Used Ina Bearing Disc 20 Pieces for sale (43,759)

Condition: used, Year of construction: 1993, // currently being renovated in our workshops //   Manufacturer : Haagen & Rinau Model : Unimix SRM 200 Year : 1993 Type: vacuum mixer   Material : stainless steel   Vessel capacity: 406 L Maximum temperature: 143°C Pressure: – 1 / 3 bars   Double jacket capacity: 34 L Maximum temperature: 151°C Pressure: 4 bars   Slow mixing : Central stirring + scrapers. Fixed counter action Power: 7,5 KW Dedpfx Ajx R Aqaskksuw Fast mixing: emulsifier at the bottom of the tank. Suction and recirculation of the product. Power : 8 / 12 KW   Integrated electrical cabinet. Siemens S5 controller   Hydraulic unit: – Up and down of the cover with its mixing tool – Rotation of the cover with its mixing tool – Tilting of the tank – Up and down of the homogeniser at the bottom of the tank.

Condition: new, AVAILABLE EX STOCK ! Subject to prior sale. OD tube deburring machines clean and remove sharp edges on tubes and profiles caused by sawing. Dedpfx Akjd Ixbzjksuw Enables simultaneous outside and inside burrs removal without rotating the tube. Deburrs round, square, rectangular and many different tube and profile shapes deburring in few seconds.

Year of construction: 2006, condition: as good as new (ex-display), machine/vehicle number: 31331, DISTILLER DNP 2000 SEMI-AUTOMATIC STEAM DISTILLATION SYSTEM - PROTEIN-NITROGEN Raypa DNP-2000 Year of manufacture 2006, unused Protein-Nitrogen distiller based on the Kjeldahl method. Automatic, to analyse protein nitrogen in raw material samples or processed material for the food industry. Specific methods available. Results comply with regulations: EN/ISO, AOAC. NITROGEN DISTILLER – DNP-2000 Features • Twenty free user programs. • Additionally, the system has three fixed programs: – Ammonium sulphate test. – Preheating of the system. – Sample waste washing. Advantages • Optional kit for automatic titration. Duedpjfiliwsfx Akkew • Sample suction. • 20 user programs. • Pump calibration by end-user. • Steam generator with water level control. • Boric acid pump. • Open door sensor. Performance • Measurement range: from 0,1 to 200 mg of N. • Nitrogen recovery: ᐳ 99,5%. • Reproducibility: ± 1%. • Distillation time: 4 min/100 ml. • Cooling water consumption: 1,2 l/min. • Power: 2000 W (100%). Programmable parameters and values • Water for dilution: 0-240 ml. • OHNa solution: 0-240 ml. • H3BO3 solution: 0-240 ml. • Reaction time (delay): 0-30 min. • Distillation time: 0-30 min or indefinite. • Steam power regulation: 30-100%. Safety • Closed-door detection. • Digestion tube detection. • Over-temperature thermostat. • Uses in the food industry but also in oenology for vinification. • Documents: Manual instruction + mounting gaskets and socket • For the Romanian companies, there is the possibility of selling in installments. Price Euro 3.600 + VAT Ex Works Loaded of FCA: Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten / Subject to errors, changes, and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: ready for operation (used), Year of construction: 2008, Material thickness range: 0.6mm-10mm, sheet width min./max.: 2x700mm/2x1000mm, sheet length min./max.: 500mm/700mm, max. production speed: 1000 boxes/h, registration accuracy: +/-1mm, machine dimensions X/Y: approx. 6200mm/2950mm, weight: approx. 1000kg. Includes a pressure belt. Documentation available. An on-site inspection is possible. Duodpfxow Na Hbe Akkew

Condition: refurbished (used), Year of construction: 2009, Screen Printing Machine ADCO Squeegee Cutter SC061 (2009). Dodpsxk T Hpofx Akksuw Sartech is a company specializing in solutions for screen printing, automation, and robotics, as well as the manufacture of UV (electronic) or hot air tunnels.

Condition: used, machine/vehicle number: 27742, type of input current: three-phase, pressing force: 200 t, table width: 1,200 mm, table length: 1,000 mm, ram plate width: 160 mm, distance table to ram: 500 mm, overall weight: 23,600 kg, distance between stands: 350 mm, ram adjustment: 100 mm, stroke rate (max.): 35 1/min, MINALI mechanical eccentric press model 2MI 200, 200 tons, high-rigidity double-column frame, Italian industrial construction. Robust and heavy-duty machine (approx. 23,600 kg), ideal for: Blanking Sheet metal stamping Dusdpfoyutk Dox Akksw Bending Light deep drawing General mechanical operations Equipped with: Slide stroke 250 mm Ram adjustment 100 mm Table size 1200 x 1000 mm 35 strokes/min Main motor 20 HP Pneumatic system Centralized lubrication Pedal and push-button control Anti-repeat system Emergency stop Machine complete with original electrical cabinet and technical documentation.

Condition: used, Year of construction: 2001, - Fagor 8055 CNC control - Operating modes: manual/cycle-controlled - 8-fold tool turret VDI30 - Overhauled 2023 - Year of construction 2001 Technical data Capacity: - Center height: 200 mm - Center width: 1000 mm - Permissible Ø over guide bed: 400 mm - Permissible Ø over longitudinal slide: 370 mm - Permissible Ø over cross slide: 210 mm - Bed width: 300 mm Headstock: - Bore of main spindle: 65 mm - Main spindle nose: Camlock-n°6 / DIN 55027-n°6 - Morse taper of the main spindle: MK5 Dsdsvf I Diepfx Akkeuw - Spindle speeds: 2 - Constant cutting speed: 0-750 / 750-3000 rpm Feed rates: - Working feed Z/X: 0 - 7000 mm/min - Rapid traverse Z/X: 10 m/min Tailstock: - Tailstock shank Ø: 58 mm - Tailstock shank travel: 155 mm - Morse taper tailstock: 4 Motors: - Main motor power: 7.5 kW - DC motor Z-axis power: 6.8 Nm - DC motor X-axis power: 3.4 Nm - Motor pump power: 0.57 kW Dimensions: - Machine weight: approx. 2300 kg - Dimensions WxHxD: 2980 x 1730 x 1610 mm

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 759103-BDM20, Equipment: compressor, documentation/manual, Machine for Producing Hard Covers • Manufacturer: HÖRAUF (China) • Model: Classic Casemaker BDM20 • Year of manufacture: 2016 • Total production: 7,731,151 covers • Machine price: €85,000.00 Dsdpoy Ec Nxjfx Akkjuw The machine is in excellent condition and has been regularly maintained. Photos and a video of the machine are attached.

Condition: new, Year of construction: 2025, functionality: fully functional, The 4100×220 ton model is perfect for processing medium-thick sheet metal thanks to its large bending bed, making it ideal for series production and complex component manufacturing. • CNC numerical control with multi-axis management (6 axes) for synchronized movements and high precision • Robust steel mechanical frame • Motorized back gauge with servo control for accurate positioning • High-precision sensors and optical scales (GIVI) • Intuitive graphical CNC control system with automatic optimization of the bending sequence • Adjustable front supports for improved operator ergonomics • Promecam tool holders for quick tool change • Thanks to WILA CNC-controlled crowning and 6-axis control, the machine ensures outstanding bending quality even on long sheets and heavy gauges, enhancing productivity and repeatability TECHNICAL DATA: Press brake: MVD CNC 6 axes Model: B 220 Series Year: 2025 Condition: New CNC 6 Axes: ESA 650 Touch Screen Duedpfjyk Ul Isx Akkow Crowning: Wila CNC-controlled Bending force: 220 Ton Bending length: 4100 mm Distance between uprights: 3600 mm Stroke: 260 mm Opening: 465 mm Throat depth: 410 mm Table height: 970 mm Approach speed: 180 mm/s Return speed: 140 mm/s Working speed: 10 mm/s Oil tank: 290 l Main motor: 18.5 kW Dimensions: 5620x2530x3035 mm Weight: 12,750 kg

Condition: used, Cutter ALPINA 200 Djdoyvtvkspfx Akksuw

Year of construction: 2012, condition: new, TIMKEN TAPERED ROLLER BEARINGS NP342204-90WA2 NEW NEVER USED 14 UNITS AVAILABLE WEIGHT 320 KG/ EACH PACKED INTO ORIGINAL WOODEN BOX WAREHOUSE LIQUIDATION ADDITIONAL BEARINGS AVAILABLE: 22324 EDK FAG x2 un. 71976MP.P5.UO FAG x1 23276 BMB FAG x2 23222-E1-A-K-M FAG x1 23224 HL BM S x1 F36204 FAG x3 STF374KV5051GAS3 NSK x3 2456 CPM ITALY x47 NP838887 TIMKEN x2255 R425-1G4S7 NSK x2 2TR19H C3 FP KOYO x1 31318F FERSA x165 NP942053-902-A1 TIMKEN x12 2TR19H C3 FP KOYO x1 24168-B-C3 FAG x 2 01/02/0274/C5309 x2 NNU6810 NTN x3 612833-B SKF x6 CP354256-90001 TIMKEN x2 NU2324 EC ML SKF x1 23238C E4 S11 NSK x4 2IE.083.00 x2 SL182244-BR-A INA x1 Dujdpfx Asqpd Snekkow 23088-K.MB.R1000.1130.J15B FAG x2 612833-B SKF x6 PRICE FOR NEGOTIATIONS

Condition: good (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, total width: 2,400 mm, The Lamina Gluer is a manually fed, in-line folding, gluing, and taping machine. Thanks to its smart design, it can handle different sizes and materials. Dujdpoxwcwwefx Akksw Tool-free setup enables quick changeovers, even for short production runs. Optional machine features include cold glue, rear support unit, working station, tape applicator, and more. The Lamina Gluer is a straight-in-line gluing machine built on a robust frame made of extruded, anodized aluminum profiles. The machine offers manual feeding as standard, with an optional automatic feeder for die-cut, creased, and slotted materials. The operator positions the blanks, and the hot melt unit applies adhesive as the material passes through the machine. Glue line length and exact position can be pre-set using a programmable logic controller (PLC) and a touchscreen interface. A system of pressure rollers ensures perfect adhesion and guides glued blanks onto a pull-out tray, which is easily adjustable for various sizes. The machine comes equipped with adjustable and interchangeable side guides, enabling efficient gluing of 2-piece boxes. The Lamina Gluer is supplied ready for connection to electric and pneumatic systems. The Lamina Working Station is an additional option for the Lamina Gluer. Products are fed through the Gluer, which applies pre-programmed glue lines, and continue into the Working Station, where they are positioned on vacuum belts. A second piece is mounted and positioned using side lays and pneumatic stops for high-quality finishing. The unit can be adjusted for a wide range of products, from single- to multi-part displays and boxes, large back supports, shelves, and more. Transport The material is conveyed by four vacuum belts that bring the sheets to a stop bar for subsequent operations. The vacuum is generated by a fan that secures the sheets for optimal handling and precise registration. During production, the operator has full access above the sheets for additional mounting, thanks to the vacuum belt design. Pressure Rollers Material passes through two pressure rollers at the machine’s end for optimal adhesion. Registration Registration accuracy is +/- 1 mm and is achieved by a combination of photocell sensors and pusher guides. The operator uses a side lay guide to simplify the mounting process at the station.

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, The Lamina Gluer is a manual fed in-line folding, gluing and taping machine. In very good technical condition, after total renovation. The tool free set-up allows a quick change over even for short runs. Options for the machine include cold glue, back support unit, tape applicator etc. Machine in is at our premises, testing on-site is possible. Max Sheet Size: Width: 2200 mm (87") Min Sheet Width: 70 mm (3") Dusdpfxoyzfkkj Akksw Electrics: 208 V, 3 phase, 60 cycle; or 400 V, 3 phase, neutral, 50/60 cycle; or Specified Air Requirements: 6 bar; 80 psi; 34 CFM, Approximately 50 L/min

Condition: good (used), Height 2300 Width 2700 mm Length 2200 mm Dujdpfx Ajrn S Azskkjw Weight 5000 kg Voltage Electrical: 400V 50Hz 3N Installed Power 102 kw Main material Stainlees Steel Cutter Type Vacuum Bowl Cutter Bowl made of Stainless steel Bowl capacity 200 l Knives amount 6 pc. Knife shaft revolutions 680-5050 rpm Bowl revolutions 4-16 rpm

Condition: used, Year of construction: 2014, functionality: fully functional, Type: Manual Fed In-line folding, gluing and taping machine Manufacturer: Lamina system AB, Sweden Model: Gluer 2200GL Year: 2014 Max. format width: 2200 mm Min. format width: 70 mm Gluing unit: Nordson Production speed: 0 – 40 m/min, infinitely variable. Power: 5 kW 20 A Dedpfxoxnzn Nj Akksuw Connection: 3x220 VAC PE 50/60 Hz Compressed air: 6 Bar Control console: PLC control with Touch Screen Machine size: W 2800 x L 2550 x H 1450 Weight: 950 kg Brochure find below

Year of construction: 2022, condition: like new (used), functionality: fully functional, NEW Side Channel Blowers (EX/ATEX) – 25kW & 2.2kW | High-Pressure Air Pumps Description: For sale: Brand new, never used, and never mounted high-performance side channel blowers manufactured by Blooming (China). These units are equipped with Explosion-Proof (EX) motors, making them ideal for hazardous environments such as chemical plants, grain silos, or wastewater treatment facilities. Unit 1 (2 Available): Model: 2RB943-7BH47 Power: 25.0 kW (50Hz) Voltage: 380V (Three-phase) Motor: EX Motor (Explosion-proof) Condition: New, in original shipping condition. Applications: Industrial vacuum systems, heavy-duty aeration, pneumatic conveying. Unit 2 (1 Available): Dsdoy H Nnkjpfx Akksuw Model: 2RB420-7AH41 Power: 2.2 kW (50Hz) Voltage: 380V (Three-phase) Motor: EX Motor (Explosion-proof) Condition: New, never installed. Location: Plovdiv, Bulgaria (Ready for shipping or local pickup). Price: RB943-7BH47 - 2850 Euro, 2RB420-7AH41 - 400 Euro (Discount available for purchasing the full set).

Condition: reconditioned (used), functionality: fully functional, The Lamina FA Blackline 1620BL is a highly accurate, high speed sheet-to-sheet fully automatic laminating/mounting machine. The machine can handle most of the existing materials in the market. The modular construction allows easy upgrading and maintainance resulting in a machine that lasts for many years. Max. sheet size: width: 1600 mm length: 2000 mm Min. sheet size: width: 350 mm length: 350 mm Feeder Capacity: Top feeder: 500 mm (20”) Bottom feeder: 800 mm (32”) Top Sheet: 130 to 450 g/m2 1 pts = 28,25 g/m2 Bottom Sheet: Duodpfsw Hrrrsx Akkjw From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 corrugated from 0,6 - 10 mm (0,016” - 0,39”) Air Requirements: 6 bar; 80 psi; 34 CFM, Approximately 500 L/min Can be additionally equipped with Optional Laminating Machine PB 1600 Pressure Belt

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, working width: 720 mm, Model: SFML-720C Weight: 840 kg Dedpeyxl Tyefx Akkjuw Power: 8.5 kW Voltage: 220 V Date of manufacture: 2011 CE certified

Condition: new, power: 110 kW (149.56 HP), Year of construction: 2026, Powerful Magnum Stationary Concrete Mixing Plant Magnum 120 is an ideal concrete plant for all concrete producers. Duodpswfri Iofx Akkjw It is manufactured to serve for years without corrosion in nature. Complies with international quality management and shipping standards. Magnum 120 works with a fully automatic system. After the installation, local personnel are trained and the concrete plant is delivered. -Plant Capacity 120m3/s -Mixer Type Twinshaft Mixser -Compacted Concrete Mixer 3m3 -Dry bulk Mixer 4.5m3 -Mixser Motor Power 2x55kw -Aggregate Bunker 4x30m3 -Aggregate weighing Belt 1000x14000 -Mixer Feeding Conveyor 1000x32000 -Aggregate Weighing 6500kg -Cement Weighing 1700kg -Water Weighing 1000lt -Additive Weighing 40kg -Cement Screw Ø273 (Optional) -Cement Silos (optional) 60-80-100 ton -Compressor 7.5kw

Condition: new, Year of construction: 2026, machine/vehicle number: KF0409HKP20260601, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 380 V, type of input current: three-phase, pressing force: 100 t, stroke length: 200 mm, operating speed: 10 mm/s, reverse speed: 170 mm/s, throat depth: 400 mm, total length: 1,685 mm, total width: 2,300 mm, working width: 3,200 mm, workpiece length (max.): 3,200 mm, workpiece height (max.): 370 mm, bending angle (max.): 90 °, number of spindles: 4, sheet thickness aluminum (max.): 6 mm, sheet thickness steel (max.): 4 mm, warranty duration: 12 months, Mechanical Structure 1. Frame: Integral thick steel plate welded structure with shot blasting stress relief, high torsion resistance, stable long-term precision; processed by large CNC boring & milling machine. 2. Sliding ram: Connected to cylinders via spherical joints; self-lubricating rectangular guide rails; fitted with 0.005mm grating scales on both sides for synchronous closed-loop detection. 3. Worktable: Equipped with motor-driven integral mechanical crowning wedge to compensate deflection. 4. Backgauge: Servo-driven ball screw with dual linear guides, modular multi-axis expandable design, fast and high-precision positioning. 5. Tooling & accessories: Quick clamping upper dies, dual V lower dies for fast mold change; adjustable front support stand with horizontal & vertical movement. 6. Anti-deviation structure: Dual-side grating scales eliminate throat deformation interference, strong anti-unbalanced load capacity. 7. Cantilever operation box conforming to ergonomics for easy operation. Hydraulic System 1. Integrated PHUCHIN hydraulic manifold, compact layout and zero leakage. 2. Original SKF/PARKER sealing rings for long service life. 3. Special oil tank with high cleanliness; oil level & temperature visual display; built-in overload protection. Electrical & Control System 1. Main SCHNEIDER electrical components, anti-interference and safe. 2. Movable foot switch with emergency stop; neat heat-dissipating electrical cabinet wiring. 3. DA53T CNC Controller (4+1 axes standard, expandable to 6+1 axes): - 15-inch color LED touch screen, multi-language support, mouse compatible - Storage: 999 workpieces, 20 upper molds + 20 lower molds, 100 programs with 25 steps each - Multiple ports: USB, RS232, Ethernet; supports robot linkage & automatic production line connection - Real-time mold graphics, programmable step speed, dual-machine linkage function Core Component Brands Hydraulic system: PHUCHIN/Bosch Rexroth; Oil pump: Hi-Tech/SUNNY; Grating scale: Italy GIVI; Seals: SKF/PARKER; Electric parts: Schneider; Main motor: Siemens/Lido Other Advantages - Comply with national JB & GB standards for press brakes; Noise ≤82dB(A) - 12-month warranty; 8-hour response & 24-hour on-site after-sales service Dsdowfwkwepfx Akkouw 二、.Technical Parameters 1. Rated bending force: 1000KN 2. Max bending length: 3200mm; Column distance: 2700mm 3. Ram stroke: 200mm; Max opening height: 450mm; Throat depth: 400mm 4. Speed: Rapid traverse 180mm/s, working speed 0–10mm/s, return speed 170mm/s 5. Main motor power: 7.5KW; Power supply: 380V/50Hz three-phase 6. Precision Index - Y1/Y2 ram positioning accuracy: ±0.02mm; Repeat positioning: ±0.01mm - Workpiece angle tolerance: ±30' full length - X-axis backgauge repeat accuracy ≤±0.01mm; R-axis ≤±0.02mm 7. Environment requirements: Temp -5℃ ~ 40℃, humidity 55–85%RH, altitude ≤1000m 8. Standard axes: Y1,Y2,X,R,V (4+1 axes)

Condition: good (used), bridge crane, hall crane, assembly crane, flange hub, bearing cover Dedpfxev Il Iqo Akksuw -Bearing cover: Type 260x150x54 .: 1031 4155 -Number: 6x bearing caps available -Price: per piece -Dimensions: Ø 260 x 55 mm -Weight: 7.4 kg/piece

Condition: excellent (used), 2-hole flange bearing -Type: 01CJT05 -Designation/Type: Flange bearing unit -d = Inside: 25 Price: per piece -Number: 71x available Duedpsb A S Hmsfx Akkew -Weight: 0.6 kg/piece

Condition: excellent (used), Axial tapered roller bearing Djdjb A Rlxopfx Akksuw -Type: Number: 9x axial tapered roller bearings available Price: per piece -Weight: 1.3 kg/piece

Condition: excellent (used), Bearing, ball bearing -Condition: unused -Diameter: Ø 35 mm -Number: 9x bearing blocks available -Price: per piece Djdpsb A S Hgjfx Akkjuw -Weight: 1.3 kg/piece

Condition: good (used), mileage: 25,597 km, power: 173 kW (235.21 HP), first registration: 06/2008, fuel type: diesel, tire size: 280 / 75 / R22.5, axle configuration: 4x2, wheelbase: 3,300 mm, fuel: diesel, color: yellow, driver cabin: day cab, gearing type: automatic, number of gears: 4, emission class: euro5, suspension: steel, total length: 5,250 mm, total width: 2,550 mm, total height: 3,500 mm, permissible axle load (axle 1): 12,000 kg, permissible axle load (axle 2): 25,000 kg, Year of construction: 2008, Equipment: differential lock, Technical information Number of cylinders: 6 Empty weight: 8.150 kg GVW: 8.150 kg Transmission Transmission: Allison, 4 gears, Automatic Axle configuration Tyre size: 280 / 75 / R22.5 Make axles: Terberg Brakes: drum brakes Suspension: leaf suspension Front axle: Max. axle load: 12000 kg; Steering; Tyre profile left: 70%; Tyre profile right: 70% Rear axle: Double wheels; Differential lock; Max. axle load: 25000 kg; Tyre profile left inner: 25%; Tyre profile left outer: 25%; Tyre profile right outer: 25%; Tyre profile right outer: 25% Duedpszh Ubisfx Akksw Interior Interior: grey Number of seats: 1 Condition Technical condition: good Visual appearance: good Number of keys: 1 Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL