Used Lumberg Varicon 7000 Plus for sale (5,317)

Condition: new, maximum load weight: 36,500 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You will find our entire inventory of immediately and short-term available vehicles on our website. For a complete list of equipment, please enquire. SPECIFICATION: GOOSENECK: * Gooseneck in SNT design for improved platform length, approx. 3,700 mm long, rear with approx. 1,000 mm x 6° taper * For tractor units: 4 x 2 and 6 x 2 * ASPÖCK-UNIBOX * On the gooseneck and rear taper: open grating with 5 mm steel reinforcement * 2-inch kingpin * Guide plate from gooseneck for the fifth wheel, approx. 500 mm wide * Round NATO connector on the front panel (Maeler & Kaege VG 96 917) * On the gooseneck: 1 pair of removable ALU side panels, approx. 400 mm high, anodized finish * 1 LED work light each, left and right, mounted at the top of the front wall, wired to the coupling panel for the tractor unit CARGO AREA: * Platform length approx. 9,600 mm, with rear slope approx. 900 mm x 6° * Hydraulic lift/lowering section after gooseneck, length approx. 3,000 mm, rated for up to approx. 9,000 kg * Continuous open grating on lift bed and platform with approx. 5 mm steel underlay for reinforced point loading TYRES: 235/75 R17.5, 3PMSF, twin tyres. Make at our discretion * TPMS tyre pressure monitoring system compliant with ECE R 141 AXLES: * BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle steerable * 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually * 1st axle with starting aid * Technical axle load: 12,000 kg per axle Nwodpfjy Auhhex Aaaef * Air suspension with raise/lower valve HYDRAULIC LOADING RAMPS: * 1 pair of AXS steel ramps, two-part, open grating surface, length approx. 4,920 mm, width approx. 900 mm * Hydraulically folding ramp tips * Each ramp hydraulically adjustable by approx. 235 mm outward and approx. 365 mm inward * Strobe lights at ramp tips, switch positioned next to ramp controls * Ramp transport lock in driving position with quick-release * Painted non-slip coating on outer frame and ramp tip * Mechanical drop-leg side supports integrated in ramps, to assist with dock alignment * Ramp control valves on right side of vehicle BRAKE SYSTEM: WABCO EBS-E braking system, compliant with EU regulations SURFACE TREATMENT: * Entire chassis HRM metallized with ZINACOR 850 (85% zinc / 15% aluminium) for superior corrosion protection PAINTWORK: * Trailer body Carmine Red (RAL 3002) * Rims Silver Grey * Side walls Aluminium natural finish * Hub caps as per axle manufacturer * License plate holder Pure White (RAL 9010) EQUIPMENT: * Front wall made of steel, removable, approx. 1,600 mm high, incl. coupling panel for supply lines to tractor unit, mounted approx. 1,000 mm from the lower edge of the outer frame * Lashing chain anchor points inside left and right on front wall incl. aluminium trays below left and right for stowing chains or straps * Behind the front wall: approx. 12 mm thick DELIGNIT panel, bolted * Additional 2 pairs of bolted lashing rings (LC 5,000 daN) * Electric cable winch, approx. 5,400 kg pulling power, with remote control. Steel cable approx. 24 m long, 9.5 mm diameter, incl. cable pressure roller * Deflection pulley for the winch, with shackle and bolted lashing point

Condition: good (used), Year of construction: 2020, functionality: fully functional, For sale: WMF 5000-S-Plus fully automatic coffee machine. The machine is sold with all accessories shown in the pictures. Viewing is possible at any time by prior appointment, even at short notice. Nedpfsw S T Htex Aaaewf VAT can be stated separately!

Condition: used, Tenoning spindle 1 St. Number of milling agregates 1 St. Spindle diameter 40 mm Small-scale window manufacturing consisting of: ----- 1) Haberkorn FZS1 slotting machine. Price: €12,500 2) Okoma SF3F table milling machine with glazing bead saw. Price: €4 Oertli tooling for the Haberkorn and Okoma machines. Price: €7,500 1 set of wooden windows IV 68/78/88 and 1 set of wood-aluminum windows IV 68/78, manufactured in 2011 4) Götzinger OBM Plus corner hinge and olive drilling machine, Maco MultiMatic hardware. Price: €7 (Hardware can be converted for an additional charge upon request!) ----- Technical Manufacturer's Description: - Haberkorn FZS1 slotting machine with automatic feed, - Stepless height adjustment D 40 mm Crosscut saw: - Spindle arrangement: top - Three-phase motor: 3 kW - Spindle diameter: 30 mm - Speed: 2800 rpm - Saw blade diameter: 400 mm - Automatic brake with speed monitoring - Pneumatic horizontal positioning, manually adjustable - Guard and dust extraction hood with extraction port diameter: 100 mm Slotting spindle D 40 mm: - Power: 7.5 kW - Speed: 4200 rpm - Working length: 252 mm - Maximum tool diameter: 340 mm - 220 mm stroke, stepless height adjustment via Precision ball screws - Guard and dust extraction hood with extraction port diameter: 180 mm - Automatic brake with speed monitoring Studio table: - Swivel range +/- 65 degrees - Automatically changing counterweight (programmable) - Pneumatic clamp - High-precision electric degree indicator - Automatic length compensation - Counterweight at every angle setting in the cutting plane Optional equipment: - Laser for workpiece positioning - Pneumatic saw position - Length stop LA 2500 mm + 1850 extension ----- 2) Okoma SF3F table milling machine with lifting spindle, 3 tools - Dust extraction ports 2 x 120 mm - Spindle length 270 mm - Counter gauge with fine adjustment and turret - Triple stroke, maximum stroke height 90 mm - Glass strip cutting saw with protective and extraction hood, 80 mm diameter - 8-roller feed unit with stand and hold-down arm, required for the glass strip cutting saw attachment - Pneumatically controlled dispensing unit for edge drive, speed 6000 rpm - 2 x 3 kW motors - Mounting diameter 30 mm ----- 3) Oertli tools for Haberkorn and Okoma machines Nsdpfx Aaoxa Hi Noaowf - 1 set of wood window IV 68/78/88 - 1 set of wood-aluminum window IV 68/78 Tools are sold in the condition, scope, and with accessories as currently available in our stock. Note regarding window cuts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually available correspond to the systems mentioned and drawn. [Note regarding window cuts, tool drawings, and tool system listings:] ----- 4) Götzinger OBM Plus Corner Hinge and Olive Drilling Machine -Corner and scissor hinges + handle olive drilling -Vertical drilling unit with: -Quick-change drill head device -Pneumatic feed via foot valve -1x Olive drill head 24 mm -1x Double-head corner hinge -Maco MultiMatic fitting -1x Adjustable flip stop, left, with 6 stops -1x Adjustable flip stop, right, with 6 stops -1x Machine stand complete with storage tray -220/400 V, 60 Hz, 1.3 kW -1x Roller conveyor appr...

Condition: good (used), Year of construction: 2001, machine/vehicle number: NN7716, Maximum book size: 40cm X 27cm, Minimum book size: 12 cm X 9,5cm Maximum book block size: 40mm, Minimum thickness book block: 3 mm, Max.speed 1500 p/h 4 Clamps, Milling, Back and side gluing with hot melt Nsdpfx Aermkmrjaaswf

Condition: used, Year of construction: 2018, load capacity: 7,000 kg, fuel type: diesel, gearing type: automatic, Equipment: cabin, Manitou MRT 2470 plus Privilege #772691 in red Nedsytk Nbopfx Aaaswf Type: MRT 2470 Lifting capacity: 7,000 kg Power: 129 kW Color: red EXTRAS: Radio remote control included (see photo) Performance (Metric) Max. lifting capacity: 7,000 kg Max. lift height: 24.80 m Max. outreach: 20.50 m Dimensions l2 - Length to fork back: 7.55 m l1 - Overall length: 8.75 m b1 - Overall machine width: 2.49 m b7 - Overall width (stabilisers extended): 6.25 m h17 - Overall height: 3.05 m Wa3 - Outer turning radius (chassis): 6.50 m m4 - Ground clearance: 0.35 m a4 - Tilt angle: 12.30° a5 - Dump angle: 108.70° Standard tires: pneumatic Standard forks: 1200 x 130 x 60 mm Weight: 21,760 kg Stabilisers Type: Telescopic scissor supports Controls: Stabiliser operation, individual or simultaneous Drive Manufacturer: Mercedes Type / Emission standard: OM 934 E4-5 - Stage 4 / Final Tier 4 Power: 176 hp / 129 kW Max. torque: 750 Nm @ 1,500 rpm No. of cylinders / Displacement: 4 / 5,130 cm³ Injection: Direct Cooling: Water-cooled Transmission Type: Hydrostatic Tractive force: 9,500 daN Parking brake: Automatic negative Service brake: Hydraulic Hydraulics Pump type: Variable displacement Hydraulic flow: 180 l/min Pressure: 350 bar Tanks Hydraulic oil: 290 l Fuel: 290 l Exhaust treatment fluid AdBlue: 57 l Noise emission and vibration Operator station noise level (LpA): 79.70 dB(A) Ambient noise level (LwA): 108 dB(A) Hand/arm vibration exposure

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 3214, functionality: fully functional, workpiece height (max.): 40 mm, feed rate X-axis: 10 m/min, total height: 1,600 mm, total length: 3,700 mm, total width: 1,445 mm, overall weight: 1,080 kg, TECHNICAL DETAILS Feed speed: 10 m/min Panel thickness: 8 - 40 mm Max. edge thickness: 3 mm MACHINE DETAILS Operating length: approx. 100,000 m Dimensions & Weight Dimensions (L x W x H): 3,700 x 1,445 x 1,600 mm Weight: 1,080 kg EQUIPMENT/FEATURES PLC control including touchscreen Power stop/trimming knife Jointing unit with DIA milling tools Application of hot melt adhesive to workpiece Robust chain drive Upper operator panel, rapid adjustment from operator side Double roller pressure Signal lamp for workpiece feed Quick-heating glue pot, maintenance-free Pneumatic end trimming for edge thicknesses up to 3 mm High-frequency crosscut saw Nwjdpfx Ajy Hih Reaasf High-frequency milling unit with replaceable cutter heads For radius, straight and chamfer milling Workpiece air blower Integrated collection container for edge material offcuts Extendable support arm on the front side Note: The machine can still be inspected under power until the middle of calendar week 19.

Condition: used, functionality: fully functional, power: 92 kW (125.09 HP), fuel type: diesel, color: yellow, overall weight: 14,800 kg, tire size: 10.00 x 20, number of seats: 1, Year of construction: 2022, machine/vehicle number: 2477168, Equipment: all wheel drive, cabin, Year of manufacture: 2022 Engine: 92 kW (Isuzu) Weight: 14.8 t Dimensions (L x W x H): 7.89 x 2.41 x 3.04 m Reach: 9.24 m Digging depth: 5.93 m Tyres: 10.00 x 20 Displacement: 2.99 l Boom: VA Nodpfx Asy Hhkdsaajwf

Condition: used, fuel type: diesel, lifting height: 20,300 mm, Year of construction: 2014, Empty weight: 17.020 kg Nwodpfsv Ti I Esx Aaaef General condition: average Technical condition: average Visual appearance: average Delivery terms: EXW Please contact Christian Theißen for more information Manufacturer: Manitou Model: MRT 2150 Plus Year of build: 2014 Condition: Used Data: Max. lifting height: 20,32 m Lifting capacity: 4.999 kg Max. extension: 18,20 m Length forks: 1,20 m Drive type: Diesel Dimensions (without forks): LxB 6,89 x 2,43 m Building height: 3,08 m Rotation range: 360° (endlos) Own weight: 17.020 kg Total permissible weight: 17.400 kg Special features: All-wheel drive, all-wheel steering, connection for auxiliary equipment, supports, automatic attachment recognition. Location: 41468 Neuss immediately available

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Saw blade diameter: 290-300 mm Saw blade speed: 4750 rpm Motor power: 4.5/5.5 kW Motor speed: 2880 rpm Nedpfsy Dkg Nsx Aaaewf Max. cutting width: 5300 mm Max. cutting height: 2100 mm Max. panel height: 2200 mm Max. processing thickness: 80 mm Small parts support: Yes Transport dimensions approx. 7000 x 2000 x 2600 mm Weight approx. 1000 kg Availability: short-term Location: Röllbach

Condition: used, Year of construction: 1995, CNC Gantry Flame Cutting Machine Manufacturer: Messer Model: Omnimat P 7000 Year of manufacture: 1995 CNC control: Global Control Plus Track gauge: 7,000 mm Nsdpfx Aaeyay Dhsaswf 8 x oxy-fuel torches type ALFA 8 x Omnilift 200 Without rail track Without table Without filter 16426

Condition: excellent (used), mileage: 592,000 km, power: 162 kW (220.26 HP), first registration: 05/2008, fuel type: diesel, axle configuration: 4x2, fuel: diesel, fuel tank capacity: 7,000 l, color: white, gearing type: mechanical, emission class: euro5, suspension: steel-air, total length: 6,900 mm, total width: 2,500 mm, total height: 3,200 mm, Year of construction: 2008, Equipment: ABS, differential lock, electric window regulation, power mirror, = Additional options and accessories = - Differential lock - Air suspension - Air-suspended seats - Air horn - Radio/CD player - Rotating beacon - Disc brakes - Power take-off (PTO) = Further information = Front axle: Steering; Left tyre tread: 90%; Right tyre tread: 90%; Brakes: Disc brakes; Suspension: Leaf springs Rear axle: Twin tires; Differential lock; Inner left tyre tread: 70%; Outer left tyre tread: 70%; Inner right tyre tread: 70%; Outer right tyre tread: 70%; Reduction: Hub reduction axles; Suspension: Air suspension Number of cylinders: 6 gross vehicle weight: 15,000 kg Technical condition: very good Nedpfxsyywzlj Aaajwf Visual condition: good

Condition: used, Year of construction: 2021, total length: 7,010 mm, Articulated telescopic work platform Manitou 160 ATJ Plus Drive Diesel Year built 2021 Nwedpfoy Abhzex Aaaof Work height (mm) 16,210

Condition: new, Year of construction: 2025, total length: 3,700 mm, Vertical mast platform JLG Toucan 12E Plus Drive Diesel Year built 2025 Work height (mm) 12,650 Nodpfx Aey Abhnjaaowf

Condition: new, Year of construction: 2025, total length: 10,130 mm, Telescopic work platforms Manitou 220 TJ Plus Drive Diesel Nedpoy Abgqefx Aaaowf Year built 2025 Work height (mm) 21,740

Condition: used, Year of construction: 2001, Lippert belt conveyor inclined belt GF 7000-650-500 RA1480 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 7000 mm (upper straight 1000mm + arch 500mm + inclined belt 5500mm) Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 81 mm Nwsdek Abckopfx Aaaof Belt: Type HSL 8 E Year of construction: 2001 Slope / Slope: adjustable Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Lippert belt conveyor GF 6870-900-800 RA2106 Technical data: Conveyor length (NL): 6870 mm frame width (NB): 900 mm belt width (GuB): 800 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Njdpfxspdv N Eo Aaaowf Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 1998, Lippert Rising falling Incline belt conveyor GF 7000-900-800 RA2055 Technical data: Conveyor length (NL): 7000 mm (4960 mm + 700 mm + 1340 mm) frame width (NB): 900 mm belt width (GuB): 800 mm Overall height (BH): 120 mm, 430 mm with motor Angle: about 15° ( 2 x 7,5° ) Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Nwodpfx Aonm Ia Ijaajf Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Lippert Belt Conveyor Riser with Arch and Straight GF 7000-650-500 RA1368 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 7.000 mm (riser 4080mm + bow 500mm + upper straight 2420mm) Frame width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm Support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Drive drum: Ø = 64 mm Deflection roller: Ø = 34 mm Belt type: HSL 8 E year of construction: 2001 Pitch: adjustable Optionally available: Supports Nwedpfx Aaek Aa S Tsasf Side guide one and both sides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: excellent (used), Offer consisting of: Polar 78 N Plus, year of manufacture 2017, incl. spare knife, incl. side air tables (Resopal, 75x75 cm), very clean machine, inspection possible. Nwsdpfx Aoy Aicgoaajf

Condition: used, Year of construction: 2008, functionality: limited functionality, machine/vehicle number: 6034, travel distance X-axis: 7,200 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 590 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, nominal power (apparent): 45 kVA, controller manufacturer: HEIDENHAIN, controller model: Bahnsteuerung iTNC 530, total height: 2,900 mm, total length: 12,500 mm, total width: 4,810 mm, overall weight: 14,000 kg, spindle speed (min.): 100 rpm, spindle speed (max.): 12,000 rpm, operating pressure: 7 bar, The BZ 7000 is designed exclusively for milling, drilling, countersinking, reaming, and thread cutting of metals, aluminum, plastics, and wood (chipboard and solid wood). URBAN CNC Machining Center BZ 7000 • Year of manufacture: 04/2008 Nsdpfoyzxfnex Aaaewf • Control: HEIDENHAIN path control iTNC 530 • 4 axes • Travel paths X / Y / Z axis: 7200 / 450 / 590 mm • Working area X / Y / Z axis: 7000 / 400 / 350 mm • Weight: 14 t Equipment: - Robust base frame in welded steel construction - Ball rail guides on all axes - Milling spindle unit: 100 - 12,000 rpm, tool mounting SK 40 Drives: - X-axis (50 m/min) via rack and pinion drive - Y/Z-axis (25 m/min) via ball screw drive - B-axis: 9000°/min - Swiveling control panel - Automatic central lubrication - Traveling tool changer for 12 SK 40 tool holders - Coolant emulsion system - Machine lamp - Safety fence - Electronic handwheel integrated into the control panel - Chip drawers - Laser scanner - Minimum quantity lubrication system Technical Data: - Compressed air connection: R 3/8" / 6 bar - Device connection: R 1/4" - Operating pressure: approx. 6 bar - Air consumption per cycle: approx. 600 l/min at 6 bar - Electrical connection: 3 x 400 V +/- 5% / 50 - 60 Hz - Control voltage: 24 V DC - Rapid traverse X-Y-Z: 50 – 25 – 25 m/min - Infinitely variable feed: 0 - 5000 mm/min - Tool changer: disc-type changer with 12 SK 40 stations - Tool holder: SK 40 - Tool clamping: hydraulic - Coolant device: emulsion, 300 l - Spindle speed: 100 - 12,000 rpm - Speed adjustment: 80 – 120% - Drilling capacity in St 60 / aluminum: up to 28 mm Ø - Thread cutting capacity in St 60 / aluminum: up to M24 - Measurement system: rotary encoder/linear measurement system - Positioning accuracy: 0.025 mm - Repeat accuracy: 0.015 mm - Control: HEIDENHAIN iTNC 530 M, 4 controlled axes - Data interface: V 24/RS - 232 - C - Travel range X / Y / Z axis: 7200 / 450 / 590 mm - Working area X / Y / Z axis: 7000 / 400 / 350 mm - Space requirement including safety fence: approx. 60 m² (12.5 x 4.8 m) - Machine weight with accessories: approx. 14 tons - Sound emission: average sound pressure level 79 dB (A)

Condition: as good as new (ex-display), Year of construction: 2025, Schiavo Top 1600.4 Max. Glas-height: 1.600 mm Thickness: 3-19 mm Prewashingzone / Mainwashingzone / drying zone Stainless steel body 4 brushes (120 mm) maid out of one piece with Nodpfxjvxf Uxs Aaajwf Incl. water tanks incl. vacuum system for drying zone LED lights on the outled for inspection

Condition: good (used), Year of construction: 2015, operating hours: 899 h, mast type: telescopic, lifting height: 10,650 mm, fuel type: electric, Year of manufacture: 2015 GVW: 4.900 kg Dimensions (LxBxH): 365 x 120 x 199 cm Lifting capacity: 200 kg Working height: 1.265 cm Technical condition: good Visual appearance: good Nwjdsyywxdepfx Aaaef Please contact Ton for more information Manufacturer: JLG Type: Toucan 12E Plus Year of manufacturing: 2015 Weight: 4.900 KG Hourmeter: 899 Drive: Electric, 4x2 Product number: 25041 Platform height: 10,65 m Working height: 12,65 m Platform measurements: 70x105 cm Maximum outreach: 6,7 m Total measurements LxWxH: 365x120x199 cm Max. platform load: 200 KG Machine is technically in good condition. Fitted with good batteries. Documents incl. CE. Price: € 17.950,- excl. VAT, available from our warehouse in Hedel, The Netherlands. Delivery/transport is possible, ask for price. Keywords: Hoogwerker Schaarlift Schaarhoogwerker Telescoophoogwerker Knikarmhoogwerker Genie JLG Haulotte Skyjack Upright Manitou Hinowa Niftylift Aichi Snorkel Omme Scissorlift Boomlift Articulated Platform Arbeitsbühnen Scherenbühne

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: OE-70109, grinding wheel diameter: 760 mm, grinding spindle speed: 2,200 rpm, workpiece spindle speed (max.): 500 rpm, clamping length: 2,600 mm, tailstock quill stroke: 60 mm, No minimum price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the item within one of the following periods: either between 11/05/2026 and 13/05/2026, or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Maximum grinding spindle speed: 2,200 rpm Workpiece spindle speed: 20–500 rpm Maximum workpiece swing diameter: 850 mm Maximum clamping length: 2,600 mm Maximum workpiece weight: 500 kg Maximum grinding wheel diameter: 760 mm Grinding wheel bore diameter: 304.8 mm Peripheral speed: 45 m/s Workpiece spindle mount: Morse taper 6 Tailstock quill stroke: 60 mm Grinding spindle head: X-axis infeed Z-axis feed MACHINE DETAILS Control model: FANUC SERIES OI-TF Operating voltage: 400 V Frequency: 50 Hz Rated current: 3 x 100 A Connection: 63 kVA Dimensions & Weight Dimensions (L x W x H): 5,000 x 4,500 x 2,900 mm Machine weight: 9,000 kg Njdsym Axnspfx Aaaowf EQUIPMENT XACTOOLS manufacturer's robot cell with loading unit EPSON industrial robot, maximum payload: 8 kg Vibratory bowls Documentation External reference: Lot 35 / Blickle

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 22320321, total height: 2,300 mm, total width: 1,200 mm, total length: 1,300 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 300 mm, overall weight: 1,000 kg, Equipment: documentation/manual, MITUTOYO CRYSTA-PLUS M 574 coordinate measuring machine Nwedoym R S Njpfx Aaasf - incl. granite measuring plate - plate dimensions: 1200 x 840 mm - incl. documentation, calibration sphere, probe, and hardware Attention: The item must be definitively collected between 21.04. and 30.04.2026, on a date yet to be agreed upon. FCA D-96257 Marktgraitz – loaded on truck

Condition: used, Year of construction: 2016, operating hours: 1,476 h, functionality: fully functional, Hello, we are offering a Hurco VM 30 i Plus for sale here. Travel: X-axis: 1270 mm Y-axis: 510 mm Nwodsyhw Easpfx Aaaof Z-axis: 510 mm Control: Max5 Taper: SK-A40 Max spindle speed: 12,000 rpm Transport weight: 4,550 kg If interested, please call. Sale on behalf of customer.