Used Memmert B60 Incubator Heating Cabinet Laboratory Oven for sale (20,761)

Condition: used, Binder Type: VDL 115 Binder Safety Vacuum Drying Oven For sale is a BINDER VDL 115 safety vacuum drying oven for professional use in laboratories, industry, and research. Device description: The BINDER VDL 115 is an explosion-proof vacuum drying oven for gentle drying, degassing, and conditioning of materials under vacuum. The device is specifically designed for applications involving flammable solvents and meets high safety requirements (ATEX version). Due to the precise control of temperature and pressure, the device is ideally suited for reproducible laboratory and industrial processes. Typical applications: Chemical and pharmaceutical laboratories Research & development Quality control Industrial drying processes under vacuum Temperature / Vacuum: Temperature range: +9 °C above ambient to approximately +110 °C Final vacuum: up to approximately 0.01 mbar Electronic temperature and pressure control Equipment: Safety glass pane with splinter protection ATEX-compliant design Several insertion levels (number depending on the configuration) Connections for vacuum and inert gas Dimensions: Internal volume: approximately 115–119 liters Internal dimensions (W × D × H): approximately 506 × 460 × 506 mm External dimensions (W × D × H): approximately 743 × 581 × 942 mm Electrical data: Hedpfsziyymjx Aggsfn Rated power: 1.90 kW Mains connection: 230 V / 1N~ Current consumption: 8.3 A Frequency: 50–60 Hz Protection class: IP54 Rated temperature: 200 °C Temperature protection: DIN 12880, Class 2.0 Weight (empty): approximately 158 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, GH Induction Type: 30 SMBC Transistor generator for inductive heating Medium frequency with series resonant circuit The SMBC generator series retains the traditional advantages of the Transithermic family of generators (high reliability, ease of operation, and high efficiency) in a series resonant circuit and a compact design, with cooling integrated into the generator cabinet. Rittal generator cabinet and GH Induction TC150/2 resonant circuit Voltage 400V, Frequency 50 Hz, Current 56 A, Power 37.5 KVA In like-new condition! Hfjdpfxszdp H So Aggsn Scope of supply: Transistor generator, Rittal generator cabinet with cooling, and TC150/2 resonant circuit (Subject to changes and errors in the technical data; specifications are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, IKA LR 2000 V Laboratory Reactor For sale is a professional, modular IKA LR 2000 V laboratory reactor system in immediately operational condition. This configuration is the ideal workhorse for product development, simulation, and small-scale production (e.g., in the fields of cosmetics, pharmaceuticals, chemistry, or food technology). Thanks to its vacuum capability and the combination of an anchor stirrer and a high-performance disperser, the system is perfectly suited for the production of stable emulsions, creams, and lotions. Here you receive a complete, ready-to-use system. The expensive double-walled glass vessel with a bottom outlet, the heating bath with a temperature sensor, and the Ultra-Turrax T25 including shaft are already included in the package. You save yourself the trouble and the cost of purchasing individual components, which would amount to thousands of euros! Scope of delivery & technical components: Reactor vessel: Double-walled 2.0-liter vessel made of high-quality borosilicate glass 3.3. The jacket enables precise heating and cooling via external thermostats. Equipped with a practical bottom outlet valve for clean emptying. Mixing tools: Integrated anchor stirrer for optimal removal of material from the vessel walls when processing viscous substances, as well as a suitable flow breaker to prevent vortex formation and ensure perfect vertical mixing. Dispersing unit: IKA ULTRA-TURRAX T25 including a suitable dispersing shaft. Hjdpfx Agjz I Szwogofn Enables highly effective homogenization and comminution directly during reactor operation. Drive & control: Robust IKA control unit RE 162 P for powerful stirring even at low speeds. Temperature control: Water bath LT5 control including an external temperature sensor. The sensor measures the temperature directly inside the reactor medium, which enables highly precise control via the water bath. Accessories: Complete stand system for the secure mounting of all components, as well as all necessary holders. Note: The sale does not include software for controlling the system. The system can be fully, independently, and easily controlled directly via the hardware controls. "All from one source: We would be happy to offer you suitable financing for your project." More items – new and used – can be found in our shop! International shipping costs on request!

Condition: used, Binder Safety Vacuum Drying Oven Binder VDL 115 Safety Vacuum Drying Oven ATEX version for potentially explosive areas For sale is a used safety vacuum drying oven from the manufacturer BINDER GmbH. The vacuum drying oven is suitable for gentle drying, degassing, and conditioning of temperature-sensitive materials under vacuum, as well as for applications with flammable solvents. Technical data Manufacturer: BINDER GmbH Type: VDL 115 Device type: Safety vacuum drying oven Internal volume: approx. 115 liters Internal dimensions: approx. 506 × 460 × 506 mm (W × D × H) External dimensions: approx. 743 × 581 × 942 mm (W × D × H) Weight: approx. 158 kg Temperature range: approx. +9 °C above ambient to +110 °C Ultimate vacuum: up to approx. 0.01 mbar Electronic temperature and pressure control Rated temperature: 200 °C Rated power: 1.90 kW Mains connection: 230 V / 1N~ Rated current: 8.3 A Frequency: 50–60 Hz Protection class: IP54 Temperature protection: DIN 12880 Class 2.0 Item number: 9030-0012 Hodoznbm Eepfx Aggjfn Equipment ATEX version Electronic temperature control Vacuum indicator Digital display Viewing window in the door Stainless steel interior Several insertion levels Connection for vacuum Connection for inert gas Original brief operating instructions on the device Application areas Chemical laboratories Pharmaceutical laboratories Research and development Quality control Material testing Gentle vacuum drying Degassing and conditioning Condition Used Optical condition as shown in the pictures Scope of supply 1x Binder VDL 115 Safety Vacuum Drying Oven Accessories as shown in the pictures The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Shipping or freight shipping is possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, GRIESER Type: GFD 11 LST Product: Grieser Laboratory Stand Dissolver Intended Use: The machine is used for mixing powdery solids, liquids, and pastes, as well as for incorporating fillers. The viscosity range can range from thin to pasty. Machine Design: The laboratory stand dissolver consists essentially of the machine stand, the lifting device, the drive for the mixing tool, the telescopic hood with spring pressure, the collet chuck, and the control cabinet (non-Ex) with control and compact controller. In the working position, the container (customer-supplied) and the telescopic hood form a closed mixing chamber. A hose connection is provided on the hood, which serves according to the intended use. The drive of the mixing tool is equipped with a speed control via a frequency inverter. The arrangement, power, and speeds of the motors can be found in the attached project drawing. The speed of the mixing tool, the mixing time/remaining mixing time, mixing sequences, and other functions can be displayed on the display of the compact controller. Operation Switching on and off is done via corresponding buttons in the control cabinet. Lifting the mixing tool drive Lifting is carried out by switching on the lifting motor. This runs only as long as the push buttons (two-hand safety circuit UP-UP) are pressed. After releasing the buttons, the arm remains in any desired position. Lowering the mixing tool drive To lower the arm, the corresponding buttons (two-hand safety circuit DOWN-DOWN) on the control panel are pressed. Hodpezdtflsfx Aggefn Mixing tool change The mixing tool shaft is provided with an M8 connection thread. Depending on the requirement, the mixing tool (stirring blade, customer-supplied) can be unscrewed and replaced. Technical data: Machine type: GFD 11 LST Year of construction: 2017 Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V DC Mixing tool speed: 25 – 500 min-1 via frequency inverter Ambient temperature: +5°C to +40°C Protection class: IP 54 Container: 1.18 liters, D=100, H=150 (75) customer-supplied Mixing tool: Stirring blade, customer-supplied Control panel / display The machine is operated primarily via the compact PLC controller "Vision 560-T25B". Safety-relevant functions such as disconnection from the mains via the main switch, shutdown in case of danger by pressing the emergency stop button, and the two-hand operation for opening or closing the mixing chamber are excluded. The control panel consists of an illuminated LCD display and film-covered tactile buttons. The buttons marked with a letter have fixed functions assigned to them. These can be activated at any time, independently of the menu. As soon as a function has been activated, the corresponding status appears in the upper right area of the screen in the "Operating Display" menu. The individual menu screens can be switched through using the up and down buttons. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: good (used), Revent Single Rack Oven Rotary Rack Oven Complete with one mobile oven rack Hfodpfsyw T D Dsx Aggen In good working condition

Condition: used, Mettler Toledo Hodpozix Ddofx Aggefn Type: TGA/DSC 1 STAR® Description For sale is a METTLER TOLEDO TGA/DSC 1 STAR® system, a high-quality and precise laboratory instrument for the thermal analysis of materials. The instrument combines thermogravimetric analysis (TGA) and differential calorimetry (DSC) in a single system and is ideally suited for applications in industry, research, materials testing, and quality assurance. Functions & Applications Thermogravimetric analysis (mass changes) DSC analysis (heat flow, melting points, Tg) Analysis of plastics, polymers, chemicals, pharmaceuticals, and materials Temperature and time-dependent measurements High precision and stability Network and PC compatible (STAR® system) Technical data (approximate) Dimensions: approx. 500 × 500 × 600 mm Manufacturer: METTLER TOLEDO Model: TGA/DSC 1 STAR® Sensor type: SDTA FRS2 Power connection: 100–240 V / 50–60 Hz Power consumption: approx. 300–600 W Weight: approx. 35–45 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Lauda LAUDA Heat Transfer Unit ITH350/25kW – Industrial Temperature Control Unit For sale is a high-quality heat transfer unit from the LAUDA brand, model ITH350/25kW. Ideal for industrial applications, laboratories, or production processes that require precise temperature control. Special features: Robust construction, reliable for continuous operation Precise temperature control over a wide range Protection class IP54 – dust and splash water protected Technical data: Type: ITH350/25kW Article No.: LSI 51807 Supply voltage: 400 V / 3~ / PE / 50 Hz Power consumption: 28.5 kW Current consumption: 41 A Permissible temperature [TS]: +20°C … +350°C Protection class: IP 54 Heat transfer circuit: Medium: Marlotherm SH Minimum flow rate: 1 m³/h Nominal size: DN 25 Permissible max. operating pressure: 10 bar Weight: approx. 700 kg Condition: used Hfjdpfozii T Njx Aggon Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Year of construction: 2020, condition: used, This listing is for the Labogene ScanLaf Mars 1500 Class II biological safety cabinet The unit is in full working condition and ready for immediate us The Labogene ScanLaf Mars 1500 is a Class II biological safety cabinet designed to provide operator, product and environmental protection. It features HEPA filtration, vertical laminar airflow, motorised front window and adjustable lighting. The working width is 1500 mm and the cabinet is manufactured and tested to EN 12469 requirements. External dimensions are approximately 1604 x 797 x 2033 mm and weight is approximately 275 kg, excluding the stand. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory Hfjdpfx Agez D Dl Tjgjn

Condition: used, This listing is for the CAS Biomat 2 Microbiological Safety Cabinet + Formalin Vaporiser The unit is in full working condition and is ready for immediate use The CAS Biomat 2 (manufactured by Contained Air Solutions) is a high-performance Class 2 Microbiological Safety Cabinet designed to provide a sterile environment for both the user and the sample. It is ideally suited for laboratories working with biological agents up to Biosafety Level 3. Key Features & Functionality: Triple Protection: Utilises a sophisticated airflow system (inflow and downflow) to protect the operator from airborne hazards, ensure product sterility via HEPA-filtered laminar air, and safeguard the environment by filtering exhaust air. Certified Safety: Fully compliant with BS EN 12469:2000 standards, ensuring it meets rigorous European safety requirements for biological workstations. Advanced Filtration: Equipped with high-efficiency H14 HEPA filters to create an ISO Class 5 clean environment. Hfjdpfx Agoyvhn Iogjn User-Friendly Control: Features an intuitive control panel for managing work area lighting, gas valves, and decontamination cycles. Integrated Decontamination: Includes built-in functionality for UV sterilisation and formalin fumigation, with some models featuring real-time status monitoring and VHP (Vaporised Hydrogen Peroxide) ports for thorough cleaning. Practical Design: Often includes internal electrical sockets for equipment like balances or stirrers, pipette holders, and energy-efficient LED lighting.

Condition: used, This listing is for a UVP UV3 Hepa PCR Cabinet PCR Workstation The unit is in full working condition and ready for immediate use This PCRworkstation is a high-quality lab instrument manufactured by UVP (Model: UV3 Hepa PCR Cabinet). A specialized HEPA-filtered cabinet with built-in UV illumination to prevent cross-contamination during sensitive PCR setups. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Hfjdpfx Aszuf S Esggon Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, Julabo Type: FP51-SL (v.2) Julabo recirculating thermostat SL v2 with cooling unit FP51 – heating/cooling thermostat Description: Hodpfx Ajzizn Sjggefn For sale is a professional Julabo recirculating thermostat SL (v2) in combination with the Julabo cooling unit FP51. The device is used for the precise temperature control of liquids and external circuits. It is ideal for laboratory, industrial, and test bench applications. The system enables both heating and active cooling and impresses with stable and accurate temperature control. Technical data (excerpt): Recirculating thermostat: Julabo SL (v2) Temperature range: approx. +20 °C to +320 °C Mains connection thermostat: 230 V / 50–60 Hz Cooling unit: Julabo FP51 Mains connection cooling: 400 V / 3NPE / 50 Hz Refrigerant: R507 Protection class: IP21 Dimensions & weight: approx. 60 × 70 × 100 cm approx. 120–150 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, ATM Type: ATM Brillant 255 ATM Brillant 255 Cut-off Grinding Machine 400V Metallography Laboratory 2019 Description: A professional cut-off grinding machine, ATM Brillant 255, is for sale. Year of manufacture: [Year of manufacture] Industrial equipment for precise material separation in the field of metallography, laboratory, and material testing. Hsdpfxezizp Ao Aggefn Machine with base cabinet and integrated coolant system. Several matching cut-off wheels are available (see pictures). Very robust, professional quality. Technical data (according to the nameplate): Type: Brillant 255 Year of manufacture: [Year of manufacture] Manufacturer: ATM GmbH Electrical data: Voltage: 400 V (three-phase) Frequency: 50 Hz Power: 12.5 kVA Fuse rating: 32 A Mechanical data: Cut-off wheel: Ø 400 mm Max. wheel speed: approx. 3050 rpm Wheel arbor: 32 mm Machine stands on a base cabinet with a coolant tank. Dimensions: Width: approx. 120 cm Depth: approx. 80 cm Height: approx. 150 cm Weight: approx. 450 kg Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, This listing is for the Envair Technology B102 Microbiological Safety Cabinet + Mobile Stand The unit is in full working condition and is ready for immediate use Overview: Envair Technology Bio 2 Essential (B102 Series) Certifications & Intended Use Fully compliant with BS EN 12469:2000, ensuring reliable biosafety standards. Envair Technology Suitable for handling biological agents up to ACDP Hazard Group 3, provided proper laboratory siting. Ideal for cell culture and related work. Envair Technology Design & Construction Width: 1200 mm. External body: Constructed from white polyester-coated mild steel. Work zone: Lined in 304-grade stainless steel with side-glazed panels. Work surface: Removable and dished, crafted from 316-grade stainless steel. Envair Technology Airflow & Filtration Offers recirculating or ducted configurations. Equipped with downflow HEPA filtration (Class H-14, ≥ 99.995% efficiency) according to EN 1822‑1 standards. Lighting & Fans Hjdpfx Agexhfpkogofn Illuminated using low-energy LED lighting mounted external to the work area. Ventilation is powered by independent EC-type energy-efficient fans, both above and below the working zone. Envair Technology Control Interface Features an integrated positive-touch membrane control panel positioned above the work area, with animated display feedback. Envair Technology Compliance & Standards In addition to BS EN 12469:2000 and HEPA filter standards, the Bio 2 Essential cabinets also meet: IEC 61010‑1:2010 Air quality standards: ISO Class 5 (BS EN ISO 14644‑1:2015) and EU GMP Grade A.

Condition: good (used), Weiss climate testing chamber with seat pulsator Manufacturer: Weiss Type: SD 1400/+20 DU Test chamber: Material: Stainless steel Dimensions: Height approx. 800 mm Width approx. 2000 mm Depth approx. 900 mm Volume: 1440 liters Outer housing Material: Double-coated Zincor sheet Dimensions: Height approx. 2000 mm Width approx. 2200 mm Depth approx. 2000 mm Hfodjxbgrgepfx Aggjn H x W x D 2000 x 2200 x 2000 mm Paint finish: Light grey (RAL 9002) Door, double-leaf: Hinged on the left and right Equipment: Pass-through in the floor and ceiling: 2 each, DN 100 mm, for inserting the pulsation tables Pass-through in the side walls: 1 each, left, right, 100 mm Refrigeration unit: Air-cooled Control: Digital measurement and control system DMR Basic control panel: Integrated into the main switch panel Interface: RS 232 C, for connection to a PC Software: Operating software for MS-Windows Performance data: Temperature range without climate control: +20...+100 °C Temperature stability without climate control: +0.2 … +0.5 K (time-dependent) depending on the range, in the steady state Temperature range with climate control: 20...+95 °C Temperature stability with climate control: +0.2 … +0.5 K (time-dependent) depending on the range, in the steady state Dew point range: 20...+94 °C Humidity range: 10...98 % RH Humidity stability: +3 ... +5 % RH, depending on the range, in the steady state Temperature change rate measured in the outlet without a test specimen and without a load - Cooling: 0.5 K/min. on average, between +100 and +20 °C - Heating: 0.5 K/min. on average, between +20 and +100 °C The performance data refer to an ambient temperature of max. +25 °C and the specified rated voltage For trouble-free operation of the system, the ambient temperature must be between +10 and +35 °C Connections / Other Protection class: IP 32 for the control cabinet Sound pressure level during free-field measurement at a distance of 1 m in front of the device: 60 dB (A) Humidification water: fully demineralized, conductivity max. 20 μS/cm, pH value 6 - 7, automatic topping up Condensate drain: back-pressure-free, 3/4" hose connection Power connection: 400 V; 3 PH+N PE; 50 Hz Connected load: max. 10 KVA Weight: approx. 1160 kg Seat testing device with steel structure for mounting and securing to the climate testing chamber, including: • 2 pneumatic weight lifting devices (150 mm stroke) for test specimen change, 12 weights each weighing 5 kg • 1 base frame in normal steel welded construction for attachment to the underside of the climate testing chamber. This frame is provided on all sides with removable sheets and has 2 folding doors for adjusting the eccentricity. These doors have safety switches. • 2 eccentric disks with bearings and tachometer, 2 connecting rods, 2 ball guides • 2 mounting tables, perforated, 20 mm grid, 650 x 650 mm, for connecting the test specimens, made of aluminum, thickness min. 10 mm • 2 mounting plates, perforated, 20 mm grid, 200 x 200 mm, for connecting the buttocks replica • 2 load rods, 600 mm long, made of stainless steel (The connection to the test specimen is not included in our price, but can be offered subsequently after a precise definition) • 2 three-phase motors, 2 belt drives with tensioning devices • 1 pneumatic control system with 2 manual valves, one filter-regulator unit and one shut-off valve, 1 electrical control cabinet with 2 SEW frequency inverters, hand switch, emergency stop button, 2 push buttons,

Condition: new, Year of construction: 2024, input voltage: 380 V, total length: 1,870 mm, total width: 2,000 mm, total height: 1,940 mm, overall weight: 2,250 kg, number of chambers: 1, fuel type: hybrid, MRi Range – MRi130 Standard Energy source: wood + gas Total wood power: 35 kW Total gas power: 36 kW Natural gas consumption: 3.8 m³/h LPG consumption: 2.7 kg/h Gas connection: 3/4” G Capacity: 10 pizzas Ø30 cm Productivity: 170 pizzas/h Hodszlg T Sopfx Aggsfn Gas-heated rotating hearth Hearth with variable speed and direction Two independent burners Radiant atmospheric burners Burners designed by Morello Forni High refractory mass Insulation designed to minimize heat loss Dual manual/automatic mode Manual mode with flame modulator Inteltouch System touchscreen interface Analog, thermostatic controls (optional) Side firebox with door External ash collection drawer Sorrentino floors (upon request) External dimensions: 2000 × 1870 × 1940 mm Oven opening width: 650 mm Net weight: 2250 kg General overview The Morello Forni MRi130 Standard is a hybrid wood and gas rotating oven designed for pizza professionals seeking a powerful, consistent solution suitable for high-volume service. It can operate on wood alone, gas alone, or in a combined wood + gas mode, allowing you to adjust the cooking process according to the production rate, pizza style, and kitchen layout. With a capacity of 10 pizzas Ø30 cm and a stated production of 170 pizzas/h, this hybrid professional pizza oven is aimed at pizzerias, Italian restaurants, open kitchens, and catering establishments that need a wood/gas rotating oven capable of handling a high volume while maintaining uniform cooking.

Condition: good (used), EKU C9F-6GS 6-burner natural gas range Cooktop (gas burners) Number of cooking zones: 6 independent gas burners. Burner configuration: Divided into two performance classes for flexible pot sizes: 3 x small/medium burners: each 3.5 kW (burner head diameter approx. 80 mm) 3 x large high-performance burners: each 6.0 kW (burner head diameter approx. 110/120 mm) Total cooktop output: 28.5 kW gas output. Features: Cast iron pot supports (slide-out grates) and thermoelectric flame failure device on each burner for maximum operational safety. Oven (under-counter) Type: Gas-powered large-capacity oven (statically heated) with piezoelectric ignition. Oven output: approx. 8.0 kW to 9.0 kW burner output. Internal dimensions: Suitable for gastronorm racks and trays (GN 2/1). Temperature range: Adjustable from 100 °C to 300 °C via a safety gas thermostat. Connection values Total connection value (gas): approx. 36.5 kW to 37.5 kW (sum of cooktop and oven). Gas type: Standard setting for natural gas (20 mbar) (can be converted to liquefied gas/propane by changing the nozzles). Gas connection: R 1/2" or R 3/4" thread. Dimensions and weight Appliance external dimensions: approx. 1200 mm (width) x 900 mm (depth) x 850 mm (height) – suitable for the standardized 900 series of large kitchen modules. Material: Housing and top completely made of stainless chrome-nickel steel (CNS / stainless steel). "Everything from a single source: We would be happy to offer you suitable bank financing for your project." Hfsdpfx Ajztkf Ieggen More items - new and used - can be found in our shop! International shipping costs on request!

Condition: good (used), functionality: fully functional, BDC 100T Hydraulic Moulding Press | Heated Platen Compression Press BDC 100T hydraulic moulding press for sale with heated platens. Approx. 100 tonne compression press for rubber, plastics, composites and laminating applications. Manufacturer: BDC Machine Type: 100T Moulding Press with Heated Platens Condition: Decommissioned. Good 100 Tonne Heated Platen Compression / Moulding Press This BDC 100T Hydraulic Moulding Press is a heavy-duty industrial press designed for heated platen moulding, compression moulding, forming, bonding and laminating applications. This machine is suitable for use in rubber moulding, plastics processing, composites, bonding, pressing, laminating and heated forming operations, making it a versatile addition to manufacturing, production and specialist fabrication workshops. Key Features 100 tonne hydraulic press capacity Heated upper and lower platens Heavy-duty industrial construction Suitable for compression moulding and heated platen pressing Ideal for rubber, plastics, composites and laminated materials Hydraulic pressing action for controlled force application Well-suited to production, R&D and workshop environments Hfsdpfszi Hchjx Aggon Machine Description The BDC 100T Hydraulic Moulding Press is designed for applications requiring high pressure and controlled heat. The heated platens allow materials to be formed, cured, bonded or compressed under consistent pressure, making the machine suitable for a wide range of industrial moulding and manufacturing processes. Hydraulic moulding presses of this type are commonly used for rubber moulding, plastic compression moulding, composite forming, gasket production, bonded components, laminating, hot pressing and specialist materials processing. Approximate Technical Specification General Manufacturer: BDC Machine Type: Hydraulic moulding / compression press Press Capacity: 100 tonnes Press Action: Hydraulic Construction: Heavy-duty industrial press frame Rams: 1 Guides: 4 Platen Type: Heated platens Platen Arrangement: Upper and lower heated work platens Working Applications Compression moulding Rubber moulding Plastic moulding Composite pressing Laminating Hot pressing Bonding applications Heated platen forming Production and workshop moulding work Heated Platen System Heating: Heated platen system Platen Size: 510 x 510mm Temperature Control: Fitted with platen temperature control Platen Use: Suitable for controlled heat and pressure applications Press System Power: Hydraulic press system Force: Approx. 100 tonnes Operation: Hydraulic pressing cycle Pump Size: 2.2kW Ram Diameter: 190mm Distance Between Guides: 540mm (Width) Max Daylight: 250mm Typical Configuration: Heavy-duty hydraulic moulding press with heated work platens Summary The BDC 100T Hydraulic Moulding Press is a 100 tonne heated platen compression press used for rubber moulding, plastic compression moulding, composite pressing, laminating, bonding and hot press applications. It features hydraulic pressing action and heated platens, making it suitable for industrial manufacturing, workshop production and specialist materials processing. Important Notice Note: Specifications and information provided in this listing are supplied in good faith; however, their accuracy cannot be guaranteed. Specifications are approximate.

Condition: used, This listing is for the Thermo Scientific A8150001 Gemini AS Heated Slide Stainer The unit is in full working condition and is ready for immediate use The Thermo Scientific Gemini AS Automated Slide Stainer (Model A81500001) is a high-performance staining system designed for histology and pathology laboratories requiring reliable and reproducible slide preparation. This automated staining instrument simplifies laboratory workflows by processing multiple slide racks simultaneously while maintaining consistent staining quality. The A81500001 model includes integrated heated stations, allowing slides to be dried efficiently during staining protocols. The Gemini AS supports a wide range of histological staining procedures and can be programmed for customised protocols, making it suitable for routine staining as well as specialised laboratory applications. Its high capacity and flexible configuration make it ideal for laboratories handling moderate to high sample volumes. With multiple reagent stations and automated timing control, the system reduces manual handling and ensures consistent staining results, improving overall laboratory productivity. Key Features Automated slide staining system for histology laboratories 5 heated stations for slide drying Capacity for up to 12 slide racks Hjdpfxoyuylhs Aggofn Each rack holds up to 20 slides Up to 26 reagent stations Programmable staining protocols Consistent and reproducible results Ideal for pathology, research, and clinical laboratories

Condition: used, This listing is for the Barkey Plasmatherm Laboratory plasma thawer The units are in full working condition and are ready for immediate use These items show very little signs of use Available in original packaging with manuals The Barkey Plasmatherm is a specialised laboratory and clinical device designed for the safe thawing and warming of fresh frozen plasma (FFP), blood components, and other infusion products. The system uses controlled dry-heating technology to ensure uniform and gentle thawing while maintaining the integrity of sensitive biological samples. Hfjdpeyufrgofx Aggsn Unlike traditional water baths, the Plasmatherm operates using a sealed temperature-controlled system that prevents direct contact between samples and water. This improves hygiene, reduces contamination risk, and simplifies maintenance. The device maintains precise temperatures typically between 37°C and 45°C, ensuring optimal conditions for plasma thawing and blood warming procedures. Safety is a key feature of the system, incorporating over-temperature protection, leak detection sensors, and visual and acoustic alarms to alert operators to any irregularities. A transparent lid allows continuous monitoring of the thawing process while the intuitive control interface enables easy operation and accurate programming of temperature and time settings. The Plasmatherm is widely used in hospital blood banks, transfusion services, and clinical laboratories where rapid, reliable, and hygienic thawing of plasma and blood products is essential. Its efficient design helps laboratories improve workflow while maintaining strict compliance with transfusion and laboratory safety standards.

Condition: used, This listing is for the Foster EcoPro EP700H G2 Pro Cabinet Freezer Hedpfeyrf Tlsx Aggsfn The unit is in full working condition and is ready for immediate use The Foster EcoPro EP700H Pro Cabinet Freezer is a professional laboratory-grade freezer designed for secure and efficient long-term sample storage. It provides stable low-temperature performance, energy efficiency, and a spacious interior suitable for scientific, medical, and research applications. Built with durable materials and advanced cooling technology, it ensures sample integrity while maintaining quiet and reliable operation. Ideal for laboratories, hospitals, and research facilities.

Condition: used, Vogt Maschinenbau Laboratory press / Hot press Vogt LABOPRESS P400S Hydraulic laboratory press with Siemens touch control 660 kN / Press area 400 × 400 mm / Year of manufacture 2019 For sale is a used laboratory press from Vogt Maschinenbau GmbH. The LABOPRESS P400S is designed as a hydraulic, stationary laboratory press for pressing processes under pressure and temperature and is suitable, among other things, for research, development, material testing, as well as applications involving plastics and composite materials. The machine features a Siemens SIMATIC HMI touch control, a closed protective hood and a LAN connection. Heating and cooling connections are available on the machine. Technical data Manufacturer: Vogt Maschinenbau GmbH Type: LABOPRESS Model / Order version: P400S Year of manufacture: 2019 Machine type: hydraulic laboratory press / hot press Max. pressing force according to manufacturer: 660 kN Working area: approx. 450 × 450 mm Usable pressing area: approx. 400 × 400 mm Clearance: approx. 198 mm Max. hydraulic pressure: 230 bar Water pressure: 6 bar Air pressure: 6 bar Connection power: 27 kW Rated current: 63 A Mains connection: 3 × 400 V / 50 Hz Temperature control Heatable press plates Manufacturer's specification for basic model: up to 300 °C Plate cooling possible via water Cooling water connections available on the machine Dimensions Manufacturer's dimensions (L × W × H): approx. 1,300 × 700 × 1,900 mm Working area: approx. 450 × 450 mm Usable pressing area: approx. 400 × 400 mm Equipment Siemens SIMATIC HMI touch panel PLC control Hydraulic four-column press unit Heatable press plates Water cooling / cooling water connections LAN interface Closed protective hood with viewing doors Emergency stop Manual / automatic operation Operating buttons for lifting / lowering Heating / cooling Application areas Material testing Plastics processing Rubber and elastomer testing Composite materials Pressing tests Research and development Quality assurance Prototype and sample production Condition Used Optical condition as shown in the pictures Weight: approx. 1000 kg Scope of delivery 1x Vogt LABOPRESS P400S laboratory press Hfodez Akm Repfx Aggen Equipment and accessories as shown in the pictures Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, This listing is for a Grant UBR2 Heat Block. The unit is in full working condition and is ready for immediate release. The Grant UBR2 Heat Block is a reliable and efficient heating solution designed for various laboratory applications, including DNA extraction, enzyme reactions, and sample incubation. With precise temperature control and a robust design, the UBR2 ensures consistent heating for optimal experimental results. Key Features: Temperature Range: Operates from ambient to 100°C, providing versatility for a wide range of applications. User-Friendly Controls: Equipped with a large LED display and intuitive controls for easy temperature setting and monitoring. Rapid Heating: Quickly reaches set temperatures, minimizing wait times and enhancing productivity in the lab. Uniform Heat Distribution: Designed with a high-quality aluminum block that ensures even heat distribution across all wells, promoting consistent sample heating. Versatile Block Compatibility: Accepts various block inserts (available separately) to accommodate different tube sizes and formats, making it adaptable for different experiments. Safety Features: Incorporates over-temperature protection and a safety cut-off feature to prevent overheating, ensuring safe operation. Applications: DNA & RNA Preparation: Ideal for use in molecular biology applications, including DNA extraction and purification processes. Enzyme Reactions: Perfect for incubating samples at controlled temperatures for enzyme assays and reactions, ensuring optimal conditions for activity. Sample Incubation: Suitable for incubating various samples, from cell cultures to biochemical assays, requiring consistent and reliable heating. Thermal Cycling: Can be used for specific thermal cycling applications where controlled heating is essential for reaction efficiency. Hfodsxxz Hyjpfx Aggon

Condition: used, This listing is for a Grant QBT1 Heat Block. Hfodpjxxz Uqjfx Aggon The unit is in full working condition and is ready for immediate release. The Grant QBT1 Heat Block is a compact, highly precise dry block heater designed for laboratory applications that require consistent temperature control. This unit is ideal for heating and incubating samples in 1.5 mL Eppendorf tubes, and it is known for its reliability and ease of use. Key Features: Wide Temperature Range: The heat block operates within a temperature range of ambient +5°C to 150°C, making it suitable for a variety of laboratory applications. Precision Temperature Control: With ±0.1ºC temperature stability at 37°C and uniformity of ±0.1ºC within the block and ±0.2ºC across similar blocks, it ensures accurate temperature maintenance for sensitive samples. Digital Display: The display has a 1°C resolution, allowing for easy monitoring and precise setting of the temperature. Heating Block Capacity: Equipped with a block for 24 x 1.5 mL Eppendorf tubes, it provides ample space for small sample incubation's, making it ideal for molecular biology and biochemistry experiments. Efficient Heating: The heat block has a heat-up rate of 40 minutes to reach the maximum temperature from ambient conditions. Compact and Portable: With dimensions of 205 x 180 x 122 mm and a weight of 3.6 kg, it is a compact unit that fits easily on a laboratory benchtop.

Condition: used, This listing is for a Techne Dri-block DB3 Heat Block . The unit is in full working condition and is ready for immediate release. The Techne Dri-Block Heater DB-3 is a highly efficient laboratory-grade heating device designed to offer precise temperature control for a variety of applications. Its robust features make it ideal for researchers and laboratory personnel seeking reliable heating solutions. Key Features: Temperature Range: The Dri-Block Heater DB-3 operates within a range from ambient temperature to 100°C (32°F to 212°F), accommodating a wide variety of heating needs. Fast Heat-Up Rate: The device can heat from 30°C to 100°C in approximately 15 minutes, reducing waiting time and increasing efficiency in laboratory workflows. Temperature Stability: It boasts impressive stability specifications, with a temperature accuracy of ±0.1°C at 40°C and ±0.15°C at 100°C. This precision is critical for experiments requiring exact temperature conditions. Temperature Setting: The user-friendly interface consists of three push-button controls paired with a 4-digit LED display, allowing users to set temperatures with a 0.1°C resolution for fine-tuning. Max Temperature Variation: Designed for uniform heating, the maximum temperature variation is limited to 0.2°C between blocks at 40°C, ensuring consistent results across different samples. Number of Blocks: The Dri-Block Heater can accommodate up to three aluminium alloy insert blocks, enabling simultaneous heating of multiple samples or different types of samples. Overall Size: The compact dimensions of the DB-3 are 279 x 260 x 105 mm (L x W x H), making it suitable for space-constrained laboratory environments while still providing ample heating capacity. Applications: The Techne Dri-Block Heater DB-3 is versatile and can be used for a range of laboratory and research applications, including: Incubation: Ideal for incubating biological samples under controlled temperatures. Boiling: Suitable for processes requiring boiling solutions efficiently. Inactivation: Useful for inactivating enzymes or pathogens in samples. Wet Ashing: A useful tool in sample preparation for elemental analysis. Sample Concentration: Facilitates concentrating samples by gentle heating. Enzyme Analysis: Maintains specific temperature conditions for enzyme studies. Nucleic Acid Hybridizations: Supports temperature-controlled hybridization necessary for nucleic acid experiments. Key Benefits: Precise Temperature Control: The high degree of control and stability ensures reliable results. Fast Heat-Up Rate: Saves time in laboratory procedures, enhancing productivity. High Temperature Stability: Reduces variability in experimental conditions, leading to more accurate outcomes. Lightweight and Compact Design: Fits conveniently in various lab settings, preserving valuable workspace. Hfjdpoxxz N Iofx Aggen Accepts Multiple Insert Blocks: Increases versatility by allowing customization based on specific protocols or sample types.