Used Goldhofer Stz-Vls4-37/80 Tiefbett + Sx 1-25/80 Dolly for sale (91,178)

Condition: ready for operation (used), Bosch SM 25/50-TA servo module 1070077376-107 SN: 002359561, used, good condition, 100% functional, delivery scope as per photos. Ljdox Eqyxspfx Ampjaa

Condition: ready for operation (used), Schunk GFS 25-180 universal swivel finger 355510 + INA HK2516-2RS needle bearing, used, good condition, 100% functional, delivery as per photos. Laedpfx Amox Eucqopea

Condition: new, Schneider Automation TSX A25 KPE 141-1 MMS Ethernet controller, E status and serial no. according to photo, unused in opened original packaging, 100% functional, scope of delivery according to photos Ledpfxsi Ec Hzo Ampeaa

Condition: new, GMN TSE 240 cg - 5000 / 37 grinding spindle SN:384125, unused in opened original packaging, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire separately for packing and shipping costs! Laedpfex Dwqfex Ampsa

Condition: ready for operation (used), Fibro EM 13.0280.8.122.08.0.03 Fibrotor round table SN: 1410410/1 + Rehfuss FG691 flat gear SN:482511, used, normal signs of use, 100% functional, scope of delivery as per photos Lsdpfx Amoi D U Nvopjaa

Condition: ready for operation (used), Heidenhain QSY 190F EcoDyn SN: 25 342 980 C, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this item. Please ask for price separately! Lsdpfju T Uvisx Ampoaa

Condition: new, GMN TSE 240 cg - 5000 / 37 grinding spindle 384126, unused, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Ljdpfx Asi Eaaxompjaa

Condition: used, empty load weight: 18,240 kg, maximum load weight: 45,760 kg, overall weight: 64,000 kg, axle configuration: > 3 axles, first registration: 02/2012, next inspection (TÜV): 01/2024, loading space length: 12,120 mm, loading space width: 2,740 mm, loading space height: 550 mm, tire size: 285/70R19.5, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 4 axles, SAF axles, forced steering, lifting + lowering, ABS (anti-lock braking system), lashing rings. Body: Low-bed trailer with 3 hydraulically steered axles and jeep dolly. Including a jeep dolly with a 10t SAF axle and 295/80R22.5 tires! At the rear: 3 x 12t SAF axles! Extendable to 3.2m width, 8m low bed platform! With radio and cable remote control, automatic self-alignment. A detailed technical description is available and can be sent by request! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors! Lasdpfeyf E E Usx Ampoa

Condition: repair required (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: X29324, clamping force: 2,500 kN, screw diameter: 62 mm, Used Stork IMM 2500-1450 injection molding machine. Lsdpfxswhlk De Ampeaa The machine still needs to be tested and repaired.

Condition: good (used), Technical data: Manufacturer; Interroll Condition: Good ( Used ) Max. load: 50 Kg Lajdpfx Amofd Hapopja Belt speed: 1,0 m/s Lifting time: 0,3s Rated voltage: 24V/48V Drive motor and lifting motor Control: Multi Control 6 pieces in stock Customized solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods, we are your competent partner! We will be happy to provide you with an individual offer or advise you on design or installation issues. Simply let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of specialists. For companies in a wide range of industries, such as: Logistics, pharmaceutical industry, trade or the electronics industry, we have already successfully implemented projects. Together we will work out ways to optimize your process and material flow in a cost-effective and sustainable way. We can even offer you fully automatic sorting technology or supplementary components such as picking racks or containers.

Condition: used, maximum load weight: 18,000 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 12/1991, loading space length: 8,200 mm, loading space width: 2,500 mm, Equipment: ABS, * ABS * BPW axles ----Construction: Low-loader trailer (2200+6000mm), loading height approx. 900mm, sloped rearward, drive-on height approx. 750mm, steel/wooden floor, extendable to 3m, spring-loaded loading ramps, lashing rings. Sale to commercial customers only. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE REGARDING EQUIPMENT AND ACCESSORIES. Our Terms and Conditions form the basis of all purchase contracts, invoices, pro forma invoices, orders, and sales negotiations (see Legal Notice). Laedpfx Amewdb Ttspsa

Condition: used, empty load weight: 9,600 kg, maximum load weight: 38,400 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 10/2012, loading space length: 8,800 mm, loading space width: 2,500 mm, loading space height: 860 mm, color: silver, Year of construction: 2009, gearing type: other, driver cabin: other, Equipment: ABS, * German trailer * 1st hand * Condition, see photos Lasdpfxjwxm Ilo Ampsa * Low-loader Goldhofer, type STN-L3-39/80 * 3-axle low-loader with extra long ramps * Ramps hydraulically operated and laterally adjustable * Loading length 8.80 m x 2.50 m * Loading height 0.85 m * SKF axles * 2 supports * Steerable trailing axle * Leaf/air suspension with lift/lower function * DIN heavy-duty lashing rings * EBS * ABS (Anti-lock Braking System) * Tool box * Twin tires * Permissible total weight up to 48,000 kg * Unladen weight 9,600 kg * Payload 38,400 kg If a new technical inspection (TÜV) is required, we will be happy to provide a quote via our partner workshops. Our offer generally does NOT include new TÜV certification, new DGUV, new SP, or new UVV inspection. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to avoid any misconceptions about their condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. We accept no liability for errors or incorrect information in this offer. The buyer is obligated to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Condition: new, functionality: fully functional, machine/vehicle number: 01.1977823101.0010.15, power: 1.1 kW (1.50 HP), overall weight: 28 kg, protection type (IP code): IP54, Multiple available. Ledpfxsu E Ug Us Ampjaa Agitator is made of stainless steel. Frequency: 50/60 Hz Insulation class: F A: 2,40 r/min: 2900/225 Voltage: 380-500 V This SEW agitator is a powerful and versatile solution for process and process engineering applications. With a robust design, this agitator offers reliable performance that is ideal for mixing, stirring and homogenizing liquids and bulk solids. The motor ensures efficient power transmission, while the integrated mechanics enable precise control of the stirring speed. Thanks to its high flexibility and adaptability, the FHZ37 agitator is ideal for use in various industries, including chemicals, food processing and water treatment.

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, overall weight: 30,000 kg, rotor diameter: 800 mm, rotor length: 1,200 mm, power: 250 kW (339.91 HP), Universal granulator, impact granulator. Drive power: 250 kW, control cabinet with frequency converter (year of manufacture 2019). Lasdew Am Nqepfx Ampoa In 05/2023, the rotor shaft was replaced with an exchange shaft, including new bearings and seals. Rotor length: 1200 mm Rotor diameter: 800 mm Number of knives/rotor: 36 pcs Number of knives/stator: 4 x 6 pcs 2 hydraulically swiveling stators, each with 2 rows of counter knives. Fine adjustment of the knives is performed hydraulically while the machine is running. Function 2: Coarse adjustment of the stators by 180° Hydraulic pusher Bearing temperature monitoring Central lubrication system for rotor bearings Net weight: 29,800 kg Year of manufacture: 2004, overhauled in 2025, all wear parts were renewed. The granulator has been overhauled and workshop tested, and is delivered ready for connection. Testing/demonstration available by appointment upon request.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2960x1500x2000 mm Weight 4000 kg Lajdov A Hkiepfx Ampsa Total power requirement 19,5 kw

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: GSVW-3080-1250-1-F, Cross-flow vacuum dryer with 31.68 m³ capacity Laedewrb Nkepfx Ampea The chamber holds 1 package in width at 1.20 m, 3 packages in height at 0.80 m with 0.10 m thick spacer timbers, with a maximum wood length of 16.0 m plus 0.5 m clearance. The chamber holds a net of approx. 19 m³ of trimmed timber with a wood thickness of 50 mm and a stacking stick thickness of 24 mm. Usable space: width 1.20 m, height 2.70 m, length 12.0 m Technology (see detailed performance description under Documents) - Stainless steel cylinder with 80 mm thick resin-bonded rock wool insulation and a ventilated external aluminum trapezoidal sheet cladding. - A vacuum door with special lock for easy end-side loading with walk-on trolley. - A vacuum water ring pump with a capacity of 5.5 kW evacuates the dryer (to be replaced in April 2025). - For air flow through the stacks, 12 fans with 1.5 kW rated power each in delta configuration. The average power consumption in vacuum is only about 0.5 kW per fan. - Hot water heat exchanger for max. 98 kW at 90°C supply temperature installed - The electrical connection is 47 amperes at 3 x 400 V / 50 Hz. - Excess moisture is condensed out via air heat exchangers. - The chamber climate can be humidified as needed using a hot water heated evaporation basin. - The chamber dries fully automatically. Only the wood type, wood thickness, and desired final moisture need to be entered. - Control MB4000 V including control panel - 10 wood moisture measuring points as well as climate and temperature sensors - Run-out rails must be re-ordered, as these are concreted in. The price is ex works and must be paid net before dismantling the plant. The plant must be dismantled or removed by the buyer. Dismantling is not included in the price.

Condition: used, functionality: fully functional, machine/vehicle number: AJ21460A, We are selling here in quantity 2 stackers from Agfa from the Elantrix series. Laedpfx Amstncgaepea They work perfectly and can be picked up immediately. Our price per piece is 2500,-€ on negotiation basis.

Condition: used, Year of construction: 2015, functionality: fully functional, DrillMatic TA325/P/H/12/2/1/-180° rotating hydraulic/pneumatic index table 400x620 Manufacturer: DrillMatic Lodoukg Sropfx Ampeaa Type: TA325/P/H/12/2/1/-180° Air connection: 4 ports. Index values: 3 4 6 8 12 Year of manufacture: 2015 Weight: 66 kg Table size: 400x620mm

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036936, clamping force: 800 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 1,837 bar, injection weight: 123 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,820 mm, overall weight: 5,900 kg, heating capacity: 8.9 kW (12.10 HP), drive type: Vollelektrisch, clear span: 470 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: Laedpsuggb Defx Ampja KM 80 / 250 PA G01 (order 38670013) (machine no.: 61036936, new, year of manufacture 2023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 35 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1837  Stroke volume cm³ 135  Shot weight at max. stroke for PS g 123  Injection speed mm/s 200  Injection flow rate cm³/s 192  Screw drive/speed 1/min 382  Plasticizing flow (standard screw)4) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heat output kW 8.9  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.9  Length x width x height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Electrical preparation for hydraulic auxiliary unit  Euromap interfaces handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package  Swivel device Injection unit The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: used, Year of construction: 2001, Amada HFE 80-25 SL Hydraulic Press Brake. S/No. VO11137 (2001), Remanufactured JTES 2018 Lsdoy D Rhyepfx Ampeaa Location: These lots are located in Yeovil, UK. Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, pressing force: 80 t, control type: CNC control, Equipment: safety light barrier, 1 Used Very Clean Amada 8025 cnc down stroke hydraulic pressbrake for sale Lsdeyzy D Eopfx Ampjaa The Amada HFT 8025 is a CNC hydraulic down-stroking press brake designed for precise sheet metal bending with an 80-ton pressing capacity. It is often equipped with the CD 2000 CNC control system, providing 4-axis control (typically Y1, Y2, X, and R) for high accuracy in industrial applications. Key Technical Specifications Year 2010 Feature Standard HFT 8025 Press Force 80 Tons (800 kN) Bending Length 2,500 mm Stroke Length 200 mm Open Height 470 mm Throat Depth 420 mm Motor Power 7.5 kW

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Hydraulic press brake LVD PPEB-EQ 80/25 CADMAN CNC Year of manufacture: 2006 Serial number: 30734 Technical specifications Ljdpfxjy Avnpj Ampeaa Pressing force: 800 kN Working length: 2,500 mm Distance between uprights: 2,050 mm Stroke: 200 mm Distance table – ram: 400 mm Gap: 400 mm Table width: 150 mm Approach speed: 130 mm/s Working speed: 11 mm/s Return speed: 115 mm/s Weight: 6,200 kg Motor: 7.5 kW Control CADMAN CNC, 6 axes • Back gauge X-mono-R-Z1-Z2 • LVD style upper tool

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Lajdsiyyndepfx Ampea Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Lajdoiyynwspfx Ampsa Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Condition: used, Year of construction: 2001, pressure 70 -800 kN chamfer lenght 2505 mm distance between columns 2125 mm Control OP 2000 controlled axis 7 throat 420 mm stroke 200 mm dayligth 470 mm table width 60 mm table height 960 mm ajustment speed 100 mm/sec working feed 10 mm/sec return speed 100 mm/sec weight of the machine ca. 6,3 t Patented Amada technology ensures absolutely correct bending results without Lajdpfx Ameyz Dgwspsa bombing device