Used Homag 4-085-08-0202 for sale (59,771)

Condition: good (used), Year of construction: 2013, Wood chip boiler for steam up to 150 degrees or for water only with hydraulic feed system maximum thermal output up to 850 kW Rsdpsy Dfd Nofx Aqusu suitable for dry material

Condition: excellent (used), 203018) SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 20 Panels thickness (min/max) mm 8 / 60 NEW (in 2024) Numerical Control EDGETEQ MOD - Power Touch (WoodCommander) Adjustable Feeding speed up to 25 m/min In-feeding system EZ 14 Rjdsyyvp Uopfx Aquju Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 2 x Kw 3 Glueing Unit (P.U.R. Glue + Quick Melt system) Band Pressure zone, adjustable by N.C. Edge coils supporting unit (with No. 2 reels) Snipping (end-cutting) unit HL 84 (2 x Kw 0,5 ca.) Pneumatic swivelling and adjustment Rough Trimming unit BF 20 (2 x Kw 1,5 ca.) Multi Function Unit (Profile contour Trimming) FK 11 (2 x Kw 0,4 ca.) Profile edge scraping unit Finish processing unit (Glue scraper + Buffing unit) FA 11 203019) Panels Return System "LIGMATECH" Mod. ZHR 541/L/095 (with Portal bridge and 360° rotating vacuum head)

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2015 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) Rsdpoy A I Sgefx Aquju - Jointing trimming 2 motors (clockwise, counterclockwise), 2x4kW, rear motor w. jumping function GLUING SECTION V20, consisting of: - QA60 glue application unit, with PTFE-coating (Teflon), with manual quick-adjustment glue gates - pneumatic clamping of glue application in mount - Pre-melter for EVA glue - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - modes: edge rolls, (veneer) strips, solid wood edging - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK85 horizontal, 2 motors, with straight/chamfer cutting function - Rough trimming 2x1.15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with various trimming heads, motorised adjustment - Universal trimming unit, (e.g. grooving), 3.5 kW, tiltable, w. electro-pneumatic jumping control - Multi-Profile (radius-) scraping MN11 with automatic positioning by NC-axis (CAN) - Flat scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers) - Buffing unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: ready for operation (used), Year of construction: 2002, number of axes: 4, This HOMAG Optimat BAZ41/30/K Event was manufactured in 2002. A used CNC processing center with a working area of 3000 x 1050 mm. Consider the opportunity to buy this HOMAG Optimat BAZ41/30/K Event CNC processing center. Contact us for more information. Redex D Dvnepfx Aquju • Working area: 3000 x 1050 mm

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) 4 axis Goose-neck type Numerical Control Power Control - Software woodWOP Safety cabin (enclosure) of the working head Working table with pods and rails- No. 6 Support rails Front emergency carpets LASER system on X-axe for the rails positioning and on Y-axe for the vacuum pods positioning Automatic Tools Changing System Redjyxn Tiopfx Aqusu No. 2 Tools storage plates W8 (No. 8 rear spaces) + (No. 8 lateral spaces) Max. useful working area (X - Y - Z) mm 3130 x 1250 (1550) x 100 (150) No. 2 Working areas - 1 x Vacuum pump (capacity 70 m3/h) Motorized carpet to evacuate chips and wastes Separate electric and command cabinet Total installed power A 32 WORKING GROUPS (TOP): No. 12 Independent vertical boring spindles (High Speed 7500) No. 6 Independent horizontal boring spindles (No.4 in X-axe + No. 2 in Y-axe) Drilling head motor-power (Kw) 2,3 Circular Grooving Saw (tiltable 0°- 90°) diam. (mm) 125 (N1 X-Y 90°) No. 1 Vertical electro-spindle: HSK63 (KW 9) OPTIONAL: Drilling Group with No. 4 horizontal boring spindles (Crosshead) PROFESSIONAL BARCODE READING SYSTEM

Condition: used, machine/vehicle number: 008402, Max. panel width: 4300 mm Max. panel length: 2500 mm Main saw blade projection: 110 mm No of Rip saw Grippers: 9 Rodpfx Aqoygtbmeuju No of Cross Cut Grippers: 4

Condition: new, functionality: fully functional, power: 200 kW (271.92 HP), color: other, Year of construction: 2026, Equipment: ABS, CONSTMACH jaw crushers are designed to offer high durability and superior crushing performance, making them ideal machines for primary crushing operations in quarries and mines. They have the capacity to process a wide range of materials, from the softest limestone to the hardest types of granite and basalt. Their robust construction, high flywheel torque, and special jaw geometry ensure high-efficiency crushing of material into uniform sizes. The advanced hydraulic adjustment mechanism allows for easy adjustment of the desired output size and minimizes operator intervention. CONSTMACH jaw crushers ensure long-lasting use with their forged chrome-nickel steel pitman structure, heavy-duty bearings, and automatic lubrication systems. The welded main frame, which has undergone thermal stress relief treatment, maintains maximum durability even under high vibration. The user-friendly maintenance design provides an uninterrupted and safe working environment during production processes. These machines can be integrated into stationary or mobile crushing plants, offering high flexibility for projects. CJC-140 Technical Specifications Jaw Size: 1,400 x 1,100 mm Motor Power: 200 kW Shaft Speed: 220 rpm Weight: 52,000 kg Redpfexqf Ryex Aquju Min./Max. Adjustment: 120 - 280 mm Production Capacity: 420 - 850 t/h Why Choose CONSTMACH Jaw Crushers CONSTMACH is a symbol of quality and reliability in crushing and screening technologies. Each jaw crusher model undergoes production processes that comply with international standards, ensuring maximum performance, low operating costs, and a long service life. With customizable design options tailored to customer needs and an extensive service network, it supports your business's uninterrupted production goals. In terms of reliable performance, engineering quality, and after-sales technical support, CONSTMACH is the right choice for crushing systems. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: like new (used), functionality: fully functional, machine/vehicle number: A06B-0854-B190, Servo motor Brand: GE Fanuc Model: 6 Motor specification: A06B-0854-B190 Features: Power: 7.5 kW Frequency: 50/60 Hz Rjdpfor Nbkpox Aqueu Current: 44 A Potential energy: 135-222V-AC Revolutions: 1500-8000 RPM

Condition: excellent (used), Auxiliary circuit breaker, circuit breaker, miniature circuit breaker, load break switch, load disconnector, power switch, power disconnector, auxiliary switch, main switch, disconnector, fuse-switch disconnector Rsdpfx Aqoygrw Teuou -Manufacturer: Siemens, fuse switch disconnector 160 A, unused, original packaging -Type: 3NP4085-1CF00 -Number: 2x load break switches available -Price: per piece -Cardboard dimensions: 200/160/H165 mm -Weight: 1.7 kg/piece

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, travel distance X-axis: 4,175 mm, travel distance Y-axis: 1,550 mm, workpiece height (max.): 40 mm, number of spindles: 30, travel speed (max.): 80,000 mm/min, TECHNICAL DETAILS Travel range X-axis: 4,175 mm Travel range Y-axis: 1,550 mm Travel speed X-axis: 80 m/min Travel speed Y-axis: 80 m/min Travel speed Z-axis: 30 m/min Maximum workpiece height: 40 mm Rjdpfoyttcwex Aquju Number of suction traverse beams: 8 Spindles Number of spindles for vertical drilling: 20 Number of spindles for horizontal drilling in X-direction: 10 Total number of spindles: 30 Milling unit Number of controlled axes: 4 + Flex5 Motor power: 15 kW Automatic tool changer Liquid-cooled Saw unit Tool magazine 1 Number of slots: 18 Tool magazine 2 Number of slots: 10 EQUIPMENT NC positioning of suction units Vacuum pump PowerControl P85 control system WoodWop 5.0 machine programming software Note: Cones and milling cutters are not included in the scope of delivery. The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and is responsible for installation, securing, and usage of the machine at the destination. External reference: 7350

Year of construction: 2009, condition: good (used), functionality: fully functional, machine/vehicle number: 0-286-21-0481, BARGSTEDT automatic panel storage system Base area: 26 x 10.5 m Overall height: 3.75 m (to top edge of crane) Stacking height: max. 2.5 m Rodpfx Aqsyv Axnsuou The storage system can be used for flexible feeding of a panel saw, a nesting machine, or as a convenient panel warehouse with automatic retrieval. Storage positions are freely programmable. Important: The control software was updated in 2019 to TLF woodStore, version 7.12.6.0.

Condition: good (used), Tax cards -Replacement cards for: -Homag Type: KFL 53 -Homag Type: KFL 54 -Homag entrance cards -Homag control cards -Homag controller cards -Cabinet: only sold as a complete unit Rjdpfx Aeb A Nf Tequju -Weight: 200 kg

Condition: used, functionality: unexamined, Ferwood Code: RU0010622 - Manufacturer Code: 2-083-01-0276 - Condition: Used - Functionality: Not tested - Compatible Machine: - Weight: 3KG - Dimensions: 36X26X21 cm - If interested, we offer a refurbishment service. Please contact us. Rjdoyrq Alspfx Aquou

Condition: used, functionality: unexamined, Ferwood Code: RU0010621 - Manufacturer Code: 2-083-01-0278 - Condition: Used - Functionality: Not tested - Compatible Machine: - Weight: 3KG - Dimensions: 36X26X21 - If interested, we offer a reconditioning service. Please contact us. Rodpjyrqzujfx Aquou

Condition: excellent (used), Epson G10-854SR Robot Assembly Station and Dispensing Station The assembly station is divided into the following sub-stations: 3.1 Dispensing Area, 3.2 KK+SW Assembly Area, and 3.3 Front Assembly Area. (KK = Heat Sink, SW = End Wall Bracket) St. 3.1: Dispensing Area: - A workpiece carrier (WT) with mounted chassis and PCBs enters the dispensing area via the transfer belt. - It is stopped at the lifting-positioning unit (HuPo), lifted off the belt, and fixed in place. - The X-Y-Z handling moves the dispensing head to the designated position and starts the dispensing process. - After successful dispensing, the handling moves to the rest position, and the WT is placed back on the belt. - Continued transfer to the KK+SW assembly area (provided there is no WT in the mounting position). St. 3.2: KK+SW Assembly Area: - A WT from the dispensing area arrives in the KK+SW assembly area via the transfer belt. - It is stopped at the lifting-positioning unit (HuPo), lifted off the belt, and fixed in place. The chassis side walls of the partially assembled unit are aligned. - KK tray and SW tray positioning occurs simultaneously. - A stack of 12 KK trays and a stack of 12 SW trays are manually placed on their respective infeed conveyors outside the safety enclosure. - The two safety shutters are opened, and the loaded tray stacks move into the gripper position of the respective stacker. - The safety shutters are closed again. - The respective grippers pick up the corresponding tray. - The tray is separated using the Z-axis and transported upward (above the normal pick-up height). Rjdpeibx S Nsfx Aqusu - For centering and stabilization, a centering support is positioned beneath each tray using X-axis handling. - With the stacker's Z-axis, the respective tray is placed on the centering support. - The trays are ready for component pick-up. - With the multi-gripper on the SCARA robot, the KK is picked up from the tray and placed in an intermediate position as an alignment aid (to achieve exact pick-up positions for assembly). - The KK is scanned, picked up again, and if the scanner result is OK, mounted onto the WT. - Any KK that is not OK is placed in a reject box. - The multi-gripper on the SCARA robot then picks up the SW from the tray and places it in the alignment position. - The SW is picked up again and mounted onto the WT. - Assembly continues in the front assembly area. Technical Data: Design: SCARA (4-axis robot) Nominal Load Capacity: 5 kg, Maximum: 10 kg Horizontal Reach: 850 mm Vertical Reach: Axis 3: 420 mm Orientation Range: J4: +/- 360° Repeatability (Horizontal): +/- 0.025 mm Repeatability (Vertical, J3): +/- 0.01 mm Repeatability (Orientation, J4): +/- 0.005° Maximum Working Range: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Maximum Operating Speed: J1, J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400°/s Permissible Inertia: nominal 0.02 kg*m², maximum 0.25 kg*m² User Wiring (electrical): 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-Axis: Outer diameter: 25 mm Press-in Force: 250 N Weight: 48 kg Controller: EPSON RC180 Mounting Type: Ceiling IP Protection Class: IP20 Power and Signal Cables: 3m Financing through our bank is also possible. komplett-konzept.leasingo.de

Condition: good (used), Profile scraper unit, profile scraper, flat scraper unit, finishing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, scraper for edge processing machine -HOMAG finishing unit allows you to smooth the milled edges for optimal appearance of the edge overhang -with scanning of 2 sides each -scraping blade from above and below Rjdpfx Aqjb Sc Stjueu -Quantity: 1 piece available -Dimensions: 500/450/H650 mm -Weight: 60 kg

Condition: used, Unit carrier, clamping plate traversing table, for unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG unit carrier for milling units Rodsb Uhpbspfx Aqueu -with heavy leadership -laterally movable -with counter -Table height: 280 mm -Table surface: 3240 x 295 mm -Table thickness: 20 mm -Price: per piece -Number: 2x available -Dimensions: 3240/295/H280 mm -Weight: 330 kg

Condition: used, Clamping plate, unit carrier, milled surface, welding table, welding table -Clamping surface width: 460 mm -Length of clamping surface: 9090 mm -Table height: 206 mm Redpfeb Uhplsx Aqueu -Working height: 350 mm -Transport dimensions: 9090/490/H350 mm -Weight: 2300 kg

Condition: good (used), Guide cylinders, guide pneumatic cylinders, pneumatic cylinders, compact cylinders -Manufacturer: Festo, guide cylinder type DFM-32-20-PA-GF 170854 -Piston: Ø 32 mm -Stroke: 20 mm -Number: 2 cylinders available -Price: per piece -Dimensions: 101/110/H50 mm -Weight: 1.8 kg/pc. Rjdjxy It Aspfx Aquou

Condition: used, Unit carrier, clamping plate traversing table, for unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG unit carrier for milling units -with heavy leadership -laterally movable -with counter -Table height: 361 mm -Table surface: 1545 x 300 mm -Table thickness: 20 mm -Dimensions: 1545/500/H361 mm -Weight: 222 kg Rjdpfx Aqjb Uhn Souou

Condition: used, Clamping plate, unit carrier, milled surface, welding table, welding table Rsdob Uhpfspfx Aqusu -Width of the table surface: 494 mm -Length of the clamping surface: 2925 mm -Height of table surface: 447 mm -Working height: 447 mm -Transport dimensions: 2925/494/H447 mm -Weight: 564 kg

Condition: good (used), Aggregate carrier, clamping plate, traversing table, for modular aggregate system, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG aggregate carrier for milling units -with heavy leadership Redpfx Ajb R Ua Hequeu -movable laterally -with counter -Table height: 285 mm -Table surface: 1210 x 295 mm -Table thickness: 18 mm -Dimensions: 480/1210/H290 mm -Weight: 172 kg

Condition: used, Proximity switch, proximity sensor -Manufacturer: Festo, proximity switch unused Ovp Redpfx Aqsb A S Hljuju -Type: SME-8-K-LED-24 150 855 -Number: 22x available -Price: per piece -Weight: 0.1 kg/piece

Condition: good (used), CAN axis motor, positioning motor, linear drive, servo motor, electric motor, DC motor, stepper motor, stepper motor -Manufacturer: Homag, CAN axle motor -Type: PSE 411 C -Voltage: 24 V Rjdpfx Aqexx Slgoueu -Power: 30 watts -Speed: 90 rpm -Hollow shaft: Ø 14 x 20 mm -Dimensions: 155/55/H70 mm -Weight: 1.1 kg

Condition: used, Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Manufacturer: Ziehl-Abegg, fan blower radial fan type MK085-4EK.10N Rsdpfeuqq R Sox Aquou -Engine power: 0.16 kW -Speed: 1330 rpm -Volume output: /min -Fan wheel: Ø 315 mm -Connection input: Ø 215 mm -Dimensions: Ø 315 x 180 mm -Weight: 6.7 kg