Used Komet Powervac 200 for sale (16,657)

Condition: used, Bosch Turbo Scara SR6 Articulated Arm Robot The SR6/SR8 robot system consists of robust robot mechanics with four freely programmable axes. Thanks to its high speed and payload capacity (up to 8 kg), the robot is ideally suited for assembly work and fast pick & place operations. The TurboScara SR6 and SR8 are articulated arm robots (Scara robots) with four axes and the following advantages: • Minimal cycle time with maximum precision • Large working area and various stroke lengths • Defined mechanical interfaces • PC control with a wide range of communication options • Complies with international standards • Brushless drive technology reduces repairs Pgjdehtrdcepfx Akiju • Integrated user installation, optional: gripper for connecting a tool connector • Integration of safety technology (safety class 3) as standard • User power supply (24 V) in the control cabinet • The BAPS programming language is easy to learn and enables the creation of clear and understandable programs; new with BAPSplus: graphical programming interface • Expandable via compact and flexible input/output modules: B~IO modules or decentralized CAN-I/O modules • Expandable via the VTS02 solenoid valve system with CAN connection for time-saving installation Technical data: Nominal load: 2 kg Maximum load: 8 kg Nominal moment of inertia: (axis 4) 500 kgcm² Maximum moment of inertia: (axis 4) 1000 kgcm² Horizontal force: continuous/max. 60/150 N Vertical force: continuous/max. 200/300 N Torque: (axis 4) continuous/max 5/10 Nm Weight: 48.5 kg Maximum speeds SR6 Axis 1+2: 5.9 m/s Axis 1: 350 °/s Axis 2: 480 °/s Axis 3: (∅20 mm) 1600 mm/s Axis 3: (∅25 mm) 1200 mm/s Axis 4: 1200 °/s Cycle time (cycle 25-300-25): < 450 ms Controller consisting of the following components: Rexroth / MA4/200-7301-M / Robot Controller Module Rexroth RH04.0S You can find more new and used items in our shop! International shipping costs on request!

Condition: used, Hermle Z 200 A Centrifuge – Small Centrifuge A compact centrifuge for doctors and clinical laboratories. The Z 200 A can accommodate up to 12 x 15 ml tubes with conical and round bottoms. Specifications: Capacity: max. 12 x 15 ml / 6 x 50 ml Speed: max. speed/RCF: 6000 rpm / 4185 xg min. speed/RCF: 250 rpm / 7 xg Speed range: 250 - 6000 rpm Speed setting: button-controlled in 250 rpm increments Speed display: preset and actual speed – digital Run time: max. time: 30 min. / continuous operation Pgjdpfom Albdjx Akiju min. time: 0.5 min. Preset: 0.5 - 30 min. / “Hold” Time setting: 0.5 min. increments via button press Time display: remaining time – digital Brake: fixed braking force with soft stop Features: - Microprocessor-controlled - DC motor, covered - ABS plastic housing, impact-resistant and chemical-resistant Safety: - Lid locking system - Automatic imbalance detection with safety shut-off - Manufactured according to IEC 1010, UVV VBG 7z Dimensions (cm / inches): Width: 28 / 11.0 Height: 26 / 10.2 Depth: 37 / 14.6 Weight: 15 kg / 33.0 lbs Power consumption: 180 W Item condition: used, top condition You can find more centrifuges – new and used – in our shop! International shipping costs available upon request!

Condition: used, Bosch Turbo Scara SR6 Articulated Arm Robot + Rexroth MA4/200-7301-M + RH04.0S Controller   The SR6/SR8 robot system consists of robust robot mechanics with four freely programmable axes. Thanks to its high speed and payload capacity (up to 8 kg), the robot is ideally suited for assembly tasks and fast pick & place movements.   The TurboScara SR6 and SR8 are articulated arm robots (Scara robots) with four axes and the following advantages:   • Minimal cycle time with the highest precision • Large working area and various stroke lengths • Defined mechanical interfaces • PC-based control with a wide range of communication options • Complies with international standards • Brushless drive technology reduces maintenance • Integrated user installation, optional: gripper for connecting a tool connector • Integration of safety technology (safety class 3) as standard • User power supply (24 V) in the control cabinet • The BAPS programming language is quick to learn and enables the creation of clear and understandable programs; now with BAPSplus: graphical programming interface • Expandable via compact and flexible input/output modules: B~IO modules or decentralized CAN I/O modules • Expandable via the VTS02 valve block system with CAN connection for time-saving installation   Technical data:   Nominal load: 2 kg Maximum load: 8 kg Nominal moment of inertia: (axis 4) 500 kgcm² Max. moment of inertia: (axis 4) 1000 kgcm² Horizontal force: continuous/max. 60/150 N Vertical force: continuous/max. 200/300 N Torque: (axis 4) continuous/max 5/10 Nm Weight: 48.5 kg   Maximum speeds SR6 Axis 1+2: 5.9 m/s Axis 1: 350 °/s Axis 2: 480 °/s Axis 3: (∅20 mm) 1600 mm/s Axis 3: (∅25 mm) 1200 mm/s Axis 4: 1200 °/s   Cycle time (cycle 25-300-25): < 450 ms   including controller   Controller consisting of the following components:   Rexroth / MA4/200-7301-M / Robot Controller Module Rexroth RH04.0S   Swivel range / technical data see image   Since the item is available in multiple quantities and the robots have different working tools, these are only sample images and may vary.   Item condition: used   (Changes and errors in the technical data are subject to change!)   In addition to approximately 50 paternoster lifts, numerous other machines such as presses, robots, ovens, industrial vacuum cleaners, etc. are available.   Workshop equipment, workbenches, tool carts, tools, and forklifts are plentiful.   Pedpfxoiuzqtj Akisgu In total, 24,000 m² of production space will be dismantled and sold.   Please also note our other offers.   Payment is due within 7 working days of purchase.   You can find more new and used items in our shop! International shipping costs on request!

Condition: used, Forklift attachment – drum grabber Suitable for 2 x 200-liter steel drum/steel lid drums Description: Secure grip, even on uneven surfaces Pedpfexbq Irox Akiegu Stable, welded steel construction Forklift attachment module with a robust powder coating in blue (RAL 5010) Quick and easy mounting on the forklift Automatic locking when lifting the drum Automatic release of the clamp when lowering Safe handling of steel drum and retaining ring drums Height-adjustable Technical data Surface: Hot-dip galvanized Application: Lifting/transport of steel drums External width [mm] 1050 External depth [mm] 1080 External height [mm] 975 Fork pocket spacing [mm] 730 Fork pocket W x H [mm] 150 x 55 Total load capacity [kg] 700 Material: Steel Approval / Certificate description 1 2006/42 DECLARATION OF CONFORMITY Weight [kg] 110 You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, Heid S-200 CNC lathe - Manufacturer: Heid - Type: S 200 - Machine type: CNC lathe - Tailstock travel: 175 mm - Tailstock quill mount: - Morse taper: 4 MK - Quill stroke: 140 mm - Quill diameter: 95 mm Podox Elw Ejpfx Akisgu - Thrust force: 17 kN - Connection 50 Hz 3-phase: 380 volts - Total power requirement: 65 kVA - Spindle speeds: - Continuously variable from 0 rpm to: 4000 rpm - Spindle bore: 77 mm - Tool shank cross-section: 25x25 mm - Turning diameter over the bed: 420 mm - Maximum turning diameter: 250 mm - Turret: - Longitudinal travel (Z-axis): 1150 mm - Cross travel (X-axis): 230 mm More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, Erlab Captair Filtair 936 Filter Fume Hood The ductless, filtering chemical fume hoods from Erlab offer the most powerful filtration worldwide and guarantee safety and performance. A system with countless advantages that provides comprehensive protection throughout the laboratory and beyond. Equipped with SMART technology, an intuitive communication platform that monitors all critical performance parameters of the fume hood and ensures your safety at all times. Advantages Perfect user protection Filtration safety: All models of the captair@ filtair filter fume hood comply with the AFNOR NFX 15-21 Class II standard. Retention of chemical vapor pollutants in the work area, guaranteed by controlling the air velocity at the front and complying with the standards for pollutant retention (XPX 15203, BS 7258, DIN 12927). Sampling valve for the exhausted air enables the user to monitor the filter saturation at any time using color reaction tubes (not included). The front and door made of acrylic protect against any chemical splashes (fire classification, NF P92.507 standard). Psdpfjyk Dq Hsx Akisgu Ergonomics and comfort Sloped front for a better view of the work process. Well-designed openings for the hands provide the user with plenty of freedom of movement in the work area. Stuffing boxes for inserting electrical or power cables into the work area. Work position adapted to the user. Very low noise level (49 dBA). Transparent walls for a good overview of the work processes in the work area. Easy installation / Energy saving No exhaust duct required; a power outlet is sufficient. Direct installation in your laboratory or on an optional mobicap" rolling table. Energy saving, through the recycling of the purified air from the unit without consuming heated or cooled air. Erlab/Captair Filter Fume Hood Filtair 936. Connection values: 230 V. 50 Hz. 94 W Safety class 2 Air flow m³/h: 200 m³/h Air inlet velocity front m/s: 0.51 Filtration type S Filter 960-961. Safety class 3 Class for pollutant retention B 2 fans Analog flow meter Noise level approx. 51 dB(A) External dimensions: 110x84x74 cm Internal dimensions: 87x82x73 cm Volume of the work area m³: 0.432 Two handles in the front window Available filters: MF and VF CE marking. You can find more items - new and used - in our shop! International shipping costs on request!

Condition: used, Year of construction: 2017, power: 10 kW (13.60 HP), input current: 25 A, Q-FIN FIERDE 200 Manufacturer: Q-FIN Type: FIERDE 200 Year of manufacture: 2017 Technical details: Max. passage width: 200 mm Min. part dimensions: 10 x 10 mm Feed speed: 1.2 – 10 m/min Pgodoz Ic Axopfx Akiou Power supply: 400 V / 50 Hz Rated current: 25 A Connected load: 10 kW Through-feed grinding machine with extraction system Condition: Used Accessories, tools, and clamping devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT23202019236, empty load weight: 5,675 kg, maximum load weight: 26,325 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 10/2026, next inspection (TÜV): 10/2027, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,030 mm, suspension: air, tire size: 435/50 R19,5", color: yellow, Fine-grain steel welded construction, fifth-wheel coupling plate with replaceable 2" kingpin - Slightly inclined outer frame with "Load-Lock-Profil" for securing straps - Note: When securing straps in conjunction with side boards, the side boards must be opened! - Single-side operation of landing legs, straight lower section, without thrust compensation - Side-mounted door retainers, aluminium side underrun protection, galvanised steel rear underrun protection - Heavy-duty pallet stop on both sides, approx. 20–25 mm high, lashing points every 200 mm; loading height reduced by approx. 20–25 mm - Spare wheel, same make as standard tyres - Plastic toolbox with drawer and shelf, W=650 / H=520 / D=670 mm, lockable with a padlock (padlock not included) # Axles and suspension - BPW disc-brake axles - Air suspension # Braking system - Dual-line compressed-air braking system - Spring-loaded parking brake - 2 misconnection-proof coupling heads at the front, without connecting lines - EBS electronic braking system with front EBS socket, without connecting cable - Warning: This trailer may only be towed by tractor units that ensure the effective operation of the ABS! - With raise/lower valve - Vehicle driving stability system # Wheels and tyres - 435/50 R19.5", make at manufacturer's discretion # Electrical system - 24 V, multi-chamber lights, yellow LED side lighting - Yellow LED side lighting with 20 LEDs per lamp - 2 white front position lights - 2 white/red rear outline marker lights - 2 x 7-pin and 1 x 15-pin misconnection-proof sockets at the front, without connecting cable - LED safety light, mounted at the top of the rear corner posts - Approx. 30 mm thick screen-printed floor panels, cross joints with Omega inserts, on longitudinal bearers for high point loads; maximum forklift axle load 7,100 kg # Front bulkhead / corner posts - 2,580 mm high, steel corner posts in high-volume design # Centre posts - Pair of sliding posts, movable along the full length, with four-way sockets and a long lower socket - Pair of post positions # Insert boards Podpfxj Aay Sbs Akiogu - 4 rows of aluminium V-shaped insert boards # Rear wall / corner posts # Curtain - Curtain with welded-in horizontal and vertical tensioning straps # Roof - Sliding roof, rear end lift-up section; roof can be slid from rear to front; L-shaped roof rail for the automotive industry; internal width between roof rails approx. 2,490 mm; curtain colour: white - EcoLift lifting roof, raises by approx. 380 mm, assisted by gas struts - Front with 2 driving positions: - Front internal height approx. 2,900 mm / 3,000 mm # Operating instructions - If the overall height exceeds 4,000 mm, please note the following: - The transport operator is solely liable for any resulting damage. - The driver transporting the vehicle must obtain a permit under Section 29 of the German Road Traffic Regulations (StVO). - We accept no liability for transporting the vehicles. - Note: The specified gross weight is technically possible; depending on the load, it may not be achievable while complying with the permitted axle and fifth-wheel loads. # Registration / plates - Germany - With DEKRA inspection and report - Load securing certificate to EN 12642 XL (valid only in conjunction with 4 rows of aluminium boards) - Additional DC 9.5 certificate, pallet stops on both sides, approx. 25 mm high; loading height reduced by approx. 25 mm; warning panel to ECE Regulation 70

Condition: new, CATALOGUE NUMBER: MR001 - New machine, DTR documentation + CE marking TECHNICAL DATA - Effective width: 2000mm - Front width: 2500mm - Depth: 600/850mm - Height: 1700/1950mm - Max. capacity: 9000m3/h - Fan power: 1.1kW - Speed: 2780 rpm - Electrical parameters: 400V-50Hz - Diameter of the outlet pipe – square: 500x500mm - Cardboard pre-filter - “Paint-stop” filters - Dimensions (L/W/H): 2500x850x2200mm - Weight approx.: 250kg The stated price applies to the standard version. Dry walls are used to extract mist from painting or coating processes. Extraction and purification of contaminated air is carried out by a dual filtration system consisting of: cardboard filters at the front of the machine and a “Paint-stop” filter. The wall is constructed from modular panels made of galvanized sheet metal. Equipment: – Painting wall with a two-stage filtration system (Paint Stop filter and Andrea filter) – Extension for the painting wall, increasing the width from 2000mm to 2500mm and the height from 1700mm to 1950mm – Multi-plane adjustable damper – Atex fan 9,000 m3/h – Soundproofed fan housing – Internal silencer, shape 380×700 L – 600 mm – Roof/wall exhaust outlet – side – Gasket for connecting exhaust ducts – Screw for connecting extensions and ventilation ducts Optional: – Fan power regulator – Mechanical filter – replacement of the cardboard filter with a steel mechanical filter – Third stage of filtration – adding a third stage of filtration using a synthetic fiber filter, to further purify the filtered air. – Ceiling with lighting – Internal silencer, shape 500 x 500 mm L – 600 mm – Wall extension (increasing the working area) – Recessed enclosure (increasing the working area) – Supply air system – Ventilation ducts – Connection fitting 600×600 – 135-degree elbow exhaust outlet (directs air downwards at a 45-degree angle) – Vertical exhaust outlet 500×500 with a reduction from 600×600 (discharges air vertically upwards, so that it rises several meters above the outlet and spreads evenly) Also available: Painting wall PRO 2000/1700/600 with 10,000 m3/h / 300 Pa explosion-proof radial fan – 1.5kW motor Podox Uz Rmspfx Akiegu – 14,600 PLN / net, with the option to choose the fan arrangement on the right/left or rear side of the wall. Net price: 11,600 PLN Net price: 2,700 EUR depending on the exchange rate of 4.30 EUR (Prices may change due to higher fluctuations)

Condition: new, CATALOGUE NUMBER: HZ0001 PRODUCT FEATURES As standard, the units are equipped with mobile sawdust containers, featuring a clamping system that allows for a tight connection between the container and the machine structure. This enables the achievement of high vacuum levels without losses at individual connection points. Contaminants from the filter fall directly into hermetic containers with a quick discharge option, which have a special suspension system and mobile wheels for easy and fast transport and maneuvering. The 5.5 kW / 6500 m3/h vacuum fan, operating at 2,800 Pa, functions based on a turbine principle, and the sound-dampened fan design allows for a significant reduction in noise emissions during operation. A certified control cabinet enables continuous monitoring of correct operation, thanks to the possibility of placing it remotely from the machine. As standard, it comes with an integrated system for controlling the operation of the fans and a system for cleaning the filter fabric. ADVANTAGES - New machine - CE certificate - High performance - Professional Scope of supply: Polyester filter, 5 microns 2 containers Mobile undercarriage Filter cleaning using a vibration system with control TECHNICAL DATA - Extraction capacity approx. 6500 m3/h - Motor power 5.5 kW - Rotation speed 3000 rpm - Voltage 400V, 50Hz - Extraction nozzle 280 mm - Filter area 16.3 m2 - Extraction speed 28 m/sec - Number of filters 35 - Vacuum 2800 Pa Pgedpfszrk Rhex Akieu - Filter category G - Filter material polyester - Dimensions L/W/H 921x1982x2271 mm - Weight 350 kg Net price: 17,400 PLN Net price: 4,050 EUR Net price calculated according to the exchange rate of 4.3 PLN/EUR (the price may change with significant exchange rate fluctuations)

Condition: excellent (used), machine/vehicle number: 00 06 028/00 0026 S, functionality: fully functional, Desiccant air dryer Manufacturer: Motan Type: Luxor LA/8-200 Connection value: 6 kW Dry air flow rate: 200 m3/h Silos for granules: 1 x 150 L 4 x 60 L Pgsdoyvfkrjpfx Akiju Material conveying equipment: Manufacturer: Motan Type: HLX-06-1-A000-0 5 units PRICE REDUCTION FROM 6750 TO 6000 EUR!!!

Condition: good (used), Year of construction: 1983, travel distance X-axis: 6,000 mm, Spindle diameter: 200 mm Machining width: 6000 mm Machining height: 3150 mm Max. machining depth: 1985 mm Slide cross section: 530 x 550 mm Table load capacity: 20 t Plate field size: 11200 x 5550 mm Tool holder: SK 60 Machine weight approx.: 173 t Additional information: - Additional equipment: large and small angular heads - Listing No.: 22979 - The table is model S20 MP, size: 2200 x 2500 mm - The machining width on the X-axis of the machine is 6000 mm Pgedpfx Ao Afwrzokiou - Including 6 plates measuring 5600 mm x 1850 mm

Condition: excellent (used), Three-jaw chuck Make: Forkhardt Type F 200 Diameter 200 mm Short taper mount KK 8 Taper diameter 139.7 4 stud bolts M 16 Pjdpovwk Eaofx Akisgu Pitch circle diameter 171.4 Through hole 52 mm Weight 24 kg

Condition: excellent (used), Year of construction: 2018, Chassis for edge banding machines Was mounted on Homag Edgeteq S-200, KDF 1130 FC (1100kg). Will certainly also fit other machines, such as Brandt (minor modifications may be necessary) Length of U-section: approx. 1130mm Overall height incl. castors: approx. 150mm Psdpfx Aksw S Dmdoiegu 4 sturdy steel swivel castors with grease fittings 2 locking brakes 2 leveling plates for height adjustment Machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller".

Condition: new, table length 3000 mm table width 1500 mm table height 200 mm weight 1500 kg Manufacturer: GERD WOLFF Technical Details: • Length 3000 mm • Width 1500 mm • Height 200 mm • Weight 1500 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 8 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded Pgjdpfx Aeymf Rtskisu seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 175118, operating hours: 3,203 h, spindle speed (max.): 12,000 rpm, Mazak FJV-200 (2005) Serial Number: 175118 Through Coolant BT40 Tooling Mazatrol 640M control 30 Tool magazine 12,000 rpm main spindle Pedpfxsv Txple Akiogu full set of manuals This item is physically in stock and can be seen in full working order, at our showroom. Delivery and installation can be arranged at extra costs.

Condition: good (used), Forklift battery charger, industrial charger, forklift battery charger, industrial charger, silicon rectifier -Charger: for forklifts, type D 24/200 MULTI WF200 Pgodswcdt Hjpfx Akiou -Input voltage: 400 V 50 Hz -Power: 24 V/200 A -Dimensions: 555/520/H890 mm -Weight: 119 kg

Year of construction: 1996, condition: reconditioned (used), Stock-No.1624 Strand "spagetti" pelletizer Capacity 500 kg/h Pgedpjby I Syefx Akisu Drive 4 kW Rotor width 200 mm - double bearring materials: PP,PE,PS,PET,PC,PA div material Noise- protected housing box OPTIONAL against additional cost: adjustable pellet length device Ask for our machine-stock-list, with more pelletizing equipment ex our stock availabe.

Condition: excellent (used), Year of construction: 2005, 19 stations design: cassette Pjdpfxsh Tm Rae Akiogu shaft Ø: 30 mm strip width: 200 mm strip thickness: 1 mm

Condition: excellent (used), Year of construction: 2005, dual track rollforming line 2 x 18 stations design: cassette Pgodjh Tm Rlepfx Akiou shaft Ø: 30 mm strip width: 200 mm strip thickness: 1 mm

Condition: excellent (used), Optical data coupler (28559) Make Leuze Podpfjuphhfsx Akiogu type DDLS 200/120.1-60 used from machine dismantling

Condition: like new (used), Pneumatic meat bin lift Lift is designed for loading the product placed in 200 l meat bins (type U-200) Material: Stainless Steel Model: 200 liter Unloading height: 1.240 mm Pgedpfx Akjinup Doiju Capacity: 200 liter or 300 liter Dimensions (LxWxH): 1.800x900x1.930 mm Weight: 250 kg.

Condition: used, Grinding spindle Manufacturer: FAG Pjdsc Tuxdepfx Akiogu Dimensions of the tapered mounting arbor: Diameter 80 - 61, length 100 mm mounting arbor Diameter min. 68, length 70 mm Diameter max. 80, length 70 mm min. 61, length 100 mm max. 80, length 100 mm Length 500 mm Diameter 200 mm Weight 100 kg DX9UK3MUZNK

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, For sale is a leak testing device from the brand JW Froehlich in good, used condition, as can be seen in the pictures. Technical data: Pjdpsz I Db Asfx Akisgu • Manufacturer: JW Froehlich • Model: MPS-200 • Testing method: Relative pressure measurement. Optional measurement methods: pressure drop, pressure increase, overpressure, underpressure. • Testing pressure range: approx. -0.8 to 6 bar • 6.5" color monitor with touchscreen and Windows operating system • Year of manufacture: 2014 • Documentation: Leak testing seminar • Condition: Used, functional Shipping costs via freight forwarder: approx. €90 If interested, a leak calibrator LK-20 is also available! International buyers are welcome! You will receive an invoice with VAT shown. Inspection/collection is possible by arrangement in 42855 Remscheid. Sale from the location 42855 Remscheid, free on board. Errors in technical data and prior sale are reserved.

Year of construction: 2016, condition: used, Sewing machine Muller Martini Ventura MC 200 (A371.1000) Pgodpez Atcuofx Akisu Year: 2016 Cycles: 1,5 mio (stitches) Description: - Commander with touchscreen - Automatic setting - Feeder - ASIR Automatic Signature Image Recognition: ASIR III - 4 + 4 opening possibilities - Book stacker - PIAB Max. mechanical speed: up to 200 cycles/min Maximum size range: 510 x 320 mm Minimum size range: 120 x 75 mm Number of stitches: 13 Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!