Used Calibrating And Sanding Lines for sale (16,428)

Condition: used, Cut-to-length line Bronx 2050x8mm x35t (A3781) for coil metal cross cutting into sheets of required sizes with different length and width. Thickness Range: 2 – 8 mm Coil Capacity: 35t Coil OD: 2100mm Coil ID: 508mm , 610mm , 762mm Gksdpeq Ulh Hsfx Ag Tea Strip Width: 2000mm – 600mm Sheet Length: 8000mm – 600mm Pack Weight: 10 t Max Line Speed: 60 meters/min Cuts Per Minute: 35 Complete Line With 4 Coil Storage Storage Ramp Coil Loading Car Double Stub Mandrel Uncoiler Sliding Base Hydraulic Expansion Drag Brake Tension Control Peeler / Hold Down Roll 3 Roll Coil Breaker Feed Up Table 7 Roll Backed Up Leveler with Pinch Roll Breaker (9 Rolls Total) Entry Power Pinch Rolls 3 Flights Top & Bottom Back-Up Rolls Entry & Exit Pinch Rolls Marking Unit Measuring Roll Pinch Rolls Bronx Flying Shear AC Die Accelerator Flywheel & Air Clutch and Brake Rack & Pinion Accelerator 35 Cuts per Minute Reject Conveyor Twin Belt Gauging Table Stacker Side Squaring Lift Stacking Tables Photo Cells Drop Type Motorized End Stop Motorized Run Out Conveyor Upgraded AC Motors Upgraded Control Techniques Digital Drives Complete Line

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Gkodefv Hphepfx Ag Tea Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, The best onion peeler in the world, the most expensive but the hardest, the most simplest ! Fully services, we can offer full support for our clients, machine been fully refusrbishment and ready to work. Capacity of peeled product depending of onion size: Pjtx Eswb Uuxodn Dorc 50-70 mm +-250 kg/h 60-80 mm +-450 kg/h 70-90 mm +-750 kg/h 90mm+ +- 1000 kg /h Machine is fully stainless steel ! Very little used after full service ready to work, we help you with technical support and with spare parts ! Machine require air screw compressor min 2700 l/m 5-8 bar Gkjdpfxexta U Ej Ag Tja We can help configurate your factory!

Condition: good (used), machine/vehicle number: 110283-110155, Year of construction: 2012, AUTOMATIC LINEAR HANDLE APPLICATOR MACHINE MANUFACTURER AND&OR MODEL 50SIA3000R&P2 SERIAL 110283-110155 YEAR 03/2012 CAPACITY 3000 Bph Included: * Bunker for handles & tranportation convejor * Handle side rejection system OMRON ALSO FOR SALE : TRINE T4400 Labelling machine €17,800 with HOT MELT glue. S/N: 032M44045 Labelling speeds: 60 to 350 cpm Godoquuv Ijpfx Ag Teka USED Wrap around labeller used for PET bottles. Used with 0.33 / 0.5L / 1.5L Volume

Condition: good (used), Year of construction: 2005, Type 1B/1K-M Max. length of workpiece. 5000 mm Max. workpiece width. 300 mm Quontity of mortising: 180 mm Gedpju Hi Trjfx Ag Toka Max. working height 1/Max 20mm Number of motors 2/380 V 50Hz Air pressure 6 bar Made in Italy 2005y Transport dimensions 4200x2000x2400mm Weight 2000 kg Price 4900 Eur (EXW Jonava, Lithuania)

Condition: used, Year of construction: 2007, Type 1B/1K-M Max. length of workpiece. 5000 mm Max. workpiece width. 300 mm Quontity of mortising: 180 mm Max. working height 1/Max 20mm Number of motors 2/380 V 50Hz Air pressure 6 bar Made in Italy 2007y Gedpfxoitvdns Ag Teka Transport dimensions 4200x2000x2400mm Weight 2000 kg Price 4900 Eur (EXW Jonava, Lithuania)

Condition: excellent (used), functionality: fully functional, empty load weight: 11,500 kg, maximum load weight: 25,410 kg, overall weight: 36,910 kg, axle configuration: 3 axles, first registration: 01/2008, suspension: air, tire size: 385/65R22.5, color: silver, Year of construction: 2007, Equipment: ABS, tail-lift, For sale: Professional livestock semi-trailer by Gray Adams, model GAdd3T/4, year 2007. The trailer has seen little use, is fully operational, has undergone a recent inspection, and is ready for immediate operation. =====•••••===== NOTICE! Option to purchase the entire set together with the 3-axle tractor MAN TGX 28.480 (6x2 drive), which the trailer was paired with. 2014 MAN model with extremely low mileage—only 268,000 km! Well-maintained, continuously serviced, ready for operation, Euro 5 standard. The tractor is equipped with a spacious, comfortable cab, leather seats, two beds, coffee maker, and electric sunroof. Price for tractor unit only: €12,900 net Discounted price for combined set: €45,900 net We offer delivery of the entire set to any address in the EU or to a port under preferential conditions! =====••••===== Gray Adams specialist trailers are robust and reliable designs, engineered for transporting cattle, horses, and other livestock. A new trailer of this type cost over 900,000 DKK (~600,000 PLN net ≈ €130,000), reflecting the high build quality and durability of the Gray Adams brand. =====•••••=====•••• Technical data – trailer: Brand/Model: Gray Adams GAdd3T/4 Year of manufacture: 2007 – in service since 2008 Transport dimensions: 13.6 m (L) × 2.55 m (W) × 4.0 m (H) Unladen weight: 11,500 kg Payload: 25,410 kg Gross vehicle weight (GVW): 37,000 kg Axles: 3 axles (including 1 steering axle) Suspension: air suspension Landing legs: JOST Tires: 385/65 R22.5 (approx. 60% tread) Brakes: disc brakes – components (S-cams) replaced in June 2021 Certification: CE Godpoxc Hzqjfx Ag Tjka Design and purpose: - Two-deck trailer – ideal for transporting larger quantities of animals - Full hydraulic system – safe and convenient operation - Remote-controlled hydraulic aluminum lift - Integrated water system – ensures optimal conditions for transported animals - Durable build and materials ensuring longevity Technical condition: - Trailer rarely used, maintained in very good condition - Regularly serviced – all maintenance performed promptly - Fresh inspection – fully roadworthy and ready for use =====••••===== Additional equipment: - Remote-controlled hydraulic lift - Integrated watering system - Complete documentation and CE certificates - High-quality components (JOST, pneumatic system, disc brakes) - Metallic paintwork =====••••===== Why choose this offer? - Top brand: Gray Adams – world leader in livestock trailer manufacturing - Durable and reliable construction – designed for intensive use - Recent inspection – guaranteed operational status - Very competitive pricing compared to a new unit (over 900,000 DKK!) - Ideal solution for livestock breeders, farmers, and transport companies

Condition: excellent (used), Year of construction: 2015, The Heuft Reflexx – high speed empty bottle and label inspector. Model Reflexx HBBRTIXX Spectrum TX controller Capacity to 50.000 bph. YOM 2015 EXCELLENT CONDITION It’s more than just a quick check. The HEUFT system diligently inspecting empty glass bottles for any defects before they move on to be filled is comprehensive quality assurance that brings immense value to the entire bottling process. Here’s why these HEUFT inspection solutions are so critical: 1. Full Coverage, Zero Blind Spots: The system doesn’t just glance at the bottle; it performs an all-surface, all-angle inspection of the base, sidewalls, finish, and threads. This level of detail is vital for spotting tiny defects the human eye can easily miss. 2. Advanced Detection Technologies: Utilizing a powerful combination of high-resolution cameras, smart AI image processing, and in some models, patented pulsed X-ray technology. This includes: - Glass Defects: Cracks, chips, inclusions, and finish damage. - Foreign Objects: Everything from foil and cigarette butts to insects, residual liquid (like caustic lye or oil), and, most dangerously, glass splinters hidden in the bottle base. 3. Low False Reject Rate: Thanks to intelligent image analysis (like HEUFT reflexx A.I.), they can distinguish between a critical defect and a harmless cosmetic blemish, meaning you don’t waste good, perfectly usable bottles. Godpfx Aeytrdtjg Tjka HEUFT SPECTRUM TX Controlling centrally: one platform for all requirements. Precise, network-compatible and cross-system: the HEUFT SPECTRUM TX forms the basis for different technologies, modules and functions. The devices of the generation of the same name can be exactly adapted to individual requirements on site and retrofitted at any time due to this universal platform.

Year of construction: 2019, condition: used, functionality: fully functional, Used decorative galvanizing line NICKEL CHROME The line consists of 19 tanks with dimensions 3m x 1.2m x 1.4m (4.5 tons) 1 dryer with 2 motors 2 transformers 12V–15V, 1200A Gkedpfx Ajy Hcmtsg Tja 1 transformer 12V–15V, 4000A 1 oil transformer 2 pumps with a voltage of 400V (three-phase) and a power of 1.5 kW If required, we can also offer a water treatment (purification) line, and the line can also be used as a plant for DEMI water production.

Condition: like new (used), Year of construction: 2008, functionality: fully functional, Complete factory equipment for sale: weaving, embroidery, dyeing, finishing, and processing. Many more machines are available. Textile Department * Jacquard Weaving: 11 × Picanol looms, Model 2004, XC 870 (Belgian) * Air-Jet Jacquard Weaving: 8 × Picanol looms, Model 2004 XL * Air-Jet Jacquard Weaving: 6 × Picanol looms, Model 2004, 5400 Jacquard Bonas, Jumbo * Complete set of air compressors, dryers, and air tanks required for operating the weaving machines. * Dobby Weaving: 4 × Picanol Omni looms, Model 1999 * Air-Jet Dobby Weaving: 8 × 2004 looms, 2.5 m working width, suitable for producing linen, gabardine, and dress fabrics (Picanol Omni Plus) * Rapier Weaving Machines (Chinese): Model 2014 – 4 units * Modern Warping Machine: 720 / 11 cones – 1 unit * Karl Mayer Weaving Machines: Model 2021 – 4 units * Karl Mayer Weaving Machines: Model 2017 – 2 units * Sizing Machine: 3 units ⸻ Embroidery Department * Saurer Epoca Embroidery Machines: 4 machines, equipped with 5 special attachments * Spooling/Winding Machines: Belinda – 9 units * Spooling/Winding Machines: Barmag – 1 unit, Kaltema – 2 units * Complete set of air compressors, dryers, and air tanks required for operation. * Mouline Thread Production Line with all accessories (embroidery threads). ⸻ Finishing Department * Rams: 1 × Brückner, 6-chamber, with Mahlo, Model 2002 * Stenters: 3 Turkish Damson machines * Fabric Inspection Machine: 1 unit * Sewing Machines: 30 units * Fabric Pressing and Packaging Machine ⸻ General Factory Utilities Gjdpsziz Dyjfx Ag Tjka * Industrial Chillers: 2 units * Steam Boiler: 6 tons, Riello burner, 2018 * Steam Boiler: 0.5 ton * Fabric Dyeing Jet Machine: 50 kg * Yarn Dyeing Machine (Hank): 600 kg * Yarn Dyeing Machine: 2 × 300 kg, complete with winding and unwinding system * Hydro Extractor: 1 for yarn + 1 for fabrics + 1 for hanks

Condition: new, functionality: fully functional, fuel type: hydrogen, color: other, Year of construction: 2026, Equipment: cabin, The fixed sand washing and screening plant is an advanced system designed for the high-efficiency separation and cleaning of natural sand and gravel. Developed with CONSTMACH engineering, these plants can be customized according to different production capacities, final product sizes, and washing requirements. Thanks to the plant's modular design, it can be easily integrated into any project area with different layout plans. It offers flawless washing performance with options such as a high-vibration feed bunker, a washing nozzle vibrating screen, and a helical or bucket washer. The hydrocyclone system ensures maximum efficiency in separating fine material. Furthermore, thanks to the PLC-controlled automation system, all processes are managed from a single point, minimizing the margin of error. CONSTMACH stationary sand washing and screening plants are equipped with SIEMENS and SCHNEIDER brand electronic components, offering long-term use and high durability. With these features, they are an ideal solution for companies that want to maintain high quality standards in aggregate production. Stationary Washing and Screening Plant Technical Specifications Production Capacity: 100 – 250 t/h Maximum Feed Size: 200 mm Feed Height: 4.5 meters Main Configuration: Feed Bunker + Washing Nozzle Vibrating Screen + Helical Washer / Bucket Washer / Dewatering Screen and Hydrocyclone + Conveyor Belts Total Motor Power: Varies according to production capacity Gksdpfexpxqqex Ag Tsa Electric Generator Requirement: Varies according to production capacity Weight: Varies according to production capacity Why Should You Choose CONSTMACH Stationary Washing and Screening Plants? CONSTMACH combines its long-standing engineering experience in washing and screening technologies with high quality standards. All systems provide long-term use with low maintenance costs thanks to their durable steel construction and energy-efficient motors. In addition, with project-based customization options, it offers full compliance with each customer's production goals. Thanks to its superior service network and fast spare parts supply, CONSTMACH plants preserve the value of your investment in the long term. What Does Constmach Do? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, Year of construction: 2026, machine/vehicle number: SÇ 401 Aluminyum Pvc Alttan Çıkma Kesim Makinası, functionality: fully functional, • Complies with CE standards. • Performs precise cutting at 0 - 180 degrees and intermediate angles. • Quick setting stops for 15, 22.5, 30, 45, 60, and 90 degree angles. • Table locking lever for intermediate angles. • Saw output speed regulator reduces speed when cutting aluminium, decreasing motor load. • Safety guard for secure cutting. Gkjdpfx Aoq U Tctjg Tsa • Diamond saw blade diameter: 450 mm, output distance: 12.5 cm. • Standard with measurement and transport conveyor (2.5 metres right and left). OPTIONAL • Cooling system and Hydro check system available for aluminium cutting. • Capability to work with a digital meter.

Year of construction: 2016, condition: ready for operation (used), functionality: fully functional, We offer these ready-to-use AUMA actuators and JC Spain gate valves, 10" to 42" gate valves with actuators, model "Valves for Oil Industry," year of manufacture 2016. High-performance gate valves Sizes: 10" to 42" Pressure class: 600 lbs, Stellite 6 hardfacing and 13% Cr trim (internal parts) Gkedpfsy D Iliex Ag Tsa BWE (butt-weld ends), wedge type gate valve, bolted bonnet, OS&Y ASTM A-216 WCB (cast carbon steel) The majority of units are equipped with explosion-proof, intelligent AUMA AUMATIC ExC actuators. Optionally, we can refurbish the actuators and gate valves and provide a factory acceptance test (FAT). Actuator manufacturer: AUMA Riester GmbH & Co. KG Model: 10" to 42" gate valves with actuator - 42" gate valves (2 units): equipped with AUMA SAEX 30.1 actuators. - 32" gate valve (1 unit): equipped with AUMA SAEX 16.2 / ACEXC 01.2 / GK40.2. - 30" gate valves (4 units): equipped with AUMA SAEX 16.2 / ACEXC 01.2 / GK40.2. - 30" gate valves (2 units): handwheel (can be fitted with actuators). - 16" gate valves (9 units): equipped with AUMA SAEX 14.6/GK30.2 Germany actuators (Ex-proof). - 10" gate valve (1 unit): handwheel Location: Ras al Khaimah, UAE If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: used, 72”x 0.5” x 60,000Lb Braner Turret Type Loop Slitting Line Braner Turret Type Loop Slitting Line is used for coil metal cross cutting with maximum width 72”, maximum 0,5” metal thcikness and 60,000Lb coil capacity Make: Braner Year New: 1996 Material Thickness: .060″ – .500″ Material Width: 12″ – 72″ Coil Weight: 60,000Lb Line Speed: 120 – 250 feet per minute Coil ID: 20″ – 24″ Coil OD: 75″ Slitting Cap: .500″ / 4 cuts – .125″ / 40 cuts Entry L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Control Panel Mandrel Uncoiler Powered Hold – Down Roll Outboard Bearing Support Hydraulic Feed-Up Drive Water Cooled Brake Hydraulic Peeling Table Driven Entry Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Two Turret Type Slitting Heads Arbor Diameter: 12″ Powered Arbor Adjustment Powered Head Rotation Motor: 100HP DC Drive Lots of Knives & Tooling Two (2) Scrap Winders Powered Open / Close Heavy Duty Design Looping Pit Cross Over Table Drag Board Tension Stand Material Feeding Table Recoiler Hydraulic Drum Powered Push Off Gkodpfx Ajrn Sqheg Tsa Hydraulic Over-Arm Separator Outboard Bearing Support 300HP DC Motor Drive Exit L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Upgraded Siemens Digital Drives, Electrics, Controls, Knives & Tooling

Condition: new, functionality: fully functional, Year of construction: 2026, Dry and Wet Ball Mill: Structure, Operation, and Technical Details A ball mill is a fundamental grinding device used in mineral processing, cement manufacturing, chemical production, and other industrial applications. It works by rotating a cylindrical shell filled with grinding media—usually steel balls—causing impact and friction that reduce materials to fine powder. Based on the grinding environment, ball mills are classified into dry and wet types, each suited for specific materials and process requirements. Working Principle Both dry and wet ball mills operate on the same mechanical principle. The rotating cylinder, driven by a motor through a gear system, lifts the grinding media and material along the inner wall. As the rotation continues, the balls fall under gravity, striking and grinding the material. The difference lies in the presence or absence of a liquid medium during grinding. Dry Ball Mill A dry ball mill is used when the material must remain moisture-free or when water could affect product quality. It is commonly applied in cement clinker, limestone, quartz, and refractory material grinding. The discharge can be either grate type or overflow type, depending on the desired fineness. Technical Features: Feeding size: ≤25 mm Discharge size: 0.075–0.4 mm Capacity: 0.65–90 t/h Liner material: High manganese steel or wear-resistant alloy Drive system: Gear-driven or direct-coupled motor Dust control: Equipped with air exhaust and dust collector Advantages: Suitable for materials sensitive to moisture No drying process required after grinding Lower corrosion risk and simpler maintenance Easier material classification and separation Limitations: Dry grinding produces more dust and heat, requiring efficient ventilation and dust collection systems. Wet Ball Mill A wet ball mill operates with water or another liquid medium added to the material. The slurry formed during grinding improves efficiency by reducing friction and preventing excessive heat buildup. It is widely used in ore beneficiation, ceramics, and chemical industries. Technical Features: Feeding size: ≤25 mm Discharge size: 0.074–0.2 mm Capacity: 0.65–615 t/h Liner material: Rubber or high-chromium steel Discharge method: Overflow or grate type Auxiliary equipment: Classifier, pump, and thickener for slurry circulation Advantages: Gsdjq Nx Alspfx Ag Tska Higher grinding efficiency and finer particle size Reduced dust and noise levels Continuous operation suitable for beneficiation circuits Better control of particle uniformity Limitations: Requires drying if the final product must be in powder form and involves more complex slurry handling. The selection between dry and wet grinding depends on the material characteristics, downstream process, and environmental conditions. Dry mills are preferred for materials that must stay moisture-free, while wet mills are ideal for fine grinding and slurry-based processes. Conclusion Dry and wet ball mills share the same mechanical structure but differ in their grinding environment and application scope. The dry type offers simplicity and low maintenance for moisture-sensitive materials, while the wet type provides higher efficiency and finer output for mineral and chemical processing. Understanding their technical parameters and operational differences ensures optimal equipment selection, improved productivity, and reliable performance in industrial grinding operations.

Condition: used, Year of construction: 2007, Auction of a drilling line with the following components: PRIESS EIN-Igel (Vertical storage system) PRIESS BAT-DTW-CNC PRIESS BAT-DTW-CNC PRIESS BMA DLS-CNC WANDRES CVT 05/1000 PRIESS Conveyor system TECHNICAL DETAILS Vertical storage system Max. panel width: 500 mm Max. panel length: 1,500 mm CNC drilling machine Machining process: Drilling Working area X-axis: 2,500 mm Working area Y-axis: 800 mm Max. panel thickness: 26 mm Number of drilling units: 4 Total number of drilling spindles: 88 Drilling unit 1 Position: Top Vertical drilling spindles: 23 Drilling unit 2 Position: Top Vertical drilling spindles: 23 Drilling unit 3 Position: Bottom Vertical drilling spindles: 12 Drilling unit 4 Position: Bottom Vertical drilling spindles: 20 CNC drilling and dowel insertion machine (Priess BAT-DTW-CNC) Machining process: Drilling and insertion Working area X-axis: 2,500 mm Working area Y-axis: 800 mm Number of working areas: 1 Total number of drilling spindles: 49 Number of drilling units: 4 Drilling unit 1 Position: Top Horizontal drilling spindles in X-direction: 8 Drilling unit 2 Position: Top Horizontal drilling spindles in X-direction: 17 Gkedjzmtpvepfx Ag Tja Drilling unit 3 Position: Top Vertical drilling spindles: 12 Drilling unit 4 Position: Top Vertical drilling spindles: 12 Insertion unit Number of insertion units: 1 Number of injectors: 10 Number of hoppers: 1 Insertion material: Wooden dowels CNC drilling and insertion machine (BMA DLS-CNC) Machining process: Drilling and insertion Working area X-axis: 2,500 mm Working area Y-axis: 800 mm Number of controlled axes: 3 Main electric spindle power: 4.4 kW Number of milling spindles: 3 Number of insertion units: 2 Milling spindle 1 Position: Top Number of controlled axes: 3 Motor power: 4 kW Milling spindle 2 Position: Top Number of controlled axes: 3 Motor power: 4 kW Milling spindle 3 Position: Top Number of controlled axes: 3 Motor power: 4 kW Grooving unit Position: Top Insertion unit 1 Number of injectors: 1 Number of hoppers: 1 Insertion unit 2 Number of injectors: 1 Number of hoppers: 1 Brushing machine Max. working width: 800 mm Max. machining width: 800 mm Max. machining length: 2,500 mm Brush diameter: 160 mm Roller conveyor Max. panel width: 800 mm Max. panel length: 2,500 mm Panel feed: Motorized belt

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, workpiece height (max.): 60 mm, roll diameter: 830 mm, The dismantling is scheduled for calendar week 35. Until then, the buyer can inspect the system while it is in operation in Lithuania. Fully automatic edge banding line with the following machines: HOMAG PROFI KAL330/9/A3/WZ (year of manufacture 2013) HOMAG PROFI KAL370/8/A3/WZ (year of manufacture 2016) HOMAG PROFI TBL100/20/30/F infeed table (year of manufacture 2013) HOMAG POWER TWL410/25/LQ transfer system cross conveyor (year of manufacture 2016) TECHNICAL DETAILS Edge banding machines HOMAG PROFI KAL330/9/A3/WZ & PROFI KAL370/8/A3/WZ Workpiece width without edge, with workpiece thickness of 12–22 mm: min. 60 mm (depending on workpiece length) Workpiece width without edge, with workpiece thickness of 23–60 mm: min. 100 mm (depending on workpiece length) Workpiece overhang: 30 mm Workpiece thickness: 12–60 mm Edge height: max. workpiece thickness + 4 mm Edge material on roll: 0.3–3 mm Edge material height PVC: max. 135 mm Edge material height veneer: max. 100 mm Roll diameter: max. 830 mm HOMAG PROFI TBL100/20/30/F infeed table Roller diameter: 54 mm Roller spacing: approx. 60 mm Panel length: 240–2,500 mm Panel width: 120–3,000 mm HOMAG POWER TWL410/25/LQ transfer system cross conveyor Roller diameter: 64 mm Roller spacing: 110 mm Panel length: 240–2,500 mm Panel width: min. 240 mm Panel thickness: 8–60 mm Panel weight: max. 80 kg EQUIPMENT Gap-free joining-cutting unit on both edge banding machines A3 basic gluing unit on both edge banding machines Gap-free processing units on both edge banding machines FA11 finishing unit on the HOMAG PROFI KAL330 FA21 finishing unit on the HOMAG PROFI KAL370 Fixed stop on the left side of the infeed table Transport rollers on the infeed table Lateral conveyor belt on the infeed table Electropneumatically controlled transverse safety device on the infeed table Manually adjustable infeed safety device Set for small parts Integrated air cushion table Gksdpoztazfefx Ag Tea Fixed stop on the left side at the infeed and outfeed of the transfer system cross conveyor Infeed roller track with conveyor belt and cross conveying Controlled cross conveyor at the infeed Outfeed roller track Controlled cross conveyor at the outfeed Electropneumatically controlled stop protection device Lateral transport belt Manually adjustable panel overhang

Year of construction: 2024, operating hours: 10 h, condition: ready for operation (used), functionality: fully functional, screw conveyor diameter: 145 mm, TECHNICAL DETAILS Extruder type: Single-screw extruder / melt extruder Screw diameter: 145 mm Heating: Induction heating MACHINE DETAILS Drive power: 45 kW Suitable plastics: LDPE, HDPE, PP Suitable materials: Ground material, EPS, film scraps, ground film, and light plastic waste Material feed: Suitable for materials with low bulk density Operating hours: 10 h EQUIPMENT Stuffing device Gksdpfx Agezr Hz Aj Tja Hopper for material feed Large filter / screen changer Adapted die

Condition: used, Used Pfaudler BE5000 vertical glass lined reactor. Approximately 5,000 litre capacity. Internal rated 6.6 bar/full vacuum design pressure at -29 to 200 deg.c. External mild steel jacket rated 6.6 bar/full vacuum design pressure at -29 to 200 deg. Unit has welded dished top and bottom heads. Includes top entry 4-blade CBR Turbine type agitator driven by a 10.5 kw 415 volt 292-1460 rpm 3/50 motor. Unit is mounted on lugs. Gkedpfx Agsykn Rdo Tea

Condition: used, Line 4 Can Filling LIne 130 cans/min capacity 900g can weight 127mm can diameter comprising: Cap UV system with 3 Rittal Heraeus P6062.30S UV lamp units Cap inverter UV tunnel and conveyors Motorised Scoop Hopper with swan-neck conveyor Fully automated scoop sorting line with 2 Aylesbury Automation Euro 630 bowl feeders Isoma empty can rinser/ inverter S/N P160/CRL4. YOM 2016 Jorgensen fully automated depalletizing system Accusort AL5010 4 head Barcode reader with associated conveyor and controls Heraues H4087 Twin Lamp empty can UV tunnel Del Packaging BLE-35 motorised incline conveyor Del Packaging RF-6200 rotary capper feeder with integral UV tunnel Amberflex Spiralveyor SV spiral conveyor (2015) Thermo Scientific Ramsey Versaweigh checkweigher (2018) Domino case labeller with stand Oryx Automation CMWAP50 fully automated case packing machine Mettler Toledo Garvens XS3 automatic checkweigher with reject system and table Accusort AL5010 4 head barcode reader (2007) Del Packaging IPCN401-502 capper with cap detection (1993) Sleever International fully automated sleever Domino D620i twin head laser coding machine CSW Mini Multifeeder wide/54-MMFwide -01 can end feed system (2011) Heraues H4087 twin lamp full can UV tunnel Jorgensen 94302A outfeed can cleaner (2003) Dylog DYXIM D pass through X Ray machine (2015) Del Packaging CLPS scoop docking and over capping machine with scoop in cap detector system Shibuya Hoppmann scoop dropper feed and place system Shibuya Hoppmann Scoop dropper feed and place system with hopper JBT International 16 head rotary filler with 2 Mettler Toledo C Series checkweighers Isoma De-Eevator 01 can De-Elavator (2020) Heraues H4087 4 lamp top and bottom side UV tunnel Terlet 4 chamber vacuum and gassing system (1993) Please note : the following machines have been removed Angelus 56P can seamer (2007) Angelus can seamer Line 4 complete comprising items EU575759 to EU575790 Please note, this lot 30466-348 is offered for sale as a complete line. Its components are simultaneously offered as individual lots 30466-349 to 30466-374 Gjdpfjzl T Sbox Ag Toka Bidders can bid on the complete line and/or on individual lots. Sales are conditional subject to seller approval. It is likely that the seller will approve the highest aggregate bid for the line either as a single lot or as individual lots. Successful bidders will be notified within 2 working days.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, REF: MM6424 1 x AL Tech UK Labelling Technologies Ltd high-performance 'print and apply' label applicator with infeed conveyor and Zebra ZE500 printer. Used to apply labels onto the short and long sides of pre-formed cardboard boxes. Manufacturer - ALTech UK Labelling Technologies Ltd. Model - ALritma S. Date of manufacture – 2020. Controls - 40 x programs, controlled by colour 4.3'' touch-screen. Label width - 20 mm to 107 mm wide. Speed - 50 m/minute. Gkodpsy Uni Nsfx Ag Tja Electrical requirements - 110-230 V / 50-60 hz / 1 phase. Video available on request.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, REF: MM6415 1 x Comcount Packaging Systems bowl feeder and 1 x GIC Gainsborough VFFS bagger with 1 x outfeed conveyor. Model of Comcount bowl feeder - BFWT. Manufacturer - Comcount Ltd. Date of manufacture – 2019. Weighing range - 150g-500g. Gkjdpfxey Hlw Ij Ag Tea GIC Gainsborough Engineering model - VFB2000. Manufacturer - Gainsborough Engineering Ltd Date of manufacture – 2008. Sealing bars - 290mm horizontal & 320mm vertical. Reel width - 620mm. Current film - 280mm. Forming tube - 80mm diameter. Outfeed conveyor - IC350. Belt width - 295mm. Outfeed height - 910mm high. Overall footprint - 4.3m long x 3.45m wide x 3.1m high. Condition – Very good. Only been used 5-6 times in 2.5 years.

Condition: repair required (used), Year of construction: 2003, functionality: limited functionality, REF: MM6413 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Manufacturer - Gainsborough Engineering Ltd Model of VFFS bagger – GV2K1. Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Gkedpsy Hlkbsfx Ag Tja Reel width - 505mm. Current film - 230mm. Sorting / infeed table - 1500mm long x 710mm wide. Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Condition – Not operational, out of action 3-4 months.

Condition: excellent (used), Year of construction: 2018, 1 x Zumex Food Engineering juice extraction and flitration system with elevator and squeezing kits. Manufactured completely in stainless steel. Technical specification ⚙️: ✅ Manufacturer - Zumex Food Engineering ✅ Model - Z450. ✅ Date of manufacture - 2018. ✅ Hopper capacity - 40 kg.  Performance Specification ⚙️: ✅ Sizes 9-10-11: Heat unit - Kit 9, Oranges/minute - 150.35, Output capacity - 902.4 kg/h, Litres/minute - 6.01 L/min, Litres/hour - 360.84 L/hr. Gedpfxot Uircj Ag Tjka ✅ Sizes 5-6-7-8: Heat unit - Kit 8, Oranges/minute - 133.68, Output capacity - 1145.4 kg/h, Litres/minute - 7.64 L/min, Litres/hour - 458.22 L/hr. ✅ Sizes 2-3-4: Heat unit - Kit 7, Oranges/minute - 116.94, Output capacity - 2338.8 kg/h, Litres/minute - 15.59 L/min, Litres/hour - 935.53 L/hr. PLEASE NOTE - Estimated calculations with a 40% juice performance of the oranges. FRUIT DIAMETER: Minimum:Ø55mm, Maximum:Ø100mm NET/GROSS:  750/960KG DIMENSIONS (L x W x H):  2.5 x 1 x 2.2m CONSUMPTION:  2.010W VOLTAGE: 380 V / 50-60 Hz / 3 phase.

Condition: used, KRONES ROUND GLASS LINE 500/600BPM 700ml, 750ml, 1 Litre Gkjdpozrf A Eefx Ag Toa STORK MINIATURE LINE 200 BPM 50ml Glass & PET BERTOLASO LINE 200BPM 200ml, 300ml, 375ml, 500ml Glass & PET STORK GLASS LINE 200BPM 350ml, 700ml, 750ml, 1.14 Litre