Used Ama Recycling Technologies Sink-Float Tank, Centrifuge, Screen for sale (41,816)

Condition: used, This listing is for a Thermo Fisher Scientific Sorvall RC6+ Centrifuge The unit is in full working condition and is ready for immediate release. The Sorvall RC 6 Plus is a high-speed, refrigerated floor-standing centrifuge designed for large-volume separations in research, bioprocessing or production labs. According to the manufacturer, it: Is capable of speeds up to 22,000 rpm (which corresponds to about 55,200 ×g) without needing a vacuum system. Handles up to 4 × 1,000 mL bottles in a single run (i.e., ~4 L total) in its standard configuration. Uses a brushless high-frequency motor drive, and has full refrigeration for temperature control. Offers a broad rotor compatibility platform (including composite, aluminium, continuous flow etc) for different In short: this is a heavy-duty centrifuge for larger volumes and higher speeds, suited to labs that need more capacity and performance than benchtop or mid-range units. Key Features & Highlights Here are some of the standout features: Speed & G-force: Up to 22,000 rpm, approx. 55,200 ×g. Capacity: 4 bottles of 1,000 mL (4 L total) in typical configuration. Temperature control: Ability to set in range from -20 °C to +40 °C (in 1 °C increments), and maintain temperature accuracy of ±2 °C. Psdpfxsxukkyo Agxsgp Motor/drive: Brushless high-frequency motor = faster spin up/downs, lower maintenance than older belt drives. Programmability & control: Up to 30 stored programs, with features like real-time control (delayed start/stop), ω² dt (integrator) for reproducibility, pre-cool function, and both rpm and RCF display. Safety & interlocks: Automatic lid-lock when running, door cannot be opened while rotor is spinning, and run terminates automatically in the event of certain malfunctions. Rotor flexibility: Supports a wide selection of rotors (fixed-angle, swinging bottle/bucket, continuous flow), including composite carbon-fibre rotors for higher performance / durability

Condition: used, This listing is for the Sigma 2-15 Centrifuge +Accessories Shown The unit is in full working condition and is ready for immediate use The Sigma 2‑15 is a benchtop (tabletop) laboratory centrifuge produced by Sigma (Sigma Laborzentrifugen GmbH), designed for moderate-speed separation tasks across various scientific and industrial settings Key Features & Specifications: Purpose: Used to separate sample components (e.g., cells, sediments) through centrifugal force—ideal when high speed isn't required Power & Voltage: Operates at 240 W, 220–240 V, 50 Hz Speed: Centrifuge motor: up to 13,500 rpm. Podpfx Aoxhffrsgxsgp Rotor-specific max: up to 15,300 rpm, depending on rotor type . Capacity: Typical configuration includes 4 buckets, each capable of holding up to 100 ml (e.g., rotor 11192 with buckets 13012) Some versions deploy a fixed-angle rotor (e.g., 12189) with capacity around 480 g Dimensions: Compact footprint of approximately 33 × 43 × 30 cm (W × D × H) . Other Features: Microcontroller-based control of speed and time. Multiple acceleration/deceleration curves and program memory (up to 10 programs) in some configurations Magnetic rotor identification (prevents overspeeding) and induction drive for low maintenance

Condition: used, This listing is for the Veolia/Elga PC1ANRXM2 Purelab Chorus Pgsdexv A Uaopfx Agxep The unit is in full working condition and is ready for immediate release The Veolia ELGA PURELAB Chorus 1 Complete is a high-performance water purification system engineered for laboratories demanding the highest water purity. It is ideal for supporting analytical research, quality control (QC) testing, and pharmaceutical manufacturing processes, delivering reliable Type I ultrapure water. Key Specifications Water Quality: 18.2 MΩ·cm resistivity (Type I) Flow Rate: Up to 20 litres per hour Features: Advanced PureSure® deionization for consistent water quality Fully recirculating system to maintain microbial purity Real-time TOC monitoring to ensure organic purity Integrated filtration for endotoxins, proteins, particulates USB data capture for performance validation Optional ELGA Biofilter for biologically active impurities Cost-effective design supporting QC testing to validate drug purity in pharmaceutical manufacturing Consumables engineered to minimise cost and environmental waste Ideal Applications Analytical Research Life Sciences Pharmaceutical QC Testing Glassware Washing and Ultrapure Feed Systems

Condition: excellent (used), Item: D-10800-BacTerminator BacTerminator BTM10FD11001 Water Disinfection Equipment Podpfx Agoh Dxqvoxjgp Inclusive pumps, Control and other accessories. Nice condition

Year of construction: 2006, condition: refurbished (used), functionality: fully functional, We are offering this refurbished MG Recycling M_04772 cable granulator, manufactured in 2006. It underwent a major overhaul in 2024. Psdpfjy D Ug Tsx Agxegp New switchgear control cabinet, new knife sets. Wagner pre-shredder, type WS 15, manufactured in 2007, 15 kW. Feed conveyor, extraction system, and magnetic vibrating table, manufactured in 2021. Output: approximately 150 - 180 kg/hour, depending on the material. Location: Switzerland, 8260 Stein am Rhein. Asking price: EUR 59,000 (negotiable) If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2010, operating hours: 2,125 h, functionality: fully functional, MG Recycling – Copper Cable Granulation Line Manufacturer: MG Recycling Type: Matrix400 Complete cable granulation line Condition: Very good – In perfect working order Availability: Immediate Technical description: Cable granulation line including: • Pre-shredder, completely overhauled recently o All rotor bearings are new Psdpfjx It N Uex Agxjgp o Gearbox bearings are new • Conveyor with magnetic rollers for scrap separation • Metering hopper • Feeding conveyor • Blade mill with 3 / 4 / 5 mm sizing screens • Separation by cyclone and zig-zag separator • Finishing turbo • Density separation table • Dust extraction with bag filter Spare parts: • Pre-shredder: 1 set of knives + counter knives • Blade mill: 3 sets of blades and counter blades Capacity: ≈ 200 kg/h of finished product Application: Processing and recycling of copper cables Price: €95,000 (Complete processing line) Spare parts: €20,000 Additional information: • Photos and further information available upon request 📩 Contact us for more information.

Year of construction: 2005, condition: good (used), machine/vehicle number: 756, Thermal CTP PT-R4300 (Computer to Plate) Recording System: External Drum PST 26 Plate Stacker Glunz & Jensen Interplater MP 85: Thermal Plate Processor Technical Details: Throughput option (plates/h in max. format) : 20 Plates / Hour Light Source: 32-channel infrared laser diodes Min. Plate Format : 324 x 370 mm Maks. Plate Format : 830 x 660 mm Psdpfxjfh Dmze Agxsgp Maks. Imaging Format : 830 x 633 mm Plate Thickness : 0,15 - 0,3 mm Machine Dimensions L x W x H : 1,750 x 1,030 x 1,178 mm Technical data can vary according to job, consumables and possible other factors

Year of construction: 2007, condition: good (used), machine/vehicle number: 10369, Thermal CTP PT-R4300 E: Computer to Plate Recording System: External Drum 2 x SA-L4100 Single Autoloader: Fully Automatic loading of 50 Plates & automatic interleaf removal PST 26 Plate Stacker Bacher Punch 425 for PT-R4000 ADARA TH 85: Cleaning and Gumming unit for chemistry-free thermal CTP Plates Pgodpfx Agofh Dm Nsxep Technical Details: Throughput option (plates/h in max. format) : 10 Plates / Hour Light Source: 16-channel infrared laser diodes Min. Plate Format : 324 x 370 mm Maks. Plate Format : 830 x 660 mm Maks. Imaging Format : 830 x 633 mm Plate Thickness : 0,15 - 0,3 mm Resolution : 2,400 - 2,438 - 2,540 dpi Machine Dimensions L x W x H : 1,750 x 1,030 x 1,178 mm Technical data can vary according to job, consumables and possible other factors

Condition: new, Year of construction: 2026, functionality: fully functional, 600 HD available immediately Serialnumber 965 Pjdjib Ircjpfx Agxegp Special price from our stock 06188 Landsberg, Germany The 600HD alligator shear is a fast and strong metal cutting shear with an extended hold down clamp, making it ideal for every cutting and cleaning task whether cable, plastic sections or window frames. Its cutting capacity is up to 63mm, 2″ inch mild steel round bar. The 600HD alligator shear is probably best known for dealing with car radiators. It was designed and built following requests from customers who were looking for a shear with a longer blade to cut larger items such as car radiators which it cuts through in one pass. The automatic hold down clamp holds material in place during the cutting cycle and prevents kick back which speeds up processing and improves operator safety. As with all McIntyre shears, opening and closing the jaws is controlled from a moveable foot pedal. As soon as the foot pedal is released, the cutting blades return to the open position. However, a continuous cutting action can be achieved by keeping foot pressure on the pedal. The 600HD can be supplied with an electric motor or with a 2-cylinder diesel engine.

Condition: new, End-facing and length grinding machine Manufacturer: HERZOG Model: LY 600 400V version Length tolerance: ± 0.01 mm Angularity: ± 0.01 mm Diameter range: 1 – 25 mm Dimensions: 430 x 360 x 500 mm Weight: 87 kg Accessories: - Measuring stop with micrometer screw - Cup grinding wheel and cut-off wheel - Operating manual Pjdpfx Aod Idb Iogxegp

Year of construction: 2018, condition: like new (used), functionality: fully functional, machine/vehicle number: M.66999.999.92, Take advantage of this unique opportunity to acquire an immediately available, like-new machine from the world-renowned premium manufacturer FRIMO. This is a fully assembled and 100% operational special machine for thermoforming/vacuum lamination, which, due to a cancelled project, never went into series production and is therefore in like-new condition. Machines of this type are often found in the premium automotive sector worldwide. One of the special features of this machine is its large forming area of up to 1,200 x 2,200 mm and its very flexible range of applications, due to its modular design and many special functions. Detailed description: Versatile ECO single-station laboratory machine or ECO single-station in-line machine for series production. Depending on the application, whether as a laboratory machine or for series production in in-line operation, and depending on the type of frame (fixed or adjustable frame), the maximum available forming area is defined. Forming areas: (with currently available frames) In-line operation: 810 x 2,205 mm (min. 465 x 490 mm) Single-station operation: 970 x 1,970 mm (min. forming area, linear: 465 x 490) Pjdpfx Aozd Unbogxegp With newly manufactured frame: Single-station frame, fixed: 1,200 x 2,200 mm & single-station frame, adjustable: 1,130 x 2,200 mm Linear frame, fixed: 1,200 x 2,200 mm & linear frame, adjustable: 900 x 2,200 mm Maximum lower tool or molded part height: 470 mm Maximum tool package height for installation with upper tool: 800 mm (821 mm) Maximum upper tool height: 650 mm Number of upper platens (molds and dies): 2 Machine equipment: - Movable heater - Chain rail for automatic film feed - Clamping frame or series frame can be used Different heaters available for interchangeable use, depending on requirements: - R5 0302 D vacuum pump (300 m3/h) - 1000 L vacuum tank - 6 cooling fans DNG 6-22.5 for accelerated cooling times (including cooling air with water cooling) - Maximum lifting capacity of lower and upper tools: 4,000 kg each 1.) IR heater (Ushio) 2.) Quartz heater (TQS) (Depending on the process and material, with its specific advantages) If you have any questions, please do not hesitate to contact us. Sincerely / Best regards i.V. Alexander Reizner Sales and Project Management Service FRIMO Innovative Technologies GmbH

Condition: new, Year of construction: 2026, Item: A-12068 (11137) Vertical tank 50m3 NEW tank: Capacity 50,000 L External dimensions: Diameter Ø 3000 mm, total height 8,400 mm. Vertical stainless steel tank, 5 units available for sale Podpsy Aty Nefx Agxegp Conical top and bottom, bottom manhole, and stainless steel legs. AISI 304 or AISI 316 Can be delivered with optional insulation in trapezoidal plates and agitators.

Condition: used, Year of construction: 2018, only approx.16K plates done Podpsyt I Unjfx Agxjgp Format 830 x 660 mm Apogee Workflow RIP Inlinepunch Azura C95 Clean out unit Stacker ST 95EX Available: at short term

Condition: used, functionality: fully functional, fuel type: diesel, color: yellow, Supra Technologies - Vacuum Machine for Applying Paving Stones / Tiles / Slabs Excellent condition | Lightly used 🔹 Price: €60,000 Professional Supra Technologies vacuum machine for applying paving stones, tiles, and slabs. Equipment in excellent condition, used but very well maintained and with excellent performance. Ideal for paving companies, civil construction, marble workshops, and large-scale projects. Advantages: Significantly simplifies and speeds up the handling and application of heavy pieces. Reduces physical effort and the risk of accidents. High precision in positioning. Psdpezcwm Ejfx Agxjgp Robust and reliable (a leading brand in the industry). It is functioning perfectly and ready to continue producing results.

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Individual price per unit: €2500. We are selling three inkjet printers from Linx Printing Technologies Limited, Model 8900, manufactured in 2015. The printers have been regularly serviced and are in perfect working order. The roller cart is included with the purchase of the printer. Pjdpey U Utnofx Agxjgp If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Manufacturer: Speidel Tank and Vessel Construction Year of manufacture: 2020 Technical specifications: Net capacity: approx. 1,250 liters Material: Stainless steel 1.4404 / AISI 316L Design: insulated (with thermal jacket/insulation jacket) Internal surface: suitable for food/pharmaceutical use Operating pressure: atmospheric (storage tank) Temperature range: suitable for temperature-controlled media Connections: hygienic clamp fittings Manway: available Bottom: conical (complete drainage) Legs: height adjustable Application: The tank is ideally suited for the storage of pharmaceutical, cosmetic, or food-grade liquids. The tank was used as a CIP vessel in a pharmaceutical facility and was operated under hygienic conditions accordingly. Typical applications include: - Intermediate storage of bulk goods Pgsdpfey I Skwsx Agxep - CIP feed tank - Storage of alcohol, cleaning, or disinfectant solutions - Process integration in filling lines Construction: - Premium stainless steel construction (316L) - Insulated tank for temperature-controlled processes - Hygienic design with clamp fittings - Conical bottom for complete residue drainage - Industrial-grade build from German manufacturer Speidel Condition: - Very good condition - Used, well maintained - Immediately available FAT / Documentation: - Operation manual available - Manufacturer documentation included Scope of delivery / Documentation: - Complete stainless steel tank - Insulation jacket - Documentation / operation manual - Nameplate present Special features: - German brand quality (Speidel) - Suitable for pharmaceutical, cosmetic, and food applications - Ideal as a CIP feed or buffer tank - Compact design with high quality

Condition: good (used), All information is provided without warranty. Psdpsfd R Ahjfx Agxegp A demonstration is possible at any time in our showroom.

Condition: good (used), Year of construction: 2007, Screen PT-R16000II, year 2007 Manual plate loading Internal plate cutter Laser head with GLV technology Plate format: 1470 mm x 1165 mm Up to 16 plates/hour in full format Pjdpfxjzhm Arj Agxegp 199,000 exposed plates Online L bridge to G & J Quartz III 125 plate developer AGFA ST 125 SX plate stacker Screen EP-B101 network interface Eqious RIP/Workflow All offers are valid subject to prior sale.

Condition: good (used), Stainless steel tank 5000 L with mixer, cooling. In good condition Pgjdpfx Agsvr E N Noxjp They have a built-in pipe around the tank that can cool

Condition: used, Compressed air system with compressed air compressor and compressed air tank - KAESER SK26 screw compressor (built in 2005) - Gebre GmbH compressed air tank with a capacity of 750 litres (built in 1996), standing on 3 feet with pressure gauge. Additional title: air compressor with compressed air tank Delivery appr.: 2,2 m3/h Max. working overpressure compressor: 10 bar Gross volume compressed air tank: 750 l Max. working overpressure compressed air tank: 11 bar Power: 15 kW Current: 400 V Voltage: 35 A Pedpsw Tbtkofx Agxsgp Frequency: 50 Hz Length: 0,8 m Width: 0,8 m Height: 1,03 m Weight: 290 kg Operation / Control: control panel on compressor Base construction: tank vertical on 3 feet Features: air compressor, compressed air tank

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, input voltage: 230 V, measuring range X-axis: 200 mm, measuring range Y-axis: 85 mm, measuring range Z-axis: 50 mm, total width: 483 mm, total length: 598 mm, total height: 464 mm, overall weight: 64 kg, input current: 5 A, repeat accuracy: 0.005 mm, input frequency: 50 Hz, Equipment: CE marking, USB port, documentation/manual, type plate available, PG1000-400 – Optical system for inspecting the geometry of rotating cutting tools PG1000-400 is a professional optical measuring and inspection system for quickly checking the geometry of cutting tools. It is designed for tool manufacturers, sharpening shops, grinding shops, tool rooms, CNC machining centers, and quality control/metrology departments. Its main application is the inspection of rotating cutting tools after manufacturing, grinding, sharpening, or reconditioning. The system is suitable for HSS and solid carbide tools, especially drills, end mills, step drills, reamers, taps, form tools, micro tools, and custom-made tools. The device can also be used to inspect carbide inserts, selected thread geometries, screws/bolts, and other precision parts, provided that the geometry being inspected is optically accessible to the camera. The system's primary focus is on the inspection of cutting tool geometry. Typical applications: - In-process inspection directly at the grinding machine or in production - Incoming and outgoing inspection of tools - Inspection after sharpening/regrinding - Quality documentation and measurement reports - Repeated inspection of serially produced tools PG1000-400 allows for the inspection of, for example: - Rake angle and clearance angle - Helix angle - Point angle for drills - Radii and corner radii - Diameters and distances - Cutting edge length - Land width, margin width, facets - Web thickness - Tool profile - Runout - Condition and wear of the cutting edge - Comparison of geometry with DXF/DWG drawings The system operates optically and non-contact. This is advantageous when inspecting sharp edges, fine microgeometries, coated tools, and precise edges, where speed, repeatability, and minimizing operator influence are important. The system includes REACTION software, developed specifically for the inspection of cutting tools. The software offers more than 50 measuring functions, edge detection, automatic alignment of measuring points to the edge, saving inspection scenes, comparison with DXF/DWG geometry, PDF reports with PASS/FAIL evaluation, and data export to Excel/CSV. Technical specifications: - Recommended tool diameter: 0.635–75 mm - Tool measuring length: approx. 190–200 mm - Magnification range: 12.5× to 145× - Camera: 5 MP - Monitor: 27" 4K Ultra HD - Measuring range: 85 mm vertically × 200 mm horizontally - Accuracy/repeatability: ±5 µm at maximum magnification - Device dimensions: approx. 598 × 483 × 464 mm Pgjdozdz S Tepfx Agxep - Weight: approx. 64 kg Offered configuration: - PG1000-400 optical cutting tool inspection system - M / F / A encoders - PC with REACTION software - 27" 4K Ultra HD monitor - Flexible LED lighting with diffuser - Curved magnetic diffusion plate - Rotating base block for clamping fixtures - 1000-026-5"-ASS – 5" V-block assembly with insert, top clamp, and stop - Basic remote operator training About the manufacturer: PG1000 is based on the long-term development of systems for inspecting cutting tools. The first generation of PG1000 was introduced in 1993. The system is manufactured in the USA by PG Inspection Technologies LLC, which specializes in this product line. Since 1996, more than 1000 PG1000 systems have been delivered. Condition and delivery: - New machine - Year of manufacture: 2026 - Warranty: 12 months - Location: Czech Republic / EU - Delivery, assistance with commissioning, and training according to agreement - CE marking and relevant EU documentation The device i

Year of construction: 2026, condition: new, original Screen laser diodes Pgodpfjdmdvvex Agxop 100212447V01 Diode fiber 500 mW for Screen PT-R8600 & OEM (64 channel) new & second-hand All offers subject to prior sale

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2021, The Massivit 5000 3D printer enables ultra-fast custom manufacturing for both the visual communication market and industrial sectors such as the automotive, aerospace, railway, and marine industries. Equipped with a dual-material system and two printheads, the M5000 allows you not only to print two different objects but also to print with two different materials simultaneously. The extraordinary build volume of 145 x 111 x 180 cm enables the production of full-scale parts in no time. Large, complex forms are no challenge for this machine. Furthermore, a variety of materials is available for the machine. Pgjdoxwpvgopfx Agxop

Condition: used, machine/vehicle number: MPK5000, functionality: unexamined, Used Neon invitrigen Transfection System with Pipette holder. Manufacturer: Life Technologies Model: MPK5000 Pjdsxp I Thepfx Agxegp Voltage: 100-240V (50/60Hz)

Condition: excellent (used), Year of construction: 2011, Plate trolley for SCL (100 plates) - Screen 4000x - Agfa Pgodoy Rh Rljpfx Agxop - Fuji