Used Little Giant Bale Clamps for sale (10,020)

Condition: good (used), Year of construction: 2018, operating hours: 40,350 h, Baling press Presona LP 85 VH2, year of manufacture 2018 Technical data: Manufacturer: Presona Sweden Type: LP 85 VH2 Year of manufacture: 2018 Drive power: 2 x 45 kW Operating hours: 40,350 Effective operating hours: approx. 22,000 Pressing force, pre-press: 28 t Pressing force, main press: 85 t Feed hopper dimensions: 1500 x 1100 mm Bale dimensions: 750 x 1100 mm Bale weight: 450 - 650 kg Theoretical volumetric output: 1200 m³/h Throughput capacity at 30-100 kg/m³: 13-30 t/h Tying: 5-wire vertical, (3-wire horizontal) Hfodpfx Aaszulknofsk Oil tank volume: 2000 L Transport dimensions, press: 10400 x 2400 x 2800 mm (L x W x H) Weight: approx. 27,000 kg Materials: Paper, cardboard, PET bottles, film, light waste. Note: The press is in good condition. It has been dismantled from ongoing operation. The following work has been carried out by us: New wear plates in the press channel Complete replacement of seals on the main cylinder Oil filter changed Vertical tying mechanism overhauled and made operational The horizontal tying mechanism is currently not functional. The technical documentation is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. This offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: good (used), Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping plate with T-slot, clamping table, T-slot table, milling machine table, tilting table -Clamping table: Milling machine table, tilting table, T-slot table -Table surface: 250 x 250 mm, swivels on both sides -T slots: Slot width: 14 / 25 mm, Slot depth: 24 mm -Dimensions: see photos -Transport dimensions: 300/250/H155 mm -Weight: 26.4 kg Hsdpfx Ajy Iwkcjafsfk

Condition: used, Year of construction: 2000, length 800 mm width 800 mm height 1000 mm Hodpfeznnd Djx Aafjfk total power requirement 0 kW weight of the machine ca. 700 kg dimensions of the machine ca. 800 x 800 x 1000 mm

Condition: used, Year of construction: 2000, length 800 mm width 1000 mm height 1300 mm total power requirement 0 kW weight of the machine ca. 900 kg dimensions of the machine ca. 800 x 1000 x 1300 mm Hedpeznndqefx Aafjfk

Condition: good (used), Year of construction: 2017, functionality: fully functional, In stock Baling press HSM, type HL 7009 ST Re, year of manufacture 2017 Technical data: Manufacturer: HSM Type: HL 7009 ST Re Year of manufacture: 2017 Pressing force: 70 t Specific pressing force: 58 N/cm² Drive power: 11 kW Feed opening: 1020 x 900 mm Bale size: 1100 x 1100 mm (W x H x L) Bale weight: up to 600 kg Tying: 4-fold horizontal, manual Machine dimensions: 5992 x 2066 x 2394 mm (L x W x H) Weight: 7500 kg Materials: Paper, cardboard, film Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and any possible errors. The offer is non-binding, subject to prior sale and may be revoked at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without any warranty. Hodpfxszt N Afj Aafofk

Condition: good (used), Year of construction: 2021, functionality: fully functional, In stock Baling press HSM, type HL 7009 ST/A, year of manufacture 2021 Technical data: Manufacturer: HSM Type: HL 7009 ST/A Year of manufacture: 2021 Pressing force: 70 t Specific pressing force: 58 N/cm² Drive power: 11 kW Feed opening: 1020 x 900 mm Bale size: 1100 x 1100 mm (W x H x L) Bale weight: up to 600 kg Tying: 4-way horizontal, manual Hedpfx Aaozt Nzzjfefk Machine dimensions: 5992 x 2066 x 2394 mm (L x W x H) Weight: 7500 kg Materials: paper, cardboard, film Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. This offer is non-binding, subject to prior sale, and may be withdrawn at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without any warranty.

Condition: new, Year of construction: 2014, operating hours: 46 h, load capacity: 300 kg, lifting height: 1,850 mm, fuel type: electric, mast type: duplex, construction height: 1,500 mm, Manufacturer + model: LINDE L 16 (372) Mast: 2W1850 + KAUP / Drum clamp ID: 23032.5921 Category: Demo Mast: 2W1850 Lowered height: 1500 mm Lifting height: 1850 mm Year: 2014 Hours: 46 Capacity: 24 V / 345 Ah Hsdezut Tdepfx Aafsfk Options: Equipped with a SELF-SUPPORTING drum clamp -> KAUP 0.8 R405 Drum clamp reach = 450 to 850 mm

Condition: good (used), Year of construction: 2018, operating hours: 6,765 h, functionality: fully functional, In stock Channel baler HSM VK 4812P, year of manufacture 2018 Manufacturer: HSM Type: VK 4812P Year of manufacture: 2018 Operating hours: 6765 Pressing force: 48 t Drive power: 15 kW Total power: 18 kW Feed opening: 1020 x 1250 mm (W x L) Capacity: 50 kg/m³: 7.5 t/h Bale size: 1,100 x 750 x 600-1200 mm Bale weight: 300-550 kg Tying: 4-fold, automatic Transport dimensions: approx. 7,530 x 2,400 x 2,400 mm (L x W x H) Weight: approx. 10,000 kg Materials: PET bottles, cardboard, paper, film Hfedpfeztphhjx Aafok An operating manual and EC declaration of conformity are available in German. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Inspections are possible by appointment. The sale is ex works, without warranty. Our payment terms are 100% prepayment.

Condition: good (used), diameter 250 mm amount 1 STK weight 37 kg Pratt Burnerd 6-jaw self-centring chuck (6 Jaw Griptru Scroll Chuck), Ø 250 mm – catalogue number 1260-02505. -->> Special feature of the 6-jaw chuck: Technical data – Specifications Type: 6-jaw self-centring chuck --> Model: l1260-02505 --> Outer diameter: 250 mm --> Number of jaws: 6 --> Through bore: approx. 75.9 mm --> Centring recess: 200 mm Hfedszupmtepfx Aafsk --> Mounting: 3 × M12 on 224 mm bolt circle --> Design: Rear mounting / Plain Back --> Clamping system: Scroll chuck (self-centring) --> About the model number

Condition: like new (used), number 7 Stück weight 3,75 kg/Stück range L-W-H 175x 75 x 130 mm Multi Quick MQ 110 Set – (Item No. 110-091-2022 – Clamping force 40 kN) This infinitely adjustable clamping element is characterised by maximum horizontal and vertical adjustability thanks to an integrated support plate. Hfodpfxozuplvj Aafsk Applications include plastics technology, machining and metal forming. --> high clamping force --> low tightening torque Price per unit, discount for bulk purchases

Condition: good (used), weight 35 kg amount 1 STK tension force 40 kN Hfodpfxszuplpo Aafjk Röhm NC Compact Clamp RKK With standard jaws SA and normal jaws SGN—optimized for maximum working precision on CNC milling machines and machining centers with very high working precision. Size 1: Mechanical-hydraulic clamping system. Sizes 2-5: Mechanical- mechanical clamping system. Drive spindle with clamping force presetting, deformation-resistant design for maximum clamping accuracy, mounting thread for workpiece stop, clamping surface for clamping claws, With grease nipples on both sides, all guides subject to wear and the spindle thread can be lubricated quickly and easily—Stable steel base body and all guides are hardened and ground on all sides, Size 1: Long clamping slide with cross offset, hardened on all sides, functional surface ground, Size 2-5:

Condition: used, Technical details: Hsdpfxsvfduws Aafefk length: 1200 mm width: 500 mm height: 1260 mm

Condition: ready for operation (used), Year of construction: 2012, Brand: DIXI Model: 60 SD Year of manufacture: 2012 Pressing force: 60 tons Voltage: 400 Max. bale weight: 340-500 kg Bale dimensions: approx. 120 x 80 x 80-110 cm Machine weight: 2400 kg Hjdpfxjzkh Uns Aafefk Machine dimensions: 190 cm wide x 140 cm deep x 230 cm high Dimensions of the feed opening: 115 cm wide x 80 cm deep x 55 cm high The DIXI 60 SD features simple operation, an automatic start function, and automatic bale ejection. Thanks to its compact, low-profile design, this machine is ideal for spaces with limited height.

Condition: excellent (used), Mounting plate, scribing plate, measuring plate, measuring table, straightening plate, scribing plate, test plate, inspection plate, precision measuring table -Clamping surface: 3000 x 2000 mm -Quantity: 3 mounting plates available -Price: per piece -Note: The mounting plates can be screwed together end-to-end, as the end faces are milled. -Possible clamping surfaces: 3x 3000 x 2000 mm (1x 9000 x 2000 mm) (1x 6000 x 3000 mm) -Sheet thickness: 60 mm -Plate: with supporting ribs Hsdpfx Aew Dzk Eeafsfk -Dimensions each: 3000/2000/H360 mm -Weight: 4500 kg/unit

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Hsdpjzp H R Eefx Aafefk Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: used, functionality: fully functional, Year of construction: 1999, load capacity: 2,900 kg, Clamp fork Condition (Technical): normal Hfsdjzt Drhepfx Aafek Description: German: KAUP clamp fork 1T453 No.: R0812 Year of manufacture: 1999 Manufacturer: KAUP Type: 1T453 Load capacity: 2,900 kg Load center: 500 mm Center of gravity: 340 mm Load center distance: 291 mm Weight: 1,085 kg Max. hydraulic pressure: 160 bar Serial number: 9003608 The KAUP clamp fork is a hydraulic attachment for forklifts, enabling both the normal lifting of loads via the fork tines and the lateral clamping of suitable goods. The attachment is in used condition, with cosmetic wear commensurate with its age. A thorough technical inspection and a check of compatibility with the respective forklift should be carried out before use. Fast and straightforward transport is possible upon request! This advertisement serves solely to identify the attachment. A detailed description of the condition and possible equipment is provided individually upon request. Subject to errors and prior sale. Sale only to commercial businesses. All sales of used equipment are made without warranty or guarantee. If you have not found the right attachment, please contact us. We have a large selection of other equipment and attachments available on site. English: KAUP Clamp Fork 1T453 No.: R0812 Year of manufacture: 1999 Manufacturer: KAUP Type: 1T453 Capacity: 2,900 kg Load centre: 500 mm Centre of gravity: 340 mm Lost load centre: 291 mm Weight: 1,085 kg Max. hydraulic pressure: 160 bar Serial number: 9003608 The KAUP clamp fork is a hydraulic forklift attachment and can be used both for conventional handling with the forks and for clamping suitable loads from the sides. The attachment is in used, age-related visual condition. A detailed technical inspection and verification of compatibility with the respective forklift should be carried out before use. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the attachment. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right attachment, please contact us. We have a large selection of additional equipment and attachments available on site.

Year of construction: 1995, condition: excellent (used), functionality: fully functional, machine/vehicle number: 20/192, We are offering this used elumatec KF 178 in very good condition, year of manufacture 1995. Model: KF 178 Hjdjy D I R Sopfx Aafsfk Machine no.: 20 192 Voltage: 230/400 V Frequency: 50 Hz Current: 3.6/2.1 A Speed: 12,000 rpm Operating pressure min.: 5 bar Operating pressure max.: 8 bar If you have any questions or need more information, please feel free to send us a message or call us.

Condition: used, functionality: fully functional, 4 used adjustable wheel clamps for recovery crane, etc., fully functional. No shipping possible. Please do not send email enquiries! If you have any questions, you can reach us by phone. Viewing and collection only by prior telephone appointment. Subject to changes, prior sale, and errors. Hjdezur Tpjpfx Aafsfk We are a member of the Federal Association of Independent Motor Vehicle Dealers (BVfK) and carry the BVfK quality seal!

Condition: good (used), Year of construction: 2021, operating hours: 423 h, functionality: fully functional, Vertical baling press HSM V-Press 860 plus, year of manufacture 2021 Technical data: Manufacturer: HSM Type: V-Press 860 plus Year of manufacture: 2021 Operating hours: 423 Pressing force: 60 t Drive power: 4 kW Feed opening: 1195 x 645 mm Feed height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Tying: manual Theoretical cycle time in idle mode: 25 s Theoretical pressing capacity: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Hodpfx Aaozqr Niofjfk Weight: 2213 kg Materials: Film, paper, cardboard Note: The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by appointment. The sale is ex works, without warranty. Our payment terms are 100% prepayment.

Condition: good (used), Year of construction: 2021, operating hours: 450 h, functionality: fully functional, Vertical Baler HSM V-Press 860 plus, Year of Manufacture: 2021 Technical Data: Manufacturer: HSM Model: V-Press 860 plus Hjdpfx Aaezqr Irjfefk Year of Manufacture: 2021 Operating Hours: 450 Pressing Force: 60 t Drive Power: 4 kW Feed Opening: 1195 x 645 mm Filling Height: 1114 mm Bale Size: approx. 1200 x 1200 x 780 mm Bale Weight: 480 kg Binding: manual Theoretical Cycle Time (idle): 25 s Theoretical Throughput: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Materials: Film, Paper, Cardboard Comment: The baler is in good condition. It has been checked and tested by us. A video is available on our website or YouTube channel. Please note: All technical data is based on the manufacturer's information. We accept no liability for the accuracy of the information provided or for any possible errors. Offers are subject to change without notice, prior sale reserved, and may be withdrawn at any time. Inspections are possible by appointment. Sale is ex location, without warranty or guarantee. Our payment condition is 100% advance payment.

Condition: used, Year of construction: 2018, Avermann baling press, type AVOS 1810 BRK-90/100, year of manufacture 2018, cross-tying Technical data: Manufacturer: Avermann Type: AVOS 1810 BRK-90/100 Year of manufacture: 2018 Pressing force: 100 t Drive power: 2 x 45 kW Dimensions of the feed hopper: 1,800 x 1,000 mm Throughput capacity at 35 kg/m³: 15.0 t/h Throughput capacity at 60 kg/m³: 20.0 t/h Throughput capacity at 100 kg/m³: 29.0 t/h Bale dimensions: 1,100 x 750 mm (W x H), length variable Bale weight: up to 650 kg, depending on the material Tying: 5-fold vertical, 3-fold horizontal, automatic Machine dimensions: approx. 11,200 x 2,400 x 3,900 mm (L x W x H) Machine weight: approx. 29,000 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is non-binding, subject to prior sale and can be withdrawn at any time. Hfodpfx Aozqc Ngsafok Inspections are possible by arrangement. The sale is made against advance payment, ex works, without warranty.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, overall weight: 300 kg, LANG Clamping Tower 70850 with Grid Plates 75710 2 towers with plates are available! We are offering a high-quality LANG Clamping Tower 70850 with matching Grid Plates 75710. This clamping system is ideally suited for precise and efficient 5-axis machining as well as multi-sided machining on CNC machining centers. Technical Data: Manufacturer: LANG Technik Type: Clamping Tower 70850 Accessories: 8 x Grid Plate 75710 Clamping system with grid hole pattern High repeatability Robust design for industrial use Ideal for automated manufacturing and setup time optimization Condition: Used, technically flawless. Normal signs of wear and tear consistent with age and application. Scope of supply: 1 x LANG Clamping Tower 70850 8 x LANG Grid Plates 75710 Hedpfx Aeztzi Roafsfk The clamping tower enables optimal utilization of the machine's working area and increases productivity by machining multiple workpieces in a single setup. Inspection possible by arrangement. Shipping or collection by agreement.

Condition: ready for operation (used), Year of construction: 2008, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2008 Hjdjzh Eztepfx Aafefk Pressing force: 532 kN Voltage: 400 V Max. bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening: 119.5 x 65 cm Condition: very good! Video of the machine in operation available on request. Transport also possible.

Condition: used, Two FAG H2312 clamping sleeves with KM12 slotted nuts Technical data: Hfsdpfszrxv Sox Aafok - Condition: As new

Condition: used, d1 = 35 mm d2 = 27 mm (spanner width) Hsdjzrxqpjpfx Aafofk Technical data: - Overall length: 195 mm