Used Johann Fischer Aschaffenburg Clamping Angle for sale (14,609)

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 500 x 200 mm -4x T slots: 14 mm -Clamping angle: rotatable, swiveling, tiltable -Foot recording: mm -Dimensions: 500/300/H210 mm Fpjdsd Dzlqopfx Afksh -Weight: 50.5 kg

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 260 x 1000 mm -T slots: 16 mm Fedpfx Afsb A Iqvekjph

Condition: good (used), Clamping table, clamping angle, T-slot table, milling machine table for shaping machine, shaping machine, high-speed planer, broaching machine, slotting machine, slotting machine, slotting tool, broaching machine, shaping machine, horizontal shaping machine, planing machine, Schepping Fpodpfx Afeiaql Tjkoh -T-slot plate: Mounting plate with adjustable angle of inclination -Groove width: 20 mm -Slot spacing: 105 mm -Overall dimensions: 640/400/H360 mm -Weight: 103 kg

Condition: excellent (used), Clamping surface: 890 x 425 mm Stop surface: 890 x 385 mm Upper part of the stop surface: 890 x 205 mm Plate thickness: 25 mm Thickness stop surface: 30 mm Fpsdjnpxnmopfx Afksh Condition: very good

Condition: excellent (used), Clamping surface: 890 x 425 mm Stop surface: 890 x 385 mm Upper part of the stop surface: 890 x 205 mm Fpodpsnpxnisfx Afksh Plate thickness: 25 mm Thickness stop surface: 30 mm Condition: very good

Condition: used, Universal milling machine table, angle table, setup angle, clamping table, presumed MAHO make T-slot table, add-on table for universal tool milling machine Table no.: 76-400-1 / 2210 05 00 Table size: 700 x 330 mm Overall height: 210 mm T-slot width: 12 mm T-slot pitch: 45 mm - Table plate with 7x T-slots, 12 mm each - Mounting surface 90°, 13 mm diameter holes, 14 mm elongated holes for fastening and 12 mm guide slot - Hole spacing, top mounting plate Ø 13 mm = 500 mm, 50 mm from the table surface (measured at center) - Hole spacing, middle mounting plate Ø 13 mm = 472 mm, 95 mm from the table surface (measured at center) - Elongated hole spacing, middle mounting plate = 475 mm, 140 mm from the table surface (measured at center) Fpedoxy Styspfx Afkjh - Elongated hole spacing, bottom mounting plate = 475 mm, 185 mm from the table surface (measured at center) Dimensions (L x W x H): 820 x 330 x 210 mm Weight: 61 kg In good condition

Condition: used, clamping surface 1,330 x 530 mm Fpsdpethtn Tofx Afksh clamping surface 1,330 x 600 mm - with drillings material thickness 55 mm weight approx. 615 kg

Condition: used, height 4,000 mm width 1,010 mm depth 1,200 mm framing thickness 90 mm Fedpfxod Scq Te Afkjph weight approx. 5,500 kg  

Condition: used, (8) Angle plates as detailed. 112779 600mm x 500mm 1800mm Angle Plate 112780 600mm x 500mm 1800mm Angle Plate 112781 600mm x 500mm 1800mm Angle Plate 112782 910mm x 700mm x 1800mm Angle Plate 112783 840mm x 690mm x 3370mm Angle Plate Fitted with cranked riser block allowing movement of top angle plate. Fodpfxeyi Tbfo Afkeph 112787 1020mm x 1010mm x 4280mm Angle Plate 112789 800mm x 750mm x 1190mm Angle Plate 112791 600mm x 500mm 1800mm Angle Plate

Condition: like new (used), Tapping dies R 2 for GA 4 Fpsdpjivzckofx Afkjh Tapping dies for Georg Fischer GA 4 tapping machine as new GF Art. 012209

Condition: excellent (used), Measuring stand Brand: Fischer Instrumentation (28635) Fpodpfewn E U Nex Afkeh Measuring table 80 x 80 mm Installation size 110 mm

Condition: used, gearing type: other, color: brown, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden, Body: Conversion kit from 20 to 24 inch tires, with Trilex rims approx. 200x available, new parts from stock! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Fjdsi Rmkwepfx Afksph - .

Condition: used, mileage: 1,001 km, gearing type: other, color: red, overall weight: 1,940 kg, empty load weight: 340 kg, maximum load weight: 1,600 kg, first registration: 01/1991, Year of construction: 1991, driver cabin: other, Vehicle location: Bovenden, ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Fjdpei N Nctjfx Afkeph - .

Condition: used, gearing type: other, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden, Body: Conversion kit from 20 to 24 inch tires, with Trilex rims 12.00-24 approx. 200x available, for VA axle 500,- Euro, for HA axle 400,- EURO, new parts from stock! New & Used ! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Fpedpfx Afsi Rmi Sekeh

Condition: used, Year of construction: 2008, The Fischer milk pasteuriser 5000 is an industrial-grade machine designed for pasteurizing milk on a large scale. Here are some details about such a pasteuriser: Fjdpfxsx Tdaue Afkeph - Capacity: The "5000" typically indicates that this pasteuriser can handle up to 5000 litres of milk per batch, making it suitable for large dairy processing operations. - Functionality: The pasteuriser is designed to heat milk to a specific temperature, holding it there for a required amount of time to eliminate harmful bacteria and pathogens while preserving the milk's quality and nutritional value. - Construction: Fischer machines are commonly made from stainless steel, ensuring hygiene and durability. The materials used are designed to withstand high temperatures and pressures encountered during the pasteurization process. - Design: It often features an insulated design for energy efficiency and may include a user-friendly control panel for monitoring and adjusting the pasteurisation parameters. - Efficiency: The pasteurising process is usually continuous, allowing for high throughput, which is essential for commercial operations to meet demand. - Temperature Control: It may include advanced temperature control systems to ensure precise pasteurization, which is crucial for product safety and quality. - Safety Features: Modern pasteurisers often come with safety mechanisms to prevent overheating or pressure build-up, ensuring safe operations. - Applications: Suitable for dairy farms, creameries, and food manufacturers looking to process large quantities of milk while adhering to health and safety regulations. Capacity: 5000 Litres per hour Temperatures: 4-55-65-78(90) - 55-65-4 c Stages exchange plates : 5 Outlets: Separator / Homogeniser / De Aerator / Holding Tube DeAerator: Included Heated: Steam with Heat Exchanger and Steam Valve Positioning Balance Tabk: Included Chart recorder: In control panel Control Panel: Included Divert Valve: Included Product Pump: Included Skid Mounted: On Stainless steel Skid Hot water Pump: Included Electrical Requirements: 3 phase 400 V / 50/60 hz Cooling: Connection with old water connection Condition: Still in use Available: 3 weeks from order

Year of construction: 2020, condition: used, FISCHER – Cantilever racking for installation in enclosed spaces. The racking must not be clad on-site without consulting FISCHER. Design according to the specifications. Racking No. 1 - single-sided (cantilever arms bolted on). Number of racks: The following information refers to 1 rack. 1 unit Number of uprights: 3 units Racking length (center-to-center distance): 2,500 mm Distance between uprights: 2 x 1,250 mm Upright height (hole pitch 100 mm): approx. 2,500 mm Top storage level: 2,200 mm Foot length: 1st side/2nd side 2,000 / 0 mm Cantilever arm lengths (total length incl. end stop): 2,000 mm Cantilever arms: 1st side/2nd side 4 / 0 units Desired load capacity per cantilever arm: 500 kg Load capacity per upright side (without considering the foot): 2,000 kg Max. floor pressure: 0.11 kN/cm2 Shipping weight per rack: 607 kg Color of uprights: fire red, similar to RAL 3000 Color of cantilever arms: fire red, similar to RAL 3000 1 spray can The profile thickness applies to 100% utilization of the rack load capacity. Seismic zone could not be determined. A verifiable or tested static analysis is available for an additional charge. Text for the static calculation: Important note regarding the static calculation of the storage system: The static calculations take into account the fundamentals according to Eurocode (DIN EN 1991-1-1, DIN EN 1991-3 and DIN EN 1991-1-4) and the framework conditions of the respective national annexes (NA) applicable in the countries where the system will be installed. Since storage systems are usually installed in urban or industrial areas, the requirements applicable to these areas (e.g., for Germany, ground category III and IV) are included in the calculation. Important note regarding building permits, please note: Storage systems may require a permit according to the respective state building code. In the event of an order placed with Fischer, the client undertakes to obtain the necessary public-law permits for the storage system. If the permit is not granted, or the granted permit is revoked or withdrawn, the contractor shall not be liable for this. In the event of installation by Fischer, we generally assume that a valid building permit is in place at the time of installation. Any necessary verifiable static calculations for the building application can be obtained for a fee; please contact us. Fjdozab Rcepfx Afkjph Cantilever racking: 1 unit 1,500.00 Foot rounding as a safety element: 3 units 13.50 per foot and side Storage location: Customer

Condition: excellent (used), functionality: fully functional, three-jaw chuck diameter: 160 mm, Three-jaw chuck eccentric – clamping chuck 1 piece used, very well-maintained Horvath Fischer eccentric clamping chuck (three-jaw chuck) with a diameter of 160 mm, maximum adjustable eccentricity: 25 mm, chuck mounting cylindrical with a diameter of 150 mm, complete with chuck key and one set of hardened stepped jaws as well as the installation and operation manual for the Horvath eccentric chuck, all likely in the original wooden box (Hahn & Kolb). Year of manufacture unknown. From our own inventory. Eccentric lathe chuck for clamping workpieces on a lathe. Price €195 net ex stock, plus packaging costs. Fodeg Umb Ejpfx Afksph All technical data subject to errors and omissions. We sell exclusively to countries of the European Community.

Condition: used, pressure 50 t chamfer lenght 1500 mm Fsdpjra Rrhefx Afkeph distance between columns 1220 mm Control Cybelec DNC 1200 closing speed 95 mm/min working feed 1-10 mm/sec work stroke 156 mm overrun time 59 ms tracking travel 6 mm throat 200 mm distance table - lower edge of ram 301 mm table width 160 mm table height 850 mm x-axis 550 mm travel R-axis +/- 50 Number of axles 3 (Y, X, R) St. weight ca. 3600 kg a lot of lower and upper tools incl. work light new control in 2003: Cybelec DNC 1200

Condition: ready for operation (used), Year of construction: 2001, functionality: limited functionality, For sale is a Fischercope H100C XYp micro-/nano-hardness testing system by Helmut Fischer (year of manufacture: 2001). The device was last used in a laboratory, but is currently not fully functional and is therefore expressly sold as defective / for repair or as a source of spare parts. Known issues: - Table advance movement does not function correctly (the table is positioned under the measuring head, not under the microscope – precise measurement is currently not possible). Likely an electronic issue. - The measuring table moves independently to the left – possibly a joystick failure. - Indenter change does not work correctly (the probe does not move fully to the end stop). Therefore, the device is particularly suitable for: • Repair by individuals with electronics expertise • Sourcing of spare parts Fodpfx Afeyu Nabokjph • Research / hobbyists The optical condition is good for its age.

Condition: good (used), Cleaning booth for component cleaning using a high-pressure cleaner. Previously used for cleaning components after 3D printing (e.g., for removing support material). Fjdpjza T Nkjfx Afkeph Operation via foot switch. In good condition.

Condition: used, Year of construction: 1993, press force 100 t stroke - 170 mm working lenght 3200 mm Fpodpfx Afjvuk Rdjksh dayligth 450 mm table dimensions 3220 x 800 mm speed down 50 mm/s speed up 150 mm/s working speed 7 mm/s oil volume 600 l power requirement 20,0 kW Weight 16,0 t dimensions (WxDxH) 3,7 x 2,5 x 2,6 m SPECIAL DEAL as is where is, WITHOUT additional work free loaded to truck year of manufacture 1975 - modernization 1993

Condition: like new (used), Year of construction: 2005, functionality: fully functional, GEARLESS FLEXOGRAPHIC PRINTING PRESS F&K FLEXPRESS 16S/10 Central impression flexographic printing press Fpodpfx Afjzafipekeh Manufacturer: Marga Fischer & Krecke Model: Flexpress 16S/10 Gearless 10 colors Materials that can be printed: PE, PP, OPP, PET, PA. Mechanical speed up to 460 m/min Maximum material width: 1200 mm Maximum printing width: 1150 mm Minimum/maximum print repeat: 370/800 mm Fully automatic turret unwinder and rewinder Unwinder inner diameter: 76 and 152 mm Rewinder inner diameter: 76 mm Maximum coil diameter: 1000 mm Thermal oil drying system Corona treater: 2 units AVT 100% camera system Bloss viscometers Year: 2005

Condition: excellent (used), For sale: a robust measuring device from the renowned German manufacturer AbaWerk Aschaffenburg. Made with a cast iron base and equipped with two hardened centering points for securing shafts and cylindrical workpieces. Perfect for use with toolmaker’s microscopes, measuring projectors, and in quality control applications. Technical specifications: Fedjw Sav Ijpfx Afkeph • Manufacturer: AbaWerk Aschaffenburg (Made in Germany) • Center distance: approx. 115 mm • Stable, heavy cast iron base – secure clamping • Allows rotation of the workpiece between centers • Condition: used, fully functional Manufactured to industrial standards – precision and durability make these units highly sought after in metrology and toolmaking environments.

Condition: used, Year of construction: 1999, pressure 200 t Fedpfx Afjy H N Iwekjph chamfer lenght 4100 mm Control CYBELEC DNC 900 stroke 260 mm weight of the machine ca. 16.000 kg dimensions of the machine ca. 4500x2400x3000 mm

Condition: used, Year of construction: 1978, functionality: fully functional, FISCHER & KRECKE 31 DF Type: Rotary flexographic printing machine Model: 31 DF | Year of manufacture: 1978 Manufacturer: Fischer & Krecke, Bielefeld, Germany Machine purpose: The machine is designed for flexographic printing on paper and various types of films, both for independent use and in a line with other machines (e.g., for bag production, cutting, or lamination). It is ideal for printing packaging materials, labels, bags, and other paper products in various weights. The machine is fully functional. Technical parameters Input material: • Number of rolls: 1 • Core diameter: 70, 76, 100, 150 mm • Max. roll width: 89 cm (throughput) • Max. roll diameter: 125 cm • Printing width: max. 85 cm • Material weight: 15–350 g/m² Printing: • Number of colors: 1–4 • Printing line: max. 64 lpi • Printing repeat: 290–660 mm • Speed: up to 250 m/min Longitudinal cut: • up to 60 g/m²: approx. 2 × 4 cm • over 60 g/m²: approx. 2 × 3 cm Gluing: paper + microtene, hot melt adhesive Output: • Core diameter: 70, 76 mm • Max. roll diameter: 107 cm Fischer Krecke 31DF printing cylinders Repeat number of cylinders number of gears Fpodpey Uc Uyefx Afkoh Repeat number of cylinders number of gears REPEAT NUMBER OF CYLINDERS NUMBER OF GEAR WHEELS 290 3 3 300 4 4 310 4 4 320 4 4 330 4 4 340 4 4 350 4 4 360 4 4 370 4 4 380 4 4 400 4 4 420 4 4 440 4 4 460 4 4 480 4 4 500 4 4 520 4 4 540 4 4 560 4 4 630 2 2 660 3 3