Used Cake Display Cabinet for sale (11,999)

Condition: used, Injection molding machine ARBURG, Type Allrounder 320 C 600-100 Serial No. 189356, Year of manufacture 09/2002 Clamping force 60 tons Screw diameter 25 mm Ljdpfezqglrjx Ac Asrt Dosing volume max. 49 cm3 Injection pressure max. 1570 bar Opening stroke - platen stroke max. 350 mm Platen dimensions 446 x 446 mm Tie bar spacing 320 x 320 mm Mold height min.: 200 mm Platen spacing min.: 200 mm Platen spacing max.: 550 mm Centering of fixed and moving platens 125 mm Heater power 4.9 kW Motor power hydraulic pump 15 kW Mains connection 400 Volt, 50 Hz, 19.9 kW - Machine control SELOGICA - Two controllable hydraulic circuits for core pullers - Injection unit with COLORTRONIC material hopper for automated granule feed - U-version interface - HHG interface - Control ARBURG MULTRONICA with foil keypad and integrated display - 88790 operating hours recorded (power-on hours) - 44925 operating hours of the hydraulic pump (hydraulic on) - Control cabinet fixed to the machine - Work area protective doors at the front and rear, manually sliding with safety switches - Mobile control panel with function keys, mounted on the back of the machine Space requirement L x W 3650 x 1700 mm Height with material hopper 2200 mm Weight 3000 kg Good condition

Condition: used, Werth Type: Werth SCOPE-CHECK 400 3D coordinate measuring machine Technical data: Measuring capacity (X x Y x Z): 400 x 200 x 200 [mm] Work table with integrated electrical cabinet: 1600 x 950 x 780 [mm] Max. weight on table: 20 [kg] Operating conditions: * Relative humidity: 40 - 70 [%] * Temperature: 10 - 40 [°C] Measuring precision (20°C, 8 kg, magnification 5X, resolution 0.5 microns) On table, E1 = 1.8 + L/120; E2 = 2.0 + L/150 All positions, E1 = 2.5 + L/120; E2 = 2.9 + L/100; E3 = 4.5 + L/75 Incremental scales Ball screw drive with servo motor Optical magnification (video): 0.5X to 5X Optical field (video): 13 x 10 [mm] to 1.3 x 1 [mm] Movement on linear guide with ball bearing Combinable lighting: diascopic, episcopic, ring-shaped LED/axial Voltage: 230 [V] Frequency: 50 [Hz] Power: 2 [kW] Weight: 300 [kg] Accessories CN Lighting control via software Lrsdpfx Acszh Dq Ho Ast Video sensor IP for detection of measuring contour (screen display) Electronic control for table movement Manual control for table via joystick Predisposition for mechanical probe Calibration, 3D measurement, probe communication software Software: WinWerth v8.40 Scope of delivery: (Werth coordinate measuring machine with accessories as shown) Condition: used (Changes and errors in the technical data are subject to change!) Please inquire about transport options before purchase. We will be happy to answer any further questions you may have by telephone.

Condition: used, Name: Filter press used Manufacturer: Netzsch Type: 800/80 Year built: 1998 Plate size: 800 x 800 mm Number plates: 81 Press content: Approx. 1.200 liters Filter area: Approx. 88 m2 Filter pressure: 15 bar Cake thickness: 30 mm Cycle: Closed Plate transport: Manually Lodpfx Aszy Hyuoc Aort Plate material: Polypropylene Construction form: Side beam press Filter cloth washer: Yes Filter cloths: No Empty weight: Approx. 7.000 kg Technical doc.: Yes Accessories: A control cabinet, a hydraulic system, a light curtain, a filter cloth washing system, a high-pressure pump Condition: Second hand Price: By request

Condition: used, Name: Used chamber filter press Manufacturer: Diefenbach Type: FP DE800-90 Year built: 1997 Plate size: 800 x 800 mm Number plates: 90 Press content: approximately 1350 liters Filter area: Approx. 99 m2 Filter pressure: 15 bar Cake thickness: 30 mm Lredpfxjzy H Dge Ac Ajt Cycle: Closed Plate transport: Automatically Plate material: Polypropylene Construction form: Bridge beam press Filter cloth washer: No Filter cloths: No Dimensions: L 8500 x W 1300 x H 2100 mm Empty weight: approx. 8000 kg Technical doc.: Yes Accessories: A control cabinet, a hydraulic system, a light barrier Condition: Second hand Price: By request

Condition: refurbished (used), functionality: fully functional, Year of construction: 2023, input voltage: 400 V, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, Manufacturer: Rausch (Haan/ Rhld) Model: RS 4/1000 Machine No.: 5027 Year of manufacture: 2001/2023 Weight: 580 kg Overhauled: 3/2023 by Wiemers AG General / Technical Data: Unused, overhauled mechanical vertical broaching machine Rausch RS 4, with current “CE” certification Pulling force: 40 kN (4,000 kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table dimensions / Working area: 540 x 340 mm / 450 x 250 mm Table opening: Ø 90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,350 mm x 900 mm x 1,000 mm (with splash-guard cabin) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Lrsdsw H Dgnspfx Ac Ast Accessories / Special equipment: - Drive with 2 speeds - Safety door with interlock and chip chute - Chip chute with tool storage - Electric clamp jaw sensing (tool removal monitoring to prevent unintentional retraction of the drawbridge) - Integrated coolant system with solenoid valve (controlled via swing system) - Patented coolant/lubricant swiveling system - Externally adjustable tool length setting system (reproducible across multiple machines) - 4 central lubrication points for the trapezoidal spindle drive - Closed centering plate for profile tools with additional protection plate for flat broaching tools (keyway tools) - 3-sided enclosed splash guard cabin with tool storage (ideal for profile broaching) - External control panel (connected via Harting plug connector) Remarks: The machine has been completely overhauled, the machine body thoroughly reconditioned. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made from cast, wear-resistant bronze - All bearings and seals replaced The coolant system (pump, check valve, and drain valve) including coolant/lubricant swing system is new - Coolant supply is controlled via a solenoid valve, which can be switched over by the swing system - The drawbridge as well as the clamping jaws and rack segments are new - A deactivatable clamping jaw detection system has been installed (additional safety for operator & to prevent tool breakage) - A safety door with interlock, signal display, and door lock - The tool length adjustment system has been relocated outside the machine compartment - Additional end-position limit switches have been installed - Complete new electrical system (control cabinet) - No PLC installed, machine is electrically maintenance-friendly - New drive motor (SEW Germany) with brake - The machine has been freshly painted with 2-component structural paint General The dual spindle drive ensures smooth, centralized pulling force and consistent broaching speed (broaching speed selectable: 3 m/min or 6 m/min). By design, the machine is quick and simple to set up for broaching with flat broaching tools for keyway cutting. Thanks to the universally constructed design of the drawbridge and machine table, operation with both profile and flat broaching tools is possible without the need for additional drawheads.

Condition: used, Year of construction: 2017, functionality: fully functional, We are offering this used HEESEMANN UKP 20 edge sanding machine, year of manufacture 2017. Manufacturer: HEESEMANN Model: UKP 20 Year: 2017 Condition: used If you have any further questions or require more information, please do not hesitate to send us a message or give us a call. If needed, the order confirmation with all technical details can be sent. 1 workpiece transport system – total length 5,015 mm – driven by a 1.5 kW three-phase motor, with double chain for workpiece transport Feed speed adjustable from 5 to 25 m/min, frequency-controlled, working height constant at 880 mm, including integrated control cabinets; Including adjustable stop ruler with digital readout and including counter fence with central width adjustment with central height-adjustable and laterally adjustable top pressure bar with digital display, which presses plate-shaped workpieces with ball-bearing rubber rollers (roller pitch 38 mm), including support rollers to extend the support for large workpieces, extendable sideways by approx. 1,500 mm. 4 side guide rollers between the sanding units for secure transport of strips 1 Industrial PC 3.0/4" Ledpfsy A D Ecex Ac Aort LCD-TFT color display, 800 x 600 pixel resolution CF card 1GB Operating system: Windows Embedded Standard Touch-screen version with display for production and downtime periods. Ethernet connection available. 2 belt sanding units "M 4" – positions 1 and 2 for sanding straight edges, with intermittent belt blow-off device, belt break detector, tool holder with quick-change device, base plate for sanding tool, prepared for electronic path control for automatic engagement and disengagement of the sanding tool, operating in both climb and counter rotation. Belt dimensions: 2,300 x 80 mm Belt speed: 0/7–12 m/s Motor rating: 3.0 kW with electronic frequency control for stepless adjustment of the belt speed. Electronic sanding pressure control from the terminal. 2 oscillation devices (positions 1 + 2) For optimal belt utilization 2 belt sanding units "K 4" – positions 3 and 4 incl. stand, for sanding small profile sections, also suitable for edge rounding; can be swiveled 90° upwards and 45° downwards, belt break detector, tool holder with quick-change device, base plate for sanding tool, intermittent belt blow-off device, prepared for electronic path control for automatic engagement and disengagement of the pressure tool, including climb and counter rotation, designed for manual adjustment and digital indicators for the adjustment axes. Belt dimensions: 2,000 x 50 mm Belt speed: 0.5–8 m/s Motor rating: 1.1 kW with electronic frequency control for stepless adjustment of the belt speed. Electronic sanding pressure control from the terminal. 4 electronic path controls for fully automatic, timed engagement and disengagement of the sanding tool depending on the set feed speed, sanding pressure, and angle position of the units. 2 steel tools for straight edges, equipped for air cushion sanding, incl. base plate, for 1 "M4" unit, item no. 9000191310 2 steel profile tools equipped for air cushion sanding, incl. base plate, for 1 "K4" unit, item no. 20000025684

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: GSEM2302014, overall weight: 4,900 kg, fuel type: diesel, tank capacity: 910 l, color: grey, output current: 630 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power (apparent): 481 kVA, continuous power (apparent): 350 kVA, total length: 4,300 mm, total width: 1,500 mm, total height: 2,300 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: YUCHAI, type of cooling: water, Equipment: CE marking, type plate available, REM Power GSEm 350000 SDEW is a high-performance industrial diesel generator designed for professional use in environments where reliable power supply is crucial. This model offers a rated output of 350 kW, maximum output of 385 kW, rated current of 630 A, and operates at 400 V, 50 Hz. It is equipped with a 6-cylinder engine, water cooling, AVR system for automatic voltage regulation, digital display for voltage, frequency, and operating hours, as well as electric start with included battery. The built-in ATS (Automatic Transfer Switch) function ensures automatic generator start-up in case of power failure, with additional protection provided by a low oil pressure alarm. The large steel fuel tank with a capacity of 910 liters enables up to 13.5 hours of continuous operation. The generator features a 3-phase direct connection, dimensions of 4300 × 1500 × 2300 mm, and a total weight of 4900 kg, making it suitable for demanding commercial and industrial applications. ATS cabinet included. For sale: a professional diesel generator REM Power GSEm 350000 SDEW. The unit delivers a rated output of 350 kW and maximum output of 385 kW, operates at 400 V / 50 Hz, and achieves a rated current of 630 A. It is equipped with a 6-cylinder engine, water cooling, AVR voltage regulation, digital displays for voltage, frequency, and operating hours, electric start with included battery, and ATS function for automatic start-up in case of a mains power outage. The generator also features 3-phase direct connection. Lsdpfx Asy Au Rijc Ajrt It comes with an integrated 910 L steel fuel tank, providing up to 13.5 hours of continuous operation. The overall dimensions are 4300 × 1500 × 2300 mm, with a total weight of 4900 kg. Manufacturer’s article number: 39350000502. Technical Data: Manufacturer: REM Power Model: GSEm 350000 SDEW Rated power: 350 kW Max power: 385 kW Rated current: 630 A Voltage: 400 V Frequency: 50 Hz Engine displacement: 16,350 cc Fuel: Diesel Tank capacity: 910 L Continuous operation: 13.5 h Dimensions: 4300 × 1500 × 2300 mm Weight: 4900 kg

Condition: like new (used), Year of construction: 2019, Krauss Maffei KM 2300-12000 MX Injection Moulding Machine Year of manufacture: 2019 🏭 Manufacturer: Krauss Maffei Lsdpfewxdrbjx Ac Asrt Machine type: KM 2300-12000 MX Clamping system: fully hydraulic Control: MC5 – industrial computer with integrated 19” colour touchscreen display 🔧 Clamping unit Clamping force: 23,000 kN Maximum mould opening force: 1,610 kN Platen dimensions (W × H): 2,850 × 2,450 mm Tie bar clearance (W × H): 2,020 × 1,620 mm Opening stroke: 3,000 mm Mould height (min.–max.): 800 – 1,800 mm Maximum daylight: 3,800 mm Ejector stroke: 400 mm Ejector force: 400 / 200 kN 🧩 Injection unit Screw diameter: 105 mm Injection pressure: 2,296 bar Shot volume: 5,195 cm³ Shot weight (PS): 3,689 g Screw speed (standard): 103 rpm Plasticising rate (PS): 241 g/s Nozzle radius: 28 mm Nozzle orifice: 8 mm ⚡ Electro-hydraulic equipment Pump motor power: 132 kW Heater power: 93 kW Number of cylinder heating zones: 7 Dry cycle time (Euromap 6): 8.2 s Oil tank capacity: 2,440 l 📐 Dimensions and weight Net weight with control cabinet: 121 t Machine dimensions (L × W × H): 14.42 × 4.39 × 3.44 m

Condition: new, Year of construction: 2024, functionality: fully functional, PRO RICHYOUNG cycle-controlled lathe Model: RIC-TC1840N Serial No.: T0123100074 Year of Manufacture: 03/2024 in the following configuration: - CNC control system SIEMENS 828D-SL SHOP TURN - 10.4" LCD color display - Control panel, swiveling 45° - PRAGATI 8-position tool turret VDI30 Lrsdpfx Ajzzcygjc Aot - Enclosed work area (CE) with electric locking, full enclosure with viewing windows - Chip tray on rollers, extendable to the front - Automatic central lubrication of the slides - Ball screw in X and Z axes - 3-color status indicator light - Work area lighting - Coolant system - Heat exchanger for the control cabinet - Set of operating tools - Technical documentation - CE version - Colors: * RAL 9016 – Traffic white * RAL 9023 – Pearl dark gray Technical data: Center height: 230 mm Distance between centers: 900 mm Swinging diameter over bed: 460 mm Swinging diameter over cross slide: 230 mm Z-axis travel with 8-position turret: 875 mm Bed width: 300 mm Headstock: Main spindle bore: 58 mm Spindle mounting: ISO / No. / DIN: 702-1 / 6 / 55026 A1-6 Spindle speed: 0 – 4,500 rpm Recommended chuck diameter: 200 mm Feeds: Feed rate X-axis: 0 – 5,000 mm/min Feed rate Z-axis: 0 – 7,000 mm/min Rapid traverse Z-axis: 5 m/min Rapid traverse X-axis: 7 m/min Positional accuracy (X/Z): +/- 0.005 mm Repeat accuracy (X/Z): +/- 0.005 mm Diameter of ball screw X-axis: 25 mm Diameter of ball screw Z-axis: 40 mm Travel: X-axis: 250 mm Z-axis: 875 mm Tailstock: Quill diameter: 58 mm Quill travel: 150 mm Morse taper in quill: MK 4 Max. workpiece weight: Chuck and tailstock: 175 kg Chuck, steady rest, and tailstock: 261 kg Drives: Power of spindle motor S1 – 100%: 11 kW Power of spindle motor S6 – 40%: 17.5 kW Cooling system: Capacity: 47 liters Pressure of coolant pump: 5 bar Flow rate at 5 bar: 33 liters/min Power of coolant pump: 1.0 kW Dimensions: Length: 2,680 mm Depth: 1,480 mm Height: 1,880 mm Weight approx.: 2,400 kg

Condition: used, Year of construction: 2002, functionality: fully functional, Machine Data • Gantry-type machine with fixed table and moving portal for minimal footprint • Base frame, bridge, and bridge uprights made from welded, stress-relieved, and machined steel in one piece • Main machine assemblies consist of ribbed welded constructions engineered for optimal stiffness-to-weight ratio, vibration damping, and high acceleration • Each machine design is verified and optimized using finite element analysis (FEA) to ensure maximum quality, performance, and safety • Easily accessible machine table for straightforward loading and unloading via forklift or overhead crane Lsdpfxsx E Tmbe Ac Aort • Ground precision linear guides with high pre-load and additional cover tape for optimal chip removal on all axes • Brushless digital A/C servo motors and controllers on all axes • Dual-side synchronised drive on the X-axis (gantry drive) • Rack-and-pinion drive on the X and Y axes • Precision ball screw drives with dual-end bearing units on the Z axis • Precision planetary gearboxes with low backlash • Enclosed cable drag chains protect the drag chain cabling against chips and dust • High-quality shielded drag chain cables offer maximum protection against interference and failures • X-axis travel: 3,120 mm • Y-axis travel: 2,190 mm • Z-axis clearance: 200 mm • Z-axis stroke: 280 mm • Network connectivity via Ethernet • Remote service via Internet Panel-Based CNC Control System • Touchscreen display • Multifunction keyboard with integrated touchpad • Integrated industrial PC with Windows 7 Professional, hard drive, and Ethernet • Comprehensive remote maintenance functionalities • Includes hand-held unit with electronic handwheel • MCP with rotary switch for feed and spindle override • Mobile control cabinet Hand-held Operating Device • Fast, increment-precise positioning • Handwheel with magnetic detent • Coarse, medium, and fine positioning • 2-channel emergency stop • Protection class IP65 Milling Spindle • Max. spindle power: 4 kW • Max. speed: 30,000 rpm • ISO-25 tool taper • Max. tool diameter (shank): 12 mm • Air-cooled • Pneumatic tool taper clamping • Dry, clean, oil-free compressed air required on customer side (< 0.1 μm, < 7 bar) Automatic Tool Changer / Linear • Linear tool magazine mounted outside the working area • Basic configuration: 4 slots • Up to 20 slots ISO-25 Extraction Unit for Automatic Tool Change • Hose connection diameter: 110 mm • Automatic up/down function for tool change Tool Length Sensor • Automatic tool length measurement via M command • Hard metal contact plate • Measuring accuracy: 0.001 mm • Contact force: 1.5 N Tool Length Sensor • Automatic tool length measurement via M command • Hard metal contact plate • Sensor mounted outside the working area 2x Side Channel Blowers • Max. power consumption: 7.5 kW • Maximum airflow: 650 m³/h • Rated voltage: 400 V • Rated current: 14 A • Pressure: 39,500 Pa

Condition: used, Year of construction: 2018, Technical details: x-travel: 711 mm y-travel: 406 mm z-travel: 394 mm distance spindle nose and table: 546 - 152 mm table-size: 864 x 381 mm table load: 226 kg turning speeds: 15000 1/min power capacity: 11,2 kW max. torque on the spindle: 62 Nm spindle taper: SK 40 Tool changer: 18+1 rapid travel x/y/z: 61 m/min feed: 30,5 m/min max. tool weight: 5,4 kg max. tool length: 178 mm diameter of tools max.: 64 mm Tool change time tool/tool, milling spindle: 1,75 s internal coolant system feed: 21 bar Lrodpfxezxz Hgj Ac Ajt weight of the machine ca.: 2427 kg dimensions of the machine ca.: 2,8 x 2,4 m Vertical 3-axis machining center POS mill 1100, from year 2009 in good condition. Accessories: - Chip conveyor Knoll - additional coolant filtersystem - Programmable coolan jet - automatic Coolant refillsystem - Airpressure through tool - Measuring probe system WIPS - Synchronized treading - Haas Connect remote control - Media Display - Cooling of electrical cabinet - fixtures and tools will not be sold. *

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, laser power: 6,000 W, CNC Laser Cutting System TruLaser 3040 Fiber (L81) 6000 Watt X Working area max.: 4000 mm Y Working area max.: 2000 mm Z Working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 6000 Watt Operating hours: 18581 hrs. Laser beam on: 13125 hrs. Sheet metal thickness steel max.: 25 mm Sheet metal thickness stainless steel max.: 25 mm Sheet metal thickness aluminum max.: 25 mm Sheet metal thickness copper max.: 10 mm Standard Equipment Machine: Working area: 3000 x 1500 mm Closed machine frame Cooling unit for machine and laser (water-air) Longitudinal conveyor Motion unit for highly precise machining Work area lighting Position laser diode Spray device Automatic nozzle cleaning Gantry drive in combination with linear direct drives Integrated control cabinets Integrated cabinet Closed beam guidance via laser light cable (LLK) Machine status indicator Machine ambient temperature 5 to 35 °C Laser: Excitation via pump diodes Laser power control Cutting head: 1-cutting head strategy Universal cutting head with adaptive lens system Protective glass Online condition monitoring of the protective glass Control system: Fast reproduction Control system SINUMERIK 840D SL Ergonomic control panel with 21.5″ wide-screen multi-touch color display Integrated technology data Copper cutting package • Cutting data O2 and N2 Brass cutting package • Cutting data N2 Automatic shutdown Programmable cutting gas / pressure selection Microweld Remote support interface Multi-sheet processing (• Not possible in combination with automation) Condition Guide Functions: AdjustLine ControlLine FastLine FlyLine NitroLine PierceLine (• Additionally available from TruDisk 6001: Regulation and monitoring of the piercing process) FocusLine Data transmission: USB interface RJ-45 network interface Central Link Online Update Manager • Automatic download of updates via remote support connection Lrsdpjzln Udofx Ac Ast • Installation of the updates when the machine is switched on or by the customer or by TRUMPF service • To use, the Online Update Manager must be activated; deactivation is possible at any time by the customer. Safety: CE marking Light curtains Multi-chamber extraction system Machine enclosure with certified viewing pane, door on the right Extended Standard Equipment: Compact dust collector Sliding roof Automatic pallet changer in the longitudinal direction Support rails made of structural steel External solid-state laser TruDisk 3001 with 1 LLK output Power supply for TruDisk via the machine - External solid-state laser TruDisk 6001 - BrightLine fiber - Nozzle changer - Copper cutting package - Brass cutting package - Mobile Control App - Viewing pane, door on the left - HighSpeed Eco - RCI interface - CoolLine - DetectLine

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, DIOSNA V50 – UNIVERSAL MIXER GRANULATOR / PHARMACEUTICAL GRANULATOR For sale: DIOSNA V50 Universal Mixer Granulator in exceptionally good used condition. The machine is manufactured with high-quality stainless-steel components and is equipped with a bottom-mounted three-blade mixing tool and a high-speed side chopper. The product-contact area, and especially the interior of the processing vessel, is in outstanding condition. The vessel, mixing tools, and stainless-steel surfaces are exceptionally clean and show very little sign of wear. TECHNICAL DATA Manufacturer: DIOSNA Dierks & Söhne GmbH, Germany Model: V50 Machine No.: 383-001 Year of manufacture: 2007 Usable bowl capacity: 46 liters Electrical supply: 400 V / 50 Hz Rated power: 6.5 kW Rated current: 15 A CE marked Ex / ATEX marking according to machine nameplate MIXING / GRANULATION SYSTEM Ljdpfxszxq U He Ac Ajrt The DIOSNA V50 combines intensive mixing and granulation in one compact processing machine. The processing vessel is equipped with: - Three-blade bottom mixing / granulating tool - High-speed side chopper - Stainless-steel processing vessel - Large side discharge system - Hinged stainless-steel vessel lid - Inspection window in vessel lid The combination of the bottom mixing tool and side chopper provides intensive product circulation and is suitable for mixing, granulating, agglomerating, and breaking down oversized product particles. CONTROL & EQUIPMENT - Siemens SIMATIC Touch Panel - Integrated stainless-steel control cabinet - Emergency stop - Key-operated control switch - Additional process control/display unit - Clean-air connections/control - Nitrogen connections/control - Mobile design on castors - Stainless-steel construction - Additional filter elements / accessories as shown in the photographs APPLICATIONS Suitable for applications including: - Mixing and homogenization of powders - Wet granulation - Agglomeration - Preparation of pharmaceutical granules - Breaking down oversized agglomerates - Pharmaceutical and chemical processing - Pilot and small production batches CONDITION Exceptionally good used condition. The interior of the processing vessel is remarkably clean and appears to have seen very little use. The mixing tool, chopper, and product-contact surfaces are also in excellent condition. The photographs show the actual machine offered for sale. INSPECTION Inspection and demonstration by appointment at our premises in: 4226 Breitenbach Switzerland Worldwide delivery can be arranged. Further technical information and additional photographs are available on request. CYCRON GmbH Switzerland Subject to prior sale and errors.

Condition: used, Year of construction: 2017, - 4 belt grinding units - Frequency control for all units - Electronic grinding pressure control Universal edge and profile grinding machine Manufacturer: Heesemann Type: UKP 20 Year of manufacture: 2017 Technical data Workpiece transport system - Total length: 5015 mm - Driven by a 1.5 kW three-phase motor with a double chain for workpiece transport - Feed rate in the range of 5-25 m/min, frequency-controlled - Working height constant at 880 mm - incl. integrated control cabinets - incl. adjustable guide rail with digital display and incl. counter rail with central width adjustment 4 lateral guide rollers between the grinding units for secure transport of workpieces Industrial PC 10.4" - LCD-TFT color display - Touch screen version - with display for production and downtime - with program memory for 100 programs 2 belt grinding units "M 4" Pos. 1 and 2 - for grinding straight edges - Belt dimensions: 2300x80 mm - Belt speed: 0.7-12 m/s - Motor power: 3.0 kW - with electronic frequency control for stepless control of the belt speed - Electronic grinding pressure control from the terminal Lrodozuzb Aspfx Ac Ajt 2 oscillation units for "M4" (Pos. 1+2) For complete utilization of the grinding belt 2 belt grinding units "K 4" Pos. 3 and 4 - for grinding small profile sections - can also be used for edge breaking - Can be swiveled 90 degrees upwards and 45 degrees downwards - Belt tear switch - Tool holder with quick-change device - Intermittent belt extraction device - Belt dimension: 2000x50 mm - Belt speed: 0.5-8 m/s - Motor power: 1.1 kW - with electronic frequency control for stepless control of the belt speed - Electronic grinding pressure control from the terminal 4 electronic control units - for the fully automatic timing of the lowering and raising of the grinding tool, depending on the set feed rate, the grinding pressure and the unit angle setting Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: UWIA/1058/90, SAACKE Universal Tool Grinding Machine UW IA – Year of Manufacture 1990 MANUFACTURER & MODEL - Manufacturer: Gebr. SAACKE GmbH & Co. KG, Pforzheim (est. 1932) - Model: UW IA (Universal Tool Grinding Machine) - Serial Number: UWIA/1058/90 - Year of manufacture: 1990 - Electrical diagram no.: UWIA-0-161A CONDITION Very good, well-maintained overall condition. Fully functional, tested and ready for operation. Shows normal signs of use. DIGITAL DISPLAY - Heidenhain VRZ 710 (2-axis position display) - Program 212 994 04, ID no. 229 328 01 - Made in West Germany GRINDING SPINDLE DRIVE DATA - Motor type KK 5 S (3~) - 0.37 kW, 2800 rpm - 220/380 V, 1.85/1.07 A - Spindle speeds: 2100 / 3000 / 4200 / 6000 rpm (4-step) WORKPIECE SPINDLE DRIVE DATA - Georgii-Kobold motor KDD 648 P1/FW (3~) - 0.70 / 0.85 kW, 1400 / 2800 rpm - 380 V, 1.8 / 2.2 A, IP 54, tropical insulation - Made in West Germany ELECTRICAL DATA (GENERAL) - Operating voltage: 380 V (3-phase, 50 Hz) - Control voltage via transformer: 220 V - Lighting voltage: 220 V - Rated power: 1.3 kW - Rated current of the machine: 2.8 A - Circuit protection rated current: 10 A EQUIPMENT & FEATURES - Swiveling worktable ±90° - Tailstock - Workpiece spindle with separate drive - Grinding spindle head with 4 speeds - Heidenhain VRZ 710 digital display (2 axes) - Tool cabinet including approx. 15 CBN grinding wheels Ljdsy Er Ahspfx Ac Aert - Machine is mobile on 4 castors APPLICATION Classic universal tool grinding machine for grinding turning and milling tools, drills, reamers, profile tools, as well as round and flat profiles. Ideal for grinding shops, tool making, and maintenance. LOCATION & TRANSPORT Location: Central warehouse, Köck Auction House, 6178 Unterperfuss, Austria. Collection in person or freight shipping by arrangement. Transport costs on request (depending on delivery address). All information without guarantee. Subject to errors and misprints.

Condition: used, Year of construction: 2026, Special price – demonstration machine, Garbsen. Our WL 6 machine concept. The Weima high-performance shredder, with its flexible application options, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into wood chips, achieving a significant volume reduction of the material, especially with bulky materials. Mode of operation: The machine is equipped with a large feed hopper and can be loaded via a conveyor belt or manually. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without requiring manual assistance. The hydraulically controlled slide feeds the wood waste to be shredded to the cutting area of the rotor and is automatically and load-dependent controlled. The internal slide guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are cardanically suspended to avoid transverse forces on the piston seals. The patented and profiled V-rotor, made of solid steel, has a diameter of 252 mm and operates with a rotor speed of 80 - 120 rpm. The concave, aggressive, and four-way rotatable knives/cutting crowns are located in milled knife pockets on special knife carriers. This patented system guarantees, through the resulting reduction in the cutting gap between the counter-knife and the rotor, a high throughput, low energy consumption, and an optimal discharge of the shredded material. The screen located under the rotor determines the chip size (10 - 100 mm). An optionally available, hydraulically opening screen basket is also available. The power transmission from the electric motors is via V-belts to a heavily dimensioned gearbox, which is attached to the rotor shaft on one side. Precise cutting at high throughput with a profiled V-rotor. The V-rotor, developed specifically by WEIMA, is universally applicable and made of solid material. Its aggressive material feed, with up to two knife rows, guarantees a high throughput with low power consumption. It can be equipped with hardened cutting knives made of steel with edge lengths of 30 mm and 40 mm. These can be repeatedly rotated when worn, which drastically reduces maintenance costs. Intuitive operation thanks to a Siemens PLC control with a touch display. To ensure that the electronics are optimally matched to the machine, we design, build, and wire our control cabinets ourselves. In doing so, we use only high-quality components – for example, from Siemens or Rittal. Intuitively operable touch screens guarantee quick adjustments. Functions such as adjusting the slide timing or stop ensure a high throughput. The built-in overload protection also prevents damage to the machine. Technical specifications WL 6: Feed opening 800 x 1,250 mm. Hopper capacity 0.9 m³. Rotor length 800 mm. Rotor diameter 256 mm. Drive power 22 kW. Rotor speed 90 rpm. Max. number of knives 42 pieces. Type and size of knives: concave / 40 x 40 mm, cutting crowns. Screen size 10-60 mm. Paint: WEIMA standard RAL 2022 / 7016. Connection value 400 V +/- 5% / 50 Hz. Weight approx. 1,600 kg. Including: - Control cabinet* (Rittal) incl. electrical control (Moeller / Siemens) and S Ljdpsy D E Tdefx Ac Aort

Condition: excellent (used), functionality: fully functional, Schaublin 135 High-Precision Lathe with 3-Axis K&C Digital Readout NEW and Accessory Cabinet in Excellent Ex-University Condition! Technical Data: >> Centre height: 135 mm >> Distance between centres: 630 mm >> Swing over bed: 315 mm >> Spindle mount: Camlock D1-4 >> Spindle bore: 40 mm >> Longitudinal and cross feeds: 0.025–0.35 mm/rev >> Metric thread pitches: 0.25–14 mm >> Tailstock: MT3 >> Infinitely variable speed range: 55–3000 rpm Lodpfsx H Szyjx Ac Ajrt >> Total power requirement: 4.45 kW >> Weight: approx. 1200 kg Accessories: >> 3-axis digital readout by K&C (new), 12 months manufacturer’s warranty with user manual Functions: Switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction reversal >> Accessory cabinet containing: - 160 mm 3-jaw chuck with two sets of jaws - Multifix B toolholder with 3 pockets - Internal and external collets with quick-change system - Change gears - 4-jaw chuck - Face plate - Fixed and travelling steady rests - Coolant system - Centres - Operating manual - And much more About the machine: For sale is a Schaublin 135 high-precision lathe. The machine is in excellent condition, coming from a university and only lightly used. Equipped with a NEW K&C 3-axis digital readout and a comprehensive range of accessories. You are invited to inspect the machine under power on site to verify its condition.

Condition: used, mileage: 242,466 km, power: 120 kW (163.15 HP), first registration: 05/2015, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: automatic, emission class: euro5, number of seats: 2, total length: 6,450 mm, total width: 2,080 mm, total height: 2,900 mm, Year of construction: 2015, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: 1 DIN slot in the front under the headliner, airbag on the passenger side, hill start assist, exhaust pipe in front of the rear axle on the left, exterior mirrors without integrated turn signal, outside temperature display, battery 100 Ah, additional battery (reinforced), 1-pole battery disconnect switch, turn signals at the front on the side, roof control unit with reading light on driver/passenger side, entry lights, additional main key, folding cover for storage compartment, configurable special module, spare wheel with Super-Single tire (235/65 R16), spare wheel holder under the end of the frame including jack, interior rearview mirror, rear wall with window, mud flaps at the front, seats in the cab: passenger seat comfort, seats in the cab: driver's seat comfort, reinforced rear stabilizer, reinforced front stabilizer, fuel gauge for auxiliary heater, separating relay with additional battery, rear wall lining, thermal insulation of the driver's cab, heat-protective glazing (windshield with band filter at the top), auxiliary heater (air) electric Additional equipment: Adaptive brake light, airbag on the driver side, indicator for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both sides, brake assistant, braking system with ABS+ASR, headliner in the cab, lockable glove compartment, body/superstructure: standard platform, fuel tank: main tank 75 liters, headlight range adjustment, truck approval, engine 2.1 liters - 120 kW CDI CAT, wheelbase 3665 mm, smoker's package, low emissions according to Euro 5 emission standard, safety belt system with warning system (driver side), seat cover/upholstery: fabric Lima, maintenance interval indicator Assyst, permissible total weight 5.00 t, dual tires on 2nd axle / rear axle * 1st owner * Rear axle with air suspension * Ambulance and rescue vehicle with box body * Superstructure from WAS * Adjustable floating table * Stretcher frame * Light carrying chair * Central locking for patient compartment * KONVEKTA air conditioning * 1 attendant seat * Refrigerator compartment * Warming cabinet * Sink * Medicine cabinets * Oxygen and suction system pre-installed * 12 + 230 Volt sockets * Skylight * External storage compartments Lodsz A Ncbjpfx Ac Aort * Rear wing doors with step * Side door with sliding window and step * All-round work lights * Partition with sliding window * Ambient lighting left, right and rear * 2x interior lighting, bright white and blue * Cab with 2 seats * 2x air conditioning at the front and rear * Automatic transmission * Telma retarder * Electric windows * electrically adjustable and heated mirrors * Searchlight * Daytime running lights * Driver and passenger airbags * ABS and ASR * Dual-tired rear axle * Extra pneumatically extendable step at the rear * Superstructure dimensions: L=3.650 x W=1.900 x H=1.980 mm * Wheelbase: 3.650 mm * Permissible total weight: 5,000 kg * Unladen weight: 4,415 kg Proper all-season tires from Conti, DOT 2024, at the front with approximately 6.0 mm and at the rear with approximately 4.0 mm tread depth Engine, automatic transmission, and rear axle are dry The engine runs smoothly, and the automatic transmission shifts cleanly Starter battery is new +++ Errors, changes and prior sale reserved

Condition: excellent (used), Year of construction: 2017, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: 17434268, type of input current: three-phase, input voltage: 400 V, electrical fuse: 63 A, input current: 61 A, input frequency: 50 Hz, pressure: 18 bar, stack height: 1,900 mm, total length: 1,600 mm, total width: 750 mm, tank capacity: 410 l, empty load weight: 315 kg, type of cooling: water, Machine Description and Technical Data 2.1 Machine Description The RED COMPACT units are delivered fully pre-assembled and require only electrical connection and hydraulic hookups on site. Main Components: A: Self-supporting frame with stainless steel cladding (panels 1–6 removable) B: Basin with evaporator C: Condenser unit D: Temperature controller E: Control cabinet F: Hydraulic circuit with pump (second pump optional) 2.2 Structure The compact monoblock housing contains all components necessary for operation. The external cladding is made of stainless steel; individual panels can be removed for maintenance purposes. 2.3 Basin The stainless steel basin houses the evaporator block. It is insulated with high-density polyurethane foam. A blower ensures water circulation within the basin. 2.4 Condenser Unit The condenser unit can operate with either cooling tower or well water, depending on order specification. It supplies the evaporator block and is located beneath the basin. 2.5 Temperature Controller The controller is a modern microcomputer with a high-resolution display and LED indicators for operating status. The control system is programmed to offer maximum operational safety with easy user operation. 2.6 Control Cabinet The control cabinet is dust- and splash-proof. It contains: - Main and emergency switch - Contactors, thermal relays, fuses - Safety transformer for control circuits Access is provided by removing panel 1 below the temperature controller. 2.7 Hydraulic Circuit with Pump Panel 3 is removed for connection. The following connections are provided: A – Water make-up (T1): Connection to water supply; fill level is controlled via float valve. B – Return line (T2): Return flow from the consumers. C – Overflow (T3): Connection to the process wastewater outlet. D – Chilled water outlet (P1): Supplies the consumers; open the shut-off valve before commissioning. A second pump (P2) is available as an option. E – Condenser water supply: Ledpoxvca Asfx Ac Aert The shell-and-tube condenser can be operated with well water or cooling tower water: Scheme A – Well Water: Use the small connections C1, C2 (inlet and outlet). The large connection remains closed. A pressure-regulated valve control can be installed as an option. Scheme B – Cooling Tower Water: Use C3 and C1/C2 in parallel to increase the flow cross-section. It is recommended to install a mechanical filter at the water inlet to prevent contamination. Manufacturer: FIC S.p.A. – Via Trivulzia 54, 23020 Mese (SO), Italy Model: RED COMPACT V.7

Condition: new, machine/vehicle number: 6750, power: 125 kW (169.95 HP), fuel type: diesel, overall weight: 3,500 kg, color: black, gearing type: mechanical, number of seats: 3, PROFI FOOD TRUCK RENAULT (NEW) – FULLY EQUIPPED & READY FOR IMMEDIATE USE! Ledpfxsz Epu Ns Ac Ajrt Start your successful food business right away! This new food truck combines maximum functionality, first-class premium quality, and a modern design. Equipped with a brand-new, professional stainless steel kitchen, the vehicle meets all gastronomy and hygiene standards. Your highlights at a glance: 🚚 Driver's license class B: Max. 3,500 kg total weight – drivable for everyone. 💳 Rent-to-own & Leasing: Flexible financing options available! 🛡️ Safety & Warranty: 1 year warranty on the body & gastronomy kitchen + Renault manufacturer's warranty. 📑 All-inclusive package: We will handle the TÜV inspection and expert assessment completely for you. VEHICLE & TECHNICAL DATA: Condition: NEW (Vehicle number: 0897) Engine & Power: Diesel, 125 kW (170 hp) | Euro 6 (Green environmental badge) Seats: 3 seats | Manual transmission | Summer tires Equipment: Parking sensors, rear view camera/display GASTRONOMY EQUIPMENT (STAINLESS STEEL): 🔥 Professional gas appliances (Bertos brand): Gas fryer “Bertos”, 2 x 8 liter capacity, dimensions (W x D x H) 600 x 600 x 290, power: 13.2 kW, made of stainless steel, with drain tap, GL8+8B Gas stove “Bertos” with 4 burners, dimensions (W x D x H) 600 x 600 x 290, power: 12.4 kW, made of stainless steel, G6F4B Gas grill “Bertos”, smooth plate, dimensions (W x D x H) 600 x 600 x 290, power: 8 kW, made of stainless steel, G6FL6B ❄️ Cooling & Hygiene: Refrigerator with glass door (perfect for drinks) Small under-counter refrigerator "Liebherr" 💧 Water system: Water system with water canisters, 30-liter capacity with fresh and wastewater canisters Two stainless steel sinks with fittings Hygiene package with folding towel dispenser and soap dispenser 10-liter hot water boiler Pump ⚡ Lighting: LED lighting on the ceiling LED lighting with color changing effect around the serving hatch with remote control Emergency light ✨ Safety & Extras: Serving counter and work surfaces made of brushed stainless steel Insulating wall at the cooking area (fireproof) Exhaust hood made of labyrinth filters Non-slip floor for gastronomy Splash guard optional Built-in insulated generator cabinet 🛠️ INDIVIDUAL CUSTOMIZATIONS POSSIBLE! Do you need a different length, more payload, or special custom equipment? We can also modify this model exactly according to your requirements! Contact us now for a viewing or a non-binding consultation.

Condition: ready for operation (used), Year of construction: 1999, x-travel 350 mm y-travel 260 mm w-axis 450 mm z-axis 110 mm tool taper SF 32 Quickchange-System turning speed range - stepless 50-6300 U/min table surface area 670 x 320 mm table load 0,2 t feed range - table manuell mm/min Ledpfsz Dpz Tsx Ac Asrt feed for quill 1: manuell mm/U total power requirement 2,9 kW weight of the machine ca. 0,9 t dimensions of the machine ca. BTH 1,47 x 1,34 x 2,10 m Infinitely variable electronic spindle speed control: 50–6,300 rpm (with 5 memory presets) Power: 2.9 kW (100%), 40 Nm max. Clockwise/counter-clockwise thread cutting Adjustable quill depth stop Precision height adjustment with fitted column wedge Includes machine base with integrated tool cabinet Fine depth feed via handwheel Precision coordinate table incl. direct measuring system Heidenhain digital position display Swiveling tool rack for 12 SF32 tools Incl. Heidenhain digital readout Incl. coolant pump Incl. electrical schematics; operating manual not included

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, grinding length: 500 mm, grinding width: 250 mm, Young, like-new demonstration machine: High-precision surface grinding machine, "Optimal" series, available at a special net price. Grinding area: 500 x 250 mm Features: ● Surface grinding machine with automatic vertical feed ● Grinding sequence: roughing – finishing – spark-out ● Siemens S700 touchscreen panel and electronic handwheel for Y-axis ● Digital display for vertical axis Y and cross axis Z ● Table cover and splash guards in stainless steel design ● Electrical cabinet fitted predominantly with Siemens components ● Includes manual dressing device, electro-magnetic chuck, and coolant filtration system Main technical data: Grinding length mm 500 Lodpoyak Dlsfx Ac Aert Grinding width mm 250 Distance table surface to spindle center mm 450 Table drive Hydraulic Table load kg 180 Longitudinal movement X Table speed, steplessly adjustable m/min 7 – 23 Max. longitudinal travel mm 560 Cross movement Z Max. travel speed mm/min 990 Max. cross travel mm 275 Vertical movement Y Max. travel speed mm/min 460 Grinding spindle / Grinding wheel Spindle power kW 2.2 Wheel dimensions mm 200x20x31.75 Spindle speed (speed control optional) min⁻¹ 2850 Dimensions Machine weight (net) kg 1800 Machine dimensions (inc. reciprocation) Width mm 2300 Depth mm 1650 Height mm 1680 Power connection kW 3.7 All model series include standard accessories: ● 1 standard grinding wheel ● 1 wheel flange ● 1 dressing block with diamond ● 1 balancing arbor ● 1 balancing stand ● 1 machine lamp ● 1 set of machine tools ● 1 set of documentation with spare part list ● Machine in CE-conform (metric version) Precision and surface quality at optimal price. Fully equipped for universal use in a wide range of industrial and application areas. Machine comes with a 12-month parts warranty. By the way, aside from affordable new and certified used machines, we offer even more: • On-site consultation and solution finding • Organization of machine transport to your facility • Installation, commissioning, and turnkey handover • Spare parts supply • Control training for Siemens, Heidenhain, and Fanuc • Trained service staff available in your area and more • 24/7 telephone support • Tax-optimized trade-in of your old machine • Attractive financing options, even without down payment

Condition: used, Year of construction: 2025, New demonstration machine! List price €25,500 net. Machine concept WL 4 / 18.5 kW. The Weima high-performance shredders, with their flexible application options, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into wood chips, and achieve an enormous volume reduction of the material, especially with bulky materials. Operating principle: The machine is equipped with a large feed hopper and can be fed either via a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. The hydraulically controlled slide feeds the wood waste to be shredded to the cutting area of the rotor and is automatically and load-dependent. The internal slide guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are suspended on universal joints to avoid transverse forces on the piston seals. The patented and profiled V-rotor made of solid steel has a diameter of 256 mm and operates with a rotor speed of 80 - 120 rpm. The concave, aggressive and 4-way rotatable knives/cutting inserts are located in milled knife pockets on special knife carriers. This patented system guarantees, through the resulting reduction of the cutting gap between the counter-knife and the rotor, a high throughput, low energy consumption and an optimal discharge of the shredded material. The screen attached under the rotor determines the chip size (10 - 100 mm). On request, a hydraulically opening screen basket is also available. The power transmission from the electric motors is via V-belts to a heavily dimensioned gearbox, which is attached to the rotor stub on one side. Equipment and technical data: Drive power 18.5 kWHopper opening with Logspacer: 600 x 1,050 mmHopper capacity: approx. 0.6 m³Working width of the rotor: 600 mmDiameter of the rotor: 252 mmRotor speed 60-100 rpmNumber of knives: 28Type and size of knives: concave / 40 x 40 mm, cutting insertsScreen size: 12/10 mmPainting: Weima Standard RAL 2002 / 7016Connection value: 400 V +/- 5% / 50 HzWeight approx. 1,300 kg including:Control cabinet with display and 5 m cableElectrical controlStar-delta startRubber vibration elementV-rotor (patented) with knife pockets milled into the profileGearbox limit switch2nd knife rowClamping bar on the slide Lodpfxszuf U Tj Ac Ajrt Location:

Condition: good (used), Bluhm Weber Legi-Air-4050S Labeling Machine 4.14.1 Basic Structure The system is designed as a closed aluminum profile frame and has a very compact design. The control cabinets are integrated into the lower part of the frame. The main valve manifold is located behind a service door below the control panel. The system includes four workstation stops. Operation is via a touchscreen. The control panel is mounted on the right side of the frame. A Bluhm Weber labeling system is used in the station; the Bluhm Weber documentation applies accordingly. 4.14.2 Operational Sequence - The incoming workpiece carriers with I/O modules are stopped, lifted (positioned), and contacted in substations 10.1 and 10.2. In these two stations, the I/O modules are automatically labeled. In substation 10.3, the I/O modules are automatically labeled. Label generation and content creation are automated, as is application to the devices. - After labeling is complete, the module is finalized in station 10.4. For this, it is stopped, lifted, and contacted. Following finalization, the workpiece carrier is automatically ejected from the station. Legi-Air 4050 RH Label Print and Apply System with Zebra ZE500-4 Print Module Motor-driven large roll unwinder Label rolls with a diameter of up to 430 mm and 900 linear meters of label web ensure long continuous production runs. Tandem operation ensures uninterrupted production. Applicator dies Quickly interchangeable applicator dies allow for the processing of label sizes ranging from small nameplates to DIN A5 EAN128 shipping labels. The Quick-Change option allows for format changes in seconds. Spring-loaded applicator dies compensate for uneven product surfaces, ensuring clean label application. Controller Ledpfsibh Tkox Ac Asrt Bluhm Weber Standard Controller Zebra ZE500-4 Print Module Label Printer Standard Features • Print Methods: Thermal Transfer or Direct Thermal • Orientation: Right or Left • All-Metal Industrial Construction • 16 MB SDRAM, 64 MB Flash Memory • Applicator Interface • Transmissive and Reflective Media Sensors • Multi-Level Element Energy Equalizer™ (E3™) for High Print Quality • Real-Time Clock • Rotating Display • ZPL II™ – Universal Language for Zebra Printers Technical Specifications Maximum Print Width • 104 mm Media Specifications • Label and Carrier Width: 16 mm to 114 mm • Minimum Retraction Length: 13 mm • Minimum Non-Retraction Length: 6.5 mm • Minimum Stream Mode Length: 6.5 mm • Maximum Length: 990 mm • Maximum Continuous Media Length: 3810 mm mm • Ribbon width: 25.4 mm to 107 mm Resolution • 8 dots/mm (203 dpi) or 12 dots/mm (300 dpi) Maximum print speed • 305 mm per second (203 and 300 dpi) Technical specifications • Width: 245 mm • Depth: 379 mm • Height: 300 mm • Weight: 15.4 kg Financing through our bank is also available. komplett-konzept.leasingo.de Further assembly modules in other sizes – new and used – can be found in our shop! International shipping costs on request!

Condition: used, This listing is for the Walker Class 11 Biological Safety Cabinet The unit is in full working condition and is ready for immediate use A Walker Biological Safety Cabinet is a type of biosafety cabinet (BSC) designed and manufactured by Walker, a company that specializes in laboratory containment equipment. These cabinets are used in laboratories to provide a controlled, contaminant-free environment for handling potentially hazardous biological materials. What Is a Biological Safety Cabinet? A Biological Safety Cabinet (BSC) is an enclosed, ventilated laboratory workspace designed to: Protect the user from exposure to biohazards, Lodpfxoxhfr Ee Ac Aort Protect the experiment or product from contamination, Prevent environmental contamination. They achieve this through HEPA (High-Efficiency Particulate Air) filtration and controlled airflow systems. Walker Biological Safety Cabinet – Key Features HEPA-filtered airflow: Removes airborne particles and microorganisms. Laminar airflow: Provides a clean work area by maintaining unidirectional air movement. Front access sash: Allows operator access while maintaining airflow barrier. UV light for sterilization when not in use. Ergonomic design: For user comfort during long procedures.