Used Höcker Polytechnik Vacumobil Vt 200-L for sale (72,184)

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Codpfx Adowc Rk Eohjrh Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CE150 series is an electrically powered high-pressure machine for a pressure range of 200 to 2500 bar and a flow rate of 21 to 300 l/min. The frame consists of hot-dip galvanized sheet metal components and side frames made of stainless steel. Four rubber feet ensure stable positioning. A lifting eye facilitates the transport of the machine. Similar to, but not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Codpohga Scefx Adhjrh 50 Hz - bar - l/min CE150-200-240 CE150-250-200 CE150-1000-50 CE150-1400-33 CE150-2500-21 60 Hz and other models, see data sheet and available upon request. General specifications: ----- Power of the drive motor: 90 kW (50 Hz) / 110 kW (60 Hz) Voltage: 400V (50 Hz) - 440V (60 Hz) Amperage: 160A (50 Hz) - 180A (60 Hz) Dimensions: 2100 mm x 1200 mm x 1400 mm Weight: 2200 kg Includes standard accessories.

Condition: used, twin shaft paddle mixer mixer capacity 1.250 L. 200 mm – head with tool trolley Crsdpfx Aozxdrrodhsh all stainless steel dimensions mixer (l x w x h) : ± 2.350 x 2.000 x 2.600 mm loading height : 2.200mm pneumatic lid

Condition: used, Year of construction: 2007, Attachment: Used chamber filter press, membrane filter press Type: Passavant Year of manufacture: 2007 Application area: Sludge dewatering Filter plate format: 1500x2000 Number of plates: approx. 58 Filter plates: PP Csdezk E S Rspfx Adhsrh Filter cloths: available as an option, tailored to the medium Filter area: approx. 286 m2 Press volume: approx. 4660 dm3 Filter pressure: approx. 15 bar Total weight: 32,900 kg Application: Sludge treatment, dewatering system. Filter presses are batch-operated pressure filters used for the solid-liquid separation of suspensions. Purchase or rental: Rental or purchase. Inspection of the equipment can be arranged at our factory.

Condition: used, Year of construction: 2008, Technical details: turning diameter: 410 mm turning length: 500 mm Codpfx Adozd Un Iohjrh control: Fanuc 21i TB standard turning diameter: 275 mm travel -x axis: 277 mm travel -y axis: 82 (±41) mm travel -z axis: 500 mm Spindle 1 RPM: 4500 1/min Spindle 1 Power: 18,5/18,5/15 kW Spindle 1 max. bar diameter: 65 mm turret stations / rotary tool stations: 12/12 Power rotary tools: 5,5 kW RPM of rotary tools: 6000 1/min total power requirement: 39,2 kVA weight of the machine ca.: 6,2 t dimensions of the machine ca.: 3,1 x 2,0 x 2,2 m collet chuck: Hainbuch Accerories Chip conveyor Robot interface High precision Turning and Milling Centre with Y-axis and robot loading. Stäubli Robot for shaft loading can be supplied. Machine was running with oil, not coolant. A fire extinguisher system is installed *

Condition: used, Year of construction: 2005, operating hours: 81,700 h, clamping force: 45 kN, displacement volume: 69 cm³, injection pressure: 2,400 bar, overall weight: 3,300 kg, screw conveyor diameter: 25 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: % prior to delivery Manufacturer: Engel Type: VICTORY 200/45 Tech + er/usp Condition: aus laufender Produktion Operating hours: ca. 81.700 CLAMPING UNIT: - Clamping force: 45 t Öffnungsweg: 355 mm Mould installation height min.: 175 mm Mould installation height max.: - Tie bar distance (h x v): holmlos Plate dimension (h x v): 550 x 430 mm Centering (fix- movingplate): / mm INJECTION UNIT: IU200 Screw diameter: 25 mm Injection weight in polystyrol: 63 g Stroke volume: 69 cm³ Einspritzdruck: 2.400 bar CONTROL: CC Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 1 Air valves: - Cedpjrbqtnofx Adherh Hot runner control devices: - Robot interface: Angußpicker er/usp Other equipment: Nadelverschl. Hydr., Schnittstelle Dosier- und Temperiergerät GENERAL DATA: - Installed heating capacity: 6,8 kW Pump drive power: 11 kW Total installed power: Motor + Heizung Total weight: 3.300 kg Total size L x B x H: 3,3 x 1,2 x 2,2 m

Condition: used, Year of construction: 2022, Manufacturer: Deighton Model: Econoline 200 Year: 2022 Condition: Used Stock Number: 3405 Deighton forming machine Type: Formatic R2200 / 180 Serial number: R2200/22/10/368 Capacity: max 4400 products per hour Hopper: 20 litres Belt width: 120 mm Codeznk Acjpfx Adhjrh Power: 230VAC, 1Ph, 50Hz, 0.75kW Dimensions: 1150 x 900 x 1500 mm Weight: 95 kg Deighton flattening conveyor Type: FL Serial number: FL 16/04/036 Belt width: 175 mm Power: 230VAC, 1Ph, 50Hz, 0.18kW Dimensions:1450 x 650 x 1200mm Weight: 48 kg Deighton preduster Type: 200W Econodust M/C Serial number: ED 22/09/068 Belt width: 200 mm Power: 3 x 400V, 50Hz, 0.51kW Dimensions: 1600 x 950 x 1400 mm Weight: 140 kg Deighton battering machine Type: 200W weir Econorobe M/C Serial number: WER 22/09/067 Belt width: 200 mm Power: 3 x 400V, 50Hz, 0.88kW Dimensions: 1600 x 950 x 1400 mm Weight: 140 kg Deighton mixer Type: Batter mixer Serial number: M 22/10/073 Mixer: 200 litres Power: 230VAC, 1Ph, 50Hz, 1.5kW Dimensions: 1400 x 600 x 1250 mm With double jacket for cooling Deighton preduster Type: 200W Econodust M/C Serial number: ED 22/09/069 Belt width: 200 mm Power: 3 x 400V, 50Hz, 0.51kW Dimensions: 1600 x 950 x 1400 mm Weight: 140 kg Deighton tempura dipper Type: 200W dip-Econorobe M/C Serial number: ER 22/10/072 Belt width: 200 mm Power: 3 x 400V, 50Hz, 0.4kW Dimensions: 1550 x 750 x 1350 mm Weight: 130 kg Deigthon breading machine Type: 200W Econocrumb M/C Serial number: EC 22/09/070 Belt width: 200 mm Power: 3 x 400V, 50Hz, 1.7kW Dimensions: 1600 x 850 x 1800 mm Weight: 170 kg Deighton fryer Type: Econofry M/C Serial number: EF 22/09/071 Belt width: 200 mm Frying length: 1750 mm Heating: electric Power: 3 x 400V, 50Hz, 23kW Teflon infeed, hold down belt, inline filtration system, storage tank and pump, hoist system

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CE125 series is an electrically powered high-pressure machine for pressures ranging from 200 to 2500 bar and a flow rate of 21 to 240 l/min. The frame is made of hot-dip galvanized sheet metal components and side frames made of stainless steel. Four rubber feet ensure secure positioning. A lifting eye facilitates the transport of the machine. Similar to, but not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz - bar - l/min. CE125-200-240 CE125-1500-35 CE125-2500-21 60 Hz and others, see data sheet and available upon request. General specifications: Credpfxjhga Rxo Adheh ----- Power of the drive motor: 90 kW (50 Hz) / 90 kW (60 Hz) Voltage: 400 V (50 Hz) - 440 V (60 Hz) Amperage: 81 A (50 Hz) - 108 A (60 Hz) Dimensions: 2150 mm x 1385 mm x 1750 mm Weight: 2000 kg Including standard accessories.

Condition: like new (used), KRAMER + GREBE 200 L Industrial Cutter – Stainless Steel KRAMER + GREBE 200-liter industrial cutter, designed for cutting, chopping, mixing, and emulsifying food products in professional production processes. Manufactured by KRAMER + GREBE, a specialized manufacturer of machinery for the meat industry, this cutter features a 200-liter bowl and a high-speed rotary blade system that allows for processing the product to achieve different degrees of chopping, mixing, and homogenization. Its robust stainless-steel construction and industrial capacity make it a particularly suitable piece of equipment for meat processing plants and food product manufacturing. MAIN FEATURES -Manufacturer: KRAMER + GREBE -Type: Industrial cutter / bowl cutter -Bowl capacity: 200 liters -Cutting system using rotary blades -Circular processing bowl -Cutting, chopping, and mixing operations -Suitable for homogenization and emulsification -Construction primarily in stainless steel -Protective cover for the processing area -Integrated control panel -Robust construction for industrial use Csdsx S Ih Tjpfx Adhorh -Designed for batch processing -Hygienic design for the food industry -Easy access for cleaning and maintenance APPLICATION The KRAMER + GREBE 200 L is designed to perform intensive size reduction, mixing, and homogenization operations through the combined action of the rotating bowl and the blade system. The product circulates repeatedly through the cutting area, allowing for different degrees of processing to be achieved depending on the raw material, processing time, and selected parameters. It can be used for operations such as: Cutting and chopping Mixing Homogenization Emulsification Preparation of meat mixtures Preparation of fillings Mixing of ingredients Preparation of formulated products APPLICATIONS Particularly suitable for meat industries, sausage manufacturers, producers of ready meals, pet food, and other food industries that require a robust cutter for batch production. Depending on its configuration, it can be used to produce sausages, pâtés, meat emulsions, fillings, ready meals, and other food formulations. The combination of KRAMER + GREBE, a 200-liter bowl, and industrial construction in stainless steel provides a versatile solution for professional cutting, mixing, and emulsification processes. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 2004, turning diameter: 660 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,045 mm, total height: 2,600 mm, total length: 3,820 mm, total width: 2,060 mm, overall weight: 10,400 kg, Equipment: documentation/manual, CNC Turning Milling centre with Second Spindle CNC Control Mazatrol PC Fusion CNC 640 MT PRO Turning diameter 550/660 mm Turning length 1016 mm Spindle bore diameter 65 mm Spindle speed 35-5000 R/min X-axis movement 580 mm Y-axis movement 160 mm Z-axis movement 1045 mm Csdpfjzv Sfbex Adhorh B-axis travel 225 ° mm C-axis indexing 360° Spindle nose A2-6 Tool Taper Capto C6 Number of tools in magazine 40 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: used, This listing is for the RAININ Pipet-Lite XLS L-300 12 Chanel Pipetter (Button Colour-code White The unit is in full working condition and is ready for immediate use Key Features LiteTouch™ System (LTS) incurs significantly lower tip‑ejection and plunger forces—reducing repetitive strain risk Ergonomic build: smooth plunger springs, “stiction‑less” seals, and a sure‑fit handle for all‑day comfort RFID tagging: each unit stores service/calibration data, aiding lab inventory and GLP compliance Csdpfxjxv Dtqs Adhjrh Fully autoclavable shaft and tip ejector—easy to clean and maintain Performance Specs (20–300 µL range) Increment: 0.2 µL manual adjustment. Accuracy: ±0.8% (~1.6 µL at full volume). Precision: ≤0.3% (~0.6 µL)

Condition: used, Year of construction: 2005, operating hours: 95,000 h, clamping force: 200 kN, displacement volume: 113 cm³, injection pressure: 2,178 bar, overall weight: 11,500 kg, screw conveyor diameter: 30 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Cedpsz A Ialefx Adhsrh

Year of construction: 1979, condition: ready for operation (used), - USED - CONVENTIONAL LATHE CENTRE HEIGHT: 200 mm DISTANCE BETWEEN CENTRES: 1040 mm MAX TURNING DIAMETER OVER BED: 400 mm BAR CAPACITY: 54 mm Codpfx Aey R E Ubjdhjrh SPINDLE: 53 - 2000 rpm; 220 mm TURRET HEAD: 3 POS

Year of construction: 1991, condition: excellent (used), functionality: fully functional, We are offering this very good Haver EML 200 analog unit, manufactured in 1991. It is a complete set, including the machine and (new) sieves. Amplitude range: 0–10 mm Interval range: 0–10 s Timer range: 0–60 min If you have any questions or would like more information, please feel free to send us a message or call us. Includes 2 sieve bottoms and 8 new Retsch sieves: 150, 200, 250, 280, 300, 315, 355, 500 microns Two additional sieves of 500 and 800 microns. Cedpjzuvatjfx Adhjrh Fixed price for the complete set: €1,250

Condition: excellent (used), RETSCH ZM 200 Ultra Centrifugal Mill with DR 100 Feeder Manufacturer: RETSCH GmbH Type: ZM 200 Machine Type: Ultra Centrifugal Mill / Fine Grinding Mill Accessories: RETSCH DR 100 Feeder For sale is a used RETSCH ZM 200 Ultra Centrifugal Mill with RETSCH DR 100 Feeder and extensive accessories. The ZM 200 is designed for the fine grinding of sample material and is offered together with the DR 100 feeder shown in the images, various sieves, rotors, collection and feed components, and other accessories. Technical data: Crsdpfxjzxqhye Adhjh Manufacturer: RETSCH GmbH Model: ZM 200 Device type: Ultra Centrifugal Mill Power supply: 1~ 200–240 V / 50–60 Hz Power according to nameplate: 1,100 W Current consumption: 12 A Operation: digital control and display panel Interfaces: RS232 / RS485 Connection for DR 100 feeder CE marking Feeder: Manufacturer: RETSCH GmbH Type: DR 100 Device type: Feeder / Vibration Feeder Digital control and display panel Start/Stop operation Feed hopper and feed chute as shown in the images Dimensions: ZM 200 (L × W × H): 515 × 410 × 365 mm Equipment: RETSCH DR 100 Feeder Feed hopper Feed chute Rotor / grinding tool as shown in the images Various ring sieves / sieve inserts Collection container Filling and collection components Filter bag Various RETSCH spare parts and accessories Operating manual ZM 200 Operating manual DR 100 Other accessories as shown in the images Transport data: Dimensions ZM 200 (L × W × H): 515 × 410 × 365 mm Weight: not specified / not determined Transport or shipping possible by arrangement Condition: Used Device shown in operational state. Display and control panel shown in active state. Optical condition as shown in the images. Signs of wear and tear are present. Scope of delivery: 1 × RETSCH ZM 200 Ultra Centrifugal Mill 1 × RETSCH DR 100 Feeder Feed hopper and feed chute Rotor / grinding tool as shown in the images Various ring sieves / sieve inserts Collection container and filling components Filter bag Operating manual ZM 200 Operating manual DR 100 Extensive accessories as shown in the images Availability: by arrangement. Scope of delivery as shown in the images. Subject to changes, errors and prior sale.

Condition: used, Year of construction: 2004, Technical details turning diameter 210 mm turning length 700 mm control Okuma OSP-E 100 L total power requirement 35,7 kVA weight of the machine ca. 7,1 t dimensions of the machine ca. 2660 x 2000 x 2330* mm Additional information CNC turning and milling center with C-axis and Y-axis, 2 turrets, and subspindle. The machine is being sold partially overhauled. CNC control: Okuma OSP-E 100 L Maximum turning diameter: 210 mm Swing over bed: 400 mm Distance between spindle noses: 960 mm Main spindle: Spindle bore: 53 mm Speed range: 50 to 6000 rpm Motor power: 11/7.5 kW Subspindle: Spindle nose: JIS A2-6 Cjdpfx Aezzwmusdhjrh Speed range: 38 to 5000 rpm Motor power: 11/7.5 kW Z-axis: Travel: 700 / 700 mm (ZA + ZB) Rapid traverse: 40000 mm/min W-axis: Travel: 940 mm Rapid traverse: 40000 mm/min X-axis: Travel: 167 / 192 mm (XA + XB) Rapid traverse: 30000 mm/min Y-axis: Travel: 92 mm (+50/-42 mm) Rapid traverse: 15000 mm/min C-axis: Indexing: 360 x 0.001 deg. Rapid traverse: 400 rpm Disc turret: 2 x 12 stations Tool holder mount: VDI 30 mm Power of driven tools: 4 kW Total connected load: 35.7 kVA Machine weight: 7100 kg Machine dimensions: 2660 x 2000 x 2330 mm* Plus swarf conveyor and bar loader Accessories FMB Turbo 5-42/6200/A bar loader, year of manufacture 2005 Chip conveyor Coolant system Collet chuck for main and subspindle Both turrets equipped with tool holders Machine documentation.

Condition: used, Year of construction: 2008, The BERTOLI H3075 dairy homogeniser is a piece of equipment used in the dairy industry primarily for homogenizing milk and cream. Here are some key points about it: - Functionality: The homogeniser works by breaking down fat molecules in the milk, ensuring a smooth and uniform mixture. This process helps to prevent cream from separating and enhances the shelf life and quality of dairy products. - Applications: It's typically used in the production of a variety of dairy products such as milk, yogurt, ice cream, and cheese. - Specifications: Although specific technical specifications can vary, common features might include: - Capacity: Often measured in liters per hour, indicating the amount of milk it can process. - Pressure Ratings: The operating pressure used during the homogenization process. - Material: Typically made from stainless steel for hygiene and durability. - Efficiency: The H3075 model is known for its efficiency in energy consumption relative to its output and performance. - Maintenance: Regular maintenance is required to ensure optimal performance, including cleaning the unit and checking parts for wear. Capacity: 10,000 Litres per hour Crsdpfjx Aa Spox Adheh Pressure: 200 Bar Stages: 2 Electrical Requirements: 380/50 Hz Max KW : 75 Amps Requirements: 137 A Condition: Very Well Maintained Full Service in 2025

Year of construction: 2017, condition: new, Size: 040-200 Impeller diameter: 190 mm Q: 32 m3/h Crsdsh I D Dyepfx Adhoh H: 51,00 m

Condition: excellent (used), For sale: KSB ETABLOC G 40-200/1102 G4 centrifugal pump with an 11 kW electric motor. The pump is used, inspected, and in fully working condition. It was checked before being listed for sale. The visual condition corresponds to the photos – normal signs of use and storage are visible. Credpezvymgsfx Adheh Pump specifications: Manufacturer: KSB – Klein, Schanzlin & Becker AG Type: ETABLOC G 40-200/1102 G4 Flow rate Q: 20–60 m³/h Head H: 57–35 m Rotational speed: 2900 rpm Serial No.: 5-118-547 043/1 Motor specifications: Manufacturer: KSB / Klein, Schanzlin & Becker AG Motor type: ZKA 160 MK2 Power: 11 kW Voltage: 380 V Current: 22 A Frequency: 50 Hz Rotational speed: 2880 rpm cos φ: 0.9 Serial No.: 0-118-886321 Ident-No.: 00533537 Motor No.: 544077 Condition: used – inspected – 100% functional. This is the exact unit shown in the photos that is being sold.

Condition: excellent (used), For sale, a used KSB ETABLOC-G 32-200/752 centrifugal pump equipped with a 7.5 kW electric motor. The pump has been inspected – it is fully functional and ready for operation. Pump data: Manufacturer: KSB Aktiengesellschaft Model: ETABLOC-G 32-200/752 Ident-No.: 48862637 Design: G11 No.: 5-927-123823/1 Flow rate Q: 35 m³/h Head H: 61.5–43 m Pump speed: 2900 rpm Additional designation: Pumpen Distel Type: G32-200/752 No.: 198057/2 Motor data: Manufacturer: KSB Type: QUPS 132S2C-60 Power: 7.5 kW Cedpfx Aszvf Dqjdhorh Power supply: 3-phase Frequency: 50 Hz Voltage: 380–420 / 660–725 V Current: 14.7–14 / 8.5–8.1 A Speed: 2880 rpm cos φ: 0.90 Protection class: IP55 Insulation class: F Used pump, in good technical condition. Normal signs of use and storage are visible. The visual condition is accurately shown in the photos. The pump has been inspected, is fully functional, and ready for further use. The item for sale is exactly the one shown in the photos.

Condition: used, Year of construction: 2010, turning length: 1,495 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, workpiece weight (max.): 300 kg, total height: 2,577 mm, total length: 5,088 mm, total width: 2,450 mm, spindle nose: A2-6, spindle diameter: 660 mm, Equipment: documentation/manual, CNC Control Mazatrol Matrix Turning diameter 660 / 260 mm Turning length 1495 mm Spindle bore diameter 65 mm Spindle nose A2-6 Spindle nose sub spindle A2-6 Turning speed spindle 35 - 5.000 R/min Turning speed sub spindle 35 - 5.500 R/min Milling head speed 15 - 21.500 R/min Movement X-axis 580 mm Movement Y-axis 160 mm Movement Z-axis 1.545 mm B-axis travel 225° C-axis indexing 0,0001 (360) ° Tool taper Capto C6 Cedpfx Adszqt Umshorh Tools in tool magazine 120 Barfeeder Irco-Breuning ILS-MUK If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Year of construction: 1992, condition: used, Modell: KSB KRSF-BLOC 50-200, used Typ: KRSF BLOC 50-200 Centrifugal pump Cjdpfxeiztvas Adhjrh Manufacturer Year: 1992 P-Nr.: 5-L40-757 504/2 Q: 9,70 l/s H: 12m n: 1450 1/min

Condition: used, This listing is for a compact, tabletop BRANSON 200 ultrasonic cleaner. SELLERS NOTICE: If you have a competing quote for the item, we will always try to beat it. Items are ‘sold as seen’. ID: FFTF011 Listing name: BRANSON Ultrasonic Cleaner 200 Ultrasonic Cleaner Codpfoxzicnox Adhorh

Condition: ready for operation (used), Year of construction: 2017, total height: 1,900 mm, overall weight: 1,260 kg, This RAPID DGL 200-E sawing machine was manufactured in 2017. It features a manual swivel range from 45° to 90°, a 500mm saw blade, and pneumatic saw feed. It includes both horizontal and vertical clamping cylinders, enhancing its versatility. Dimensions for the 3700mm cutting length are 5250 x 1420 x 1900 mm, and it weighs 1260kg. A robust choice for diverse cutting needs. Contact us for further details regarding this sawing machine. Additional equipment • Pneumatic saw feed • Clamping device:2 horizontal clamping cylinders 2 vertical clamping cylinders Machine Benefits Qualitative Machine Benefits • The machine ran in two shifts for approximately 3 years and in one shift for the last few years. Technical Machine Benefits Credpfx Adozvu Npehsh • Max blade diameter: 500 mm • Swivel range: manual 45° to 90° • Cutting lengths: 3700 mm Extra Information Drive: 2 x 2.2 kW motors Unit adjustment: Motor-initiated Saw feed: Pneumatic Swivel range: 45-90°, manually adjustable Clamping device: Two horizontal clamping cylinders Control system: Prepared for the attachment of a Rapid control system Fixed center support to support the profiles Saw blades D=500 2x ball screw spindle for unit adjustment Smallest sawing dimension: approx. 310 mm Equipment: DGL-200/R600 ELEKTRONIK with ATV 32 DGL200SE VERT. CLAMP NO. M. AGAINST DGL-200E DGL200TK SHORT T. CONNECTION DGL-200RB Movable roller conveyor, width 215 mm DGL-200E CONNECTION 2.2KW Preparation for FRENIC EXTRACTION CONNECTION Socket connection for extraction up to max. 2.2 kW prepared at the factory DGL200VP - PLANK PACK. FIXED CONTROL PANEL DG1.200 Dimensions Machine Depth 5250 mm

Condition: excellent (used), For sale is an industrial KSB ETABLOC-GN 50-200/1502.21 centrifugal pump, equipped with a 15 kW KSB electric motor. The pump is designed for industrial applications, technological installations, water circulation systems, and other suitable media. Pump technical data: Manufacturer: KSB Aktiengesellschaft Type: ETABLOC-GN 50-200/1502.21 Identification number: 48861841 Flow rate Q: 12–100 m³/h Head H: 55–34.5 m Rotational speed: 2900 rpm Connections: flanged Motor data: Manufacturer: KSB Type: QUPA 160 M2B-6 Power: 15 kW / 50 Hz Voltage: 380–660–420 V Current: 27.8–16.1–25.2 A cos φ: 0.93 Protection class: IP55 Insulation class: F Codpjzvzu Ejfx Adhorh Motor weight: approx. 87 kg Condition: used, with normal signs of use and storage visible in the photos. A complete set consisting of the pump and electric motor is being sold, exactly as shown in the photos.