Used Idromec Scrap Shear for sale (1,828)

Year of construction: 2024, condition: new, Motorized guillotine shears Technical data Cutting capacity: 2,5mm Cutting length: 2550mm Cutting angle: 1°40' Ijdpfx Aohk Nf Rsmietg Stroke rate/min: 35 1/sec. Motor power: 3kW backgauge range: 550mm table width: 400mm table height: 850mm height: 1260mm width: 1350mm length: 3100mm Weight approx.: 1540kg

Year of construction: 2022, condition: new, Motorized guillotine shear MS 1303 Technical data: Sheet width: 1350 mm sheet thickness: 3,0 mm Ijdpfxohk Nfuj Amiotg stand width - table width: 400 mm working height: 850 mm Control: conventional

Year of construction: 2024, condition: new, Make: DURMA Type: MS 2504 year of manufacture: 2022 cutting length: 2550 mm sheet thickness: 4 mm Control: EZM9910 Operating hours: 0 Cutting angle: 1°30 Strokes per min.: 42 motor power: 7,5 kW backgauge range: 750 mm table width: 450 mm table height: 800 mm dimensions L/W/H: 3200x2300x1350 mm Weight: 3780 kg Standard equipment control unit EZM9910 backgauge range 750 mm programmable via control unit Jvcmke Plastic inserts for hold-down 1 side stop and 2 sheet support arms Finger guard Portable foot switch with emergency stop Spring loaded stop in T-slot of the support arms Ball screw Ikh7877 Table plates with ball rollers Upper knife with 2 cutting edges Lower knife with 4 cutting edges CE marking Extended equipment Adjustable angular fence 0-180 The machine can be inspected and demonstrated at any time by appointment in our demonstration center in Staufenberg. Itjdpfx Amed R Er Dsiog Further machines are ready for demonstration at our facility in Staufenberg. We will be happy to provide you with further information on request.

Condition: used, Hydr. swing cut guillotine shears HERA type HSS III No. 598 Year of manufacture 1986 Cutting length 3100 mm Cutting thickness 3 mm Stand projection 200 mm Blade strokes 25 strokes/min. Mains connection 380 Volt, 50 Hz Motor power 3 kW - Motorized adjustable backgauge 1070 mm - Actual value digital display for the backgauge Iedpfx Aeq A I Upomietg - Cutting gap adjustment - Cutting length adjustment - Front side stop left 1000 mm - 4 sheet metal support arms 1000 mm - el. foot switch Space requirement without sheet support arms L x W x H 3630 x 2200 x 1600 mm Weight approx. 4000 kg good condition

Condition: used, Hydraulic notching machine with adjustable angle SIMASV model AV 220-6PA Serial no.: C1524 Year of manufacture: 1996 Blade length: 220 mm Material thickness (steel): 6 mm Material thickness (stainless steel): 4 mm Table dimensions: 950 x 790 mm Table height: 940 mm Motor power: 3 kW Power supply: 400 Volt, 50 Hz - Operation via push-button or foot switch - Adjustable notching angle from 30° to 140° - Angle adjustment via 2 handwheels (right and left) - Hydraulic clamping for the adjustable blades - Electric foot switch - 2 adjustable stop rails with angle scale Iodpfx Amorzfh Hsistg - Multiple millimeter scales integrated into the table top - HSS blades newly ground, as new Required space (L x W x H): 1000 x 950 x 1470 mm Weight: 750 kg Very good condition

Condition: repair required (used), Year of construction: 1987, machine/vehicle number: 90071000, overall weight: 15,000 kg, Currently, the “lateral pressure” is stuck because material (sheet metal) has shifted and become wedged under the side block. Itodpfx Aoy Tlzasmiog

Condition: excellent (used), Slate shears TS NS1 in case - Attachments for cordless screwdriver - As new Ijdsy Sayzepfx Amistg

Condition: used, Year of construction: 1993, Plate shear Manufacturer: LVD Itedpfx Amoy Atn Heiog Type: MVSB 62/8 Year of manufacture: 1993 Working length max.: 6,200 mm Sheet thickness: 8 mm Weight approx.: 13,000 kg ä19526

Condition: used, Year of construction: 1997, sheet width 3100 mm Iodpfsy I Dbbox Amietg plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm cutting angle 0.5 - 2.5 ° cutting gap adjustment 0.05 - 0.8 mm no. of strokes 12 - 50 Hub/min back stop - adjustable 1000 mm Control DELEM DAC 360 oil volume 120 ltr. engine output 9.5 kW weight 7000 kg. range L-W-H 3950 x 1950 x 1680 mm well-maintained condition (!!) equipped with new DELEM control unit Equipment: - electro-hydraulic, guided plate shear - DELEM CNC control unit type DAC 360 * front control panel, swiveling front left - Electro-hydraulic cutting angle adjustment - Electro-hydraulic cutting gap adjustment - electro-motorized backgauge, with ball screws - 1x extra-long side fence with T-slot mm scale

Condition: good (used), functionality: fully functional, Year of construction: 2006, Used M Shear from Safan Model: M Shear 430 6 TS 200 Capacity: 4300 x 6 mm Automatic setting of cutting gap, cutting angle, and back gauge Equipped with pneumatic sheet support at the rear Return to sender feature Scrap container Entry safety barrier Itodsy H D I Eopfx Amisg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, control type: NC control, working width: 3,200 mm, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, Equipment: CE marking, angle stop, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, Motorized Guillotine Shear Make: Schröder Model: MHSU V 3200 x 3.0 Year: 2007 Technical Data Manufacturer: Schröder Model: MHSU V 3200 x 3.0 Year of manufacture: 2007 Working length: 3200 mm Sheet thickness: 3.0 mm Strokes per minute: 34 (continuous mode only) Itjdpey R Na Uefx Amiog Drive power: 9 kVA Dimensions: L 4.0 x W 1.9 (plus support arms 0.6m) x H 1.5 m Weight: 3300 kg Equipment - POS 100 control system with 9-fold program memory - Pneumatically controlled sheet support device - Linear front guide for movable T-slot consoles - 2 movable support arms on linear guide - Right-hand extended back gauge with T-slot and scale (currently dismantled) - Hold-down device with hard rubber strip to protect polished sheets - Rear area safeguarding via light barrier - Selector switch for single and continuous stroke - Foot switch All information provided without guarantee. A demonstration is possible at any time in our showroom.

Condition: excellent (used), Technical condition: very good Visual appearance: very good Please contact Ferdinand Pater for more information Ijdpfx Amet Hty Usistg

Condition: used, LVD Shear Type HST C-10/31 Capacity 3000 x 10 Itedpfsx Tqtbex Amisg

Condition: used, functionality: fully functional, Guillotine Shear Brand: SAGITA Itodpfx Amsynglnjijg Capacity: 4000 x 8 mm Backgauge capacity: 1100 mm Dimensions: 4750 x 2250 x 1850 mm Weight: 12 t Blade gap adjustment ELGO backgauge Rear sheet support

Condition: refurbished (used), functionality: fully functional, Shear Brand: AMADA PROMECAM Itsdpfx Asxfbb Rsmiog Model: GP1230 Capacity: 3000 x 12 Back gauge: 1000 mm Rear pneumatic sheet support Cylinder seals replaced – Blades sharpened – In compliance

Condition: excellent (used), Capacity 2000 x 4 Overall dimensions 3000 x 2000 Rear sheet support Itodsuml R Espfx Amijg

Condition: good (used), functionality: fully functional, Year of construction: 2020, Hydraulic Guillotine Shear Make: Fasti Type: 530 – 3000 x 6mm Year: 2020 Technical Specifications Manufacturer Schröder Model 530 - 30/6 Year of Manufacture 2020 Sheet Width 3040 mm Sheet Thickness 6.00 mm (400 N/mm²) Blade Gap Adjustment 0.5 – 1.8 mm Strokes per Minute 24-61 spm Drive Power 12.0 kW Space Requirement (LxWxH) Approx. 4.00 x 3.00 x 1.96 m Weight Approx. 6.5 t Equipment/Features - 12” touchscreen controller PSC 150 on swiveling panel - Energy-efficient drive for frequency-controlled motor and pump - Automatic blade gap adjustment - Adjustable hold-down pressure selectable via the control system - Motorized backgauge 10–1000 mm with ball screw spindles - Pneumatic sheet holding device - LED cutting edge illumination - Programmable start and end position for the blade beam - Angle stop mounted on the left incl. electronic length measurement system, fine adjustment, and lateral flip stop with linear guide, 1000 mm - 2 backgauge arms with ball rollers, adjustable on linear guides - Table support made of stainless steel sheets with ball rollers - Rear area secured with light barrier - Scrap and small parts chute to the front incl. "Return to Sender" function - Movable table extension mounted on guide rail - Finger guard, can be raised approx. 1500 mm, incl. electrical safeguarding All information provided without guarantee. A demonstration is possible at any time in our showroom. Iedpey R Dcwjfx Amietg

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, control type: CNC control, actuation type: hydraulic, controller manufacturer: Amada, sheet thickness (max.): 6 mm, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, type plate available, Amada GX 630 +SE30 +STACKER FULL OPTIONS Shear GX630 Discharge conveyor + lift system + scrap bin SE30 Constant level stacker ENC 30 This Amada guillotine shear comes equipped with a combined discharge conveyor, lift system, and scrap bin. At the rear, it features an original Amada discharge conveyor with material stacker. The system is frequency-controlled and maintains a constant drop height for material stacking. The machine is in very good condition and has only been used for thin sheet material. All documentation and service reports are available. Machine specifications: Cutting length: 3050 mm Max. thickness: 6 mm steel Control: Amada Automatic cutting angle adjustment Automatic cutting gap adjustment Backgauge: 1000 mm Lift system: pneumatic Dimensions (L x W x H): 3790 x 2230 x 1860 mm Ijdjy Sbu Hopfx Amijtg Weight: 6150 kg

Condition: good (used), Year of construction: 2001, sheet width 3050 mm plate thickness 10.0 mm thickness at "Niro-steel" 6.0 - 8.0 mm down holder 13 Stück distance between columns 3070 mm cutting angle 1.0 - 4.0 ° no. of strokes ~ 22 Hub/min Control ELGO P8511 oil volume 240 l voltage 400 V total power requirement 15.0 kW weight 8000 kg range L-W-H 3550 x 2350 x 1900 mm good condition (!!) from a maintenance workshop Isdpfx Amoy Ig R Eoietg Equipment: - NC electro-hydraulic guillotine shears - heavy / stable welded construction (machine body) - NC ELGO digital control unit "P8511" - NC electro-motorized backgauge on ball screws - electro-hydraulic cutting angle adjustment * Front analog cutting angle display - 1x stable side fence, with T-slot and mm scale - 3x stable support arms, with T-slot and mm scale - Ball castors in the work table incl. recessed grips - Front finger guard - can be folded up at the front - 1x freely movable foot switch - 2x front emergency stop button - Rear safety guard (protective grille) - original operating instructions

Condition: used, Year of construction: 1976, round bar steel 28 mm square edge steel 25 mm L-beam 80 x 8 mm notching cap. mild steel max. 7 mm cutting capacity of the vertical shear 350 kN Punch power 190 kN shear: flat material 100 x 11 mm shear: length of knifes ca. 175 mm total power requirement 1,5 kW weight of the machine ca. 0,5 t Itsdswm Rmnspfx Amijg dimensions of machine L x W x H 1,0 x 0,5 x 1,5 m

Condition: used, Year of construction: 1983, round bar steel 50 mm square edge steel 40 x 40 mm L-beam 140 x 13 mm Punch power 900 kN hole punching press: throat 510 mm hole punching press: max. length of stroke 29 mm hole punching press: capacity (dia. x thick.) 31 x 20 mm notching: l + T material 80 x 14 mm no. of strokes 40 / 45 Hub/min Itsdpfjvh I T Njx Amiog total power requirement 4 kW weight of the machine ca. 3,7 t dimensions 2,1 x 0,7 x 2,12 m Accessories: various punches and dies

Condition: used, Year of construction: 1990, sheet width 3050 mm plate thickness 12 mm distance between columns 3100 mm table height over floor 900 mm cutting angle adjustment 0,5 - 3 ° no. of strokes 6 - 13 Hub/min back stop - adjustable 1000 mm down holder 18 St oil volume 350 l total power requirement 22,5 kW Ijdpfx Amou Uu Smeiotg weight of the machine ca. 8 t dimensions of machine L x W x H 3,96 x 2,10 x 2,22 m - with adjustment of cutting gap - Accessories: electr. back gauge, spare knives

Condition: used, Year of construction: 1988, sheet width 3000 mm plate thickness 6 mm distance between columns 3100 mm cutting angle 1°15´ no. of strokes 16 Hub/min Itodpfx Amjvh Ivkeisg down holder 16 Stück back stop - adjustable 750 mm total power requirement 11 kW weight of the machine ca. 5,7 t dimensions of machine L x W x H 4,1 x 2,08 x 1,78 m Accessories: electr. back stop with DRO ELGO electric, angle front stop

Condition: good (used), Mubea Muhr und Bender section shear combined Itedpfx Amsncc Hueijg Type: KBL 16 Dimensions: 200x75x197 cm LxWxH

Condition: ready for operation (used), Year of construction: 1977, Immediately available from site: Universal profile steel shear with punching unit Peddinghaus Model 210 / 16 Year of manufacture: 1977 Pressing force: 60 t Punching: 27 x 19 mm Round steel: 50 mm Square: 45 x 45 mm Flat steel: 150 x 19 mm Punching: 27 x 19 mm L profile 90 degrees: 130 x 13 mm L profile 45 degrees: 100 x 11 mm T profile 90 degrees: 130 x 15 mm T profile 45 degrees: 100 x 11 mm Drive: 5.5 kW Weight: 3 t Many punching tools included Iedpfxjy Tmyqe Amistg Price: €1,500 plus VAT, ex site