Used Double Sided Squaring/Edgebanding Machines for sale (82,964)

Condition: used, Year of construction: 2004, grinding wheel diameter 660 mm Control Siemens 840D Bodpfx Ajxq R Haskwowp work piece width min. 5 / max. 180 mm max. workpiece diameter 200 mm weight of the machine ca. 15,0 t dimensions of the machine ca. L 3,1 x B 4,0 x 2,7 m In our opinion, the machine is in good used condition. The machines were used for the production of connecting rods. Two machines are available. One machine is suitable for pre-grinding and one for regrinding. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Lot offer of 4 used pole gitterbox DB according to UIC standard 435-3 Buy your used DB gitterboxes directly from Europe's largest supplier. This steel mesh container is one of the most widely used/sold load carriers in the industry, especially in the steel industry due to its high load capacity and stackability. This mesh Bodpfxox Ahths Akwowp

Condition: used, Batch offer of 10 used Poolgitterbox DB according to UIC standard 435-3 Bwjdpfx Ajx Ahtbokwjp Buy your used DB gitterboxes directly from Europe's largest supplier. This steel mesh container is one of the most widely used/sold load carriers in the industry, especially in the steel industry due to its high load capacity and stackability. This mesh

Condition: used, Used Pool gitterbox DB according to UIC standard 435-3 Bodpfx Aex Ahr Rjkwewp Buy your used DB gitterboxes directly from the largest supplier in Europe. This steel mesh container is one of the most used/sold load carriers in the industry, especially in the steel industry due to its high load capacity and stackability. This mesh container is

Condition: used, Used gitter box directly available at Kruizinga. nl. This high quality steel mesh container is one of the most used/sold load carriers in the industry, especially in the steel industry due to its high load capacity and stackable capacity. Bwodex Ahr Dspfx Akwop This mesh container is ideal for small parts and very practical to use because of the 2 steel

Condition: used, machine/vehicle number: 007357, Position 1: Panel Feeding and Loading BIESSE - RBO-STREAM SB2 9.5 Position 2: Double Sided Squaring/Edgebanding Machines BIESSE - RBO-STREAM SB2 9.5 Bwsdpfxewuz Rto Akwjp Position 3: Panel Turning Device BIESSE - RBO-STREAM SB2 9.5 Position 4: Double Sided Squaring/Edgebanding Machines BIESSE - RBO-STREAM SB2 9.5 Position 5: Panel Turning Device BIESSE - RBO-STREAM SB2 9.5 Position 6: Panel Stacking and Offloading BIESSE - RBO-STREAM SB2 9.5

Condition: used, machine/vehicle number: 007857, Position 1: Horizontal Storage Systems IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 2: Beam panel saws with automatic warehouse IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 3: Single Edgebanders IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 4: Panel Feeding and Loading IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 5: Panel Stacking and Offloading IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 6: CNC Machine Centres For Routing, Drilling And Edgebanding. IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 7: CNC Machine Centres For Routing, Drilling And Edgebanding. IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 8: Cardboard Cutters IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 9: Strapping machine IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Bjdpfjwuuf Dox Akwowp

Condition: good (used), Year of construction: 2001, functionality: fully functional, IMA HKA manual edge banding machine in fully functional condition. Edge banding machine for shaped parts. Various pneumatic hoses have just been completely replaced. Edge thickness: 0.4 - 3 mm Board thickness: 16 - 45 mm Strip feed: 20 - 50 mm Power consumption: 2.6 kW Minimum outer radius: Dependent on the bending suitability of the edge material Minimum inner radius: 150 mm, depending on the material properties With gantry and spring tension Bwedpex H Un Aefx Akwsp Vacuum clamping table with 4 switchable zones Rollers, vacuum supports (plus additional new rubber sets) for the vacuum table #C1

Condition: used, Year of construction: 1990, pressure 160 t Bodpfoyx Ii Dex Akwewp stroke 20 - 120 mm no. of strokes 30 - 180 /min distance between columns 1510 mm column travel -side 400 mm dayligth 820 mm table surface area 1430 x 900 mm hole in the table 1010 x 320 mm table height over floor 890 mm ram surface 1300 x 800 mm ram adjustment 100 mm material width 20 - 400 mm material thickness 0,3 - 5,0 mm feed length 1,0 - 9999,9 mm power requirement 52,0 kW weight of the machine ca. 29,0 t dimensions of the machine ca. 3,7 x 2,5 x 4,0 mxmxm with infinitely variable drive, back gears, pneumatic clutch/brake combination, hydraulic overload protection in ram, motoric ram adjustment, pneumatic counterbalance in ram, bolster plate, motoric centralized lubrication, electronic press force monitoring electronic roll feed Type KWV 400 ZDH 120 (YOM 2003), band-material oiler

Condition: used, Year of construction: 1997, pressure 130 t distance between columns 1600 mm stroke 8 - 140 mm no. of strokes 50 - 200 Hub/min dayligth (stroke and adjustment up) 520 mm column travel -side 610 mm table surface area 1600 x 880 mm Bodpjvuugcofx Akwewp hole in the table 1000 x 350 mm table height over floor 950 mm ram surface 1600 x 880 mm power requirement 24,2 kW weight of the machine ca. 28,00 t required space 4,3 x 2,2 x 3,8 m ram adjustment 100 mm with infinitely variable drive, hydraulic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, automatic stroke adjustment, electronic roll feed (Hensel, EVX 500) with hydraulic intermittent lifting 2025 - in progress: new electrical (safety) control - Siemens S7-1500 F, easy operation via touch-panel Video at seller's site before dismantling available

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: snr: 1015, number of cylinders: 2, drive type: Servo Siemens, number of previous owners: 1, input voltage: 400 V, input frequency: 50 Hz, number of print heads: 1, air pressure: 6 bar, control voltage: 24 V, nominal power (apparent): 15 kVA, sieve area: 260,000 mm², sieve perforation: 10 mm, space requirement height: 3,500 mm, space requirement length: 8,000 mm, space requirement width: 2,000 mm, year of last overhaul: 2025, control type: PLC-controlled, number of digital displays: 1, production capacity: 9,000 unit/h, Equipment: CE marking, cooling unit, emergency stop, type plate available, Fully functional sachet machine for solids, recently taken out of production due to a change to a different packaging format. The machine produces four-sided sealed sachets from paper-foil with a PE layer. Standard sachet size: 70 x 150 mm external dimensions, with a usable internal volume of approximately 25 to 30 ml. The hanging hole with tear-off feature, in the reinforced top part, can be disabled if desired. The machine includes, among other things: * Automatic film tension and film alignment system; * Videojet inkjet printer, Meler hotmelt unit; Cooling unit, chip extraction system; * Siemens control and servo, Festo pneumatics; * Reinforced hanging edge through multilayered film fold and hotmelt adhesive; * Integrated punching functions for hanging hole, tear-off feature, and alignment mark (can be disabled); * Carousel system for opening, inspection, dosing, sealing, and ejection; * Automatic box selector; * Vibrating screen, infeed conveyor, hopper, and volumetric dosing system. The machine has always been well maintained and recently underwent an overhaul in which both the servomotor and the associated drive were replaced. Annual maintenance was consistently performed. Bedpfx Aszgv Dvekwewp The machine can be demonstrated in working order. Includes cabinet with spare parts, printed Dutch and German manuals, parts drawings, electrical diagram, and documentation on CD. Terms of sale: The machine is sold EXW (Incoterms® 2020) at the seller's location. Dismantling, internal transport, loading, transport, unloading, and reinstallation are entirely at the buyer's expense, risk, and responsibility. Technical support during dismantling and internal transport can be provided, but it is purely advisory and does not imply any liability on the part of the seller. Additional information or a demonstration can be provided upon request.

Condition: used, Year of construction: 1969, Used machine Year of manufacture: 1969 Runs perfectly Max. working width: 170 mm Bodpfx Ajxavtqskwjwp Max. working height: 130 mm 1st shaft: bottom 2nd shaft: right 3rd shaft: left 4th shaft: right 5th shaft: top Availability: short-term Storage location: Röllbach

Year of construction: 2020, condition: new, Double-sided miter stop Year of manufacture: 2020 For the quick and stepless production of miter cuts on narrow and short workpieces at any angle from 0° to 90° Bwjdpfokwhalsx Akwsp For cutting to a length of up to 1375 mm Easy to handle and quick to mount on the saw’s roller carriage Suitable for Panhans models 680_10_20 Conversion kit for other models available upon request Availability: short-term Location: Hochheim

Condition: used, Year of construction: 2003, Used machine Bwedpsxymfwofx Akwep Year of manufacture: 2003 Equipment and technical data: - MAGELIS control system - For EVA-based hot-melt adhesive - Jointing: 2 x 1.5 kW, u=12000, 200 Hz - End trimming: 2 x 0.2 kW, automatic swiveling 0°/3°, 2 HM saw blades 140 mm - Flush trimming: 2.07 kW, with WPL heads HF 70, diameter 70 mm - Radius trimming: R2 - Radius scraper - Surface scraper - Glue pot above - Workpiece dimensions: - Minimum width: 70 mm - Thickness: 8-42 mm - Minimum length: 150 mm - Edge thickness: 0.2-6 mm - Feed rate: 12 m/min - Extraction port: 160 mm Dimensions: 4,500 x 1,250 x 1,300 mm Weight: 1,650 kg Availability: short notice Location: Baden-Württemberg

Condition: used, total length: 1,700 mm, total width: 1,200 mm, total height: 1,700 mm, overall weight: 600 kg, grinding belt length: 3,000 mm, grinding belt width: 200 mm, power: 4 kW (5.44 HP), No. 04535 Two-sided edge sanding machine HÖFER BSM V pn / BSM 5 pn Used Double-sided edge sanding machine Drive motor 4 kW Oscillation motor 0.75 kW Bjdpfezg Itvjx Akwewp Belt speed 22 m/s Pneumatic belt tensioning Pneumatic height adjustment Belt dimensions 3000 x 200 mm Front sanding table 900 x 400 mm, pneumatically tiltable up to 45° Rear sanding table 900 x 400 mm, with veneer edge sanding device Transport dimensions approx. 1700 x 1200 x 1700 mm LWH Weight approx. 600 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: used, Year of construction: 1998, control Siemens Sinumerik grinding wheel diameter 900 mm grinding wheel width 20-80 mm In our opinion, the machine is in good condition used condition. Double face side grinders Bodpfx Ajxuv Udjkwswp The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2015 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clockwise, counterclockwise), 2x4kW, rear motor w. jumping function GLUING SECTION V20, consisting of: - QA60 glue application unit, with PTFE-coating (Teflon), with manual quick-adjustment glue gates - pneumatic clamping of glue application in mount - Pre-melter for EVA glue - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - modes: edge rolls, (veneer) strips, solid wood edging - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK85 horizontal, 2 motors, with straight/chamfer cutting function - Rough trimming 2x1.15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with various trimming heads, motorised adjustment - Universal trimming unit, (e.g. grooving), 3.5 kW, tiltable, w. electro-pneumatic jumping control - Multi-Profile (radius-) scraping MN11 with automatic positioning by NC-axis (CAN) - Flat scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers) - Buffing unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 Bwodozina Ijpfx Akwop Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: used, PTP VPU 1 Conventional milling machine Table dimensions: 260x1000mm Taper: 40mm X axis: 500mm Y axis: 300mm Z axis: 400mm Bwsdpfx Aorzbktjkwjp Dimensions: 170x130x145mm Variable speed Vertical and horizontal use Power supply Head adjustable in degrees With cooling pump Location: Hamont-Achel, Belgium Call or mail for more information See also our other advertisements We are also looking for industrial machines throughout the year. Do you have redundant machines, mail them to us with pictures and information. PTP VPU 1 Conventional Milling Machine Table dimensions: 260x1000mm Cone: 40mm X axis: 500mm Y axis: 300mm Z axis: 400mm Dimensions: 170x130x145mm Variable speeds Can be used vertically and horizontally Power supply Head adjustable in degrees With cooling pump Location: Hamont-Achel, Belgium Call or email for more information Also view our other advertisements We are also looking for industrial machines all year round. If you have redundant machines, email them to us with photos and information. PTP VPU 1 conventional machines Table dimensions: 260x1000mm Cone: 40 mm X axis: 500 mm Y-axis: 300 mm Z-axis: 400 mm Dimensions: 170x130x145mm Variable speeds Can be used vertically and horizontally Power supply Head adjustable in Grad With vacuum pump Standort: Hamont-Achel, Belgium Für weitere Informationen rufen Sie an oder senden Sie eine E-Mail Sehen Sie sich auch unsere anderen Anzeigen an Wir sind auch das ganze Jahr über auf der Suche nach Industriemaschinen. Wenn Sie über redundante Maschinen verfügen, senden Sie uns diese per E-Mail mit Fotos und Informationen

Condition: excellent (used), Double grinding wheel stand Rema / Schulmaschine Wheel dimensions (in mm): 300/40/76 Power (in kW): 1.8 Speed (RPM): 1450 Voltage: 380 Volt Bedpfxohaf Nds Akwowp Lamp Protective shields Location: Available from stock in 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1969, grinding height 60 mm grinding width 120 mm grinding wheel diameter 600 mm grinding length mm workpiece height 60 mm total power requirement 50 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m D I S K U S (Germany) Double Side Vertical Spindle Surface Grinder, C-Frame Design, with Rotary Workpiece Feeding System and Automatic Dressing Device Model DDS 600 CR-A Year 1969 Serial-No. 6672 _____ Bwedpfxst Hw N Ho Akwsp Grinding wheels Ø x bore, each 600 mm Grinding wheels height x width, approx. 60 mm Workpiece dimensions: Grinding height x grinding width, approx. 60 x 120 mm Vertical adjustment of each grinding head 150 mm External Ø of workpiece carrier disk, approx. 810 mm Feeds of rotary workpiece feed system 14 – 145 mm/sec Grinding wheel speeds, each, infinitely variable 765 rpm (24 m/s) Grinding spindle drive, each 22 kW Total electrical load, approx. 50 kW - 380 V - 50 Hz Total weight, approx. 7,000 kg Accessories / Special Features: * Rotary workpiece feed system with infinitely variable speed adjustment prepared with workpiece carrier disk approx. dia. 800 mm with relevant workpiece shaped pockets and after the grinding the parts will be automatically sorted out and collected in a collector box. * IONIC – Size Control Unit Model Nr. 9 So with measuring probe for the ground workpieces and with signal for the hydraulic infeed of the grinding wheel when size is not in order. * Automatic Dressing Device for the grinding wheels, hydraulically operated and with the automatic return of the grinding wheels after dressing cycle to the previously adjusted position and to continue the working cycle. Dressing cycle can be presetted by a timer or a manual release. * Manually operated infeed device of the Spindle slide to optimal workpiece thickness. * Spindle drives controlled by Ampere-Meters. * Separate switch cabinet. * Separate hydraulic unit. * Various carrier disks, etc. * Safety covers. * Central lubrication. * Large Coolant device with paperbandfilter This machine is ideal for double-sided simultaneous grinding of parallel workpiece surfaces by continuous method, for maximum output and accuracy in mass production (e.g. Piston rings, washers, hydraulic parts, and other punched parts.) Condition : Good . Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 2010, travel distance X-axis: 3,020 mm, travel distance Y-axis: 1,520 mm, • Monoblock structure in welded steel with a mobile gantry in steel. Bwedpsxxii Aefx Akwop • Processing speed up to 18 m/min. • Worktable: fixed table made of high-thickness aluminum profiles. • Hardened linear guides and preloaded ball-bearing carriages. • Transmission via precision ball screws on all 3 axes. • CN7000 numerical control with touch screen and brushless servo drives. • Available in 5 sizes for maximum flexibility. • Z 350 option for 3D applications. • Quality and performance suitable for good productivity. • Well-known ease of use. • Compliant with European safety regulations. • Numerous options: brushless servomotors, micro-lubrication, automatic tool changer, vacuum table (with turbine or vacuum pump), high-frequency spindles, contact engraving spindles, fourth axis.

Condition: excellent (used), Year of construction: 2012, CNC - 2 Spindle Horizontal Machining Centre, second-hand Immediately available / ready for operation Manufacturer: Schwäbische Werkzeugmaschinen - Schramberg, Germany Typ: SW BA 322 / Siemen 840 D sl: auf Windows basis und Power Line Servoantriebstechnik Year of construction: 12 / 2012 Axes: X 300 mm; Y 450 mm; Z 375 mm Work spindle: HSK 63 1-10.000 rpm. 25kW at 4,200 rpm. internal coolant supply 40 bar Tool magazine: Pick-up system; capacity 40 (2x20) tool places Workpiece holder; swivel carrier system Q - axis; Two independent swivel axes A - and U - axes Workpiece clamping hydraulics, workpiece support control Coolant system: 1,200 l; paper belt filter, cartridge filter, heat exchanger, high-pressure pump Chip conveyor: Scraper belt conveyor with lifting pump, ejection height 1,100 mm Automatic loading door Automatic rinsing cycle, manual spray gun Machine condition: cleaned, filled with necessary medium in clean condition and is in working order The machine has been checked by SW Maschinen-Service and can be inspected at any time by appointment. Bwodpfslxp Ufjx Akwsp Delivery: by arrangement, free loaded ex works, subject to prior sale

Condition: excellent (used), CATALOGUE NUMBER 7130 TECHNICAL DATA - Maximum working width: 800mm - Maximum working thickness: 200mm Top section: - Pawls - Toothed feed roller - 3 rows of pressure rollers - Planing shaft 810mm, for 4 knives (2 blades fitted), approx. 7.5kW - Pressure - Smooth, metal feed roller Bottom section: - Adjustable infeed table with slip roller - Planing shaft 810mm, for 4 knives (2 blades fitted), 7.5kW - Smooth, metal slip roller - Electric table raising - Extraction nozzle diameter: 120mm - Dimensions (L/W/H): 1900x1450x1350mm Bwodpfx Aezh I Amjkwep - Weight approx. 2500kg – Czech manufacture – Very good condition – Used planer Net price: 33,500 PLN Net price: 7,970 EUR depending on EUR 4.2 rate (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7993 TECHNICAL DATA - Loading fields: 2 - Side clamps, manually adjustable: 2x4 pcs - Vertical pneumatic clamps: 2x4 pcs - Max length of glued elements: 2500 mm - Max height of glued elements: 1330 mm - Max thickness of glued elements: 110 mm - Guides for gluing thin elements - Dimensions (L/W/H): 3000x1350x2000 mm - Weight: 900 kg ADVANTAGES – Two working zones – Gluing length of 2500 mm – Pneumatic cylinders Bwedpozh H Egsfx Akwop – Guides for gluing thin elements – Unpainted – Mobile – on wheels – Used press, in very good condition Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at the rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, machine/vehicle number: 007841, X axis working area: 4200 mm Bwodpfx Akjyg Ef Dewop Y axis working area: 1300 mm Working Table: Pod and Rail Main Electrospindle power: 18 KW Number of controlled axes: 4 axes Maximum edge height: 64 mm Total number of tool changer positions: 18