Used Loewer Dsm 2004 for sale (1,085)

Condition: new, Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm LÖWER-DoubleSander Solid DSM 2004 ----- Double-sided four-belt single wood sander for Sanding solid wood such as window frames etc. Highly stable top design with innovative details. Suitable for high continuous loads even with higher chip removals. - sanding units arranged one after the other for pre-grinding, Fine sanding and finishing sanding, each from above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and shoe 3. Finishing unit with fiber brush - Directly driven grinding rollers for slip-free Power transmission - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - Integrated brushing and finishing device with large Grinding dust extraction Itodpfxovnv Tqo Amiog - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, cast tables Finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor with stepless speed 4-20 m/min - all motors electrically protected - ergonomically arranged controls - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 200mm - Working width 190mm - Grinding thickness 2-180mm - four brake motors for 5.5 kW drive - Feed motor 1.5 kW - Feed speed 4-20 m/min. - automatic height adjustment 0.37 kW - two brush units with fiber brushes D 120 x 200mm at 0.37 kW - Suction nozzle 2 x 180mm 2 x 120mm - Extraction air speed 20 m/s - Pneumatic connection 6 bar - Working height 870mm - Length (with soft disc 2740mm) 2600mm - Length with control panel (with soft disc 3035mm) 2985mm - Width 880mm - Height 1910mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version ----- Price of the above machine on request! ----- Special accessories with additional charge: Workpiece blow-off - using nozzles from above and below at the machine outlet arranged, pneumatically controlled 4-belt sanding belt blowout via nozzles directly on the radii of the tension rollers inside the suction arranged, timer controlled on/off 5 seconds each, can be switched on separately Di...

Condition: used, Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm Control ja weight 3300 kg Dimensions (L/W/H) 2600x920x1890 mm Dust suction hood 2x180, 2x120 mm Löwer DSM 2004 Double-Sided Sanding Machine ----- 4-Belt Sander + Disc Unit (Top/Bottom) Manufacturer's Description: ----- Double-sided, four-belt, single-wood sander for sanding solid wood such as window frames, etc. Highly stable, top-quality design with innovative details. Suitable for high continuous loads, even with high material removal rates. - Sequentially arranged grinding units for roughing, fine grinding, and finishing, each from above and below 1. Belt grinding unit with heavy steel roller 2. Belt grinding unit with rubberized roller and shoe 3. Finishing unit with fiber brush (see optional equipment below) - Direct-drive grinding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated grinding shoes with very good thermal conductivity and absolute dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer belt life - Forced pneumatically controlled grinding belt oscillation - Effective grinding dust extraction directly at the grinding rollers - Airborne dust extraction at the tension rollers - Integrated brushing and finishing unit with large grinding dust extraction - Motorized grinding thickness adjustment via precision threaded spindles and large linear ball bearing sets on hardened and ground precision shafts with dust and Dirt protection Iedpfx Amsvu Hgbeietg - Chip removal adjustment at the bottom via precision threaded spindle with dimension display via scale ring (0.1 mm resolution) - Sanding belt tension via pneumatic cylinder with constant tension pressure - Sanding belt change with pneumatic belt release in seconds - Sanding belt tracking adjustment during belt change - Electropneumatic compressed air monitoring - Infeed protection via contact roller for workpieces that are too thick - Workpiece transport via calibrated, non-slip and adhesive conveyor belts over heavy-duty cast iron tables with a finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent workpiece transport - Geared feed motor with infinitely variable speed 4-20 m/min - All motors electrically protected - Ergonomically arranged operating elements - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: ----- - Sanding belt speed 22 m/s - Sanding belt length 1800 mm - Sanding belt width 200 mm - Working width 190 mm - Sanding thickness 2-180 mm - Four brake motors for drive 5.5 kW - Feed motor 1.5 kW - Feed speed 4-20 m/min - Automatic height adjustment 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm at 0.37 kW each - Extraction ports 2 x 180 mm, 2 x 120 mm - Extraction air velocity 20 m/s - Pneumatic connection 6 bar - Working height 870 mm - Length (with soft disc 2740 mm) 2600 mm - Length with control unit (with soft disc 3035 mm) 2985 mm - Width 880 mm - Height 1910 mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE compliant Equipped with the following special options: -----...

Condition: good (used), Year of construction: 2002, functionality: fully functional, Veneer sanding unit, 4 kW, 400 Volt, oscillation, running gear, motor power 2.2 kW, 4-roller feed, Haffner infinitely variable feed, sanding belt 2640 x 150 mm, table 960 x 460 mm, tilting range 45°-90°, Itedpoyayutofx Amieg 2 x 100 mm diameter extraction, length 1800 x 1000 mm, weight 310 kg in good condition available approx. mid/end of May 2026 – price ex location Transport available at extra cost! Due to the age of the used machine, warranty is excluded when selling to commercial customers.

Condition: good (used), Year of construction: 1999, - Maximum sanding width (mm): 390 - Maximum sanding height (mm): 390 - Sanding pad from above: 1 - Sanding motor (kW): 7.5 - Sanding belt dimensions (mm): 300 x 1800 - Conveyor belt: for material feed - Feed speeds (m/min): 6/11/16 - Extraction connection diameter (mm): 150 - Constant table height - Pneumatic sanding belt oscillation - Pneumatic sanding belt tensioning - Special HBS sanding shoe: for contour sanding with thickness variations up to 4 mm or warped workpieces - Selector switch for contour sanding / calibrating Itedpfx Aey Avzvjmisg - Motorized workpiece thickness adjustment with rapid traverse - Automatic workpiece thickness sensing - Machine length (mm): 1150 - Machine width (mm): 1020 - Machine weight (kg): 950 - CE compliant

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 14344, General The DiscMaster 4TD is equipped with four rotating discs that oscillate across the entire workpiece width. With its disc-only technology, the machine offers exceptionally low operating costs. The combination of rotation and oscillation delivers outstanding results, and the wide range of available disc tools makes the machine extremely versatile. Two disc units on the infeed side, two disc units on the outfeed side Oscillation over the entire conveyor belt width Processes edges and cut-outs precisely from all directions and angles, delivering true 360° finishing through the overlay of rotation and oscillation Consistent tool wear, regardless of the workpiece’s placement on the conveyor belt Easy and quick tool change for mixed materials, as only four tools need to be changed Versatile applications due to the vast array of available options Itjdpfxsyywr De Amieg Deburring and edge rounding of punched parts as well as waterjet, laser, or plasma-cut sheets in a single pass Deburring and edge rounding of 3D punched parts Edge rounding and oxide layer removal in a single operation Edge rounding and eccentric finishing in one step Processing of small parts from 20mm diameter Processing of coated or galvanized sheets Processing of steel, stainless steel, and aluminum…

Year of construction: 2011, condition: used, functionality: fully functional, MACHINING CAPACITIES: - Height (thickness): 30 to 390 mm - Maximum workpiece width: 400 mm - Abrasive belt speed: 1300 m/min Ijdpfex A Unxsx Amietg - Conveyor feed speed: 10 m/min - Belt dimensions: 420x1800 mm (consult us for supply) MACHINE CONFIGURATION: - Roller table, belt operates from below Table height from floor: 90 cm - Automatic workpiece detection by sensor - Sanding pad with pneumatic pressure - Automatic belt rotation direction change MACHINE FEATURES: - Main power supply: 400V, 3-phase, 50Hz, IN 22A (35A protection) - Automatic star-delta starter - Ammeter(s) for power consumption monitoring Feed motor: 0.5 kW Belt motor: 7.5 kW - Pneumatic tensioning, oscillation, and disengagement of rollers - Pneumatic supply: 6 to 8 bar - Extraction: 2 lower ports Ø150 mm Recommended airflow: 2200 m³/h Speed: 20 m/sec - CE marking, emergency stops front and rear, lockable isolator switch Note: For your satisfaction, we remind you that belts should be released when the machine is not in use and that all humidity, including dew point inside your workshop in winter, must be avoided. Dimensions: 1500x1300x2050 mm (H) Weight: 1200 kg

Condition: used, Measurement data acquisition device, test device, communication system, data acquisition system -DSM: Nanoserver 96M1566L -suitable for: mobile applications -Input: 8-30 V DC, 15 A Iedpfx Amjff Nmbsiotg -Dimensions: 245/220/H120 mm -Weight: 2.8 kg

Condition: excellent (used), Here we offer a screw system. Type: DS 57 MDW, DS 57 SA + PosiControl + MultiPro TA Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone. Written order possible by email or fax Iedpsqa A Uljfx Amiotg

Year of construction: 2016, condition: ready for operation (used), Table dimensions X/Y/Z: approx. 1400mm/800mm, grinding wheel diameter: 150mm, spindle speed: 2000rpm, swivel range: 180°, machine dimensions X/Y/Z: approx. 1600mm/1300mm/1750mm, weight: approx. 400kg. An on-site inspection is possible. Itjdpfx Amjynluhsieg

Condition: used, Year of construction: 1998, Technical details: total power requirement: 0,16 kw dryer Buran Buran DSM, YOM 1998; capacity 0,16kW, possible pressure 16bar, Filter-Ultramat Typ AG 0009, with internal safety against overpressure Itjdpfxju Nzxfe Amieg - with oil separator *

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 2788, Crosscut saw diam. 300 mm Milling spindle diam. 40 mm sliding table with Festo length stop suction nozzle saw 120 mm dto.cutter 140 mm cable + plug 16 Amp, without operating tool Ijdeiau I Sjpfx Amijtg Unfortunately, we can not answer inquiries without complete contact information.

Condition: used, machine/vehicle number: 008349, Max. machining width: 1300 mm Min. machining thickness: 100 mm Iodpfjx A Tfisx Amistg Working Table: adjustable Vacuum feed belt: yes No. Operating units: 3 Nr

Condition: ready for operation (used), 1 x stitching unit 380 2 x stitching heads HK75Q 1 x Touch screen Navigation control 1 x oblique sheet saddle monitor 1 x remote control inch Itjdpfxeyuk S So Amisg 4 x section feeders 370 1 x cover folder feeder 1529 1 x three knife trimmer 449 1 x stream delivery 1564 Optional; 2 x loop stitching heads 1 x Rima stacker

Condition: used, Year of construction: 2004, total width: 1,000 mm, total length: 1,500 mm, total height: 1,300 mm, Empty weight: 200 kg - Year: 2004 - Documentation available: No - CE certificate present: No - Serial number: 195181 - Main motor power [kW]: 22 - Transport dimensions: 1500mm x 1000mm x 1300mm (l x w x h) - Transport weight [kg]: 200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Iedpfx Amew T Hv Rjijtg Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2004, total height: 1,600 mm, total length: 1,250 mm, total width: 1,400 mm, Colour: Grey Empty weight: 900 kg Price: On request - Details: - └ Description: Bad bearings - Year: 2004 - Documentation available: No - CE certificate present: No - Serial number: 102850 - Motor power: 1.0kW Itedpfx Ajyr Rnzjmieg - Transport dimensions: 1250mm x 1400mm x 1600mm (l x w x h) - Transport weight [kg]: 900kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2004, operating hours: 12,582 h, lifting height: 3,150 mm, fuel type: diesel, mast type: duplex, construction height: 2,150 mm, Linde H20D Duplo 315 Freelift / Sideshift / 4th Function, VW Diesel, 2004 Iodpfx Aoy Taqcemietg A video can be sent via WhatsApp. We have a continuous stock; please see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition, without any guarantees (see our general terms and conditions). You can schedule a viewing and/or test drive without any obligation. Please call beforehand to arrange an appointment, as we are not always on-site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, Year of construction: 2004, Overview  This low-pressure vacuum filler was manufactured in 2004 by MBF. The machine was in use until 2017 and was fully functional at the time of shutdown. It was replaced due to the increased demand for carbonated products, which required a different filling principle (counter-pressure). Since then, the machine has been stored dry and protected, with only minor dust present. It is promptly available for sale. Technical data  Capacity: 6,000 bph (1.0 l bottles) 7,000 bph (0.75 l bottles) Bottle diameter: 55–120 mm (via steplessly adjustable in/outfeed stars) Bottle height: 150–370 mm Number of filling valves: 36 Filling principle: Low-pressure vacuum filling Running direction: Left to right Filling valve type: Electropneumatic Special features: Programmable bottle parameters with automatic adjustment for bottle height and fill level Hot filling capable with auto shutdown at temperature deviation Automatic speed adjustment based on bottle infeed CO₂ pre-flushing of bottles Inert gas overlay possible in the filler bowl Auto fill level control depending on product temperature Auto wine changeover via CIP tray CIP dummy bottles and semi-automatic cleaning program Remote maintenance modem Complete documentation (spare parts list, wiring diagram) Central electric fill level adjustment Scope of Delivery  MBF Fillmatic 36LV Filler CIP dummy bottles CIP tray Tele-Modem Complete documentation (electrical and spare parts) Itjdpfxowiu Nlj Amieg

Condition: used, Year of construction: 2004, Overview The empty bottle inspector was built in 2004 by the German manufacturer Miho, designed for quality control in filling lines. The machine was running until January 2025 and is now stored in the company. Technical details Output: 25,000 bph Working direction: Left - right Last used for: 330 ml Longneck glass bottles (green) 330 ml Longneck glass bottles (brown) 330 ml Steinie glass bottles 330 ml Swing top glass bottles 500 ml NRW glass bottles Inspection modules Bottom inspection Sealing surface inspection Side wall inspection Residual liquid and residual caustic detection Iodjwhv T Aepfx Amiotg

Condition: used, Year of construction: 2004, Overview  The labeller was built in 2004 by Italian manufacturer KOSME. The machine is in a good condition, already professionally dismantled and stored in a warehouse. Two cold glue stations. One label, one neck label, one counter label + one adhesive station. The labeler is working in counter-clockwise direction Technical details Capacity: 6,000 bph Labeling stations: 2 cold glue 1 self adhesive Iedev Df I Nopfx Amijtg

Condition: used, Year of construction: 2004, Overview This labelling machine was manufactured in 2004 by the German company GERNEP. The model Labetta 4/3/12 784 2A 3SK is equipped with two wet glue stations and three self-adhesive labelling stations, offering flexible labelling configurations for a variety of bottle types. The machine has a capacity of 8,000 bottles per hour and is available immediately. Technical data  Capacity: 8,000 bph (6,500 bph with photoelectronic orientation) Number of bottle plates: 12 Number of labelling stations: 5 Station 1: Wet glue, labelling height 330 mm, steel glue roller Station 2: Wet glue, labelling height 230 mm, steel glue roller Stations 3–5: Self-adhesive Orientation: Photoelectronic bottle orientation via cap Prepared for orientation via bottle cam Electrical height adjustment Operating voltage: 400 V Frequency: 50 Hz Control unit: Siemens S7-200, Touch TD integrated Direction: Right to left Scope of Delivery  GERNEP Labetta 4/3/12 784 2A 3SK labelling machine Integrated control unit (Siemens S7-200 with Touch TD) Machine safety housing with hinged and lift doors   Ijdpewh U D Tofx Amiotg

Condition: used, Year of construction: 2004, total length: 8,000 mm, total width: 2,200 mm, total height: 2,450 mm, Colour: White Empty weight: 10.000 kg Price: On request - Details: - └ Description: 2 work fields per side Ijdpfjy Nxv Aox Amiotg - Year: 2004 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 1729 - Main motor power [kW]: 1.5 - Press drive: Hydraulic - Max. workpiece width [mm]: 5500 - Max. workpiece height [mm]: 980 - Number of working fields [pcs]: 8 - Number of cylinders per press level [pcs]: 10 - Number of clamps per press level [pcs]: 10 - Options: Separate pressing levels, Motorized rotation - Transport dimensions: 8000mm x 2200mm x 2450mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2004, total length: 4,400 mm, total width: 1,300 mm, total height: 1,200 mm, Colour: Grey Empty weight: 2.500 kg Price: On request - Year: 2004 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 20440160 - Drive system: Conventional - Drive: Hydraulic - Number of rolls [pcs.]: 4 - Number of driven rolls [pcs]: 4 - Power [kW]: 5.5 - Max. sheet thickness [mm]: 4 - Max. prebending thickness [mm]: 3.5 - Max. working width [mm]: 3100 Isdjyym Tdjpfx Amijtg - Top roll diameter [mm]: 170 - Bottom roll diameter [mm]: 160 - Options: Digital readout, Cone rolling - Transport dimensions: 4400mm x 1300mm x 1200mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2004, condition: used, For rounding, backing and casing-in of book blocks in hard, flexible or plastic cases. Alternative gluing, backlining, and headbanding, depending on the equipment of the machine, is possible depending on configuration. Hard cover book line Kolbus BF 527 Year: 2004 - Automatic setting - Co-Pilot with touchscreen - Product counter - Book measuring table - Starfeeder - Pre-heater (hot air) - Rounding and backing station - Glue unit - Excluding gauzing station - Book mark suction device - Glue unit - Head and tail banding station Itjdpfxsx Dkk Se Amijg - Pressing station - Casing-in station - Case pre-stacking conveyor - Case bending station - Case forming station - Coldglue circulation pump Building in machine Kolbus FE 604 - Co-Pilot with touchscreen - Automatic setting - Right hand infeed - Integrated hydraulic - Heater monitoring unit - Straight delivery Book stacker Kolbus DS 391 - Compensating stacker - Straight delivery Kolbus: BF 527 Book block format (max): 305 x 375 x 80 mm (WxHxT) Book block format (min): 100 x 100 x 2 mm (WxHxT) Size range opened case (max): 660 x 385 mm Size range opened case (min): 210 x 105 mm Max. mechanical speed: Up to 60 cycles/min Net production is subject to sizes, materials etc. Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: new, Rexroth DSM 08 A 210K-D Nr.1070081493-209 SN:2270096, unused in opened original packaging, 100% functional, scope of delivery as per photos Isdpfx Asi D T Nhsmistg

Condition: new, Bosch DSM 04 A 2101-D No. 1070075000-202, SN:001299670, unused in opened original packaging, 100% functional, scope of delivery as per photos Iedji D T Uiopfx Amiotg