Used Boot Washing Station for sale (6,420)

Condition: used, functionality: fully functional, machine/vehicle number: 00039D88, For sale is a used heating oil pressure unit, model OEG Gerätebau DE 3200, for the reliable pumping and pressure maintenance of heating oil in heating systems. This pressure unit is suitable for supplying oil-fired systems and ensures a constant fuel supply. Thanks to the integrated pressure accumulator, pressure fluctuations are compensated, and stable system operation is supported. Technical data: Manufacturer: OEG Gerätebau Model: DE 3200 Flow rate: 320 l/h Operating voltage: 230 V / 50 Hz Nominal current: 2.0 A Max. operating pressure: 6 bar Bsdpfx Acsy U Uc Nj Todg Pressure connection: IG ¾" Suction connection: IG ¾" Year of manufacture: as per nameplate CE marking present

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: DC, input voltage: 400 V, total height: 2,890 mm, total width: 2,440 mm, total length: 2,890 mm, Mobile Welding Station 10ft for PE/PP Pipes incl. HÜRNER CNC 500 (SST Series) Weather-Independent Butt Fusion Welding at Industrial Standards Stop building makeshift welding tents on site. This compact 10-foot welding station (SST 10 / 500) is a self-contained, ready-to-use production cell for demanding PE/PP pipeline construction. Plastic weld seams do not tolerate drafts or moisture—this container guarantees consistent, standard-compliant environmental conditions and complete documentation. Your advantages in pipe handling: The bottleneck on site is the handling. This station is uncompromisingly designed for ergonomic efficiency. Pipe sections are passed directly through the container using the 800x800 mm end-side pipe doors (with integrated brush seals). The built-in 1,000 kg lifting table, mobile pipe lifters, and an electric chain hoist make handling pipes up to OD 450 mm an efficient one-person job. Plug & Play: Connect power and start welding. Technical Data (SST 10 / 500): Container: 10" High Cube, Double Door, One Way (incl. chequer plate steel floor) Welding machine: HÜRNER CNC 500 ECO 2.0 USB & Bluetooth data management Working range: OD 200 to OD 450 mm (including reduction inserts) Lifting technology: Electric lifting table (1,000 kg), electric chain hoist with trolley/manual trolley (3m lift) Bsdpfeyzn Ifsx Ac Tsdg Pipe handling: 2x universal mobile lifters (up to DN500), 2x pipe doors (800x800 mm) Power supply: 32A & 16A CEE (400V), 3x 16A Schuko (250V IP54), RCD 63A Lighting: 2x LED floodlights (24,000 lm, 5000 K), 2x LED moisture-proof fittings Condition: Fully prepared for welding (CE), incl. DGUV inspection & 2x thick coat paint (color of your choice) (Note: Supplied without power generator) Available configurations in this series: This listing refers to version SST 10 / 500. We manufacture these stations in four standardized performance classes to suit your project: SST 10 / 355: 10-foot container, suitable up to OD 355 mm SST 10 / 500: 10-foot container, suitable up to OD 450 mm (offered model) SST 20 / 355: 20-foot container (extended work area), suitable up to OD 355 mm SST 20 / 500: 20-foot container (extended work area), suitable up to OD 450 mm Custom modifications are available on request. Contact us for a detailed quotation.

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: M60L/8583, Offer Number: M60L/8583 Machinetype: screw washing machine Make: MOC DANNER Type: Shark 100 Bdsdewi Swyopfx Ac Tog Constr. year: 2014 capacity: 250 Kg setting plane: output: Location: In our warehouse

Year of construction: 2003, condition: used, 1 Markert Cleantec continuous surface cleaning machine, year of manufacture: 2003 Continuous length approx. 7,000 mm with division into washing zones, rinsing zone, and blow-off system with associated transport system with 2 x 90° curved elements with chain drive with electric control for transporting wire mesh baskets, primarily 400 x 600 mm with associated control cabinet for controlling the timed material flow Machine no.: 932 Bdedpoyfumnefx Ac Tog *

Condition: good (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, total width: 2,400 mm, The Lamina Gluer is a manually fed, in-line folding, gluing, and taping machine. Thanks to its smart design, it can handle different sizes and materials. Tool-free setup enables quick changeovers, even for short production runs. Optional machine features include cold glue, rear support unit, working station, tape applicator, and more. The Lamina Gluer is a straight-in-line gluing machine built on a robust frame made of extruded, anodized aluminum profiles. The machine offers manual feeding as standard, with an optional automatic feeder for die-cut, creased, and slotted materials. The operator positions the blanks, and the hot melt unit applies adhesive as the material passes through the machine. Glue line length and exact position can be pre-set using a programmable logic controller (PLC) and a touchscreen interface. A system of pressure rollers ensures perfect adhesion and guides glued blanks onto a pull-out tray, which is easily adjustable for various sizes. The machine comes equipped with adjustable and interchangeable side guides, enabling efficient gluing of 2-piece boxes. The Lamina Gluer is supplied ready for connection to electric and pneumatic systems. Bdjdexwcwwspfx Ac Teg The Lamina Working Station is an additional option for the Lamina Gluer. Products are fed through the Gluer, which applies pre-programmed glue lines, and continue into the Working Station, where they are positioned on vacuum belts. A second piece is mounted and positioned using side lays and pneumatic stops for high-quality finishing. The unit can be adjusted for a wide range of products, from single- to multi-part displays and boxes, large back supports, shelves, and more. Transport The material is conveyed by four vacuum belts that bring the sheets to a stop bar for subsequent operations. The vacuum is generated by a fan that secures the sheets for optimal handling and precise registration. During production, the operator has full access above the sheets for additional mounting, thanks to the vacuum belt design. Pressure Rollers Material passes through two pressure rollers at the machine’s end for optimal adhesion. Registration Registration accuracy is +/- 1 mm and is achieved by a combination of photocell sensors and pusher guides. The operator uses a side lay guide to simplify the mounting process at the station.

Condition: excellent (used), Year of construction: 2009, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, table width: 650 mm, For sale are 2 OPS Ingersoll EDM machines, model Gentry Eagle 500. The machines are being sold from a production facility, are in very good condition, and fully functional. Technical data: Year of manufacture: 2009 Bedpfexrpm Ujx Ac Tjdg Operating hours: approx. 30,758 Available from: By arrangement Travel paths: X-axis: 525 mm Y-axis: 400 mm Z-axis: 450 mm (430 mm with Erowa) C-axis: controlled (0.001 mm resolution) Electrode holder (quill): Erowa ITS Work tank: 770 mm x 670 mm x 440 mm Table: 750 mm x 650 mm Accuracy: 0.005 mm to 0.015 mm Max. dielectric height: 395 mm Max. pallet size: 750 x 950 x 420 mm Max. workpiece weight: 1,000 kg Max. electrode weight: 100 / 50 / 15 kg Max. throat depth: 585 mm Equipment: - Filter system with 16m² paper candle - Compressor - Recooling unit - Liftable tank with automatic tank refilling (ATA) - CO2 fire extinguishing system Machine weight: 3,640 kg (incl. generator and control panel) Operating weight: 6,450 kg (ready for operation) Footprint: 3,135 x 3,944 x 2,871 mm Options: - Pallet holder for four Power-Grip160 (not included in price) - Various 4-fold aluminum exchange pallets with chip - Various Erowa ITS electrode holders with chip Transport and loading can be organized Europe-wide at an additional cost upon request. Prices plus VAT. Inspection possible by appointment. Please contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or contact options please visit our website.

Year of construction: 2006, condition: used, functionality: fully functional, TECNOVA 105 RECYCLING LINE with WASHING LINE Re-pelletizing line for plastic recycling with washing line Production 350 kg/h 2 washing tanks in stainless steel Fosha 500 grinder Buffer silo Screw diameter 105 mm Bedsyx D Hfspfx Ac Tsdg Forced feeder Double piston filter Degassing unit Hot die face pelletizing system Centrifuge and vibrating screen

Condition: good (used), Year of construction: 2006, functionality: limited functionality, 6-colour automatic screen printing machine, in good condition, little used. The machine has been dismantled due to lack of space. Bdedpeyv Uunsfx Ac Tjg

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 9,000 l, Equipment: documentation/manual, BRINOX 9000 L GMP Wash and Elution Solution Tank Horizontal Stainless Steel Pressure Vessel – Year of Manufacture 2020 – Complete FAT & GMP Documentation BH6752-BH1001 Package 32 Manufacturer: BRINOX Process Systems Serial Number: 1003558 Bdodpfoykkk Hsx Ac Tjg Year of Manufacture: 2020 Nominal Volume: 9,000 liters Design: GMP-compliant stainless steel pressure vessel Application The tank was used in a pharmaceutical manufacturing facility. Suitable for preparation, storage, and dispensing of process solutions in GMP environments. Construction and Equipment - Cylindrical stainless steel tank in horizontal configuration - Front-end process connections - Large manway with pressure lock - Integrated CIP (Cleaning-In-Place) system with spray ball - Highly polished internal surfaces - Hygienic product-contact connections - Multiple instrumentation and sensor nozzles - Documented weld seams with full traceability - Separate stainless steel support legs included Condition Visually and technically in very good condition. Internal surfaces are mirror-polished and clean. No visible damage to the shell or connections. Accessories and attachments present as per photo documentation. FAT and Documentation Status According to FAT documentation “IT-11.1 Inspection of Welding Documentation”, weld documentation was inspected during the Factory Acceptance Test (FAT 01, 23.10.2020). The following were confirmed, among others: - Identification of welders and weld inspectors - Welder qualifications according to EN ISO 9606-1 - WPS and WPQR documentation - Proof of shielding gas suitability - Documented test welds - Visual spot checks with no findings - Traceability according to material certificates 3.1 The complete weld documentation is part of the Turn-Over-Package. Documentation – Fully Available - FAT plan and FAT report - Layout and construction drawings - P&ID diagrams - Calibration protocols - Surface finish and roughness tests - Leak test - Welding plan - WPQR - WPS - Welder qualifications - Borescope inspection report - Incoming goods inspection reports - Sensor calibrations The complete technical documentation is available digitally. Special Features - Fully documented GMP configuration with certified welding documentation and extensive quality package - Ideally suited for reinstallation in pharmaceutical plants or environments requiring validated applications.

Condition: good (used), Ceever Spraymaster Turning Spray Washer The Spraymaster series industrial washers are advanced solutions for spray cleaning small and medium-sized components with a capacity of up to 4000 kg. Thanks to a rotating table that ensures even wetting of the parts with the spray jet, these systems guarantee maximum surface treatment efficiency. Bdedpfjx Ex Nzjx Ac Teg Inside the treatment chamber, a channel system with strategically positioned nozzles enables complete spray cleaning of all surfaces, thus optimizing chemical, mechanical, and thermal processes in a single operation. Manufacturer: Ceever Type: Spray Master Turning Machine No. Z 429 Load: 500 kg/batch Voltage: 380 volts Current: 90 A Connected load: 62 kW Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: new, Year of construction: 2024, functionality: fully functional, total width: 512 mm, total height: 1,952 mm, total length: 772 mm, Directly from the manufacturer, the original from Apfel GmbH. Fully assembled including 2 KRB 4700 shelves 1 storage box KEN 6422 (No. 62) 2 storage boxes KEN 4322 (No. 42) Bdjdpfouvigpox Ac Teg 1 waste garbage can made of sheet zinc 2 brooms 1 hand brush 1 dustpan 1 set of shadowboards 1 compartment for cleaning products 4 swivel castors with parking brake Load capacity: 400 kg Dimensions: 512 w x 1,952 h x 772 t Structure powder-coated in black gray RAL 7021 (body) Various designs and special solutions possible, we as the manufacturer will support you with your wishes! (See pictures 3+4)

Condition: excellent (used), Year of construction: 2007, Laboratory foam dosing station with foam mixer and applicator The system works in a similar way to the SUPRA MIX concept. Several chemicals are dosed and mixed with water and air in a controlled ratio. Recipes are stored on the controller and can be changed during operation. Foam applicator with mixer - Dynamic foam mixer with online dosing of 5 products + water - 5 dosing pumps - One direct inlet for mixing - Product monitoring for the chemicals - Air dosing valve - Dynamic foam mixer with adjustable speed - PLC control - Foam applicator - For one-piece carpets up to 1 m wide Bodpfx Aceu D E A De Tedg applications Stain blocker Dirt, water and oil repellents Fluorocarbons Antistatic chemicals Plasticizers Flame retardants Antibacterial chemicals Moth and beetle repellents Pile stabilizers Anti-hair loss agents Resins for wrinkle prevention and dimensional stability Specification Foam density: 20 - 100 g/l (higher density at lower flow rate) Dosing range: 0.5 - 500 g/l (1:100 with each pump) Foam volume: 50 - 500 l/min Electrical data Connected load: 6kVA, 10A Mains voltage: 400V / 50Hz Control voltage: 24V Dimensions HxWxD = 1400 x 2100 x 860 mm Year of construction: 2007 Purchase price: 47600 ,- € Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: used, Year of construction: 1995, color: yellow, mileage: 1,001 km, first registration: 01/1995, fuel type: diesel, gearing type: other, driver cabin: other, Vehicle location: Bovenden, Bdodpfspiu U Ejx Ac Tjg Body: Roll-off frame with hydraulic station and fifth-wheel plate Mercedes Benz V8 engine ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Year of construction: 2011, condition: as good as new (ex-display), machine/vehicle number: 10.000 Ltr, Tank & Environmental Protection Wozniack – Certified Specialist Company according to the Water Resources Act Dear Sir or Madam, We offer a 10,000-liter double-walled storage tank for diesel storage with the following specifications: Nominal capacity: 10 cbm Quantity: 1 Used, but fully refurbished, meaning the container has been cleaned, reconditioned, primed, and painted. Bdodpocl Sb Rsfx Ac Teg Color: Paint RAL... as per your request. Material: Steel in steel, material S235JRG2 Documents: Manufacturer's certificate/test certificate according to DIN 6616 D/2 and nameplate. Shape: Cylindrical, lying horizontally on 2 welded saddle supports (ground clearance approx. 100 mm). Monitoring space of the double wall with leak detection fluid. Container dimensions: Length: approx. 5,350 mm plus 600 mm for diesel pump Diameter: approx. 1,600 mm Weight: approx. 2,000 kg Equipment/fittings: Manway 500 mm with manway cover, screws, and gasket. - Filling pipe 2“ with TW valve (filling cap) (from 20 m³ = 3“) - Suction pipe 1¼“ - Dipstick and dipstick closure – tank level indicator - Vent pipe with cap 1 ½“ - Limit value sensor with type approval - Leak detection device (optical) = LAS with leak detection fluid - Access ladder for side mounting, supplied separately. Tank approved for installation outside of earthquake/flood zones. Diesel fuel dispenser with data recording Type: HDM80eco LTE Flow rate: 75 l/min Cloud-based basic module free of charge You can see who, when, where, and how much fuel was dispensed. Fueling is done via tank key or PIN input. Dispensing area/fueling station Type: KAP system, galvanized Area with ramps (mm): approx. 2,650 x 5,300 Area without ramps (mm): approx. 2,500 x 5,000 Pan height (mm): approx. 60 - Nationwide general building approval - Approved for installation outdoors and in buildings (For outdoor installation with folding cover and passing pipes) - 2 collection basins, each with a volume of 150 liters. ===== Top offer: Liquid fertilizer - AHL tank systems in sizes from 10,000 to 100,000 liters. Of course, you can also participate in the design of your tank system! All our systems are thoroughly inspected and checked by selected employees at our company. We also offer affordable delivery upon request. You can inspect our systems at any time. Further tank systems for above-ground as well as underground storage are available in all sizes and are for sale on our premises. Have we convinced you of our offer? If you have any questions or requests, please call us, one of our experienced employees will be happy to advise you. Price/Shipping The price for the fuel station applies ex works Warstein, unloaded. Delivery can be offered at a low cost for an additional charge. Delivery time: upon agreement. You will receive an invoice with VAT shown. In addition, we purchase existing tank systems and can, as a certified specialist company according to the Water Resources Act (WHG), professionally empty, clean, dismantle, and remove them. Sincerely, from Warstein Tank & Environmental Protection Wozniack

Condition: used, mileage: 1,001 km, gearing type: other, fuel type: diesel, color: yellow, first registration: 01/1995, Year of construction: 1995, driver cabin: other, Vehicle location: Bovenden, Body: Hydraulic station, compressor Mercedes Benz V8 engine ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Bdodpfx Aeugwrajc Teg

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: contino spezial 260, total length: 10,200 mm, total width: 2,532 mm, total height: 2,487 mm, water consumption per time unit: 4 l/min, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, pressure: 6 bar, temperature: 80 °C, heating capacity: 50 kW (67.98 HP), power: 75 kW (101.97 HP), waste water connection: 50 mm, water pressure: 2 bar, water connection: 25 mm, Equipment: documentation/manual, Machine description - the lids of the crates can be folded down to the side, total transport height approx. 1000 - 1050mm - the two track belts each have 2 guides on the side, one guide each from above and a cam spacing of 700mm - Feed zone with 1500mm straight length with drive, working height approx. 1000mm - Main washing zone with 2700mm length, tank 600l with heating 50kW, (20kW possible via hot water) washing temperature 55-60°C, 1 stainless steel centrifugal pump 7.5kW 1500l/min at 2bar, stable external box filter, brush cleaning takes place after the first spray cleaning with an external brush, then repeated spray cleaning, Bjdpfx Acjrr Smls Tsdg - 1800mm rinsing zone with approx. 150 - 250l/h via direct fresh water supply, the fresh water is supplied hot at at least 60°C; 500mm feed zone with top suction connection (stainless steel radial fan, DN 250 connection); 1800mm long blow-off with 2 5kW fan motors; 500mm long discharge table Washing, rinsing and drying system length 8800mm Hourly output (adjustable with LENZE frequency inverter) approx. 250-300 crates with hinged lids (cross flow) or 500 lids in longitudinal flow incl. label removal with lateral brushes (LENZE drive 0.37kW) Brush cleaning takes place after the first spray cleaning with an external brush, followed by a second spray cleaning, Additional hot water heat exchanger in the machine, Drum filter for automatic label discharge, with this equipment the dirty water in the main flow is fed through a drum filter, the label dissolution and mash formation is significantly reduced, the washing tank capacity can be used for several shifts without changing Gravity roller conveyor for Euro pallets, internal width 840mm, very stable design made of 4mm thick stainless steel sheet, the rollers are made of galvanized steel 5000mm The machine has the following connections: - Fresh water at approx. 60-80°C 3/4", flow pressure min. 2 max. 6bar via hose connection 3/4" - Electricity: max. approx. 50kW, 400V 50 Hz - Waste water DN 50 discharge into floor drain - Hot water 1 1/4" flow and return, flow temperature min. 80°C, flow rate approx. 3-4m3/h Key advantages of our machines: - completely double-walled, sound and heat-insulated machine housing, manufactured in one piece and completely welded, low energy consumption - reliable operation, very long service life - long washing treatment and nozzle and washing system refined over the years = excellent washing results - Nozzle arms can be removed and cleaned without tools, stainless steel nozzles with large passage and optimized droplet size = good cleaning effect + insensitive to soiling - Washing tunnel designed for crate size 300x400x600mm - Use of first-class attachments, e.g. LENZE drive and frequency converter, EDUR stainless steel centrifugal pump, stainless steel ELEKTROR Esslingen blow-off motor with motor separation and SIEMENS switch cabinet components

Condition: used, Turning station RITTAL / E SYS-K System GmbH Automated turner for packaging made from ALU system profile Swivel station with roller conveyor, ALU system profile BOSCH REXROTH Weight of turning device: 730 kg Bdsdpfx Asv Tdkbec Tog As-new condition

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 9,000 l, Equipment: documentation/manual, BRINOX 9,000 L Wash Solution Tank – 316L – Jacketed – TÜV / PED – As New Manufacturer: BRINOX d.o.o. Tag No.: BH6751-BH1001 Package 31 Year: 2020 Condition: As new / unused Technical Data Product type: Wash solution tank Nominal volume: approx. 9,000 litres Wetted material: 1.4404 (AISI 316L) Design: Horizontal layout CE marking: available Pressure vessel in accordance with PED 2014/68/EU TÜV-inspected with acceptance report Jacket for heating/cooling available Designed for pharmaceutical applications Internal surface: • High-gloss polish • Pharmaceutical-grade weld seams • Documented surface quality Design / Equipment • Custom-built in 316L stainless steel • Large manway with pressure closure • Integrated CIP spray nozzles / cleaning pipes • Multiple clamp and flange connections • Instrument ports (pressure, temperature, sensors) • Robust lifting and carrying lugs • Heavy-duty industrial design • Pre-installed external piping and process connections • Excellent accessibility for maintenance and inspection The images clearly show the high-quality workmanship, the clean welding, and the mirror-polished product-contact internal surface. Condition • Never used in production • Inventory stock from project surplus • Absolutely clean interior • No corrosion • No signs of use • As-new industrial condition • Immediately available Suitable for • Wash solutions in pharmaceutical processes • WFI / PW applications • CIP media • Buffer and process solutions • Biotechnology • GMP production systems • Sterile liquid processes Documentation – fully available and structured Bdsdpfxoykkive Ac Teg Comprehensive, project-specific quality and manufacturing documentation included, such as: • EU declaration of conformity and warranties • Reports and EU component verifications • Assembly documents • Component drawings • TÜV certificate with acceptance report • Nameplate documentation • TÜV design review and certification • Welder lists, welding procedure qualifications, samples • Analysis certificates for welding filler material • Analysis certificates for shielding gas • Manufacturer qualification certificate • Non-destructive testing (NDT) reports • Material certificates (3.1) • Calibration certificates • Internal pressure test report • Dimensional accuracy check • Surface roughness report • Surface treatment report • Operating and maintenance manuals (unit) • Operating and maintenance manuals (components) • FAT documentation (Factory Acceptance Test) Complete documentation package available digitally. Special Feature This is not a standard tank, but a premium, custom-built unit in genuine pharmaceutical quality with certified pressure design, documented manufacture, and full PED compliance including TÜV acceptance. The heavy-duty construction, large connections, and CIP integration make this vessel ideal for demanding GMP applications.

Year of construction: 2019, condition: ready for operation (used), functionality: fully functional, workpiece height (max.): 10 mm, operating speed: 50 mm/s, TECHNICAL DETAILS Minimum processing size: 100 mm x 400 mm Processing thickness: 2 - 10 mm Maximum speed: 3 m/min MACHINE DETAILS Power: 45 kW DIMENSIONS Dimensions of the enclosure (L x W x H): 6,260 x 1,280 x 1,750 mm Bodpfsyk Sgiox Ac Tjdg Dimensions of the control cabinet: 1,000 x 480 mm

Condition: used, Year of construction: 2013, functionality: fully functional, total length: 20,000 mm, We are selling used linear carwash from well known manufacturer CHRIST, year of production 2013. Carwash is complete, without chains and dry wiping. Approximate length of carwash is 20 metrov. Including: • Advertising and foam spraying portal • Double-sided brushes for washing side skirts and rims • High pressure washing portal • Portal for washing with textile brushes • Driers • Waxing platform • Detergent dispenser • Floor gratings Suitable for companies that want to increase vehicle washing capacity or install a new washing line with reliable equipment. Bdodpfx Acoxy E Azo Teg

Condition: new, Dimensions (L,W) 1400 x 1750 mm Weight , kg tiltable yes/no ja RUCHSER assembly tilting table RU-MKS 1,4 ----- Universally applicable work table e.g. for frame assembly, roller shutter box assembly, bars, sash fittings, glazing Equipment of machine, alternative / optional equipment on request! Pos. 1.0: Article no .: 8820000 RU-MKS-1,4 assembly tilting table Basic dimensions 1400 x 1750 mm, extended 3400 x 2500 mm Support surface with 3 support bars, 2 of which are adjustable, one permanently mounted on the upper extension, covered with felt. Support surface with width and Height / depth pull-out. Pneumatic tilting device, Payload 130 kg. Actuation via foot valve. Roller conveyor can be folded down manually and pulled out to the side from 1400-2500 mm, roll length 140 mm closed. Roller conveyor height in vertical Table position adjustable from 300-380 mm, Horizontal working height adjustable from 920-970 mm. ! For security reasons, at least one Bsdpfxjx H Al As Ac Todg Flat clamping cylinders can also be ordered! Pos. 1.1: Article no .: 5582 Pneumatic swivel device of the roller conveyor for MKS Pos. 1.2: Article no .: 21127 Support beam 1400mm not extendable for RU-MKS Pos. 1.3: Article no .: 5585 360 ° rotating device with pneumatic locking in 180 ° steps Rotary brake with double-sided actuation When using the rotating device, the minimum roller conveyor height of the increases MKS tables on 330mm Pos. 1.4: Article no .: 6455-01 6 pieces of storage boxes with 2 compartments each, swivel mounted; for RU-MKS Pos. 1.5: Article no .: 5597-10 Driving device for semicircular rails for RU-MKS-P4 Actuation via foot valve, mounted on the roller conveyor side. Pos. 1.6: Article no .: 6354-6 3 double meter semicircular runways 30 x 10 mm. Pos. 1.7: Article no .: 5193-1 Flat clamping cylinder with manual valve, clamping range 130 mm, can be hidden attached to the support beam, with felt on the system part, Attachment left or right Please specify. Item 1.8: Article no .: 5584 Lifting device 450 mm for working on the vertical element. Actuation via foot valve. Maximum payload 200 kg for RU-MKS ...- 1.4 and 140 kg for RU-MKS ...- 2. Item 99.1 Packaging on a pallet ----- Total price in this version: on request! See attached video and PDF brochure. (Technical information according to the manufacturer - without guarantee!)

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: hydraulics, Car carpet washing machine Condition New Brand NMTEH Type Compact water 2 L/min Manufacturer Warranty 1 Year Voltage 220 Model NMTEH Country/Region of Manufacture - Latvia Cord Type Corded Power: 2,5kW Item Weight ~200kg Auto carpet washing machine The difference from other devices - does not break the embedded plastics Cleans well fabric and rubber mats Cleans rubber carpets up to 20mm high edges Hard carpets that are thick. Bsdpfx Acev A T Tqo Tedg Ours is universal and will work a long time. Blow system Without water cleaning With water cleaning automatic heating system Water conection 3/4

Condition: good (used), BALZERS LTE 020 – Thermally Controlled Sample Preparation Station Bdedpfxsxl A Edo Ac Tog ✔ Use in: Coating technology, semiconductor processing, surface analysis, electron microscopy • Digital display unit with 4 channels (B1–B4) • Temperature display in °C • Adjustable via SET / UP / DOWN • Separate controls for mains and lamp • Power supply: 220V Note: For detailed technical specifications and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. You can find more items – new and used – in our shop! International shipping costs upon request!

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 120 mm, pivoting range: 45 °, TECHNICAL DETAILS Measuring column length: 800 mm Swivel range: ± 45° Positioning repeatability: 0.005° Probing scan width: 0.05 µm Probing force: 5 to 20 mN Traverse path feed device: 120 mm Measuring range (thickness): 0.4 µm / 120 mm Resolution X-axis: 0.1 µm Bdodpfx Acoxfkkbo Tjg MACHINE DETAILS Electrical Data Operating voltage: 230 V / 50 Hz Control voltage: 24 V DC Power consumption: 3 kVA Pneumatic Data Compressed air: 6 bar Air consumption: approx. 2 Nm³/h EQUIPMENT Wavelift 800 Advanced measuring column Windows-based measuring device PC/MC interface CNC software for automated control Joystick for control Motorized Y- and X-axes Air slide Wavecontour digital probe Wavecontour digital calibration set Geometry standard RNDX 2, DKD-DaKKs Setting standard 3 grooves, DKD-DaKKs Fixed holder FHZD-CNC 2 probe sets (1x short, 1x long) Wavecontrol advanced operator panel Note: Further details on machine equipment can be found in the attached document.

Condition: used, Year of construction: 2003, functionality: limited functionality, machine/vehicle number: TSH 071, overall weight: 44 kg, input voltage: 220 V, input frequency: 50 Hz, Used Pfeiffer TSH 071 “Turbo Cube Drag Pumping Station”, portable turbo vacuum pump Manufacturer: Pfeiffer Model: TSH 071 Bdedpoxqprzofx Ac Tsg Voltage: 190-260V (50/60Hz)