Used Loewer Dsm 2004 for sale (1,100)

Condition: used, Year of construction: 2004, Makino A66E with Fastems 10 pallet system built in container. Length of the working table 500.4 mm Width of the working table 500.4 mm Maximum table load 700 kg Antalet verktyg i magasinet 136 st Nwodpfxey D Siro Amnjg Maximum spindle speed 14000 rpm Travel length X-axis (mechanical feed) 729 mm Travel length Y-axis (mechanical feed) 729 mm Travel length Z-axis (mechanical feed) 797.6 mm Maximum feed rate in X-axis 1250.1 mm/s Maximum feed rate in Y-axis 1250.1 mm/s Maximum feed rate in Z-axis 1250.1 mm/s

Condition: used, Year of construction: 2004, Book stacker Kolbus DS 391 Year: 2004 Nsdjypmrdjpfx Amnswg For stacking of books. Universally usable as stacker and emergency delivery Description: - Turning device - Pass-through stacker - Straight delivery Max. mechanical speed: up to 65 cycles/min Maximum size range: 382 x 305 x 80 mm Minimum size range: 100 x 100 x 4 mm Maximum pile height: 325 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: new, * IMMEDIATE AVAILABILITY * Including drive-on ramp / mesh extension / lashing rings Technical data: • Type: New vehicle • TÜV: New/2 years • Availability: IMMEDIATE! • Permissible total weight: 2000 kg • Unladen weight: approx. 450 kg • Payload: approx. 1,550 kg • Internal dimensions: 255 x 145 x 39+53 cm (L x W x H) • Overall exterior dimensions: 395 x 192 x 152 cm (L x W x H) • Loading edge height: approx. 52 cm • Tyres: 13” steel wheels • Brake: yes • Jockey wheel: yes • 100 km/h approval: for additional charge Nedpfx Aeyyw Ryemnewg • Including vehicle documents Superstructure: • Floor: Wood, 15 mm phenolic plywood • Sidewalls: Steel • Sidewall height: 39 cm • Chassis: Low-loader, rubber torsion axle • Folding sidewalls: Large drive-on ramp at the rear • Hydraulic system: no • Overrun device & brakes: Knott • Frame/chassis: V-drawbar • Extension: Mesh extension included in price • Locks: Over-centre latch • Lashing eyes: 6 recessed in floor • Supports: available at extra cost • Electrical connector: 13-pin • Registration: ZBII & CoC documents Standard equipment: • Galvanised steel side panels • Rear sidewall foldable • Wooden floor • Corner stanchions with insertion options for extensions or mesh • Maintenance-free rubber suspension axles • Axle with continuous axle body and independent wheel suspension • 6 internal recessed lashing rings in the floor • Rear access ramp • Over-centre latch • Removable mesh extension • Tarpaulin buttons for cargo net or flat cover • Overrun brake by Knott • Automatic reversing system • Sturdy V-drawbar • 13-pin connector • Reversing light • Large dimensioned safety lighting • Integrated rear fog lamp • Rear frame integrated lighting • Registration documents: Vehicle registration certificate (ZBII) & CoC documents Optional accessories - inquire for details: • Perforated railing on sidewall • High front mesh • High cover • Sideboard extension • Spare wheel • Storage box • Rear support legs • Ramps • Flat cover • Additional lashing eyes • Slotted-hole rails for lashing straps & load bars • Rubber-coated lath strips for lashing straps & load bars • Reversing lights • Lashing straps • and much more New vehicle with warranty and TÜV. ————— - Financing or leasing available - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or temporary number plates (Germany) can be provided - Export number plates including customs declaration available Descriptions and images are copyright protected! Trailer Centre BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available from us! We have been a specialist dealer & repair workshop for over 30 years for Brian James / Blyss / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Errors, mistakes and prior sale excepted -

Condition: new, * IMMEDIATELY AVAILABLE * Including mesh extension and lashing rings. Technical data: • Type: New vehicle • TÜV: New/2 years • Availability: IMMEDIATELY! • Permissible total weight: 2,000 kg • Unladen weight: approx. 350 kg • Payload: approx. 1,650 kg • Internal dimensions: 255 x 145 x 39+53 cm (L x W x H) • Overall external dimensions: 395 x 192 x 92 cm (L x W x H) • Loading height: approx. 52 cm • Tyres: 13 inch steel rim • Brakes: yes • Jockey wheel: yes • 100 km/h approval: available at extra cost • Including vehicle documents Vehicle specification: • Floor: Plywood, phenolic resin coated, 15mm • Side panels: Steel • Side panel height: 39 cm • Chassis: Low loader, rubber suspension axle • Foldable side panels: rear • Hydraulics: no • Overrun device & brake: Knott • Frame/chassis: V-shaped drawbar • Extension: Mesh extension included in price • Latches: Lever latch • Lashing eyes: 6, recessed in the floor • Support legs: available at extra cost • Lighting plug: 13-pin • Registration: ZBII & COC documents Standard features: • Galvanized steel sheet side panels • Rear side panel foldable • Wooden floor • Corner posts with insert option for extensions or mesh sides • Maintenance-free rubber suspension axles • Axle with continuous axle body and independent wheel suspension • 6 internal, floor-recessed lashing rings • Lever latch • Removable mesh extension • Tarp buttons for cargo net or flat cover • Knott overrun brake • Automatic reverse system • Robust V-drawbar • 13-pin connector • Reversing light • Large-size safety lighting • Integrated rear fog light • Lighting recessed in rear frame • Registration documents: Registration certificate (ZBII) & COC papers Options & accessories (retrofittable – please enquire): • Slotted rail on side panel • High front mesh Nedpfx Amoyyw Rtenjwg • High tarpaulin • Side panel extension • Spare wheel • Toolbox • Rear support legs • Ramps • Flat cover • Additional lashing points • Slotted-rail tie-down system for straps & load bars • Rubber-coated slat rail for straps & bars • Reversing lights • Lashing straps • and much more New vehicle with warranty and TÜV. ————— - Financing or leasing available - Nationwide delivery available - Advance dispatch of registration documents or provision of temporary (transfer) plates within Germany possible - Export license plate and customs clearance available Descriptions and images are copyright protected!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available from stock! For over 30 years we have been specialist dealers and repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many other brands. - Errors, omission, and prior sale reserved -

Year of construction: 2023, condition: used, functionality: fully functional, Schwamborn Concrete Processing Machine DSM 450 2,2 kW 400 V/50 Hz DSM 450 2,2 kW — Year of manufacture 2023 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Nedpfxey A E S Ro Amnjwg Condition & Notes: - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational - Product photos to follow — please contact us for current images - On-site inspection in 37574 Einbeck available by appointment Price EUR 2,300 plus VAT | EXW Einbeck | Delivery upon request

Year of construction: 2022, condition: used, functionality: fully functional, Schwamborn Concrete Processing Machine DSM 250S 230 V DSM 250S — Year of manufacture 2022 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Condition & Notes: - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational Nwedpfxjy A E Ife Amnjg - Product photos to follow — please contact us for current images - On-site inspection in 37574 Einbeck available by appointment Price EUR 4,700 plus VAT | EXW Einbeck | Delivery upon request

Condition: used, Year of construction: 2006, 2006 | Mercedes-Benz Actros 3241 K 8x4 2004 RSP ESE 32 / 7-2 Double Turbine | Used Suction Excavator | 204214 kms 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 57000 or Make an Offer. Nwjdpsx Rpdmjfx Amnog Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 32 inspection points 30 approved ✅ 0 imperfect ℹ️ 2 issues ⚠️ 📌 Inspector's Comment: Machine was working at the time of inspection, except as noted. Could not fully test vacuum hydraulic arm, (because of a fault in one of the cylinders). There is some oil residue around the PTO pump. Suction hose diameter 250 mm, max volume flow 3'000 m3/h, max vacuum pressure 47'000 Pa, side tipper discharge, filter system (40 cartridge filter with automatic cleaning, 6000mm range), remote control: yes, main tank size 10 m³, Air compressor system: max 4.5 m3/min, 7 bar 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "31334 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2004, ORT RP30 C thread rolling machine 2-roll 30 tons electronic control of speed and position. Brushless motors for the rotation of the rollers Possibility to memorize the parameters for the piece. The machine is visible working in our warehouse in Gussago BS. Test possibility Mimu Machine Tools Rolling is a mechanical processing without chip removal that can be performed cold or hot, having as an aim the improvement of the surface finish (therefore the apathetic behavior of the material. Power (Ton): 30 Number of rollers: 2 PLC: YES Nwodjyzt T Tepfx Amnog

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, power: 1 kW (1.36 HP), Simar FX 2004 Material Handling Device Motor power: approx. 0.9 – 1.1 kW (brush motor) Power supply: 230 V / 50 Hz Container volume: approx. 3 – 4 liters Conveying capacity: approx. 60 – 100 kg/h Hose connection diameter: 38 mm (standard) Filtration: Polyester filter with automatic cleaning Simar FDX-2 Dye Dosing Unit Drive type: Stepper motor (high rotational speed repeatability) Nodpfx Aey Hldnjmnowg Power supply: 230 V / 50 Hz Speed: Continuously adjustable (depending on the control unit, typically 0.1 – 200 rpm) Dye container capacity: approx. 5 liters

Condition: used, Year of construction: 2004, Speed 60 m/min Nedoyll D Ropfx Amnswg 8 workstations Digital positioning Chrome table Thrust bearings Lubrication 400V

Condition: used, Year of construction: 2004, Overview This stretch blow moulding machine was manufactured in 2004 by German company KRONES. The machine is a CONTIFORM S8, designed for PET bottle production and configured for PCO 1881 and Alaska neck finishes. The blow moulder is immediately available. Technical data  Capacity: Max. 13,600 bph Formats: 0.50 L 1.00 L 1.50 L Neck finish: PCO 1881 Alaska Number of cavities: 8 moulds Operating hours: Approx. 35,000 h Scope of Delivery  KRONES CONTIFORM S8 stretch blow moulding machine Preform hopper and feeder Chiller 6 sets of moulds Spare parts Nodpfx Amsylacusnewg

Condition: good (used), Year of construction: 2004, Demag Concept 125/475-320 Clamping force: 125 tons Distance between tie bars: 475 x 475 mm 2 x core pullers on movable platten \+ Robot Demag W621-1831: X-550, Y-1000,Z-2000 (2004) Nwsdpsxd Sz Eofx Amnjg

Condition: used, Year of construction: 2004, Capacity 3000kg Diesel Fuel 15.428H Nwodpfoyhnk Sox Amnog Translation Heating

Condition: new, Number of sanding units 2 St. sanding width 290 mm Sanding height max. 180 mm LÖWER-DoubleSander Solid DSM 3000 ----- Two-sided single wood sander for sanding Solid wood such as window wood etc. Stable Top version with long casting tables, brushing and finishing device and conveyor belt feed. Suitable for high Permanent load even with higher chip removals. - Staggered sanding and finishing units at the top and below - directly driven rubberized sanding rollers for slip-proof free power transmission - Combined grinding via roller and shoe for high chip removal with a flat intervention zone at the same time - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - Integrated brushing and finishing device with large Grinding dust extraction - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, 1000mm long cast iron tables with a finely planed surface and spring-loaded Pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor infinitely variable for quick adaptation to different types of wood - all motors electrically protected - Ergonomically arranged controls on the workpiece inlet side - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 300mm - Working width 290mm - Grinding thickness 2-180mm - two brake motors for 7.5 kW drive - Feed motor 1.0 kW - Feed speed 4-20 m/min. - automatic height adjustment 0.37 kW - two brush units of 0.37 kW each with fiber brushes D 120 x 300mm - Suction nozzles 2 x 120mm and 2 x 150mm - Pneumatic connection 6 bar - Working height 850mm - Length 2105mm - Length with control panel 2490mm - Width 980mm - Height 1910mm - Weight approx. 1650 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version Nwodpjyrty Tefx Amnog ----- Price of the above machine on request! ----- Special accessories with additional costs: Workpiece blow-off - using nozzles from above and below at the machine outlet arranged, pneumatically controlled Sanding belt blowout via nozzles directly on the radii of the tension rollers inside the suction arranged, timer controlled on/off 5 seconds each, can be switched on separately Disc unit for defibering - two gr...

Condition: new, Number of sanding units 4 St sanding width 190 mm Sanding height max. 2 - 180 mm LÖWER - DoubleMaster DSM 2000 DB ----- Double-sided single wood sander with additional Transverse brush sanding unit (discs) and Longitudinal brush sanding unit (roller) for sanding Solid wood such as B. window wood etc. Stable top version with long cast tables and Conveyor belt feed. Suitable for high continuous loads even with higher chip removals. 1. Belt sanding unit with CERMET sanding shoe pre-sanding Nedpfx Amoyrty Hjnowg 2. Disc aggregate cross grinding for defibering 3. Rolling aggregate longitudinal grinding for directional finish Direction of growth - Staggered sanding and finishing units at the top and below - directly driven rubberized sanding rollers for slip-proof free power transmission - Combined grinding via roller and shoe for high chip removal with a flat intervention zone at the same time - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - integrated brush grinding device (transverse and Longitudinal) with sanding dust extraction - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, 1000mm long cast iron tables with a finely planed surface and spring-loaded Pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor infinitely variable for quick adaptation to different types of wood - all motors electrically protected - ergonomically arranged controls on the Workpiece inlet side - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 200mm - Working width 190mm - Grinding thickness 2-180mm - two brake motors for 5.5 kW drive - Feed motor 1.0 kW - Feed speed 4-20m/min. - automatic height adjustment 0.37 kW - Brush sanding units Disc D=max. 200mm Roller D=max. 270mm - Suction nozzles 2 x 120mm and 2 x 180mm - Pneumatic connection 6 bar - Working height 870mm External dimensions: - Length 2600mm - Length with wheels 2985mm - Width 880mm - Height 1910mm - Weight approx. 1500 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version ----- Price of the above machine on request! ----- Special accessories with additional charge: Workpiece blow-off - ...

Condition: good (used), Year of construction: 2004, load capacity: 3,000 kg, lifting height: 4,600 mm, fuel type: diesel, mast type: duplex, construction height: 3,000 mm, Hyster H3.00XM Duplo 460 Sideshift / Cascade Fork Positioner Perkins Diesel 2004 Nwsdeynactepfx Amneg Video can be sent via Whatsapp. Ongoing stock, see website. Prices are ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices and sold AS-IS without warranties (see our general conditions). To arrange a viewing and/or test drive you can make a non-binding appointment. Please call in advance, as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, Year of construction: 2004, Used Horizon VAC-60Hc Collator, used The Horizon VAC-60Hc is a powerful collator designed for efficient and reliable paper handling in professional print finishing environments. Key Features: - Loading capacity: 130 mm per bin - Modular design: Tower with 6 feed stations, expandable up to 6 towers for a total of 36 stations - Suction and air-blow technology: Uses Horizon's advanced technology for consistent and reliable sheet feeding with various paper types and weights - Versatile paper processing: Handles sheets from 148 x 120 mm to 500 x 350 mm, with paper weights from 40 to 250 g/m² - High production speed: Up to 9,500 sets per hour, depending on paper size and configuration Nwedpfx Ajxgd Szjmnjg - User-friendly operation: Intuitive interface for easy job setup and control - Advanced error prevention: Equipped with miss-feed, double-feed, and jam detection for improved accuracy and reliability - Job memory: Ability to store recurring jobs for increased efficiency Technical Specifications: - Dimensions: 842 x 652 x 1,961 mm - Weight: 310 kg - Power supply: 230V, 50/60Hz - 1.86kW All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, Year of construction: 2004, Heidelberg TAL 400 Year: 2004 Description: - Horizontal signature feeders: 1 - Incl chain track Nodpfx Aox Tdpiemnowg - Excl. chain - Excluding pump(s)

Condition: used, Year of construction: 2004, Heidelberg TAL 400 Year: 2004 Description: Nwsdpsx Tdn Sjfx Amnjg - Horizontal signature feeders: 1 - Incl chain track - Excl. chain - Excluding pump(s)

Condition: used, Year of construction: 2004, Heidelberg TAL 400 Year: 2004 Description: - Horizontal signature feeders: 1 Nwedpfxsx Tdn Eo Amnsg - Incl chain track - Excl. chain - Excluding pump(s)

Condition: used, Year of construction: 2004, Heidelberg TAL 400 Year: 2004 Description: - Horizontal signature feeders: 1 - Incl chain track Nsdpfx Amsx Tdnxsnowg - Excl. chain - Excluding pump(s)

Condition: used, Year of construction: 2004, Heidelberg TAL 400 Year: 2004 Description: - Horizontal signature feeders: 1 Nwjdpfx Amex Tdmueneg - Incl chain track - Excl. chain - Excluding pump(s)

Condition: used, Year of construction: 2004, Overview  The swing top closing machine was built in 2004 by the German manufacturer Rico. The machine is still in operation and can be inspected at any time.  Technical data  Output: 12,000 bottles/h  Formats: 0.33 l (Steinie bottle)  14 capping stations  Running direction: clockwise Touch panel for operation  Control system: Siemens S7  Nwsdoqqz T Rjpfx Amnjg

Condition: used, Year of construction: 2004, Overview This complete filling line for returnable glass bottles was manufactured between 1993 and 2004 by several well-known European producers, mainly Klann, Klinger, Krones, Nate, and Datz. The line is designed for high-capacity beverage production, handling up to 20,000 bottles per hour in different formats.  It includes all components from decrater to crater. The line is for it´s age in a good condition. The labelling machine was maintained in 2023 completely. It remains installed and connected and can be inspected upon request. Technical Data Capacity: up to 20,000 bph Bottle Formats: 0.25 L Vichy, 0.5 L Set 1–3, 0.7 L GDB, 0.75 L GDB Application: Water, CSD, or other beverages in returnable glass bottles Condition: Line in good condition Availability: Immediate Status: Still installed and connected   Scope of Delivery Decrater | Otto Fleischer | 1993 Crate washer | Klann | 2,000 crates/hour | 1997 | GDB crates, stainless steel Bottle washer | Klinger | 1993 | Stainless steel, multi-zone, steam extraction, dosing system Empty bottle inspector | Krones | up to 50,000 bottles/hour | 2004 | Linatronic system Filler | Nate-Veral 60 | 20,000 bottles/hour | 2004 | glass bottles, without closer Capper | Datz | 20,000 bottles/hour | 2004 | 8-head Solo SV, left–right working direction Swing-top capper | Datz | 20,000 bottles/hour | 2004 | 24-head BVM-24R, swing-top closure Labeller | Krones | up to 20,000 bottles/hour | 2004 | Prontomatic, 2 stations, Checkmat inspection Crater | Otto Fleischer | 1993 | ROTA 1 E, automatic case packer Nodpfoyb R Uaex Amnewg

Condition: used, Year of construction: 2004, Overview  The empty bottle inspector was built in 2004 by the German manufacturer Krones. It is installed in a mineral water company in Germany. On the line, where it is installed, the owner also does contract bottling. Therefore it has many detections and formats available. Technical details  Output: up tp 50,000 bph Last used for:  0,25 l Vichy bottle 0,5l Set 1 0,5l Set 2 0,5l Set 3 0,7l GDB 0,75l GDB Inspection modules Bottom inspection camera Sealing surface inspection camera Thread inspection camera with cone optics Side wall inspection camera Contour detection and color detection with camera Accessories/scope of delivery    Ejector some spare parts available some conveyors Nodpfx Aoxch Acemnewg