Used Engel Engel Er-Usp 5 for sale (77,063)

Condition: good (used), Year of construction: 2013, Clamping Force: 60 tons (600 kN) Injection Unit Orientation: Vertical Rotary Table: Included Screw Diameter: 25 mm Shot Size: Around 4.4 oz (125 g) Injection Pressure: Up to 210 bar Iijdpfxjwp E Hzo Aatof Injection Speed: Approximately 139 mm/s Mould Opening Stroke: 305 mm Ejector Stroke: 106 mm

Condition: ready for operation (used), Year of construction: 1997, operating hours: 113,881 h, functionality: unexamined, machine/vehicle number: 32833, total length: 6,500 mm, total width: 2,000 mm, total height: 2,200 mm, overall weight: 11,500 kg, For sale is a used machine from a site closure. Sale is made with the exclusion of any warranty for defects. Iisdozl S Rpepfx Aatjf The machine has not been inspected but was in working order until the end.

Condition: excellent (used), Year of construction: 2007, clamping force: 2,000 kN, screw diameter: 55 mm, injection pressure: 2,183 bar, injection weight: 562 g, mold height (min.): 400 mm, ejector stroke: 180 mm, Engel VC 1350/200 Tech Clamping force: 200 tons Year of manufacture: 2007 Weight: 14,200 kg Dimensions (L x W x H): 6.3 x 1.9 x 2.3 m Injection unit: .../1350 Screw diameter: 55 mm Injection volume: 618 cm³ Iisdezt I Srepfx Aatjf Shot weight (for PS): 562 g Specific injection pressure: 2,183 bar Mould clamping system: 200/... Mould platen dimensions: 860 x 570 mm Mould installation height: 400 mm Opening stroke: 750 mm Maximum platen distance: 1,150 mm Ejector stroke: 180 mm Ejector force: 80 kN Equipment: - 2 × hydraulic core on moving platen - Pneumatic valve - 8 hot runner zones - 8-section rotameter

Condition: excellent (used), Here we offer a Leybold Trivac oil-sealed vacuum pump. Leybold Trivac oil-sealed vacuum pump with exhaust filter. Leybold TRIVAC D 25 B oil-sealed vacuum pump. 2.5 x 10⁻³ mbar Pumping speed (50 Hz): 25.7 m³/h Pumping speed (60 Hz): 30.8 m³/h Exhaust filter with oil return ARS 16-25 Type: D 25 B Condition: used Scope of delivery: (See picture) Iiodpfxezdqq Eo Aatef (Subject to changes and errors in the technical data and specifications!) We will gladly answer any further questions you may have over the phone.

Condition: good (used), Trapezoidal thread tap Iisdpfjdx Uy Isx Aatjf Diameter 40 mm Pitch 1/5 inch

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,250 kg, total length: 137,000 mm, load per truss pair (max.): 3,250 kg, number of shelf rows: 10, frame height: 5,000 mm, clear span: 3,300 mm, frame width: 1,100 mm, shelf height: 5,000 mm, shelf length: 137,000 mm, support length: 3,300 mm, 2 single-row pallet racks + 4 double-row pallet racks, each 13.7 m long, 5 m high, 1.1 m deep. Each with 4 bays, 3.3 m wide, and 3 beam levels per bay. Shelf load capacity: 3,250 kg per level. Scope of delivery: - 50 frames (RM5011 - RAL5019), including base plates, shims, and fastening materials - 40 spacers/connectors for double rows (ZAbh20) - 200 floor anchors (ZZBA1210) - 240 individual beams (T33135 - RAL2008) - 10 impact guards/collision protectors (ZRS40901) - 10 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Shipping / Delivery: - Maximum 20 working days after receipt of payment - Delivered free to construction/installation site - Unloading from truck to be carried out by the buyer using their own forklift - Deliveries are made throughout the entire territory of the Federal Republic of Germany (except islands); deliveries to EU countries are subject to individual agreement. Iijdpfx Aozrbxcsatof

Condition: ready for operation (used), Year of construction: 1998, operating hours: 29,598 h, clamping force: 5,500 kN, screw diameter: 80 mm, total height: 2,230 mm, overall weight: 20,000 kg, product length (max.): 8,840 mm, This Engel Duo 3550/550 Tech was manufactured in 1998. It features a clamping force of 5500 kN, a maximum injection volume of 1960 cm³, and a screw diameter of 80 mm. The machine dimensions are 8840 x 2520 x 2230 mm, and it weighs 20,000 kg. If you are looking to get high-quality injection moulding capabilities, consider the Engel Duo 3550/550 Tech machine we have for sale. Contact us for more information. • Maximum injection volume: 1,960 cm³ • Minimum mould height: 310 mm • Maximum mould height: 800 mm • Platen opening stroke: 850 mm • Platen dimensions (W x L): 1,345 x 1,280 mm • Tie-bar distance (H x V): 915 x 860 mm • Motor power: 55 kW • Heater power: 47.5 kW • Injection nozzle radius (at tip): R35 • Centering ring diameter: 200 mm • Number of cores: 0 • Number of heating zones: 0 • Operating hours: 29,598 h • Condition: Excellent Iedpfx Aajx Nr H Ijtsif Additional equipment • Robot: Not equipped • Robot interface: None • Other accessories: None reported

Condition: defective spare-parts repository (used), Year of construction: 2006, functionality: not functional, machine/vehicle number: 160091, clamping force: 2,200 kN, Title: ENGEL Victory 1350/220 Tech (2006) - Tie-barless - Incl. Original ENGEL spare parts offer! General condition: The machine was in production use until recently. It is currently being sold as "in need of repair / for spare parts" (not functional due to damage to the internal hydraulic pump). Ideal for dealers, machine repair companies, or injection molding companies with their own repair facilities. Additional advantage / bonus: We will provide the buyer with the official ENGEL repair offer (total value: approx. €20,200). This includes the exact original part numbers (OEM) for all required components (hydraulic pump combination RKP140_80, Rexroth/STAR linear systems, piston rod seals, and complete wear ring sets). This will save you time in troubleshooting and provide the perfect template for the repair. Technical data: Manufacturer: ENGEL (Austria) Model: Victory 1350/220 Tech Year of manufacture: 2006 Machine no. (serial number): 160091 Clamping force: 220 tons (2,200 kN) Tie-barless technology: Maximum flexibility for large molds and quick changeovers Tie bar diameter: 60 mm (large-volume version) Control system: CC100 / CC200 Machine weight: approx. 14,200 kg Iiodpfx Aszc Hn Seatjf Terms of sale: Sale is strictly "as is" (ex works / EXW). The buyer bears all costs for disassembly, packaging, loading, and transport. Inspection on site is possible after prior arrangement.

Condition: repair required (used), Year of construction: 1999, operating hours: 33,400 h, functionality: limited functionality, machine/vehicle number: 70185/300/99, screw diameter: 45 mm, injection pressure: 2,038 bar, total length: 7,200 mm, total width: 2,000 mm, total height: 2,500 mm, overall weight: 22,000 kg, For sale is an ENGEL ES650/330/300 TL injection molding machine in a C-frame design. The machine is ideal for repair, modernization, or as a source of spare parts. Technical data: Manufacturer: ENGEL Type: ES650/330/300 TL Iodpfx Aozrngyeatoif Year of manufacture: 1999 Machine number: 70185-300-99 Clamping force: 3,000 kN Design: C-frame 1 horizontal injection unit Screw diameter: 45 mm Injection volume: 292 cc Injection pressure: 2,038 bar Max. injection temperature: 450 °C Min. tool mounting height: 400 mm Max. distance between mounting platens: 1,300 mm Ejector stroke: 200 mm 3 hydraulic core pulls Dimensions and weight: Length: 7.20 m Width: 2.00 m Height: 2.50 m Total weight: approx. 22,000 kg Connection values: Pump drive power: 37 kW + 11 kW Heating power: 15.3 kW + 9.2 kW Fuse rating: 250 A Condition The machine is generally functional but requires repair or maintenance. An inspection of the machine is strongly recommended. Further information on the condition can be provided upon request. Sale Location: [Insert location] Inspection possible by appointment Sale from the location Please contact us for further information, images, or to arrange an inspection.

Condition: used, functionality: unexamined, Ferwood Code: RU0010431 - Manufacturer Code: GNM 5480-B4 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Iodpfx Aev Iz Iasatoif

Condition: used, Year of construction: 2013, General information Colour: Rot Weights Empty weight: 1.250 kg Functional Lifting capacity: 200 kg Working height: 1.990 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Transport dimensions (LxWxH): LxB 7,65 x 1,65 m Production country: DE Additional information Please contact Christian Theißen for more information Units: 912522 Manufacturer: Emminghaus Model: Pionier 85-6-20 Year of build: 2013 Condition: Used Data: Max. lifting height: 19,90 m bei 85° Lifting capacity: 200 kg Platform dimensions LxW: 1,25 x 0,90 m Platform dimensions extended LxW: 2,08 x 1,32 m Support width: 4,00 x 4,00 m Iijdsv Tc Ryjpfx Aatsf Transport dimensions LxW: 7,65 x 1,65 m Weight: 1.250 kg Special features: can be rotated on chassis, ball-head coupling.

Condition: new, Engel D 2965.1/2-G27-B5.15 engine, serial number as shown in the photo, unused, 100% functional, scope of delivery as shown in the photos. Iedpfxei D Hu Ts Aateif

Condition: excellent (used), Screw cylinder complete with screw, cylinder head and closure nozzle Iisdpfxjfnqapj Aatof for ENGEL injection unit size ES3550

Condition: excellent (used), Year of construction: 2005, ENGEL VICTORY 2050/300 POWER injection molding machine Machine type: Tie-Bar-Less Year of manufacture: 2005 Serial number: 155108 Control system: ENGEL CC200 Operating hours: 88,000 h Technical specifications: Clamping force: 3000 kN (300 t) Design: Tie-Bar-Less Closing unit: Hydraulic POWER Opening stroke: 900 mm Minimum mold height: 350 mm Maximum daylight: 1250 mm Dimensions of mounting plates: 1100 × 1000 mm Injection unit: 2050 Screw diameter: 70 mm Injection volume: 1155 cm³ Injection weight (PS): approx. 1050 g Injection pressure: approx. 1700 bar L/D ratio: approx. 20:1 Control system: ENGEL CC200 Robot interface: Yes Robot: Not included Hydraulic core control: 2 units Power supply: 400 V / 50 Hz Hydraulic system: POWER Central lubrication: Yes Oil cooling: Yes Machine length: approx. 7300 mm Machine width: approx. 2200 mm Machine height: approx. 2500 mm Iiedpjzrv A Njfx Aatjf Machine weight: 20,400 kg

Condition: excellent (used), Year of construction: 2010, Engel Victory 1050/220 Tech with Wittmann W721 robot Year of manufacture: 2010 Injection unit: Screw diameter: 55 mm Shot weight: approx. 480 g Injection pressure: 2053 bar Dosing volume: 511 ccm Clamping unit: Clamping force: 220 t Tie bar spacing: 0x0 mm Platen size: 880x830 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - Touchscreen Additional equipment: Tie-bar-less machine Euromap 67 Robot interface Air valve x 3 Hydraulic core pull x 3 Control system with hot runner system x 30 Injection unit hardened - bimetal Proportional valve on the injection unit – precise injection Dimensions: Weight: 12200 kg Iijdpfx Aaezpaukjtjf Length/Width/Height: 5.66x1.88x2.10 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2016, Engel Victory 2050/260 Tech Ecodrive with Engel Viper 20 robot / hybrid machine / operating hours: approx. 20,000 hours in automatic mode Year of manufacture: 2016 Injection unit: Screw diameter: 70 mm Shot weight: approx. 1020 g Injection pressure: 1780 bar Dosing volume: 1155 ccm Clamping unit: Clamping force: 260 t Tie bar spacing: 0x0 mm Platen size: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 300 - touchscreen Isdpjzpat Tefx Aatoif Additional equipment: Production line with Engel Viper 20 robot Tie-bar-less, hybrid machine: energy-saving and very quiet Operating hours: approx. 20,000 in automatic mode Robot interface Air valve x 4 Hydraulic core pull x 2 on the side of the moving platen Hydraulic core pull x 6 on the side of the stationary platen Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - servo motor driven by an inverter - energy saving Proportional valve on the injection unit – precise injection Kistler sensor - tool pressure control Automatic, hydraulically operated tool mounting system, controlled via the machine control panel Integrated automatic cooling water regulator e-flomo with heating function Robot Engel Viper 20 Year of manufacture: 2016 6-axis robot: 6 axes are driven by servo motors (electric): X, Y, Z, B, C, A Payload: 11 kg Touch control panel Safety package for robots Robot with adapter, conveyor belt and safety enclosure Purchase of the robot and conveyor belt for an additional charge Dimensions: Weight: 21000 kg Length/Width/Height: 7.36x2.06x2.37 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2010, Engel Victory 2550/350 Tech with Engel Viper 40 robot Year of manufacture: 2010 Injection unit: Screw diameter: 80 mm Shot weight: approx. 1410 g Injection pressure: 1638 bar Dosing volume: 1558 ccm Clamping unit: Clamping force: 350 t Tie bar spacing: 0x0 mm Platen size: 1200x1100 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 200 - Touchscreen Additional equipment: Production line with Engel Viper 40 robot Tie-barless machine Robot interface Air core puller x 4 on the side of the fixed platen Hydraulic core puller x 2 on the side of the moving platen Hydraulic core puller x 1 on the side of the fixed platen Control system with hot runner system x 12 Injection unit is wear-resistant and resistant to corrosion Proportional valve on the injection unit – precise injection Robot Engel Viper 40 Year of manufacture: 2010 6-axis robot: 5 axes are driven by servomotors (electric): X, Y, Z, B (rotation), A; axis C - pneumatic Touch control panel Iiedpezpatmefx Aatsf Safety package for robots Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt available for an additional charge Dimensions: Weight: 25100 kg Length/Width/Height: 7.59x2.18x2.30 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2003, 1,0 St. gebr. Spritzgießmaschine Hersteller: ENGEL Typ: VICTORY 80/25 TECH Baujahr: 2003 Schließkraft: 25 Tonnen Holmabstand: HOLMLOS Schnecken DN: 22 mm Max. Hubvolumen: 36 ccm³ Spritzteilgewicht 34 g/PS Iiodpfx Aoxgi Etsatef Steuerung: CC100 Ausstattung: -1 x Kernzug -Ausblasventil

Condition: excellent (used), Year of construction: 2004, 1,0 St. gebr. Spritzgießmaschine Hersteller: ENGEL Typ: VICTORY 80/25 TECH Baujahr: 2004 Iiodpfsxg H Hbex Aatjf Schließkraft: 25 Tonnen Holmabstand: HOLMLOS Schnecken DN: 22 mm Max. Hubvolumen: 36 ccm³ Spritzteilgewicht 34 g/PS Steuerung: CC200 Ausstattung: -1 x Kernzug -Ausblasventil

Condition: excellent (used), Year of construction: 2018, ENGEL DUO 5160/700 injection molding machine Year of manufacture: 2018 Operating hours: 54,823 h Technical condition: Very good, the machine has undergone a major overhaul of its components and is ready for further operation. Clamping unit Clamping force: 7,000 kN (700 tons) Dimensions of mounting plates: 1510 × 1440 mm Distance between columns: 1100 × 960 mm Minimum mold height: 450 mm Maximum mold height: 950 mm Maximum opening: 1850 mm Ejector stroke: 250 mm Injection unit Screw diameter: 80 mm Injection volume: 2061 cm³ Injection weight (PS): 1916 g Maximum injection pressure: 2300 bar Electro-hydraulic equipment Pump motor power: 109 kW Heater power: 40.7 kW Dimensions and weight Dimensions (L × W × H): 8.20 × 2.78 × 2.32 m Machine weight: approximately 20 tons Additional service work performed The machine has undergone extensive and costly service work, which significantly increases its value and reduces the operational risk for the future user. Recently performed: ✅ New P1 hydraulic pump – still under warranty. Iodpfxozqdago Aateif ✅ New ENGEL control panel – still under warranty. ✅ Replacement of 4 linear bearings in the clamping system.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 137,000 mm, shelf height: 5,000 mm, number of shelf rows: 10, clear span: 3,300 mm, frame height: 5,000 mm, frame width: 1,100 mm, load per truss pair (max.): 3,250 kg, shelf length: 137,000 mm, support length: 3,300 mm, 2 single-row pallet racks + 4 double-row pallet racks, each 13.7 m long, 5 m high, 1.1 m deep. Each with 4 bays, 3.3 m wide, and 3 beam levels per bay. Shelf load capacity: 3,250 kg per level. Scope of delivery: - 50 frames (RM5011 - RAL5019), including base plates, shims, and fastening materials - 40 spacers/connectors for double rows (ZAbh20) - 200 floor anchors (ZZBA1210) - 240 individual beams (T33135 - RAL2008) Isdezm Ek Espfx Aatoif - 10 impact guards/collision protectors (ZRS40901) - 10 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Shipping / Delivery: - Maximum 20 working days after receipt of payment - Delivered free to construction/installation site - Unloading from truck to be carried out by the buyer using their own forklift - Deliveries are made throughout the entire territory of the Federal Republic of Germany (except islands); deliveries to EU countries are subject to individual agreement.

Condition: excellent (used), Year of construction: 2004, ENGEL DUO 11050/2300 Injection Molding Machine Manufacturer: ENGEL Model: DUO 11050/2300 Year of manufacture: 2004 Operating hours: 70,029 h Type: Hydraulic injection molding machine Category: Large-size injection molding machine Clamping force: 23,000 kN / 2300 tons Clamping Unit Clamping force: 23,000 kN Dimensions of mold mounting plates: 2900 x 2500 mm Distance between columns: 2000 x 1600 mm Minimum mold height: 700 mm Maximum mold height: 1890 mm Maximum opening width: 3800 mm Injection Unit Screw diameter: 135 mm Injection volume: 8870 cm3 Injection weight (PS): 8071 g Injection pressure: 1600 bar Additional equipment according to available data Number of hydraulic cores: 2 Number of mold heating zones: 36 Number of hydraulic cascades: 10 Magnetic platens Mold tilting option Screw replaced in 2011 Iijdszkatcspfx Aatjf Screw reinforced for special materials Machine without robot Dimensions and weight Weight of the main unit: 113 t Weight of the control cabinet / additional components: 18 t Approximate total weight: 131 t

Condition: excellent (used), Year of construction: 2010, Injection Moulding Machine ENGEL DUO 5550/1100 Robot: ERC 200 Year of manufacture: 2010 Operating hours: approx. 79,000 h Clamping force: 1,100 tons Injection Unit – 5550 Screw diameter: 90 mm Injection pressure (specific): 2,180 bar Iiodow U Sz Iepfx Aatef Injection volume: 2,740 cm³ Screw L/D ratio: 22 Cylinder: type M3, bimetallic – increased wear and corrosion resistance Screw: type S4V, heat-treated, chrome-plated, with armoured edges – high wear and corrosion resistance Clamping Unit – DUO 1100 Clamping force: 1,100 tons Distance between tie bars: 1,400 x 1,150 mm Mould height: from 600 mm to 1,200 mm Ejector stroke: 300 mm Equipment Hydraulic cores: 2+1 Pneumatic cores: 1+1 GK heating zones: 3 x 8 = 24 zones Rotameters: 20 circuits Control system: CC 200 A02 Installed programs: - Micrograph Plus - Microplast - QDP - PD Graphics II Robot ERC 63/1-F, RC 200 X-axis: 1,300 mm Y-axis: 1,800 mm Z-axis: up to 2,840 mm C-axis: rotary movement 0–90° 2 vacuum circuits 1 pressure circuit for sprue removal

Condition: excellent (used), Year of construction: 2011, Machine: ENGEL DUO 5550/650 pico Control unit: CC200 Year of manufacture: 2011 Operating hours: 61,606 h Robot: Viper 40 1. Clamping Unit Clamping force: 6,500 kN Clearance between tie bars (H × V): 1,100 × 960 mm Iedpfsyw Aa Uox Aateif Platen dimensions (H × V): 1,510 × 1,440 mm Mould height (min./max.): 650 / 1,150 mm Mould opening stroke: 1,400 mm Maximum platen distance: 2,050 mm Maximum mould weight: 11,000 kg Ejector force: 95 kN Ejector stroke: 250 mm Tie bar diameter: 175 mm 2. Injection Unit (Aggregate 5550) Screw diameter: 90 mm (reinforced for up to 30% fiber content) Maximum injection volume: 2,740 cm³ Maximum shot weight (PS): 2,520 g Injection pressure (max./boost): 2,180 bar Injection pressure (standard): 1,910 bar Screw L/D ratio: 20 Screw stroke: 430 mm Maximum screw speed: 148 rpm Plasticising rate: 77 g/s Nozzle contact force: 150 kN 3. Drive and Power Supply Installed drive power: 90 kW Barrel heaters power: 56 kW Number of heating zones: 6 Hydraulic oil tank capacity: 1,000 l 4. Special Equipment and Hydraulics Core pull circuits: - 6 hydraulic circuits on the moving platen - 2 hydraulic circuits on the fixed platen Cascade valves: 4 units (installed on the fixed platen) 5. General Description Two-platen machine (DUO series) designed for large-scale plastic part production. The design ensures: - High rigidity of the clamping system - Capability for operation with heavy moulds and large opening strokes Additional information: - Screw reinforced for operation with up to 30% fiber content - All hydraulic hoses replaced in Q4 2024 - Machine condition: excellent, ready for production Availability: Immediately available, professionally maintained, and ready for instant operation.

Condition: excellent (used), Year of construction: 2011, ENGEL DUO 5550/650 pico injection molding machine ENGEL robot Control system: CC200 Iijdpfxoywrtwo Aatsf Year of manufacture: 2011 Operating hours: 61,606 h Technical data Clamping unit Clamping force: 6500 kN (650 tons) Distance between columns (H × V): 1100 × 960 mm Platen dimensions (H × V): 1510 × 1440 mm Mold height (min./max.): 650 / 1150 mm Mold opening stroke: 1400 mm Maximum distance between platens: 2050 mm Maximum mold weight: 11,000 kg Ejector force: 95 kN Ejector stroke: 250 mm Column diameter: 175 mm Injection unit Screw diameter: 90 mm Maximum injection volume: 2740 cm³ Maximum injection weight (PS): 2520 g Maximum injection pressure: 2180 bar Standard injection pressure: 1910 bar Screw L/D ratio: 20:1 Screw stroke: 430 mm Maximum screw speed: 148 rpm Plastication rate: 77 g/s Nozzle clamping force: 150 kN Drive and power supply Drive power: 90 kW Cylinder heater power: 56 kW Number of heating zones: 6 Hydraulic oil tank capacity: 1000 l Hydraulic equipment 6 hydraulic circuits on the moving platen 2 hydraulic circuits on the stationary platen 4 cascade valves on the stationary platen ENGEL robot ENGEL linear robot Integrated with the machine control system Designed for automatic part removal Robot control from the CC200 system Synchronization of robot operation with the injection molding machine cycle