Used Bastra Brewing Boiler for sale (732)

Condition: good (used), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, ram plate width: 1,600 mm, ram plate length: 5,000 mm, Equipment: CE marking, - Bed dimensions: 5000 x 1600 mm Gbodpez Iwucefx Aivju - Movable upper bed - Perforated steel beds - Oil-based heating system - Integrated 77 kW boiler - Complete with a loader featuring a pusher and unloading bed - 12 cylinders - 14 side cylinders - Separate control panel with PLC Machine available immediately.

Condition: used, Year of construction: 2011, Wood chip boiler, Agroforst AVR, 1000 kW, stepped grate – designed for poor fuel quality, manufactured in 2011, includes hot water system, pneumatic cleaning system, hydraulic insertion mechanism, multi-cyclone separator, ash removal system with screw conveyor, and control system. The insertion chute is leaking and losing water, but can be repaired. The system is otherwise fully functional. It is being sold due to an increase in required output. Disassembly can be included as part of the offer. Gbjdpfovgf Ibex Aivju

Condition: used, Year of construction: 2015, operating hours: 50,000 h, type of input current: three-phase, input voltage: 400 V, rotational speed (max.): 60,000 rpm, fuel: domestic gas H, type of cooling: air, nominal power (apparent): 999 kVA, input frequency: 50 Hz, input current: 1,444 A, Equipment: documentation/manual, Used natural gas-fired combined heat and power plant for electricity and industrial steam production. Main equipment: • Capstone C1000: five C200 microturbine modules, each rated at 200 kW; electrical output of the complete package: 999 kWe; 400 V / 50 Hz; grid-parallel operation; common acoustic enclosure and control system. • APROVIS waste heat steam boiler: rated production of 2,000 kg/h of saturated steam at 6 bar(g); maximum allowable pressure 9 bar(g); equipped with two economizer stages for heat recovery. • Reinhard Simon CKO501G supplementary duct burner: 500 kW, for additional exhaust gas heating upstream of the boiler. • BIO-KOMP fuel gas booster compressor: 30 kW, maximum flow 340 Nm³/h, discharge pressure 6 bar(g). The plant has been regularly maintained under a maintenance contract, with components replaced in accordance with the maintenance schedule. One of the five turbine modules is currently non-operational. Operating hours: T1: 53,191 h; T2: 50,891 h; T3: 51,628 h; T4: 52,691 h; T5: 49,487 h. The pressure equipment has an inspection certificate issued by an accredited pressure equipment inspection body. Technical documentation is available. Inspection, price and collection terms are subject to agreement. Gjdpfsz I T Ekox Aivjbu

Condition: ready for operation (used), Year of construction: 2019, operating hours: 30,745 h, functionality: fully functional, overall weight: 2,700 kg, power: 388 kW (527.53 HP), type of input current: three-phase, number of chambers: 3, Equipment: documentation/manual, We offer this ready-to-use Lauber L-ENZ 370 drying system, manufactured in 2019. – professional wood dryer, 388 kW + 3 drying containers Technology from the German manufacturer LAUBER Trocknungstechnik, manufactured in 2019, serial number 41199. The equipment is suitable for utilizing excess heat from a boiler, biogas plant, cogeneration unit, biomass boiler, or other heat source. Technical parameters: - Manufacturer: LAUBER Trocknungstechnik - Type: L-ENZ 370-4 - Serial number: 41199 - Year of manufacture: 2019 - Thermal output: approx. 388 kW - Fan: 11 kW - Power supply: 400/230 V, 3~NPE, 50 Hz - Automatic LAUBER control - Touchscreen control panel - Fan frequency inverter - Circulation pump control - Heat exchanger - WILO circulation pump - Complete electrical installation and switchgear - Complete technical documentation The technical documentation states a thermal output of 388 kW, operating temperatures of 90/65 °C for the heating water, and a water flow rate of 15.2 m³/h. The weight of the unit itself is approximately 2,700 kg. Zeichnung_LENZ_370_4_mit_techni… Drying containers The offer includes: 3 × drying container - Volume of one container: 15 m³ - Total capacity: 45 m³ - The containers are designed for drying material using the LAUBER hot-air system. Suitable applications: The technology is particularly suitable for: - 🌲 firewood Gedpfx Aijz I Thrsvebu - 🌲 wood chips - 🌲 wood biomass - 🌲 sawdust - 🌲 other loose wood materials - or other materials depending on the specific drying technology The LAUBER system uses warm air, which is blown through the material being dried in the containers. The manufacturer uses it for drying wood chips, firewood, and other loose materials. lauber-holztrockner.de Dimensions of the main unit Approximately: 4,630 × 2,390 × 2,750 mm Weight approx. 2,700 kg. Condition: The technology is unused and offered for sale. Complete technical documentation is available, including electrical diagrams, technical drawings, and the manufacturer's documentation. Condition: ready to use Type: drying system If you have any questions or require further information, please do not hesitate to send us a message or contact us by phone.

Condition: used, Year of construction: 2016, 2 identical thermal oil boilers for industrial process heat supply are offered. Equipped with: attached burner system, thermal oil piping connections, circulation/pump components, valves and monitoring devices, insulated piping, stainless steel cladding, integrated viewing/inspection area at the boiler front. Inspection possible by appointment. Gsdez Ibx Sopfx Aivebu

Condition: excellent (used), pressure: 13 bar, operating pressure: 13 bar, For sale: a Jumag steam generator with a gas burner. Gbodpfjydq E Dex Aiveu An oil burner can be included upon request. The unit is in very good condition. Type DG 160. Steam output: 160 kg/h. Maximum steam pressure: 13 bar. Delivery available for an additional charge. On-site inspection possible. Please contact us if you have any questions.

Condition: good (used), Year of construction: 1966, Container rotator, boiler rotator, welding rotator, welding rotator, welding device, welding turntable, welding rotator -Manufacturer: Deuma Heaters, Container Rotating Device, Welding Rotating Device -Drive motor: -Load capacity: 14,000 kg -Roller spacing: 440 - 1800 mm -Rollers: Ø 400 mm / 400/60-305Z -Rolling speed: 0.3 to 1.6 m/min Right/Left rotation -Control unit: with hand control and foot switch -Individual components: see photos -Transport dimensions: 2930/12170/H645 mm / 2620/840/H620 mm -Weight: 1800 kg / 1150 kg Gbjdozhtuhjpfx Aivju

Condition: good (used), Year of construction: 1977, Container rotator, boiler rotator, welding rotator, welding rotator, welding device, welding turntable, welding rotator -Manufacturer: Deuma Heaters, Container Rotating Device, Welding Rotating Device -Drive motor: 0.27/2.7 kW -Load capacity: 120,000 kg -Roller spacing: 660 - 3070 mm -Rollers: Ø 600 mm -Rolling speed: 0.006 to 3 m/min Right/Left rotation -Control unit: with manual control -Individual components: see photos -Transport dimensions: 1250/4550/H1010 mm, 1040/3960/H1010mm, 560/1240/H480 mm Gbedsziuzfspfx Aivsu -Weight: 9280 kg

Condition: used, machine/vehicle number: 2020110210, mileage: 92,300 km, power: 100 kW (135.96 HP), first registration: 12/2011, fuel type: diesel, empty load weight: 3,065 kg, maximum load weight: 435 kg, overall weight: 3,500 kg, wheelbase: 3,665 mm, fuel: diesel, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: steel, loading space length: 3,500 mm, loading space width: 2,250 mm, loading space height: 2,300 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), onboard computer, second-hand vehicle warranty, We offer you customized, lightweight box bodies for new or used low-frame chassis in various body lengths. Gbedpfx Aef D Rdtjivju The body and interior fittings are always individually adapted to your specific needs, from function to design. We manufacture ourselves and in Germany. Our many years of experience and our comprehensive service offer you a great deal of flexibility in implementing your idea. Each project has its own ID with us. VW Crafter 2.0l 2011 Euro5 3500 kg First registration: 21.12.2011 Mileage: 92,300 km Fuel: Diesel kW/PS: 100/136 Manual transmission, 6 gears ccm: 1,968 cm³ The sales body is NEW, unused and features a large sales flap across the entire vehicle width, 2 seats, driver's license class B, rear step, LED lights, reversing camera. Box body made of 25 mm GRP sandwich panels, superlight, with an alcove. Rear door, single-leaf, 700 x 2000 mm. Floor made of non-slip industrial flooring R11. Exterior lighting: LED, in accordance with the Road Traffic Act and EU regulations. Interior dimensions LWH: 3800 x 2250 x 2300 mm Side flap WxH: 3570 x 1480 mm Permissible total weight: 3,500 kg Unladen weight: 3,065 kg Interior fittings are NEW!! Left side: Commercial refrigerator with glass door and forced air cooling Base cabinet for countertop appliances with sliding door, 2-burner gas stove 8.5 kW, smooth gas griddle 8 kW, double gas fryer 2 x 8 L 12.5 kW, electric bain-marie 2 kW, wall-mounted hood 2200 incl. extraction, grease drain, flame protection filter, heat protection panel and lighting, gas cylinder cabinet for 4 x 11 kg, pressure regulator, gas line and gas inspection. Right side: Serving table with sliding doors and stainless steel worktop, cash register station 900 with folding cover, 254 L double sink with storage including fresh and wastewater tank, boiler Chalkboard with wooden frame, LED illuminated Additional equipment: Storage space above the sales flap, folding bag storage at the sales opening. 2 LED panels on the ceiling and 3 LED spotlights above the sales counter, dimmable. Plenty of storage space. Standard electrical installation 380 volts/16A, connection socket according to CEE standard, RCD circuit breaker, 16 amp fuse with inspection, 5 double sockets, hygiene package, fire protection package. Price net: 63,920.00 € plus 19% VAT Errors and prior sale excepted.

Condition: used, Year of construction: 1986, Colour: Green Price: On request Feed through press Wemhoner VOF2-400-2 Serial number 13350686 Maximum press dimensions 1500x4400mm Maximum stroke 150mm Press pressure 400T 7.5kW, 380V 10 cylinders diameter 120mm Solid plates aluminum 90mm Top and heated, oil boiler included. Gsdpfx Aowng S Ajivebu With infeed and outfeed conveyor. Transport dimensions: Full normal trailer 13000x2400x2400mm, total weight 25,000kg. - Year: 1986 - Documentation available: No - CE certificate present: No - Serial number: 13350686 - Main motor power [kW]: 7.5 - Press drive: Hydraulic - Max. workpiece length [mm]: 4400 - Max. workpiece width [mm]: 1500 - Max. workpiece height [mm]: 120 - Total stroke [mm]: 150 - Number of stages [pcs]: 1 - Material of press plates: Steel - Number of cylinders [pcs]: 10 - Cylinder diameter [mm]: 130 - Total working pressure [ton]: 400 - Heating boiler present: Yes - Heating type: Oil heated Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Descaling pump, universal suction, pressure and circulation pump Gbsdpfscuauzjx Aiveu -Device: for problem-free descaling -of smaller water systems such as heating coils, gas flow and Circulating heaters, water boilers, etc. -Drive: 220 volts -Max. Delivery rate: 6 l/min -Max. Delivery head: 40 m -Dimensions: 420/420/H410 mm -Weight: 9 kg

Condition: used, Container ZETA Plus with filter Gbjdpfx Aisb Tfw Novsu Model: 12 ZPC 2 Material: 316 L Max. operating pressure: 5 bar Temperature: 90 C° Weight: 110 kg

Condition: ready for operation (used), Used stainless steel reactor with double jacket and insulation Article number: 10255 Last application: Chemical industry Volume: approx. 7000L Operating pressure: +6/-1 bar Operating pressure double jacket: +12 bar Operating temperature: Max. 200°C Type: Standing on legs with supports Material (in contact with media): 1.4301 / AISI304 Design: Double jacket and insulated Bottom: Klöpper bottom Top: Klöpper bottom with flange ring Operating pressure according to nameplate: ATM Dimensions of the vessel: Gedod Dwkwjpfx Aivobu Vessel inner diameter: 1790mm Cylindrical height: 950mm Overall height: Approx. 1860mm Height of legs: 670mm Materials: Inside: 1.4301 / AISI 304 Outside: 1.4301 / AISI 304 / Painted steel Equipment: Top completely removable, flanged Insulation Double jacket around cylinder and bottom Various connections on the top Domed cover on the top

Condition: good (used), Used stainless steel reactor with double jacket, insulation, and agitator Article number: 10257 Last application: Chemical industry Volume: approx. 8000 L Operating pressure: +16/-1 bar Type: Standing on legs Material (in contact with media): 1.4301 / AISI304 Design: Double jacket and insulated Bottom: Klöpper bottom Top: Klöpper bottom Dimensions of the vessel: Vessel inner diameter: 2140 mm Cylindrical height: 1600 mm Overall height: approx. 3820 mm Height of legs: 710 mm Outer diameter: 2200 mm Distance from outlet to bottom: 500 mm Materials: Inside: 1.4301 / AISI 304 Outside: 1.4301 / AISI 304 / Painted steel Equipment: Insulation Double jacket around the cylinder Gbedpfed Dwmwjx Aivou Various connections on the top Dome lid on the top Agitator with double-acting mechanical seal

Year of construction: 2019, condition: good (used), Nilfisk Neptune 5-28 Industrial Power Washer Gbedoppa Imjpfx Aiveu The NEPTUNE 5 series features low running and maintenance costs, robustness, durability and high cleaning efficiency. Heating costs are reduced with the award-winning EcoPower boiler system with > 92% heating efficiency. Sound level is reduced thanks to the 1450 rpm motor. On board break tank with type AA airgap. EcoPower boiler with > 92% efficiency Full ceramic piston pump Reduced running costs1450 rpm motor with low noise level Quick Service concept reduces maintenance costs Easy to use control panel, all controls on one place ERGO quick change accessory system for additional user comfort Make an enquiry

Condition: used, smoke pipe connection diameter: 200 mm, nominal heat output: 55 kW (74.78 HP), Offering a used HDG heating boiler with a heating capacity of 55 kW for collection. Gjdpfx Aiezxf Hwevobu The boiler was manufactured in 1995 and is in excellent working condition. It can accommodate logs up to half a meter in length.

Condition: excellent (used), 3,000 L Complete Pilot Bioreactor / Fermentation System Complete 3,000 L pilot-scale bioreactor installation, fully skid-mounted and integrated on a stainless-steel frame. The complete system is built as an integrated stainless-steel skid installation, including the process vessel, pumps, piping, valves, instrumentation, control system, and auxiliary equipment. The skid is equipped with a platform and access stairs. The installation is highly suitable for testing, developing, and optimizing fermentation processes on a pilot scale. Main components: - Stainless-steel conical process vessel - Maximum working volume: 3,000 L - Heating/cooling jacket - Sampling connection - Custom-built sparger for air/gas injection - Cambridge Sensotec Rapidox 3100 off-gas analyzer - 4 × Watson Marlow 0XZ-63L/4 dosing pumps - Mettler Toledo InPro3250i pH sensor - MT 6850i DO sensor - Endress+Hauser TMR35 temperature sensor - Aerzen blower with 7.5 kW electric motor - 2 × 0.2 μm PTFE air filters - Bran+Luebbe N-K11 plunger pump - Netzsch 4NL30A and 4NL40A progressing cavity pumps - Recirculation system - Complete CIP system - Gas control system including control valves and MFCs - PLC control system for pumps, valves, temperature, DO, and other process parameters - SCADA system for monitoring, operation, data logging, and data export - DO cascade control - Complete stainless-steel skid/frame with platform and access stairs - Sweco vibrating sieve --> three decks, not visible in the pictures. - Sieve bend - Screw press - Aseptic capability with tank modification Gjdszw Rklepfx Aivebu The current installation is not designed as an aseptic system. However, the existing process vessel can be replaced with a suitable aseptic vessel, making it possible to adapt the installation for aseptic fermentation applications. Including documentation & technical knowledge from the manufacturer. In addition, all available technical knowledge regarding the installation, operation, and maintenance is available, providing an excellent basis for future commissioning, operation, and servicing. Complete Integrated Pilot System A highly versatile 3,000 L pilot fermentation system, combining process vessel, pumping, dosing, aeration, temperature control, CIP, process instrumentation, and advanced PLC/SCADA control in a complete stainless-steel skid-mounted installation. An excellent solution for pilot-scale fermentation development, process testing, and optimization.

Condition: like new (used), mileage: 80 km, power: 120 kW (163.15 HP), first registration: 12/2025, fuel type: diesel, overall weight: 3,500 kg, loading space length: 3,500 mm, loading space width: 2,200 mm, loading space height: 2,300 mm, Equipment: ABS, air conditioning, airbag, Renault Master Food Truck Catering unit with double sink, deep fryer, 1-meter griddle, 2-burner gas stove, and bain-marie. Gas supply system. Hygiene area with double washbasin, hot water boiler, and water canister for fresh and wastewater. Lighting. Exhaust hood. Serving station for GN containers with undercooling. And much more. More vehicles in stock! Gbedpjzyynxefx Aivou Demonstration vehicle / liquidation sale at a special price! Telephone inquiries will be given priority. We will gladly provide financing for the vehicle to businesses (Germany and Austria). More information on our website: www.Helmig-Verkaufsfahrzeuge.de

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Carlson Filtration Type FZ164 Filter Housing P/N: 5052164040 Diameter: 16"x4 Volume: 191L Year: 2015 Pressure PS: 0-8 Gsdpfoyq Ryhjx Aivjbu Test Pressure: 11.5Bar Fluid Group: 1 and 2 316L 4 pieces available Carlson housings modified for Pall SUPRAPak modules. Parts are still there to return to original set up

Year of construction: 2022, condition: like new (used), For sale is a professional Mobile CIP (Cleaning In Place) System manufactured by the renowned German brewery equipment manufacturer, Kaspar Schulz. The unit was manufactured in 2022/2023 and has never been used in regular production. It is in excellent, near-new condition. Ideal for: Craft breweries Industrial breweries Distilleries Beverage manufacturers Dairy industry Food processing plants Main Features: 2 × 210 L stainless steel tanks Fully automated WAGO PLC control system WAGO TP600 Touch Panel HMI Siemens SITRANS MAG 5000 electromagnetic flow meter Siemens MAG 1100 F DN40 sensor ProMinent chemical dosing pumps High-quality KPA process pump Stainless steel pipework and frame Complete electrical control cabinet Gbsdozm R Amspfx Aivju Technical Specifications: Manufacturer: Kaspar Schulz (Germany) Year of manufacture: 2022/2023 Tank capacity: 2 × 210 liters Power supply: 3 × 400 V / 50 Hz Current: 19 A Main fuse: 32 A Maximum operating temperature: 80°C Flowmeter: Siemens SITRANS MAG5000 + MAG1100F Control: WAGO PLC + TP600 Touch Panel Condition: The machine has never been used in continuous production. Excellent cosmetic and technical condition. Can be inspected in Wrocław, Poland. Worldwide shipping can be arranged. VAT invoice available. Additional photos, videos, and technical documentation are available upon request.

Condition: excellent (used), Year of construction: 2000, tank capacity: 8,190 l, total width: 2,500 mm, total height: 5,100 mm, overall weight: 8,600 kg, operating temperature: 120 °C, negative pressure: -1 Pa, pressure (max.): 6 bar, Enameled reactor manufactured by PFAUDLER, model BE6300. The equipment does not include peripherals. Gedpfexn Nibjx Aivebu

Condition: new, Year of construction: 2026, usable tank capacity: 250 l, total length: 1,800 mm, total width: 1,300 mm, total height: 2,450 mm, overall weight: 850 kg, Equipment: CE marking, New COSMOS 250 emulsifying reactor, manufactured by COMQUIMA in 2026. Stainless steel skid, AISI 316 in all parts in contact with the product, with a useful capacity of 250 liters. It consists of a jacketed reactor and an agitation system with scrapers and homogenization: AGITATION: FULLVISC system with laminar flow and scrapers. Exclusive 3-arm design with scrapers. Nominal speed of 40 rpm and power of 4 kW. HOMOGENIZATION: High-shear emulsifier M.X.O.N. 120. Mechanical seal with safety sealing. Nominal speed of 2,900 rpm and power of 5.5 kW. Designed to centralize the production of fine emulsions, suspensions, and high-viscosity products in a single unit, which is easily handled by forklift or pallet truck. It allows processing products up to 70,000 cps and achieving a particle size of 10 μm. The unit is controlled by an integrated control panel and includes a vacuum pump, CIP cleaning balls, load cells on the legs, and hydraulic pistons for lifting the upper bottom. Optionally, a temperature control system can be added to carry out heating and cooling of the jacket. Equipment configuration: Agitator Jacket Pressurized CIP On legs Gbjdpfx Aiozkkchevsu Central hydraulic unit Load cells Vacuum pump HMI screen integrated into the equipment Transportation information: Length 1,800 mm Width 1,300 mm Height 2,450 mm Weight 850 Kg Documentation: CE certificate Operating manual Sectors: FOOD PHARMACEUTICAL CHEMICAL COSMETIC New

Year of construction: 2012, condition: used, Membrane press Manufacturer: Columbus Type: Vakuform Sonder Year of manufacture: 2012 Technical data - Must be connected to an external vacuum pump Gbjdpfx Aijzuz Ebsvju - 750 watts, 230/380V, 50 Hz - Boiler capacity: 200 l - Suction capacity: 25 m3/h - Vacuum: max. 0.85 bar - Working area: 2000 x 1350 mm Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2009, Wood chip heating system, Fröling Turbomat 500, feed grate firing system, output 500 kW, year of manufacture 2009, including feed screw and backfire protection, including ash removal, automatic ignition, including control system, including exhaust gas recirculation with fan. The fireclay lining needs to be partially replaced! Dismantling must be carried out by the buyer! System is fully functional! Not included: Gbjdjvgcqyopfx Aivsu - Bunker discharge system - Chimney - Boiler pump with mixing valve

Condition: used, mileage: 127,000 km, power: 114 kW (155.00 HP), first registration: 01/1998, fuel type: diesel, overall weight: 7,500 kg, next inspection (TÜV): 08/2027, color: silver, gearing type: mechanical, emission class: euro2, number of seats: 2, total length: 9,100 mm, total width: 2,550 mm, total height: 3,580 mm, loading space volume: 17 m³, loading space length: 6,900 mm, loading space width: 2,400 mm, loading space height: 2,360 mm, Equipment: parking heater, Complete hair salon on a 7.5-ton truck. Fully equipped and used extensively until recently. Gbodpozwrtusfx Aivju This is the 2nd unit of the original "1st mobile hair salon," also available from us, which was invented and built in southern Germany in the 1990s. This truck is ideally suited as a mobile hair salon during major renovation or refurbishment work on your own hair salon. Another business model would be renting it out. The buyer of the truck will also be assigned the patent, granting them the exclusive right to use this specific vehicle for commercial purposes. However, the patent cannot be transferred to other vehicles/objects. The MAN has a large box body, originally a refrigerated vehicle. Therefore, it is thermally well-insulated. Air conditioning is provided by a mobile air conditioning unit with remote control. In addition, there is an electric heater. 4 customer/hairdresser stations with height-adjustable swivel chairs, arranged at a slight angle. Plus 1 separate washbasin at the rear. In fact, there is plenty of space everywhere to work, so several professionals can cut multiple customers' hair simultaneously without constantly getting in each other's way. The salon is completed by a reception desk, coat rack, magazine rack, as well as several small cabinets/drawers and sales shelves. The main work area is approximately 5.90 m long. In front of it is a separate area of approximately 1.00 m with a washbasin for the employees. This area also houses the hot water boiler and the fuse box, as well as shelves and storage space. There are also 2 hair dryers, which are, of course, included in the offer. The overall dimensions of the box body, interior approximately: 6.90 m long (5.90 m main area plus 1.00 m separate area), 2.40 m wide, 2.36 m high. Overall, the box body has a remarkably spacious feel - for both customers and employees. This mobile hair salon has approximately 17 square meters of total space. The salon can be accessed via an aluminum staircase, which is permanently mounted on the rear right and can be folded down slightly. The matching handrails, which are on both sides, are currently lying on the floor inside the box body for transport, see photos. Large storage boxes under the box body contain connection pieces for electricity, water supply, and wastewater drainage. The vehicle must be connected to external supply lines for operation. A 230-volt system is installed inside. The external power connection is made via a 32A plug. The truck chassis is a solid MAN 8.163 LLC from the then very modern and comfortable L2000 series. Four-cylinder diesel engine with 4580 ccm, Euro 2 and manual transmission. Wheelbase: 4900 mm. An analog tachograph is installed. The top speed is 98 km/h, but the permitted speed in Germany is 80 km/h. Unladen weight 7000 kg according to the documents, permissible total weight 7500 kg. According to the vehicle documents, the current registration type is "Other Motor Vehicle - Hair Salon Truck". When operating the business, this truck may be exempt from tolls. The MAN has leaf springs at the front and air suspension at the rear with a raising and lowering function at the driver's seat. The tires, size 215/75R17.5, all have a nearly new tread depth. A spare tire is mounted on the frame. The entire truck has only covered 127,000 kilometers. The vehicle was deregistered in August 2026. The TÜV (German technical inspection) was renewed in August 2026 and is valid until 08/2027. C