Used Behringer Hbp 500 A for sale (76,532)

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2023 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application - Pre-melter for PUR glues - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine Fsdpfoz Ikq Djx Aivepn - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 - Edge sequence control - change-over in the gap Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand ‘Keyence VL-500’ 3D coordinate measuring machine Items for sale: 1x Keyence VL-500 with the following features Fpodpfxjy Iaa Te Aiven Includes software Includes additional software Includes a laptop for operation Includes a calibration plate Ready for immediate use Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). The unit has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the unit during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: good (used), Year of construction: 2000, functionality: fully functional, Very robust lathe with a rigid machine bed. L + Z hollow spindle lathe Manufacturer: Grutzpe Model: 2000 / 500 Super AT Turning diameter: 1000 mm Distance between centers: 530 mm Fjdsz D Dt Dopfx Aivjpn Hollow spindle diameter: 140 mm Distance between centers above the compound slide: 530 mm Turning length: 2000 mm Bed width: 420 mm Chuck diameter: 315 mm Bridge Dimensions: 6500 x 2200 x 2000 mm Weight: 10,000 kg Accessories: Various Further details: see images

Condition: good (used), Year of construction: 2012, CNC Turning / Millingcenter Machine type: DMG CTX beta 500 V6 Control: Siemens 840 D Shopturn Year: 2012 Working hours: 42.067 h Spindle running time: 20.209 h SPECIFICATIONS Max. turning length: 500 mm Turningdiameter: 410 mm Max. swing over bed: 700 mm Spindle bore: 87 mm Bar capacity: 77 mm C-Axis: 0,01° Main Spindle: ISM 76 Max. revolution: 5.000 rpm Spindle power: 25 / 34 kW Torque: 280 Nm Collet chuck: Hainbuch Spantop Nova 65 Subspindle: ISM 52 Max. revolution: 5.000 rpm 3-jaw chuck: Berg KHL 200 mm Travel Y-Axis: mm Amount of turrets: 1 Tool: VDI 40 Driven Tools: 12 revolution driven tools: 4.000 drive power driven tools : 11,3 kW Equipment Chip conveyor Short Bar Loader: LNS QLS 80 S2 Direct linear scales: X,Y Fpsdpfoz D Ug Iex Aivjn High pressure pumps Toggle filter Tool setter

Condition: good (used), Renz Mobi 500 Semi-Automatic Spiral Binding Machine Perfect condition, manufactured in 2021. Only 3,636 bindings used. Semi-automatic spiral binding machine from the German company RENZ: • Controlled by a touchscreen display • The fastest setting changes for various work formats in this class via an electronic panel, which is particularly important for small, frequently changing runs • Spiral diameter adjustment from 1/4″ to 1 1/4″ (6.9 to 32.0 mm) using a knob • KA-300 Hanger Feeder • Quiet operation. The machine does not require a compressor. • Working width: 105-500 mm • Mobile, easy to move • Includes a receiving table • No special operator training required 230V power supply Fpedpfezur Hiex Aivjn Weight: 550 kg

Year of construction: 2022, condition: used, KOLBUS Box Line Assembler BLA 500 year 2022 For assembling box cases and boxes or box cases and flat blanks. Overview: BLA 500 box line assembler CP 500 blank placing module BP 200 twin box placing module (year 2019) BP 500 box placer Fedpez E Npajfx Aivepn SG 500 side gluer Configuration: BLA 500 box line assembler · copilot system with touch screen · device for gluing box cases · servo-controlled drive technology based on Siemens technology · infeed with cardboard feeder CF 500 · delivery via conveyor belt Technical specifications: mechanical speed: up to 40 cycles/min box case width max.: 735 mm box case width min.: 205 mm box case height max.: 525 mm box case height min.: 140 mm box case thickness max.: 4,0 mm box case thickness min.: 1,5 mm CP 500 blank placing module · module for placing flat blanks on glued box cases Technical specifications: flat blank width max.: 800 mm flat blank width min.: 200 mm flat blank height max.: 800 mm flat blank height min.: 200 mm BP 200 twin box placing module (year 2019) · module for placing two boxes on glued box cases Technical specifications: box width max.: 170 mm box width min.: 100 mm box height max.: 42 mm box height min.: 20 mm box length max.: 250 mm box length min.: 100 mm cardboard thickness max.: 4,0 mm cardboard thickness min.: 1,5 mm spacing between boxes max.: 405 mm spacing between boxes min.: 140 mm BP 500 box placer · module for placing boxes on glued box cases Technical specifications: box width max.: 310 mm box width min.: 65 mm box height max.: 170 mm box height min.: 20 mm box length max.: 400 mm box length min.: 130 mm cardboard thickness max.: 4,0 mm cardboard thickness min.: 1,5 mm SG 500 side gluer · module for raising and gluing the sides of the box case to the box Technical specifications: box case height max.: 405 mm box case height min.: 140 mm

Condition: new, Year of construction: 2022, You have a Behringer saw and your control panel is defective, the membrane keypad is broken, but the machine is still too good to replace. The BT 41 is a very common control panel and we can repair it for you! Please contact us. Fpjdjtv Ip Iepfx Aivsn

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 350 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: SmoothG, total height: 2,840 mm, total width: 1,900 mm, overall weight: 7,100 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 30, tool weight: 8,000 g, product length (max.): 3,060 mm, number of axes: 5, This 5-axis Mazak VARIAXIS J-500/5X was manufactured in 2020. It features a maximum spindle speed of 18,000 rpm and a rapid traverse rate of 30,000 mm/min. The machine includes a tool magazine capacity of 30 tools and a robust table size of 500 x 400 mm. If you are looking to get high-quality machining capabilities, consider the Mazak VARIAXIS J-500/5X vertical machining centre we have for sale. Contact us for further details. • CNC control: MAZATROL SmoothX with 19-inch colour touchscreenWorking capacity and travels • A-axis tilt: -120° to +30° • C-axis rotation: ±360° • A/C indexing increment: 0.0001° • Rapid traverse X/Y/Z: 30,000 mm/min • Max cutting feed X/Y/Z: 30,000 mm/min • A-axis index time: 0.6 s per 90° • C-axis index time: 0.55 s per 90° / 1.05 s per 180°Table and clearances • Tilting/rotary table (A/C axes) • Table size: 500 × 400 mm • Table with T-slots (as per final configuration) • Spindle nose to table surface (table horizontal): 50–560 mm • Spindle nose to table centre (table vertical): 40–550 mmSpindle • Spindle chiller with 16 L cooling oil tank • Programmable spindle orientation in 1° incrementsTool magazine and ATC • ATC with recovery function; digital magazine display and external operating panel • Tool selection: fixed addresses with automatic shortest-path selection • Pull stud: Yamazaki ANSI • Max tool length: 300 mm • Max tool diameter with adjacent tools: 90 mm • Max tool diameter with adjacent pockets empty: 130 mm • Chip-to-chip time: 6.20 sMeasuring and probing • Renishaw RMP600 radio workpiece probe • MAZA-CHECK system • Automatic tool length measurement and tool breakage detection • G37 automatic tool length measurement • Absolute positioning systemCoolant and chip management • Through-tool high-pressure coolant: approx. 15 kgf/cm² (≈14.7 bar), approx. 35 L/min • Coolant tank: 300 L • Coolant washdown system and manual washdown gun • Cooling for X/Y/Z ball screws • Workpiece air blastControl and software • MAZATROL SmoothX CNC • EIA/ISO programming package • Simultaneous 5-axis control • Additional 5-axis machining package for SmoothX • 3D coordinate rotation • Smooth synchronous tapping • G00 Slope Constant (rapid optimization) • Smooth restart • Tilted machining plane • Inverse Time Feed • Extended work offsets: 300 pairs • Variable macros: 600 variables • High-speed machining and smoothing • Geometric compensation for rotary axes • Interfaces: USB, LAN, SD cardConstruction, safety, and other features • Electronic handwheel • Three-colour signal tower • Automatic machine power on/off and warm-up • Roller linear guideways • Full enclosure with top cover; interlocked operator door Fpedpfoz Iqgrox Aivsn • Work area lighting • Intelligent Safety Shield (ISS) • CE marking Additional equipment • CROWTHER right-side hinged-belt chip conveyor (for steel machining) • GX500 mist extraction unit with extraction preparation • European-market power transformer • Machine installation kit • Polish manuals and safety labels Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Condition: good (used), Year of construction: 2011, spindle diameter: 40 mm, number of spindles: 7, Weinig Unimat 500 Year of manufacture: 2011 Planing width: 230 mm Planing height: 120 mm Spindle diameter: 40 mm Infeed table: 2,000 mm Number of rollers in the table: 2, driven with 150 mm width Feed rate: 5 - 30 m/min Feed motor: 5 kW Memory function: 3 sets of radially CNC-controlled adjustments for spindles 3, 5, and 6 Spindle arrangement: Bottom: 7.5 kW Right: Left: 7.5 kW Fedpfx Aiozzv Abjvjpn Right: 5.5 kW Top: 7.5 kW Top: 7.5 kW Bottom: 11 kW

Condition: good (used), Year of construction: 2002, Behringer Eisele VA-0-250-NC Circular saw TECHNICAL DATA Sawing range: 90 ° Saw blade diameter: 25 cm Fpsdpfx Asvdk A Ejivon Bore: 40 mm Cutting range: 10-75 mm Cutting length: 5-900 mm Speed: 2800 rpm Cutting speeds: 26/52/103/206 SFPM or 0.13/0.26/0.52/1.05 m/s Feed speeds: 0-40 mm/sec NC axis: Yes Dimensions: 190 x 127 x 190 Weight: 1300 kg We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: excellent (used), For sale: Bernardo KFM 500 M edge chamfering machine, designed for precise chamfering and deburring of parts made of steel, stainless steel, aluminum, and other metals. This machine is ideal for preparing parts for welding, removing sharp edges, and creating even chamfers. Its robust construction and adjustable chamfering angle ensure accurate and repeatable machining. The machine is sold with the operating manual and a set of cutting blades, as shown in the pictures. Technical data: Manufacturer: Bernardo Country of manufacture: Austria Model: KFM 500 M Year of manufacture: 07/2019 Machine number: PWA-190707 Type: edge chamfering machine Motor power: 0.55 kW Power supply: 400 V Frequency: 50 Hz Rated current: 1.48 A Recommended protection: C16 Weight: 33 kg Application: The device is designed for: chamfering edges, deburring parts, preparing material for welding, machining steel, stainless steel, and aluminum, creating precise chamfers for welds. Fpedpfxjziww Ne Aivon Included: Bernardo KFM 500 M chamfering machine, operating manual, set of cutting blades (shown in the pictures), other items shown in the pictures. Condition: The device is used and in good visual condition. Normal signs of wear and tear are visible, consistent with its use. The machine is sold exactly as it is and with all the components shown in the pictures.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, General overhauled OPS Ingersoll Gantry 500 Wire EDM machine – in top technical and optical condition. The machine has been comprehensively and professionally overhauled in our workshop and is in very good condition both technically and visually. During the overhaul, the machine was disassembled by over 70%. All relevant wear parts were carefully inspected and replaced if necessary, including ball bearings and drive spindles. Subsequently, a complete geometric measurement, alignment, and additional check using a laser measuring system were performed. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and compressed air hoses, were completely replaced. In addition, the machine was completely repainted and is now in very good cosmetic condition. The generator and control unit were cleaned and technically inspected. The air conditioning unit of the generator was also cleaned to ensure reliable cooling and stable operation. Finally, the machine was subjected to an extensive erosion test according to the quality and testing specifications of OPS Ingersoll. The machine is immediately ready for operation and is ideal for reliable production. Technical data: Ingersoll (OPS Ingersoll) Wire EDM machine OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture 2009 Control system EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld - multifunctional handheld device Manual erosion with Powertec Handheld High-speed jump max. 18 m/min Generator output 60 amps, EAGLE Powertec Travel ranges (X, Y, Z) 525 x 400 x 450 mm Electrode changer 20-position pick-up disc changer Work tank (W x D x H) 770 x 670 x 440 mm Work table (W x D) 750 x 650 mm Load capacity 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special equipment: Fpsdpeyrqpfsfx Aivjn Linear measuring system in all axes (Z as standard) 30.09

Condition: used, Year of construction: 2010, machine/vehicle number: 10A46 & 10A47, functionality: limited functionality, power: 110 kW (149.56 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 160 mm, cutting width (max.): 650 mm, total length: 20,000 mm, total width: 2,000 mm, total height: 2,100 mm, table height: 850 mm, LIMITED-TIME OFFER. Manufactured in 2010 by the renowned Italian brand A. Costa Righi, this professional woodworking setup, comprising the LEONE heavy-duty multi-ripsaw and the MAXI-CUT cross-cutting machine, is currently available in good to moderate overall condition, although it is currently stored partially disassembled in our warehouse. Fpodozxx Dvjpfx Aiven

Condition: used, Saw BEHRINGER HBE 321 A Dynamic Fpjdpfx Aox Tvkxjivjn

Condition: used, Year of construction: 2016, Marel labeling machine Fsdpfx Ajxnkh Sjivopn - Concept 500 - Top labeller More photos and full specifications: /

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 641/302, total width: 600 mm, total length: 800 mm, total height: 1,300 mm, overall weight: 120 kg, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the specified timeframe between November 16, 2026, and November 26, 2026! MACHINE DETAILS Operating voltage: 380 V Fodpfoz Il Ikjx Aivopn Frequency: 50 Hz Rated current: 30 A Connected load: 8.1 kW Dimensions & Weight Dimensions (L x W x H): 800 x 600 x 1,300 mm Weight: 120 kg External Reference: Steinbach & Holler - Lot 62

Condition: good (used), Renz Autobind AB 700 + KAS 500 Semi-Automatic Spiral Binding Machine Machine in very good condition, ready to operate. Efficient semi-automatic machine for the production of calendars, notebooks, and other metal spiral-bound products. Fast operation Spin diameters range from 3/16″ to 1 1/8″ Working width up to 700 mm Crimping thickness approx. 23 mm Capacity up to 1200 cycles/hour The semi-automatic machine unwinds the spiral from the spool, counts the stitches, cuts the spiral to the pre-set stitch count, and transfers the spiral section to the crimping area. Fpodpfxjz Dtbko Aiven The operator places the pre-perforated calendar on the table. The calendar is automatically transferred to the crimping area by pressing the pedal. Includes a KAS 500 hanger feeder Power supply: 230V + compressed air Weight: 615 kg.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, overall weight: 1,900 kg, Emmegi Twin Electra 500 double miter saw with 3 CNC-controlled axes Cutting length 5000 mm – longer cuts are also possible in automatic mode, with automatic repositioning of the saw up to 10000 mm. Refurbished/like-new double miter saw with saw blades D=500 mm. The machine can be motor-driven to swing from 135 to 22.5 degrees and has an indexing device. Software options for short cuts, macros, oversized cuts, miters, and indexing cuts are also available for this machine. Data transfer is possible (Orgadate; Schücal... etc.). Accessories: Traveling roller conveyor, tensioners on the roller conveyor, tensioners from above and from the front, automatically extending profile support between the heads. Fjdpfxsz Adyds Aivspn

Condition: good (used), Year of construction: 2004, Stedler SAM-BA-MAT E 500 Shrink Wrapping Machine, AM-BA-MAT E 500 Shrink Wrapping Machine Functional Description Fjdpfotzbkkox Aivopn The machine is used for individually or collectively wrapping packages with polyethylene shrink film. * Operating principle: Semi-automatic and pneumatic. * Process: The product is manually fed in via a format slide; all subsequent steps (banding, further transport into the shrink tunnel) are carried out automatically. * Sealing process: A continuously heated safety sealing device separates and seals the film. A Teflon cloth prevents the film from sticking to the sealing blade. Placing the film rolls * Positioning: The rolls are placed on pairs of support rollers, both above and below. * Adjustment: Adjustment rings limit the film laterally with an allowance of approximately 1–2 mm (adjustment using an Allen key). * Preparation: The film ends are guided through the sealing device. By pushing the infeed carriage forward and backward once, the separating sealing process is pneumatically initiated, creating the so-called film curtain. * Film material: Processes two rolls of flat shrink film made of polyethylene. * Film thickness: The recommended standard thickness is 40 µm (micrometers). * Film alignment: The rolls are fixed with adjustment rings, with a lateral play of 1–2 mm to be set. * Film width: The maximum width is 210 mm. * Control: The machine operates pneumatically and is activated via a manual slide. Machine data Manufacturer: Stedler Type: SAM-BA-MAT E 500 Operating voltage: 230 V Connection value: 0.75 kW Operating principle: Semi-automatic and pneumatic [Image content] Dimensions (L x W x H): 1500 x 1170 x 1300 mm Year of manufacture: 2004 Sealing & Film specifications Maximum temperature: 250 °C Sealing readiness: approx. 1.5 s Film material: Flat shrink film made of polyethylene (PE) [Image content] Film width: up to 210 mm Film thickness: 40 µm (micrometers) More items in other sizes – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2008, functionality: fully functional, The Bruderer BSTA 500-110B is a 500 kN Swiss-built high-speed stamping press, fitted with a BSV 75T double servo feeder for precision two-track strip feeding. Capable of up to 750 strokes per minute with B2 touch-screen control. Including sound insulating cabin. Nominal force: 500 kN (50 tons) Year of manufacture: 2008 Stroke rate: 100–750 spm (variable) Adjustable stroke: 19 / 25 / 34 / 43 / 51 / 57 / 64 mm Ram height adjustment: 64 mm Press table area: 1080 x 650 mm Fpsdpfx Aiezh Nnwjvon Control: B2, IPC-based touch-screen press control, programmable memory for fast retooling BSV 75T DOUBLE SERVO FEEDER Type: tandem dual-feed servo unit, independently controlled tracks Max. strip width: 70 mm per track Max. material thickness: 2 mm Feed length: variable, freely programmable Feed angle: variable Pilot release angle: variable No clamping/gripper bars — strip held by driven feed rollers during stamping Designed for parallel advancing of two strips or feeding pre-profiled/pre-stamped strip

Condition: good (used), GURUTZPE second hand lathe Brand: GURUTZPE Fjdpfx Ash Ryfhoivepn Model: Super-A 3000/500 No.: 232 Distance between points: 3000mm Cane pitch: 325mm Center height: 500mm Maximum turning diameter: 1400mm Maximum diameter on bench: 1000mm Maximum diameter over trolley: 740mm Speeds: 16 Visualizer: FAGOR Model: NV 300T It includes: - Dish - Lunettes

Condition: good (used), Tranklein BRM 500 Book block rounding machine The machine is in very good condition, fully serviced and ready to use. Model with electric book thickness adjustment. Technical specifications: Fpjdpfx Aiezw Raaevon Maximum working size: 500mm Maximum book thickness: 120mm Speed: 300 cycles/h Power supply: 400V Weight: 300kg Easy to use, quick to set up.

Condition: new, functionality: fully functional, Carton Erector Advanced 400 Fully Automatic Net Price: €24,500 Features of the System: 1. Modern design with robotic arm 2. Active servo-controlled 90⁰ carton folding 3. Single magazine carton feed 4. Bottom closure with adhesive tape 5. Five servo drive systems 6. Steel frame construction 7. HMI control panel 8. Standard operation from left to right, available in both directions 9. Documentation in the local language Technical Specifications: 1. Product length: L145–400 mm (up to 650 mm on request) 2. Product width: W80–350 mm (up to 500 mm on request) 3. Product height: H150–350 mm (up to 500 mm on request) 4. Packing speed: 5–30 cartons/min 5. Maximum tape width: max 48 mm (other sizes on request) 6. Supply voltage: 1Ph. 220V 50Hz 7. Power consumption: approx. 2.1 kW 8. Machine weight: approx. 620 kg 9. Machine dimensions: approx. 2450 x 1380 mm 10. Air consumption depends on packing speed Carton Erector Advanced 500 Fully Automatic Net Price: €27,500 Features of the System: 1. Modern design with robotic arm 2. Active servo-controlled 90⁰ carton folding 3. Single magazine carton feed 4. Bottom closure with adhesive tape 5. Five servo drive systems 6. Steel frame construction 7. HMI control panel 8. Standard operation from left to right, available in both directions 9. Documentation in the local language Technical Specifications: 1. Product length: L275–500 mm (up to 650 mm on request) 2. Product width: W140–400 mm (up to 500 mm on request) 3. Product height: H140–400 mm (up to 500 mm on request) 4. Packing speed: 5–30 cartons/min 5. Maximum tape width: max 58 mm (other sizes on request) 6. Supply voltage: 1Ph. 220V 50Hz 7. Power consumption: approx. 2.1 kW 8. Machine weight: approx. 620 kg 9. Machine dimensions: approx. 2850 x 2000 x 1400 mm 10. Air consumption depends on packing speed Carton Erector Advanced 650 Fully Automatic Net Price: €29,900 Features of the System: 1. Modern design with robotic arm Fpedpjya Dh Defx Aivsn 2. Active servo-controlled 90⁰ carton folding 3. Single magazine carton feed 4. Bottom closure with adhesive tape 5. Five servo drive systems 6. Steel frame construction 7. HMI control panel 8. Standard operation from left to right, available in both directions 9. Documentation in the local language Technical Specifications: 1. Product length: L285–650 mm 2. Product width: W280–500 mm 3. Product height: H150–500 mm 4. Packing speed: 5–25 cartons/min 5. Maximum tape width: max 75 mm 6. Supply voltage: 1Ph. 220V 50Hz 7. Power consumption: approx. 2.35 kW 8. Machine weight: approx. 620 kg 9. Machine dimensions: approx. 2920 x 2100 x 1500 mm 10. Air consumption depends on packing speed

Condition: used, Year of construction: 2009, Saw blade diameter: 400 mm Cutting area flat 90°: 200 x 120 mm Sawing area flat 45°: 140 x 120 mm Sawing area flat: 30°100 x 100 mm Cutting range round 90°: 140 mm Sawing range round 45°: 140 mm Sawing range round 30°: 110 mm Feed length electronically adjustable: max. 800 mm Fpedpfx Asygkvnsivjn Coolant pump / minimum quantity spray device Hydraulic material tension Hydraulic material feed Weight: approx. 1300 kg

Condition: used, machine/vehicle number: 10000886, functionality: fully functional, empty load weight: 1,600 kg, Technical data Working range - Æ/ flat at 90° 800 mm / 1300 mm x 750 mm Working range - Æ / flat at 75° + hpr. 800mm / 1150mm x 750mm Working range - Æ / flat at 60° + hpr. 800mm / 1000mm x 750mm Working range - Æ / flat at 45° left 600 mm / 800 mm x 600 mm Smallest material dimension Æ / flat 30 mm / 20 mm x 20 mm Smallest cutting length (90°) 35 mm Cutting speed range 17 - 120 m/min System pressure event. belt tensioning 95 bar Belt drive power 11 kW Hydraulic pump motor power 5.5 kW Cooling pump motor power 0.12 kW Power supply motor 0.09 kW Total power input - approx. value approx. 28 kW Voltage 400 V, 50 Hz Control voltage / voltage at hydraulic valves 24 V = (DC) Current rating approx. 38 A Protection 58 A Cable cross-section min. 4 x 16 mm² Fpjdpfowqlltex Aiven Dimension of saw blade see title. page Weight (net) 1600 kg Mat flow height - working height 830 mm Length x Width x Height see base plan