Used Beka-Mak Bssa 800G/2 for sale (79,933)

Condition: good (used), Pallet rack, heavy-duty rack, high-bay rack, boltless rack, storage rack stand -Pallet rack: boltless rack, heavy-duty rack with storage shelves 2 bays / rack length 5600 mm -20 levels: compartment height adjustable -Stands: 3 pieces 3780/(1120/120 mm -Cross braces: 40 pieces 2765/60/240 mm Dcodpow Tmd Uofx Aixjk -Rungs: 40 pieces 1115/50/100 mm -Shelves: 18 pieces of chipboard 2680/1090/40 mm -Price: complete -Transport dimensions: 3780/1500/H1400 mm -Total weight: 2010 kg

Condition: used, Rubber protective mats, conveyor belt, belt conveyor, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Conveyor belt: conveyor belt -Width: 50 mm Dcedpfx Ajirukfjixsk -Length: approx. mm -Thickness: 2 mm -Number: 1x conveyor belt available -Price per piece -Transport dimension: Ø 290 x 50 mm -Weight: 2.0 kg/pc.

Condition: used, Rubber protective mats, conveyor belt, belt conveyor, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Conveyor belt: conveyor belt conveyor belt -Width: 600 mm -Length: 2290 mm -Thickness: 2 mm -Transport dimensions: Ø 100 x 600 mm -Weight: 2.6 kg Djdpeirukmjfx Aixsck

Condition: good (used), electric motor, three-phase motor -Electric motor: type T 71B 2 AB3 Dcsdpfxov Hzndo Aixsk -Power: 0.55 kW -Speed: 2790 rpm -Shaft: Ø 14 x 30 mm -Protection class: IP 54 -Dimensions: 245/140/H170 mm -Weight: 5.8 kg

Condition: good (used), Feed container for blasting system, sandblasting system, blasting system, sandblasting cabinet, rotary basket system, wire belt, overhead conveyor and roller conveyor blasting system, free blasting system -Handover: in its current condition as inspected Dedeqcyzwepfx Aixock -System: Individual components see photos -Feed container: Type Exactomat 2 G - 60 -Vacuum pump flow rate: 26.2 m³/h -Dimensions: 830/580/H1730 mm -Weight: 296 kg

Condition: used, Sprockets, duplex sprocket, sprocket -Sprocket: is used -Sprockets duplex: 2 1/2 "x 1 1/2" -Number of teeth: 25 teeth Dcjdpsdg Snfsfx Aixjk -Diameter: 533 mm -Total width: 150 mm -Tooth width: 34 mm -Take: Ø 120 mm -Number: 1x sprockets available -Price: per piece -Weight: 152 kg -other sprockets in stock

Condition: used, Thread cutting head with chaser jaws, thread cutting stock,Tapping machine, pipe thread cutter, cutting head -Thread cutting head: 1/2- 2 " -Cutting jaws: R1 -1 1/2 " -Dimensions: 870/110/H200 mm -Weight: 11 kg Dcedsf Ec S Sspfx Aixek

Condition: used, Sprockets, duplex sprocket, sprocket -Sprocket pitch: Duplex 1 1/2 "x 1" Dodpfx Asd Tg Daeixeck -Number of teeth: 25 teeth -Diameter: 318 mm -Total width: 100 mm -Tooth width: 24.1 mm -Inside diameter: 80/130 mm -Number: 25x sprockets available -Price: per piece -Weight: 33.5 kg -other sprockets: in stock

Condition: used, Electric motor, three-phase motor -Power: 2.2 kW -Speed: 2880 rpm -Shaft: Ø 25 x 40 mm -Protection class: IP 44 -Dimensions: 410/225/170 mm -Weight: 24 kg Doded Sz N Uspfx Aixock

Condition: used, Three-phase motor, electric motor, Maka milling motor -Power: 1.3 kW Dedpfxjdwhuqo Aixeck -Speed: 2800 rpm -Shaft: Ø 18 x 40 mm -Construction with: dovetail guide -Dimensions: 330/135/H195 mm -Weight: 15.7 kg

Condition: ready for operation (used), BEKA Baier + Köppel MZN 12-75 A gear pump, serial number as shown in the photo, used, minor signs of wear, 100% functional, scope of delivery as shown in the photos. Dcjdoi D E H Ujpfx Aixsk

Condition: new, pressing force: 250 t, stroke length: 400 mm, - Cylinder stroke 400 mm - Working width 1200 x 450 mm - Cylinder is movable - Pressure gauge - With V-blocks - Emergency stop - Weight 2250 kg - Motor power 7.5 kVA - Documentation Dedpfxjgg Nygj Aixsck - 400 V

Condition: new, Year of construction: 2025, functionality: fully functional, 3 m Roller Conveyor The 3-meter roller conveyor is a professional material handling system designed for feeding and receiving heavy and large-sized components in production lines and machine tool applications. Its robust construction, precision bearing-mounted rollers, and load capacity of up to 2000 kg make it an indispensable solution for demanding industrial environments. Main advantages of the machine High load capacity – a 2-ton capacity allows handling heavy metal components. 10 bearing-mounted steel rollers with a diameter of 90 mm – ensure smooth and reliable movement without jamming. Height adjustment from 545 to 855 mm – allows easy adaptation to different workstations. Working width of 600 mm – suitable for wide and non-standard material formats. Stable steel construction – resistant to twisting, deformation, and heavy-duty operation. Construction and technology The roller conveyor is equipped with 10 steel rollers, each with a working length of 470 mm. The rollers are mounted on precision ball bearings, ensuring low rolling resistance and efficient movement of heavily loaded components. The main frame is made of reinforced steel profiles, providing high structural rigidity and long service life of the entire system. Precision and work efficiency The 3-meter length and large number of rollers ensure stable guidance of workpieces over a long distance, resulting in improved cutting accuracy and reduced risk of positioning errors. The conveyor design provides excellent stability even at maximum load capacity, significantly improving operator comfort and workplace safety. Applications The CORMAK roller conveyor is designed for use in: Metalworking plants Manufacturing companies Mechanical workshops Production and technological lines requiring precise support and guidance of workpieces during machining or transport It is an ideal extension for workstations equipped with band saws, drilling machines, and other machine tools. Standard equipment 10 bearing-mounted steel rollers Dedpfx Aovu S T Tjixjck Welded steel frame Adjustable legs with height range of 545–855 mm Mounting holes for floor anchoring Technical specifications – 3 m Roller Conveyor Parameter Value Roller diameter 90 mm Working roller length 470 mm Total roller length 500 mm Number of rollers 10 Conveyor length 3000 mm Conveyor width 600 mm Height adjustment range 545–855 mm Maximum load capacity 2000 kg

Condition: new, Year of construction: 2026, functionality: fully functional, 2 m Roller Conveyor The 2-meter roller conveyor is a highly durable material handling system designed for industrial feeding and receiving of heavy components such as shafts, steel profiles, pipes, and other machined elements. With a load capacity of 2000 kg and a robust steel construction equipped with seven wide rollers, it ensures reliable and smooth material guidance even in the most demanding production environments. Main advantages of the machine Load capacity up to 2 tons – ideal for handling heavy metal components. Steel bearing-mounted rollers – provide smooth operation under high loads. Precise height adjustment – adjustable from 545 to 855 mm, allowing compatibility with various machines. Modular design – possibility of extending and connecting multiple conveyors into longer roller tracks. Wide working surface – rollers with a working length of 470 mm allow handling of wide components. Construction and technology The conveyor is equipped with 7 steel rollers with a diameter of 90 mm, mounted on precision rolling bearings. Every structural component – from the frame to the support legs – is made of reinforced steel, ensuring safe operation under heavy loads and maintaining overall construction stability. The height adjustment system is based on locking screws and perforated guides, providing quick and rigid positioning. Precision and work efficiency The use of bearing-mounted rollers and a rigid welded construction ensures low rolling resistance, minimizing the risk of jamming and uneven movement. Thanks to the wide rollers and high load capacity, this roller conveyor is ideal for cutting, drilling, or milling heavy components. Applications The 2-meter roller conveyor is suitable for use in: Dcsdsvu S Ecspfx Aixjk Metalworking plants Production and technological lines Band saw workstations Portal milling machines Any applications requiring stable support of workpieces during machining processes Standard equipment 7 bearing-mounted steel rollers Robust steel supporting structure Height adjustment system 545–855 mm Feet with mounting holes Technical specifications – 2 m Roller Conveyor Parameter Value Roller diameter 90 mm Working roller length 470 mm Total roller length 500 mm Number of rollers 7 Conveyor length 2000 mm Conveyor width 600 mm Height adjustment range 545–855 mm Maximum load capacity 2000 kg

Condition: new, Year of construction: 2026, functionality: fully functional, Roller Conveyor 1 m with 2000 kg Load Capacity The 1 m roller conveyor with a load capacity of 2000 kg is a specialized roller feeder designed for intensive material handling tasks under industrial load conditions. Thanks to its reinforced steel construction and bearing-mounted rollers with a diameter of 90 mm, it ensures safe and stable guidance of even the heaviest metal components with large cross-sections. It is ideally suited for use with band saws and heavy-duty cutting centers where precise positioning of materials is required. Main advantages of the machine High load capacity of 2000 kg – designed for handling extremely heavy workpieces. 4 steel bearing-mounted rollers – ensure smooth and accurate material movement. Large rollers with a diameter of 90 mm and a length of 470 mm – suitable for transporting wide and heavy components. Height adjustment range of 545–855 mm – compatibility with various types of machine tools and workstations. Modular design – possibility of connecting multiple conveyors into a complete technological line. Construction and technology The foundation of this roller conveyor is a welded steel frame, additionally reinforced to increase resistance to bending and twisting. The steel bearing-mounted rollers are installed in precision-made supports, preventing axial play and ensuring long service life. Each section features independent height adjustment, allowing the conveyor to be adapted to various types of machine tools and workstations. Precision and work efficiency Thanks to the use of large-diameter rollers and a durable supporting structure, the roller conveyor guarantees precise guidance of heavy and large-sized components. It reduces the risk of disruptions during machining operations and improves process repeatability. The possibility of connecting multiple modules allows the creation of an efficient material handling system for raw or processed components. Applications The roller conveyor is suitable for: Heavy steel construction plants Profile cutting and prefabrication lines Metalworking workshops and serial production facilities Cooperation with band saws and gravity-fed cutting machines Standard equipment 4 steel bearing-mounted rollers 90 × 470 mm High-rigidity steel frame Individual height adjustment system Technical specifications Parameter Value Dcedpfx Aijvu S Ausxek Roller diameter 90 mm Working roller length 470 mm Total roller length 500 mm Number of rollers 4 Conveyor length 1000 mm Conveyor width 600 mm Working height 545–855 mm (adjustable) Maximum load capacity 2000 kg

Condition: new, Year of construction: 2026, The CORMAK HBS260 metal bandsaw for cutting pipes, profiles and bars is widely used in locksmith and metalworking workshops where precision, quality and cutting speed are essential. The model features a pivoting arm from 0° to 60°. The frame design ensures precise and quiet operation. It has a removable chip tray for easy cleaning! Machine characteristics The CORMAK HBS260 horizontal metal bandsaw with a pivoting arm enables cutting perpendicular to the material axis and at any angle within the range of 0° to 60°. The material can be fed manually or by any mechanical device, while the tool feed operates automatically. The blade guides are fitted with special carbide plates and bearings, which have a significant influence on the blade’s guidance, service life, straightness, accuracy and cutting quality. The carbide guidance system greatly reduces machine and blade wear. The machine is equipped with an efficient coolant pump with a closed coolant circulation system. The saw arm is made from a single cast-iron element, and with the use of a 27 mm wide cutting blade, it enables series cutting of both profiles and solid materials. The vice is mounted on an adjustable base and features a quick-clamping system. The blade guides are fitted with hard metal (carbide) plates and rolling bearing systems. These carbide guides are responsible for the cutting precision and straightness. Dcsdpfx Aioudi Uzoxek The upper part of the base is shaped as a tray for draining coolant and collecting chips generated during the cutting process. The base is fitted with a cast-iron worktable with a pivoting arm and a control panel mounted on a separate arm. In the cutting process, the main cutting motion is the movement of the cutting blade, while the feed is achieved by lowering the arm. The arm lowering speed (cutting speed) is controlled by a hydraulic cylinder. The feed rate is regulated via the saw’s control panel. Two blade speeds are available: 35 and 70 m/min. When the arm reaches its lower position (after the cut), the drive to the cutting blade is automatically switched off. Safety is ensured by blade guards and micro-switches that stop the motor after the cutting cycle or when any guard is opened. Additional protection automatically switches off the bandsaw in the event of blade breakage. Blade size [mm] 2520 x 27 x 0.9 Blade tension mechanical (manual) Blade speeds [m/min] 35, 70 Arm lowering control stepless – hydraulic cylinder Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame swivel [°] 0–60 Power supply 3-phase 400V Main motor power [kW] 1.1 / 1.5 Coolant pump motor power [kW] 0.05 Dimensions with base [cm] 150 x 80 x 140 Weight [kg] gross/net – 210 / 180 kg Additionally 2 M42 saw blades 5L Emulsol ZW580 magnetic chip collector

Condition: used, Technical details: floor-plate length: 2500 mm plate width: 1250 mm plate height: 100 mm transport dimensions LxWxH: 2,53 x 1,25 x100 m Cast steel Dodpowm Ngtofx Aixjck The plates are machined before the T-slot with 75mmx60mm(recessed) Table surface 2530mm X 1245 mm Longitudinal slot: Number: 5 Size:a=32, h=53, b=54, c=23mm Center distance 250mm 2 slots Chamfered 8 through-holes with D=17mm *

Condition: new, Year of construction: 2026, CORMAK Electric Pallet Truck The CORMAK electric pallet truck is an advanced transport solution designed for easy handling of heavy pallets and loads in warehouses, production halls, and other logistics environments. With a 1500 kg load capacity and an electric lifting system, it provides high efficiency, precision, reliability, and improved operator comfort. Main advantages of the electric pallet truck 1500 kg load capacity – enables the transport of heavy loads while maintaining full stability and safety. Electric lifting system – provides smooth and precise lifting of loads up to 190 mm, eliminating physical effort for the operator. Easy maneuvering – the electric drive system ensures quiet and efficient operation without requiring manual force. Speed control potentiometer – allows precise adjustment of travel speed according to working conditions and warehouse traffic levels. “Turtle mode” – enables slower and controlled movement, ideal for precise operations in narrow spaces. Integrated safety systems – electromagnetic brakes, belly safety switch, horn, and protective functions ensure a high level of operator safety. Construction and technology The CORMAK electric pallet truck is equipped with a 24V/20Ah lithium-ion battery, providing up to 3 hours of operation on a single charge and fast charging in only 2.5 hours. This allows the truck to return to operation quickly, increasing productivity and reducing downtime in intensively used warehouses. The truck is fitted with polyurethane wheels with a diameter of 80/210 mm, providing excellent traction, wear resistance, and smooth movement. This ensures stability and comfortable operation, even on smooth warehouse surfaces. Precision and work efficiency The CORMAK electric pallet truck allows precise maneuvering even in crowded working areas. Thanks to the speed control potentiometer, the operator has full control over travel speed, improving safety and reducing the risk of collisions. The “turtle mode” function enables slower and more accurate movement, which is especially useful when working in narrow warehouse aisles, loading ramps, or areas requiring precise positioning. The truck is also equipped with an electromechanical brake, ensuring safe stopping and easy control of movement, even in demanding working conditions. Standard equipment 24V/20Ah lithium-ion battery Polyurethane wheels with diameter 80/210 mm Electromechanical braking system Speed control potentiometer “Turtle mode” for precise maneuvering Charger included Dodpfx Aioricvdexeck Technical specifications Parameter Value Load capacity 1500 kg Turning radius 1300 mm Fork height when raised 190 mm Fork height when lowered 85 mm Fork length 800 mm Fork width 550 mm Wheel diameter 80/210 mm Battery voltage / rated capacity 24V / 20Ah Li-ion Operating time on full battery Up to 3 h Charging time 2.5 h Drive motor power 0.75 kW Lifting motor power 0.8 kW Brake type Electromechanical Travel speed with/without load 3.5 / 4.5 km/h Weight 130 kg Dimensions 1300 × 550 × 1300 mm

Condition: used, Technical specifications: Working width: 1 Calibrating unit Shaft diameter: 190 mm Dcsdpfx Aieziavzjxjk 2 Grinding unit Height of workpiece: 160 mm Air blowing on the abrasive belt on unit 1/2 Diameter of dust extraction nozzle: 100 mm Electric lifting Digital display Safety switch Main motor power: 18.5 kW Overall dimensions: Length: 1850 mm Width: 1150 mm Height: 1870 mm

Condition: good (used), functionality: fully functional, Automatic stacking unit for destacking battens, boards or long goods in kiln trucks. Manufacturer Makor, type ACA 2. Equipped with 2 transfer arms. Part lengths approx. 1600 - 3000 mm (depending on part thickness), maximum part width approx. 170 mm. Installation length approx. 3000 mm. Weight approx. 1500 kg. Dcsdpfx Aisyxyfkjxjk

Condition: excellent (used), Motor power: 2.02 kW Pneumatic tensioners Pneumatic depth adjustment Shoulder length: 220 cm Djdpfx Ajh Im S Noixsck Working depth: 16 cm

Condition: like new (used), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: ABT 1/2000-8, type of input current: AC, overall weight: 4,200 kg, input voltage: 400 V, input frequency: 50 Hz, The 2 tons/hour Belt Dryer System (model ABT 1/2000-8) is an industrial drying unit manufactured by ASOS PROSES MAKİNA SAN. VE TİC. A.Ş. (Turkey). It is designed for the continuous drying of granular or particulate materials such as pet food, cereals, grains, feed, agricultural products, and similar bulk goods. The system operates indoors on a single production line, 24 hours per day, under ambient temperatures of 5–35 °C and relative humidity between 60–80 %, at sea level. The machine is engineered to reduce moisture content from 28 % to 12 %, with a feed rate of 2,000 kg/h, evaporating 364 kg of water per hour, and delivering a dry output of 1,636 kg/h. It requires 364,000 kcal/h of thermal energy, typically provided by combustible gas, with a drying temperature range of 50–60 °C. Total electrical consumption is 37 kW, with 46.2 kW installed power, powered at 400 V / 3-phase / 50 Hz, and an estimated nominal current of ≈ 78.5 A. Noise levels are below 85 dB(A) at 1 m. The required installation space is 4 m (width) × 10 m (length) × 4 m (height). The Belt Dryer unit has a drying surface of 16 m², a belt width of 2,000 mm, and a length of 8,000 mm. It uses a single-pass polyester belt. Both upper and lower casings are made of galvanized steel with rock wool insulation on heated surfaces. Inspection hatches and instrument sockets are provided on both sides for easy access and monitoring. The system includes a spreader unit for uniform material distribution, a burner chamber (400,000 kcal/h, carbon steel), and a set of circulation and exhaust fans (galvanized steel, direct drive, VSD). Multiple motors (totaling 46.2 kW) drive feeding, mixing, drying, ventilation, and heat exchange equipment. Dsdpfeyb Rpdjx Aixock Control is managed through a floor-standing MCC and PLC cabinet (IP55, 600×4000×2200 mm), equipped with a Siemens S7-1500 PLC, 17" SCADA touchscreen (TP1900), Profinet communication, and ABB/Danfoss VSDs. All signal and power cables and galvanized trays are included, along with galvanized structural supports. The system is suitable for industrial-scale drying operations in the food, feed, agricultural, and processing industries, offering stable performance, low noise, and automated control. It is built for durability with galvanized steel construction, easy maintenance access, and optional on-site erection and commissioning by ASOS engineers. Delivery time is typically 10–12 months from advance payment, and the equipment is guaranteed for one year against material and manufacturing defects.

Condition: good (used), functionality: fully functional, Year of construction: 2012, Motorized Swivel Bending Machine Mfg. SCHRÖDER Type: MAK 4 EVO 3200/6.0 UD Year: 2012 Technical Data Manufacturer: SCHRÖDER Type: MAK 4 EVO 3200/6 UD Year of manufacture: 2012 Working length: 3200 mm Capacity: 6 mm Upper die stroke: 850 mm Upper die geometry: 180° Bending center adjustment: 100 mm Dimensions: approx. L 6.45 x W 2.65 x H 2.75 m Machine weight: approx. 20.6 t Accessory weight: approx. 3.4 t Equipment - Up’n Down bending die, automatically controlled by POS 3000 - Upper die tool clamping, hydraulic - Bending die tool clamping, hydraulic - Motorized central crowning - Motorized bending die adjustment, program-controlled - Bending center optimization via bending center adjustment - Foot switch - Protection of operation from the rear, controlled by a light curtain and safety PLC - Safety package EVOLUTION UD with tool changer incl. safety fence - Speed optimizer Z-axis drive (max. axis speed: 120 mm/s) Control system: POS 3000-3D graphic control View of product and machine in 3D – display Radius-Step-Bending function Stop system Positioning stop 10 - 3400 mm in U-shape with 4 sectors (850/1700/2550/3400), Panel for individual positioning of the control, pneumatic lowering of the stop fingers, steel balls in the support table. Angle stop left and right 1500 mm. The support plates are divided and can be removed individually to create the Dcodpfozrvdgjx Aixek necessary space for existing counter-bends. - 2 pneumatically lowerable angle stops mounted on the frame - Front stop function of the bending die for accommodating bending rail finger segments incl. 2 finger segments matching the bending rail Fully automatic tool changer Tool changing portal for upper die tools with hydraulic tool clamping (total 7 axes) for maximum upper die tool height of 400 mm, two asynchronously movable tool changers each with three gripping units Upper die tool Tools WZS 2000, approx. 1000 N/mm2 tensile strength • Tool set for automatic tool changer, upper die Goosefoot set h= 180 mm incl. corner pieces left and right. Bending die tools Tool system for the bending die WZS 3000, approx. 1000 N/mm2 tensile strength Bending rail "A", segmented, stepped, b= 15 mm, h= 101 mm No. 1 - L = 2 x 25, 30, 35, 40, 45, 50 = 225 mm No. 2 - L = 14 x 200 mm Bending rail "A", segmented, stepped, b= 20 mm, h= 101 mm No. 1 - L = 2 x 25, 30, 35, 40, 45, 50 = 225 mm No. 2 - L = 14 x 200 mm 2 finger segments for front stop matching bending rail b= 20 mm •Bending rail "A", segmented, b= 30 mm h= 101 mm No. 1 - L = 2 x 25, 30, 35, 40, 45, 50 = 225 mm No. 2 - L = 14 x 200 mm 2 finger segments for front stop matching bending rail b= 30 mm Lower die tools Lower die rail with recesses segmented, same radius as upper die tool b= 117 mm h= 40 mm Total length 3.240 mm, divided into 4 x 500, 2 x 620 mm All information is without guarantee. A demonstration under power is possible at any time by arrangement.

Condition: good (used), Year of construction: 1989, sheet width 2520 mm plate thickness 2.5 mm bending angle max. 135 ° stroke of upper beam 250 mm adjustment UW 80.0 mm back stop - adjustable ca. 925 mm work height max. ca. 935 mm total power requirement 6.0 kW weight of the machine ca. 2500 kg. dimensions of the machine ca. 3600 x 1650 x 1425 mm good condition (!!) with 1x split set of goat foot tools Equipment: - dynamic, powerful motorized folding machine - SCHRÃ?DER NC control unit "POS 800" with LCD display * Fast programming of individual parts - Control panel, front right - NC electro-motorized back gauge * with rear sheet support surface - Manual lower beam adjustment - 1x free-moving double foot switch - 1x extra bending machine .. B = 10.0 mm * built-in bending rail with .. B = 25.0 mm Djdpfx Ajy Raiyoixock - 1x split set of goat foot tools ... H = 130 mm * a pointed rail is installed - Operating instructions

Condition: used, mileage: 225,315 km, power: 180 kW (244.73 HP), first registration: 04/2002, empty load weight: 8,500 kg, maximum load weight: 9,500 kg, overall weight: 18,000 kg, tire size: 315/80R22.5, axle configuration: 4x4, wheelbase: 3,900 mm, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel, number of seats: 2, Equipment: ABS, all wheel drive, cabin, crane, differential lock, hydraulics, trailer coupling, Vehicle location: Bovenden, steel superstructure, chassis house, 1x air seat, rear window, electric mirror, electric window right, sun visor, cruise control, switch 8, ABS (anti-lock braking system), traction control system (ASR), differential lock, work lights, rotating beacon, storage box, leaf suspension, air/light/hydraulic towbar, AHK air+light, lashing eyes, U-protection, pendulum flaps, roof hatch, crane behind house, emergency stop, grapple control, foldable, 2-point mechanical support, 1x hydr. extension Djdovhlx Nepfx Aixock Wheelbase: 3900 mm Superstructure: Atlas 85.1 A1 crane with hydraulic extension and grab control. Winter service preparation! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .