Used Geminis Ge 650 for sale (11,679)

Condition: new, maximum load weight: 56,570 kg, overall weight: 66,500 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle stock, with vehicles available for immediate and short-term delivery, on our website. Extract from the equipment list. Full specification available on request. Chassis: * Chassis frame construction with welded longitudinal beams and through-running cross members * Rear underrun bar approximately 700 mm wide * Fifth wheel plate at least 8 mm thick, fitted between the longitudinal beams * Maximum cross member spacing 400 mm (for longitudinal floor installation) * 3.5-inch kingpin according to SAE standard, replaceable * Outer frame as UNP 200, open to the outside Landing Gears: * 24 t JOST - MODUL CH (Heavy Duty) telescopic landing gear with S-foot Axles: * 4 x 10 t SAF axles with large drum brakes * 22.5 single tires * Axle spacing approx. 1,700/1,810/1,810 mm * Air suspension unit with 10 t load capacity each, lift and lower device with 1 rotary valve Knorr/Wabco * Holder for lift and lower device, bolted design Braking system: * Smartboard/TIM/Infocenter at the lift/lower holder, additionally to the lift/lower valve, without battery (operable only with towing unit) * Mount for light and brake at the front underrun bar, total height approx. 700 mm * Basic version tire pressure monitoring, connected to CAN bus system of the EBS * With double-release valve for brake and spring brake actuator * Test port for brake cylinder pressure on the front right brake cylinder * 1 red and 1 yellow coupling head each * Lift and lower device mounted at rear left in driving direction * EBS braking system by Wabco, EBS diagnostic via CAN bus (EBS plug), no external diagnostic cable! Tyres: * 8 x 445/65 R 22.5 – premium brand of our choice * Centering rings Lubrication: * Grease nipple strips at the bogies and front steering, no central lubrication Bsdjwx Dctjpfx Akajdb Superstructure: * Without body certificate according to DIN EN 12642 XL * 2x LED work lights on top of front wall (facing rear), switch at lift/lower holder * Front wall for platform design, heavy duty * Side outline marking yellow, rear yellow * Front wall approx. 800 mm high, with metal cladding, bolted Lighting: * 2x LED work lights fitted in lamp panel, controlled by reverse gear * 2x LED work lights, controlled by reverse gear, one each side near the landing gear * 2x LED reversing lights, one each side in front of first axle * Lighting/wiring system, brand of our choice * Number plate illumination * The towing vehicle must supply sufficient power for the selected lighting (especially reverse light) * Position lights front, bottom, white, one each side (LED) * 24 volt lighting system with large multifunction light * Flashing side marker lights (LED) * 1x 15-pin and 2x 7-pin connections at the front via multifunction box * EBS socket * 1 pair of lane marker lights (LED) Floor: * Hardwood floor approx. 28 mm thick, alternately with galvanized omega steel profiles Paint/Coating (no metallic finishes): * Chassis painted in RAL color of your choice, front wall (steel construction) in RAL color of choice * Axle hubs in chassis color * Axles and landing gear black * Wheels in aluminum/silver similar to RAL 9006 * Wheel nuts untreated * Underrun protection painted RAL 9010 pure white (aluminum) Accessories: * Lifting device for 1st axle * 9 lashing plates welded into the outer frame per side, lashing capacity max. 3,000 daN * 12 RUD-SLP lashing points per side with

Condition: excellent (used), mileage: 200,000 km, first registration: 11/2020, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 6,300 mm, loading space width: 2,550 mm, Year of construction: 2019, operating hours: 6,523 h, Equipment: crane, electric window regulation, power mirror, trailer coupling, = Additional options and accessories = - Power brake booster - Low noise - Rotating beacon - Sun visor - Toolbox - Xenon lighting - Power take-off (PTO) - Towing hitch Bdjdjxwlr Dspfx Akaob = Additional information = Axle configuration Front axle 1: Steered Front axle 2: Steered Rear axle 1: Suspension: Air suspension Rear axle 2: Lift axle; Suspension: Air suspension Weights Unladen weight: 23,686 kg Payload: 12,314 kg Gross vehicle weight: 36,000 kg Functional Body manufacturer: Palfinger PK 65002-SH F + JIB PJ 125 E CE marking: yes Condition Technical condition: very good Visual condition: very good Financial information Price: On request

Condition: excellent (used), Year of construction: 2015, CNC Lathe with c-axis GEMINIS - GHT4-G4 MACH-ID 9182 Make: GEMINIS Type: GHT4-G4 Control: FAGOR 8055 TC Year: 2015 Full C-Axis 360.000 Driven tools Axiaal & Radial  Driven tailstock  Steady rest C-Type Front chuck with 180 bore Rear chuck with 180 bore 3 guide way bed width 750 mm Max. turning Ø: 800mm X-Axis: 450mm Z-Axis: 4200mm Spindle bore: 162mm Speedrange: 900Rpm ATC / revolver: 8 Speed live tools:3000Rpm Bsdpfx Aewzh Eqokasdb Power live tools:7.5kW Pinole taper: 5Mk Stroke pinole: 250mm Workpiece load: 2500 Length: 8200mm Width: 3200mm Height: 2900mm Weight: 24000kg

Condition: excellent (used), mileage: 465,000 km, power: 488 kW (663.49 HP), first registration: 01/2016, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 6,300 mm, Year of construction: 2016, operating hours: 5,065 h, Equipment: ABS, air conditioning, central locking, crane, cruise control, electric window regulation, navigation system, parking heater, power mirror, trailer coupling, = Additional Options and Equipment = - Aluminum fuel tank - Brake booster - Low-noise - Speed limiter - Refrigerator - Air suspension - Radio/CD player - Reversing camera - Sun visor flap - Auxiliary heating (parking heater) - Toolbox - Xenon lighting Bdjdswdh Tgopfx Akajb - Power take-off (PTO) - Central lubrication - Towing hitch = Further Information = Axle Configuration Front axle 1: Steering Front axle 2: Suspension: Air suspension Rear axle 1: Suspension: Air suspension Rear axle 2: Lift axle; Steering; Suspension: Air suspension Weights Unladen weight: 18,705 kg Payload: 17,295 kg Gross vehicle weight: 36,000 kg Functionality Crane: Palfinger PK 42002-SH E + JIB PJ 080 C, year of manufacture: 2015, mounted behind the cab Body manufacturer: Palfinger PK 42002-SH E + JIB PJ 080 C CE marking: yes Condition Technical condition: very good Visual condition: very good Financial Information Price: On request

Condition: ready for operation (used), Stöber K102AG0060 gearbox SN: YFB526726501004, used, in good condition, 100% fully functional, delivery as per photos. Bsdpfxex Dwcus Akaodb

Condition: new, SEW Eurodrive R57 DRE80M4/TF / 01.1873756507.0003.13 gear motor SN: 01.1873756507.003.13, unused, 100% functional, scope of delivery as per photos. Bdsdpfx Akerhr S Deaob

Condition: ready for operation (used), KUKA 1FK6081-6AF71-1ZZ9-Z S47 servo motor SN:YFS350297765001, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this article. Please ask for price separately! Bjdpfx Aorbw Umjkaodb

Condition: good (used), Year of construction: 2006, Brand: GEMINIS Model: GHT4 G2 700x 2000 Cnc: FANUC 21 TB Distance between centers: 2000 mm Ø Swing over bed : 720 mm Bdjdpfx Asxdub Iskajb Ø Over carriage: 470 mm Spindle diameter : 104 mm Maximum piece weight between points : 2.560 kg Spindle nose: DIN 55027-11 Spindle speed: 0-1600 m/min Total power : 28 kw

Condition: excellent (used), Year of construction: 2007, Manufacturer: GEMINIS Model: GHT5 G2 1000 x 3000 Cnc : SIEMENS 810 D Year : 2007 Distance between points : 3000 mm Max. Swing over bed : 1000 mm Max. Swing over saddle : 680 mm Main shaft hole diameter : 104 mm Turning speed : 1400 rpm Main motor : 37,5 kw Cross slide travel : 8m/min Tailstock quill diameter : 140 mm Quill traverse : 300 mm Bed width : 550 mm Bdedpfx Ajwgmz Uskasb

Condition: excellent (used), mileage: 340,634 km, first registration: 10/2014, fuel type: diesel, axle configuration: 8x6, wheelbase: 3,900 mm, fuel: diesel, fuel tank capacity: 500 l, brakes: engine braking, color: orange, driver cabin: sleeper cab, gearing type: automatic, Year of construction: 2014, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, fridge, navigation system, parking heater, power mirror, soot filter, spoiler, = Additional Options and Accessories = - Aluminum fuel tank - Brake booster - Low noise - Speed limiter - Air suspension - Air horn - Particulate filter - Reversing camera - Sleeper cab - Sun visor - Stability control - Auxiliary heater - Toolbox - PTO (Power Take-Off) = Further Information = Technical Information Number of cylinders: 6 Unladen weight: 21,600 kg Transmission Transmission: I-SHIFT, automatic Axle configuration Front axle: Steered Rear axle 1: Steered Rear axle 2: Twin tires Rear axle 3: Twin tires Condition Technical condition: very good Visual condition: very good Financial Information Price: On request VOLVO FMX 500 8X6 + PALFINGER PK 65002-SH F POWER LINK PLUS CRANE + JIB PJ 125 E L PACKAGE 500 HP DRIVE 8X6 WHEELBASE 390 CM AIR SUSPENSION I-SHIFT AUTOMATIC TRANSMISSION FMX SLEEPER CAB WITH AIR CONDITIONING, NAVIGATION, FRIDGE, CAMERA ADJUSTABLE FIFTH WHEEL MULTIPLE TOOLBOXES PALFINGER PK 65002-SH F POWER LINK PLUS CRANE + JIB PJ 125 E TOTAL 13X HYDRAULIC EXTENSIONS OIL COOLER FOR CRANE HYDRAULICS 4X OUTRIGGERS RADIO REMOTE CONTROL MAX LIFTING CAPACITY 19,100 KG MAX LIFTING CAPACITY AT 3,050 CM: 470 KG MAX WORKING HEIGHT 34.8 METERS Bjdpfx Aeuxul Dokajdb PALFINGER PJ125 E JIB MFG YEAR 2014 ONLY USED 1 MONTH!! 6X HYDRAULIC EXTENSIONS + 2X MANUAL THIS JIB IS AS GOOD AS NEW! FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPANOL WE SPEAK ENGLISH

Condition: used, functionality: fully functional, In this offer you are purchasing a mint condition resting ECG "GE CAM Connect 14" Bedpfx Akewr Anbeaodb Object of sale: 1 x GE CAM Connect 14 with the following features: Mobile resting ECG 12 or 15 leads Easy to integrate into MUSE and PACS systems With automatic arrhythmia detection DICOM-compatible Condition: This is a used device which may show signs of use (minor scratches or yellowing). The device has been tested for function Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: used, Year of construction: 2019, - Brand: Omme Lift - Type: 1650 EB - Year of construction: 2019 - Hours: 682 - Weight: 1975 kg. - Working height: 16.5 meters - Lateral reach: 10.5 meters - Dutch license plate - 25-WT-SB - Drive: Battery + 220 volts - Movers / wheel drive Bjdpfx Akoxrv E Roasdb - Safety inspection until Aerial work platform book available - CE document available - Machine is very neat - From 1st owner - Video on our website - Trade-in and transport possible * Brand: Omme Lift *Type: 1650 EB * Construction year: 2019 * Hours: 682 * Weight: 1975 kg. * Working height: 16.5 meters * Lateral reach: 10.5 meters * Drive: Battery + 220 volts

Condition: new, maximum load weight: 39,850 kg, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the specifications. Full equipment details available upon request. Chassis: - Welded construction from high-quality steel sections with through-profile cross members - Designed for high point loads. Outer frame as UNP profile - Fifth wheel plate approx. 8 mm, underride guard nose approx. 700 mm wide - Bracket at front for customer-side mounting of a support device, approx. 90 x 90 x 4 mm Coupling device: - 2-inch kingpin (mount also suitable for 3.5) Rear underrun protection: - According to EC, bolted design Side underrun protection: - According to EC Landing gear: - 24 t landing legs with single-side operation (test load approx. 66 t), Jost Modul CH (Heavy Duty) S-foot Axles: - 3 x 9 t air suspension axle units, manufacturer of our choice, with disc brake approx. 430 x 45 mm - ABS - Hub-centric wheel mounting, 10-hole, ET 120 - Total air suspension travel approx. 200 mm, of which raising approx. 140 mm and lowering approx. 60 mm, controlled via rotary slide valve with detent, with RTR function - Switch for second ride height (+ approx. 50 mm) on the bracket of the lifting and lowering device - Smartboard/TIM/Infocenter, without TPMS display Lifting axle: - First axle liftable, with fully automatic load-dependent lift control, starting aid via button in the driver’s cab (15-pin socket PIN12). Button in cab not included in delivery Braking system: Manufacturer of our choice - Two-line compressed-air braking system according to EC with EBS and RSS, automatic load-dependent adjustment - Spring brake cylinder as parking brake - Mistake-proof coupling heads mounted securely on front cross member, without connecting line to the motor vehicle Tyres: - 6 units, 385/65 R22.5 160J on 11.75 x 22.5 rims (manufacturer of our choice), ET 120 - Basic version tyre pressure monitoring, connected to EBS CAN-bus system Bdodpfx Akjwx Dbpoajb - Tyre pressure display in driver’s cab (pre-installed by truck manufacturer) Mudguards: - According to EC, PVC mudguards (half-shells) over all axles - Anti-spray mudflaps Load securing: - 8 pairs of lashing plates welded into the outer frame (pulling force approx. 3 t) - 6 pairs of lashing rings on the side of the outer frame, evenly distributed (pulling force approx. 10 t) - 13 pairs of lashing eyes (bails) on the outer frame (tested lashing capacity approx. 2.5 t per point) Stake pockets/stakes: - 5 pairs of stake pockets recessed in the outer frame, approx. 90 x 90 x 4 mm - 3 pairs of stake pockets recessed in the loading floor, approx. 90 x 90 x 4 mm - 10 plug-in stakes made of galvanized box section, approx. 80 x 80 x 4 mm, with stop at the bottom Front wall: - Bolted front wall, approx. 1,200 mm high, covered with approx. 5.5 m sheet metal Stake magazine: - Inside the front wall, a magazine for plug-in stakes Floor: - Approx. 28 mm hardwood floor recessed in the outer frame, with galvanized omega steel profiles Lighting system: - According to EC, 24 volts with multi-chamber taillights - LED side marker lights - LED front position lights white - LED rear outline marker lights - Number plate lights - 1x 15-pin and 2x 7-pin socket connectors on the front cross member Equipment: - Chock with double holder - Warning sign according to ECE 70 - 2 LED work lights on the lamp bracket (switched by reverse gear) - Bracket for optional rotating beacon at rear (incl. beacon) - 1 foldable and extend

Condition: new, overall weight: 43,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete range of vehicles, including immediately and soon available units, on our website. Equipment excerpt; full equipment details available on request. Chassis: * Welded construction made from high-quality steel profiles with through cross beams, designed for high point loads * Underrun bar width approx. 700 mm * Outer frame as UNP profile * Fifth wheel plate approx. 8mm * Neck height at front approx. 130 mm Coupling device * 2-inch kingpin Rear underrun protection * Bolted version, in compliance with EC regulations Side underrun protection * According to EC regulations, made of anodised aluminium profiles Landing legs * 2 x 12 t landing legs with compensating foot and single-side operation, RHS in direction of travel Axles * 3 x 9 t air suspension axle assemblies, disc brakes 22.5” * Total stroke approx. 180 mm * Lifting and lowering device via rotary slide valve Braking system * Twin-line compressed air braking system to EC specifications, with EBS and RSS, automatic load-dependent control * Spring chamber cylinders as parking brake * Polarity-protected coupling heads permanently mounted on front cross member, without connecting line to towing vehicle Tyres * 6 off, 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120, brand of our choice * Tyre pressure monitoring system (TPMS) via EBS CAN bus Bdjdpfx Ajw U H Sbekajb Mudguards * According to EC regulations Spare wheel holder not included Load securing * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 5.0 t * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 2.0 t * Drill holes for attaching lashing straps every approx. 400–600 mm in the outer frame Front wall * Reinforced fixed steel structure, approx. 1,400 mm high * Inner face lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z-hardwood floor let into the outer frame with galvanised omega steel profiles Lighting system * In compliance with EC, 24 volt, with multi-chamber lights * LED side marker lights * Front white LED position lights * Rear LED outline marker lights * Number plate lights * LED lane departure lights * 1x15- and 2x7-pin plug connections at the front cross member Equipment * 2 wheel chocks with holders * ECE 70 warning boards * Bracket for rotating beacon, incl. rotating beacon * 2 rubber buffers at the rear * Foldable and extendable access ladder at rear right (without platform) * 1 open perforated sheet metal box, transverse to direction of travel, approx. 600 x 450 x 2,430 mm, galvanised, behind the axles Paintwork * Front wall: RAL single colour as requested * Chassis: hot dip galvanised * Outer frame: hot dip galvanised + single RAL colour as requested * Centre stanchions: single RAL colour as requested * SSV: aluminium, anodised * Rear underrun protection: white (RAL 9016 traffic white) * Attachments: galvanised / KTL black * Rims: silver Conspicuity markings * Complete set in yellow Including special equipment * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stanchion pockets in the outer frame, evenly distributed * 4 rows of stanchion pockets across the loading area * 20 stanchions made of galvanised tube 80/50, total length approx. 1,200 mm * Magazine for 20 removable stanchions inside the front wall * 5 x 25 side walls and rear wall made of anodised aluminium hollow profiles, foldable and removable * Removable Kinnegrip stanchions * Side wall and stanchi

Condition: new, maximum load weight: 34,350 kg, overall weight: 42,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our entire vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment. Full equipment details available on request. Chassis: * Welded construction made of high-quality steel profiles with through cross members, designed for high floor or point loads, equipped with a heavy-duty outer frame * Loading platform at the rear as a welded steel construction, with two welded-in outer driving rails made of 5-hole steel plate (Lohr/Rolfo hole pattern system) approx. 2,250 mm in length, hydraulically lowerable by approx. 350 mm * Rear section includes a hydraulically extendable loading table (approx. 1,500 mm), constructed from welded steel with 5-hole steel plate (Lohr/Rolfo hole pattern system) cover, lighting brackets, and two ramp compartments and ramp supports * Drive and control of the rear operated via electric-hydraulic power unit housed in a stainless-steel box mounted on the left of the chassis, with radio remote control * Power supplied by the towing vehicle’s battery (NATO socket on the front wall, without connecting cable to the truck) Towing Device: * 2" king pin, replaceable from below Underrun Protection: * Fixed as per EU standard Landing Legs: * 2 x 12 t support winches with 2-speed gearbox Axles: * 3 x 9 t air suspension axle assemblies * Brand: SAF, disc brakes approx. 370 x 45 mm * ABS * 10-hole hub-centric wheels, offset ET120 * Total air suspension travel approx. 310 mm (lifting approx. 220 mm, lowering approx. 90 mm) * Air suspension controlled via hand lever with stop function Lift Axle: * 1st and 3rd axles automatically liftable, can also be actuated from the chassis frame or via PIN 12 of the lighting socket Tires: * 6 units, 445/45R19.5, fitted on 14.00X19.5 rims, 10-hole ET120 Mudguards: * As per EU regulations, 1/4 PVC mudguards * 1st axle front and rear, 2nd and 3rd axle rear Brake System: * Brand: Wabco * Dual-line brake system as per EU with EBS, automatically load-dependent control * Spring-operated parking brake acting on 2 axles * Interchange-proof coupling heads fixed to the front cross member, no connection to towing vehicle Lighting System: * As per EU regulations, 24V, * Multi-chamber rear lights, * License plate lights * LED side marker lights * LED front position light (white) and rear track lights * 15-pin socket and 2x7-pin sockets fixed at the front cross member, no cables to towing vehicle Load Securing: * 9 pairs of foldable lashing rings evenly distributed, approx. 8 t pulling force * 8 pairs of foldable lashing rings evenly distributed, approx. 2.5 t pulling force * 2 pairs of foldable lashing rings at the rear, approx. 2.5 t pulling force * External frame with holes approx. every 500 mm for tie-down straps Stake Pockets: * 16 plug-in stakes approx. 100/40 mm, usable length approx. 800 mm Bdsdewt Iylspfx Akaeb Stake Pockets: * 8 per side integrated into the outer frame * 4 rows of stake pockets transverse to the loading area Floor: * Approx. 28 mm Z-grade hardwood floor recessed into the outer frame Front Wall: * Solid front wall * Depot for 16 plug-in stakes approx. 100/40 * Front wall bolted to the top frame Equipment: * 2 wheel chocks with holders * 2x PVC toolboxes, approx. 600/400/500 mm * Holder for beacon light at rear incl. lamp * 2 LED reversing lights (rear) * 2 aluminum loading ramps, dimensions approx. 1,550 x 400 mm, load capacity approx. 4,000 kg/pair * Wheel load

Condition: used, maximum load weight: 32,610 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2023, next inspection (TÜV): 11/2025, total width: 2,550 mm, Equipment: ABS, You can find our complete selection of vehicles with immediately and short-term available units on our website. Sample from the equipment list. Full equipment details available upon request. Bdsdpfx Aswyhy Eokaob Chassis: * Welded construction made from high-quality steel profiles with through-profile cross members, designed for high point loads. Coupling Device: * 2-inch king pin Underrun Protection: * Bolted version, compliant with EC regulations Side Impact Protection: * EC compliant Landing Legs: * 2 x 12 t landing legs with compensating foot and one-sided operation on the right hand side (FR) Axles: * 3 x 9 t air suspension axle assemblies * Disc brakes * Brand: Gigant Brake System: * Dual-line compressed air brake system compliant with EC regulations, equipped with EBS and RSS, automatic load-dependent control * Spring brake cylinders as parking brake * Foolproof coupling heads permanently mounted on front crossmember, without connection line to tractor unit * Brand: Wabco Tyres: * 6 off, 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120 Mudguards: * EC compliant, PVC mudguards in front of and behind the axle assembly Spare Wheel Carrier: * 1 piece double basket with mounting hardware for one spare wheel with ET 120 Load Securing: * 9 pairs of foldable lashing rings, evenly distributed, tensile force approx. 8.0 t * 8 pairs of foldable lashing rings, evenly distributed, tensile force approx. 2.5 t * Drill holes for tie-down straps approximately every 500 mm on the outer frame Front Wall: * Reinforced steel construction, fixed * Interior lined with approx. 9 mm phenolic plywood floor (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor set in outer frame Lighting System: * EC compliant, 24 Volt, with multi-chamber lamps * LED side marker lights * LED front position lights (white) * LED rear outline marker lights * Number plate lights * 1x 15-pin and 2x 7-pin plug connectors on front crossmember Paintwork: * Chassis and front wall sand-blasted, primed and painted in single color * Chassis: RAL 3002 carmine red * SSV: aluminium anodized * Underrun protection: white RAL 9010 * Attachments: galvanized/KTL black * Wheels: silver Including Special Accessories: * First axle liftable with fully automatic, load-dependent lift control * 10 pairs of stake pockets in outer frame, evenly distributed * 4 rows of stake pockets crosswise to loading area * 20 stakes made of galvanized pipe 80/50, total length approx. 1,000 mm * Storage magazine for 20 plug-in stakes on inner front wall * Twistlocks for 1 x 40’ and 2 x 20’ containers, flush-mounted at the rear * Twistlocks for 1 x 20’ container in middle position * Work light on lamp bracket (switched via reverse gear) * 2 PVC toolboxes, approx. 660 x 400 x 500 mm

Condition: new, overall weight: 43,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment. Full equipment details on request. Bdjdeugqvfjpfx Akaob Chassis: * Welded construction made of high-quality steel profiles with punched profile cross members, designed for high point loads * Underrun bar width approx. 700 mm * Outer frame as UNP profile * Wear plate approx. 8 mm * Neck height at the front approx. 130 mm Towing Device * 2” kingpin Underrun Protection * Bolted version, compliant with EU regulations Side Guard Protection * EU-compliant, made of anodized aluminium profiles Landing Legs * 2 x 12 t landing legs with compensating foot and single-side operation on the right (FR) Axles * 3 x 9 t air-suspension axles * 22.5" disc brakes * Total lift approx. 180 mm * Lift and lowering mechanism operated via rotary slide valve Braking System * Dual-line pneumatic braking system (EU compliant) with EBS and RSS, automatic load-dependent control * Spring-loaded cylinders as parking brake * Anti-swapping coupling heads firmly mounted on the front cross member, no connection line to the tractor Tyres * 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 ET 120 * Make of our choice * Tyre pressure monitoring system (TPMS) via EBS CAN-bus system Mudguards * EU-compliant Spare Wheel Carrier * None Load Securing * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 5.0 t * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.0 t * Approx. every 400–600 mm in the external frame, holes for attaching tension straps Front Wall * Reinforced steel construction, fixed, approx. 1,400 mm high * Interior panelled with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z hardwood floor, recessed in the outer frame with galvanized omega steel profiles Lighting System * EU-compliant, 24 volts, with multi-chamber lights * LED side marker lights * LED position lights white at the front * LED outline marker lights at the rear * Number plate lights * Lane marker lights LED * 1 x 15-pin and 2 x 7-pin connectors at the front cross member Equipment * 2 wheel chocks with holder * ECE 70 warning plates * Beacon mounting bracket incl. rotating beacon * 2 rubber buffers at the rear * Folding and extendable rear access ladder on the right (without platform) * 1 open perforated sheet box, crosswise to direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, behind the axles Paintwork * Front wall: RAL colour of your choice * Chassis: hot-dip galvanized * Outer frame: hot-dip galvanized + RAL colour of your choice * Side underrun protection: aluminium, anodized; underrun guard: white (RAL 9016 traffic white) * Add-on parts: galvanized / black KTL coated * Rims: silver * Contour marking: complete yellow Including special equipment * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stake pockets in the outer frame, evenly distributed * 4 rows of stake pockets crosswise to the loading area * 20 stakes made of galvanized 80/50 tube, total length approx. 1,200 mm * Magazine for 20 plug-in stakes inside the front wall * Container locks for 1 x 40' and 2 x 20' containers, rear flush * Container lock for 1 x 20' container in the center * Working headlight at the lamp support (switched via reverse gear) * 2 stainless steel toolboxes, approx. 600 x 500 x 500 mm, one each on left and right

Condition: used, mileage: 233,400 km, power: 130 kW (176.75 HP), first registration: 01/2015, fuel type: diesel, empty load weight: 6,050 kg, maximum load weight: 1,440 kg, overall weight: 7,490 kg, axle configuration: 4x2, wheelbase: 4,200 mm, brakes: engine braking, color: silver, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel-air, loading space length: 5,100 mm, loading space height: 500 mm, Equipment: ABS, crane, cruise control, differential lock, low noise, onboard computer, soot filter, Mercedes-Benz Atego 818 flatbed with crane Reg.: 1/ 2015 Only 233,400 KM Euro6 emissions class Short driver's cab Manual transmission Air suspension rear axle Tires 235/75 R17.5 profile approx. 50% on aluminum rims Wheelbase 4200mm Flatbed 5100mm 500mm side walls Total permissible weight 7,490 kg (possible 8,600 kg) Empty weight 6,050 kg Crane Palfinger PK 6501 Operating hours 3418 2 point support Max.:/ 3300 kg 3.70 m/ 1680 kg 5.60 m/ 1120 kg Hook height 8.50 meters German vehicle from 1st hand in a well-maintained condition. New TÜV inspection. Export/net price: 33,900 euros All information without guarantee, errors excepted. Bodpfx Akjv Av Rleaodb

Condition: used, mileage: 233,400 km, power: 130 kW (176.75 HP), first registration: 01/2015, fuel type: diesel, empty load weight: 6,050 kg, maximum load weight: 1,440 kg, overall weight: 7,490 kg, axle configuration: 4x2, wheelbase: 4,200 mm, brakes: engine braking, color: silver, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel-air, loading space length: 5,100 mm, loading space height: 500 mm, Equipment: ABS, crane, cruise control, differential lock, low noise, onboard computer, soot filter, Mercedes-Benz Atego 818 flatbed with crane Reg.: 1/ 2015 Only 233,400 KM Euro6 emissions class Short driver's cab Manual transmission Air suspension rear axle Tires 235/75 R17.5 profile approx. 50% on aluminum rims Wheelbase 4200mm Flatbed 5100mm Bdedpfov Av Rfjx Akaeb 500mm side walls Total permissible weight 7,490 kg (possible 8,600 kg) Empty weight 6,050 kg Crane Palfinger PK 6501 Operating hours 3418 2 point support Max.:/ 3300 kg 3.70 m/ 1680 kg 5.60 m/ 1120 kg Hook height 8.50 meters German vehicle from 1st hand in a well-maintained condition. New TÜV inspection. Export/net price: 33,900 euros All information without guarantee, errors excepted.

Condition: excellent (used), Year of construction: 2022, operating hours: 1,901 h, functionality: fully functional, High-precision Swiss-type CNC lathe in excellent condition. Ideal for small and medium-sized precision parts. Equipped with several options: • Direct-drive rotary guide bushing • High-pressure coolant system • Chip conveyor with cart • Work conveyor Bdjdpfotq Hufjx Akajb • Fanuc chip breaker function • Drill breakage sensor • STG-320 hydraulic magazine-type bar feeder (3m, Ø3–20 mm) Perfect for production of precision components for electronics, automotive, medical and general mechanical industries. For sale due to changed production needs. Year: 2022 Condition: Excellent / Low use

Condition: new, Year of construction: 2026, functionality: fully functional, working range: 6,500 mm, type of input current: three-phase, total width: 1,629 mm, total height: 2,525 mm, total length: 10,500 mm, table length: 6,500 mm, overall weight: 5,500 kg, power: 15 kW (20.39 HP), laser power: 6,000 W, warranty duration: 24 months, Equipment: cooling unit, safety light barrier, PFEIFER technology skyTUBE Pro 6500 X3 – Profile & Tube Laser Center 6500 x 15 – 160 mm Format skytube-pro-6500×3 Profile and Tube Laser Fiber Laser Metal Cutting – fast material change with up to 6kW, delivering effective performance for your production, is the smart and efficient tube laser processing solution. Capable of laser cutting round tubes, square tubes, rectangular tubes, open profiles, and special profiles, this laser machine ensures maximum productivity during production changeovers. Task: Fiber laser up to 6kW for a wide range of metalworking applications! Unrivaled Laser Cutting Performance High axis speeds and accelerations, combined with a robust mechanical structure, ensure outstanding cutting performance and precision. The tube and profile laser processing machine for production offers a compact footprint – simply smart! Ingenious solutions, 100% made in Saxony! Tubes and profiles from 15 x 15 to 160 x 160 mm – 3D cutting with efficient fiber laser technology. The semi-automatic 6-position profile-tube loading chain system allows fast job changes. With the optional bundle loader, you work independently. Bevel Cutting A revolutionary feature. With the ability of our machines to swivel their cutting head up to 50° on an additional fifth axis, we provide the solution to one of the biggest challenges in modern profile processing. If the laser beam always strikes the tube at a right angle, you end up with an elliptical cut edge. With the capability to swivel the tube laser cutting head, together with the feed axis, completely angled cuts are now possible. Of course, when working with the skyTUBE Laser, safety comes first! The skyTUBE Pro is a Class 1 laser system. There is no risk of contact with laser emissions or reflections during operation. For all our laser systems, nothing is more important than complete safety and compliance with the highest standards and directives. Technical Specifications: · Closed industrial housing, Class 1 laser (optionally Class 4) · Working area, tube cutting system/chuck: Round tubes 15–160 mm, rectangular tubes 15 x 15 – 110 mm · Working area on the tube: X 6500 mm, Y ±100 mm, Z 150 mm, A ±360°, U ±50° Bdjdpfx Akorh Iw Tsaeb · Automatic material feed: up to 6 x 160 mm profiles, lengths 3500–7000 mm · Automated material unloading system for profile sections, construction adjusted to profile length · Z drive: ball screw axis system / with PTI SVZ system · X/Y drive: linear axis system / with PTI AC-SERVO system · Productive cutting speed: depending on material and laser combination, up to 50 m/min / 1.4G · Software resolution: up to 2500 DPI · Repeatability: ± 0.03 mm · Max. footprint dimensions (LxWxH): 11,600 mm x 2,830 mm x 2,100 mm + unloading system according to profile section length

Condition: used, Year of construction: 2015, Unladen weight 938kg Transport width 2.65m PTO shaft hydr. displacement / Bdedsucqbaspfx Akasb

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, Equipment: documentation/manual, The used, FULLY REFURBISHED self-learning CNC lathe GEMINIS GHT4 720X3000 is a robust, medium-large parallel bed lathe equipped with FAGOR 8055 CNC, center height 360 mm, distance between centers 3000 mm, spindle bore 106 mm. Bedsxdvbcopfx Akajdb The machine is COMPLETELY REFURBISHED AS NEW, including bed grinding, carriage grinding, Turcite overlays, spindle bearings, axis bearings, axis screws, electrical system, motor overhaul, new drives, new FAGOR keyboard, etc. The equipment is completed with prearrangement for automatic turret, manual self-centering chuck, and 2 steadies.

Condition: used, Year of construction: 2018, operating hours: 650 h, load capacity: 2,500 kg, fuel type: diesel, gearing type: automatic, Equipment: head guard, Very nice rough-terrain truck-mounted forklift with only approx. 650 operating hours * All-wheel drive * All-wheel steering * Kubota engine 18.4 kW * Scissor reach + long forks * Various LED work lights * Rotating beacon * Engine inspection with oil change due 11/2025 * Only approx. 650 operating hours Financing, hire-purchase, or trade-in available on request. ---- Optionally, and at a fair additional cost, we can also offer you a suitable truck: Mercedes-Benz ANTOS 2640 with only approx. 350,000 km total mileage and forklift mounting bracket. See our other listings for more details. Non-binding vehicle offer. We are a master automotive workshop and can provide you with a wide range of repair and conversion services for vans and trucks. Please let us know your requirements, we’ll be happy to assist. Bjdpox Ndlpofx Akajdb For further information, please do not hesitate to contact us.

Condition: used, functionality: fully functional, Year of construction: 2018, total length: 2,400 mm, total height: 2,945 mm, total width: 1,300 mm, type of input current: AC, overall weight: 2,900 kg, input voltage: 400 V, laser power: 3,000 W, One of the best model of the 3D metal printer model on the market. High tech, very accurate and fast, can print stainless and titanium. Made for aerospace manufacturing, but capable for other industries as well. Machine type: 3D printer Manufacturer: GE Additive Model: Arcam EBM Q20plus Bdodpfx Aevmpq Tekaob Year of construction: 2018 Condition: used Functionality: Fully functional Price 59000.- eur, loaded on truck. Best price you ever can buy such level printer. Packed into manufacturer boxes, ready to ship. Data from manufacturer: Max. build size 350 x 380 mm (Ø x H) Max. beam power 3kW Cathode type Single crystalline Min. beam diameter 140 μm Max. EB translation speed 8,000 m/s Active cooling Water-cooled heat sink Minimum chamber pressure 5 x 10-4 mbar Typical build atmosphere 4 x 10-3 mbar (partial pressure of He) He consumption, build process 4 l/h He consumption, ventilation 100-150 l/build Power supply 3 x 400 V, 32 A, 7 kW Size approx. 2,400 x 1,300 x 2,945 mm (W x D x H) Weight 2,900 kg CAD interface Standard: STL Materials: Arcam EBM Ti6Al4V Grade 5, P-Mtrl Arcam EBM Ti6Al4V Grade 23, P-Mtrl