross table with a precision-ground surface ensures excellent flatness, which will translate into precise machining. Swallow Tail Slides: Innovative dovetail-shaped guides guarantee smooth and precise movement in three axes. Achieve perfect results without compromise. Quiet Operation Thanks to Ground Gear Wheels: Focus on the work, not the noise. The ground gears make the router-drill run quietly for a comfortable working environment. Left and Right Rotation: Adapt the machine to your needs. The ability to rotate both ways gives you extra flexibility in the machining process. Head Rotation +/- 90° and Adjustable Head Height: Adapt to different tasks with +/- 90° head rotation and adjustable head height. Achieve precise results in all conditions. The ZX 7055 DRO milling/drilling machine is a state-of-the-art tool that will redefine your material processing experience. Order today and experience exceptional performance in your workshop! MAXIMUM FACE MILLING CUTTER DIAMETER 80 mm MAXIMUM END MILL DIAMETER 32 mm Dwedpjud H Thsfx Aa Heb HEAD ROTATION ANGLE +/- 90° SPINDLE ROTATION 75, 180, 280, 600, 1000, 1600 rpm SPINDLE FEED RATES 0,1; 0,18; 0,26 rpm MANDREL HANDLE MK4 SPINDLE PITCH 125 mm (automatic feed) WORKING TABLE DIMENSIONS 1000 x 240 mm TRAVERSE TABLE X/Y 670 x 185 mm WIDTH/SPACING/NUMBER OF T-SLOTS 18 mm/80 mm/3 DISTANCE FROM SPINDLE TO TABLE 90 - 460 mm DISTANCE FROM SPINDLE TO COLUMN 235 mm MOTOR POWER 1,5 kW / 2,1 hp POWER SUPPLY 400 V WEIGHT 425 kg PACKING DIMENSIONS 970 x 760 x 1160 mm Standard equipment spindle auto-feed digital readout longitudinal auto-feed of table with speed adjustment height adjustment of headstock with electric motor cooling system