Used Modular Buffet 6Gn for sale (981)

Condition: excellent (used), Year of construction: 2013, GEA Modular Membrane Filtration System up to 6.25 m³/h, in excellent condition and barely used. This equipment was used for just two validation batches, and after that has been in storage. It is currently equipped with spiral-wound nanofiltration membranes but other membrane types can be used for microfiltration (MF), ultrafiltration (UF), etc. The complete original manufacturer documentation is included in digital format, comprising the operating manual, process flow charts, wiring diagrams, certificates, inspection reports, and other relevant technical documentation. The system is designed to process a maximum volume of approximately 100 m³ of product (feed) per day. An average feed flow rate of approximately 4 to 6 m³/h is assumed under the “16/4” or “20/4” operating regime (Explanation: “20/4” corresponds to 20 hours of filtration operation / 4 hours of CIP cleaning). If, at a later stage, the daily processing capacity needs to be increased or the installed membrane surface becomes insufficient due to unforeseeable fouling effects, two empty slots are provided for retrofitting additional membrane housings. The piping and recirculation pump are already prepared for such an expansion. The membrane unit is designed for a semi-automatic cleaning-in-place (CIP) procedure. The system includes the required valves for internal circulation of cleaning solutions, followed by system flushing. Specifications - Feed volume: 400 - 500 m³/week - Feed volume: 80 - 100 m³/day - Feed volume: 4.0 - 6.25 m³/h - Production time: 16 - 20 h/day - Operating temperature: 35 to max. 65 °C Consumption - Power supply (pumps): 3 x 400 V, 50 Hz - Installed power: approx. 65 kW - Electric power consumption: 53.1 kW/h Hedpfovhctwox Abpep - Compressed air: 6 bar, oil- and water-free - Steam: 6 bar (max.) - Seal water: approx. 75 - 150 l/h - CIP water: approx. 19 m³/h - CIP water per cycle: 6 m³/CIP - Steam consumption per cycle: 100 kg/CIP - CIP chemicals: (e.g., membrane cleaner, acid, alkali, preservative, biocide) Limits - Max. operating temperature: 65 °C - Max. operating pressure: 30 bar - pH range for feed water: - Maximum: pH 10.0 - Minimum: pH 2.0 Cleaning-in-Place (CIP) - Max. temperature: 85 °C - Max. pressure: 10 bar - pH limits (for up to 30 minutes): - Maximum: pH 10.5 - Minimum: pH 2.0

Condition: used, Year of construction: 2018, functionality: fully functional, number of straightening rollers: 6, conveyor belt width: 1,300 mm, sheet thickness steel (max.): 1 mm, coil width: 1,250 mm, cutting length (max.): 6,400 mm, straightening roller diameter: 70 mm, space requirement width: 3,500 mm, space requirement length: 18,275 mm, space requirement height: 4,000 mm, Single-person operation, rapid access to a wide variety of sheets, automatic sheet changeover, standard sheets remain loaded in the system; the upper sheets are less common types; secure solution with a movable access aid for loading the upper decoilers; programmable slitting line with 8 pairs of knives in station version; slitting knives are alternately arranged for distortion-free cutting; rotary knives of the AL p with 100 mm diameter to achieve minimal incision; 7.2 m long conveyor belt for discharging the strips. The system layout PDF is shown as a mirror image! Hsdpexwc E Iofx Abpop

Year of construction: 2021, condition: new, modular drilling machine 8 automatic units Hodpfx Ashara Debpjp Do: Go mad Model: Wu 3g 2C 3T Description: Producer GOMAD Benh7jc8jp Year of production 2021 Machine category Modular drilling machine location Gorzów Wlkp. Conditions of delivery OWN COLLECTION Shipping costs Client protection Start type to be agreed Description Remarks MODULAR MODULAR DRILL, TRAILER SLIDING BLADE, HALF-ADAPTATION WITH AIR PEDAL DRILL EQUIPMENT Year: 2021 THE NEW VERSATILE DRILLING MACHINE

Condition: new, Year of construction: 2026, container length: 6,000 ft, color: white, overall weight: 1,900 kg, maximum load weight: 3,500 kg, empty load weight: 1,900 kg, loading space volume: 34.5 m³, loading space width: 2,400 mm, loading space length: 6,000 mm, loading space height: 2,400 mm, Modular container. We can manufacture it according to the customer's requirements, and we can also partition it and equip it with a kitchenette and a bathroom. Hjdey T Ifnjpfx Abpep

Condition: excellent (used), Modular system consisting of 6 channel modules Manufacturer: Murr Elektronik Model: Mico Pro 2 units are available individually, and several units are installed in control cabinets. Hjdpfjywynisx Abpjp We have several control cabinets in stock, with various configurations or also empty.

Condition: new, Year of construction: 2026, machine/vehicle number: GP6000H2, functionality: fully functional, input voltage: 400 V, type of input current: AC, pressing force: 12 t, total length: 6,000 mm, overall weight: 2,600 kg, working width: 180 mm, working length: 6,000 mm, Equipment: chassis, documentation/manual, MASSIVE GLUING PRESS FOR GLULAM Technical Specifications: Gluing Length: 6 m Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) Pressure Bar Length: 980 mm Gluing Width: from 80 mm to 180 mm Overall Gluing Height: from 800 mm to 1300 mm (available as per inquiry) Cylinder Stroke: 150 to 300 mm Clamping Force: max 10 tons per cylinder; the appropriate force is adjusted on the pressure regulator We prepare 3D Model of the Machine for you to plan the floor space The hydraulic unit is equipped with a hydraulic accumulator and a pressure switch, which allows the hydraulic pump to operate intermittently during the pressing time. The hydraulic accumulator ensures constant pressure, even when the pump is not in operation. When the pressure drops, the pump restarts and refills the accumulator. Cycle Time: approximately 10 seconds. Hodpfx Aou Axfcobpep All surfaces that come into contact with the adhesive are protected with polished stainless steel, making it easy to clean adhesive with water. The press features two trolleys with pneumatic cylinders for the lateral alignment of the glued workpiece. Machine Weight: 2600 kg Power Supply Requirement: 5 kW, 3 x 400 VAC Options: -Customized length up to 6 meters -Customized working width -Number of trolleys for lateral alignment available upon request -Trolley with roller for adhesive application available upon request -Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) last segment is as per order 2,0 - 6,0 meters -Customized Overall Gluing Height

Condition: used, Type: For Manorga boltless shelving units Size: For shelves with 57.5 cm depth Height: 14.5 cm Finish: Galvanized Price: 1.5 EUR/piece A shelf divider or shelf organizer is a practical storage accessory that allows you to subdivide shelves into smaller compartments or sections. These elements primarily help to maintain order and clarity for various items—such as books, documents, tableware, clothing, or office supplies. Hjdpfxox Uy E Ao Abpjp Shipping: Please inquire about freight costs by providing your postal code, location, and the desired quantity of items. Additional services: Planning, shelf assembly/disassembly, purchase/sale Subject to changes and errors in technical data, specifications, and prices, as well as prior sale!

Condition: good (used), Year of construction: 2010, functionality: fully functional, We are selling several dosing systems for liquid silicone of the brand Reinhardt - technik, model LSR 200 Modular, years 2004 to 2010. All units are operational and in good condition. Hjdpfx Abex A Sxzspjp

Condition: used, Year of construction: 2006, functionality: fully functional, We offer this used Digicon Omega modular label converting machine, year of construction 2006. Manufacturer: Digicon Model: Omega Hsdpfx Aboyffa Sepop Serial number: 10892 Date of manufacture: September 2006 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2012, machine/vehicle number: Modular, WEINMANN BUTTERFLY TURNING TABLE Hodpfx Ajt Uh Ayjbpop

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, 1 x Loma Systems bulk metal detector with alarm and stop on detect reject system. Stainless steel frame mounted on height-adjustable feet. Hjdozgwt Sjpfx Abpop Model - IQ3. Serial number - MD308-17641D. Aperture dimensions - 650mm wide x 350mm high (315mm clearance). Belt type - modular plastic. Belt dimensions - 2000mm long x 500mm wide. Electrical requirements - 230 V / 50 hz / 1 phase.

Condition: new, Year of construction: 2026, Ref:10804 . NEW 2026 Universal Z Card Line. Fully automatic line for making Z card fold-out maps, timetables and other promotional card leaflets etc. State of the art modular design and attachments that can be added as users requirements change. This unique line is capable of performing many different types of production with just one machine. Briefly Comprising:- LoCo friction feeder – bottom (option to go to 300 mm wide) LoCo friction feeder – inner text LoCo friction feeder – top Choice of PVA Cold glue or EVA Hot-melt gluing system – 4 heads with electronic control Counter/kicker Shingle delivery table Including accessories & spare parts. (In-house compressed air supply required). Hodpot Dpwdofx Abpep Specification: Stock weight : 90 – 400 gsm2 Production speed : max.150/min. depending on stock. Power requirement : Single phase, 220V, 3kW

Condition: good (used), Armor Inox Thermix Cook Chill System Operates using Thermix patented modular cooking and chilling process. It works by immersion with continuous circulation of water and recycling of hot, cold and chilled fluids. Assures best heat transfer and temperature control. 16 tonne system comprising 16 x 2 x 500 litre cook tanks, water storage tanks, panels, valves, pipework etc. Additional pipework, control system and valves would be needed if this was to be re-installed as some has been used already. Cost £3.5M Hedpeqyhakefx Abpep

Condition: used, all stainless steel electrically heated, max. 280°C adjustable speed 11 inspection/cleaning hatches belt width ± 1.000 mm Hjdpezg U Dnjfx Abpop net length ± 7.500 mm with belt wash system outside dimensions (l x w x h) : ± 9.500 mm x 1.600 mm x 2.400 mm Modular construction system Conveyor belt (opening 13 mm) total power 224 kW heating steam pressure: min 3 bar 10 kg/h per valve max. 3 bar 140 kg/h per valve cooking time min/max : 4min 36sec-120min steam injection (to heat up and to improve product yield)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 300 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 25 kg, total height: 700 mm, total width: 570 mm, total length: 500 mm, overall weight: 25 kg, table width: 305 mm, table length: 305 mm, table load: 25 kg, ambient temperature (max.): 50 °C, ambient temperature (min.): 5 °C, maximum load weight: 25 kg, Equipment: documentation/manual, type plate available, Renishaw Equator 300 Versatile Gauge Machine Type: Co-Ordinate Measuring Machine/Versatile Gauge Year: 2020 Condition: Excellent Condition Includes Equator Shopfloor Controller Kit Equator SM25-2U Probe Kit Equator Joystick Kit Equator Power Cable UK Modus Equator Equator Enclosure Kit Equator Gauge Checker Kit M6 EQ33 Modular Fixture Plate x 2 SH25-2A Stylus Holder x 3 Styli x 2 IPC Dongle with one Licence Technical Specification Working Volume X & Y: Ø300 mm Working Volume Z: 150mm Working Volume Height from Base: 55mm Machine Weight: 25kg Dimensions(without enclosure): 570 x 500 x 700mm Comparison uncertainty*: ±0.002 mm Probe type - scanning: Renishaw 3-axis SP25 analogue scanning Maximum scanning speed: (SP25) 200 mm/s Scanning rate (SP25): 1000 points/s Probe type - touch-trigger: Renishaw 3-axis TP20 kinematic touch-trigger Recommended touch speed (TP20): 10 mm/s Maximum movement speed: 500 mm/s Scale resolution: 0.0002 mm Hjdpfx Aoxyungebpjp Fixturing requirement*: ±1 mm Machine air supply requirement: No air required Operating temperature: +5 °C to +50 °C Storage temperature: -25 °C to +70 °C Relative humidity operating range: Maximum 80 %RH at 40 °C, non condensing Machine electrical supply requirements: 100-240 V AC ±10 %, 50-60 Hz Maximum power consumption: 190 W Typical power consumption: 80-100 W Fixture plate: 305 mm × 305 mm aluminium Maximum workpiece weight: 25 kg Notes * The process of measuring on an Equator involves defining a series of gauge points on the component surface. Periodic calibration of a master part on a CMM establishes datum values for each gauge point. The same gauge points on the same master part are measured on Equator, ‘mastering’, to establish a correlation with the certified CMM. Subsequently, a regular ‘re-mastering’ process is used to account for changing environmental conditions. Size and position measurements made immediately following re-mastering will have a comparison uncertainty of ±0.002 mm relative to the certified measurements of the masterpart. This specification applies where each part is fixtured to within 1 mm relative to the master part. Peak consumption at power up. 3-axis system typical consumption based on taking touch points under DCC control. Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2024, Yokogawa WT5000-HG-F Precision Power Analyzer Manufacturer: Yokogawa Test & Measurement Corporation Type: WT5000-HG-F Model: WT5000 Machine Type: Precision Power Analyzer Date of Manufacture: 11/14/2024 For sale is a used Yokogawa WT5000-HG-F Precision Power Analyzer. This high-precision measuring system is suitable for demanding power, voltage, current, and energy analysis in research, development, test laboratories, power electronics, drive technology, and quality assurance. The modular design allows for the flexible use of various measuring elements and offers the highest measurement accuracy for modern testing tasks. Technical Data Model: WT5000 Version: HG-F Date of Manufacture: 11/14/2024 Measuring Modules: 7 slots Configuration: 760903 Current Sensor Elements (as shown in the pictures) Max. Voltage: 1000 V AC Sensor Power Supply: ±15 V DC Mains Connection: 100–120 V / 200–240 V AC Mains Frequency: 50 / 60 Hz Power Consumption: max. 650 VA Interfaces Ethernet (LAN) USB 3.0 USB Front Port GP-IB / IEEE-488 Video Out (XVGA) External Clock BNC Connectors Analog Pulse Inputs Features Large Color Touch Display Front-Side Control Panel Modular Design with Pluggable Measuring Elements 760903 Current Sensor Elements Multi-Channel Power Measurement Data Storage Function USB and Network Communication Rack Mounting Possible Power Cable Accessories as Shown in the Pictures Application Areas Precision Power Measurement Energy Analysis Active, Reactive, and Apparent Power Measurement Power Electronics Electric Motor and Inverter Testing Inverter Testing Battery and Accumulator Tests Automotive Test Laboratory Research and Development Quality Assurance Condition Used Optical condition as shown in the pictures. Scope of Delivery Yokogawa WT5000-HG-F Precision Power Analyzer 760903 Current Sensor Elements (as shown in the pictures) Hodpezhl D Ijfx Abpep Power Cable Mounting Material / Accessories as Shown in the Pictures Scope of delivery includes only the items shown in the pictures. Subject to changes, errors and prior sale.

Condition: good (used), Bühler PML2 Premium Laboratory Stirred Ball Mill Manufacturer: Bühler LTD, Uzwil, Switzerland Type: FPML2 Premium / PML2 Premium Hodpfx Aszhkcpobpep Machine Type: Laboratory Stirred Ball Mill / Bead Mill Application Area: Process development, dispersion, and fine grinding at laboratory scale For sale is a laboratory stirred ball mill from Bühler. The PML2 Premium is a modular laboratory system for the development and optimization of grinding and dispersing processes at laboratory scale. The system is suitable for research and development work as well as small-batch trials of various products. Application areas: Automotive OEM and refinish paint systems Anti-corrosion paints Industrial paints Color filters for display technologies Metal, ceramic and glass pastes Inkjet inks Liquid printing inks Liquid toners Agrochemicals Pigment concentrates TiO₂ dispersions Adhesives and sealants Technical data: Active grinding chamber volume: 0.2 - 1.2 dm³ Volume of grinding media tank: 2.4 dm³ Max. grinding media pressure: 7 bar Motor power: 2.2 kW at 3,000 rpm Rotor speed: 500 - 4,500 rpm Cooling water connection inlet: G 1/2" Cooling water connection outlet: G 1/2" Compressed air connection: G 1/4" Power connection: 400 V Frequency: 50 Hz Phases: 3 + N + PE Rated current: 16 A Machine dimensions approx.: 617 x 458 x 862 mm (W x D x H) Machine weight approx.: 150 kg Equipment: Bühler PML2 Premium grinding system Control panel / switch cabinet Grinding container system Pump units according to scope of delivery Piping and connections Existing documentation Further accessories as shown in the pictures Weights of the components: Machine: approx. 150 kg Hose pump: approx. 30 kg Gear pump: approx. 25 kg Laboratory hose pump: approx. 8 kg Attachable container: approx. 5 kg Tray: approx. 1.5 kg Condition: Used From a laboratory environment Optical condition as shown in the pictures Functional scope not fully tested Inspection possible by appointment Scope of delivery: Bühler PML2 Premium laboratory stirred ball mill Control cabinet Existing attachments Documentation Further accessories as shown in the pictures Availability: upon agreement. Scope of delivery as shown in the pictures. Subject to changes and errors in technical data and prior sale.

Condition: used, Condition: NEW with pneumatic clamping device. The universal assembly station for the production of wall, ceiling and roof elements in timber frame construction,ceiling and roof elements in timber frame construction. - Heavy-duty, basic structure of the machine frame for a flat work surface - Clamping of the elements via 9 system clamping beams with pneumatic pressure cylinders. Hodpfxozhnafe Abpsp The system clamping beams are extendable for element heights from 100 to 3,800 mm. The cylinder stroke is 320 mm, the clamping force per cylinder is approx. 420 kg/4,200 N. at 10 bar operating pressure It can be clamped in two groups of 5 pieces and 4 pieces, two elements can be clamped/worked on at the same time. - Planking of the work surface as far as technically possible with wooden panels. (A perforated metal panel is available as an option, as shown in the photo)) - Stop system at the bottom with 9 pins and at the side with 7 pins for dimensionally accurate elements. - Swivelling device of the assembly station via 3 hydraulic cylinders for panel weights up to panel weights of up to 4,000 kg to 85° (95°). The hydraulic system is compactly integrated in the frame area of the assembly station. - The electrical control cabinet is also installed underneath the assembly station for protection. - The functions are operated via a control bottle. - A compressed air connection and socket are installed on both ends of the station. and on the long side of the station there are 2 sockets and 2 compressed air connections compressed air connections for connecting hand-held devices. - The stations are modular in design, so that they can be expanded immediately or later with a to form a complete turning station. You can see a turning station in picture 3. - Further options: Assembly table without set-up function Perforated metal panels Other working dimensions on request Working area: - Maximum element size (W x H): 12,000 x 3,800 mm - Minimum element size (W x H): 1,000 x 100 mm - Cylinder stroke of the clamping cylinders: 320 mm - Stop/ socket pin height: 120 mm - Working height: approx. 700 mm - Colour RÁL 7035 light grey

Condition: new, - Practical clamping system for panels, for trimming the underside and processing without intermediate storage of cut-offs - Comfortable height adjustment of the clamping jaws via control panel - Smooth and ergonomic operation - Modular welded machine frame, torsion-resistant and self-supporting - Scoring device for tear-free cutting quality - Automatic retraction of slatted frame during sawing - Central workpiece support for maximum flexibility Hsdjwnrf Ujpfx Abpop - Easy switching between vertical and horizontal processing - Digital stop gauge - Transport wheels liftable via pedal for easy moving of heavy panels - Durable and precise material support for stable workpiece position - Pneumatic locking of the saw carriage - Large opening for saw blade change Extraction connection: - Extraction nozzle diameter: 100 mm - Extraction air requirement min.: 1800 m³/h - Air speed min.: 20 m/s Equipment: - Lower material support: metal rollers - Retractable slatted frame: automatic - Vertical measurement display: digital - Horizontal measurement display: digital - Panel clamping system - Locking of saw carriage: pneumatic - New exhibition machine -

Condition: used, From € 45,00 now for € 40,50. Now with a 10% discount. Hodpfxjy R Stwo Abpsp Recycled Plastic Shelf Rack 1 Section 915x435x1825 mm – Shelving unit with 5 grid levels This 1-section recycled plastic shelf rack is a sustainable and circular solution for storage in warehouses, workshops, garages, and damp areas. By using recycled material, plastic waste

Condition: used, A used demountable META shelf rack (5270x635x2500 mm) made of galvanized steel is a durable and versatile storage system in various environments, such as warehouses, garages or industrial areas. Galvanized steel offers excellent corrosion resistance, making the storage rack durable and suitable for various environments, including humid Hjdsw Sxvmepfx Abpjp

Condition: used, From € 47,50 now for € 42,75. Now with a 10% discount. Recycled Plastic Shelf Rack 1 Section 915x435x1845 mm – Shelving unit with 5 grid shelves – on legs This 1-section recycled plastic shelf rack is a sustainable and circular solution for storage in warehouses, workshops, garages, and damp areas. Hjdpfx Aoy R Stqebpsp By using recycled material,

Condition: used, From € 70,00 now for € 63,00. Now with a 10% discount. Hedpfxoy R Stks Abpop 1-Section Shelf Unit 1000x400x1600 mm – Warehouse Shelving with 5 Adjustable Levels This 1-section shelf unit is a practical and versatile solution for storing goods in warehouses, workshops, offices, and storage areas. Thanks to its compact size and adjustable levels, this

Condition: used, This shelving unit starter section is an efficient and durable solution for the organized storage of goods in warehouses, workshops, and logistics environments. Thanks to its modular design and robust construction, this shelving unit is ideal for professional use and easy to adapt to changing storage needs. Hjdpfjy Hpw Sjx Abpep The unit measures

Condition: used, This shelving extension section is a practical addition to an existing shelving unit and offers an efficient solution for easily increasing storage capacity. Thanks to the modular design, the system can be expanded flexibly, creating a clear and scalable storage setup. Hjdpfx Ajy Hpw Eobpsp The extension section measures 1,400 x 560 x 1,580 mm (W